The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass ACP pci revision id as resource data and store it in amd SoundWire
manager private data structure. This field will be used to differentiate
ACP variants.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240924081846.1834612-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
-----BEGIN PGP SIGNATURE-----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=FNSV
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Simplification across subsystem using cleanup.h
- Support for debugfs to read/write commands
- Few Intel and Qualcomm driver updates
* tag 'soundwire-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: debugfs: simplify with cleanup.h
soundwire: cadence: simplify with cleanup.h
soundwire: intel_ace2x: simplify with cleanup.h
soundwire: intel_ace2x: simplify return path in hw_params
soundwire: intel: simplify with cleanup.h
soundwire: intel: simplify return path in hw_params
soundwire: amd_init: simplify with cleanup.h
soundwire: amd: simplify with cleanup.h
soundwire: amd: simplify return path in hw_params
soundwire: intel_auxdevice: start the bus at default frequency
soundwire: intel_auxdevice: add cs42l43 codec to wake_capable_list
drivers:soundwire: qcom: cleanup port maask calculations
soundwire: bus: simplify by using local slave->prop
soundwire: generic_bandwidth_allocation: change port_bo parameter to pointer
soundwire: Intel: clarify Copyright information
soundwire: intel_ace2.x: add AC timing extensions for PantherLake
soundwire: bus: add stream refcount
soundwire: debugfs: add interface to read/write commands
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240429004935.2400191-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmZMTBMACgkQfBQHDyUj
g0cLwxAAs2BjcTzYcYX+bPQGBWb8Fvzm7/vKQrkPiZTVm0TtKL5EB2CBzqo+xhpf
DIUNw9nNECswmS4X6J3vPZs4cYeIYgmrXXs0Wt+kB5YFsvYoM/aHNyxvwWheAcPg
atzv4x0leYnmwD8rFwCER4jVNaUw54dy9L/SurCSxMEzpp48bkZyD4fAaAgO3I8x
Ou0vZHEctev2s4cbSnnZhQnkcQdTfk2q93OrUtoWx0BaXA71HGds+tyJhM9iuih4
wpRvZvX7xYscohNEJxx0scks14dd8DvVklCWRc14mCYeUK32uX02cTUqDXZdr/SX
Ljy/GjMKCcVlA75KIP47iqtsMZATqG/kJZQWps4lobJulinvkFaPO5BNZ1B0qpvm
Y6zkMLQjF6YdP6DZnWvfp6+Zc8WOLnzDGiIhvnCL7YDMqVZwaJqurvVeTcX66K5l
1cB9BkgXamqS38aI4Zu/qr8vxVuhZK0Os/5/k2MJQhjzFb8tmK66oKEJ42kawK4X
X1ZE4sUdsYbp3CR184FXXpzOeKsxjBiao2E8t1EEFgVPCvIFsa9TjjPWs+bGQ9jq
iixdQXawzv1kwOuT5DzyDwRvwHe46o8zG5yR3kqu64EAzdcg8tspdtODsw2ZV1FJ
EvALOC3bw6PJkOpurRFjijGrqFbWKSkgxOUkgR3GKExX/bd8NPQ=
=H/AJ
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- cleanup and conversion for soundwire sysfs groups
- intel support for ace2x bits, auxdevice pm improvements
- qcom multi link device support
* tag 'soundwire-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (33 commits)
soundwire: intel_ace2.x: add support for DOAISE property
soundwire: intel_ace2.x: add support for DODSE property
soundwire: intel_ace2x: use DOAIS and DODS settings from firmware
soundwire: intel_ace2x: cleanup DOAIS/DODS settings
soundwire: intel_ace2x: simplify check_wake()
soundwire: intel_ace2x: fix wakeup handling
soundwire: intel_init: resume all devices on exit.
soundwire: intel: export intel_resume_child_device
soundwire: intel_auxdevice: use pm_runtime_resume() instead of pm_request_resume()
ASoC: SOF: Intel: hda: disable SoundWire interrupt later
soundwire: qcom: allow multi-link on newer devices
soundwire: intel_ace2x: use legacy formula for intel_alh_id
soundwire: reconcile dp0_prop and dpn_prop
soundwire: intel_ace2x: set the clock source
soundwire: intel_ace2.x: power-up first before setting SYNCPRD
soundwire: intel_ace2x: move and extend clock selection
soundwire: intel: add support for MeteorLake additional clocks
soundwire: intel: add more values for SYNCPRD
soundwire: bus: extend base clock checks to 96 MHz
soundwire: cadence: show the bus frequency and frame shape
...
When SoundWire Wake interrupt is enabled along with SoundWire Wake
enable register, SoundWire wake interrupt will be reported
when SoundWire manager is in D3 state and ACP is in D3 state.
When SoundWire Wake interrupt is reported, it will invoke runtime
resume of the SoundWire manager device.
In case of system level suspend, for ClockStop Mode SoundWire Wake
interrupt should be disabled.
It should be enabled only for runtime suspend scenario.
Change wake interrupt enable/disable sequence for ClockStop Mode in
system level suspend and runtime suspend sceanrio.
Fixes: 9cf1efc5ed2d ("soundwire: amd: add pm_prepare callback and pm ops support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240327063143.2266464-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Define common inline function for register update.
Use this inline function for updating SoundWire Pad registers
and enable/disable SoundWire interrupt control registers.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20240327063143.2266464-1-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Register mask array structure is no longer needed as except interrupt
control masks, rest of the register masks are not used in code.
Use array for interrupt masks instead of structure.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://msgid.link/r/20240129055147.1493853-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As sdw pads enable sequence is executed only once, invoke it from probe
sequence.
Program required pads for both manager instances based on link_mask during
probe sequence. This will avoid acquiring mutex lock.
Remove unnecessary delay after programming ACP_SW_PAD_KEEPER_EN register.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://msgid.link/r/20240129055147.1493853-6-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactor amd SoundWire manager device node creation logic and implement
generic functions to have a common functionality for SoundWire manager
platform device creation, start and exit sequence for both legacy(NO DSP)
and SOF stack for AMD platforms. These functions will be invoked from
legacy and SOF stack.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://msgid.link/r/20240129055147.1493853-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update license to dual license to align with Sound Open Firmware (SOF)
driver as SOF uses dual license.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://msgid.link/r/20240129055147.1493853-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
max_dr_freq and curr_dr_freq is calculated and set in
sdw_bus_master_add(). Setting in the driver is reduanant, so drop that.
Set max_clk_freq instead.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20231129130449.9892-1-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The existing SoundWire support misses a clear Controller/Manager
hiearchical definition to deal with all variants across SOC vendors.
a) Intel platforms have one controller with 4 or more Managers.
b) AMD platforms have two controllers with one Manager each, but due
to BIOS issues use two different link_id values within the scope of a
single controller.
c) QCOM platforms have one or more controller with one Manager each.
This patch adds a 'controller_id' which can be set by higher
levels. If assigned to -1, the controller_id will be set to the
system-unique IDA-assigned bus->id.
The main change is that the bus->id is no longer used for any device
name, which makes the definition completely predictable and not
dependent on any enumeration order. The bus->id is only used to insert
the Managers in the stream rt context.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/stable/20231017160933.12624-2-pierre-louis.bossart%40linux.intel.com
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This code has two problems:
1) The devm_ioremap() function returns NULL, not error pointers.
2) It's checking the wrong variable. ->mmio instead of ->acp_mmio.
Fixes: d8f48fbdfd9a ("soundwire: amd: Add support for AMD Manager driver")
Suggested-by: "Mukunda,Vijendar" <vijendar.mukunda@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9863b2bf-0de2-4bf8-8f09-fe24dc5c63ff@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Returning an error code in the remove callback yields to an error
message
remove callback returned a non-zero value. This will be ignored.
After that the device is removed anyhow. Improve the error message to at
least say what the actual problem is. While touching that code, convert
the driver to the .remove_new() callback which returns no value with the
same effect as returning zero in a .remove() callback.
As the return value is ignored by the core the only effect of this patch
is to improve the error message. (And the motivating effect is that
there is one less driver using .remove().)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230518200823.249795-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
