The comment refers to a list in the respective delayed ref head that no
longer exists (ref_list), it was replaced with a rbtree (ref_tree) in
commit 0e0adbcfdc90 ("btrfs: track refs in a rb_tree instead of a list").
So update the stale comment to refer to the rbtree instead of the old
list.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use a red black tree (rb-tree) to track the delayed ref
heads (in struct btrfs_delayed_ref_root::href_root). This however is not
very efficient when the number of delayed ref heads is large (and it's
very common to be at least in the order of thousands) since rb-trees are
binary trees. For example for 10K delayed ref heads, the tree has a depth
of 13. Besides that, inserting into the tree requires navigating through
it and pulling useless cache lines in the process since the red black tree
nodes are embedded within the delayed ref head structure - on the other
hand, by being embedded, it requires no extra memory allocations.
We can improve this by using an xarray instead which has a much higher
branching factor than a red black tree (binary balanced tree) and is more
cache friendly and behaves like a resizable array, with a much better
search and insertion complexity than a red black tree. This only has one
small disadvantage which is that insertion will sometimes require
allocating memory for the xarray - which may fail (not that often since
it uses a kmem_cache) - but on the other hand we can reduce the delayed
ref head structure size by 24 bytes (from 152 down to 128 bytes) after
removing the embedded red black tree node, meaning than we can now fit
32 delayed ref heads per 4K page instead of 26, and that gain compensates
for the occasional memory allocations needed for the xarray nodes. We
also end up using only 2 cache lines instead of 3 per delayed ref head.
Running the following fs_mark test showed some improvements:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
MOUNT_OPTIONS="-o ssd"
FILES=100000
THREADS=$(nproc --all)
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 5 -n $FILES -s 0 -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Before this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 171845.7 12253839
16 2400000 0 230898.7 12308254
23 3600000 0 212292.9 12467768
30 4800000 0 195737.8 12627554
46 6000000 0 171055.2 12783329
After this patch:
FSUse% Count Size Files/sec App Overhead
10 1200000 0 173835.0 12246131
16 2400000 0 233537.8 12271746
23 3600000 0 220398.7 12307737
30 4800000 0 204483.6 12392318
40 6000000 0 182923.3 12771843
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add some comments to struct btrfs_delayed_ref_root's fields to mention
what its spinlock protects.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One of the following patches in the series will need to access fs_info at
btrfs_delete_ref_head(), so pass a fs_info argument to it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One of the following patches in the series will need to access fs_info in
the function find_ref_head(), so pass a fs_info argument to it as well as
to the functions btrfs_select_ref_head() and btrfs_find_delayed_ref_head()
which call find_ref_head().
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The unselect_delayed_ref_head() at extent-tree.c doesn't really belong in
that file as it's a delayed refs specific detail and therefore should be
at delayed-ref.c. Further its inverse, btrfs_select_ref_head(), is at
delayed-ref.c, so it only makes sense to have it there too.
So move unselect_delayed_ref_head() into delayed-ref.c and rename it to
btrfs_unselect_ref_head() so that its name closely matches its inverse
(btrfs_select_ref_head()).
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of doing it in two steps outside of delayed-ref.c, leaking low
level details such as locking, move the logic entirely to delayed-ref.c
under btrfs_select_ref_head(), reducing code and making things simpler
for the caller.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function only returns 0, meaning it was able to lock the delayed ref
head, or -EAGAIN in case it wasn't able to lock it. So simplify this and
use a boolean return type instead, returning true if it was able to lock
and false otherwise.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The atomic counter 'num_entries' is not used anymore, we increment it
and decrement it but then we don't ever read it to use for any logic.
Its last use was removed with commit 61a56a992fcf ("btrfs: delayed refs
pre-flushing should only run the heads we have"). So remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The fs_info parameter is redundant because it can be extracted from the
transaction given as another parameter. So remove it and use the fs_info
accessible from the transaction.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's better suited at delayed-ref.c since it's about delayed refs and
contains logic to iterate over them (using the red black tree, doing all
the locking, freeing, etc), so move it from disk-io.c, which is pretty
big, into delayed-ref.c, hiding implementation details of how delayed
refs are tracked and managed. This also facilitates the next patches in
the series.
This change moves the code between files but also does the following
simple cleanups:
1) Rename the 'cache' variable to 'bg', since it's a block group
(the 'cache' logic comes from old days where the block group
structure was named 'btrfs_block_group_cache');
2) Move the 'ref' variable declaration to the scope of the inner
while loop, since it's not used outside that loop.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are using the logical address ("bytenr") of an extent as the key for
qgroup records in the dirty extents xarray. This is a problem because the
xarrays use "unsigned long" for keys/indices, meaning that on a 32 bits
platform any extent starting at or beyond 4G is truncated, which is a too
low limitation as virtually everyone is using storage with more than 4G of
space. This means a "bytenr" of 4G gets truncated to 0, and so does 8G and
16G for example, resulting in incorrect qgroup accounting.
Fix this by using sector numbers as keys instead, that is, using keys that
match the logical address right shifted by fs_info->sectorsize_bits, which
is what we do for the fs_info->buffer_radix that tracks extent buffers
(radix trees also use an "unsigned long" type for keys). This also makes
the index space more dense which helps optimize the xarray (as mentioned
at Documentation/core-api/xarray.rst).
Fixes: 3cce39a8ca4e ("btrfs: qgroup: use xarray to track dirty extents in transaction")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use xarray to track dirty extents to reduce the size of the struct
btrfs_qgroup_extent_record from 64 bytes to 40 bytes. The xarray is
more cache line friendly, it also reduces the complexity of insertion
and search code compared to rb tree.
Another change introduced is about error handling. Before this patch,
the result of btrfs_qgroup_trace_extent_nolock() is always a success. In
this patch, because of this function calls the function xa_store() which
has the possibility to fail, so mark qgroup as inconsistent if error
happened and then free preallocated memory. Also we preallocate memory
before spin_lock(), if memory preallcation failed, error handling is the
same the existing code.
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the patch 78c52d9eb6b7 ("btrfs: check for refs on snapshot delete
resume") I added some code to handle file systems that had been
corrupted by a bug that incorrectly skipped updating the drop progress
key while dropping a snapshot. This code would check to see if we had
already deleted our reference for a child block, and skip the deletion
if we had already.
Unfortunately there is a bug, as the check would only check the on-disk
references. I made an incorrect assumption that blocks in an already
deleted snapshot that was having the deletion resume on mount wouldn't
be modified.
If we have 2 pending deleted snapshots that share blocks, we can easily
modify the rules for a block. Take the following example
subvolume a exists, and subvolume b is a snapshot of subvolume a. They
share references to block 1. Block 1 will have 2 full references, one
for subvolume a and one for subvolume b, and it belongs to subvolume a
(btrfs_header_owner(block 1) == subvolume a).
When deleting subvolume a, we will drop our full reference for block 1,
and because we are the owner we will drop our full reference for all of
block 1's children, convert block 1 to FULL BACKREF, and add a shared
reference to all of block 1's children.
Then we will start the snapshot deletion of subvolume b. We look up the
extent info for block 1, which checks delayed refs and tells us that
FULL BACKREF is set, so sets parent to the bytenr of block 1. However
because this is a resumed snapshot deletion, we call into
check_ref_exists(). Because check_ref_exists() only looks at the disk,
it doesn't find the shared backref for the child of block 1, and thus
returns 0 and we skip deleting the reference for the child of block 1
and continue. This orphans the child of block 1.
The fix is to lookup the delayed refs, similar to what we do in
btrfs_lookup_extent_info(). However we only care about whether the
reference exists or not. If we fail to find our reference on disk, go
look up the bytenr in the delayed refs, and if it exists look for an
existing ref in the delayed ref head. If that exists then we know we
can delete the reference safely and carry on. If it doesn't exist we
know we have to skip over this block.
This bug has existed since I introduced this fix, however requires
having multiple deleted snapshots pending when we unmount. We noticed
this in production because our shutdown path stops the container on the
system, which deletes a bunch of subvolumes, and then reboots the box.
This gives us plenty of opportunities to hit this issue. Looking at the
history we've seen this occasionally in production, but we had a big
spike recently thanks to faster machines getting jobs with multiple
subvolumes in the job.
Chris Mason wrote a reproducer which does the following
mount /dev/nvme4n1 /btrfs
btrfs subvol create /btrfs/s1
simoop -E -f 4k -n 200000 -z /btrfs/s1
while(true) ; do
btrfs subvol snap /btrfs/s1 /btrfs/s2
simoop -f 4k -n 200000 -r 10 -z /btrfs/s2
btrfs subvol snap /btrfs/s2 /btrfs/s3
btrfs balance start -dusage=80 /btrfs
btrfs subvol del /btrfs/s2 /btrfs/s3
umount /btrfs
btrfsck /dev/nvme4n1 || exit 1
mount /dev/nvme4n1 /btrfs
done
On the second loop this would fail consistently, with my patch it has
been running for hours and hasn't failed.
I also used dm-log-writes to capture the state of the failure so I could
debug the problem. Using the existing failure case to test my patch
validated that it fixes the problem.
Fixes: 78c52d9eb6b7 ("btrfs: check for refs on snapshot delete resume")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We always allocate a delayed extent op structure when allocating a tree
block (except for log trees), but most of the time we don't need it as
we only need to set the BTRFS_BLOCK_FLAG_FULL_BACKREF if we're dealing
with a relocation tree and we only need to set the key of a tree block
in a btrfs_tree_block_info structure if we are not using skinny metadata
(feature enabled by default since btrfs-progs 3.18 and available as of
kernel 3.10).
In these cases, where we don't need neither to update flags nor to set
the key, we only use the delayed extent op structure to set the tree
block's level. This is a waste of memory and besides that, the memory
allocation can fail and can add additional latency.
Instead of using a delayed extent op structure to store the level of
the tree block, use the delayed ref head to store it. This doesn't
change the size of neither structure and helps us avoid allocating
delayed extent ops structures when using the skinny metadata feature
and there's no relocation going on. This also gets rid of a BUG_ON().
For example, for a fs_mark run, with 5 iterations, 8 threads and 100K
files per iteration, before this patch there were 118109 allocations
of delayed extent op structures and after it there were none.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_migrate_to_delayed_refs_rsv() is no longer used.
Its last use was removed in commit 2f6397e448e6 ("btrfs: don't refill
whole delayed refs block reserve when starting transaction").
So remove the function.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that these two structs are the same, move the btrfs_data_ref and
btrfs_tree_ref up and use these in the btrfs_delayed_ref_node. Then
remove the btrfs_delayed_*_ref structs.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we don't use these helpers anywhere, remove them.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're just extracting the values from btrfs_delayed_ref_node and passing
them through, simply pass the btrfs_delayed_ref_node into
__btrfs_inc_extent_ref and shrink the function arguments.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is how we refer to it in the rest of the extent reference related
code, make it consistent.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two members are shared by both the tree refs and data refs, so
move them into btrfs_delayed_ref_node proper. This allows us to greatly
simplify the comparison code, as the shared refs always only sort on
parent, and the non shared refs always sort first on ref_root, and then
only data refs sort on their specific fields.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We consistently use ->num_bytes everywhere through the delayed ref code,
except in btrfs_ref. Rename btrfs_ref to match all the other code.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We're extracting all of these values from the btrfs_ref we passed in
already, just pass the btrfs_ref through to init_delayed_ref_common and
get the values directly from the struct.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this in both btrfs_tree_ref and btrfs_data_ref, which is just
wasting space and making the code more complicated. Move this into
btrfs_ref proper and update all the call sites to do the assignment in
btrfs_ref.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_ref currently has ->owning_root, and ->ref_root is shared between
the tree ref and data ref, so in order to move that into btrfs_ref
proper I would need to add another root parameter to the initialization
function. This function has too many arguments, and adding another root
will make it easy to make mistakes about which root goes where.
Drop the generic ref init function and statically initialize the
btrfs_ref in every usage. This makes the code easier to read because we
can see what elements we're assigning, and will make the upcoming change
moving the ref_root into the btrfs_ref more clear and less error prone
than adding a new element to the initialization function.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have been embedding btrfs_delayed_ref_node in the
btrfs_delayed_data_ref and btrfs_delayed_tree_ref, and then we have two
sets of cachep's and a variety of handling that is awkward because of
this separation.
Instead union these two members inside of btrfs_delayed_ref_node and
make that the first class object. This allows us to go down to one
cachep for our delayed ref nodes instead of two.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have several different ways we refer to references throughout the
code and it's not consistent and there's a bit of duplication. In order
to clean this up I want to have one structure we use to define reference
information, and one structure we use for the delayed reference
information. Start this process by adding a helper to get from the
btrfs_delayed_data_ref/btrfs_delayed_tree_ref to the
btrfs_delayed_ref_node so that it'll make moving these structures around
simpler.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers are doing an initialization or release work, none of which
is performance critical that it would require a static inline, so move
them to the .c file.
Signed-off-by: David Sterba <dsterba@suse.com>
Do a cleanup in the rest of the headers:
- add forward declarations for types referenced by pointers
- add includes when types need them
This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.
Signed-off-by: David Sterba <dsterba@suse.com>
Space for block group item insertions, necessary after allocating a new
block group, is reserved in the delayed refs block reserve. Currently we
do this by incrementing the transaction handle's delayed_ref_updates
counter and then calling btrfs_update_delayed_refs_rsv(), which will
increase the size of the delayed refs block reserve by an amount that
corresponds to the same amount we use for delayed refs, given by
btrfs_calc_delayed_ref_bytes().
That is an excessive amount because it corresponds to the amount of space
needed to insert one item in a btree (btrfs_calc_insert_metadata_size())
times 2 when the free space tree feature is enabled. All we need is an
amount as given by btrfs_calc_insert_metadata_size(), since we only need to
insert a block group item in the extent tree (or block group tree if this
feature is enabled). By using btrfs_calc_insert_metadata_size() we will
need to reserve 2 times less space when using the free space tree, putting
less pressure on space reservation.
So use helpers to reserve and release space for block group item
insertions that use btrfs_calc_insert_metadata_size() for calculation of
the space.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Space for block group item updates, necessary after allocating or
deallocating an extent from a block group, is reserved in the delayed
refs block reserve. Currently we do this by incrementing the transaction
handle's delayed_ref_updates counter and then calling
btrfs_update_delayed_refs_rsv(), which will increase the size of the
delayed refs block reserve by an amount that corresponds to the same
amount we use for delayed refs, given by btrfs_calc_delayed_ref_bytes().
That is an excessive amount because it corresponds to the amount of space
needed to insert one item in a btree (btrfs_calc_insert_metadata_size())
times 2 when the free space tree feature is enabled. All we need is an
amount as given by btrfs_calc_metadata_size(), since we only need to
update an existing block group item in the extent tree (or block group
tree if this feature is enabled). By using btrfs_calc_metadata_size() we
will need to reserve 4 times less space when using the free space tree
and 2 times less space when not using it, putting less pressure on space
reservation.
So use helpers to reserve and release space for block group item updates
that use btrfs_calc_metadata_size() for calculation of the space.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At the moment that we run delayed refs, we make the final ref-count
based decision on creating/removing extent (and metadata) items.
Therefore, it is exactly the spot to hook up simple quotas.
There are a few important subtleties to the fields we must collect to
accurately track simple quotas, particularly when removing an extent.
When removing a data extent, the ref could be in any tree (due to
reflink, for example) and so we need to recover the owning root id from
the owner ref item. When removing a metadata extent, we know the owning
root from the owner field in the header when we create the delayed ref,
so we can recover it from there.
We must also be careful to handle reservations properly to not leaked
reserved space. The happy path is freeing the reservation when the
simple quota delta runs on a data extent. If that doesn't happen, due to
refs canceling out or some error, the ref head already has the
must_insert_reserved machinery to handle this, so we piggy back on that
and use it to clean up the reserved data.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Simple quotas requires tracking the original creating root of any given
extent. This gets complicated when multiple subvolumes create
overlapping/contradictory refs in the same transaction. For example,
due to modifying or deleting an extent while also snapshotting it.
To resolve this in a general way, take advantage of the fact that we are
essentially already tracking this for handling releasing reservations.
The head ref coalesces the various refs and uses must_insert_reserved to
check if it needs to create an extent/free reservation. Store the ref
that set must_insert_reserved as the owning ref on the head ref.
Note that this can result in writing an extent for the very first time
with an owner different from its only ref, but it will look the same as
if you first created it with the original owning ref, then added the
other ref, then removed the owning ref.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
While data extents require us to store additional inline refs to track
the original owner on free, this information is available implicitly for
metadata. It is found in the owner field of the header of the tree
block. Even if other trees refer to this block and the original ref goes
away, we will not rewrite that header field, so it will reliably give the
original owner.
In addition, there is a relocation case where a new data extent needs to
have an owning root separate from the referring root wired through
delayed refs.
To use it for recording simple quota deltas, we need to wire this root
id through from when we create the delayed ref until we fully process
it. Store it in the generic btrfs_ref struct of the delayed ref.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
commit 113479d5b8eb ("btrfs: rename root fields in delayed refs structs")
changed these from ref_root to owning_root. However, there are many
circumstances where that name is not really accurate and the root on the
ref struct _is_ the referring root. In general, these are not the owning
root, though it does happen in some ref merging cases involving
overwrites during snapshots and similar.
Simple quotas cares quite a bit about tracking the original owner of an
extent through delayed refs, so rename these back to free up the name
for the real owning root (which will live on the generic btrfs_ref and
the head ref)
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when reserving space for deleting the csum items for a data
extent, when adding or updating a delayed ref head, we determine how
many leaves of csum items we can have and then pass that number to the
helper btrfs_calc_delayed_ref_bytes(). This helper is used for calculating
space for all tree modifications we need when running delayed references,
however the amount of space it computes is excessive for deleting csum
items because:
1) It uses btrfs_calc_insert_metadata_size() which is excessive because
we only need to delete csum items from the csum tree, we don't need
to insert any items, so btrfs_calc_metadata_size() is all we need (as
it computes space needed to delete an item);
2) If the free space tree is enabled, it doubles the amount of space,
which is pointless for csum deletion since we don't need to touch the
free space tree or any other tree other than the csum tree.
So improve on this by tracking how many csum deletions we have and using
a new helper to calculate space for csum deletions (just a wrapper around
btrfs_calc_metadata_size() with a comment). This reduces the amount of
space we need to reserve for csum deletions by a factor of 4, and it helps
reduce the number of times we have to block space reservations and have
the reclaim task enter the space flushing algorithm (flush delayed items,
flush delayed refs, etc) in order to satisfy tickets.
For example this results in a total time decrease when unlinking (or
truncating) files with many extents, as we end up having to block on space
metadata reservations less often. Example test:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/test
umount $DEV &> /dev/null
mkfs.btrfs -f $DEV
# Use compression to quickly create files with a lot of extents
# (each with a size of 128K).
mount -o compress=lzo $DEV $MNT
# 100G gives at least 983040 extents with a size of 128K.
xfs_io -f -c "pwrite -S 0xab -b 1M 0 120G" $MNT/foobar
# Flush all delalloc and clear all metadata from memory.
umount $MNT
mount -o compress=lzo $DEV $MNT
start=$(date +%s%N)
rm -f $MNT/foobar
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "rm took $dur milliseconds"
umount $MNT
Before this change rm took: 7504 milliseconds
After this change rm took: 6574 milliseconds (-12.4%)
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_put_delayed_ref(), it's pointless to have a WARN_ON() to check if
the refcount of the delayed ref is zero. Such check is already done by the
refcount_t module and refcount_dec_and_test(), which loudly complains if
we try to decrement a reference count that is currently 0.
The WARN_ON() dates back to the time when used a regular atomic_t type
for the reference counter, before we switched to the refcount_t type.
The main goal of the refcount_t type/module is precisely to catch such
types of bugs and loudly complain if they happen.
This also reduces a bit the module's text size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1612483 167145 16864 1796492 1b698c fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1612371 167073 16864 1796308 1b68d4 fs/btrfs/btrfs.ko
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can reduce two members' size that in turn reduce size of struct
btrfs_ref from 64 to 56 bytes. As the structure is often used as a local
variable several functions reduce their stack usage.
- make enum btrfs_ref_type packed, there are only 4 values
- switch action and its values to a packed enum
Final structure layout:
struct btrfs_ref {
enum btrfs_ref_type type; /* 0 1 */
enum btrfs_delayed_ref_action action; /* 1 1 */
bool skip_qgroup; /* 2 1 */
/* XXX 5 bytes hole, try to pack */
u64 bytenr; /* 8 8 */
u64 len; /* 16 8 */
u64 parent; /* 24 8 */
union {
struct btrfs_data_ref data_ref; /* 32 24 */
struct btrfs_tree_ref tree_ref; /* 32 16 */
}; /* 32 24 */
/* size: 56, cachelines: 1, members: 7 */
/* sum members: 51, holes: 1, sum holes: 5 */
/* last cacheline: 56 bytes */
};
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When starting a transaction, with a non-zero number of items, we reserve
metadata space for that number of items and for delayed refs by doing a
call to btrfs_block_rsv_add(), with the transaction block reserve passed
as the block reserve argument. This reserves metadata space and adds it
to the transaction block reserve. Later we migrate the space we reserved
for delayed references from the transaction block reserve into the delayed
refs block reserve, by calling btrfs_migrate_to_delayed_refs_rsv().
btrfs_migrate_to_delayed_refs_rsv() decrements the number of bytes to
migrate from the source block reserve, and this however may result in an
underflow in case the space added to the transaction block reserve ended
up being used by another task that has not reserved enough space for its
own use - examples are tasks doing reflinks or hole punching because they
end up calling btrfs_replace_file_extents() -> btrfs_drop_extents() and
may need to modify/COW a variable number of leaves/paths, so they keep
trying to use space from the transaction block reserve when they need to
COW an extent buffer, and may end up trying to use more space then they
have reserved (1 unit/path only for removing file extent items).
This can be avoided by simply reserving space first without adding it to
the transaction block reserve, then add the space for delayed refs to the
delayed refs block reserve and finally add the remaining reserved space
to the transaction block reserve. This also makes the code a bit shorter
and simpler. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no point in have several fields defined as 1 bit unsigned int in
struct btrfs_delayed_ref_head, we can instead use a bool type, it makes
the code a bit more readable and it doesn't change the structure size.
So switch them to proper booleans.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The 'in_tree' field is really not needed in struct btrfs_delayed_ref_node,
as we can check whether a reference is in the tree or not simply by
checking its red black tree node member with RB_EMPTY_NODE(), as when we
remove it from the tree we always call RB_CLEAR_NODE(). So remove that
field and use RB_EMPTY_NODE().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The 'is_head' field of struct btrfs_delayed_ref_node is no longer after
commit d278850eff30 ("btrfs: remove delayed_ref_node from ref_head"),
so remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of duplicating the logic for calculating how much space is
required for a given number of delayed references, add an inline helper
to encapsulate that logic and use it everywhere we are calculating the
space required.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have this logic encapsulated in btrfs_should_throttle_delayed_refs()
where we try to estimate if running the current amount of delayed
references we have will take more than half a second, and if so, the
caller btrfs_should_throttle_delayed_refs() should do something to
prevent more and more delayed refs from being accumulated.
This logic was added in commit 0a2b2a844af6 ("Btrfs: throttle delayed
refs better") and then further refined in commit a79b7d4b3e81 ("Btrfs:
async delayed refs"). The idea back then was that the caller of
btrfs_should_throttle_delayed_refs() would release its transaction
handle (by calling btrfs_end_transaction()) when that function returned
true, then btrfs_end_transaction() would trigger an async job to run
delayed references in a workqueue, and later start/join a transaction
again and do more work.
However we don't run delayed references asynchronously anymore, that
was removed in commit db2462a6ad3d ("btrfs: don't run delayed refs in
the end transaction logic"). That makes the logic that tries to estimate
how long we will take to run our current delayed references, at
btrfs_should_throttle_delayed_refs(), pointless as we don't take any
action to run delayed references anymore. We do have other type of
throttling, which consists of checking the size and reserved space of
the delayed and global block reserves, as well as if fluhsing delayed
references for the current transaction was already started, etc - this
is all done by btrfs_should_end_transaction(), and the only user of
btrfs_should_throttle_delayed_refs() does periodically call
btrfs_should_end_transaction().
So remove btrfs_should_throttle_delayed_refs() and the infrastructure
that keeps track of the average time used for running delayed references,
as well as adapting btrfs_truncate_inode_items() to call
btrfs_check_space_for_delayed_refs() instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_should_throttle_delayed_refs() returns 1 or 2 in case the
delayed refs should be throttled, however the only caller (inode eviction
and truncation path) does not care about those two different conditions,
it treats the return value as a boolean. This allows us to remove one of
the conditions in btrfs_should_throttle_delayed_refs() and change its
return value from 'int' to 'bool'. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that none of the functions called by btrfs_merge_delayed_refs() needs
a btrfs_trans_handle, directly pass in a btrfs_fs_info to
btrfs_merge_delayed_refs().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of btrfs_delayed_extent_op::is_data is always false, we can
cascade the change and simplify code that depends on it, removing the
structure member eventually.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that real_root is only used in ref-verify core gate it behind
CONFIG_BTRFS_FS_REF_VERIFY ifdef. This shrinks the size of pending
delayed refs by 8 bytes per ref, of which we can have many at any one
time depending on intensity of the workload. Also change the comment
about the member as it no longer deals with qgroups.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of checking whether qgroup processing for a dealyed ref has to
happen in the core of delayed ref, simply pull the check at init time of
respective delayed ref structures. This eliminates the final use of
real_root in delayed-ref core paving the way to making this member
optional.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
