mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-28 16:56:26 +00:00
master
420 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
5c00ff742b |
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
||
|
Linus Torvalds
|
bf9aa14fc5 |
A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
||
|
Andrew Morton
|
2ec0859039 |
Merge branch 'mm-hotfixes-stable' into mm-stable
Pick up
|
||
|
SeongJae Park
|
73da523802 |
mm/damon/tests/dbgfs-kunit: fix the header double inclusion guarding ifdef comment
Closing part of double inclusion guarding macro for dbgfs-kunit.h was
copy-pasted from somewhere (maybe before the initial mainline merge of
DAMON), and not properly updated. Fix it.
Link: https://lkml.kernel.org/r/20241028233058.283381-7-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
12d021659c |
mm/damon/Kconfig: update DBGFS_KUNIT prompt copy for SYSFS_KUNIT
CONFIG_DAMON_SYSFS_KUNIT_TEST prompt is copied from that for DAMON debugfs
interface kunit tests, and not correctly updated. Fix it.
Link: https://lkml.kernel.org/r/20241028233058.283381-6-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
4401e9d10a |
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
damon_feed_loop_next_input() is inefficient and fragile to overflows.
Specifically, 'score_goal_diff_bp' calculation can overflow when 'score'
is high. The calculation is actually unnecessary at all because 'goal' is
a constant of value 10,000. Calculation of 'compensation' is again
fragile to overflow. Final calculation of return value for under-achiving
case is again fragile to overflow when the current score is
under-achieving the target.
Add two corner cases handling at the beginning of the function to make the
body easier to read, and rewrite the body of the function to avoid
overflows and the unnecessary bp value calcuation.
Link: https://lkml.kernel.org/r/20241031161203.47751-1-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
8e7bde615f |
mm/damon/core: handle zero schemes apply interval
DAMON's logics to determine if this is the time to apply damos schemes
assumes next_apply_sis is always set larger than current
passed_sample_intervals. And therefore assume continuously incrementing
passed_sample_intervals will make it reaches to the next_apply_sis in
future. The logic hence does apply the scheme and update next_apply_sis
only if passed_sample_intervals is same to next_apply_sis.
If Schemes apply interval is set as zero, however, next_apply_sis is set
same to current passed_sample_intervals, respectively. And
passed_sample_intervals is incremented before doing the next_apply_sis
check. Hence, next_apply_sis becomes larger than next_apply_sis, and the
logic says it is not the time to apply schemes and update next_apply_sis.
In other words, DAMON stops applying schemes until passed_sample_intervals
overflows.
Based on the documents and the common sense, a reasonable behavior for
such inputs would be applying the schemes for every sampling interval.
Handle the case by removing the assumption.
Link: https://lkml.kernel.org/r/20241031183757.49610-3-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
3488af0970 |
mm/damon/core: handle zero {aggregation,ops_update} intervals
Patch series "mm/damon/core: fix handling of zero non-sampling intervals".
DAMON's internal intervals accounting logic is not correctly handling
non-sampling intervals of zero values for a wrong assumption. This could
cause unexpected monitoring behavior, and even result in infinite hang of
DAMON sysfs interface user threads in case of zero aggregation interval.
Fix those by updating the intervals accounting logic. For details of the
root case and solutions, please refer to commit messages of fixes.
This patch (of 2):
DAMON's logics to determine if this is the time to do aggregation and ops
update assumes next_{aggregation,ops_update}_sis are always set larger
than current passed_sample_intervals. And therefore it further assumes
continuously incrementing passed_sample_intervals every sampling interval
will make it reaches to the next_{aggregation,ops_update}_sis in future.
The logic therefore make the action and update
next_{aggregation,ops_updaste}_sis only if passed_sample_intervals is same
to the counts, respectively.
If Aggregation interval or Ops update interval are zero, however,
next_aggregation_sis or next_ops_update_sis are set same to current
passed_sample_intervals, respectively. And passed_sample_intervals is
incremented before doing the next_{aggregation,ops_update}_sis check.
Hence, passed_sample_intervals becomes larger than
next_{aggregation,ops_update}_sis, and the logic says it is not the time
to do the action and update next_{aggregation,ops_update}_sis forever,
until an overflow happens. In other words, DAMON stops doing aggregations
or ops updates effectively forever, and users cannot get monitoring
results.
Based on the documents and the common sense, a reasonable behavior for
such inputs is doing an aggregation and an ops update for every sampling
interval. Handle the case by removing the assumption.
Note that this could incur particular real issue for DAMON sysfs interface
users, in case of zero Aggregation interval. When user starts DAMON with
zero Aggregation interval and asks online DAMON parameter tuning via DAMON
sysfs interface, the request is handled by the aggregation callback.
Until the callback finishes the work, the user who requested the online
tuning just waits. Hence, the user will be stuck until the
passed_sample_intervals overflows.
Link: https://lkml.kernel.org/r/20241031183757.49610-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241031183757.49610-2-sj@kernel.org
Fixes:
|
||
|
Zheng Yejian
|
477327e106 |
mm/damon/vaddr: add 'nr_piece == 1' check in damon_va_evenly_split_region()
As discussed in [1], damon_va_evenly_split_region() is called to size-evenly split a region into 'nr_pieces' small regions, when nr_pieces == 1, no actual split is required. Check that case for better code readability and add a simple kunit testcase. [1] https://lore.kernel.org/all/20241021163316.12443-1-sj@kernel.org/ Link: https://lkml.kernel.org/r/20241022083927.3592237-3-zhengyejian@huaweicloud.com Signed-off-by: Zheng Yejian <zhengyejian@huaweicloud.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Ye Weihua <yeweihua4@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Zheng Yejian
|
f3c7a1ede4 |
mm/damon/vaddr: fix issue in damon_va_evenly_split_region()
Patch series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()". v2.
According to the logic of damon_va_evenly_split_region(), currently
following split case would not meet the expectation:
Suppose DAMON_MIN_REGION=0x1000,
Case: Split [0x0, 0x3000) into 2 pieces, then the result would be
acutually 3 regions:
[0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000)
but NOT the expected 2 regions:
[0x0, 0x1000), [0x1000, 0x3000) !!!
The root cause is that when calculating size of each split piece in
damon_va_evenly_split_region():
`sz_piece = ALIGN_DOWN(sz_orig / nr_pieces, DAMON_MIN_REGION);`
both the dividing and the ALIGN_DOWN may cause loss of precision, then
each time split one piece of size 'sz_piece' from origin 'start' to 'end'
would cause more pieces are split out than expected!!!
To fix it, count for each piece split and make sure no more than
'nr_pieces'. In addition, add above case into damon_test_split_evenly().
And add 'nr_piece == 1' check in damon_va_evenly_split_region() for better
code readability and add a corresponding kunit testcase.
This patch (of 2):
According to the logic of damon_va_evenly_split_region(), currently
following split case would not meet the expectation:
Suppose DAMON_MIN_REGION=0x1000,
Case: Split [0x0, 0x3000) into 2 pieces, then the result would be
acutually 3 regions:
[0x0, 0x1000), [0x1000, 0x2000), [0x2000, 0x3000)
but NOT the expected 2 regions:
[0x0, 0x1000), [0x1000, 0x3000) !!!
The root cause is that when calculating size of each split piece in
damon_va_evenly_split_region():
`sz_piece = ALIGN_DOWN(sz_orig / nr_pieces, DAMON_MIN_REGION);`
both the dividing and the ALIGN_DOWN may cause loss of precision,
then each time split one piece of size 'sz_piece' from origin 'start' to
'end' would cause more pieces are split out than expected!!!
To fix it, count for each piece split and make sure no more than
'nr_pieces'. In addition, add above case into damon_test_split_evenly().
After this patch, damon-operations test passed:
# ./tools/testing/kunit/kunit.py run damon-operations
[...]
============== damon-operations (6 subtests) ===============
[PASSED] damon_test_three_regions_in_vmas
[PASSED] damon_test_apply_three_regions1
[PASSED] damon_test_apply_three_regions2
[PASSED] damon_test_apply_three_regions3
[PASSED] damon_test_apply_three_regions4
[PASSED] damon_test_split_evenly
================ [PASSED] damon-operations =================
Link: https://lkml.kernel.org/r/20241022083927.3592237-1-zhengyejian@huaweicloud.com
Link: https://lkml.kernel.org/r/20241022083927.3592237-2-zhengyejian@huaweicloud.com
Fixes:
|
||
|
James Houghton
|
628e1b8c47 |
mm: add missing mmu_notifier_clear_young for !MMU_NOTIFIER
Remove the now unnecessary ifdef in mm/damon/vaddr.c as well. Link: https://lkml.kernel.org/r/20241021160212.9935-1-jthoughton@google.com Signed-off-by: James Houghton <jthoughton@google.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: SeongJae Park <sj@kernel.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Leo Stone
|
ba7196e566 |
mm/damon: fix sparse warning for zero initializer
sparse warns about zero initializing an array with {0,}, change it to
the equivalent {0}.
Fixes the sparse warning:
mm/damon/tests/vaddr-kunit.h:69:47: warning: missing braces around initializer
Link: https://lkml.kernel.org/r/xriwklcwjpwcz7eiavo6f7envdar4jychhsk6sfkj5klaznb6b@j6vrvr2sxjht
Fixes:
|
||
|
Jinjie Ruan
|
2d6a1c8356 |
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not
freed in damon_sysfs_test_add_targets(), which cause the following memory
leak, free it to fix it.
unreferenced object 0xffffff80c2a8db80 (size 96):
comm "kunit_try_catch", pid 187, jiffies 4294894363
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<0000000001e3714d>] kmemleak_alloc+0x34/0x40
[<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738
[<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac
[<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000adf936cf>] kthread+0x2e8/0x374
[<0000000041bb1628>] ret_from_fork+0x10/0x20
Link: https://lkml.kernel.org/r/20241010125323.3127187-1-ruanjinjie@huawei.com
Fixes:
|
||
|
Anna-Maria Behnsen
|
ef0245582e |
mm/damon/core: Use generic upper bound recommondation for usleep_range()
The upper bound for usleep_range_idle() was taken from the outdated documentation. As a recommondation for the upper bound of usleep_range() depends on HZ configuration it is not possible to hard code it. Use the define "USLEEP_RANGE_UPPER_BOUND" instead. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: SeongJae Park <sj@kernel.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-8-dc8b907cb62f@linutronix.de |
||
|
Anna-Maria Behnsen
|
102f085d84 |
timers: Rename usleep_idle_range() to usleep_range_idle()
usleep_idle_range() is a variant of usleep_range(). Both are using usleep_range_state() as a base. To be able to find all the related functions in one go, rename it usleep_idle_range() to usleep_range_idle(). No functional change. Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: SeongJae Park <sj@kernel.org> Link: https://lore.kernel.org/all/20241014-devel-anna-maria-b4-timers-flseep-v3-4-dc8b907cb62f@linutronix.de |
||
|
Diederik de Haas
|
6901cf55de |
mm/damon/Kconfig: update DAMON doc URL
The old URL doesn't really work anymore and as the documentation has been integrated in the main kernel documentation site, change the URL to point to that. Link: https://lkml.kernel.org/r/20240924082331.11499-1-didi.debian@cknow.org Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
||
|
SeongJae Park
|
25e8acbcf1 |
mm/damon/tests/core-kunit: skip damon_test_nr_accesses_to_accesses_bp() if aggr_interval is zero
The aggregation interval of test purpose damon_attrs for
damon_test_nr_accesses_to_accesses_bp() becomes zero on 32 bit
architecture, since size of int and long types are same. As a result,
damon_nr_accesses_to_accesses_bp() call with the test data triggers
divide-by-zero exception. damon_nr_accesses_to_accesses_bp() shouldn't
be called with such data, and the non-test code avoids that by checking
the case on damon_update_monitoring_results(). Skip the test code in
the case, and add an explicit caution of the case on the comment for the
test target function.
Link: https://lkml.kernel.org/r/20240905162423.74053-1-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
f0679f9e6d |
mm/damon/tests/vaddr-kunit: init maple tree without MT_FLAGS_LOCK_EXTERN
damon_test_three_regions_in_vmas() initializes a maple tree with
MM_MT_FLAGS. The flags contains MT_FLAGS_LOCK_EXTERN, which means mt_lock
of the maple tree will not be used. And therefore the maple tree
initialization code skips initialization of the mt_lock. However,
__link_vmas(), which adds vmas for test to the maple tree, uses the
mt_lock. In other words, the uninitialized spinlock is used. The problem
becomes clear when spinlock debugging is turned on, since it reports
spinlock bad magic bug.
Fix the issue by excluding MT_FLAGS_LOCK_EXTERN from the maple tree
initialization flags. Note that we don't use empty flags to make it
further similar to the usage of mm maple tree, and to be prepared for
possible future changes, as suggested by Liam.
Link: https://lkml.kernel.org/r/20240904172931.1284-1-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
2986846437 |
Revert "mm/damon/lru_sort: adjust local variable to dynamic allocation"
This reverts commit 0742cadf5e4c ("mm/damon/lru_sort: adjust local
variable to dynamic allocation").
The commit was introduced to avoid unnecessary usage of stack memory for
per-scheme region priorities histogram buffer. The fix is nice, but the
point of the fix looks not very clear if the commit message is not read
together. That's mainly because the buffer is a private field, which
means it is hidden from the DAMON API users. That's not the fault of the
fix but the underlying data structure.
Now the per-scheme histogram buffer is gone, so the problem that the
commit was fixing is also removed. The use of kmemdup() has no more point
but just making the code bit difficult to understand. Revert the fix.
Link: https://lkml.kernel.org/r/20240826042323.87025-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
SeongJae Park
|
304b95847f |
mm/damon/core: replace per-quota regions priority histogram buffer usage with per-context one
Replace the usage of per-quota region priorities histogram buffer with the per-context one. After this change, the per-quota histogram is not used by anyone, and hence it is ready to be removed. Link: https://lkml.kernel.org/r/20240826042323.87025-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
b7315fbb64 |
mm/damon/core: introduce per-context region priorities histogram buffer
Patch series "replace per-quota region priorities histogram buffer with
per-context one".
Each DAMOS quota (struct damos_quota) maintains a histogram for total
regions size per its prioritization score. DAMOS calcultes minimum
prioritization score of regions that are ok to apply the DAMOS action to
while respecting the quota. The histogram is constructed only for the
calculation of the minimum score in damos_adjust_quota() for each quota
which called by kdamond_fn().
Hence, there is no real reason to have per-quota histogram. Only
per-kdamond histogram is needed, since parallel kdamonds could have races
otherwise. The current implementation is only wasting the memory, and can
easily cause unintended stack usage[1].
So, introducing a per-kdamond histogram and replacing the per-quota one
with it would be the right solution for the issue. However, supporting
multiple DAMON contexts per kdamond is still an ongoing work[2] without a
clear estimated time of arrival. Meanwhile, per-context histogram could
be an effective and straightforward solution having no blocker. Let's fix
the problem first in the way.
This patch (of 4):
Introduce per-context buffer for region priority scores-total size
histogram. Same to the per-quota one (->histogram of struct damos_quota),
the new buffer is hidden from DAMON API users by being defined as a
private field of DAMON context structure. It is dynamically allocated and
de-allocated at the beginning and ending of the execution of the kdamond
by kdamond_fn() itself.
[1] commit 0742cadf5e4c ("mm/damon/lru_sort: adjust local variable to dynamic allocation")
[2] https://lore.kernel.org/20240531122320.909060-1-yorha.op@gmail.com
Link: https://lkml.kernel.org/r/20240826042323.87025-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240826042323.87025-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Liam R. Howlett
|
fb497d6db7 |
mm/damon/vaddr: protect vma traversal in __damon_va_thre_regions() with rcu read lock
Traversing VMAs of a given maple tree should be protected by rcu read
lock. However, __damon_va_three_regions() is not doing the protection.
Hold the lock.
Link: https://lkml.kernel.org/r/20240905001204.1481-1-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
f66ac836d4 |
mm/damon/tests: add .kunitconfig file for DAMON kunit tests
'--kunitconfig' option of 'kunit.py run' supports '.kunitconfig' file name convention. Add the file for DAMON kunit tests for more convenient kunit run. Link: https://lkml.kernel.org/r/20240827030336.7930-10-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
9bfbaa5e44 |
mm/damon: move kunit tests to tests/ subdirectory with _kunit suffix
There was a discussion about better places for kunit test code[1] and test file name suffix[2]. Folowwing the conclusion, move kunit tests for DAMON to mm/damon/tests/ subdirectory and rename those. [1] https://lore.kernel.org/CABVgOS=pUdWb6NDHszuwb1HYws4a1-b1UmN=i8U_ED7HbDT0mg@mail.gmail.com [2] https://lore.kernel.org/CABVgOSmKwPq7JEpHfS6sbOwsR0B-DBDk_JP-ZD9s9ZizvpUjbQ@mail.gmail.com Link: https://lkml.kernel.org/r/20240827030336.7930-9-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
61879eed1f |
mm/damon/dbgfs-test: skip dbgfs_set_init_regions() test if PADDR is not registered
The test depends on registration of DAMON_OPS_PADDR. It would be
registered only when CONFIG_DAMON_PADDR is set. DAMON core kunit tests do
fake ops registration for such case. However, the functions for such fake
ops registration is not available to DAMON debugfs interface. Just skip
the test in the case.
Link: https://lkml.kernel.org/r/20240827030336.7930-8-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
8e34bac5a2 |
mm/damon/dbgfs-test: skip dbgfs_set_targets() test if PADDR is not registered
The test depends on registration of DAMON_OPS_PADDR. It would be
registered only when CONFIG_DAMON_PADDR is set. DAMON core kunit tests do
fake ops registration for such case. However, the functions for such fake
ops registration is not available to DAMON debugfs interface. Just skip
the test in the case.
Link: https://lkml.kernel.org/r/20240827030336.7930-7-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
e43772dcdf |
mm/damon/core-test: fix damon_test_ops_registration() for DAMON_VADDR unset case
DAMON core kunit test can be executed without CONFIG_DAMON_VADDR. In the
case, vaddr DAMON ops is not registered. Meanwhile, ops registration
kunit test assumes the vaddr ops is registered. Check and handle the case
by registrering fake vaddr ops inside the test code.
Link: https://lkml.kernel.org/r/20240827030336.7930-6-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
9fcce7e7be |
mm/damon/core-test: test only vaddr case on ops registration test
DAMON ops registration kunit test tests both vaddr and paddr use cases in parts of the whole test cases. Basically testing only one ops use case is enough. Do the test with only vaddr use case. Link: https://lkml.kernel.org/r/20240827030336.7930-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Gow <davidgow@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Peng Hao
|
c39542732a |
mm/damon/lru_sort: adjust local variable to dynamic allocation
When KASAN is enabled and built with clang:
mm/damon/lru_sort.c:199:12: error: stack frame size (2328) exceeds
limit (2048) in 'damon_lru_sort_apply_parameters' [-Werror,-Wframe-larger-than]
static int damon_lru_sort_apply_parameters(void)
^
1 error generated.
This is because damon_lru_sort_quota contains a large array, and
assigning this variable to a local variable causes a large amount of
stack space to be occupied.
So adjust local variable to dynamic allocation.
Link: https://lkml.kernel.org/r/20240723035513.20153-1-flyingpeng@tencent.com
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Christophe Leroy
|
e6c0c03245 |
mm: provide mm_struct and address to huge_ptep_get()
On powerpc 8xx huge_ptep_get() will need to know whether the given ptep is a PTE entry or a PMD entry. This cannot be known with the PMD entry itself because there is no easy way to know it from the content of the entry. So huge_ptep_get() will need to know either the size of the page or get the pmd. In order to be consistent with huge_ptep_get_and_clear(), give mm and address to huge_ptep_get(). Link: https://lkml.kernel.org/r/cc00c70dd384298796a4e1b25d6c4eb306d3af85.1719928057.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Andrew Morton
|
8ef6fd0e9e |
Merge branch 'mm-hotfixes-stable' into mm-stable to pick up "mm: fix
crashes from deferred split racing folio migration", needed by "mm: migrate: split folio_migrate_mapping()". |
||
|
SeongJae Park
|
64548bc534 |
mm/damon/paddr: initialize nr_succeeded in __damon_pa_migrate_folio_list()
The variable is supposed to be set via later migrate_pages() call. However, the function does not do that when CONFIG_MIGRATION is unset. Initialize the variable to zero. Link: https://lkml.kernel.org/r/20240701165332.47495-1-sj@kernel.org Fixes: 5311c0a2eee3 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion") Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202406251102.GE07hqfQ-lkp@intel.com/ Cc: Honggyu Kim <honggyu.kim@sk.com> Cc: Hyeongtak Ji <hyeongtak.ji@sk.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
310d6c15e9 |
mm/damon/core: merge regions aggressively when max_nr_regions is unmet
DAMON keeps the number of regions under max_nr_regions by skipping regions
split operations when doing so can make the number higher than the limit.
It works well for preventing violation of the limit. But, if somehow the
violation happens, it cannot recovery well depending on the situation. In
detail, if the real number of regions having different access pattern is
higher than the limit, the mechanism cannot reduce the number below the
limit. In such a case, the system could suffer from high monitoring
overhead of DAMON.
The violation can actually happen. For an example, the user could reduce
max_nr_regions while DAMON is running, to be lower than the current number
of regions. Fix the problem by repeating the merge operations with
increasing aggressiveness in kdamond_merge_regions() for the case, until
the limit is met.
[sj@kernel.org: increase regions merge aggressiveness while respecting min_nr_regions]
Link: https://lkml.kernel.org/r/20240626164753.46270-1-sj@kernel.org
[sj@kernel.org: ensure max threshold attempt for max_nr_regions violation]
Link: https://lkml.kernel.org/r/20240627163153.75969-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240624175814.89611-1-sj@kernel.org
Fixes:
|
||
|
SeongJae Park
|
d4fbcf0b56 |
mm/damon/lru_sort: remove unnecessary online tuning handling code
DAMON_LRU_SORT contains code for handling of online DAMON parameters update edge cases. It is no more necessary since damon_commit_ctx() takes care of the cases. Remove the unnecessary code. Link: https://lkml.kernel.org/r/20240618181809.82078-13-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
a309694364 |
mm/damon/lru_sort: use damon_commit_ctx()
DAMON_LRU_SORT manually manipulates the DAMON context struct for online parameters update. Since the struct contains not only input parameters but also internal status and operation results, it is not that simple. Indeed, we found and fixed a few bugs in the code. Now DAMON core layer provides a function for the usage, namely damon_commit_ctx(). Replace the manual manipulation logic with the function. The core layer function could have its own bugs, but this change removes a source of bugs. Link: https://lkml.kernel.org/r/20240618181809.82078-12-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
b94322b10b |
mm/damon/reclaim: remove unnecessary code for online tuning
DAMON_RECLAIM contains code for handling of online DAMON parameters update edge cases. It is no more necessary since damon_commit_ctx() takes care of the cases. Remove the unnecessary code. Link: https://lkml.kernel.org/r/20240618181809.82078-11-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
11ddcfc257 |
mm/damon/reclaim: use damon_commit_ctx()
DAMON_RECLAIM manually manipulates the DAMON context struct for online parameters update. Since the struct contains not only input parameters but also internal status and operation results, it is not that simple. Indeed, we found and fixed a few bugs in the code. Now DAMON core layer provides a function for the usage, namely damon_commit_ctx(). Replace the manual manipulation logic with the function. The core layer function could have its own bugs, but this change removes a source of bugs. Link: https://lkml.kernel.org/r/20240618181809.82078-10-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
a83364a216 |
mm/damon/sysfs-schemes: rename *_set_{schemes,scheme_filters,quota_score,schemes}()
The functions were for updating DAMON structs that may or may not be partially populated. Hence it was not for only adding items, but also removing unnecessary items and updating items in-place. A previous commit has changed the functions to assume the structs are not partially populated, and do only adding items. Make the names better explain the behavior. Link: https://lkml.kernel.org/r/20240618181809.82078-9-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
0fddd60476 |
mm/damon/sysfs-schemes: remove unnecessary online tuning handling code
damon/sysfs-schemes.c contains code for handling of online DAMON parameters update edge cases. The logics are no more necessary since damon_commit_ctx() and damon_commit_quota_goals() takes care of the cases. Remove the unnecessary code. Link: https://lkml.kernel.org/r/20240618181809.82078-8-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
2caef83db9 |
mm/damon/sysfs: rename damon_sysfs_set_targets() to ...add_targets()
The function was for updating DAMON structs that may or may not be partially populated. Hence it was not for only adding items, but also removing unnecessary items and updating items in-place. A previous commit has changed the function to assume the structs are not partially populated, and do only adding items. Make the function name better explain the behavior. Link: https://lkml.kernel.org/r/20240618181809.82078-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
d96727a251 |
mm/damon/sysfs: remove unnecessary online tuning handling code
damon/sysfs.c contains code for handling of online DAMON parameters update edge cases. It is no more necessary since damon_commit_ctx() takes care of the cases. Remove the unnecessary code. Link: https://lkml.kernel.org/r/20240618181809.82078-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
77ed1eb642 |
mm/damon/sysfs-schemes: use damos_commit_quota_goals()
DAMON_SYSFS manually manipulates the DAMOS quota structs for online quotal goals parameter update. Since the struct contains not only input parameters but also internal status and operation results, it is not that simple. Now DAMON core layer provides a function for the usage, namely damon_commit_quota_goals(). Replace the manual manipulation logic with the function. The core layer function could have its own bugs, but this change removes a source of bugs. Link: https://lkml.kernel.org/r/20240618181809.82078-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
83dc7bbaec |
mm/damon/sysfs: use damon_commit_ctx()
DAMON_SYSFS manually manipulates DAMON context structs for online parameters update. Since the struct contains not only input parameters but also internal status and operation results, it is not that simple. Indeed, we found and fixed a few bugs in the code. Now DAMON core layer provides a function for the usage, namely damon_commit_ctx(). Replace the manual manipulation logic with the function. The core layer function could have its own bugs, but this change removes a source of bugs. Link: https://lkml.kernel.org/r/20240618181809.82078-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
9cb3d0b9df |
mm/damon/core: implement DAMON context commit function
Implement functions for supporting online DAMON context level parameters update. The function receives two DAMON context structs. One is the struct that currently being used by a kdamond and therefore to be updated. The other one contains the parameters to be applied to the first one. The function applies the new parameters to the destination struct while keeping/updating the internal status and operation results. The function should be called from DAMON context-update-safe place, like DAMON callbacks. Link: https://lkml.kernel.org/r/20240618181809.82078-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
3ad1dce6c3 |
mm/damon/core: implement DAMOS quota goals online commit function
Patch series "mm/damon: introduce DAMON parameters online commit function". DAMON context struct (damon_ctx) contains user requests (parameters), internal status, and operation results. For flexible usages, DAMON API users are encouraged to manually manipulate the struct. That works well for simple use cases. However, it has turned out that it is not that simple at least for online parameters udpate. It is easy to forget properly maintaining internal status and operation results. Also, such manual manipulation for online tuning is implemented multiple times on DAMON API users including DAMON sysfs interface, DAMON_RECLAIM and DAMON_LRU_SORT. As a result, we have multiple sources of bugs for same problem. Actually we found and fixed a few bugs from online parameter updating of DAMON API users. Implement a function for online DAMON parameters update in core layer, and replace DAMON API users' manual manipulation code for the use case. The core layer function could still have bugs, but this change reduces the source of bugs for the problem to one place. This patch (of 12): Implement functions for supporting online DAMOS quota goals parameters update. The function receives two DAMOS quota structs. One is the struct that currently being used by a kdamond and therefore to be updated. The other one contains the parameters to be applied to the first one. The function applies the new parameters to the destination struct while keeping/updating the internal status. The function should be called from parameters-update safe place, like DAMON callbacks. Link: https://lkml.kernel.org/r/20240618181809.82078-1-sj@kernel.org Link: https://lkml.kernel.org/r/20240618181809.82078-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Hyeongtak Ji
|
b696722d78 |
mm/damon/paddr: introduce DAMOS_MIGRATE_HOT action for promotion
This patch introduces DAMOS_MIGRATE_HOT action, which is similar to DAMOS_MIGRATE_COLD, but proritizes hot pages. It migrates pages inside the given region to the 'target_nid' NUMA node in the sysfs. Here is one of the example usage of this 'migrate_hot' action. $ cd /sys/kernel/mm/damon/admin/kdamonds/<N> $ cat contexts/<N>/schemes/<N>/action migrate_hot $ echo 0 > contexts/<N>/schemes/<N>/target_nid $ echo commit > state $ numactl -p 2 ./hot_cold 500M 600M & $ numastat -c -p hot_cold Per-node process memory usage (in MBs) PID Node 0 Node 1 Node 2 Total -------------- ------ ------ ------ ----- 701 (hot_cold) 501 0 601 1101 Link: https://lkml.kernel.org/r/20240614030010.751-7-honggyu.kim@sk.com Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com> Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Gregory Price <gregory.price@memverge.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Honggyu Kim
|
b51820ebea |
mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion
This patch introduces DAMOS_MIGRATE_COLD action, which is similar to DAMOS_PAGEOUT, but migrate folios to the given 'target_nid' in the sysfs instead of swapping them out. The 'target_nid' sysfs knob informs the migration target node ID. Here is one of the example usage of this 'migrate_cold' action. $ cd /sys/kernel/mm/damon/admin/kdamonds/<N> $ cat contexts/<N>/schemes/<N>/action migrate_cold $ echo 2 > contexts/<N>/schemes/<N>/target_nid $ echo commit > state $ numactl -p 0 ./hot_cold 500M 600M & $ numastat -c -p hot_cold Per-node process memory usage (in MBs) PID Node 0 Node 1 Node 2 Total -------------- ------ ------ ------ ----- 701 (hot_cold) 501 0 601 1101 Since there are some common routines with pageout, many functions have similar logics between pageout and migrate cold. damon_pa_migrate_folio_list() is a minimized version of shrink_folio_list(). Link: https://lkml.kernel.org/r/20240614030010.751-6-honggyu.kim@sk.com Signed-off-by: Honggyu Kim <honggyu.kim@sk.com> Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Gregory Price <gregory.price@memverge.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rakie Kim <rakie.kim@sk.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Hyeongtak Ji
|
e36287c6e1 |
mm/damon/sysfs-schemes: add target_nid on sysfs-schemes
This patch adds target_nid under
/sys/kernel/mm/damon/admin/kdamonds/<N>/contexts/<N>/schemes/<N>/
The 'target_nid' can be used as the destination node for DAMOS actions
such as DAMOS_MIGRATE_{HOT,COLD} in the follow up patches.
[sj@kernel.org: document target_nid file]
Link: https://lkml.kernel.org/r/20240618213630.84846-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20240614030010.751-4-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Alex Rusuf
|
3b15f9d1c2 |
mm/damon/core: fix return value from damos_wmark_metric_value
damos_wmark_metric_value's return value is 'unsigned long', so returning
-EINVAL as 'unsigned long' may turn out to be very different from the
expected one (using 2's complement) and treat as usual matric's value.
So, fix that, checking if returned value is not 0.
Link: https://lkml.kernel.org/r/20240506180238.53842-1-sj@kernel.org
Fixes:
|