The helper __lookup_addr() can be used in mptcp_pm_nl_get_local_id()
and mptcp_pm_nl_is_backup() to simplify the code, and avoid code
duplication.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241115-net-next-mptcp-pm-lockless-dump-v1-2-f4a1bcb4ca2c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To return an endpoint to the userspace via Netlink, and to dump all of
them, the endpoint list was iterated while holding the pernet->lock, but
only to read the content of the list.
In these cases, the spin locks can be replaced by RCU read ones, and use
the _rcu variants to iterate over the entries list in a lockless way.
Note that the __lookup_addr_by_id() helper has been modified to use the
_rcu variants of list_for_each_entry(), but with an extra conditions, so
it can be called either while the RCU read lock is held, or when the
associated pernet->lock is held.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241115-net-next-mptcp-pm-lockless-dump-v1-1-f4a1bcb4ca2c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When traversing userspace_pm_local_addr_list and deleting an entry from
it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held.
This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id()
and releases it after list_move() in mptcp_pm_nl_remove_doit().
Fixes: d9a4594eda ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In 'mptcp_reset_tout_timer', promote 'probe_timestamp' to unsigned long
to avoid possible integer overflow. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Link: https://patch.msgid.link/20241107103657.1560536-1-d.kandybka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Additional active subflows - i.e. created by the in kernel path
manager - are included into the subflow list before starting the
3whs.
A racing recvmsg() spooling data received on an already established
subflow would unconditionally call tcp_cleanup_rbuf() on all the
current subflows, potentially hitting a divide by zero error on
the newly created ones.
Explicitly check that the subflow is in a suitable state before
invoking tcp_cleanup_rbuf().
Fixes: c76c695656 ("mptcp: call tcp_cleanup_rbuf on subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable has already been assigned in the subflow_create_ctx(),
So we don't need to reassign this variable in the subflow_ulp_clone().
Signed-off-by: MoYuanhao <moyuanhao3676@163.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241106071035.2591-1-moyuanhao3676@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_get_available_schedulers() needs to iterate over the schedulers'
list only to read the names: it doesn't modify anything there.
In this case, it is enough to hold the RCU read lock, no need to combine
this with the associated spin lock as it was done since its introduction
in commit 73c900aa36 ("mptcp: add net.mptcp.available_schedulers").
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-next-mptcp-sched-unneeded-lock-v2-1-2ccc1e0c750c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The local address entries on userspace_pm_local_addr_list are allocated
by sock_kmalloc().
It's then required to use sock_kfree_s() instead of kfree() to free
these entries in order to adjust the allocated size on the sk side.
Fixes: 24430f8bf5 ("mptcp: add address into userspace pm list")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-2-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the switch to YNL, the command to list all endpoints has been
accidentally restricted to users with admin permissions.
It looks like there are no reasons to have this restriction which makes
it harder for a user to quickly check if the endpoint list has been
correctly populated by an automated tool. Best to go back to the
previous behaviour then.
mptcp_pm_gen.c has been modified using ynl-gen-c.py:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
The header file doesn't need to be regenerated.
Fixes: 1d0507f468 ("net: mptcp: convert netlink from small_ops to ops")
Cc: stable@vger.kernel.org
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241104-net-mptcp-misc-6-12-v1-1-c13f2ff1656f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC8684 suggests use of "Middlebox interference (code 0x06)" in case of
fully established subflow that carries data at TCP level with no DSS
sub-option.
This is generally the case when mpext is NULL or mpext->use_map is 0:
use a dedicated value of 'mapping_status' and use it before closing the
socket in subflow_check_data_avail().
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/518
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-4-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP path manager event handler mptcp_pm_connection_closed
interface has been added in the commit 1b1c7a0ef7 ("mptcp: Add path
manager interface") but it was an empty function from then on.
With such name, it sounds good to invoke mptcp_event with the
MPTCP_EVENT_CLOSED event type from it. It also removes a bit of
duplicated code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-3-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We introduce the same handling for potential data races with the
'fully_established' flag in subflow as previously done for
msk->fully_established.
Additionally, we make a crucial change: convert the subflow's
'fully_established' from 'bit_field' to 'bool' type. This is
necessary because methods for avoiding data races don't work well
with 'bit_field'. Specifically, the 'READ_ONCE' needs to know
the size of the variable being accessed, which is not supported in
'bit_field'. Also, 'test_bit' expect the address of 'bit_field'.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/516
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-2-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the subflow is considered as "staled", it is better to avoid it to
send an ACK carrying an ADD_ADDR or RM_ADDR. Another subflow, if any,
will then be selected.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241021-net-next-mptcp-misc-6-13-v1-1-1ef02746504a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change ynl-gen-c.py to use NLA_BE16 and NLA_BE32 types to represent
big-endian u16 and u32 ynl types.
Doing this enables those attributes to have range checks applied, as
the validator will then convert to host endianness prior to validation.
The autogenerated kernel/uapi code have been regenerated by running:
./tools/net/ynl/ynl-regen.sh -f
This changes the policy types of the following attributes:
FOU_ATTR_PORT (NLA_U16 -> NLA_BE16)
FOU_ATTR_PEER_PORT (NLA_U16 -> NLA_BE16)
These two are used with nla_get_be16/nla_put_be16().
MPTCP_PM_ADDR_ATTR_ADDR4 (NLA_U32 -> NLA_BE32)
This one is used with nla_get_in_addr/nla_put_in_addr(),
which uses nla_get_be32/nla_put_be32().
IOWs the generated changes are AFAICT aligned with their implementations.
The generated userspace code remains identical, and have been verified
by comparing the output generated by the following command:
make -C tools/net/ynl/generated
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241017094704.3222173-1-ast@fiberby.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c4 ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In a previous fix, the in-kernel path-manager has been modified not to
retrigger the removal of a subflow if it was already closed, e.g. when
the initial subflow is removed, but kept in the subflows list.
To be complete, this fix should also skip the subflows that are in any
closing state: mptcp_close_ssk() will initiate the closure, but the
switch to the TCP_CLOSE state depends on the other peer.
Fixes: 58e1b66b4e ("mptcp: pm: do not remove already closed subflows")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-4-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As reported by Christoph [1], before this patch, an MPTCP connection was
wrongly reset when a host received a first data packet with MPTCP
options after the 3wHS, but got the next ones without.
According to the MPTCP v1 specs [2], a fallback should happen in this
case, because the host didn't receive a DATA_ACK from the other peer,
nor receive data for more than the initial window which implies a
DATA_ACK being received by the other peer.
The patch here re-uses the same logic as the one used in other places:
by looking at allow_infinite_fallback, which is disabled at the creation
of an additional subflow. It's not looking at the first DATA_ACK (or
implying one received from the other side) as suggested by the RFC, but
it is in continuation with what was already done, which is safer, and it
fixes the reported issue. The next step, looking at this first DATA_ACK,
is tracked in [4].
This patch has been validated using the following Packetdrill script:
0 socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// 3WHS is OK
+0.0 < S 0:0(0) win 65535 <mss 1460, sackOK, nop, nop, nop, wscale 6, mpcapable v1 flags[flag_h] nokey>
+0.0 > S. 0:0(0) ack 1 <mss 1460, nop, nop, sackOK, nop, wscale 8, mpcapable v1 flags[flag_h] key[skey]>
+0.1 < . 1:1(0) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[ckey=2, skey]>
+0 accept(3, ..., ...) = 4
// Data from the client with valid MPTCP options (no DATA_ACK: normal)
+0.1 < P. 1:501(500) ack 1 win 2048 <mpcapable v1 flags[flag_h] key[skey, ckey] mpcdatalen 500, nop, nop>
// From here, the MPTCP options will be dropped by a middlebox
+0.0 > . 1:1(0) ack 501 <dss dack8=501 dll=0 nocs>
+0.1 read(4, ..., 500) = 500
+0 write(4, ..., 100) = 100
// The server replies with data, still thinking MPTCP is being used
+0.0 > P. 1:101(100) ack 501 <dss dack8=501 dsn8=1 ssn=1 dll=100 nocs, nop, nop>
// But the client already did a fallback to TCP, because the two previous packets have been received without MPTCP options
+0.1 < . 501:501(0) ack 101 win 2048
+0.0 < P. 501:601(100) ack 101 win 2048
// The server should fallback to TCP, not reset: it didn't get a DATA_ACK, nor data for more than the initial window
+0.0 > . 101:101(0) ack 601
Note that this script requires Packetdrill with MPTCP support, see [3].
Fixes: dea2b1ea9c ("mptcp: do not reset MP_CAPABLE subflow on mapping errors")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/518 [1]
Link: https://datatracker.ietf.org/doc/html/rfc8684#name-fallback [2]
Link: https://github.com/multipath-tcp/packetdrill [3]
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/519 [4]
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-3-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bugged peer implementation can send corrupted DSS options, consistently
hitting a few warning in the data path. Use DEBUG_NET assertions, to
avoid the splat on some builds and handle consistently the error, dumping
related MIBs and performing fallback and/or reset according to the
subflow type.
Fixes: 6771bfd9ee ("mptcp: update mptcp ack sequence from work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241008-net-mptcp-fallback-fixes-v1-1-c6fb8e93e551@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
delack timer is not stopped from inet_csk_clear_xmit_timer()
because we do not define INET_CSK_CLEAR_TIMERS.
This is a conscious choice : inet_csk_clear_xmit_timer()
is often called from another cpu. Calling del_timer()
would cause false sharing and lock contention.
This means that very often, tcp_delack_timer() is called
at the timer expiration, while there is no ACK to transmit.
This can be detected very early, avoiding the socket spinlock.
Notes:
- test about tp->compressed_ack is racy,
but in the unlikely case there is a race, the dedicated
compressed_ack_timer hrtimer would close it.
- Even if the fast path is not taken, reading
icsk->icsk_ack.pending and tp->compressed_ack
before acquiring the socket spinlock reduces
acquisition time and chances of contention.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241002173042.917928-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two paths to access mptcp_pm_del_add_timer, result in a race
condition:
CPU1 CPU2
==== ====
net_rx_action
napi_poll netlink_sendmsg
__napi_poll netlink_unicast
process_backlog netlink_unicast_kernel
__netif_receive_skb genl_rcv
__netif_receive_skb_one_core netlink_rcv_skb
NF_HOOK genl_rcv_msg
ip_local_deliver_finish genl_family_rcv_msg
ip_protocol_deliver_rcu genl_family_rcv_msg_doit
tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit
tcp_v4_do_rcv mptcp_nl_remove_addrs_list
tcp_rcv_established mptcp_pm_remove_addrs_and_subflows
tcp_data_queue remove_anno_list_by_saddr
mptcp_incoming_options mptcp_pm_del_add_timer
mptcp_pm_del_add_timer kfree(entry)
In remove_anno_list_by_saddr(running on CPU2), after leaving the critical
zone protected by "pm.lock", the entry will be released, which leads to the
occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1).
Keeping a reference to add_timer inside the lock, and calling
sk_stop_timer_sync() with this reference, instead of "entry->add_timer".
Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock,
do not directly access any members of the entry outside the pm lock, which
can avoid similar "entry->x" uaf.
Fixes: 00cfd77b90 ("mptcp: retransmit ADD_ADDR when timeout")
Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+f3a31fb909db9b2a5c4d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/tencent_7142963A37944B4A74EF76CD66EA3C253609@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An MPTCP firewall blackhole can be detected if the following SYN
retransmission after a fallback to "plain" TCP is accepted.
In case of blackhole, a similar technique to the one in place with TFO
is now used: MPTCP can be disabled for a certain period of time, 1h by
default. This time period will grow exponentially when more blackhole
issues get detected right after MPTCP is re-enabled and will reset to
the initial value when the blackhole issue goes away.
The blackhole period can be modified thanks to a new sysctl knob:
blackhole_timeout. Two new MIB counters help understanding what's
happening:
- 'Blackhole', incremented when a blackhole is detected.
- 'MPCapableSYNTXDisabled', incremented when an MPTCP connection
directly falls back to TCP during the blackhole period.
Because the technique is inspired by the one used by TFO, an important
part of the new code is similar to what can find in tcp_fastopen.c, with
some adaptations to the MPTCP case.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/57
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-3-da7ebb4cd2a3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, a few issues have been discovered around the creation of
additional subflows. Without these counters, it was difficult to point
out the reason why some subflows were not created as expected.
These counters should have been added earlier, because there is no other
simple ways to extract such information from the kernel, and understand
why subflows have not been created.
While at it, some pr_debug() have been added, just in case the errno
needs to be printed.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/509
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-3-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__mptcp_subflow_connect() is currently called from the path-managers,
which have all the required information to create subflows. No need to
call the PM again to re-iterate over the list of entries with RCU lock
to get more info.
Instead, it is possible to pass a mptcp_pm_addr_entry structure, instead
of a mptcp_addr_info one. The former contains the ifindex and the flags
that are required when creating the new subflow.
This is a partial revert of commit ee285257a9 ("mptcp: drop flags and
ifindex arguments").
While at it, the local ID can also be set if it is known and 0, to avoid
having to set it in the 'rebuild_header' hook, which will cause a new
iteration of the endpoint entries.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-2-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename all the helpers specific to the flushing operations to make it
clear that the intention is to flush all created subflows, and remove
all announced addresses, not just a specific selection.
That way, it is easier to understand why the id_avail_bitmap and
local_addr_used are reset at the end.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240902-net-next-mptcp-mib-mpjtx-misc-v1-1-d3e0f3773b90@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.
When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.
Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.
A consequence of that is that the SUB_CLOSED event can be seen twice:
# ip mptcp endpoint
1.1.1.1 id 1 subflow dev eth0
2.2.2.2 id 2 subflow dev eth1
# ip mptcp monitor &
[ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9
# ip mptcp endpoint delete id 1
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().
To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.
Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'local_addr_used' and 'add_addr_accepted' are decremented for addresses
not related to the initial subflow (ID0), because the source and
destination addresses of the initial subflows are known from the
beginning: they don't count as "additional local address being used" or
"ADD_ADDR being accepted".
It is then required not to increment them when the entrypoint used by
the initial subflow is removed and re-added during a connection. Without
this modification, this entrypoint cannot be removed and re-added more
than once.
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/512
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Reported-by: syzbot+455d38ecd5f655fc45cf@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/00000000000049861306209237f4@google.com
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It is possible to have in the list already closed subflows, e.g. the
initial subflow has been already closed, but still in the list. No need
to try to close it again, and increments the related counters again.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. It is specific per
connection.
When a global endpoint is deleted and re-added later, it can have a
different ID -- most services managing the endpoints automatically don't
force the ID to be the same as before. It is then important to track
these modifications to be consistent with the ID being used for the
address used by the initial subflow, not to confuse the other peer or to
send the ID 0 for the wrong address.
Now when removing an endpoint, msk->mpc_endpoint_id is reset if it
corresponds to this endpoint. When adding a new endpoint, the same
variable is updated if the address match the one of the initial subflow.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The lookup_subflow_by_daddr() helper checks if there is already a
subflow connected to this address. But there could be a subflow that is
closing, but taking time due to some reasons: latency, losses, data to
process, etc.
If an ADD_ADDR is received while the endpoint is being closed, it is
better to try connecting to it, instead of rejecting it: the peer which
has sent the ADD_ADDR will not be notified that the ADD_ADDR has been
rejected for this reason, and the expected subflow will not be created
at the end.
This helper should then only look for subflows that are established, or
going to be, but not the ones being closed.
Fixes: d84ad04941 ("mptcp: skip connecting the connected address")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Taking the first one on the list doesn't work in some cases, e.g. if the
initial subflow is being removed. Pick another one instead of not
sending anything.
Fixes: 84dfe3677a ("mptcp: send out dedicated ADD_ADDR packet")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow has a special local ID: 0. When an endpoint is being
deleted, it is then important to check if its address is not linked to
the initial subflow to send the right ID.
If there was an endpoint linked to the initial subflow, msk's
mpc_endpoint_id field will be set. We can then use this info when an
endpoint is being removed to see if it is linked to the initial subflow.
So now, the correct IDs are passed to mptcp_pm_nl_rm_addr_or_subflow(),
it is no longer needed to use mptcp_local_id_match().
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pr_debug() have been added in various places in MPTCP code to help
developers to debug some situations. With the dynamic debug feature, it
is easy to enable all or some of them, and asks users to reproduce
issues with extra debug.
Many of these pr_debug() don't end with a new line, while no 'pr_cont()'
are used in MPTCP code. So the goal was not to display multiple debug
messages on one line: they were then not missing the '\n' on purpose.
Not having the new line at the end causes these messages to be printed
with a delay, when something else needs to be printed. This issue is not
visible when many messages need to be printed, but it is annoying and
confusing when only specific messages are expected, e.g.
# echo "func mptcp_pm_add_addr_echoed +fmp" \
> /sys/kernel/debug/dynamic_debug/control
# ./mptcp_join.sh "signal address"; \
echo "$(awk '{print $1}' /proc/uptime) - end"; \
sleep 5s; \
echo "$(awk '{print $1}' /proc/uptime) - restart"; \
./mptcp_join.sh "signal address"
013 signal address
(...)
10.75 - end
15.76 - restart
013 signal address
[ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...)
(...)
=> a delay of 5 seconds: printed with a 10.36 ts, but after 'restart'
which was printed at the 15.76 ts.
The 'Fixes' tag here below points to the first pr_debug() used without
'\n' in net/mptcp. This patch could be split in many small ones, with
different Fixes tag, but it doesn't seem worth it, because it is easy to
re-generate this patch with this simple 'sed' command:
git grep -l pr_debug -- net/mptcp |
xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g"
So in case of conflicts, simply drop the modifications, and launch this
command.
Fixes: f870fa0b57 ("mptcp: Add MPTCP socket stubs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-4-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Looking only at the 'backup' flag can make sense in some cases, but it
is not the behaviour of the default packet scheduler when selecting
paths.
As explained in the commit b6a66e521a ("mptcp: sched: check both
directions for backup"), the packet scheduler should look at both flags,
because that was the behaviour from the beginning: the 'backup' flag was
set by accident instead of the 'request_bkup' one. Now that the latter
has been fixed, get_retrans() needs to be adapted as well.
Fixes: b6a66e521a ("mptcp: sched: check both directions for backup")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-3-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
