The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts drivers/media/* from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj@kernel.org>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
"struct vb2_ops" are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
36607 1156 0 37763 9383 drivers/media/usb/cx231xx/cx231xx-417.o
After:
=====
text data bss dec hex filename
36735 1016 0 37751 9377 drivers/media/usb/cx231xx/cx231xx-417.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tuner_remove <= free dvb_frontend
...
request_firmware_work_func <= the firmware is ready
load_firmware_cb <= but now the dvb_frontend has been freed
To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is
null, report a warning and just return.
[1]:
==================================================================
BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0
Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504
Call trace:
load_firmware_cb+0x1310/0x17a0
request_firmware_work_func+0x128/0x220
process_one_work+0x770/0x1824
worker_thread+0x488/0xea0
kthread+0x300/0x430
ret_from_fork+0x10/0x20
Allocated by task 6504:
kzalloc
tuner_probe+0xb0/0x1430
i2c_device_probe+0x92c/0xaf0
really_probe+0x678/0xcd0
driver_probe_device+0x280/0x370
__device_attach_driver+0x220/0x330
bus_for_each_drv+0x134/0x1c0
__device_attach+0x1f4/0x410
device_initial_probe+0x20/0x30
bus_probe_device+0x184/0x200
device_add+0x924/0x12c0
device_register+0x24/0x30
i2c_new_device+0x4e0/0xc44
v4l2_i2c_new_subdev_board+0xbc/0x290
v4l2_i2c_new_subdev+0xc8/0x104
em28xx_v4l2_init+0x1dd0/0x3770
Freed by task 6504:
kfree+0x238/0x4e4
tuner_remove+0x144/0x1c0
i2c_device_remove+0xc8/0x290
__device_release_driver+0x314/0x5fc
device_release_driver+0x30/0x44
bus_remove_device+0x244/0x490
device_del+0x350/0x900
device_unregister+0x28/0xd0
i2c_unregister_device+0x174/0x1d0
v4l2_device_unregister+0x224/0x380
em28xx_v4l2_init+0x1d90/0x3770
The buggy address belongs to the object at ffff8000d7ca2000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 776 bytes inside of
2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)
The buggy address belongs to the page:
page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0
flags: 0x7ff800000000100(slab)
raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[2]
Actually, it is allocated for struct tuner, and dvb_frontend is inside.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
MT8195 and MT8188 share a similar MDP3 macro-block, with minor
differences - as in, the latter supports a subset of the number
of components supported by the former, but are otherwise handled
in the same way.
Add driver data for MT8188, reusing the already present MT8195
data where possible.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a compatible for MediaTek MT8188 RDMA, which supports only a
subset of the MDP3 components of its similar MT8195 counterpart.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZnCazSIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kFxIA/3j8nOqL+Z8g
DSUH3uOWoVybCVQHJVfA3VKdsFlO9dv7APoCjWldnbb2eL/JaFjes1cNZAiEYjFh
tySxUHYNLSrlAw==
=a6zw
-----END PGP SIGNATURE-----
Merge tag 'tags/media-next-uvc-20240617-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git into media_stage
uvcvideo fixes and improvements:
- add/fix quirks
- improve timestamp handling
- improve Power Line Frequency handling
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/rc/rc-core.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
We do not have any quirk device making us of this. Remove from now. It
can be easily reverted later if needed.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
We can use heuristics to figure out the proper range of the control
instead of quirking every single device.
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
We do not have more version specific mappings. Let's remove this code
for now. It can be easily reverted later if needed.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
The UVC 1.5 standard defines 4 values for the PLF control: Off, 50Hz,
60Hz and Auto. But it does not clearly define if all the values must be
implemented or not.
Instead of just using the UVC version to determine what the PLF control
can do, probe it.
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Move the PLF mapping logic to its own mapping filter function. This
commit does not introduce any new functionality to the logic, it is just
a preparation patch.
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Some advanced controls might not be completely implemented by vendors.
If the controls are a enumeration, UVC does not gives a way to probe
what is implemented and what is not.
Let's create a new callback function where heuristics can be implemented
to detect what is implemented and what not and update the control
mapping accordingly.
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
The bandwidth fixup quirk doesn't know that SuperSpeed exists and has
the same 8 service intervals per millisecond as High Speed, hence its
calculations are wrong.
Assume that all speeds from HS up use 8 intervals per millisecond.
No further changes are needed, updated code has been confirmed to work
with all speeds from FS to SS.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240414190040.2255a0bc@foxbook
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
When the UVC device has a control that is readonly it doesn't set the
SET_CUR flag. For example the privacy control has SET_CUR flag set in
the defaults in the `uvc_ctrls` variable. Even if the device does not
have it set, it's not cleared by uvc_ctrl_get_flags().
Originally written with assignment in commit 859086ae3636 ("media:
uvcvideo: Apply flags from device to actual properties"). But changed to
|= in commit 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable
flags"). It would not clear the default flags.
With this patch applied the correct flags are reported to user space.
Tested with:
```
> v4l2-ctl --list-ctrls | grep privacy
privacy 0x009a0910 (bool) : default=0 value=0 flags=read-only
```
Signed-off-by: Daniel Schaefer <dhs@frame.work>
Fixes: 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable flags")
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240602065053.36850-1-dhs@frame.work
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Struct uvc_frame and interval (u32*) are packaged together on
streaming->formats on a single contiguous allocation.
Right now they are allocated right after uvc_format, without taking into
consideration their required alignment.
This is working fine because both structures have a field with a
pointer, but it will stop working when the sizeof() of any of those
structs is not a multiple of the sizeof(void*).
Enforce that alignment during the allocation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240404-uvc-align-v2-1-9e104b0ecfbd@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
In UVC 1.5 we get a single clock value per frame. With the current
buffer size of 32, FPS slowers than 32 might roll-over twice.
The current code cannot handle two roll-over and provide invalid
timestamps.
Revome all the samples from the circular buffer that are more than two
rollovers old, so the algorithm always provides good timestamps.
Note that we are removing values that are more than one second old,
which means that there is enough distance between the two points that
we use for the interpolation to provide good values.
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240610-hwtimestamp-followup-v1-1-f9eaed7be7f0@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Isolate all the changes related to the clock circular buffer to its own
function, that way we can make changes easier to the buffer logic.
Also simplify the lock, by removing the circular buffer clock handling
from uvc_video_clock_decode().
And now that we are at it, unify the API of the clock functions.
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-5-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
With UVC 1.5 we get as little as one clock sample per frame. Which means
that it takes 32 frames to move from the software timestamp to the
hardware timestamp method.
This results in abrupt changes in the timestamping after 32 frames (~1
second), resulting in noticeable artifacts when used for encoding.
With this patch we modify the update algorithm to work with whatever
amount of values are available.
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-4-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Logitech C922 internal SOF does not increases at a stable rate of 1kHz.
This causes that the device_sof and the host_sof run at different rates,
breaking the clock domain conversion algorithm. Eg:
30 (6) [-] none 30 614400 B 21.245557 21.395214 34.133 fps ts mono/SoE
31 (7) [-] none 31 614400 B 21.275327 21.427246 33.591 fps ts mono/SoE
32 (0) [-] none 32 614400 B 21.304739 21.459256 34.000 fps ts mono/SoE
33 (1) [-] none 33 614400 B 21.334324 21.495274 33.801 fps ts mono/SoE
* 34 (2) [-] none 34 614400 B 21.529237 21.527297 5.130 fps ts mono/SoE
* 35 (3) [-] none 35 614400 B 21.649416 21.559306 8.321 fps ts mono/SoE
36 (4) [-] none 36 614400 B 21.678789 21.595320 34.045 fps ts mono/SoE
...
99 (3) [-] none 99 614400 B 23.542226 23.696352 33.541 fps ts mono/SoE
100 (4) [-] none 100 614400 B 23.571578 23.728404 34.069 fps ts mono/SoE
101 (5) [-] none 101 614400 B 23.601425 23.760420 33.504 fps ts mono/SoE
* 102 (6) [-] none 102 614400 B 23.798324 23.796428 5.079 fps ts mono/SoE
* 103 (7) [-] none 103 614400 B 23.916271 23.828450 8.478 fps ts mono/SoE
104 (0) [-] none 104 614400 B 23.945720 23.860479 33.957 fps ts mono/SoE
Instead of disabling completely the hardware timestamping for such
hardware we take the assumption that the packet handling jitter is
under 2ms and use the host_sof as dev_sof.
We can think of the UVC hardware clock as a system with a coarse clock
(the SOF) and a fine clock (the PTS). The coarse clock can be replaced
with a clock on the same frequency, if the jitter of such clock is
smaller than its sampling rate. That way we can save some of the
precision of the fine clock.
To probe this point we have run three experiments on the Logitech C922.
On that experiment we run the camera at 33fps and we analyse the
difference in msec between a frame and its predecessor. If we display
the histogram of that value, a thinner histogram will mean a better
meassurement. The results for:
- original hw timestamp: https://ibb.co/D1HJJ4x
- pure software timestamp: https://ibb.co/QC9MgVK
- modified hw timestamp: https://ibb.co/8s9dBdk
This bug in the camera firmware has been confirmed by the vendor.
lsusb -v
Bus 001 Device 044: ID 046d:085c Logitech, Inc. C922 Pro Stream Webcam
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0x085c C922 Pro Stream Webcam
bcdDevice 0.16
iManufacturer 0
iProduct 2 C922 Pro Stream Webcam
iSerial 1 80B912DF
bNumConfigurations 1
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-3-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Some SunplusIT cameras took a borderline interpretation of the UVC 1.5
standard, and fill the PTS and SCR fields with invalid data if the
package does not contain data.
"STC must be captured when the first video data of a video frame is put
on the USB bus."
Some SunplusIT devices send, e.g.,
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000
buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a
While the UVC specification meant that the first two packets shouldn't
have had the SCR bit set in the header.
This borderline/buggy interpretation has been implemented in a variety
of devices, from directly SunplusIT and from other OEMs that rebrand
SunplusIT products. So quirking based on VID:PID will be problematic.
All the affected modules have the following extension unit:
VideoControl Interface Descriptor:
guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d}
But the vendor plans to use that GUID in the future and fix the bug,
this means that we should use heuristic to figure out the broken
packets.
This patch takes care of this.
lsusb of one of the affected cameras:
Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2 ?
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x1bcf Sunplus Innovation Technology Inc.
idProduct 0x2a01
bcdDevice 0.02
iManufacturer 1 SunplusIT Inc
iProduct 2 HanChen Wise Camera
iSerial 3 01.00.00
bNumConfigurations 1
Tested-by: HungNien Chen <hn.chen@sunplusit.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-2-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The tail of the list lives at the position before the head. This is
mathematically noted as:
```
(head-1) mod size.
```
Unfortunately C, does not have a modulus operator, but a remainder
operator (%).
The reminder operation has a different result than the modulus if
(head -1) is a negative number and size is not a power of two.
Adding size to (head-1) allows the code to run with any value of size.
This does not change the current behaviour of the driver, as the size is
always a power of two, but avoid tedious debugging if we ever change its
size.
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-1-b08e590d97c7@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-async.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/v4l2-core/v4l2-fwnode.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace instance of of_node_put with __free(device_node)
to protect against any memory leaks due to future changes
in control flow.
Signed-off-by: Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the
same naming scheme as the vast majority of device drivers.
The device tree binding does not fall into binding rename exceptions and
therefore must not be changed. Keep its legacy name.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
It was reported to me that the imx219 didn't work on one of our
development kits partly because the access sequence is incorrect.
The datasheet I could find [1] for this camera has the access sequence:
Seq. No. Address (Hex) data
1 30EB 05
2 30EB 0C
3 300A FF
4 300B FF
5 30EB 05
6 30EB 09
but the driver swaps the first two elements. Laurent pointed out on IRC
that the original code used the correct sequence for 1920x1080 but the
current sequence for 3280x2464 and 1640x1232. During refactoring of the
init sequence the current order was used for all formats.
Switch to using the documented sequence.
Link: https://www.opensourceinstruments.com/Electronics/Data/IMX219PQ.pdf [1]
Fixes: 8508455961d5 ("media: i2c: imx219: Split common registers from mode tables")
Fixes: 1283b3b8f82b ("media: i2c: Add driver for Sony IMX219 sensor")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The ov2680 driver has 9 controls now and the call to
v4l2_ctrl_new_fwnode_properties() adds 2 more.
Tell v4l2_ctrl_handler_init() to pre-allocate space for 11
controls to match this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The out of tree IPU6 driver comes with its own copy of the ipu-bridge code.
It also comes bundled with standard v4l2 sensor drivers. Many of these have
been mainlined and the rest is being mainlined but not all are upstream
yet.
The latest version of the out of tree code now will use the mainline kernel
ipu-bridge version when build against new enough kernels.
This however breaks support for (bundled) sensor drivers which do not (yet)
have an entry in the mainline ipu-bridge code.
Add the missing entries to the mainline ipu-bridge code to make
the transition to having everything in mainline easier.
The alternative HID for the OV13B10 and the OV08x40 entries both are for
sensors already supported in mainline which were missing.
The downside of adding these HIDs is that this will cause the IPU3 / IPU6
drivers to delay registering there /dev/video# nodes until a sensor driver
has bound, which for the non mainline drivers may never happen. This is
not really an issue because almost all IPU designs only have front (user)
facing sensors and all the added HIDs are for the main RGB (not IR) sensor.
So if the sensor driver is missing then the user can already not use
the camera and adding these HIDs does not really change that.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Sort the sensors in ipu_supported_sensors[] by ACPI HID rather then having
them in some random order.
While at it also use the correct (same as datasheet) capitalization
for the sensor names in the comments. Instead of sometimes writing
OV#### and sometimes ov####.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Into alvium cameras REG_BCRM_GAIN_RW control the analog gain.
Let's use the right V4L2_CID_ANALOGUE_GAIN ctrl.
Fixes: 0a7af872915e ("media: i2c: Add support for alvium camera")
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Implement the enum_frame_size pad operation.
The sensor supports a continuous size range of resolutions.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Alvium camera by default is in free running mode. Datasheet say that
acquisition frame rate reg can only be used if frame start trigger
mode is set to off.
Enable r/w acquisition frame rate and turn off trigger mode.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acquisition frame rate enable reg have a very long name let's reduce this
with an abbreviation.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
[Sakari Ailus: Fix spelling of "acquisition".]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Instead of reading device_fw reg as multiple regs let's read the entire
64bit reg using one i2c read and use bit masks and bit shifts to get fw
info.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The privacy status is maintained by privacy_ctrl, on which all
of the privacy status changes will go through, so there is no
point in maintaining one more element any more.
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Prior to the ongoing command privacy is on, it would return -1 to
indicate the current privacy status, and the ongoing command would
be well executed by firmware as well, so this is not error. This
patch changes its behavior to notify privacy on directly by V4L2
privacy control instead of reporting error.
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There're possibilities that privacy status change notification happens
in the middle of the ongoing mei command which already takes the command
lock, but v4l2_ctrl_s_ctrl() would also need the same lock prior to this
patch, so this may results in circular locking problem. This patch adds
one dedicated lock for v4l2 control handler to avoid described issue.
Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org # for 6.6 and later
Reported-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Tested-by: Jason Chen <jason.z.chen@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
clang 19 complains about the missing parameter name. Let's add it.
drivers/media/platform/st/sti/c8sectpfe/c8sectpfe-debugfs.h:19:62: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406050908.1kL1C69p-lkp@intel.com/
Fixes: e22b4973ee20 ("media: c8sectpfe: Do not depend on DEBUG_FS")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/tuners/tda9887.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/radio/si470x/radio-si470x-common.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ttpci/budget-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/bt8xx/bt878.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/ivtv/ivtvfb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007-usb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mcam-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/marvell/mmp_camera.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Return value of function 'i2c_transfer' is not checked that
may cause undefined behaviour.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2cf36ac44730 ("[PATCH] v4l: 656: added support for the following cards")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The CENTERED_RECTANGLE define fails to compile on clang and old gcc
versions. Just drop it and fill in the crop rectangles explicitly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
