Pass the duration of a lifetime (in seconds) to the function
rt6_add_dflt_router() so that it can properly set the expiration time.
The function ndisc_router_discovery() is the only one that calls
rt6_add_dflt_router(), and it will later set the expiration time for the
route created by rt6_add_dflt_router(). However, there is a gap of time
between calling rt6_add_dflt_router() and setting the expiration time in
ndisc_router_discovery(). During this period, there is a possibility that a
new route may be removed from the routing table. By setting the correct
expiration time in rt6_add_dflt_router(), we can prevent this from
happening. The reason for setting RTF_EXPIRES in rt6_add_dflt_router() is
to start the Garbage Collection (GC) timer, as it only activates when a
route with RTF_EXPIRES is added to a table.
Suggested-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test is time sensitive. It may fail on virtual machines and for
debug builds.
Similar to commit c41dfb0dfb ("selftests/net: ignore timing errors in
so_txtime if KSFT_MACHINE_SLOW"), optionally suppress failure for timing
errors (only).
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shinas Rasheed says:
====================
add octeon_ep_vf driver
This driver implements networking functionality of Marvell's Octeon
PCI Endpoint NIC VF.
This driver support following devices:
* Network controller: Cavium, Inc. Device b203
* Network controller: Cavium, Inc. Device b403
* Network controller: Cavium, Inc. Device b103
* Network controller: Cavium, Inc. Device b903
* Network controller: Cavium, Inc. Device ba03
* Network controller: Cavium, Inc. Device bc03
* Network controller: Cavium, Inc. Device bd03
Changes:
V7:
- Separated octep_vf_get_if_stats from octep_vf_main.h to later patch
in [1/8]
- Moved introducing ndo_ops from [3/8] to [5/8]
V6: https://lore.kernel.org/all/20240207065207.3092004-1-srasheed@marvell.com/
- Removed reuse of netif_tx_stop_all_queues, called implicitly in
netif_tx_disable, when stopping netdev
- Corrected error jump labels to have proper action-specific names in
probe function
- Removed singlethreaded workqueue implementation, since only tx
timeout task is run. Run the same in the system workqueue
- netdev_hold when tx_timeout happens to protect against free_netdev
if race occurs between rmmod and a tx timeout. netdev_put the
reference when timeout task ends to progress freeing netdev
V5: https://lore.kernel.org/all/20240129050254.3047778-1-srasheed@marvell.com/
- Changed unchecked return types to void and removed unnecessary
initializations in [2/8] patch.
V4: https://lore.kernel.org/all/20240108124213.2966536-1-srasheed@marvell.com/
- Moved some stats from ethtool and added more to ndo_get_stats64
- Replaced code in IQ full check function to use helper from
net/netdev_queues.h
- Refactored code so that NETDEV_TX_BUSY is avoided
V3: https://lore.kernel.org/all/20240105203823.2953604-1-srasheed@marvell.com/
- Removed UINT64_MAX, which is unused
- Replaced masks and ULL declarations with GENMASK_ULL(), ULL() and
other linux/bits.h macros, corrected declarations to conform to xmas tree format in patch [2/8]
- Moved vfree and vzalloc null pointer casting corrections to patch
[3/8], and corrected return values to follow standard kernel error codes in same
- Set static budget of 64 for tx completion processing in NAPI
- Replaces napi_complete and build_skb APIs to napi_complete_done and
napi_build_skb APIs respectively
- Replaced code with helper from net/netdev_queues.h to wake queues in TX completion
processing
- Removed duplicate reporting of TX/RX packets/bytes, which is already
done during ndo_get_stats64
V2: https://lore.kernel.org/all/20231223134000.2906144-1-srasheed@marvell.com/
- Removed linux/version.h header file from inclusion in
octep_vf_main.c
- Corrected Makefile entry to include building octep_vf_mbox.c in
[6/8] patch.
- Removed redundant vzalloc pointer cast and vfree pointer check in
[6/8] patch.
V1: https://lore.kernel.org/all/20231221092844.2885872-1-srasheed@marvell.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the following ethtool commands:
ethtool -i|--driver devname
ethtool devname
ethtool -S|--statistics devname
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to enable MSI-x and register interrupts.
Add support to process Tx and Rx traffic. Includes processing
Tx completions and Rx refill.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ndo ops to set MAC address, change MTU, get stats.
Add control path support to set MAC address, change MTU, get stats,
set speed, get and set link mode.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement Tx/Rx ring resource allocation and cleanup.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement VF-PF mailbox to send all control commands from VF to PF
and receive responses and notifications from PF to VF.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement hardware resource init and shutdown helper APIs, like
hardware Tx/Rx queue init/enable/disable/reset.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC VF.
Add implementation to load module, initialize, register network device,
cleanup and unload module.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi says:
====================
net: phy: Introduce PHY Package concept
Idea of this big series is to introduce the concept of PHY package in DT
and give PHY drivers a way to derive the base address from DT.
The concept of PHY package is nothing new and is already a thing in the
kernel with the API phy_package_join/leave/read/write.
What is currently lacking is describing this in DT and better reference
a base address to calculate offset from.
In the scenario of a PHY package where multiple address are used and
there isn't a way to get the base address of the PHY package from some
regs, getting the information from DT is the only way.
A possible example to this problem is this:
ethernet-phy-package@0 {
compatible = "qcom,qca8075-package";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
qcom,package-mode = "qsgmii";
ethernet-phy@1 {
reg = <1>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
The mdio parse functions are changed to address for this additional
special node, the function is changed to simply detect this node and
search also in this. (we match the node name to be "ethernet-phy-package")
PHY driver can then use introduced helper of_phy_package_join to join the
PHY to the PHY package and derive the base address from DT.
Changes v7:
- Rebase on top of net-next
- Add Reviewed-by tag for DT patch
- Change tx-driver-strength to tx-drive-strength
- Drop driver reference in DT
Changes v6:
- Back to absolute PHY implementation
- Correctly drop refcount for node on error condition and on PHY leave
- Drop DT include patch in favor for 3 boolean vendor property
- Fix Documentation problem for compatible and missing type and
description
- Drop redundand gpio-controller dependency and description
- Skip scanphy with invalid PHY Package node and make reg mandatory
- Rework fiber read status to use more generic function
- Split qca808x LED generalization patch to permit easier review
- Correctly return -EINVAL with wrong data passed to vendor property
- Drop removing LED ops for qca807x PHY driver with gpio-controller
Changes v5:
- Rebase on top of net-next
- Change implementation to base addr + offset in subnode
- Adapt to all the changes and cleanup done to at803x
Changes v4:
- Rework DT implementation
- Drop of autojoin support and rework to simple helper
- Rework PHY driver to the new implementation
- Add compatible for qca807x package
- Further cleanup patches
Changes v3:
- Add back compatible implementation
- Detach patch that can be handled separately (phy_package_mmd,
phy_package extended)
- Rework code to new simplified implementation with base addr + offset
- Improve documentation with additional info and description
Changes v2:
- Drop compatible "ethernet-phy-package", use node name prefix matching
instead
- Improve DT example
- Add reg for ethernet-phy-package
- Drop phy-mode for ethernet-phy-package
- Drop patch for generalization of phy-mode
- Drop global-phy property (handle internally to the PHY driver)
- Rework OF phy package code and PHY driver to handle base address
- Fix missing of_node_put
- Add some missing docs for added variables in struct
- Move some define from dt-bindings include to PHY driver
- Handle qsgmii validation in PHY driver
- Fix wrong include for gpiolib
- Drop reduntant version.h include
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
QCA8072/5 have up to 2 LEDs attached for PHY.
LEDs can be configured to be ON/hw blink or be set to HW control.
Hw blink mode is set to blink at 4Hz or 250ms.
PHY can support both copper (TP) or fiber (FIBRE) kind and supports
different HW control modes based on the port type.
HW control modes supported for netdev trigger for copper ports are:
- LINK_10
- LINK_100
- LINK_1000
- TX
- RX
- FULL_DUPLEX
- HALF_DUPLEX
HW control modes supported for netdev trigger for fiber ports are:
- LINK_100
- LINK_1000
- TX
- RX
- FULL_DUPLEX
- HALF_DUPLEX
LED support conflicts with GPIO controller feature and must be disabled
if gpio-controller is used for the PHY.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generalize some qca808x LED functions in preparation for qca807x LED
support.
The LED implementation of qca808x and qca807x is the same but qca807x
supports also Fiber port and have different hw control bits for Fiber
port. To limit code duplication introduce micro functions that takes reg
instead of LED index to tweak all the supported LED modes.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The LED implementation of qca808x and qca807x is the same but qca807x
supports also Fiber port and have different hw control bits for Fiber
port.
In preparation for qca807x introduction, move all the common define to
shared header.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.
They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te,
100BASE-TX and 1000BASE-T PHY-s.
They feature 2 SerDes, one for PSGMII or QSGMII connection with
MAC, while second one is SGMII for connection to MAC or fiber.
Both models have a combo port that supports 1000BASE-X and
100BASE-FX fiber.
PHY package can be configured in 3 mode following this table:
First Serdes mode Second Serdes mode
Option 1 PSGMII for copper Disabled
ports 0-4
Option 2 PSGMII for copper 1000BASE-X / 100BASE-FX
ports 0-4
Option 3 QSGMII for copper SGMII for
ports 0-3 copper port 4
Each PHY inside of QCA807x series has 4 digitally controlled
output only pins that natively drive LED-s.
But some vendors used these to driver generic LED-s controlled
by userspace, so lets enable registering each PHY as GPIO
controller and add driver for it.
These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x
boards.
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some PHY driver might require additional regs call after
genphy_c37_read_status() is called.
Expand genphy_c37_read_status to provide a bool wheather the link has
changed or not to permit PHY driver to skip additional regs call if
nothing has changed.
Every user of genphy_c37_read_status() is updated with the new
additional bool.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document Qcom QCA807x PHY package.
Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
1000BASE-T PHY-s.
Document the required property to make the PHY package correctly
configure and work.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move more function to shared library in preparation for introduction of
new PHY Family qca807x that will make use of both functions from at803x
and qca808x as it's a transition PHY with some implementation of at803x
and some from the new qca808x.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devm/of_phy_package_join helper to join PHYs in a PHY package. These
are variant of the manual phy_package_join with the difference that
these will use DT nodes to derive the base_addr instead of manually
passing an hardcoded value.
An additional value is added in phy_package_shared, "np" to reference
the PHY package node pointer in specific PHY driver probe_once and
config_init_once functions to make use of additional specific properties
defined in the PHY package node in DT.
The np value is filled only with of_phy_package_join if a valid PHY
package node is found. A valid PHY package node must have the node name
set to "ethernet-phy-package".
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for scanning PHY in PHY package nodes. PHY packages nodes
are just container for actual PHY on the MDIO bus.
Their PHY address defined in the PHY package node are absolute and
reflect the address on the MDIO bus.
mdio_bus.c and of_mdio.c is updated to now support and parse also
PHY package subnode by checking if the node name match
"ethernet-phy-package".
As PHY package reg is mandatory and each PHY in the PHY package must
have a reg, every invalid PHY Package node is ignored and will be
skipped by the autoscan fallback.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document ethernet PHY package nodes used to describe PHY shipped in
bundle of 2-5 PHY. The special node describe a container of PHY that
share common properties. This is a generic schema and PHY package
should create specialized version with the required additional shared
properties.
Example are PHY packages that have some regs only in one PHY of the
package and will affect every other PHY in the package, for example
related to PHY interface mode calibration or global PHY mode selection.
The PHY package node MUST declare the base address used by the PHY driver
for global configuration by calculating the offsets of the global PHY
based on the base address of the PHY package.
Each reg of the PHYs defined in the PHY package node is absolute and
describe the real address of the Ethernet PHY on the bus.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
igc: ethtool: Flex filter cleanup
Kurt Kanzenbach says:
This series contains some cosmetics for the flex filter code. The fixes have
been merged separately via -net already.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Unify filtering rule fields
igc: Use netdev printing functions for flex filters
igc: Use reverse xmas tree
====================
Link: https://lore.kernel.org/r/20240207191656.1250777-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpgso regression test configures routing and device MTU directly through
uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it,
it takes more effort than doing it from shell.
Looking forward, we would like to extend the udpgso regression tests to
cover the EIO corner case [1], once it gets addressed. That will require a
dummy device and device feature manipulation to set it up. Which means more
Netlink code.
So, in preparation, pull out network configuration into the shell script
part of the test, so it is easily extendable in the future.
Also, because it now easy to setup routing, add a second local IPv6
address. Because the second address is not managed by the kernel, we can
"replace" the corresponding local route with a reduced-MTU one. This
unblocks the disabled "ipv6 connected" test case. Add a similar setup for
IPv4 for symmetry.
[1] https://lore.kernel.org/netdev/87jzqsld6q.fsf@cloudflare.com/
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20240207-jakub-krn-635-v3-1-3dfa3da8a7d3@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert EEE handling to use linkmode bitmaps. This prepares for
removing the legacy bitmaps from struct ethtool_keee.
No functional change intended.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/c5a61d57-d2b0-427f-93b3-fcf7721165f3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert EEE handling to use linkmode bitmaps. This prepares for
removing the legacy bitmaps from struct ethtool_keee.
No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/948562fb-c5d8-4912-8b88-bec56238732a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 3a2746320403 ("leds: trigger: netdev: Display only supported link
speed attribute") the check for valid link modes can be simplified.
In addition factor it out, so that it can be re-used by the upcoming
LED support for RTL8125.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/8876a9f4-7a2d-48c3-8eae-0d834f5c27c5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The altnames test uses the forwarding/lib.sh and that dependency
currently causes failures when running the test after install:
make -C tools/testing/selftests/ TARGETS=net install
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:altnames.sh
# ...
# ./altnames.sh: line 8: ./forwarding/lib.sh: No such file or directory
# RTNETLINK answers: Operation not permitted
# ./altnames.sh: line 73: tests_run: command not found
# ./altnames.sh: line 65: pre_cleanup: command not found
Address the issue leveraging the TEST_INCLUDES infrastructure
provided by commit 2a0683be5b ("selftests: Introduce Makefile variable
to list shared bash scripts")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/f7b1e9d468224cbc136d304362315499fe39848f.1707298927.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Ntuple and RSS updates
This patch series adds more ntuple and RSS features following recent
patches to add support for user configured ntuple filters. Additional
features include L2 ether filters, partial tuple masks, IP filters
besides TCP/UDP, drop action, saving and re-applying user filters
after driver reset, user configured RSS key, and RSS for IPSEC.
====================
Link: https://lore.kernel.org/r/20240205223202.25341-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPSec uses two distinct protocols, Authentication Header (AH) and
Encapsulating Security Payload (ESP).
Add support to configure RSS based on AH and ESP headers.
This functionality will be enabled based on the capabilities
indicated by the firmware in HWRM_VNIC_QCAPS.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-14-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cached user filters slated to be reapplied need to
be cleared if configured MAC changes, RSS key changes,
number of rings changes, or ntuple is disabled.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-13-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the user configured or generated Toeplitz key in
bp->rss_hash_key. The key stays constant across ifdown/ifup
unless updated by the user.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-12-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Walk the usr_fltr_list and call firmware to add these filters when
we open the NIC. This will restore all user created filters after
reset.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-11-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver should not free user created filters from its memory
when closing since we are going to reconfigure them when
we open again. If the "all" parameter is false, do not free
user configured filters in bnxt_free_ntp_fltrs() and
bnxt_free_l2_filters().
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver needs to maintain a lookup list of all the user configured
filters. This is required in order to reconfigure these filters upon
interface toggle. We can look up this list to follow the order with
which they should be re-applied.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since we are going to do filter deletion at multiple places in the
upcoming patches, add a function that does the deletion. Future patches
add more code into this function.
Since we are passing the address of the filter base to free the
entire filter structure, add a comment to make sure that the base
is always at the beginning of the structure.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add drop action for protocols TCP/UDP/ICMP
1) Drop action for TCP/UDP is supported via flow type
tcp4/udp4/tcp6/udp6.
2) Drop action for ICMPV4/ICMPV6/wildcard is supported
via flow type ipv4/ipv6.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable flow type ipv4/ipv6
1) for protocols ICMPV4 and ICMPV6.
2) for wildcard match. Wildcard matches to TCP/UDP/ICMP.
Note that, IPPROTO_RAW(255) i.e. a reserved protocol
considered for a wildcard.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support subfield masking for IP addresses and ports. Previously, only
entire fields could be included or excluded in NTUPLE filters.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20240205223202.25341-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement ETHTOOL_GRXCLSRULE for the user defined ether filters. Use
the common functions to walk the L2 filter hash table.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20240205223202.25341-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add ETHTOOL_SRXCLSRLINS and ETHTOOL_SRXCLSRLDEL support for inserting
and deleting L2 ether filter rules. Destination MAC address and
optional VLAN are supported for each filter entry. This is currently
only supported on older BCM573XX and BCM574XX chips only.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240205223202.25341-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While individual filter structures are allocated as needed, there is an
array to keep track of the software filter IDs that we allocate ahead
of time. Rather than relying on a fixed maximum filter count to
allocate this array, get the maximum from the firmware when available.
Move these filter related maximum counts queried from the firmware to the
bnxt_hw_resc struct. If the firmware is not providing these maximum
counts, fall back to the hard-coded constant.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/r/20240205223202.25341-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 8 new mirred tdc tests that target mirred to block:
- Add mirred mirror to egress block action
- Add mirred mirror to ingress block action
- Add mirred redirect to egress block action
- Add mirred redirect to ingress block action
- Try to add mirred action with both dev and block
- Try to add mirred action without specifying neither dev nor block
- Replace mirred redirect to dev action with redirect to block
- Replace mirred redirect to block action with mirror to dev
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240202020726.529170-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A wrapper function is available since the commit 890cc39a87
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/f87065d0-e398-4ffa-bfa4-9ff99d73f206@web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A wrapper function is available since the commit 890cc39a87
("drivers: provide devm_platform_get_and_ioremap_resource()").
Thus reuse existing functionality instead of keeping duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/46f64db3-3f8f-4c6c-8d70-38daeefccac1@web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two tests that make use of multicast routig (router.sh and
router_multicast.sh) are currently failing in the netdev CI because the
kernel is missing multicast routing support.
Fix by adding the required config entries.
Fixes: 6d4efada3b ("selftests: forwarding: Add multicast routing test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208165538.1303021-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge netdev bits of io_uring busy polling support.
Jens Axboe says:
====================
io_uring: add napi busy polling support
I finally got around to testing this patchset in its current form, and
results look fine to me. It Works. Using the basic ping/pong test that's
part of the liburing addition, without enabling NAPI I get:
Stock settings, no NAPI, 100k packets:
rtt(us) min/avg/max/mdev = 31.730/37.006/87.960/0.497
and with -t10 -b enabled:
rtt(us) min/avg/max/mdev = 23.250/29.795/63.511/1.203
In short, this patchset enables per io_uring NAPI enablement, rather
than need to enable that globally. This allows targeted NAPI usage with
io_uring.
Here's Stefan's v15 posting, which predates this one:
https://lore.kernel.org/io-uring/20230608163839.2891748-1-shr@devkernel.io/
====================
Link: https://lore.kernel.org/r/20240206163422.646218-1-axboe@kernel.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds the napi_busy_loop_rcu() function. This function assumes that
the calling function is already holding the rcu read lock and
napi_busy_loop() does not need to take the rcu read lock. Add a
NAPI_F_NO_SCHED flag, which tells __napi_busy_loop() to abort if we
need to reschedule rather than drop the RCU read lock and reschedule.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Link: https://lore.kernel.org/r/20230608163839.2891748-3-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This splits off the key part of the napi_busy_poll function into its own
function, __napi_busy_poll, and changes the prefer_busy_poll bool to be
flag based to allow passing in more flags in the future.
This is done in preparation for an additional napi_busy_poll() function,
that doesn't take the rcu_read_lock(). The new function is introduced
in the next patch.
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Link: https://lore.kernel.org/r/20230608163839.2891748-2-shr@devkernel.io
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
