RISC-V perf driver does not yet support PERF_TYPE_BREAKPOINT. It would
be more appropriate to return -EOPNOTSUPP or -ENOENT for this type in
pmu_sbi_event_map. Considering that other implementations return -ENOENT
for unsupported perf types, let's synchronize this behavior. Due to this
reason, a riscv bpf testcases perf_skip fail. Meanwhile, align that
behavior to the rest of proper place.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Fixes: 9b3e150e31 ("RISC-V: Add a simple platform driver for RISC-V legacy perf")
Fixes: 16d3b1af09 ("perf: RISC-V: Check standard event availability")
Fixes: e999143459 ("RISC-V: Add perf platform driver based on SBI PMU extension")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240831071520.1630360-1-pulehui@huaweicloud.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Added the PERF_PMU_CAP_NO_INTERRUPT flag because the legacy pmu driver
does not provide sampling capabilities
Added the PERF_PMU_CAP_NO_EXCLUDE flag because the legacy pmu driver
does not provide the ability to disable counter incrementation in
different privilege modes
Suggested-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Fixes: 9b3e150e31 ("RISC-V: Add a simple platform driver for RISC-V legacy perf")
Link: https://lore.kernel.org/r/20240227170002.188671-2-vadim.shakirov@syntacore.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implement the needed callbacks in the legacy driver so that we can
directly access the counters through perf in userspace.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
RISCV_PMU_LEGACY_INSTRET used to be set to 1 whereas the offset of this
hardware counter from CSR_CYCLE is actually 2: make this offset match the
real hw offset so that we can directly expose those values to userspace.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
* Improvements to the CPU topology subsystem, which fix some issues
where RISC-V would report bad topology information.
* The default NR_CPUS has increased to XLEN, and the maximum
configurable value is 512.
* The CD-ROM filesystems have been enabled in the defconfig.
* Support for THP_SWAP has been added for rv64 systems.
There are also a handful of cleanups and fixes throughout the tree.
-----BEGIN PGP SIGNATURE-----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=LJg6
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Improvements to the CPU topology subsystem, which fix some issues
where RISC-V would report bad topology information.
- The default NR_CPUS has increased to XLEN, and the maximum
configurable value is 512.
- The CD-ROM filesystems have been enabled in the defconfig.
- Support for THP_SWAP has been added for rv64 systems.
There are also a handful of cleanups and fixes throughout the tree.
* tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: enable THP_SWAP for RV64
RISC-V: Print SSTC in canonical order
riscv: compat: s/failed/unsupported if compat mode isn't supported
RISC-V: Increase range and default value of NR_CPUS
cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usage
perf: RISC-V: throttle perf events
perf: RISC-V: exclude invalid pmu counters from SBI calls
riscv: enable CD-ROM file systems in defconfig
riscv: topology: fix default topology reporting
arm64: topology: move store_cpu_topology() to shared code
SBI firmware may not provide information for some counters in response
to SBI_EXT_PMU_COUNTER_GET_INFO call. Exclude such counters from the
subsequent SBI requests. For this purpose use global mask to keep track
of fully specified counters.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20220830155306.301714-3-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The old RISC-V perf implementation allowed counting of only
cycle/instruction counters using perf. Restore that feature by implementing
a simple platform driver under a separate config to provide backward
compatibility. Any existing software stack will continue to work as it is.
However, it provides an easy way out in future where we can remove the
legacy driver.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
