I got a deadloop report while doing device(ds2482) add/remove test:
[ 162.241881] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 163.272251] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 164.296157] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
...
__w1_remove_master_device() can't return, because the dev->refcnt is not zero.
w1_add_master_device() |
w1_alloc_dev() |
atomic_set(&dev->refcnt, 2) |
kthread_run() |
|__w1_remove_master_device()
| kthread_stop()
// KTHREAD_SHOULD_STOP is set, |
// threadfn(w1_process) won't be |
// called. |
kthread() |
| // refcnt will never be 0, it's deadloop.
| while (atomic_read(&dev->refcnt)) {...}
After calling w1_add_master_device(), w1_process() is not really
invoked, before w1_process() starting, if kthread_stop() is called
in __w1_remove_master_device(), w1_process() will never be called,
the refcnt can not be decreased, then it causes deadloop in remove
function because of non-zero refcnt.
We need to make sure w1_process() is really started, so move the
set refcnt into w1_process() to fix this problem.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221205080434.3149205-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(Actually, this is fixing the "Read the Current Status" command sent to
the device's outgoing mailbox, but it is only currently used for the PWM
instructions.)
The PCI-1760 is operated mostly by sending commands to a set of Outgoing
Mailbox registers, waiting for the command to complete, and reading the
result from the Incoming Mailbox registers. One of these commands is
the "Read the Current Status" command. The number of this command is
0x07 (see the User's Manual for the PCI-1760 at
<https://advdownload.advantech.com/productfile/Downloadfile2/1-11P6653/PCI-1760.pdf>.
The `PCI1760_CMD_GET_STATUS` macro defined in the driver should expand
to this command number 0x07, but unfortunately it currently expands to
0x03. (Command number 0x03 is not defined in the User's Manual.)
Correct the definition of the `PCI1760_CMD_GET_STATUS` macro to fix it.
This is used by all the PWM subdevice related instructions handled by
`pci1760_pwm_insn_config()` which are probably all broken. The effect
of sending the undefined command number 0x03 is not known.
Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230103143754.17564-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for needing them somewhere else, move them and get rid of
the unused 'issue_flags' for the unlock side.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When -Woverride-init is enabled in a build, gcc points out that
qcom_geni_serial_pm_ops contains conflicting initializers:
drivers/tty/serial/qcom_geni_serial.c:1586:20: error: initialized field overwritten [-Werror=override-init]
1586 | .restore = qcom_geni_serial_sys_hib_resume,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/tty/serial/qcom_geni_serial.c:1586:20: note: (near initialization for 'qcom_geni_serial_pm_ops.restore')
drivers/tty/serial/qcom_geni_serial.c:1587:17: error: initialized field overwritten [-Werror=override-init]
1587 | .thaw = qcom_geni_serial_sys_hib_resume,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Open-code the initializers with the version that was already used,
and use the pm_sleep_ptr() method to deal with unused ones,
in place of the __maybe_unused annotation.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221215165453.1864836-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console
setup") changed uart_set_options to select the correct baudrate
configuration based on the absolute error between requested baudrate and
available standard baudrate settings.
Prior to that commit the baudrate was selected based on which predefined
standard baudrate did not exceed the requested baudrate.
This change of selection logic was never reflected in the atmel serial
driver. Thus the comment left in the atmel serial driver is no longer
accurate.
Additionally the manual rounding up described in that comment and applied
via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses
tty_termios_encode_baud_rate to determine the appropriate baudrate flags
this can cause baudrate selection to fail entirely because
tty_termios_encode_baud_rate will only select a baudrate if relative error
between requested and selected baudrate does not exceed +/-2%.
Fix that by requesting actual, exact baudrate used by the serial.
Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup")
Cc: stable <stable@kernel.org>
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Link: https://lore.kernel.org/r/20230109072940.202936-1-t.schramm@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Run the following tests on the qemu platform:
syzkaller:~# modprobe speakup_audptr
input: Speakup as /devices/virtual/input/input4
initialized device: /dev/synth, node (MAJOR 10, MINOR 125)
speakup 3.1.6: initialized
synth name on entry is: (null)
synth probe
spk_ttyio_initialise_ldisc failed because tty_kopen_exclusive returned
failed (errno -16), then remove the module, we will get a null-ptr-defer
problem, as follow:
syzkaller:~# modprobe -r speakup_audptr
releasing synth audptr
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 204 Comm: modprobe Not tainted 6.1.0-rc6-dirty #1
RIP: 0010:mutex_lock+0x14/0x30
Call Trace:
<TASK>
spk_ttyio_release+0x19/0x70 [speakup]
synth_release.part.6+0xac/0xc0 [speakup]
synth_remove+0x56/0x60 [speakup]
__x64_sys_delete_module+0x156/0x250
? fpregs_assert_state_consistent+0x1d/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Modules linked in: speakup_audptr(-) speakup
Dumping ftrace buffer:
in_synth->dev was not initialized during modprobe, so we add check
for in_synth->dev to fix this bug.
Fixes: 4f2a81f3a882 ("speakup: Reference synth from tty and tty from synth")
Cc: stable <stable@kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221202060633.217364-1-cuigaosheng1@huawei.com
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmPHp2QACgkQSD+KveBX
+j6M/QgAoyMrhYAKC8xiD/yYMvzpQUbl1iMZpK+YhTMMbYCnnsNZSNHLpq2CRu/B
hqNCBvMOgZD37413UcyskpLuPSNUTQPQthKxui1R3BQyCMjvw3Qoso3ALGkxGh+M
OIak6FPx6Mh198FXGFFjK5kvmlrN4Z+A9vdIVP725M27JqhX4czOJDBVXBukV4+L
yxmRxVk926iMNUs4j4+iVlFbAssUEqQVbjg+eEZUkb60mgKLXK9lTE3+5ngybeZm
qjluUa7mukUMcR1fmR6jAiuHQSkn3xWHbS1ztTm14PTkpomn5JQ/mSqY6jxVfl1u
1AGNmx2k+Cca2z8/5MndhVafLOSe6g==
=tzWU
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net: mlx5: eliminate anonymous module_init & module_exit
net/mlx5: E-switch, Fix switchdev mode after devlink reload
net/mlx5e: Protect global IPsec ASO
net/mlx5e: Remove optimization which prevented update of ESN state
net/mlx5e: Set decap action based on attr for sample
net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT
net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
net/mlx5e: Avoid false lock dependency warning on tc_ht even more
net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Requesting an interrupt with IRQF_ONESHOT will run the primary handler
in the hard-IRQ context even in the force-threaded mode. The
force-threaded mode is used by PREEMPT_RT in order to avoid acquiring
sleeping locks (spinlock_t) in hard-IRQ context. This combination
makes it impossible and leads to "sleeping while atomic" warnings.
Use one interrupt handler for both handlers (primary and secondary)
and drop the IRQF_ONESHOT flag which is not needed.
Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Valentin Caron <valentin.caron@foss.st.com> # V3
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230112180417.25595-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In RS485 mode the transmission of a high priority character fails since it
is written to the data register before the transmitter is enabled. Fix this
in pl011_tx_chars() by enabling RS485 transmission before writing the
character.
Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support")
Cc: stable@vger.kernel.org
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20230108181735.10937-1-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A local variable sg is used to store scatterlist pointer in
pch_dma_tx_complete(). The for loop doing Tx byte accounting before
dma_unmap_sg() alters sg in its increment statement. Therefore, the
pointer passed into dma_unmap_sg() won't match to the one given to
dma_map_sg().
To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg()
instead of the local variable.
Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230103093435.4396-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on
default RX FIFO depth, e.g. 16. Later during serial startup the
qcom_geni_serial_port_setup() updates the RX FIFO depth
(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.
The RX UART handle code will read "port->rx_fifo_depth" number of words
into "port->rx_fifo" buffer, thus exceeding the bounds. This can be
observed in certain configurations with Qualcomm Bluetooth HCI UART
device and KASAN:
Bluetooth: hci0: QCA Product ID :0x00000010
Bluetooth: hci0: QCA SOC Version :0x400a0200
Bluetooth: hci0: QCA ROM Version :0x00000200
Bluetooth: hci0: QCA Patch Version:0x00000d2b
Bluetooth: hci0: QCA controller version 0x02000200
Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv
bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2
Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)
Bluetooth: hci0: QCA Failed to download patch (-2)
==================================================================
BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c
Write of size 4 at addr ffff279347d578c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x8c/0xb8
print_report+0x188/0x488
kasan_report+0xb4/0x100
__asan_store4+0x80/0xa4
handle_rx_uart+0xa8/0x18c
qcom_geni_serial_handle_rx+0x84/0x9c
qcom_geni_serial_isr+0x24c/0x760
__handle_irq_event_percpu+0x108/0x500
handle_irq_event+0x6c/0x110
handle_fasteoi_irq+0x138/0x2cc
generic_handle_domain_irq+0x48/0x64
If the RX FIFO depth changes after probe, be sure to resize the buffer.
Fixes: f9d690b6ece7 ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221221164022.1087814-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'parent' returned by fwnode_graph_get_port_parent()
with refcount incremented when 'prev' is not NULL, it
needs be put when finish using it.
Because the parent is const, introduce a new variable to
store the returned fwnode, then put it before returning
from fwnode_graph_get_next_endpoint().
Fixes: b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20221123022542.2999510-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt handler (pt_core_irq_handler()) of the ptdma
driver can be called from interrupt context. The code flow
in this function can lead down to pt_core_execute_cmd() which
will attempt to grab a mutex, which is not appropriate in
interrupt context and ultimately leads to a kernel panic.
The fix here changes this mutex to a spinlock, which has
been verified to resolve the issue.
Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Link: https://lore.kernel.org/r/20230119033907.35071-1-epilmore@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dwc3 core support now links against the extcon subsystem,
so it cannot be built-in when extcon is a loadable module:
arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon':
core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle'
arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev'
arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node'
There was already a Kconfig dependency in the dual-role support,
but this is now needed for the entire dwc3 driver.
It is still possible to build dwc3 without extcon, but this
prevents it from being set to built-in when extcon is a loadable
module.
Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230118090147.2126563-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura
free") uses the get/put_cpu() to protect the usage of percpu pointer
in ->aura_freeptr() callback, but it also unnecessarily disable the
preemption for the blockable memory allocation. The commit 87b93b678e95
("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to
fix these sleep inside atomic warnings. But it only fix the one for
the non-rt kernel. For the rt kernel, we still get the similar warnings
like below.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by swapper/0/1:
#0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
#1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4
#2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac
Preemption disabled at:
[<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284
CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace.part.0+0xe8/0xf4
show_stack+0x20/0x30
dump_stack_lvl+0x9c/0xd8
dump_stack+0x18/0x34
__might_resched+0x188/0x224
rt_spin_lock+0x64/0x110
alloc_iova_fast+0x1ac/0x2ac
iommu_dma_alloc_iova+0xd4/0x110
__iommu_dma_map+0x80/0x144
iommu_dma_map_page+0xe8/0x260
dma_map_page_attrs+0xb4/0xc0
__otx2_alloc_rbuf+0x90/0x150
otx2_rq_aura_pool_init+0x1c8/0x284
otx2_init_hw_resources+0xe4/0x3a4
otx2_open+0xf0/0x610
__dev_open+0x104/0x224
__dev_change_flags+0x1e4/0x274
dev_change_flags+0x2c/0x7c
ic_open_devs+0x124/0x2f8
ip_auto_config+0x180/0x42c
do_one_initcall+0x90/0x4dc
do_basic_setup+0x10c/0x14c
kernel_init_freeable+0x10c/0x13c
kernel_init+0x2c/0x140
ret_from_fork+0x10/0x20
Of course, we can shuffle the get/put_cpu() to only wrap the invocation
of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only
two ->aura_freeptr() callbacks, otx2_aura_freeptr() and
cn10k_aura_freeptr(). There is no usage of perpcu variable in the
otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it.
We can move the get/put_cpu() into the corresponding callback which
really has the percpu variable usage and avoid the sprinkling of
get/put_cpu() in several places.
Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20230118071300.3271125-1-haokexin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While one cpu is working on looking up the right socket from ehash
table, another cpu is done deleting the request socket and is about
to add (or is adding) the big socket from the table. It means that
we could miss both of them, even though it has little chance.
Let me draw a call trace map of the server side.
CPU 0 CPU 1
----- -----
tcp_v4_rcv() syn_recv_sock()
inet_ehash_insert()
-> sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
-> __sk_nulls_add_node_rcu(sk, list)
Notice that the CPU 0 is receiving the data after the final ack
during 3-way shakehands and CPU 1 is still handling the final ack.
Why could this be a real problem?
This case is happening only when the final ack and the first data
receiving by different CPUs. Then the server receiving data with
ACK flag tries to search one proper established socket from ehash
table, but apparently it fails as my map shows above. After that,
the server fetches a listener socket and then sends a RST because
it finds a ACK flag in the skb (data), which obeys RST definition
in RFC 793.
Besides, Eric pointed out there's one more race condition where it
handles tw socket hashdance. Only by adding to the tail of the list
before deleting the old one can we avoid the race if the reader has
already begun the bucket traversal and it would possibly miss the head.
Many thanks to Eric for great help from beginning to end.
Fixes: 5e0724d027f0 ("tcp/dccp: fix hashdance race for passive sessions")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/lkml/20230112065336.41034-1-kerneljasonxing@gmail.com/
Link: https://lore.kernel.org/r/20230118015941.1313-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Polling the completion can progress the request state to IDLE, either
inline with the completion, or through softirq. Either way, the state
may not be COMPLETED, so don't check for that. We only care if the state
isn't IN_FLIGHT.
This is fixing an issue where the driver aborts an IO that we just
completed. Seeing the "aborting" message instead of "polled" is very
misleading as to where the timeout problem resides.
Fixes: bf392a5dc02a9b ("nvme-pci: Remove tag from process cq")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This is a functional revert of c76b8308e4c9 ("nvme-apple: fix controller
shutdown in apple_nvme_disable").
The commit broke suspend/resume since apple_nvme_reset_work() tries to
disable the controller on resume. This does not work for the apple NVMe
controller since register access only works while the co-processor
firmware is running.
Disabling the NVMe controller in the shutdown path is also required
for shutting the co-processor down. The original code was appropriate
for this hardware. Add a comment to prevent a similar breaking changes
in the future.
Fixes: c76b8308e4c9 ("nvme-apple: fix controller shutdown in apple_nvme_disable")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/all/20230110174745.GA3576@jannau.net/
Signed-off-by: Janne Grunau <j@jannau.net>
[hch: updated with a more descriptive comment from Hector Martin]
Signed-off-by: Christoph Hellwig <hch@lst.de>
This reverts commit 0aa64df30b382fc71d4fb1827d528e0eb3eff854.
Currently IFF_NO_ADDRCONF is used to prevent all ipv6 addrconf for the
slave ports of team, bonding and failover devices and it means no ipv6
packets can be sent out through these slave ports. However, for team
device, "nsna_ping" link_watch requires ipv6 addrconf. Otherwise, the
link will be marked failure. This patch removes the IFF_NO_ADDRCONF
flag set for team port, and we will fix the original issue in another
patch, as Jakub suggested.
Fixes: 0aa64df30b38 ("net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/63e09531fc47963d2e4eff376653d3db21b97058.1673980932.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We often have to ping Willem asking for reviews of patches
because he doesn't get included in the CC list. Add MAINTAINERS
entries for some of the areas he covers so that ./scripts/ will
know to add him.
Acked-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Link: https://lore.kernel.org/r/20230117190141.60795-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.
Cc: roman.li@amd.com
Cc: yifan1.zhang@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Always enable multipipe policy on ASICs with GC VERSION > 9.0.0
instead of MEC number > 1.
This will allow multipipe policy on ASICs with one MEC,
e.g., gfx11 APUs.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
There is only one MEC on these APUs.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Currently, we run into a number of WARN()s when attempting to unload the
amdgpu driver (e.g. using "modprobe -r amdgpu"). These all stem from
calling drm_encoder_cleanup() too early. So, to fix this we can stop
calling drm_encoder_cleanup() from amdgpu_dm_fini() and instead have it
be called from amdgpu_dm_encoder_destroy(). Also, we don't need to free
in amdgpu_dm_encoder_destroy() since mst_encoders[] isn't explicitly
allocated by the slab allocator.
Fixes: f74367e492ba ("drm/amdgpu/display: create fake mst encoders ahead of time (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It can be that neither fence were initialized when we run out of UVD
streams for example.
v2: fix typo breaking compile
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2324
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
The YCC conversion matrix for RGB -> COLOR_SPACE_YCBCR2020_TYPE is
missing the values for the fourth column of the matrix.
The fourth column of the matrix is essentially just a value that is
added given that the color is 3 components in size.
These values are needed to bias the chroma from the [-1, 1] -> [0, 1]
range.
This fixes color being very green when using Gamescope HDR on HDMI
output which prefers YCC 4:4:4.
Fixes: 40df2f809e8f ("drm/amd/display: color space ycbcr709 support")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Code in get_output_color_space depends on knowing the pixel encoding to
determine whether to pick between eg. COLOR_SPACE_SRGB or
COLOR_SPACE_YCBCR709 for transparent RGB -> YCbCr 4:4:4 in the driver.
v2: Fixed patch being accidentally based on a personal feature branch, oops!
Fixes: ea117312ea9f ("drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We need to reset this or otherwise run into list corruption later on.
Fixes: e44a0fe630c5 ("drm/amdgpu: rework reserved VMID handling")
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Candice Li <candice.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Third set of fixes for v6.2. This time most of them are for drivers,
only one revert for mac80211. For an important mt76 fix we had to
cherry pick two commits from wireless-next.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmPHoUcRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtaCgf9G16rPowxI6AD+EliFbArdiwrV+mJHDyN
6eVniHDKgiFnvbyqvh+sGpbuYMwqqfERdxU3qi4+YhVGWyNNQYdJlntggKsTVRKK
gtE6h4zAo2DC6F+/zYt/FkQ6mCK6UQsaHDktGEqRP0vxH8Kdk85+yXEuwklI+L1L
w5ZTZ3HRxdtMhF9AmjCVOUrEEFXosanYTwSZ+1nlMEZ8vc5Wg5TH9wgue3Eg+9vx
vUjfRrrjOAlvGCcb9lVvPseH7n0m/U2JbugQkebuEUvzo4Fxcl2mR9pFXLGGbtAM
gseuNUfJftKVyYlTLc8brI7XpSSx6pV75h1EmvrHPkjiw1oSGeK8ig==
=13z+
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.2
Third set of fixes for v6.2. This time most of them are for drivers,
only one revert for mac80211. For an important mt76 fix we had to
cherry pick two commits from wireless-next.
* tag 'wireless-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "wifi: mac80211: fix memory leak in ieee80211_if_add()"
wifi: mt76: dma: fix a regression in adding rx buffers
wifi: mt76: handle possible mt76_rx_token_consume failures
wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
wifi: brcmfmac: avoid NULL-deref in survey dump for 2G only device
wifi: brcmfmac: avoid handling disabled channels for survey dump
====================
Link: https://lore.kernel.org/r/20230118073749.AF061C433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From smu firmware,the value of power is transferred in units of watts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321
Fixes: 137aac26a2ed ("drm/amdgpu/smu12: fix power reporting on renoir")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
Setting scaling does not correctly update CRTC state. As a result
dc stream state's src (composition area) && dest (addressable area)
was not calculated as expected. This causes set scaling doesn's work.
[How]
Correctly update CRTC state when setting scaling property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QW+x
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2023011801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fixes for potential empty list handling in HID core (Pietro Borrello)
- fix for NULL pointer dereference in betop driver that could be
triggered by malicious device (Pietro Borrello)
- fixes for handling calibration data preventing division by zero in
Playstation driver (Roderick Colenbrander)
- fix for memory leak on error path in amd-sfh driver (Basavaraj
Natikar)
- other few assorted small fixes and device ID-specific handling
* tag 'for-linus-2023011801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: betop: check shape of output reports
HID: playstation: sanity check DualSense calibration data.
HID: playstation: sanity check DualShock4 calibration data.
HID: uclogic: Add support for XP-PEN Deco 01 V2
HID: revert CHERRY_MOUSE_000C quirk
HID: check empty report_list in bigben_probe()
HID: check empty report_list in hid_validate_values()
HID: amd_sfh: Fix warning unwind goto
HID: intel_ish-hid: Add check for ishtp_dma_tx_map
Remove dfs_cache_update_tgthint() as it is not used anywhere.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
On async reads, page data is allocated before sending. When the
response is received but it has no data to fill (e.g.
STATUS_END_OF_FILE), __calc_signature() will still include the pages in
its computation, leading to an invalid signature check.
This patch fixes this by not setting the async read smb_rqst page data
(zeroed by default) if its got_bytes is 0.
This can be reproduced/verified with xfstests generic/465.
Cc: <stable@vger.kernel.org>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The ACPI PRM address space handler calls efi_call_virt_pointer() to
execute PRM firmware code, but doing so is only permitted when the EFI
runtime environment is available. Otherwise, such calls are guaranteed
to result in a crash, and must therefore be avoided.
Given that the EFI runtime services may become unavailable after a crash
occurring in the firmware, we need to check this each time the PRM
address space handler is invoked. If the EFI runtime services were not
available at registration time to being with, don't install the address
space handler at all.
Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=GZdS
-----END PGP SIGNATURE-----
Merge tag 'affs-for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs fix from David Sterba:
"One minor fix for a KCSAN report"
* tag 'affs-for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: initialize fsdata in affs_truncate()
- Fix wrong iomap->length calculation post EOF, which could
cause a WARN_ON in iomap_iter_done() (Siddh);
- Fix improper kvcalloc() use with __GFP_NOFAIL (me);
- Add missing `domain_id` mount option in documentation (Jingbo);
- Clean up fscache option parsing (Jingbo).
-----BEGIN PGP SIGNATURE-----
iIcEABYIAC8WIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCY8fsYREceGlhbmdAa2Vy
bmVsLm9yZwAKCRA5NzHcH7XmBBrMAP9ppGbdbQn2rRwsbnkOmTVhBzQKmQZgdBGc
AyqB3Nbn8QD/fyJO9DUeQXthj5QFc9P/i1R+D0QVlBjo/N6eaNiEvww=
=mPcL
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Two patches fixes issues reported by syzbot, one fixes a missing
`domain_id` mount option in documentation and a minor cleanup:
- Fix wrong iomap->length calculation post EOF, which could cause a
WARN_ON in iomap_iter_done() (Siddh)
- Fix improper kvcalloc() use with __GFP_NOFAIL (me)
- Add missing `domain_id` mount option in documentation (Jingbo)
- Clean up fscache option parsing (Jingbo)"
* tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clean up parsing of fscache related options
erofs: add documentation for 'domain_id' mount option
erofs: fix kvcalloc() misuse with __GFP_NOFAIL
erofs/zmap.c: Fix incorrect offset calculation
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmPHczkWHGNoZW5odWFj
YWlAa2VybmVsLm9yZwAKCRAChivD8uImenqQD/9iviY7RBfifv3eHijZL6I1SCoW
1AhJc5/+BoW2z9X86BAJ1de+U5EZUl6iHSwsNTu4hm/xUPTliZyZsjQ2ODSBGCZQ
8FvNaLwXFwVgsPoVH7q1/tRUF4njqpQqb0NGhmCa9IQQTn2xrgaZOPOp0dU7OVqR
uQOf318c8cG4smdecPqAo8uiAvH4IusHCB4MmPip4RiOIlH1Mq2qx9i6cRdJKpWl
BOmT3chP3EJ6tyzOgfKxegHJ+p8q4Ex3WYmyNHkuxXTi85zQuWQzcyVgY3kQE622
U1D0yqZghuXkOQY0KzAYCvEGJkoUYF1b8owhF4sjg5qHxby5wLBKZEAFvyU7I0kM
8EVTQqm4d8T7AavXFTEou4GGl2tpHyDeiiTeZvSleQ1Usgd0WJ6Doems4Uo1+E+T
CNcg3gPmhLHme9Z9GDV3jIcI+uBMN2Hvgjh3MO9nfQioRJUCE95oTSdHKqIPjfkI
3TdX04eyM7Ed4KHW/mfViByxd0v57zNXSpABasvNqN24CjDIIGFbM1GtKJyrHFCH
dLdyDMOhnTNnlArtXS/vTzhM0zEw622ru97QzLN65Ezg3D3ZsVapafxcJheaEUha
rdGptVTPY2GF8m2iqJ4KrVmnFVGm0XL4XijnW2Cco4LiVvn9NuvBUV4TP4aTsBtq
4bwSh20tQAjpGGgwSQ==
=Qedu
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a missing elf_hwcap, fix some stack unwinder bugs and two trivial
cleanups"
* tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Add generic ex-handler unwind in prologue unwinder
LoongArch: Strip guess unwinder out from prologue unwinder
LoongArch: Use correct sp value to get graph addr in stack unwinders
LoongArch: Get frame info in unwind_start() when regs is not available
LoongArch: Adjust PC value when unwind next frame in unwinder
LoongArch: Simplify larch_insn_gen_xxx implementation
LoongArch: Use common function sign_extend64()
LoongArch: Add HWCAP_LOONGARCH_CPUCFG to elf_hwcap
According to the DT bindings, the "max-bitrate" property is optional.
However, when it is not present, a warning is printed.
Fix this by adding a missing check for -EINVAL.
Fixes: a4a86d273ff1b6f7 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The compatible strings in the driver don't have the meson prefix.
Fix this in the documentation and rename the file accordingly.
Fixes: da86d286cce8 ("dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/8d960029-e94d-224b-911f-03e5deb47ebc@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The compatible string in the driver doesn't have the meson prefix.
Fix this in the documentation and rename the file accordingly.
Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/0a82be92-ce85-da34-9d6f-4b33034473e5@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix this by initializing rc to 0 as cache_refresh_path() would not set
it in case of success.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202301190004.bEHvbKG6-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Wa_18018764978 applies to specific steppings of DG2 (G10 C0+,
G11 and G12 A0+). Clean up style in function at the same time.
Bspec: 66622
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123183648.407058-1-matthew.s.atwood@intel.com
(cherry picked from commit 468a4e630c7da8cf586f85cc498d6097aed1ab4b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Terminate vdesc when terminating an ongoing transfer.
This will ensure that the vdesc is present in the desc_terminated list
The descriptor will be freed later in desc_free_list().
This fixes the memory leaks which can happen when terminating an
ongoing transfer.
Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Link: https://lore.kernel.org/r/20230118115801.15210-1-akhilrajeev@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
