commit cbe0d8d91415c9692fe88191940d98952b6855d9 upstream.
Currently, RCU Tasks Trace initializes the trc_n_readers_need_end counter
to the value one, increments it before each trc_read_check_handler()
IPI, then decrements it within trc_read_check_handler() if the target
task was in a quiescent state (or if the target task moved to some other
CPU while the IPI was in flight), complaining if the new value was zero.
The rationale for complaining is that the initial value of one must be
decremented away before zero can be reached, and this decrement has not
yet happened.
Except that trc_read_check_handler() is initiated with an asynchronous
smp_call_function_single(), which might be significantly delayed. This
can result in false-positive complaints about the counter reaching zero.
This commit therefore waits for in-flight IPI handlers to complete before
decrementing away the initial value of one from the trc_n_readers_need_end
counter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46aa886c483f57ef13cd5ea0a85e70b93eb1d381 upstream.
The trc_wait_for_one_reader() function is called at multiple stages
of trace rcu-tasks GP function, rcu_tasks_wait_gp():
- First, it is called as part of per task function -
rcu_tasks_trace_pertask(), for all non-idle tasks. As part of per task
processing, this function add the task in the holdout list and if the
task is currently running on a CPU, it sends IPI to the task's CPU.
The IPI handler takes action depending on whether task is in trace
rcu-tasks read side critical section or not:
- a. If the task is in trace rcu-tasks read side critical section
(t->trc_reader_nesting != 0), the IPI handler sets the task's
->trc_reader_special.b.need_qs, so that this task notifies exit
from its outermost read side critical section (by decrementing
trc_n_readers_need_end) to the GP handling function.
trc_wait_for_one_reader() also increments trc_n_readers_need_end,
so that the trace rcu-tasks GP handler function waits for this
task's read side exit notification. The IPI handler also sets
t->trc_reader_checked to true, and no further IPIs are sent for
this task, for this trace rcu-tasks grace period and this
task can be removed from holdout list.
- b. If the task is in the process of exiting its trace rcu-tasks
read side critical section, (t->trc_reader_nesting < 0), defer
this task's processing to future calls to trc_wait_for_one_reader().
- c. If task is not in rcu-task read side critical section,
t->trc_reader_nesting == 0, ->trc_reader_checked is set for this
task, so that this task is removed from holdout list.
- Second, trc_wait_for_one_reader() is called as part of post scan, in
function rcu_tasks_trace_postscan(), for all idle tasks.
- Third, in function check_all_holdout_tasks_trace(), this function is
called for each task in the holdout list, but only if there isn't
a pending IPI for the task (->trc_ipi_to_cpu == -1). This function
removed the task from holdout list, if IPI handler has completed the
required work, to ensure that the current trace rcu-tasks grace period
either waits for this task, or this task is not in a trace rcu-tasks
read side critical section.
Now, considering the scenario where smp_call_function_single() fails in
first case, inside rcu_tasks_trace_pertask(). In this case,
->trc_ipi_to_cpu is set to the current CPU for that task. This will
result in trc_wait_for_one_reader() getting skipped in third case,
inside check_all_holdout_tasks_trace(), for this task. This further
results in ->trc_reader_checked never getting set for this task,
and the task not getting removed from holdout list. This can cause
the current trace rcu-tasks grace period to stall.
Fix the above problem, by resetting ->trc_ipi_to_cpu to -1, on
smp_call_function_single() failure, so that future IPI calls can
be send for this task.
Note that all three of the trc_wait_for_one_reader() function's
callers (rcu_tasks_trace_pertask(), rcu_tasks_trace_postscan(),
check_all_holdout_tasks_trace()) hold cpu_read_lock(). This means
that smp_call_function_single() cannot race with CPU hotplug, and thus
should never fail. Therefore, also add a warning in order to report
any such failure in case smp_call_function_single() grows some other
reason for failure.
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 147f04b14adde831eb4a0a1e378667429732f9e8 upstream.
If an RCU expedited grace period starts just when a CPU is in the process
of going offline, so that the outgoing CPU has completed its pass through
stop-machine but has not yet completed its final dive into the idle loop,
RCU will attempt to enable that CPU's scheduling-clock tick via a call
to tick_dep_set_cpu(). For this to happen, that CPU has to have been
online when the expedited grace period completed its CPU-selection phase.
This is pointless: The outgoing CPU has interrupts disabled, so it cannot
take a scheduling-clock tick anyway. In addition, the tick_dep_set_cpu()
function's eventual call to irq_work_queue_on() will splat as follows:
smpboot: CPU 1 is now offline
WARNING: CPU: 6 PID: 124 at kernel/irq_work.c:95
+irq_work_queue_on+0x57/0x60
Modules linked in:
CPU: 6 PID: 124 Comm: kworker/6:2 Not tainted 5.15.0-rc1+ #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
+rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Workqueue: rcu_gp wait_rcu_exp_gp
RIP: 0010:irq_work_queue_on+0x57/0x60
Code: 8b 05 1d c7 ea 62 a9 00 00 f0 00 75 21 4c 89 ce 44 89 c7 e8
+9b 37 fa ff ba 01 00 00 00 89 d0 c3 4c 89 cf e8 3b ff ff ff eb ee <0f> 0b eb b7
+0f 0b eb db 90 48 c7 c0 98 2a 02 00 65 48 03 05 91
6f
RSP: 0000:ffffb12cc038fe48 EFLAGS: 00010282
RAX: 0000000000000001 RBX: 0000000000005208 RCX: 0000000000000020
RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9ad01f45a680
RBP: 000000000004c990 R08: 0000000000000001 R09: ffff9ad01f45a680
R10: ffffb12cc0317db0 R11: 0000000000000001 R12: 00000000fffecee8
R13: 0000000000000001 R14: 0000000000026980 R15: ffffffff9e53ae00
FS: 0000000000000000(0000) GS:ffff9ad01f580000(0000)
+knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000000de0c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
tick_nohz_dep_set_cpu+0x59/0x70
rcu_exp_wait_wake+0x54e/0x870
? sync_rcu_exp_select_cpus+0x1fc/0x390
process_one_work+0x1ef/0x3c0
? process_one_work+0x3c0/0x3c0
worker_thread+0x28/0x3c0
? process_one_work+0x3c0/0x3c0
kthread+0x115/0x140
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
---[ end trace c5bf75eb6aa80bc6 ]---
This commit therefore avoids invoking tick_dep_set_cpu() on offlined
CPUs to limit both futility and false-positive splats.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 619672bf2d04cdc1bc3925defd0312c2ef11e5d0 which is
commit 2d645604f69f3a772d58ead702f9a8e84ab2b342 upstream.
It breaks the build, so should be dropped.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/5b30ff73-46cb-1d1e-3823-f175dbfbd91b@roeck-us.net
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 04bd3a362d2f1788272776bd8b10e5a012e69b77 which is
commit 187916e6ed9d0c3b3abc27429f7a5f8c936bd1f0 upstream.
It is reported to cause lots of log spam, so it should be dropped for
now.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/27d08b24-3581-4451-b8db-5df144784d6a@roeck-us.net
Reported-by: From: Chia-I Wu <olvaffe@gmail.com>
Link: https://lore.kernel.org/r/CAPaKu7RTgAMBLHbwtp4zgiBSDrTFtAj07k5qMzkuLQy2Zr+sZA@mail.gmail.com
Cc: Christian König <christian.koenig@amd.com>
Cc: Lang Yu <Lang.Yu@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6846234f45801441f0e31a8b37f901ef0abd2df upstream.
Today module_frob_arch_sections() spots init sections from their
'init' prefix, and uses this to keep the init PLTs separate from the rest.
get_module_plt() uses within_module_init() to determine if a
location is in the init text or not, but this depends on whether
core code thought this was an init section.
Naturally the logic is different.
module_init_layout_section() groups the init and exit text together if
module unloading is disabled, as the exit code will never run. The result
is kernels with this configuration can't load all their modules because
there are not enough PLTs for the combined init+exit section.
A previous patch exposed module_init_layout_section(), use that so the
logic is the same.
Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f928f8b1a2496e7af95b860f9acf553f20f68f16 upstream.
Today module_frob_arch_sections() spots init sections from their
'init' prefix, and uses this to keep the init PLTs separate from the rest.
module_emit_plt_entry() uses within_module_init() to determine if a
location is in the init text or not, but this depends on whether
core code thought this was an init section.
Naturally the logic is different.
module_init_layout_section() groups the init and exit text together if
module unloading is disabled, as the exit code will never run. The result
is kernels with this configuration can't load all their modules because
there are not enough PLTs for the combined init+exit section.
This results in the following:
| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
| module_emit_plt_entry+0x184/0x1cc
| apply_relocate_add+0x2bc/0x8e4
| load_module+0xe34/0x1bd4
| init_module_from_file+0x84/0xc0
| __arm64_sys_finit_module+0x1b8/0x27c
| invoke_syscall.constprop.0+0x5c/0x104
| do_el0_svc+0x58/0x160
| el0_svc+0x38/0x110
| el0t_64_sync_handler+0xc0/0xc4
| el0t_64_sync+0x190/0x194
A previous patch exposed module_init_layout_section(), use that so the
logic is the same.
Reported-by: Adam Johnston <adam.johnston@arm.com>
Tested-by: Adam Johnston <adam.johnston@arm.com>
Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: <stable@vger.kernel.org> # 5.15.x: 60a0aab7463ee69 arm64: module-plts: inline linux/moduleloader.h
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 60a0aab7463ee69296692d980b96510ccce3934e upstream.
module_frob_arch_sections() is declared in moduleloader.h, but
that is not included before the definition:
arch/arm64/kernel/module-plts.c:286:5: error: no previous prototype for 'module_frob_arch_sections' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230516160642.523862-11-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2abcc4b5a64a65a2d2287ba0be5c2871c1552416 upstream.
module_init_layout_section() choses whether the core module loader
considers a section as init or not. This affects the placement of the
exit section when module unloading is disabled. This code will never run,
so it can be free()d once the module has been initialised.
arm and arm64 need to count the number of PLTs they need before applying
relocations based on the section name. The init PLTs are stored separately
so they can be free()d. arm and arm64 both use within_module_init() to
decide which list of PLTs to use when applying the relocation.
Because within_module_init()'s behaviour changes when module unloading
is disabled, both architecture would need to take this into account when
counting the PLTs.
Today neither architecture does this, meaning when module unloading is
disabled there are insufficient PLTs in the init section to load some
modules, resulting in warnings:
| WARNING: CPU: 2 PID: 51 at arch/arm64/kernel/module-plts.c:99 module_emit_plt_entry+0x184/0x1cc
| Modules linked in: crct10dif_common
| CPU: 2 PID: 51 Comm: modprobe Not tainted 6.5.0-rc4-yocto-standard-dirty #15208
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : module_emit_plt_entry+0x184/0x1cc
| lr : module_emit_plt_entry+0x94/0x1cc
| sp : ffffffc0803bba60
[...]
| Call trace:
| module_emit_plt_entry+0x184/0x1cc
| apply_relocate_add+0x2bc/0x8e4
| load_module+0xe34/0x1bd4
| init_module_from_file+0x84/0xc0
| __arm64_sys_finit_module+0x1b8/0x27c
| invoke_syscall.constprop.0+0x5c/0x104
| do_el0_svc+0x58/0x160
| el0_svc+0x38/0x110
| el0t_64_sync_handler+0xc0/0xc4
| el0t_64_sync+0x190/0x194
Instead of duplicating module_init_layout_section()s logic, expose it.
Reported-by: Adam Johnston <adam.johnston@arm.com>
Fixes: 055f23b74b20 ("module: check for exit sections in layout_sections() instead of module_init_section()")
Cc: stable@vger.kernel.org
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6696d2a6f38c0beedf03c381edfc392ecf7631b4 upstream.
Format %pG expects a lower case 'p' in order to print the flags.
Fix it.
Link: https://lkml.kernel.org/r/20210108085202.4506-1-osalvador@suse.de
Fixes: 8295d535e2aa ("mm,hwpoison: refactor get_any_page")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e2c1ab070fdc81010ec44634838d24fce9ff9e53 ]
When page_handle_poison() fails to handle the hugepage or free page in
retry path, soft_offline_page() will return 0 while -EBUSY is expected in
this case.
Consequently the user will think soft_offline_page succeeds while it in
fact failed. So the user will not try again later in this case.
Link: https://lkml.kernel.org/r/20230627112808.1275241-1-linmiaohe@huawei.com
Fixes: b94e02822deb ("mm,hwpoison: try to narrow window race for free pages")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dad4e5b390866ca902653df0daa864ae4b8d4147 ]
The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.
Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.
When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.
Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: e2c1ab070fdc ("mm: memory-failure: fix unexpected return value in soft_offline_page()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8295d535e2aa198bdf65a4045d622df38955ffe2 ]
Patch series "HWPoison: Refactor get page interface", v2.
This patch (of 3):
When we want to grab a refcount via get_any_page, we call __get_any_page
that calls get_hwpoison_page to get the actual refcount.
get_any_page() is only there because we have a sort of retry mechanism in
case the page we met is unknown to us or if we raced with an allocation.
Also __get_any_page() prints some messages about the page type in case the
page was a free page or the page type was unknown, but if anything, we
only need to print a message in case the pagetype was unknown, as that is
reporting an error down the chain.
Let us merge get_any_page() and __get_any_page(), and let the message be
printed in soft_offline_page. While we are it, we can also remove the
'pfn' parameter as it is no longer used.
Link: https://lkml.kernel.org/r/20201204102558.31607-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20201204102558.31607-2-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Acked-by: Vlastimil Babka <Vbabka@suse.cz>
Cc: Qian Cai <qcai@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: e2c1ab070fdc ("mm: memory-failure: fix unexpected return value in soft_offline_page()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e531fdb5cd5ee2564b7fe10c8a9219e2b2fac61e ]
If a signal callback releases the sw_sync fence, that will trigger a
deadlock as the timeline_fence_release recurses onto the fence->lock
(used both for signaling and the the timeline tree).
To avoid that, temporarily hold an extra reference to the signalled
fences until after we drop the lock.
(This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/
which avoids some potential UAF issues with the original patch.)
v2: Remove now obsolete comment, use list_move_tail() and
list_del_init()
Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: d3c6dd1fb30d ("dma-buf/sw_sync: Synchronize signal vs syncpt free")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818145939.39697-1-robdclark@gmail.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fcc1c40b747069644db6102c1d84c942c9d4d86 ]
The pinctrl group and function creation/remove calls expect
caller to take care of locking. Add lock around these functions.
Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2746f13f6f1df7999001d6595b16f789ecc28ad1 ]
The COMMON_CLK config is not enabled in some of the architectures.
This causes below build issues:
pwm-rz-mtu3.c:(.text+0x114):
undefined reference to `clk_rate_exclusive_put'
pwm-rz-mtu3.c:(.text+0x32c):
undefined reference to `clk_rate_exclusive_get'
Fix these issues by moving clk_rate_exclusive_{get,put} inside COMMON_CLK
code block, as clk.c is enabled by COMMON_CLK.
Fixes: 55e9b8b7b806 ("clk: add clk_rate_exclusive api")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202307251752.vLfmmhYm-lkp@intel.com/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230725175140.361479-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 60c5fd2e8f3c42a5abc565ba9876ead1da5ad2b7 upstream.
The raid_component_add() function was added to the kernel tree via patch
"[SCSI] embryonic RAID class" (2005). Remove this function since it never
has had any callers in the Linux kernel. And also raid_component_release()
is only used in raid_component_add(), so it is also removed.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bd3a76880b2bce017987cf53780b372cf59528e upstream.
Commit 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add()
fails") fixed the memory leak caused by dev_set_name() when device_add()
failed. However, it did not consider that 'tgt' has already been released
when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path
to avoid double free of 'tgt' and move put_device(&tgt->dev) after the
removed kfree(tgt) to avoid a use-after-free.
Fixes: 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add() fails")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230819083941.164365-1-wangzhu9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 683b0df26c3333a5c020a2764b71a70d082c1c61 upstream.
Some boards use different circuits for jack detection.
This patch adds two modes as below
1. JD2/2 ports/external resister 100k
2. JD2/1 port/JD voltage 1.8V
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210617090822.16960-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Philip Müller <philm@manjaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a337b64f0d5717248a0c894e2618e658e6a9de9f upstream.
Infinite waits for completion of GPU activity have been observed in CI,
mostly inside __i915_active_wait(), triggered by igt@gem_barrier_race or
igt@perf@stress-open-close. Root cause analysis, based of ftrace dumps
generated with a lot of extra trace_printk() calls added to the code,
revealed loops of request dependencies being accidentally built,
preventing the requests from being processed, each waiting for completion
of another one's activity.
After we substitute a new request for a last active one tracked on a
timeline, we set up a dependency of our new request to wait on completion
of current activity of that previous one. While doing that, we must take
care of keeping the old request still in memory until we use its
attributes for setting up that await dependency, or we can happen to set
up the await dependency on an unrelated request that already reuses the
memory previously allocated to the old one, already released. Combined
with perf adding consecutive kernel context remote requests to different
user context timelines, unresolvable loops of await dependencies can be
built, leading do infinite waits.
We obtain a pointer to the previous request to wait upon when we
substitute it with a pointer to our new request in an active tracker,
e.g. in intel_timeline.last_request. In some processing paths we protect
that old request from being freed before we use it by getting a reference
to it under RCU protection, but in others, e.g. __i915_request_commit()
-> __i915_request_add_to_timeline() -> __i915_request_ensure_ordering(),
we don't. But anyway, since the requests' memory is SLAB_FAILSAFE_BY_RCU,
that RCU protection is not sufficient against reuse of memory.
We could protect i915_request's memory from being prematurely reused by
calling its release function via call_rcu() and using rcu_read_lock()
consequently, as proposed in v1. However, that approach leads to
significant (up to 10 times) increase of SLAB utilization by i915_request
SLAB cache. Another potential approach is to take a reference to the
previous active fence.
When updating an active fence tracker, we first lock the new fence,
substitute a pointer of the current active fence with the new one, then we
lock the substituted fence. With this approach, there is a time window
after the substitution and before the lock when the request can be
concurrently released by an interrupt handler and its memory reused, then
we may happen to lock and return a new, unrelated request.
Always get a reference to the current active fence first, before
replacing it with a new one. Having it protected from premature release
and reuse, lock it and then replace with the new one but only if not
yet signalled via a potential concurrent interrupt nor replaced with
another one by a potential concurrent thread, otherwise retry, starting
from getting a reference to the new current one. Adjust users to not
get a reference to the previous active fence themselves and always put the
reference got by __i915_active_fence_set() when no longer needed.
v3: Fix lockdep splat reports and other issues caused by incorrect use of
try_cmpxchg() (use (cmpxchg() != prev) instead)
v2: Protect request's memory by getting a reference to it in favor of
delegating its release to call_rcu() (Chris)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8211
Fixes: df9f85d8582e ("drm/i915: Serialise i915_active_fence_set() with itself")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.6+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720093543.832147-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 946e047a3d88d46d15b5c5af0414098e12b243f7)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ef269ef1ac006acf974793d975539244d77b28f upstream.
cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks
have been checked. DL BW is not allocated per-task but as a sum over
all DL tasks migrating.
If multiple controllers are attached to the cgroup next to the cpuset
controller a non-cpuset can_attach() can fail. In this case free DL BW
in cpuset_cancel_attach().
Finally, update cpuset DL task count (nr_deadline_tasks) only in
cpuset_attach().
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Fix conflicts in kernel/cgroup/cpuset.c due to new code being applied
that is not applicable on this branch. Reject new code. ]
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85989106feb734437e2d598b639991b9185a43a6 upstream.
While moving a set of tasks between exclusive cpusets,
cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for
DL BW overflow checking and per-task DL BW allocation on the destination
root_domain for the DL tasks in this set.
This approach has the issue of not freeing already allocated DL BW in
the following error cases:
(1) The set of tasks includes multiple DL tasks and DL BW overflow
checking fails for one of the subsequent DL tasks.
(2) Another controller next to the cpuset controller which is attached
to the same cgroup fails in its can_attach().
To address this problem rework dl_cpu_busy():
(1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a
dedicated dl_bw_free().
(2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of
a `struct task_struct *p` used in dl_cpu_busy(). This allows to
allocate DL BW for a set of tasks too rather than only for a single
task.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0f78fd5edcf29b2822ac165f9248a6c165e8554 upstream.
update_tasks_root_domain currently iterates over all tasks even if no
DEADLINE task is present on the cpuset/root domain for which bandwidth
accounting is being rebuilt. This has been reported to introduce 10+ ms
delays on suspend-resume operations.
Skip the costly iteration for cpusets that don't contain DEADLINE tasks.
Reported-by: Qais Yousef (Google) <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c24849f5515e4966d94fa5279bdff4acf2e9489 upstream.
Qais reported that iterating over all tasks when rebuilding root domains
for finding out which ones are DEADLINE and need their bandwidth
correctly restored on such root domains can be a costly operation (10+
ms delays on suspend-resume).
To fix the problem keep track of the number of DEADLINE tasks belonging
to each cpuset and then use this information (followup patch) to only
perform the above iteration if DEADLINE tasks are actually present in
the cpuset for which a corresponding root domain is being rebuilt.
Reported-by: Qais Yousef (Google) <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Fix conflicts in kernel/cgroup/cpuset.c and kernel/sched/deadline.c
due to pulling new fields and functions. Remove new code and match the
patch diff. ]
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 111cd11bbc54850f24191c52ff217da88a5e639b upstream.
Turns out percpu_cpuset_rwsem - commit 1243dc518c9d ("cgroup/cpuset:
Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea,
as it has been reported to cause slowdowns in workloads that need to
change cpuset configuration frequently and it is also not implementing
priority inheritance (which causes troubles with realtime workloads).
Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it
only for SCHED_DEADLINE tasks (other policies don't care about stable
cpusets anyway).
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Fix conflict in kernel/cgroup/cpuset.c due to pulling new functions or
comment that don't exist on 5.10 or the usage of different cpu hotplug
lock whenever replacing the rwsem with mutex. Remove BUG_ON() for
rwsem that doesn't exist on mainline. ]
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad3a557daf6915296a43ef97a3e9c48e076c9dd8 upstream.
rebuild_root_domains() and update_tasks_root_domain() have neutral
names, but actually deal with DEADLINE bandwidth accounting.
Rename them to use 'dl_' prefix so that intent is more clear.
No functional change.
Suggested-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62c1256d544747b38e77ca9b5bfe3a26f9592576 upstream.
When tick_nohz_stop_tick() stops the tick and high resolution timers are
disabled, then the clock event device is not put into ONESHOT_STOPPED
mode. This can lead to spurious timer interrupts with some clock event
device drivers that don't shut down entirely after firing.
Eliminate these by putting the device into ONESHOT_STOPPED mode at points
where it is not being reprogrammed. When there are no timers active, then
tick_program_event() with KTIME_MAX can be used to stop the device. When
there is a timer active, the device can be stopped at the next tick (any
new timer added by timers will reprogram the tick).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220422141446.915024-1-npiggin@gmail.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1ff03cd6fb9c501fff63a4a2bface9adcfa81cd upstream.
On some rare cases, the timekeeper CPU may be delaying its jiffies
update duty for a while. Known causes include:
* The timekeeper is waiting on stop_machine in a MULTI_STOP_DISABLE_IRQ
or MULTI_STOP_RUN state. Disabled interrupts prevent from timekeeping
updates while waiting for the target CPU to complete its
stop_machine() callback.
* The timekeeper vcpu has VMEXIT'ed for a long while due to some overload
on the host.
Detect and fix these situations with emergency timekeeping catchups.
Original-patch-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d52d3a2bf408ff86f3a79560b5cce80efb340239 upstream.
During rcutorture shutdown, the rcu_torture_cleanup() function calls
torture_cleanup_begin(), which sets the fullstop global variable to
FULLSTOP_RMMOD. This causes the rcutorture threads for readers and
fakewriters to exit all of their "while" loops and start shutting down.
They then call torture_kthread_stopping(), which in turn waits for
kthread_stop() to be called. However, rcu_torture_cleanup() has
not yet called kthread_stop() on those threads, and before it gets a
chance to do so, multiple instances of torture_kthread_stopping() invoke
schedule_timeout_interruptible(1) in a tight loop. Tracing confirms that
TIMER_SOFTIRQ can then continuously execute timer callbacks. If that
TIMER_SOFTIRQ preempts the task executing rcu_torture_cleanup(), that
task might never invoke kthread_stop().
This commit improves this situation by increasing the timeout passed to
schedule_timeout_interruptible() from one jiffy to 1/20th of a second.
This change prevents TIMER_SOFTIRQ from monopolizing its CPU, thus
allowing rcu_torture_cleanup() to carry out the needed kthread_stop()
invocations. Testing has shown 100 runs of TREE07 passing reliably,
as oppose to the tens-of-percent failure rates seen beforehand.
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c66ca3949dc701da7f4c9407f2140ae425683a5 upstream.
0-Day found a 34.6% regression in stress-ng's 'af-alg' test case, and
bisected it to commit b81fac906a8f ("x86/fpu: Move FPU initialization into
arch_cpu_finalize_init()"), which optimizes the FPU init order, and moves
the CR4_OSXSAVE enabling into a later place:
arch_cpu_finalize_init
identify_boot_cpu
identify_cpu
generic_identify
get_cpu_cap --> setup cpu capability
...
fpu__init_cpu
fpu__init_cpu_xstate
cr4_set_bits(X86_CR4_OSXSAVE);
As the FPU is not yet initialized the CPU capability setup fails to set
X86_FEATURE_OSXSAVE. Many security module like 'camellia_aesni_avx_x86_64'
depend on this feature and therefore fail to load, causing the regression.
Cure this by setting X86_FEATURE_OSXSAVE feature right after OSXSAVE
enabling.
[ tglx: Moved it into the actual BSP FPU initialization code and added a comment ]
Fixes: b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/202307192135.203ac24e-oliver.sang@intel.com
Link: https://lore.kernel.org/lkml/20230823065747.92257-1-feng.tang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc22522fd55e257c86d340ae9aedc122e705a435 upstream.
40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources()
which depends on bridge being available, however enable_slot() can be
called without bridge associated:
1. Legitimate case of hotplug on root bus (widely used in virt world)
2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to
non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at
enable_slot(..., bridge = 0) where bus has no bridge assigned to it.
acpihp doesn't know that it's a bridge, and bus specific 'PCI
subsystem' can't augment ACPI context with bridge information since
the PCI device to get this data from is/was not available.
Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI
hotplug on hostbridge slots. To reproduce, boot kernel at commit
40613da52b13 in VM started with following CLI (assuming guest root fs is
installed on sda1 partition):
# qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \
-monitor stdio -serial file:serial.log \
-kernel arch/x86/boot/bzImage \
-append "root=/dev/sda1 console=ttyS0" \
guest_disk.img
Once guest OS is fully booted at qemu prompt:
(qemu) device_add e1000
(check serial.log) it will cause NULL pointer dereference at:
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
BUG: kernel NULL pointer dereference, address: 0000000000000018
? pci_assign_unassigned_bridge_resources+0x1f/0x260
enable_slot+0x21f/0x3e0
acpiphp_hotplug_notify+0x13d/0x260
acpi_device_hotplug+0xbc/0x540
acpi_hotplug_work_fn+0x15/0x20
process_one_work+0x1f7/0x370
worker_thread+0x45/0x3b0
The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following
sequence:
1. Suspend to RAM
2. Wake up with the same backtrace being observed:
3. 2nd suspend to RAM attempt makes laptop freeze
Fix it by using __pci_bus_assign_resources() instead of
pci_assign_unassigned_bridge_resources() as we used to do, but only in case
when bus doesn't have a bridge associated (to cover for the case of ACPI
event on hostbridge or non existing root port).
That lets us keep hotplug on root bus working like it used to and at the
same time keeps resource reassignment usable on root ports (and other 1st
level bridges) that was fixed by 40613da52b13.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7f2e65699e2290fd547ec12a17008764e5d9620 upstream.
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.
Fix this bug by checking *nplanes against the array size.
Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 914d9d831e6126a6e7a92e27fcfaa250671be42c upstream.
While originally it was fine to format strings using "%pOF" while
holding devtree_lock, this now causes a deadlock. Lockdep reports:
of_get_parent from of_fwnode_get_parent+0x18/0x24
^^^^^^^^^^^^^
of_fwnode_get_parent from fwnode_count_parents+0xc/0x28
fwnode_count_parents from fwnode_full_name_string+0x18/0xac
fwnode_full_name_string from device_node_string+0x1a0/0x404
device_node_string from pointer+0x3c0/0x534
pointer from vsnprintf+0x248/0x36c
vsnprintf from vprintk_store+0x130/0x3b4
Fix this by moving the printing in __of_changeset_entry_apply() outside
the lock. As the only difference in the multiple prints is the action
name, use the existing "action_names" to refactor the prints into a
single print.
Fixes: a92eb7621b9fb2c2 ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d59070d1076ec5114edb67c87658aeb1d691d381 upstream.
Recent versions of clang warn about an unused variable, though older
versions saw the 'slot++' as a use and did not warn:
radix-tree.c:1136:50: error: parameter 'slot' set but not used [-Werror,-Wunused-but-set-parameter]
It's clearly not needed any more, so just remove it.
Link: https://lkml.kernel.org/r/20230811131023.2226509-1-arnd@kernel.org
Fixes: 3a08cd52c37c7 ("radix tree: Remove multiorder support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Rong Tao <rongtao@cestc.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 382d4cd1847517ffcb1800fd462b625db7b2ebea upstream.
The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.
But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.
This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.
This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:
a) Some architectures have assembly instructions to count the bits and
which are used instead of calling __clzdi2(), e.g. on x86 the bsr
instruction and on ppc cntlz is used. On such architectures the
wrong __clzdi2() implementation isn't used and as such the bug has
no effect and won't be noticed.
b) Some architectures link to libgcc.a, and the in-kernel weak
functions get replaced by the correct 64-bit variants from libgcc.a.
c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
places in the kernel, and most likely only in uncritical functions,
e.g. when printing hex values via seq_put_hex_ll(). The wrong return
value will still print the correct number, but just in a wrong
formatting (e.g. with too many leading zeroes).
d) 32-bit kernels aren't used that much any longer, so they are less
tested.
A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:
Here the kernel uses a correct implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
00010000-00019000 r-xp 00000000 08:05 787324 /usr/bin/cat
00019000-0001a000 rwxp 00009000 08:05 787324 /usr/bin/cat
0001a000-0003b000 rwxp 00000000 00:00 0 [heap]
f7551000-f770d000 r-xp 00000000 08:05 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
and this kernel uses the broken implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324 /usr/bin/cat
0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324 /usr/bin/cat
000000001a000-000000003b000 rwxp 00000000 00:00 0 [heap]
00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7b6a22 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 987aae75fc1041072941ffb622b45ce2359a99b9 upstream.
The automatic recalculation of the maximum allowed MTU is usually triggered
by code sections which are already rtnl lock protected by callers outside
of batman-adv. But when the fragmentation setting is changed via
batman-adv's own batadv genl family, then the rtnl lock is not yet taken.
But dev_set_mtu requires that the caller holds the rtnl lock because it
uses netdevice notifiers. And this code will then fail the check for this
lock:
RTNL: assertion failed at net/core/dev.c (1953)
Cc: stable@vger.kernel.org
Reported-by: syzbot+f8812454d9b3ac00d282@syzkaller.appspotmail.com
Fixes: c6a953cce8d0 ("batman-adv: Trigger events for auto adjusted MTU")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821-batadv-missing-mtu-rtnl-lock-v1-1-1c5a7bfe861e@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d25ddb7e788d34cf27ff1738d11a87cb4b67d446 upstream.
When a client roamed back to a node before it got time to destroy the
pending local entry (i.e. within the same originator interval) the old
global one is directly removed from hash table and left as such.
But because this entry had an extra reference taken at lookup (i.e using
batadv_tt_global_hash_find) there is no way its memory will be reclaimed
at any time causing the following memory leak:
unreferenced object 0xffff0000073c8000 (size 18560):
comm "softirq", pid 0, jiffies 4294907738 (age 228.644s)
hex dump (first 32 bytes):
06 31 ac 12 c7 7a 05 00 01 00 00 00 00 00 00 00 .1...z..........
2c ad be 08 00 80 ff ff 6c b6 be 08 00 80 ff ff ,.......l.......
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<000000000ff2fdbc>] batadv_tt_global_add+0x700/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
unreferenced object 0xffff00000bae1a80 (size 56):
comm "softirq", pid 0, jiffies 4294910888 (age 216.092s)
hex dump (first 32 bytes):
00 78 b1 0b 00 00 ff ff 0d 50 00 00 00 00 00 00 .x.......P......
00 00 00 00 00 00 00 00 50 c8 3c 07 00 00 ff ff ........P.<.....
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<00000000d9aaa49e>] batadv_tt_global_add+0x53c/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
Releasing the extra reference from batadv_tt_global_hash_find even at
roam back when batadv_tt_global_free is called fixes this memory leak.
Cc: stable@vger.kernel.org
Fixes: 068ee6e204e1 ("batman-adv: roaming handling mechanism redesign")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by; Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8e42a2b0addf238be8b3b37dcd9795a5c1be459 upstream.
If the user set an MTU value, it usually means that there are special
requirements for the MTU. But if an interface gots activated, the MTU was
always recalculated and then the user set value was overwritten.
The only reason why this user set value has to be overwritten, is when the
MTU has to be decreased because batman-adv is not able to transfer packets
with the user specified size.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6a953cce8d0438391e6da48c8d0793d3fbfcfa6 upstream.
If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU
and NETDEV_CHANGEMTU notification events is triggered. This worked fine for
.ndo_change_mtu based changes because core networking code took care of it.
But for auto-adjustments after hard-interfaces changes, these events were
simply missing.
Due to this problem, non-batman-adv components weren't aware of MTU changes
and thus couldn't perform their own tasks correctly.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70d91dc9b2ac91327d0eefd86163abc3548effa6 upstream.
Set the next pointer in filename_trans_read_helper() before attaching
the new node under construction to the list, otherwise garbage would be
dereferenced on subsequent failure during cleanup in the out goto label.
Cc: <stable@vger.kernel.org>
Fixes: 430059024389 ("selinux: implement new format of filename transitions")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b816601e279756e781e6c4d9b3f3bd21a72ac67 upstream.
We have some reports of linux NFS clients that cannot satisfy a linux knfsd
server that always sets SEQ4_STATUS_RECALLABLE_STATE_REVOKED even though
those clients repeatedly walk all their known state using TEST_STATEID and
receive NFS4_OK for all.
Its possible for revoke_delegation() to set NFS4_REVOKED_DELEG_STID, then
nfsd4_free_stateid() finds the delegation and returns NFS4_OK to
FREE_STATEID. Afterward, revoke_delegation() moves the same delegation to
cl_revoked. This would produce the observed client/server effect.
Fix this by ensuring that the setting of sc_type to NFS4_REVOKED_DELEG_STID
and move to cl_revoked happens within the same cl_lock. This will allow
nfsd4_free_stateid() to properly remove the delegation from cl_revoked.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2217103
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2176575
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v4.17+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be2fd1560eb57b7298aa3c258ddcca0d53ecdea3 upstream.
Be more careful when tearing down the subrequests of an O_DIRECT write
as part of a retransmission.
Reported-by: Chris Mason <clm@fb.com>
Fixes: ed5d588fe47f ("NFS: Try to join page groups before an O_DIRECT retransmission")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
