Now that ipa_power_suspend_handler() is a trivial wrapper around
ipa_interrupt_suspend_clear_all(), we can open-code it in the one
place it's used, and get rid of the function.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch makes ipa_interrupt_suspend_clear_all() static,
calling it only within "ipa_interrupt.c". Move its definition
higher in the file so no declaration is needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IPA_POWER_FLAG_RESUMED was originally used to avoid calling
pm_wakeup_dev_event() more than once when handling a SUSPEND
interrupt. This call is no longer made, so there' no need for the
flag, so get rid of it.
That leaves no more IPA power flags usefully defined, so just get
rid of the bitmap in the IPA power structure and the definition of
the ipa_power_flag enumerated type.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SYSTEM IPA power flag is set, cleared, and tested. But nothing
happens based on its value when tested, so it serves no purpose.
Get rid of this flag.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IPA interrupt can fire if there is data to be delivered to a GSI
channel that is suspended. This condition occurs in three scenarios.
First, runtime power management automatically suspends the IPA
hardware after half a second of inactivity. This has nothing
to do with system suspend, so a SYSTEM IPA power flag is used to
avoid calling pm_wakeup_dev_event() when runtime suspended.
Second, if the system is suspended, the receipt of an IPA interrupt
should trigger a system resume. Configuring the IPA interrupt for
wakeup accomplishes this.
Finally, if system suspend is underway and the IPA interrupt fires,
we currently call pm_wakeup_dev_event() to abort the system suspend.
The IPA driver correctly handles quiescing the hardware before
suspending it, so there's really no need to abort a suspend in
progress in the third case. We can simply quiesce and suspend
things, and be done.
Incoming data can still wake the system after it's suspended.
The IPA interrupt has wakeup mode enabled, so if it fires *after*
we've suspended, it will trigger a wakeup (if not disabled via
sysfs).
Stop calling pm_wakeup_dev_event() to abort a system suspend in
progress in ipa_power_suspend_handler().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify the function, no functional change intended.
- Remove not needed variable unsupp, I think code is even better
readable now.
- Move setting phydev->eee_enabled out of the if clause
- Simplify return value handling
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/442277c7-7431-4542-80b5-1d3d691714d7@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
mptcp: various small improvements
This series brings various small improvements to MPTCP and its
selftests:
Patch 1 prints an error if there are duplicated subtests names. It is
important to have unique (sub)tests names in TAP, because some CI
environments drop (sub)tests with duplicated names.
Patch 2 is a preparation for patches 3 and 4, which check the protocol
in tcp_sk() and mptcp_sk() with DEBUG_NET, only in code from net/mptcp/.
We recently had the case where an MPTCP socket was wrongly treated as a
TCP one, and fuzzers and static checkers never spot the issue. This
would prevent such issues in the future.
Patches 5 to 7 are some cleanup for the MPTCP selftests. These patches
are not supposed to change the behaviour.
Patch 8 sets the poll timeout in diag selftest to the same value as the
one used in the other selftests.
====================
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-0-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even if it is set to 100ms from the beginning with commit
df62f2ec3d ("selftests/mptcp: add diag interface tests"), there is
no reason not to have it to 30ms like all the other tests. "diag.sh" is
not supposed to be slower than the other ones.
To maintain consistency with other scripts, this patch changes it to 30.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-8-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To maintain consistency with other scripts, this patch changes vars
'capture' and 'checksum' as bool vars in mptcp_join.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-7-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variables 'large', 'small', 'sout', 'cout', 'capout' and 'size' are
used in multiple functions, so they should be clearly defined as global
variables at the top of the file.
This patch redefines them at the beginning of simult_flows.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-6-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable 'ret' are defined twice in pm_netlink.sh. This patch drops
this duplicate one that has been defined from the beginning, with
commit eedbc68532 ("selftests: add PM netlink functional tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-5-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fuzzers and static checkers might not detect when mptcp_sk() is used
with a non mptcp_sock structure.
This is similar to the parent commit, where it is easy to use mptcp_sk()
with a TCP sock, e.g. with a subflow sk.
So a new simple check is done when CONFIG_DEBUG_NET is enabled to tell
kernel devs when a non-MPTCP socket is being used as an MPTCP one.
'mptcp_sk()' macro is then defined differently: with an extra WARN to
complain when an unexpected socket is being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-4-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fuzzers and static checkers might not detect when tcp_sk() is used with
a non tcp_sock structure.
This kind of mistake already happened a few times with MPTCP: when
wrongly using TCP-specific helpers with mptcp_sock pointers. On the
other hand, there are many 'tcp_xxx()' helpers that are taking a 'struct
sock' pointer as arguments, and some of them are only looking at fields
from 'struct sock', and nothing from 'struct tcp_sock'. It is then
tempting to use them with a 'struct mptcp_sock'.
So a new simple check is done when CONFIG_DEBUG_NET is enabled to tell
kernel devs when a non-TCP socket is being used as a TCP one. 'tcp_sk()'
macro is then re-defined to add a WARN when an unexpected socket is
being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-3-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As it would be done when initiating an MPTCP sock.
This is not strictly needed for this test, but it will be when a later
patch will check if the right protocol is being used when calling
mptcp_sk().
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-2-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
When adding a new subtest entry, an error message is printed in case of
duplicated entries. If there were duplicated entries and if all features
were expected to work, the script exits with an error at the end, after
having printed all subtests in the TAP format. Thanks to that, the MPTCP
CI will catch such issues early.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-1-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct ifacaddr6 are already freed after RCU grace period.
Add __rcu qualifier to aca_next pointer, and idev->ac_list
Add relevant rcu_assign_pointer() and dereference accessors.
ipv6_chk_acast_dev() no longer needs to acquire idev->lock.
/proc/net/anycast6 is now purely RCU protected, it no
longer acquires idev->lock.
Similarly in6_dump_addrs() can use RCU protection to iterate
through anycast addresses. It was relying on a mixture of RCU
and RTNL but next patches will get rid of RTNL there.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223201054.220534-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not set rtnl_link_stats64 fields to zero, since they are zeroed
before ops->ndo_get_stats64 is called in core dev_get_stats() function.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240223115839.3572852-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the vsockmon driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20240223115839.3572852-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Serge Semin says:
====================
net: pcs: xpcs: Cleanups before adding MMIO dev support
As stated in the subject this series is a short prequel before submitting
the main patches adding the memory-mapped DW XPCS support to the DW XPCS
and DW *MAC (STMMAC) drivers. Originally it was a part of the bigger
patchset (see the changelog v2 link below) but was detached to a
preparation set to shrink down the main series thus simplifying it'
review.
The patchset' content is straightforward: drop the redundant sentinel
entry and the header files; return EINVAL errno from the soft-reset method
and make sure that the interface validation method return EINVAL straight
away if the requested interface isn't supported by the XPCS device
instance. All of these changes are required to simplify the changes being
introduced a bit later in the framework of the memory-mapped DW XPCS
support patches.
Link: https://lore.kernel.org/netdev/20231205103559.9605-1-fancer.lancer@gmail.com
Changelog v2:
- Move the preparation patches to a separate series.
- Simplify the commit messages (@Russell, @Vladimir).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If an unsupported interface is passed to the PCS validation callback there
is no need in further link-modes calculations since the resultant array
will be initialized with zeros which will be perceived by the phylink
subsystem as error anyway (see phylink_validate_mac_and_pcs()). Instead
let's explicitly return the -EINVAL error to inform the caller about the
unsupported interface as it's done in the rest of the pcs_validate
callbacks.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In particular the xpcs_soft_reset() and xpcs_do_config() functions
currently return -1 if invalid auto-negotiation mode is specified. That
value might be then passed to the generic kernel subsystems which require
a standard kernel errno value. Even though the erroneous conditions are
very specific (memory corruption or buggy driver implementation) using a
hard-coded -1 literal doesn't seem correct anyway especially when it comes
to passing it higher to the network subsystem or printing to the system
log. Convert the hard-coded error values to -EINVAL then.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is nothing CM workqueue-related in the driver. So the respective
include directive can be dropped.
While at it add an empty line delimiter between the generic and local path
include directives to visually separate them.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are currently only two methods (xpcs_find_compat() and
xpcs_get_interfaces()) defined in the driver which loop over the available
interfaces. All of them rely on the xpcs_compat::num_interfaces field
value to get the total number of supported interfaces. Thus the interface
arrays are supposed to be filled with actual interface IDs and there is no
need in the dummy terminating ID placed at the end of the arrays.
Based on the above drop the PHY_INTERFACE_MODE_MAX entry from the
xpcs_2500basex_interfaces array and the PHY_INTERFACE_MODE_MAX-based
conditional statement from the xpcs_get_interfaces() method as redundant.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
rtnetlink: reduce RTNL pressure for dumps
This series restarts the conversion of rtnl dump operations
to RCU protection, instead of requiring RTNL.
In this new attempt (prior one failed in 2011), I chose to
allow a gradual conversion of selected operations.
After this series, "ip -6 addr" and "ip -4 ro" no longer
need to acquire RTNL.
I refrained from changing inet_dump_ifaddr() and inet6_dump_addr()
to avoid merge conflicts because of two fixes in net tree.
I also started the work for "ip link" future conversion.
v2: rtnl_fill_link_ifmap() always emit IFLA_MAP (Jiri Pirko)
Added "nexthop: allow nexthop_mpath_fill_node()
to be called without RTNL" to avoid a lockdep splat (Ido Schimmel)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
dev->name_node items are already rcu protected.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use READ_ONCE() to read the following device fields:
dev->mem_start
dev->mem_end
dev->base_addr
dev->irq
dev->dma
dev->if_port
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling inet_dump_fib().
Also change return value for a completed dump:
Returning 0 instead of skb->len allows NLMSG_DONE
to be appended to the skb. User space does not have
to call us again to get a standalone NLMSG_DONE marker.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nexthop_mpath_fill_node() will be potentially called
from contexts holding rcu_lock instead of RTNL.
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/all/ZdZDWVdjMaQkXBgW@shredder/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new field into struct fib_dump_filter, to let callers
tell if they use RTNL locking or RCU.
This is used in the following patch, when inet_dump_fib()
no longer holds RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No longer hold RTNL while calling inet6_dump_ifinfo()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag
allows dump operations registered via rtnl_register()
or rtnl_register_module() to opt-out from RTNL protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit af65bdfce9 ("[NETLINK]: Switch cb_lock spinlock
to mutex and allow to override it"), Patrick McHardy used
a common mutex to protect both nlk->cb and the dump() operations.
The override is used for rtnl dumps, registered with
rntl_register() and rntl_register_module().
We want to be able to opt-out some dump() operations
to not acquire RTNL, so we need to protect nlk->cb
with a per socket mutex.
This patch renames nlk->cb_def_mutex to nlk->nl_cb_mutex
The optional pointer to the mutex used to protect dump()
call is stored in nlk->dump_cb_mutex
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__netlink_dump_start() releases nlk->cb_mutex right before
calling netlink_dump() which grabs it again.
This seems dangerous, even if KASAN did not bother yet.
Add a @lock_taken parameter to netlink_dump() to let it
grab the mutex if called from netlink_recvmsg() only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__netlink_diag_dump() returns 1 if the dump is not complete,
zero if no error occurred.
If err variable is zero, this means the dump is complete:
We should not return skb->len in this case, but 0.
This allows NLMSG_DONE to be appended to the skb.
User space does not have to call us again only to get NLMSG_DONE.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare inet6_dump_ifinfo() to run with RCU protection
instead of RTNL and use for_each_netdev_dump() interface.
Also properly return 0 at the end of a dump, avoiding
an extra recvmsg() system call and RTNL acquisition.
Note that RTNL-less dumps need core changes, coming later
in the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to use RCU protection instead of RTNL
for inet6_fill_ifinfo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to no longer hold RTNL while calling inet6_fill_ifla6_attrs()
in the future. Add needed READ_ONCE()/WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to be able to run rtnl_fill_ifinfo() under RCU protection
instead of RTNL in the future.
This patch prepares dev_get_iflink() and nla_put_iflink()
to run either with RTNL or RCU held.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jérémie Dautheribes says:
====================
Add support for TI DP83826 configuration
This short patch series introduces the possibility of overriding
some parameters which are latched by default by hardware straps on the
TI DP83826 PHY.
The settings that can be overridden include:
- Configuring the PHY in either MII mode or RMII mode.
- When in RMII mode, configuring the PHY in RMII slave mode or RMII
master mode.
The RMII master/slave mode is TI-specific and determines whether the PHY
operates from a 25MHz reference clock (master mode) or from a 50MHz
reference clock (slave mode).
While these features should be supported by all the TI DP8382x family,
I have only been able to test them on TI DP83826 hardware. Therefore,
support has been added specifically for this PHY in this patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The TI DP83826 PHY can operate between two RMII modes:
- master mode (PHY operates from a 25MHz clock reference)
- slave mode (PHY operates from a 50MHz clock reference)
By default, the operation mode is configured by hardware straps.
Add support to configure the operation mode from within the driver.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TI DP83826 PHY can operate in either MII mode or RMII mode.
By default, it is configured by straps.
It can also be configured by writing to the bit 5 of register 0x17 - RMII
and Status Register (RCSR).
When phydev->interface is rmii, rmii mode must be enabled, otherwise
mii mode must be set.
This prevents misconfiguration of hw straps.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add property ti,rmii-mode to support selecting the RMII operation mode
between:
- master mode (PHY operates from a 25MHz clock reference)
- slave mode (PHY operates from a 50MHz clock reference)
If not set, the operation mode is configured by hardware straps.
Signed-off-by: Jérémie Dautheribes <jeremie.dautheribes@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement bridge port isolation for KSZ switches. Enabling the isolation
of switch ports from each other while maintaining connectivity with the
CPU and other forwarding ports. For instance, to isolate swp1 and swp2
from each other, use the following commands:
- bridge link set dev swp1 isolated on
- bridge link set dev swp2 isolated on
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink and ethtool have a trailing _ in the header guard. I must have
copy/pasted it into new guards, assuming it's a headers_install artifact.
This fixes build if system headers are old.
Fixes: 8f109e91b8 ("tools: ynl: include dpll and mptcp_pm in C codegen")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240222234831.179181-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the local variable in GENL_REQ_ATTR_CHECK() const.
genl_info_dump() returns a const pointer, so the macro
is currently hard to use in genl dumps.
Link: https://lore.kernel.org/r/20240222222819.156320-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Pirko says:
====================
tools: ynl: couple of cmdline enhancements
This is part of the original "netlink: specs: devlink: add the rest of
missing attribute definitions" set which was rejected [1]. These three
patches enhances the cmdline user comfort, allowing to pass flag
attribute with bool values and enum names instead of scalars.
[1] https://lore.kernel.org/all/20240220181004.639af931@kernel.org/
====================
Link: https://lore.kernel.org/r/20240222134351.224704-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During decoding of messages coming from kernel, attribute values are
converted to enum names in case the attribute type is enum of bitfield32.
However, when user constructs json message, he has to pass plain scalar
values. See "state" "selector" and "value" attributes in following
examples:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": 1}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": 1, "value": 1 }}}'
Allow user to pass strings containing enum names, convert them to scalar
values to be encoded into Netlink message:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml --do pin-set --json '{"id": 0, "parent-device": {"parent-id": 0, "state": "connected"}}'
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml --do port-set --json '{"bus-name": "pci", "dev-name": "0000:08:00.1", "port-index": 98304, "port-function": {"caps": {"selector": ["roce-bit"], "value": ["roce-bit"] }}}'
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-4-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a preparation to handle enums for scalar values, unify the processing
of all scalar types in a single elif statement.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240222134351.224704-3-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The flag attr presence in Netlink message indicates value "true",
if it is missing in the message it means "false".
Allow user to specify attrname with value "true"/"false"
in json for flag attrs, treat "false" value properly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240222134351.224704-2-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
