A syzkaller reproducer found a race while attempting to remove dquot
information from the rb tree.
Fetching the rb_tree root node must also be protected by the
dqopt->dqio_sem, otherwise, giving the right timing, shmem_release_dquot()
will trigger a warning because it couldn't find a node in the tree, when
the real reason was the root node changing before the search starts:
Thread 1 Thread 2
- shmem_release_dquot() - shmem_{acquire,release}_dquot()
- fetch ROOT - Fetch ROOT
- acquire dqio_sem
- wait dqio_sem
- do something, triger a tree rebalance
- release dqio_sem
- acquire dqio_sem
- start searching for the node, but
from the wrong location, missing
the node, and triggering a warning.
Link: https://lkml.kernel.org/r/20240320124011.398847-1-cem@kernel.org
Fixes: eafc474e2029 ("shmem: prepare shmem quota infrastructure")
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reported-by: Ubisectech Sirius <bugreport@ubisectech.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The sigbus-wp test requires the UFFD_FEATURE_WP_HUGETLBFS_SHMEM flag for
shmem and hugetlb targets. Otherwise it is not backwards compatible with
kernels <5.19 and fails with EINVAL.
Link: https://lkml.kernel.org/r/20240321232023.2064975-1-edliaw@google.com
Fixes: 73c1ea939b65 ("selftests/mm: move uffd sig/events tests into uffd unit tests")
Signed-off-by: Edward Liaw <edliaw@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Peter Xu <peterx@redhat.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On v5 and lower CPUs we can't provide MDWE protection, so ensure we fail
any attempt to enable it via prctl(PR_SET_MDWE).
Previously such an attempt would misleadingly succeed, leading to any
subsequent mmap(PROT_READ|PROT_WRITE) or execve() failing unconditionally
(the latter somewhat violently via force_fatal_sig(SIGSEGV) due to
READ_IMPLIES_EXEC).
Link: https://lkml.kernel.org/r/20240227013546.15769-6-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: <stable@vger.kernel.org> [6.3+]
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sam James <sam@gentoo.org>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "ARM: prctl: Reject PR_SET_MDWE where not supported".
I noticed after a recent kernel update that my ARM926 system started
segfaulting on any execve() after calling prctl(PR_SET_MDWE). After some
investigation it appears that ARMv5 is incapable of providing the
appropriate protections for MDWE, since any readable memory is also
implicitly executable.
The prctl_set_mdwe() function already had some special-case logic added
disabling it on PARISC (commit 793838138c15, "prctl: Disable
prctl(PR_SET_MDWE) on parisc"); this patch series (1) generalizes that
check to use an arch_*() function, and (2) adds a corresponding override
for ARM to disable MDWE on pre-ARMv6 CPUs.
With the series applied, prctl(PR_SET_MDWE) is rejected on ARMv5 and
subsequent execve() calls (as well as mmap(PROT_READ|PROT_WRITE)) can
succeed instead of unconditionally failing; on ARMv6 the prctl works as it
did previously.
[0] https://lore.kernel.org/all/2023112456-linked-nape-bf19@gregkh/
This patch (of 2):
There exist systems other than PARISC where MDWE may not be feasible to
support; rather than cluttering up the generic code with additional
arch-specific logic let's add a generic function for checking MDWE support
and allow each arch to override it as needed.
Link: https://lkml.kernel.org/r/20240227013546.15769-4-zev@bewilderbeest.net
Link: https://lkml.kernel.org/r/20240227013546.15769-5-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sam James <sam@gentoo.org>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The dm-devel@lists.linux.dev mailing list should only be listed under the
L: (List) tag in the MAINTAINERS file. However, it was incorrectly listed
under both L: and M: (Maintainers) tags, which is not accurate. Remove
the M: tag for dm-devel@lists.linux.dev in the MAINTAINERS file to reflect
the correct categorization.
Link: https://lkml.kernel.org/r/20240319181842.249547-1-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Matthew Sakai <msakai@redhat.com>
Cc: Michael Sclafani <dm-devel@lists.linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The atexit() is called from parent process as well as forked processes.
Hence the child restores the settings at exit while the parent is still
executing. Fix this by checking pid of atexit() calling process and only
restore THP number from parent process.
Link: https://lkml.kernel.org/r/20240314094045.157149-1-usama.anjum@collabora.com
Fixes: c23ea61726d5 ("selftests/mm: protection_keys: save/restore nr_hugepages settings")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The tools/cgroup directory no longer contains a Makefile. This patch
updates the top-level tools/Makefile to remove references to building and
installing cgroup components. This change reflects the current structure
of the tools directory and fixes the build failure when building tools in
the top-level directory.
linux/tools$ make cgroup
DESCEND cgroup
make[1]: *** No targets specified and no makefile found. Stop.
make: *** [Makefile:73: cgroup] Error 2
Link: https://lkml.kernel.org/r/20240315012249.439639-1-liucong2@kylinos.cn
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When cachestat on shmem races with swapping and invalidation, there
are two possible bugs:
1) A swapin error can have resulted in a poisoned swap entry in the
shmem inode's xarray. Calling get_shadow_from_swap_cache() on it
will result in an out-of-bounds access to swapper_spaces[].
Validate the entry with non_swap_entry() before going further.
2) When we find a valid swap entry in the shmem's inode, the shadow
entry in the swapcache might not exist yet: swap IO is still in
progress and we're before __remove_mapping; swapin, invalidation,
or swapoff have removed the shadow from swapcache after we saw the
shmem swap entry.
This will send a NULL to workingset_test_recent(). The latter
purely operates on pointer bits, so it won't crash - node 0, memcg
ID 0, eviction timestamp 0, etc. are all valid inputs - but it's a
bogus test. In theory that could result in a false "recently
evicted" count.
Such a false positive wouldn't be the end of the world. But for
code clarity and (future) robustness, be explicit about this case.
Bail on get_shadow_from_swap_cache() returning NULL.
Link: https://lkml.kernel.org/r/20240315095556.GC581298@cmpxchg.org
Fixes: cf264e1329fb ("cachestat: implement cachestat syscall")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Chengming Zhou <chengming.zhou@linux.dev> [Bug #1]
Reported-by: Jann Horn <jannh@google.com> [Bug #2]
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org> [v6.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On a 104 thread, 2 socket Skylake system, Intel report a 4.7% performance
reduction with will-it-scale page_fault2. This was due to reducing the
size of the batch from 32 to 15. Increasing the folio batch size from 15
to 31 gives a performance increase of 12.5% relative to the original, or
17.2% relative to the reduced performance commit.
The penalty of this commit is an additional 128 bytes of stack usage. Six
folio_batches are also allocated from percpu memory in cpu_fbatches so
that will be an additional 768 bytes of percpu memory (per CPU). Tim Chen
originally submitted a patch like this in 2020:
https://lore.kernel.org/linux-mm/d1cc9f12a8ad6c2a52cb600d93b06b064f2bbc57.1593205965.git.tim.c.chen@linux.intel.com/
Link: https://lkml.kernel.org/r/20240315140823.2478146-1-willy@infradead.org
Fixes: 99fbb6bfc16f ("mm: make folios_put() the basis of release_pages()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403151058.7048f6a8-oliver.sang@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prior to 217b2119b9e2 ("mm,page_owner: implement the tracking of the
stacks count") the only place where page_owner could potentially go into
recursion due to its need of allocating more memory was in save_stack(),
which ends up calling into stackdepot code with the possibility of
allocating memory.
We made sure to guard against that by signaling that the current task was
already in page_owner code, so in case a recursion attempt was made, we
could catch that and return dummy_handle.
After above commit, a new place in page_owner code was introduced where we
could allocate memory, meaning we could go into recursion would we take
that path.
Make sure to signal that we are in page_owner in that codepath as well.
Move the guard code into two helpers {un}set_current_in_page_owner() and
use them prior to calling in the two functions that might allocate memory.
Link: https://lkml.kernel.org/r/20240315222610.6870-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Fixes: 217b2119b9e2 ("mm,page_owner: implement the tracking of the stacks count")
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Put my personal email first because NXP employment ended some time ago.
Also add my old intel email address.
Link: https://lkml.kernel.org/r/f568faa0-2380-4e93-a312-b80c1e367645@gmail.com
Signed-off-by: Leonard Crestez <cdleonard@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If initrd data is larger than 2Gb, we'll eventually fail to write to the
/initrd.image file when we hit that limit, unless O_LARGEFILE is set.
Link: https://lkml.kernel.org/r/20240317221522.896040-1-jsperbeck@google.com
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add missing flags argument to open(2) call with O_CREAT.
Some tests fail to compile if _FORTIFY_SOURCE is defined (to any valid
value) (together with -O), resulting in similar error messages such as:
In file included from /usr/include/fcntl.h:342,
from gup_test.c:1:
In function 'open',
inlined from 'main' at gup_test.c:206:10:
/usr/include/bits/fcntl2.h:50:11: error: call to '__open_missing_mode' declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
50 | __open_missing_mode ();
| ^~~~~~~~~~~~~~~~~~~~~~
_FORTIFY_SOURCE is enabled by default in some distributions, so the
tests are not built by default and are skipped.
open(2) man-page warns about missing flags argument: "if it is not
supplied, some arbitrary bytes from the stack will be applied as the
file mode."
Link: https://lkml.kernel.org/r/20240318023445.3192922-1-vt@altlinux.org
Fixes: aeb85ed4f41a ("tools/testing/selftests/vm/gup_benchmark.c: allow user specified file")
Fixes: fbe37501b252 ("mm: huge_memory: debugfs for file-backed THP split")
Fixes: c942f5bd17b3 ("selftests: soft-dirty: add test for mprotect")
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 0cf18e839f64 of large folio zap work broke uffd-wp. Now mm's uffd
unit test "wp-unpopulated" will trigger this WARN_ON_ONCE().
The WARN_ON_ONCE() asserts that an VMA cannot be registered with
userfaultfd-wp if it contains a !normal page, but it's actually possible.
One example is an anonymous vma, register with uffd-wp, read anything will
install a zero page. Then when zap on it, this should trigger.
What's more, removing that WARN_ON_ONCE may not be enough either, because
we should also not rely on "whether it's a normal page" to decide whether
pte marker is needed. For example, one can register wr-protect over some
DAX regions to track writes when UFFD_FEATURE_WP_ASYNC enabled, in which
case it can have page==NULL for a devmap but we may want to keep the
marker around.
Link: https://lkml.kernel.org/r/20240313213107.235067-1-peterx@redhat.com
Fixes: 0cf18e839f64 ("mm/memory: handle !page case in zap_present_pte() separately")
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=7UMV
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Prevent scheduling in an atomic context when printk() takes over the
console flushing duty
* tag 'printk-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Update @console_may_schedule in console_trylock_spinning()
This contains a single fix for a regression introduced in v5.18-rc1
which made the img pwm driver fail to bind.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmYCf3sACgkQj4D7WH0S
/k59xggAn8fUj0xLQ3ho+rhH0uJkoTJlIYYQCX5CDkE5VM/a0JbyVd8q2oH708Z9
KOKcWixUG6gGm8RXTlA1Hn6xpKnjUCSpC/37BcqtnTBhp5rqq2HHukZ331yFFOGw
mf63QElYTFnWh3TzfVMJOa/tzVeJQ2nzPpm28VoJEl9lWZs845VwUaKCMtZJ6cpd
gP6STcDJkUsY1jinN4nMQfS9iBalzvaHNVUMGPwxbnvVvexM/qjOULiSUmc7dKKY
K7WPwFp3yNT4GtRaJFwV6sAJQ/R86XQOwYHBGnutUY5u0eOp2PGjYnFHTfl0hxth
KTR5PpveQpx7v2EdYLGn2/WrNcvS8A==
=Hq7u
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"This contains a single fix for a regression introduced in v5.18-rc1
which made the img pwm driver fail to bind"
* tag 'pwm/for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: img: fix pwm clock lookup
There are reports from tree-checker that detects corrupted nodes,
without any obvious pattern so possibly an overwrite in memory.
After some debugging it turns out there's a race when reading an extent
buffer the uptodate status can be missed.
To prevent concurrent reads for the same extent buffer,
read_extent_buffer_pages() performs these checks:
/* (1) */
if (test_bit(EXTENT_BUFFER_UPTODATE, &eb->bflags))
return 0;
/* (2) */
if (test_and_set_bit(EXTENT_BUFFER_READING, &eb->bflags))
goto done;
At this point, it seems safe to start the actual read operation. Once
that completes, end_bbio_meta_read() does
/* (3) */
set_extent_buffer_uptodate(eb);
/* (4) */
clear_bit(EXTENT_BUFFER_READING, &eb->bflags);
Normally, this is enough to ensure only one read happens, and all other
callers wait for it to finish before returning. Unfortunately, there is
a racey interleaving:
Thread A | Thread B | Thread C
---------+----------+---------
(1) | |
| (1) |
(2) | |
(3) | |
(4) | |
| (2) |
| | (1)
When this happens, thread B kicks of an unnecessary read. Worse, thread
C will see UPTODATE set and return immediately, while the read from
thread B is still in progress. This race could result in tree-checker
errors like this as the extent buffer is concurrently modified:
BTRFS critical (device dm-0): corrupted node, root=256
block=8550954455682405139 owner mismatch, have 11858205567642294356
expect [256, 18446744073709551360]
Fix it by testing UPTODATE again after setting the READING bit, and if
it's been set, skip the unnecessary read.
Fixes: d7172f52e993 ("btrfs: use per-buffer locking for extent_buffer reading")
Link: https://lore.kernel.org/linux-btrfs/CAHk-=whNdMaN9ntZ47XRKP6DBes2E5w7fi-0U3H2+PS18p+Pzw@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/f51a6d5d7432455a6a858d51b49ecac183e0bbc9.1706312914.git.wqu@suse.com/
Link: https://lore.kernel.org/linux-btrfs/c7241ea4-fcc6-48d2-98c8-b5ea790d6c89@gmx.com/
CC: stable@vger.kernel.org # 6.5+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor update of changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
When attempting to exclusive open a device which has no exclusive open
permission, such as a physical device associated with the flakey dm
device, the open operation will fail, resulting in a mount failure.
In this particular scenario, we erroneously return -EINVAL instead of the
correct error code provided by the bdev_open_by_path() function, which is
-EBUSY.
Fix this, by returning error code from the bdev_open_by_path() function.
With this correction, the mount error message will align with that of
ext4 and xfs.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit f4a9f219411f ("btrfs: do not delete unused block group if it may be
used soon") changed the behaviour of deleting unused block-groups on zoned
filesystems. Starting with this commit, we're using
btrfs_space_info_used() to calculate the number of used bytes in a
space_info. But btrfs_space_info_used() also accounts
btrfs_space_info::bytes_zone_unusable as used bytes.
So if a block group is 100% zone_unusable it is skipped from the deletion
step.
In order not to skip fully zone_unusable block-groups, also check if the
block-group has bytes left that can be used on a zoned filesystem.
Fixes: f4a9f219411f ("btrfs: do not delete unused block group if it may be used soon")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_add_extent_mapping(), if we failed to merge the extent map, which
is unexpected and theoretically should never happen, we use WARN_ONCE() to
log a message which is not great because we don't get information about
which filesystem it relates to in case we have multiple btrfs filesystems
mounted. So change this to use btrfs_warn() and surround the error check
with WARN_ON() so we always get a useful stack trace and the condition is
flagged as "unlikely" since it's not expected to ever happen.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_add_extent_mapping(), if we are unable to merge the existing
extent map, we print a warning message that suggests interval ranges in
the form "[X, Y)", where the first element is the inclusive start offset
of a range and the second element is the exclusive end offset. However
we end up printing the length of the ranges instead of the exclusive end
offsets. So fix this by printing the range end offsets.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At unpin_extent_range() we print warning messages that are supposed to
print an interval in the form "[X, Y)", with the first element being an
inclusive start offset and the second element being the exclusive end
offset of a range. However we end up printing the range's length instead
of the range's exclusive end offset, so fix that to avoid having confusing
and non-sense messages in case we hit one of these unexpected scenarios.
Fixes: 00deaf04df35 ("btrfs: log messages at unpin_extent_range() during unexpected cases")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At unpin_extent_cache() if we happen to find an extent map with an
unexpected start offset, we jump to the 'out' label and never release the
reference we added to the extent map through the call to
lookup_extent_mapping(), therefore resulting in a leak. So fix this by
moving the free_extent_map() under the 'out' label.
Fixes: c03c89f821e5 ("btrfs: handle errors returned from unpin_extent_cache()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Boris managed to create a device capable of changing its maj:min without
altering its device path.
Only multi-devices can be scanned. A device that gets scanned and remains
in the btrfs kernel cache might end up with an incorrect maj:min.
Despite the temp-fsid feature patch did not introduce this bug, it could
lead to issues if the above multi-device is converted to a single device
with a stale maj:min. Subsequently, attempting to mount the same device
with the correct maj:min might mistake it for another device with the same
fsid, potentially resulting in wrongly auto-enabling the temp-fsid feature.
To address this, this patch validates the device's maj:min at the time of
device open and updates it if it has changed since the last scan.
CC: stable@vger.kernel.org # 6.7+
Fixes: a5b8a5f9f835 ("btrfs: support cloned-device mount capability")
Reported-by: Boris Burkov <boris@bur.io>
Co-developed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Boris Burkov <boris@bur.io>#
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Shinichiro reported the following use-after-free triggered by the device
replace operation in fstests btrfs/070.
BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0
==================================================================
BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs]
Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007
CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1
Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0x200/0x3e0
kasan_report+0xd8/0x110
? do_zone_finish+0x91a/0xb90 [btrfs]
? do_zone_finish+0x91a/0xb90 [btrfs]
do_zone_finish+0x91a/0xb90 [btrfs]
btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs]
? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs]
? btrfs_put_root+0x2d/0x220 [btrfs]
? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs]
cleaner_kthread+0x21e/0x380 [btrfs]
? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
kthread+0x2e3/0x3c0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Allocated by task 3493983:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
btrfs_alloc_device+0xb3/0x4e0 [btrfs]
device_list_add.constprop.0+0x993/0x1630 [btrfs]
btrfs_scan_one_device+0x219/0x3d0 [btrfs]
btrfs_control_ioctl+0x26e/0x310 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 3494056:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3f/0x60
poison_slab_object+0x102/0x170
__kasan_slab_free+0x32/0x70
kfree+0x11b/0x320
btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs]
btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs]
btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs]
btrfs_ioctl+0xb27/0x57d0 [btrfs]
__x64_sys_ioctl+0x134/0x1b0
do_syscall_64+0x99/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
The buggy address belongs to the object at ffff8881543c8000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 96 bytes inside of
freed 1024-byte region [ffff8881543c8000, ffff8881543c8400)
The buggy address belongs to the physical page:
page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8
head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
This UAF happens because we're accessing stale zone information of a
already removed btrfs_device in do_zone_finish().
The sequence of events is as follows:
btrfs_dev_replace_start
btrfs_scrub_dev
btrfs_dev_replace_finishing
btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced
btrfs_rm_dev_replace_free_srcdev
btrfs_free_device <-- device freed
cleaner_kthread
btrfs_delete_unused_bgs
btrfs_zone_finish
do_zone_finish <-- refers the freed device
The reason for this is that we're using a cached pointer to the chunk_map
from the block group, but on device replace this cached pointer can
contain stale device entries.
The staleness comes from the fact, that btrfs_block_group::physical_map is
not a pointer to a btrfs_chunk_map but a memory copy of it.
Also take the fs_info::dev_replace::rwsem to prevent
btrfs_dev_replace_update_device_in_mapping_tree() from changing the device
underneath us again.
Note: btrfs_dev_replace_update_device_in_mapping_tree() is holding
fs_info::mapping_tree_lock, but as this is a spinning read/write lock we
cannot take it as the call to blkdev_zone_mgmt() requires a memory
allocation which may not sleep.
But btrfs_dev_replace_update_device_in_mapping_tree() is always called with
the fs_info::dev_replace::rwsem held in write mode.
Many thanks to Shinichiro for analyzing the bug.
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
CC: stable@vger.kernel.org # 6.8
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, loopback test may be skipped when resetting, but the test
result will still show as 'PASS', because the driver doesn't set
ETH_TEST_FL_FAILED flag. Fix it by setting the flag and
initializating the value to UNEXECUTED.
Fixes: 4c8dab1c709c ("net: hns3: reconstruct function hns3_self_test")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash. This patch fixes this by taking devl_lock during initialization.
Fixes: b741269b2759 ("net: hns3: add support for registering devlink for PF")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, hns hardware supports more than 512 queues and the index limit
in hclge_comm_tqps_update_stats is wrong. So this patch removes it.
Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZgHmTAAKCRDbK58LschI
g1gWAP9HjAWE/Sy0B2t9opIiTqRzdMJLYs2B4OFeHRI6+qQg0gD6A4jsKEh/xmtG
Hhjw+AElJRFZ3SUIT4mZlljzUHIYYAA=
=T0lM
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-25
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 12 day(s) which contain
a total of 19 files changed, 184 insertions(+), 61 deletions(-).
The main changes are:
1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling
found via test_bpf module, from Puranjay Mohan.
2) Various fixups to the BPF arena code in particular in the BPF verifier and
around BPF selftests to match latest corresponding LLVM implementation,
from Puranjay Mohan and Alexei Starovoitov.
3) Fix xsk to not assume that metadata is always requested in TX completion,
from Stanislav Fomichev.
4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv
ABI which requires sign-extension on int/uint, from Pu Lehui.
5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when
testing struct_ops, from Ilya Leoshkevich.
6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on
32-bit architectures, from Andrii Nakryiko.
7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo.
8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which
resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov.
9) Fix BPF man page build script to use silent mode, from Hangbin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi
bpf: verifier: reject addr_space_cast insn without arena
selftests/bpf: verifier_arena: fix mmap address for arm64
bpf: verifier: fix addr_space_cast from as(1) to as(0)
libbpf: Define MFD_CLOEXEC if not available
arm64: bpf: fix 32bit unconditional bswap
bpf, arm64: fix bug in BPF_LDX_MEMSX
libbpf: fix u64-to-pointer cast on 32-bit arches
s390/bpf: Fix bpf_plt pointer arithmetic
xsk: Don't assume metadata is always requested in TX completion
selftests/bpf: Add arena test case for 4Gbyte corner case
selftests/bpf: Remove hard coded PAGE_SIZE macro.
libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM
bpf: Clarify bpf_arena comments.
MAINTAINERS: Update email address for Quentin Monnet
scripts/bpf_doc: Use silent mode when exec make cmd
bpf: Temporarily disable atomic operations in BPF arena
====================
Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Locally generated IP multicast packets (such as the ones used in the
test) do not perform routing and simply egress the bound device.
However, as explained in commit 8bcfb4ae4d97 ("selftests: forwarding:
Fix failing tests with old libnet"), old versions of libnet (used by
mausezahn) do not use the "SO_BINDTODEVICE" socket option. Specifically,
the library started using the option for IPv6 sockets in version 1.1.6
and for IPv4 sockets in version 1.2. This explains why on Ubuntu - which
uses version 1.1.6 - the IPv4 overlay tests are failing whereas the IPv6
ones are passing.
Fix by specifying the source and destination MAC of the packets which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 62199e3f1658 ("selftests: net: Add VXLAN MDB test")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/netdev/5bb50349-196d-4892-8ed2-f37543aa863f@alu.unizg.hr/
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240325075030.2379513-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since the Renesas Ethernet Switch driver was added by Yoshihiro Shimoda,
I started receiving the patches to review for it -- which I was unable to
do, as I don't know this hardware and don't even have the manuals for it.
Fortunately, Shimoda-san has volunteered to be a reviewer for this new
driver, thus let's now split the single entry into 3 per-driver entries,
each with its own reviewer...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/de0ccc1d-6fc0-583f-4f80-f70e6461d62d@omp.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MT7530 switch after reset initialises with a core clock frequency that
works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock
frequency must be set to 500MHz.
The mt7530_pll_setup() function is responsible of setting the core clock
frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This
causes MT7530 switch with 25MHz XTAL to egress and ingress frames
improperly.
Introduce a check to run it only on MT7530 with 40MHz XTAL.
The core clock frequency is set by writing to a switch PHY's register.
Access to the PHY's register is done via the MDIO bus the switch is also
on. Therefore, it works only when the switch makes switch PHYs listen on
the MDIO bus the switch is on. This is controlled either by the state of
the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the
modifiable trap register.
When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means
accessing PHY registers via the PHY indirect access control register of the
switch.
When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means
accessing PHY registers via the MDIO bus the switch is on.
For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high,
the core clock frequency won't be set to 500MHz, causing the switch to
egress and ingress frames improperly.
Run mt7530_pll_setup() after PHY direct access is set on the modifiable
trap register.
With these two changes, all MT7530 switches with 25MHz and 40MHz, and
P1_LED_1 pulled high or low, will egress and ingress frames properly.
Link: 4a5dd143f2/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c (L1039)
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We had various syzbot reports about tcp timers firing after
the corresponding netns has been dismantled.
Fortunately Josef Bacik could trigger the issue more often,
and could test a patch I wrote two years ago.
When TCP sockets are closed, we call inet_csk_clear_xmit_timers()
to 'stop' the timers.
inet_csk_clear_xmit_timers() can be called from any context,
including when socket lock is held.
This is the reason it uses sk_stop_timer(), aka del_timer().
This means that ongoing timers might finish much later.
For user sockets, this is fine because each running timer
holds a reference on the socket, and the user socket holds
a reference on the netns.
For kernel sockets, we risk that the netns is freed before
timer can complete, because kernel sockets do not hold
reference on the netns.
This patch adds inet_csk_clear_xmit_timers_sync() function
that using sk_stop_timer_sync() to make sure all timers
are terminated before the kernel socket is released.
Modules using kernel sockets close them in their netns exit()
handler.
Also add sock_not_owned_by_me() helper to get LOCKDEP
support : inet_csk_clear_xmit_timers_sync() must not be called
while socket lock is held.
It is very possible we can revert in the future commit
3a58f13a881e ("net: rds: acquire refcount on TCP sockets")
which attempted to solve the issue in rds only.
(net/smc/af_smc.c and net/mptcp/subflow.c have similar code)
We probably can remove the check_net() tests from
tcp_out_of_resources() and __tcp_close() in the future.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Closes: https://lore.kernel.org/netdev/20240314210740.GA2823176@perftesting/
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Fixes: 8a68173691f0 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket")
Link: https://lore.kernel.org/bpf/CANn89i+484ffqb93aQm1N-tjxxvb3WDKX0EbD7318RwRgsatjw@mail.gmail.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Josef Bacik <josef@toxicpanda.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20240322135732.1535772-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit e748d0fd66ab ("net: hsr: Disable promiscuous mode in
offload mode") disables promiscuous mode of slave devices
while creating an HSR interface. But while deleting the
HSR interface, it does not take care of it. It decreases the
promiscuous mode count, which eventually enables promiscuous
mode on the slave devices when creating HSR interface again.
Fix this by not decrementing the promiscuous mode count while
deleting the HSR interface when offload is enabled.
Fixes: e748d0fd66ab ("net: hsr: Disable promiscuous mode in offload mode")
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240322100447.27615-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function platform_get_resource was replaced with
devm_platform_ioremap_resource_byname and is called using 0 as name.
This eventually ends up in platform_get_resource_byname in the call
stack, where it causes a null pointer in strcmp.
if (type == resource_type(r) && !strcmp(r->name, name))
It should have been replaced with devm_platform_ioremap_resource.
Fixes: bd69058f50d5 ("net: ll_temac: Use devm_platform_ioremap_resource_byname()")
Signed-off-by: Claus Hansen Ries <chr@terma.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/cca18f9c630a41c18487729770b492bb@terma.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IO subsystem expects a driver to retry a ccw_device_start, when the
subsequent interrupt response block (irb) contains a deferred
condition code 1.
Symptoms before this commit:
On the read channel we always trigger the next read anyhow, so no
different behaviour here.
On the write channel we may experience timeout errors, because the
expected reply will never be received without the retry.
Other callers of qeth_send_control_data() may wrongly assume that the ccw
was successful, which may cause problems later.
Note that since
commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
and
commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start")
deferred CC1s are much more likely to occur. See the commit message of the
latter for more background information.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Co-developed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/20240321115337.3564694-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We encountered a failing case when running selftest in no_alu32 mode:
The failure case is `kfunc_call/kfunc_call_test4` and its source code is
like bellow:
```
long bpf_kfunc_call_test4(signed char a, short b, int c, long d) __ksym;
int kfunc_call_test4(struct __sk_buff *skb)
{
...
tmp = bpf_kfunc_call_test4(-3, -30, -200, -1000);
...
}
```
And its corresponding asm code is:
```
0: r1 = -3
1: r2 = -30
2: r3 = 0xffffff38 # opcode: 18 03 00 00 38 ff ff ff 00 00 00 00 00 00 00 00
4: r4 = -1000
5: call bpf_kfunc_call_test4
```
insn 2 is parsed to ld_imm64 insn to emit 0x00000000ffffff38 imm, and
converted to int type and then send to bpf_kfunc_call_test4. But since
it is zero-extended in the bpf calling convention, riscv jit will
directly treat it as an unsigned 32-bit int value, and then fails with
the message "actual 4294966063 != expected -1234".
The reason is the incompatibility between bpf and riscv abi, that is,
bpf will do zero-extension on uint, but riscv64 requires sign-extension
on int or uint. We can solve this problem by sign extending the 32-bit
parameters in kfunc.
The issue is related to [0], and thanks to Yonghong and Alexei.
Link: https://github.com/llvm/llvm-project/pull/84874 [0]
Fixes: d40c3847b485 ("riscv, bpf: Add kfunc support for RV64")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240324103306.2202954-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
zero in iaa.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmX9buQACgkQxycdCkmx
i6dw1w/+IiwZX9A62NLDEBJbaXavQEHqoI1mhXq4Zwqeor5DhUlUGbmAhdZ5bg88
oA60zjroLgt+Wke3phXFMjavSdwyLMd8zkDU3BjhqHAD6ASZz4ml51MCi48ROKB8
lKSSAvjJX3VAHlYSxctUB/KWfzZZaGGUWQdtkC/90Tqp6OGeVyBbQCiQPyF4I55P
e1B8ADY5Ey2d+Rgos1whMuLkKa077yoWdiDgX5PFjfGalRdNh4jNsojrCSx6AEiI
KijWUtaGBNj9Exc04NeCa0JQNff4vynhn21ygMbgPMEMTde0SlHHdf6FWKrZcm6h
JlNYYVGXjcobMC62dQdTosTLxuAqSd4kr5UaiCjO52QdM8txfBJCm/PDARS2z9Gl
xROvBpOfRSn0Z8GpuHaBMNot4DlKv6y/puwmef6o3qYlUJH+CnuHUFaLOHRYVt6d
B0tWi7PWyx2jorj0VHUCpqiGGYlbUq6lWhGYt8XzPHeQ2ZewzH6EbbF5qKpEWGiB
3X8Dxl1PpO8sSwOQRabBpoWoXxJLL6G9uvyJCjJeftL9ZDEeTBDvdA9qis7t7kR5
Ckv4q/5rOq4MK3NsXsL6lJZY7ckQavLhCoZlRU9kcQt3MG06i6KUDoo83L/49rUL
zq5adU8sI3lP/2VplfA0XEeYFuLlBWH4TwNAmwJBRoWFiG8j8XM=
=Mau0
-----END PGP SIGNATURE-----
Merge tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that broke iwd as well as a divide by zero in
iaa"
* tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: iaa - Fix nr_cpus < nr_iaa case
Revert "crypto: pkcs7 - remove sha1 support"
The initial igc Tx timestamping implementation used only one register for
retrieving Tx timestamps. Commit 3ed247e78911 ("igc: Add support for
multiple in-flight TX timestamps") added support for utilizing all four of
them e.g., for multiple domain support. Remove the stale comment/FIXME.
Fixes: 3ed247e78911 ("igc: Add support for multiple in-flight TX timestamps")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change kzalloc() flags used in ixgbe_ipsec_vf_add_sa() to GFP_ATOMIC, to
avoid sleeping in IRQ context.
Dan Carpenter, with the help of Smatch, has found following issue:
The patch eda0333ac293: "ixgbe: add VF IPsec management" from Aug 13,
2018 (linux-next), leads to the following Smatch static checker
warning: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c:917 ixgbe_ipsec_vf_add_sa()
warn: sleeping in IRQ context
The call tree that Smatch is worried about is:
ixgbe_msix_other() <- IRQ handler
-> ixgbe_msg_task()
-> ixgbe_rcv_msg_from_vf()
-> ixgbe_ipsec_vf_add_sa()
Fixes: eda0333ac293 ("ixgbe: add VF IPsec management")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/intel-wired-lan/db31a0b0-4d9f-4e6b-aed8-88266eb5665c@moroto.mountain
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice driver would previously panic after suspend. This is caused
from the driver *only* calling the ice_vsi_free_q_vectors() function by
itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent
NULL pointer deref during reload") the driver has zeroed out
num_q_vectors, and only restored it in ice_vsi_cfg_def().
This further causes the ice_rebuild() function to allocate a zero length
buffer, after which num_q_vectors is updated, and then the new value of
num_q_vectors is used to index into the zero length buffer, which
corrupts memory.
The fix entails making sure all the code referencing num_q_vectors only
does so after it has been reset via ice_vsi_cfg_def().
I didn't perform a full bisect, but I was able to test against 6.1.77
kernel and that ice driver works fine for suspend/resume with no panic,
so sometime since then, this problem was introduced.
Also clean up an un-needed init of a local variable in the function
being modified.
PANIC from 6.8.0-rc1:
[1026674.915596] PM: suspend exit
[1026675.664697] ice 0000:17:00.1: PTP reset successful
[1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time
[1026675.667660] ice 0000:b1:00.0: PTP reset successful
[1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time
[1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None
[1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010
[1026677.192753] ice 0000:17:00.0: PTP reset successful
[1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time
[1026677.197928] #PF: supervisor read access in kernel mode
[1026677.197933] #PF: error_code(0x0000) - not-present page
[1026677.197937] PGD 1557a7067 P4D 0
[1026677.212133] ice 0000:b1:00.1: PTP reset successful
[1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time
[1026677.212575]
[1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI
[1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1
[1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022
[1026677.269367] Workqueue: ice ice_service_task [ice]
[1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice]
[1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6
[1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202
[1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000
[1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828
[1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010
[1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0
[1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000
[1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0
[1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1026677.381952] PKRU: 55555554
[1026677.385116] Call Trace:
[1026677.388023] <TASK>
[1026677.390589] ? __die+0x20/0x70
[1026677.394105] ? page_fault_oops+0x82/0x160
[1026677.398576] ? do_user_addr_fault+0x65/0x6a0
[1026677.403307] ? exc_page_fault+0x6a/0x150
[1026677.407694] ? asm_exc_page_fault+0x22/0x30
[1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice]
[1026677.418614] ice_vsi_rebuild+0x34b/0x3c0 [ice]
[1026677.423583] ice_vsi_rebuild_by_type+0x76/0x180 [ice]
[1026677.429147] ice_rebuild+0x18b/0x520 [ice]
[1026677.433746] ? delay_tsc+0x8f/0xc0
[1026677.437630] ice_do_reset+0xa3/0x190 [ice]
[1026677.442231] ice_service_task+0x26/0x440 [ice]
[1026677.447180] process_one_work+0x174/0x340
[1026677.451669] worker_thread+0x27e/0x390
[1026677.455890] ? __pfx_worker_thread+0x10/0x10
[1026677.460627] kthread+0xee/0x120
[1026677.464235] ? __pfx_kthread+0x10/0x10
[1026677.468445] ret_from_fork+0x2d/0x50
[1026677.472476] ? __pfx_kthread+0x10/0x10
[1026677.476671] ret_from_fork_asm+0x1b/0x30
[1026677.481050] </TASK>
Fixes: b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload")
Reported-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
According to the datasheet, the recipe association data is an 8-byte
little-endian value. It is described as 'Bitmap of the recipe indexes
associated with this profile', it is from 24 to 31 byte area in FW.
Therefore, it is defined to '__le64 recipe_assoc' in struct
ice_aqc_recipe_to_profile. And then fix the bitmap casting issue, as we
must never ever use castings for bitmap type.
Fixes: 1e0f9881ef79 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steven Zou <steven.zou@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
