commit 35d91d95a0 upstream.
This fixes the following code style problem:
ERROR: that open brace { should be on the previous line
+ if (!bacmp(&hdev->bdaddr, &ev->bdaddr))
+ {
Fixes: 1ffc6f8cc3 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92d4abd66f upstream.
When the vhci device is opened in the two-step way, i.e.: open device
then write a vendor packet with requested controller type, the device
shall respond with a vendor packet which includes HCI index of created
interface.
When the virtual HCI is created, the host sends a reset request to the
controller. This request is processed by the vhci_send_frame() function.
However, this request is send by a different thread, so it might happen
that this HCI request will be received before the vendor response is
queued in the read queue. This results in the HCI vendor response and
HCI reset request inversion in the read queue which leads to improper
behavior of btvirt:
> dmesg
[1754256.640122] Bluetooth: MGMT ver 1.22
[1754263.023806] Bluetooth: MGMT ver 1.22
[1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110
In order to synchronize vhci two-step open/setup process with virtual
HCI initialization, this patch adds internal lock when queuing data in
the vhci_send_frame() function.
Signed-off-by: Arkadiusz Bokowy <arkadiusz.bokowy@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7f59461f5 upstream.
Syzbot reports a warning as follows:
WARNING: CPU: 1 PID: 26946 at net/bluetooth/hci_conn.c:619
hci_conn_timeout+0x122/0x210 net/bluetooth/hci_conn.c:619
...
Call Trace:
<TASK>
process_one_work+0x884/0x15c0 kernel/workqueue.c:2630
process_scheduled_works kernel/workqueue.c:2703 [inline]
worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
</TASK>
It is because the HCI_EV_SIMPLE_PAIR_COMPLETE event handler drops
hci_conn directly without check Simple Pairing whether be enabled. But
the Simple Pairing process can only be used if both sides have the
support enabled in the host stack.
Add hci_conn_ssp_enabled() for hci_conn in HCI_EV_IO_CAPA_REQUEST and
HCI_EV_SIMPLE_PAIR_COMPLETE event handlers to fix the problem.
Fixes: 0493684ed2 ("[Bluetooth] Disable disconnect timer during Simple Pairing")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ffc6f8cc3 upstream.
This change is used to relieve CVE-2020-26555. The description of
the CVE:
Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]
The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]
It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.
A condition of this attack is that attacker should change the
BR_ADDR of his hacking device (Host B) to equal to the BR_ADDR with
the target device being attacked (Host A).
Thus, we reject the connection with device which has same BD_ADDR
both on HCI_Create_Connection and HCI_Connection_Request to prevent
the attack. A similar implementation also shows in btstack project.
[3][4]
Cc: stable@vger.kernel.org
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1]
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3523 [3]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L7297 [4]
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33155c4aae upstream.
This change is used to relieve CVE-2020-26555. The description of the
CVE:
Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification
1.0B through 5.2 may permit an unauthenticated nearby device to spoof
the BD_ADDR of the peer device to complete pairing without knowledge
of the PIN. [1]
The detail of this attack is in IEEE paper:
BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols
[2]
It's a reflection attack. The paper mentioned that attacker can induce
the attacked target to generate null link key (zero key) without PIN
code. In BR/EDR, the key generation is actually handled in the controller
which is below HCI.
Thus, we can ignore null link key in the handler of "Link Key Notification
event" to relieve the attack. A similar implementation also shows in
btstack project. [3]
v3: Drop the connection when null link key be detected.
v2:
- Used Link: tag instead of Closes:
- Used bt_dev_dbg instead of BT_DBG
- Added Fixes: tag
Cc: stable@vger.kernel.org
Fixes: 55ed8ca10f ("Bluetooth: Implement link key handling for the management interface")
Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1]
Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2]
Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3722 [3]
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb6254df09 upstream.
If system has two speakers and one connect to 0x14 pin, use this
function will disable it.
Fixes: e43252db7e ("ALSA: hda/realtek - ALC287 I2S speaker platform support")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/e3f2aac3fe6a47079d728a6443358cc2@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 32db510708 ]
Before commit b36a5780cb ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().
In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:
none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0
which results in broken output of the mount utility:
none on /mnt type overlay (rw,relatime,lowerdir=l)
Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.
Fixes: b36a5780cb ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a535116d80 ]
ovl_permission() accesses ->layers[...].mnt; we can't have ->layers
freed without an RCU delay on fs shutdown.
Fortunately, kern_unmount_array() that is used to drop those mounts
does include an RCU delay, so freeing is delayed; unfortunately, the
array passed to kern_unmount_array() is formed by mangling ->layers
contents and that happens without any delays.
The ->layers[...].name string entries are used to store the strings to
display in "lowerdir=..." by ovl_show_options(). Those entries are not
accessed in RCU walk.
Move the name strings into a separate array ofs->config.lowerdirs and
reuse the ofs->config.lowerdirs array as the temporary mount array to
pass to kern_unmount_array().
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231002023711.GP3389589@ZenIV/
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Stable-dep-of: 32db510708 ("ovl: fix regression in showing lowerdir mount option")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c34706acf4 ]
Ever since commit 91c7794713 ("ovl: allow filenames with comma"), the
following example was legit overlayfs mount options:
mount -t overlay overlay -o 'lowerdir=/tmp/a\,b/lower' /mnt
The conversion to new mount api moved to using the common helper
generic_parse_monolithic() and discarded the specialized ovl_next_opt()
option separator.
Bring back ovl_next_opt() and use vfs_parse_monolithic_sep() to fix the
regression.
Reported-by: Ryan Hendrickson <ryan.hendrickson@alum.mit.edu>
Closes: https://lore.kernel.org/r/8da307fb-9318-cf78-8a27-ba5c5a0aef6d@alum.mit.edu/
Fixes: 1784fbc2ed ("ovl: port to new mount api")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e001d1447c ]
Factor out vfs_parse_monolithic_sep() from generic_parse_monolithic(),
so filesystems could use it with a custom option separator callback.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Stable-dep-of: c34706acf4 ("ovl: fix regression in parsing of mount options with escaped comma")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35931eb394 ]
These have a variety of causes and a corresponding variety of solutions.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Message-Id: <20230818200824.2720007-1-willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: c34706acf4 ("ovl: fix regression in parsing of mount options with escaped comma")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d9cea8a55 ]
On 8xx, PAGE_NONE is handled by setting _PAGE_NA instead of clearing
_PAGE_USER.
But then pte_user() returns 1 also for PAGE_NONE.
As _PAGE_NA prevent reads, add a specific version of pte_read()
that returns 0 when _PAGE_NA is set instead of always returning 1.
Fixes: 351750331f ("powerpc/mm: Introduce _PAGE_NA")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/57bcfbe578e43123f9ed73e040229b80f1ad56ec.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01f1ae2733 ]
The synchronize_irq(c->irq) will not return until the IRQ handler
mtk_uart_apdma_irq_handler() is completed. If the synchronize_irq()
holds a spin_lock and waits the IRQ handler to complete, but the
IRQ handler also needs the same spin_lock. The deadlock will happen.
The process is shown below:
cpu0 cpu1
mtk_uart_apdma_device_pause() | mtk_uart_apdma_irq_handler()
spin_lock_irqsave() |
| spin_lock_irqsave()
//hold the lock to wait |
synchronize_irq() |
This patch reorders the synchronize_irq(c->irq) outside the spin_lock
in order to mitigate the bug.
Fixes: 9135408c3a ("dmaengine: mediatek: Add MediaTek UART APDMA support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20230806032511.45263-1-duoming@zju.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0409dd3d1 ]
In idxd_cmd_exec(), wait_event_lock_irq() explicitly calls
spin_unlock_irq()/spin_lock_irq(). If the interrupt is on before entering
wait_event_lock_irq(), it will become off status after
wait_event_lock_irq() is called. Later, wait_for_completion() may go to
sleep but irq is disabled. The scenario is warned in might_sleep().
Fix it by using spin_lock_irqsave() instead of the primitive spin_lock()
to save the irq status before entering wait_event_lock_irq() and using
spin_unlock_irqrestore() instead of the primitive spin_unlock() to restore
the irq status before entering wait_for_completion().
Before the change:
idxd_cmd_exec() {
interrupt is on
spin_lock() // interrupt is on
wait_event_lock_irq()
spin_unlock_irq() // interrupt is enabled
...
spin_lock_irq() // interrupt is disabled
spin_unlock() // interrupt is still disabled
wait_for_completion() // report "BUG: sleeping function
// called from invalid context...
// in_atomic() irqs_disabled()"
}
After applying spin_lock_irqsave():
idxd_cmd_exec() {
interrupt is on
spin_lock_irqsave() // save the on state
// interrupt is disabled
wait_event_lock_irq()
spin_unlock_irq() // interrupt is enabled
...
spin_lock_irq() // interrupt is disabled
spin_unlock_irqrestore() // interrupt is restored to on
wait_for_completion() // No Call trace
}
Fixes: f9f4082dbc ("dmaengine: idxd: remove interrupt disable for cmd_lock")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Signed-off-by: Lijun Pan <lijun.pan@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20230916060619.3744220-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fbe1bf1e5f upstream.
This reverts commit 45e34c8af5, and the
two subsequent fixes to it:
3f874c9b2a ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
b1472a60a5 ("x86/smp: Don't send INIT to boot CPU")
because it seems to result in hung machines at shutdown. Particularly
some Dell machines, but Thomas says
"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
at least that's what I could figure out from the various bug reports.
I don't know which CPUs the DELL machines have, so I can't say it's a
pattern.
I agree with the revert for now"
Ashok Raj chimes in:
"There was a report (probably this same one), and it turns out it was a
bug in the BIOS SMI handler.
The client BIOS's were waiting for the lowest APICID to be the SMI
rendevous master. If this is MeteorLake, the BSP wasn't the one with
the lowest APIC and it triped here.
The BIOS change is also being pushed to others for assimilation :)
Server BIOS's had this correctly for a while now"
and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).
Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e59e38158c upstream.
The USB2412 is a 2-Port USB 2.0 hub controller that provides a reset pin
and a single 3v3 powre source, which makes it suitable to be controlled
by the onboard_hub driver.
This hub has the same reset timings as USB2514/2517 and the same
onboard hub specific-data can be reused for USB2412.
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Cc: stable <stable@kernel.org>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20230911-topic-2412_onboard_hub-v1-1-7704181ddfff@wolfvision.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34f08eb0ba upstream.
Gadget ACM while unloading module try to dequeue not queued usb
request which causes the kernel to crash.
Patch adds extra condition to check whether usb request is processed
by CDNSP driver.
cc: stable@vger.kernel.org
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20230713081429.326660-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 427694cfaa upstream.
When NCM is used with hosts like Windows PC, it is observed that there are
multiple NTB's contained in one usb request giveback. Since the driver
unwraps the obtained request data assuming only one NTB is present, we
loose the subsequent NTB's present resulting in data loss.
Fix this by checking the parsed block length with the obtained data
length in usb request and continue parsing after the last byte of current
NTB.
Cc: stable@vger.kernel.org
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230927105858.12950-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a00e197dae upstream.
Currently if ucsi_send_command() fails, then we bail out without
clearing EVENT_PENDING flag. So when the next connector change
event comes, ucsi_connector_change() won't queue the con->work,
because of which none of the new events will be processed.
Fix this by clearing EVENT_PENDING flag if ucsi_send_command()
fails.
Cc: stable@vger.kernel.org # 5.16
Fixes: 512df95b94 ("usb: typec: ucsi: Better fix for missing unplug events issue")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1694423055-8440-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89434b069e upstream.
Upon receiving an ACK for a sent EXIT_MODE message, the DisplayPort
driver currently resets the status and configuration of the port partner.
The hpd signal is not updated despite being part of the status, so the
Display stack can still transmit video despite typec_altmode_exit placing
the lanes in a Safe State.
Set hpd to low when a sent EXIT_MODE message is ACK'ed.
Fixes: 0e3bb7d689 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009210057.3773877-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dddb91cde5 upstream.
The link between the partner device and its USB Power
Delivery instance was never removed which prevented the
device from being released. Removing the link always when
the partner is unregistered.
Fixes: b04e1747fb ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Cc: stable <stable@kernel.org>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Closes: https://lore.kernel.org/linux-usb/ZSUMXdw9nanHtnw2@kuha.fi.intel.com/
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231010141749.3912016-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07a2766575 upstream.
If configuration options SOFTIRQ_ON_OWN_STACK and PREEMPT_RT
are enabled simultaneously under RISC-V architecture,
it will result in a compilation failure:
arch/riscv/kernel/irq.c:64:6: error: redefinition of 'do_softirq_own_stack'
64 | void do_softirq_own_stack(void)
| ^~~~~~~~~~~~~~~~~~~~
In file included from ./arch/riscv/include/generated/asm/softirq_stack.h:1,
from arch/riscv/kernel/irq.c:15:
./include/asm-generic/softirq_stack.h:8:20: note: previous definition of 'do_softirq_own_stack' was here
8 | static inline void do_softirq_own_stack(void)
| ^~~~~~~~~~~~~~~~~~~~
After changing CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK to CONFIG_SOFTIRQ_ON_OWN_STACK,
compilation can be successful.
Fixes: dd69d07a5a ("riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK")
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20230913052940.374686-1-wangjiexun@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 505b02957e upstream.
There are two duplicate `-O binary` flags when objcopying from vmlinux
to Image/xipImage.
RISC-V set `-O binary` flag in both OBJCOPYFLAGS in the top-level riscv
Makefile and OBJCOPYFLAGS_* in the boot/Makefile, and the objcopy cmd
in Kbuild would join them together.
The `-O binary` flag is only needed for objcopying Image, so remove the
OBJCOPYFLAGS in the top-level riscv Makefile.
Fixes: c0fbcd9918 ("RISC-V: Build flat and compressed kernel images")
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230914091334.1458542-1-songshuaishuai@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df8fdd01c9 upstream.
As per the datasheet, the clock selection Bits 2:0 – TCCLKS[2:0] should
be set to 0 while using the internal GCLK (TIMER_CLOCK1).
Fixes: 106b104137 ("counter: Add microchip TCB capture counter")
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Link: https://lore.kernel.org/r/20230905100835.315024-1-dharma.b@microchip.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3170256d7b upstream.
When trying to watch a component array extension, and the array isn't the
first extended element, it fails as the type comparison is always done on
the 1st element. Fix it by indexing the 'ext' array.
Example on a dummy struct counter_comp:
static struct counter_comp dummy[] = {
COUNTER_COMP_DIRECTION(..),
...,
COUNTER_COMP_ARRAY_CAPTURE(...),
};
static struct counter_count dummy_cnt = {
...
.ext = dummy,
.num_ext = ARRAY_SIZE(dummy),
}
Currently, counter_get_ext() returns -EINVAL when trying to add a watch
event on one of the capture array element in such example.
Fixes: d2011be1e2 ("counter: Introduce the COUNTER_COMP_ARRAY component type")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230829134029.2402868-2-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f564b92cf upstream.
RISC-V software breakpoint trap handlers are used for {k,u}probes.
When trapping from kernelmode, only the kernelmode handlers should be
considered. Vice versa, only usermode handlers for usermode
traps. This is not the case on RISC-V, which can trigger a bug if a
userspace process uses uprobes, and a WARN() is triggered from
kernelmode (which is implemented via {c.,}ebreak).
The kernel will trap on the kernelmode {c.,}ebreak, look for uprobes
handlers, realize incorrectly that uprobes need to be handled, and
exit the trap handler early. The trap returns to re-executing the
{c.,}ebreak, and enter an infinite trap-loop.
The issue was found running the BPF selftest [1].
Fix this issue by only considering the swbp/ss handlers for
kernel/usermode respectively. Also, move CONFIG ifdeffery from traps.c
to the asm/{k,u}probes.h headers.
Note that linux/uprobes.h only include asm/uprobes.h if CONFIG_UPROBES
is defined, which is why asm/uprobes.h needs to be unconditionally
included in traps.c
Link: https://lore.kernel.org/linux-riscv/87v8d19aun.fsf@all.your.base.are.belong.to.us/ # [1]
Fixes: 74784081aa ("riscv: Add uprobes supported")
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Nam Cao <namcaov@gmail.com>
Tested-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230912065619.62020-1-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a20c4350c6 upstream.
The clear TM function error log status was inverted.
Fixes: 4693fad7d6 ("scsi: ufs: core: Log error handler activity")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20231003022002.25578-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c153a4edff upstream.
The code in find_pinctrl() takes a mutex and traverses a list of pinctrl
structures. Later the caller bumps up reference count on the found
structure. Such pattern is not safe as pinctrl that was found may get
deleted before the caller gets around to increasing the reference count.
Fix this by taking the reference count in find_pinctrl(), while it still
holds the mutex.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/ZQs1RgTKg6VJqmPs@google.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b83ce9cb4a upstream.
When a fence signals there is a very small race window where the timestamp
isn't updated yet. sync_file solves this by busy waiting for the
timestamp to appear, but on other ocassions didn't handled this
correctly.
Provide a dma_fence_timestamp() helper function for this and use it in
all appropriate cases.
Another alternative would be to grab the spinlock when that happens.
v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case
the accurate timestamp is needed and/or the timestamp is not based on
ktime (e.g. hw timestamp)
v3 chk: drop the parameter again for unified handling
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1774baa64f ("drm/scheduler: Change scheduled fence track v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ca0b60515 upstream.
One PID may appear multiple times in a preloaded pidlist.
(Possibly due to PID recycling but we have reports of the same
task_struct appearing with different PIDs, thus possibly involving
transfer of PID via de_thread().)
Because v1 seq_file iterator uses PIDs as position, it leads to
a message:
> seq_file: buggy .next function kernfs_seq_next did not update position index
Conservative and quick fix consists of removing duplicates from `tasks`
file (as opposed to removing pidlists altogether). It doesn't affect
correctness (it's sufficient to show a PID once), performance impact
would be hidden by unconditional sorting of the pidlist already in place
(asymptotically).
Link: https://lore.kernel.org/r/20230823174804.23632-1-mkoutny@suse.com/
Suggested-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c9ca8de2eb upstream.
On some OEM systems, adding a W7900 dGPU triggers RAS errors and hangs
at a black screen on startup. This issue occurs only if `ucsi_acpi` has
loaded before `amdgpu` has loaded. The reason for this failure is that
`amdgpu` uses power_supply_is_system_supplied() to determine if running
on AC or DC power at startup. If this value is reported incorrectly the
dGPU will also be programmed incorrectly and trigger errors.
power_supply_is_system_supplied() reports the wrong value because UCSI
power supplies provided as part of the system don't properly report the
scope as "DEVICE" scope (not powering the system).
In order to fix this issue check the capabilities reported from the UCSI
power supply to ensure that it supports charging a battery and that it can
be powered by AC. Mark the scope accordingly.
Cc: stable@vger.kernel.org
Fixes: a7fbfd44c0 ("usb: typec: ucsi: Mark dGPUs as DEVICE scope")
Link: https://www.intel.com/content/www/us/en/products/docs/io/universal-serial-bus/usb-type-c-ucsi-spec.html p28
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231009184643.129986-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8894b43254 upstream.
Add the missing endianness conversion when sending the enable request so
that the driver will work also on a hypothetical big-endian machine.
This issue was reported by sparse.
Fixes: 29e8142b56 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Cc: stable@vger.kernel.org # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230929101649.20206-1-johan+linaro@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5efb4e6fb upstream.
Upstream commit 717c6ec241 ("can: sja1000: Prevent overrun stalls with
a soft reset on Renesas SoCs") fixes an issue with Renesas own SJA1000
CAN controller reception: the Rx buffer is only 5 messages long, so when
the bus loaded (eg. a message every 50us), overrun may easily
happen. Upon an overrun situation, due to a possible internal crosstalk
situation, the controller enters a frozen state which only can be
unlocked with a soft reset (experimentally). The solution was to offload
a call to sja1000_start() in a threaded handler. This needs to happen in
process context as this operation requires to sleep. sja1000_start()
basically enters "reset mode", performs a proper software reset and
returns back into "normal mode".
Since this fix was introduced, we no longer observe any stalls in
reception. However it was sporadically observed that the transmit path
would now freeze. Further investigation blamed the fix mentioned above,
and especially the reset operation. Reproducing the reset in a loop
helped identifying what could possibly go wrong. The sja1000 is a single
Tx queue device, which leverages the netdev helpers to process one Tx
message at a time. The logic is: the queue is stopped, the message sent
to the transceiver, once properly transmitted the controller sets a
status bit which triggers an interrupt, in the interrupt handler the
transmission status is checked and the queue woken up. Unfortunately, if
an overrun happens, we might perform the soft reset precisely between
the transmission of the buffer to the transceiver and the advent of the
transmission status bit. We would then stop the transmission operation
without re-enabling the queue, leading to all further transmissions to
be ignored.
The reset interrupt can only happen while the device is "open", and
after a reset we anyway want to resume normal operations, no matter if a
packet to transmit got dropped in the process, so we shall wake up the
queue. Restarting the device and waking-up the queue is exactly what
sja1000_set_mode(CAN_MODE_START) does. In order to be consistent about
the queue state, we must acquire a lock both in the reset handler and in
the transmit path to ensure serialization of both operations. It turns
out, a lock is already held when entering the transmit path, so we can
just acquire/release it as well with the regular net helpers inside the
threaded interrupt handler and this way we should be safe. As the
reset handler might still be called after the transmission of a frame to
the transceiver but before it actually gets transmitted, we must ensure
we don't leak the skb, so we free it (the behavior is consistent, no
matter if there was an skb on the stack or not).
Fixes: 717c6ec241 ("can: sja1000: Prevent overrun stalls with a soft reset on Renesas SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/all/20231002160206.190953-1-miquel.raynal@bootlin.com
[mkl: fixed call to can_free_echo_skb()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14690995c1 upstream.
When there are CT table entries, and you rmmod nfp, the following
events can happen:
task1：
nfp_net_pci_remove
↓
nfp_flower_stop->(asynchronous)tcf_ct_flow_table_cleanup_work(3)
↓
nfp_zone_table_entry_destroy(1)
task2：
nfp_fl_ct_handle_nft_flow(2)
When the execution order is (1)->(2)->(3), it will crash. Therefore, in
the function nfp_fl_ct_del_flow, nf_flow_table_offload_del_cb needs to
be executed synchronously.
At the same time, in order to solve the deadlock problem and the problem
of rtnl_lock sometimes failing, replace rtnl_lock with the private
nfp_fl_lock.
Fixes: 7cc93d888d ("nfp: flower-ct: remove callback delete deadlock")
Cc: stable@vger.kernel.org
Signed-off-by: Yanguo Li <yanguo.li@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1364a3c391 upstream.
Only call truncate_bdev_range() if the fallocate mode is supported. This
fixes a bug where data in the pagecache could be invalidated if the
fallocate() was called on the block device with an invalid mode.
Fixes: 25f4c41415 ("block: implement (some of) fallocate for block devices")
Cc: stable@vger.kernel.org
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Fixes: line? I've never seen those wrapped.
Link: https://lore.kernel.org/r/20231011201230.750105-1-sarthakkukreti@chromium.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5093bbfc10 upstream.
Our current route lookups (mctp_route_lookup and mctp_route_lookup_null)
traverse the net's route list without the RCU read lock held. This means
the route lookup is subject to preemption, resulting in an potential
grace period expiry, and so an eventual kfree() while we still have the
route pointer.
Add the proper read-side critical section locks around the route
lookups, preventing premption and a possible parallel kfree.
The remaining net->mctp.routes accesses are already under a
rcu_read_lock, or protected by the RTNL for updates.
Based on an analysis from Sili Luo <rootlab@huawei.com>, where
introducing a delay in the route lookup could cause a UAF on
simultaneous sendmsg() and route deletion.
Reported-by: Sili Luo <rootlab@huawei.com>
Fixes: 889b7da23a ("mctp: Add initial routing framework")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/29c4b0e67dc1bf3571df3982de87df90cae9b631.1696837310.git.jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4384b3e54 upstream.
There is a potential race condition in amdtee_close_session that may
cause use-after-free in amdtee_open_session. For instance, if a session
has refcount == 1, and one thread tries to free this session via:
kref_put(&sess->refcount, destroy_session);
the reference count will get decremented, and the next step would be to
call destroy_session(). However, if in another thread,
amdtee_open_session() is called before destroy_session() has completed
execution, alloc_session() may return 'sess' that will be freed up
later in destroy_session() leading to use-after-free in
amdtee_open_session.
To fix this issue, treat decrement of sess->refcount and removal of
'sess' from session list in destroy_session() as a critical section, so
that it is executed atomically.
Fixes: 757cc3e9ff ("tee: add AMD-TEE driver")
Cc: stable@vger.kernel.org
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 423622a90a upstream.
Add a special case for gpio_count == 1 && gpio_int_idx == 0 to
goodix_add_acpi_gpio_mappings().
It seems that on newer x86/ACPI devices the reset and irq GPIOs are no
longer listed as GPIO resources instead there is only 1 GpioInt resource
and _PS0 does the whole reset sequence for us.
This means that we must call acpi_device_fix_up_power() on these devices
to ensure that the chip is reset before we try to use it.
This part was already fixed in commit 3de93e6ed2 ("Input: goodix - call
acpi_device_fix_up_power() in some cases") by adding a call to
acpi_device_fix_up_power() to the generic "Unexpected ACPI resources"
catch all.
But it turns out that this case on some hw needs some more special
handling. Specifically the firmware may bootup with the IRQ pin in
output mode. The reset sequence from ACPI _PS0 (executed by
acpi_device_fix_up_power()) should put the pin in input mode,
but the GPIO subsystem has cached the direction at bootup, causing
request_irq() to fail due to gpiochip_lock_as_irq() failure:
[ 9.119864] Goodix-TS i2c-GDIX1002:00: Unexpected ACPI resources: gpio_count 1, gpio_int_idx 0
[ 9.317443] Goodix-TS i2c-GDIX1002:00: ID 911, version: 1060
[ 9.321902] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/0000:00:17.0/i2c_designware.4/i2c-5/i2c-GDIX1002:00/input/input8
[ 9.327840] gpio gpiochip0: (INT3453:00): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
[ 9.327856] gpio gpiochip0: (INT3453:00): unable to lock HW IRQ 26 for IRQ
[ 9.327861] genirq: Failed to request resources for GDIX1002:00 (irq 131) on irqchip intel-gpio
[ 9.327912] Goodix-TS i2c-GDIX1002:00: request IRQ failed: -5
Fix this by adding a special case for gpio_count == 1 && gpio_int_idx == 0
which adds an ACPI GPIO lookup table for the int GPIO even though we cannot
use it for reset purposes (as there is no reset GPIO).
Adding the lookup will make the gpiod_int = gpiod_get(..., GPIOD_IN) call
succeed, which will explicitly set the direction to input fixing the issue.
Note this re-uses the acpi_goodix_int_first_gpios[] lookup table, since
there is only 1 GPIO in the ACPI resources the reset entry in that
lookup table will amount to a no-op.
Reported-and-tested-by: Michael Smith <1973.mjsmith@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231003215144.69527-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80f39e1c27 upstream.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:308A) not working at all.
Since the integrated touchpad is managed by the i2c_designware input
driver in the Linux kernel and you can't find a PS/2 mouse port on the
computer I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a65cd7ef5a upstream.
Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.
Signed-off-by: Matthias Berndt <matthias_berndt@gmx.de>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2cb5cc822 upstream.
When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.
The issue was uncovered when in 92e24e0e57 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.
Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jeffery Miller <jefferymiller@google.com>
Fixes: bf232e460a ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/20231005002249.554877-1-jefferymiller@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07bb00ef00 upstream.
In this code "ret" is type long and "src_objlen" is unsigned int. The
problem is that on 32bit systems, when we do the comparison signed longs
are type promoted to unsigned int. So negative error codes from
do_splice_direct() are treated as success instead of failure.
Cc: stable@vger.kernel.org
Fixes: 1b0c3b9f91 ("ceph: re-org copy_file_range and fix some error paths")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
