The custom rate constraint list was necessary to support 12kHz and 24kHz.
These rates are now available through SNDRV_PCM_RATE_12000 and
SNDRV_PCM_RATE_24000.
Use them and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-7-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 12kHz and 24kHz.
These rates are now available through SNDRV_PCM_RATE_12000 and
SNDRV_PCM_RATE_24000.
Use them and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-6-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-5-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-4-8371948d3921@baylibre.com
The custom rate constraint lists were necessary to support 12kHz and 24kHz.
These rates are now available through SNDRV_PCM_RATE_12000 and
SNDRV_PCM_RATE_24000.
Use them and drop the custom rate constraint rules.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-3-8371948d3921@baylibre.com
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-2-8371948d3921@baylibre.com
This adds a sample rate definition for 12kHz, 24kHz and 128kHz.
Admittedly, just a few drivers are currently using these sample
rates but there is enough of a recurrence to justify adding a definition
for them and remove some custom rate constraint code while at it.
The new definitions are not added to the interval definitions, such as
SNDRV_PCM_RATE_8000_44100, because it would silently add new supported
rates to drivers that may or may not support them. For sure the drivers
have not been tested for these new rates so it is better to leave them out
of interval definitions.
That being said, the added rates are multiples of well know rates families,
it is very likely that a lot of devices out there actually supports them.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-1-8371948d3921@baylibre.com
Implement sync, output format, and input status mixer controls, to allow
the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O
interface.
This does not implement the matrix mixer, output gain controls, or input
level meter feedback. The full mixer interface is only really usable
using a dedicated userspace control app (there are too many mixer nodes
for alsamixer to be usable), so for now we leave it up to userspace to
directly control these features using raw USB control messages. This is
similar to how it's done with some FireWire interfaces (ffado-mixer).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add trivial support for audio streaming on the RME Digiface USB. Binds
only to the first interface to allow userspace to directly drive the
complex I/O and matrix mixer controls.
Signed-off-by: Cyan Nyan <cyan.vtb@gmail.com>
[Lina: Added 2x/4x sample rate support & boot/format quirks]
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-1-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic in those laptops suffers too high gain resulting in mostly (fan
or else) noise being recorded. In addition to the existing fixup about
mic detection, apply also limiting its boost. While at it, extend the
quirk to also V5[46]0TNE models, which have the same issue.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903124939.6213-1-marmarek@invisiblethingslab.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We used to wrap with no_free_ptr() for the return value from
memdup_user() with errors where the auto cleanup is applied. This was
a workaround because the initial implementation of kfree auto-cleanup
checked only NULL pointers.
Since recently, though, the kfree auto-cleanup checks with
IS_ERR_OR_NULL() (by the commit cd7eb8f83fcf ("mm/slab: make
__free(kfree) accept error pointers")), hence those workarounds became
superfluous. Let's drop them now.
Link: https://patch.msgid.link/20240902075246.3743-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo V145 is having phase inverted dmic but simply applying inverted
dmic fixups does not work. Chaining up verb fixes for ALC283 enables
inverting dmic fixup to work properly.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240830-lenovo-v145-fixes-v3-1-f7b7265068fa@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We do not need model specific HDA quirks to construct the component
binding details of Cirrus Logic companion amplifiers as this information
is already present in the ACPI.
Quirks are then only required for special workarounds not described in
the ACPI such as internal configuration of the Realtek codecs.
The codec pointer is now initialized in hda_component_manager_init() so
that we can detect when companion amplifiers are found in the ACPI but
the SSID invokes a quirk that also attempts to create the component
binding.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240829161114.140938-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Sirius notebooks have two sets of speakers 0x17 (sides) and
0x1d (top center). The side speakers are active by default but
the top speakers aren't.
This patch provides a pincfg quirk to activate the top speakers.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the last-standing user of PCM vmalloc buffer helper API took its
own buffer management, we can finally drop those API functions, which
were leftover after reorganization of ALSA memalloc code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807152725.18948-3-tiwai@suse.de
The dw-hdmi drm bridge driver is the only one who still uses the ALSA
vmalloc helper API functions. A previous attempt to change the way of
buffer management wasn't taken for this legacy stuff, as we had little
chance for test and some risk of major breaking.
Instead, this patch moves the vmalloc buffer stuff into the dw-hdmi
driver code itself, so that we can drop them from ALSA core code
afterwards.
There should be no functional changes.
Link: https://lore.kernel.org/20191210154536.29819-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807152725.18948-2-tiwai@suse.de
Move the initialization of parent->mutex into
hda_component_manager_init() so that it is always valid.
In hda_component_manager_bind() do not clear the parent information.
Only zero-fill the per-component data ready for it to be filled in
by the components as they bind.
Previously parent->mutex was being initialized only in
hda_component_manager_bind(). This meant that it was only
initialized if all components appeared and there was a bind callback.
If there wasn't a bind the mutex object was not valid when the
Realtek driver called any of the other functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 047b9cbbaa8e ("ALSA: hda: hda_component: Protect shared data with a mutex")
Link: https://patch.msgid.link/20240826094940.45563-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let the kmemdup_array() take care about multiplication
and possible overflows.
Using kmemdup_array() is more appropriate and makes the code
easier to audit.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240826043454.3198-1-shenlichuan@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the HP Pavilion Aero 13 (13-bg0xxx) (year 2024) to list of
quirks for keyboard LED mute indication.
The laptop has two LEDs (one for speaker and one for mic mute). The
pre-existing quirk ALC245_FIXUP_HP_X360_MUTE_LEDS chains both the quirk for
mic and speaker mute.
Tested on 6.11.0-rc4 with the aforementioned laptop.
Signed-off-by: Hendrik Borghorst <hendrikborghorst@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825174351.5687-1-hendrikborghorst@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
144d:c1cc requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: YOUNGJIN JOO <neoelec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825092515.28728-1-neoelec@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A relatively large collection of fixes here, all driver specific and
none of them particularly major, plus one MAINTAINERS update. There's
been a bunch of work on module autoloading from several people.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbHv+8ACgkQJNaLcl1U
h9Czhgf/VTYu0+olW0SoNxGIzRSi89Sx7HFAug33EiTJ1JC5fvFxV1G94VMTPBkn
mXv+bb2WbPDSDwsehveBAxZLc1EnmqB5KZkAd/7DTuU1wVfF7PIWOAJZikc+blAJ
fYFUr+aD7dc+evcZCiUPwAPYFxuusQOQAL7Y48wrG7wOTlropJdkwugiJ4fQWIk7
6fuQ3vxwUjACTjP4u6EV+a/H+XMKLqy9D05PCMvupp+awY3HzPoan5/w5vcq7WcQ
xwzvTuz2Snn5ay83LPhyTIjGy40/O2n+LblnuqEzLD6KaPSNqGRzuCdqdACstjX+
xD/1B+wAkVG+oajXKQpu2tvEWL1iUg==
=xZ3o
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.11-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A relatively large collection of fixes here, all driver specific and
none of them particularly major, plus one MAINTAINERS update. There's
been a bunch of work on module autoloading from several people.
If the timestamp of a calibration entry is 0 it is an unused entry and
must be ignored.
Some end-products reserve EFI space for calibration entries by shipping
with a zero-filled EFI file. When searching the file for calibration
data the driver must skip the empty entries. The timestamp of a valid
entry is always non-zero.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1cad8725f2b9 ("ASoC: cs-amp-lib: Add helpers for factory calibration data")
Link: https://patch.msgid.link/20240822133544.304421-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For a normal calibration blob the calTarget values must be non-zero and
unique, and the calTime values must be non-zero. Don't rely on
get_random_bytes() to be random enough to guarantee this. Force the
calTarget and calTime values to be valid while retaining randomness
in the values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers")
Link: https://patch.msgid.link/20240822115725.259568-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Dell platform with ALC215 ALC285 ALC289 ALC225 ALC295 ALC299, plug
headphone or headset.
It had a chance to get no sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/d0de1b03fd174520945dde216d765223@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell platform, plug headphone or headset, it had a chance to get no
sound from headphone.
Replace depop procedure will solve this issue.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/bb8e2de30d294dc287944efa0667685a@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-3-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA driver cannot assume that the order that the devices are
specified in the cirrus,dev-index matches the order of calibration
entries.
Only a calibration entry with a matching silicon id will be used.
Fixes: cfa43aaa7948 ("ALSA: hda: cs35l56: Apply amp calibration from EFI data")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240821124711.44325-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing CS35L56 products can make use of the fixup function that
works out the component binding details so we can remove the fixed
configuration fixup functions.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240819123736.111946-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All callers of get_event_dest_clienter() pass 0 to the filter
argument, and it means that the check there is utterly redundant.
Drop the superfluous filter argument and its check as a code cleanup.
Link: https://patch.msgid.link/20240819084757.11902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP events don't use the event type field, hence it's invalid to apply
the filter, which may drop the events unexpectedly.
Skip the event filtering for UMP events, instead.
Fixes: 46397622a3fa ("ALSA: seq: Add UMP support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240819084156.10286-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Pavilion Plus 14-ey0xxx needs existing quirk
ALC245_FIXUP_HP_X360_MUTE_LEDS to enable its mute/micmute LEDs.
Signed-off-by: John Sweeney <john.sweeney@runbox.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/E1sfhrD-0007TA-HC@rmmprod05.runbox
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here are 2 driver fixes for regressions from 6.11-rc1 due to the driver
core change making a structure in a driver core callback const. These
were missed by all testing EXCEPT for what Bart happened to be running,
so I appreciate the fixes provided here for some odd/not-often-used
driver subsystems that nothing else happened to catch.
Both of these fixes have been in linux-next all week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIWNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylHBgCdGDGhaQp4W/dLejZBeMtuGLILTcoAnRm7/Aj8
U/uR4ukttCXjfvjlalxi
=t+bl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are "obviously correct" so will be safe :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIT4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymYQACfeV6tIMHlHSVS9VSbiXHJAovjvFEAoLQvuvBS
0dN1Q4iYF+5Sy4JWAZb/
=ztLK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
Here are some small tty and serial driver fixes for 6.11-rc4 to resolve
some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIUhw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymHUACdHhcerkgnsJxwy4pUTbH1mjCsQ40AniqUkc/l
5bShqqmhDP1Y5zh7D5w5
=rdx/
-----END PGP SIGNATURE-----
Merge tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIVPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXZQCgtIX9QomJztpybexiFP70JJrGksMAn3SHFdHG
Fp1XVUssS8asP7H0M2iE
=m7n6
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
-----BEGIN PGP SIGNATURE-----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=YBfJ
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a test for the new functionality of userspace-driven timers and the
tool which allows us to count timer ticks in a certain time period. The
test:
1. Creates a userspace-driven timer with ioctl to /dev/snd/timer
2. Starts the `global-timer` application to count the ticks of the timer
from step 1.
3. Asynchronously triggers the timer multiple times with some interval
4. Compares the amount of caught ticks with the amount of trigger calls.
Since we can't include <alsa/asoundlib.h> and <sound/asound.h> in one
file due to overlapping declarations, I have to split the test into two
applications: one of them counts the amount of timer ticks in the
defined time period, and another one is the actual test which creates
the timer, triggers it periodically and starts the first app to count
the amount of ticks in a separate thread.
Besides from testing the functionality itself, the test represents a
sample application showing userspace-driven ALSA timers API.
Also, the timer test includes a test case which tries to create a timer
with invalid resolution (=0), and NULL as a timer info structure.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-5-ivan.orlov0322@gmail.com
Implement two ioctl calls in order to support virtual userspace-driven
ALSA timers.
The first ioctl is SNDRV_TIMER_IOCTL_CREATE, which gets the
snd_timer_uinfo struct as a parameter and puts a file descriptor of a
virtual timer into the `fd` field of the snd_timer_unfo structure. It
also updates the `id` field of the snd_timer_uinfo struct, which
provides a unique identifier for the timer (basically, the subdevice
number which can be used when creating timer instances).
This patch also introduces a tiny id allocator for the userspace-driven
timers, which guarantees that we don't have more than 128 of them in the
system.
Another ioctl is SNDRV_TIMER_IOCTL_TRIGGER, which allows us to trigger
the virtual timer (and calls snd_timer_interrupt for the timer under
the hood), causing all of the timer instances binded to this timer to
execute their callbacks.
The maximum amount of ticks available for the timer is 1 for the sake of
simplicity of the userspace API. 'start', 'stop', 'open' and 'close'
callbacks for the userspace-driven timers are empty since we don't
really do any hardware initialization here.
Suggested-by: Axel Holzinger <aholzinger@gmx.de>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-4-ivan.orlov0322@gmail.com
