For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
Cc: stable@vger.kernel.org
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com
Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These are called from blkcg_print_blkgs() which already disables IRQs so
disabling it again is wrong. It means that IRQs will be enabled slightly
earlier than intended, however, so far as I can see, this bug is harmless.
Fixes: 35198e323001 ("blk-iocost: read params inside lock in sysfs apis")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Zv0kudA9xyGdaA4g@stanley.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the documentation to match the new function signature.
Fixes: 76c313f658d2752 ("blk-integrity: improved sg segment mapping")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240922141800.3622319-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Syzbot reported]
WARNING: possible circular locking dependency detected
6.11.0-rc4-syzkaller-00019-gb311c1b497e5 #0 Not tainted
------------------------------------------------------
kswapd0/78 is trying to acquire lock:
ffff88801b8d8930 (&group->mark_mutex){+.+.}-{3:3}, at: fsnotify_group_lock include/linux/fsnotify_backend.h:270 [inline]
ffff88801b8d8930 (&group->mark_mutex){+.+.}-{3:3}, at: fsnotify_destroy_mark+0x38/0x3c0 fs/notify/mark.c:578
but task is already holding lock:
ffffffff8ea2fd60 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6841 [inline]
ffffffff8ea2fd60 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xbb4/0x35a0 mm/vmscan.c:7223
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
...
kmem_cache_alloc_noprof+0x3d/0x2a0 mm/slub.c:4044
inotify_new_watch fs/notify/inotify/inotify_user.c:599 [inline]
inotify_update_watch fs/notify/inotify/inotify_user.c:647 [inline]
__do_sys_inotify_add_watch fs/notify/inotify/inotify_user.c:786 [inline]
__se_sys_inotify_add_watch+0x72e/0x1070 fs/notify/inotify/inotify_user.c:729
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (&group->mark_mutex){+.+.}-{3:3}:
...
__mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
fsnotify_group_lock include/linux/fsnotify_backend.h:270 [inline]
fsnotify_destroy_mark+0x38/0x3c0 fs/notify/mark.c:578
fsnotify_destroy_marks+0x14a/0x660 fs/notify/mark.c:934
fsnotify_inoderemove include/linux/fsnotify.h:264 [inline]
dentry_unlink_inode+0x2e0/0x430 fs/dcache.c:403
__dentry_kill+0x20d/0x630 fs/dcache.c:610
shrink_kill+0xa9/0x2c0 fs/dcache.c:1055
shrink_dentry_list+0x2c0/0x5b0 fs/dcache.c:1082
prune_dcache_sb+0x10f/0x180 fs/dcache.c:1163
super_cache_scan+0x34f/0x4b0 fs/super.c:221
do_shrink_slab+0x701/0x1160 mm/shrinker.c:435
shrink_slab+0x1093/0x14d0 mm/shrinker.c:662
shrink_one+0x43b/0x850 mm/vmscan.c:4815
shrink_many mm/vmscan.c:4876 [inline]
lru_gen_shrink_node mm/vmscan.c:4954 [inline]
shrink_node+0x3799/0x3de0 mm/vmscan.c:5934
kswapd_shrink_node mm/vmscan.c:6762 [inline]
balance_pgdat mm/vmscan.c:6954 [inline]
kswapd+0x1bcd/0x35a0 mm/vmscan.c:7223
[Analysis]
The problem is that inotify_new_watch() is using GFP_KERNEL to allocate
new watches under group->mark_mutex, however if dentry reclaim races
with unlinking of an inode, it can end up dropping the last dentry reference
for an unlinked inode resulting in removal of fsnotify mark from reclaim
context which wants to acquire group->mark_mutex as well.
This scenario shows that all notification groups are in principle prone
to this kind of a deadlock (previously, we considered only fanotify and
dnotify to be problematic for other reasons) so make sure all
allocations under group->mark_mutex happen with GFP_NOFS.
Reported-and-tested-by: syzbot+c679f13773f295d2da53@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c679f13773f295d2da53
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240927143642.2369508-1-lizhi.xu@windriver.com
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: b359760d95ee ("ASoC: intel: sof_sdw: Add simple DAI link creation helper")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20240925080030.11262-1-hanchunchao@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In most Linux distribution kernels, the SND is set to m, in such a
case, when booting the kernel on i.MX8MP EVK board, there is a
warning calltrace like below:
Call trace:
snd_card_init+0x484/0x4cc [snd]
snd_card_new+0x70/0xa8 [snd]
snd_soc_bind_card+0x310/0xbd0 [snd_soc_core]
snd_soc_register_card+0xf0/0x108 [snd_soc_core]
devm_snd_soc_register_card+0x4c/0xa4 [snd_soc_core]
That is because the card.owner is not set, a warning calltrace is
raised in the snd_card_init() due to it.
Fixes: aa736700f42f ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://patch.msgid.link/20241002025659.723544-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
My understanding of the interrupts property is that it can either be:
1/ - TX
2/ - TX
- RX
3/ - Common/combined.
There are very little chances that either:
- TX
- Common/combined
or even
- TX
- RX
- Common/combined
could be a thing.
Looking at the interrupt-names definition (which uses oneOf instead of
anyOf), it makes indeed little sense to use anyOf in the interrupts
definition. I believe this is just a mistake, hence let's fix it.
Fixes: 8be90641a0bb ("ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241001204749.390054-1-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add adsp-backed soundcard compatible for QRB4210 RB2 platform,
which as of now looks fully compatible with SM8250.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241002022015.867031-2-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since udf_current_aext() has error handling, udf_next_aext() should have
error handling too. Besides, when too many indirect extents found in one
inode, return -EFSCORRUPTED; when reading block failed, return -EIO.
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241001115425.266556-3-zhaomzhao@126.com
When the trigger_tstamp_latched flag is set, the PCM core code assumes that
the low-level driver handles the trigger timestamping itself. Ensure that
runtime->trigger_tstamp is always updated.
Buglink: https://github.com/alsa-project/alsa-lib/issues/387
Reported-by: Zeno Endemann <zeno.endemann@mailbox.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20241002081306.1788405-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As Jan suggested in links below, refactor udf_current_aext() to
differentiate between error, hit EOF and success, it now takes pointer to
etype to store the extent type, return 1 when getting etype success,
return 0 when hitting EOF and return -errno when err.
Link: https://lore.kernel.org/all/20240912111235.6nr3wuqvktecy3vh@quack3/
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241001115425.266556-2-zhaomzhao@126.com
Since commit d29e741cad3f ("gpio: davinci: drop platform data support"),
irqchip is no longer being registered on platforms what don't use
unbanked gpios. Fix this.
Reported-by: Sabeeh Khan <sabeeh-khan@ti.com>
Fixes: d29e741cad3f ("gpio: davinci: drop platform data support")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20241002071901.2752757-1-vigneshr@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If you enable "Option -> Show Debug Info" and click a link, the program
terminates with the following error:
*** buffer overflow detected ***: terminated
The buffer overflow is caused by the following line:
strcat(data, "$");
The buffer needs one more byte to accommodate the additional character.
Fixes: c4f7398bee9c ("kconfig: qconf: make debug links work again")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now we evaluate directly with preferred_dacs table, the flag is no
longer used and merely a placeholder.
Let's drop the definition and its users.
Link: https://patch.msgid.link/20241001121439.26060-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some time ago, we introduced the obey_preferred_dacs flag for choosing
the DAC/pin pairs specified by the driver instead of parsing the
paths. This works as expected, per se, but there have been a few
cases where we forgot to set this flag while preferred_dacs table is
already set up. It ended up with incorrect wiring and made us
wondering why it doesn't work.
Basically, when the preferred_dacs table is provided, it means that
the driver really wants to wire up to follow that. That is, the
presence of the preferred_dacs table itself is already a "do-it"
flag.
In this patch, we simply replace the evaluation of obey_preferred_dacs
flag with the presence of preferred_dacs table for fixing the
misbehavior. Another patch to drop of the obsoleted flag will
follow.
Fixes: 242d990c158d ("ALSA: hda/generic: Add option to enforce preferred_dacs pairs")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1219803
Link: https://patch.msgid.link/20241001121439.26060-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
new_dir does *NOT* point into dir_folio - it's an inode, not a pointer
to ufs directory entry.
Fixes: 516b97cf03dd6 "ufs: Convert directory handling to kmap_local"
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Declarations local to arch/*/kernel/*.c are better off *not* in a public
header - arch/parisc/kernel/unaligned.h is just fine for those
bits.
With that done parisc asm/unaligned.h is reduced to include
of asm-generic/unaligned.h and can be removed - unaligned.h is in
mandatory-y in include/asm-generic/Kbuild.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 453f86a26945207a16b8f66aaed5962dc2b95b85)
Cc: stable@vger.kernel.org
[Why]
There are more IPS modes other than DMUB_IPS_ENABLE that enables IPS. We
need to enable the hotplug detect idle workqueue for those modes as
well.
[How]
Modify the if condition to initialize the workqueue in all IPS modes
except for DMUB_IPS_DISABLE_ALL.
Fixes: 65444581a4ae ("drm/amd/display: Determine IPS mode by ASIC and PMFW versions")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 181db30bcfed097ecc680539b1eabe935c11f57f)
Cc: stable@vger.kernel.org
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE. This
quirk works around it by skipping VSC that is incompatible with eDP
panels.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3151
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d4257280d7957727998ef90ccc7b69c7cca8376)
Cc: stable@vger.kernel.org
[why]
set dispclk to 0 cause stability issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1c6b16ebf5eb2bc5740be9e37b3a69f1dfe1dded)
Cc: stable@vger.kernel.org
Existing last step of dsc policy is to restore pbn value under minimum compression
when try to greedily disable dsc for a stream failed to fit in MST bw.
Optimized dsc params result from optimization step is not necessarily the minimum compression,
therefore it is not correct to restore the pbn under minimum compression rate.
Restore the pbn under minimum compression instead of the value from optimized pbn could result
in the dsc params not correct at the modeset where atomic_check failed due to not
enough bw. One or more monitors connected could not light up in such case.
Restore the optimized pbn value, instead of using the pbn value under minimum
compression.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 352c3165d2b75030169e012461a16bcf97f392fc)
Cc: stable@vger.kernel.org
[WHY & HOW]
Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause
grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override
to match HW spec.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dad21f910fcea2bdcff4af46159101d7f9cd8ba)
Cc: stable@vger.kernel.org
Starting with upstream Rust commit a5e3a3f9b6bd ("move
`manual_c_str_literals` to complexity"), to be released in Rust 1.83.0
[1], Clippy now warns on `manual_c_str_literals` by default, e.g.:
error: manually constructing a nul-terminated string
--> rust/kernel/kunit.rs:21:13
|
21 | b"\x013%pA\0".as_ptr() as _,
| ^^^^^^^^^^^^^ help: use a `c""` literal: `c"\x013%pA"`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_c_str_literals
= note: `-D clippy::manual-c-str-literals` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_c_str_literals)]`
Apply the suggestion to clean up the warnings.
Link: https://github.com/rust-lang/rust-clippy/pull/13263 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240927164414.560906-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We use Kconfig to select the kernel stack size, doubling the default
size if KASAN is enabled.
But that actually only works if KASAN is selected from the beginning,
meaning that if KASAN config is added later (for example using
menuconfig), CONFIG_THREAD_SIZE_ORDER won't be updated, keeping the
default size, which is not enough for KASAN as reported in [1].
So fix this by moving the logic to compute the right kernel stack into a
header.
Fixes: a7555f6b62e7 ("riscv: stack: Add config of thread stack size")
Reported-by: syzbot+ba9eac24453387a9d502@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000eb301906222aadc2@google.com/ [1]
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240917150328.59831-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Use struct_size() to calculate the number of bytes to allocate for a
new message.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add the __counted_by_le compiler attribute to the flexible array member
Chunks to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Change the data type of the flexible array member Chunks from __u8[] to
struct srv_copychunk[] for ChunkCount to match the number of elements in
the Chunks array. (With __u8[], each srv_copychunk would occupy 24 array
entries and the __counted_by compiler attribute wouldn't be applicable.)
Use struct_size() to calculate the size of the copychunk_ioctl_req.
Read Chunks[0] after checking that ChunkCount is not 0.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use struct_size() to calculate the output buffer length.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Dell All In One (AIO) models released after 2017 may use a backlight
controller board connected to an UART.
In DSDT this uart port will be defined as:
Name (_HID, "DELL0501")
Name (_CID, EisaId ("PNP0501")
The Dell OptiPlex 5480 AIO has an ACPI device for one of its UARTs with
the above _HID + _CID. Loading the dell-uart-backlight driver fails with
the following errors:
[ 18.261353] dell_uart_backlight serial0-0: Timed out waiting for response.
[ 18.261356] dell_uart_backlight serial0-0: error -ETIMEDOUT: getting firmware version
[ 18.261359] dell_uart_backlight serial0-0: probe with driver dell_uart_backlight failed with error -110
Indicating that there is no backlight controller board attached to
the UART, while the GPU's native backlight control method does work.
Add a quirk to use the GPU's native backlight control method on this model.
Fixes: cd8e468efb4f ("ACPI: video: Add Dell UART backlight controller detection")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240918153849.37221-1-hdegoede@redhat.com
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the parse_perf_domain function, if the call to
of_parse_phandle_with_args returns an error, then the reference to the
CPU device node that was acquired at the start of the function would not
be properly decremented.
Address this by declaring the variable with the __free(device_node)
cleanup attribute.
Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20240917134246.584026-1-mikisabate@gmail.com
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
notify_hwp_interrupt() is called via sysvec_thermal() ->
smp_thermal_vector() -> intel_thermal_interrupt() in hard irq context.
For this reason it must not use a simple spin_lock that sleeps with
PREEMPT_RT enabled. So convert it to a raw spinlock.
Reported-by: xiao sheng wen <atzlinux@sina.com>
Link: https://bugs.debian.org/1076483
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: xiao sheng wen <atzlinux@sina.com>
Link: https://patch.msgid.link/20240919081121.10784-2-ukleinek@debian.org
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: 230d42d422e7 ("spi: Add s3c64xx SPI Controller driver")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/20240924134009.116247-2-ben.dooks@codethink.co.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.
Disable ratelimiting for btrfs_printk when CONFIG_BTRFS_DEBUG is
enabled. This allows for more verbose output which is often needed by
functions like btrfs_dump_space_info().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Syzbot reported a NULL pointer dereference with the following crash:
FAULT_INJECTION: forcing a failure.
start_transaction+0x830/0x1670 fs/btrfs/transaction.c:676
prepare_to_relocate+0x31f/0x4c0 fs/btrfs/relocation.c:3642
relocate_block_group+0x169/0xd20 fs/btrfs/relocation.c:3678
...
BTRFS info (device loop0): balance: ended with status: -12
Oops: general protection fault, probably for non-canonical address 0xdffffc00000000cc: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000660-0x0000000000000667]
RIP: 0010:btrfs_update_reloc_root+0x362/0xa80 fs/btrfs/relocation.c:926
Call Trace:
<TASK>
commit_fs_roots+0x2ee/0x720 fs/btrfs/transaction.c:1496
btrfs_commit_transaction+0xfaf/0x3740 fs/btrfs/transaction.c:2430
del_balance_item fs/btrfs/volumes.c:3678 [inline]
reset_balance_state+0x25e/0x3c0 fs/btrfs/volumes.c:3742
btrfs_balance+0xead/0x10c0 fs/btrfs/volumes.c:4574
btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3673
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[CAUSE]
The allocation failure happens at the start_transaction() inside
prepare_to_relocate(), and during the error handling we call
unset_reloc_control(), which makes fs_info->balance_ctl to be NULL.
Then we continue the error path cleanup in btrfs_balance() by calling
reset_balance_state() which will call del_balance_item() to fully delete
the balance item in the root tree.
However during the small window between set_reloc_contrl() and
unset_reloc_control(), we can have a subvolume tree update and created a
reloc_root for that subvolume.
Then we go into the final btrfs_commit_transaction() of
del_balance_item(), and into btrfs_update_reloc_root() inside
commit_fs_roots().
That function checks if fs_info->reloc_ctl is in the merge_reloc_tree
stage, but since fs_info->reloc_ctl is NULL, it results a NULL pointer
dereference.
[FIX]
Just add extra check on fs_info->reloc_ctl inside
btrfs_update_reloc_root(), before checking
fs_info->reloc_ctl->merge_reloc_tree.
That DEAD_RELOC_TREE handling is to prevent further modification to the
reloc tree during merge stage, but since there is no reloc_ctl at all,
we do not need to bother that.
Reported-by: syzbot+283673dbc38527ef9f3d@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/66f6bfa7.050a0220.38ace9.0019.GAE@google.com/
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During an incremental send we may end up sending an invalid clone
operation, for the last extent of a file which ends at an unaligned offset
that matches the final i_size of the file in the send snapshot, in case
the file had its initial size (the size in the parent snapshot) decreased
in the send snapshot. In this case the destination will fail to apply the
clone operation because its end offset is not sector size aligned and it
ends before the current size of the file.
Sending the truncate operation always happens when we finish processing an
inode, after we process all its extents (and xattrs, names, etc). So fix
this by ensuring the file has a valid size before we send a clone
operation for an unaligned extent that ends at the final i_size of the
file. The size we truncate to matches the start offset of the clone range
but it could be any value between that start offset and the final size of
the file since the clone operation will expand the i_size if the current
size is smaller than the end offset. The start offset of the range was
chosen because it's always sector size aligned and avoids a truncation
into the middle of a page, which results in dirtying the page due to
filling part of it with zeroes and then making the clone operation at the
receiver trigger IO.
The following test reproduces the issue:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create a file with a size of 256K + 5 bytes, having two extents, one
# with a size of 128K and another one with a size of 128K + 5 bytes.
last_ext_size=$((128 * 1024 + 5))
xfs_io -f -d -c "pwrite -S 0xab -b 128K 0 128K" \
-c "pwrite -S 0xcd -b $last_ext_size 128K $last_ext_size" \
$MNT/foo
# Another file which we will later clone foo into, but initially with
# a larger size than foo.
xfs_io -f -c "pwrite -S 0xef 0 1M" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap1
# Now resize bar and clone foo into it.
xfs_io -c "truncate 0" \
-c "reflink $MNT/foo" $MNT/bar
btrfs subvolume snapshot -r $MNT/ $MNT/snap2
rm -f /tmp/send-full /tmp/send-inc
btrfs send -f /tmp/send-full $MNT/snap1
btrfs send -p $MNT/snap1 -f /tmp/send-inc $MNT/snap2
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -f /tmp/send-full $MNT
btrfs receive -f /tmp/send-inc $MNT
umount $MNT
Running it before this patch:
$ ./test.sh
(...)
At subvol snap1
At snapshot snap2
ERROR: failed to clone extents to bar: Invalid argument
A test case for fstests will be sent soon.
Reported-by: Ben Millwood <thebenmachine@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAJhrHS2z+WViO2h=ojYvBPDLsATwLbg+7JaNCyYomv0fUxEpQQ@mail.gmail.com/
Fixes: 46a6e10a1ab1 ("btrfs: send: allow cloning non-aligned extent if it ends at i_size")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While running checkpatch.pl against a patch that modifies the
btrfs_qgroup_extent event class, it complained about using a comma instead
of a semicolon:
$ ./scripts/checkpatch.pl qgroups/0003-btrfs-qgroups-remove-bytenr-field-from-struct-btrfs_.patch
WARNING: Possible comma where semicolon could be used
#215: FILE: include/trace/events/btrfs.h:1720:
+ __entry->bytenr = bytenr,
__entry->num_bytes = rec->num_bytes;
total: 0 errors, 1 warnings, 184 lines checked
So replace the comma with a semicolon to silence checkpatch and possibly
other tools. It also makes the code consistent with the rest.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the inception of relocation we have maintained the backref cache
across transaction commits, updating the backref cache with the new
bytenr whenever we COWed blocks that were in the cache, and then
updating their bytenr once we detected a transaction id change.
This works as long as we're only ever modifying blocks, not changing the
structure of the tree.
However relocation does in fact change the structure of the tree. For
example, if we are relocating a data extent, we will look up all the
leaves that point to this data extent. We will then call
do_relocation() on each of these leaves, which will COW down to the leaf
and then update the file extent location.
But, a key feature of do_relocation() is the pending list. This is all
the pending nodes that we modified when we updated the file extent item.
We will then process all of these blocks via finish_pending_nodes, which
calls do_relocation() on all of the nodes that led up to that leaf.
The purpose of this is to make sure we don't break sharing unless we
absolutely have to. Consider the case that we have 3 snapshots that all
point to this leaf through the same nodes, the initial COW would have
created a whole new path. If we did this for all 3 snapshots we would
end up with 3x the number of nodes we had originally. To avoid this we
will cycle through each of the snapshots that point to each of these
nodes and update their pointers to point at the new nodes.
Once we update the pointer to the new node we will drop the node we
removed the link for and all of its children via btrfs_drop_subtree().
This is essentially just btrfs_drop_snapshot(), but for an arbitrary
point in the snapshot.
The problem with this is that we will never reflect this in the backref
cache. If we do this btrfs_drop_snapshot() for a node that is in the
backref tree, we will leave the node in the backref tree. This becomes
a problem when we change the transid, as now the backref cache has
entire subtrees that no longer exist, but exist as if they still are
pointed to by the same roots.
In the best case scenario you end up with "adding refs to an existing
tree ref" errors from insert_inline_extent_backref(), where we attempt
to link in nodes on roots that are no longer valid.
Worst case you will double free some random block and re-use it when
there's still references to the block.
This is extremely subtle, and the consequences are quite bad. There
isn't a way to make sure our backref cache is consistent between
transid's.
In order to fix this we need to simply evict the entire backref cache
anytime we cross transid's. This reduces performance in that we have to
rebuild this backref cache every time we change transid's, but fixes the
bug.
This has existed since relocation was added, and is a pretty critical
bug. There's a lot more cleanup that can be done now that this
functionality is going away, but this patch is as small as possible in
order to fix the problem and make it easy for us to backport it to all
the kernels it needs to be backported to.
Followup series will dismantle more of this code and simplify relocation
drastically to remove this functionality.
We have a reproducer that reproduced the corruption within a few minutes
of running. With this patch it survives several iterations/hours of
running the reproducer.
Fixes: 3fd0a5585eb9 ("Btrfs: Metadata ENOSPC handling for balance")
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
NOCOW writes do not generate stripe_extent entries in the RAID stripe
tree, as the RAID stripe-tree feature initially was designed with a
zoned filesystem in mind and on a zoned filesystem, we do not allow NOCOW
writes. But the RAID stripe-tree feature is independent from the zoned
feature, so we must also do NOCOW writes for RAID stripe-tree filesystems.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only user (the mesa gallium driver) is already assuming explicit
synchronization and doing the export/import dance on shared BOs. The
only reason we were registering ourselves as writers on external BOs
is because Xe, which was the reference back when we developed Panthor,
was doing so. Turns out Xe was wrong, and we really want bookkeep on
all registered fences, so userspace can explicitly upgrade those to
read/write when needed.
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905070155.3254011-1-boris.brezillon@collabora.com
