There is a requirement to make memory APIs independent of the ffa_device.
One of the use-case is to have a common memory driver that manages the
memory for all the ffa_devices. That common memory driver won't be a
ffa_driver or won't have any ffa_device associated with it. So having
these memory APIs accessible without a ffa_device is needed and should
be possible as most of these are handled by the partition manager(SPM
or hypervisor).
Drop the ffa_device argument to the memory APIs and make them ffa_device
independent.
Link: https://lore.kernel.org/r/20220907145240.1683088-7-sudeep.holla@arm.com
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, the ffa_dev->mode_32bit is use to detect if the native 64-bit
or 32-bit versions of FF-A ABI needs to be used. However for the FF-A
memory ABIs, it is not dependent on the ffa_device(i.e. the partition)
itself, but the partition manager(SPM).
So, the FFA_FEATURES can be use to detect if the native 64bit ABIs are
supported or not and appropriate calls can be made based on that.
Use FFA_FEATURES to detect if native versions of MEM_LEND or MEM_SHARE
are implemented and make of the same to use native memory ABIs later on.
Link: https://lore.kernel.org/r/20220907145240.1683088-6-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add support for FFA_FEATURES to discover properties supported at the
FF-A interface. This interface can be used to query:
- If an FF-A interface is implemented by the component at the higher EL,
- If an implemented FF-A interface also implements any optional features
described in its interface definition, and
- Any implementation details exported by an implemented FF-A interface
as described in its interface definition.
Link: https://lore.kernel.org/r/20220907145240.1683088-5-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The only user of this exported ffa_dev_ops_get() was OPTEE driver which
now uses ffa_dev->ops directly, there are no other users for this.
Also, since any ffa driver can use ffa_dev->ops directly, there will be
no need for ffa_dev_ops_get(), so just remove ffa_dev_ops_get().
Link: https://lore.kernel.org/r/20220907145240.1683088-4-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently ffa_dev_ops_get() is the way to fetch the ffa_dev_ops pointer.
It checks if the ffa_dev structure pointer is valid before returning the
ffa_dev_ops pointer.
Instead, the pointer can be made part of the ffa_dev structure and since
the core driver is incharge of creating ffa_device for each identified
partition, there is no need to check for the validity explicitly if the
pointer is embedded in the structure.
Add the pointer to the ffa_dev_ops in the ffa_dev structure itself and
initialise the same as part of creation of the device.
Link: https://lore.kernel.org/r/20220907145240.1683088-2-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The ffa core driver currently assigns its own driver information
to individual ffa device driver_data which is wrong. Firstly, it leaks
this core driver information to individual ffa_device and hence to
ffa_driver. Secondly the ffa_device driver_data is for use by individual
ffa_driver and not for this core driver managing all those devices.
Link: https://lore.kernel.org/r/20220429113946.2087145-2-sudeep.holla@arm.com
Fixes: d0c0bce831 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
While we pass uuid_null intentionally to ffa_partition_probe in
ffa_setup_partitions to get the count of the partitions, it must not be
uuid_null in ffa_partition_info_get which is used by the ffa_drivers
to fetch the specific partition info passing the UUID of the partition.
Fix ffa_partition_info_get by passing the received uuid down to
ffa_partition_probe so that the correct partition information is fetched.
Link: https://lore.kernel.org/r/20220429113946.2087145-1-sudeep.holla@arm.com
Fixes: d0c0bce831 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions")
Reported-by: Arunachalam Ganapathy <arunachalam.ganapathy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fix the handling of MEM_FRAG_TX/RX SMCs when the full memory descriptor
does not fit in a single innovation of a memory sharing request.
The current implementation expects a FFA_MEM_SHARE/FFA_MEM_LEND
call to always receive a FFA_SUCCESS response, however in the
case where a full descriptor does not fit inside the partitions
TX buffer, the call can instead complete with a FFA_MEM_FRAG_RX SMC
to request the next part of the descriptor to be transmitted.
Similarly a FFA_MEM_FRAG_TX call currently only expects
FFA_MEM_FRAG_RX as a response, however once the full descriptor
has been transmitted the FFA_SUCCESS ABI will be used to indicate
successful transmission.
Update the existing code to match the expected behaviour.
Link: https://lore.kernel.org/r/20220426121219.1801601-1-marc.bonnici@arm.com
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The newly added ffa_compatible_version_find() function causes a
build warning because of a variable that is never used:
drivers/firmware/arm_ffa/driver.c:180:6: error: unused variable 'compat_version' [-Werror,-Wunused-variable]
u32 compat_version;
Link: https://lore.kernel.org/r/20211026083400.3444946-1-arnd@kernel.org
Fixes: 8e3f9da608 ("firmware: arm_ffa: Handle compatibility with different firmware versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As part of the FF-A spec, an endpoint is allowed to transfer access of,
or lend, a memory region to one or more borrowers.
Extend the existing memory sharing implementation to support
FF-A MEM_LEND functionality and expose this to other kernel drivers.
Note that upon a successful MEM_LEND request the caller must ensure that
the memory region specified is not accessed until a successful
MEM_RECALIM call has been made. On systems with a hypervisor present
this will been enforced, however on systems without a hypervisor the
responsibility falls to the calling kernel driver to prevent access.
Link: https://lore.kernel.org/r/20211015165742.2513065-1-marc.bonnici@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Marc Bonnici <marc.bonnici@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The driver currently just support v1.0 of Arm FFA specification. It also
expects the firmware implementation to match the same and bail out if it
doesn't match. This is causing issue when running with higher version of
firmware implementation(e.g. v1.1 which will released soon).
In order to support compatibility with different firmware versions, let
us add additional checks and find the compatible version the driver can
work with.
Link: https://lore.kernel.org/r/20211013091127.990992-1-sudeep.holla@arm.com
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The ffa_linux_errmap buffer access index is supposed to range from 0-8
but it ranges from 1-9 instead. It reads one element out of bounds. It
also changes the success into -EINVAL though ffa_to_linux_errno is never
used in case of success, it is expected to work for success case too.
It is slightly confusing code as the negative of the error code
is used as index to the buffer. Fix it by negating it at the start and
make it more readable.
Link: https://lore.kernel.org/r/20210707134739.1869481-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
clang produces the following warning:
drivers/firmware/arm_ffa/driver.c:123: warning: expecting
prototype for FF(). Prototype was for FFA_PAGE_SIZE() instead
This comment starts with '/**', but isn't a kernel-doc comment.
Refer Documentation/doc-guide/kernel-doc.rst
Fix the same by removing the kernel-doc style comment here.
Link: https://lore.kernel.org/r/20210622162202.3485866-1-sudeep.holla@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Most of the MEM_* APIs share the same parameters, so they can be
generalised. Currently only MEM_SHARE is implemented and the user space
interface for that is not added yet.
Link: https://lore.kernel.org/r/20210521151033.181846-6-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Parse the FFA nodes from the device-tree and register all the partitions
whose services will be used in the kernel.
In order to also enable in-kernel users of FFA interface, let us add
simple set of operations for such devices.
The in-kernel users are registered without the character device interface.
Link: https://lore.kernel.org/r/20210521151033.181846-5-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This just add a basic driver that sets up the transport(e.g. SMCCC),
checks the FFA version implemented, get the partition ID for self and
sets up the Tx/Rx buffers for communication.
Link: https://lore.kernel.org/r/20210521151033.181846-3-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
