When CONFIG_BUILTIN_MODULE_RANGES is enabled, the modules.builtin.ranges
file should be installed in the module install location.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The modules.builtin.ranges offset range data for builtin modules is
generated at compile time based on the list of built-in modules and
the vmlinux.map and vmlinux.o.map linker maps. This data can be used
to determine whether a symbol at a particular address belongs to
module code that was configured to be compiled into the kernel proper
as a built-in module (rather than as a standalone module).
This patch adds a script that uses the generated modules.builtin.ranges
data to annotate the symbols in the System.map with module names if
their address falls within a range that belongs to one or more built-in
modules.
It then processes the vmlinux.map (and if needed, vmlinux.o.map) to
verify the annotation:
- For each top-level section:
- For each object in the section:
- Determine whether the object is part of a built-in module
(using modules.builtin and the .*.cmd file used to compile
the object as suggested in [0])
- For each symbol in that object, verify that the built-in
module association (or lack thereof) matches the annotation
given to the symbol.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Create file module.builtin.ranges that can be used to find where
built-in modules are located by their addresses. This will be useful for
tracing tools to find what functions are for various built-in modules.
The offset range data for builtin modules is generated using:
- modules.builtin: associates object files with module names
- vmlinux.map: provides load order of sections and offset of first member
per section
- vmlinux.o.map: provides offset of object file content per section
- .*.cmd: build cmd file with KBUILD_MODFILE
The generated data will look like:
.text 00000000-00000000 = _text
.text 0000baf0-0000cb10 amd_uncore
.text 0009bd10-0009c8e0 iosf_mbi
...
.text 00b9f080-00ba011a intel_skl_int3472_discrete
.text 00ba0120-00ba03c0 intel_skl_int3472_discrete intel_skl_int3472_tps68470
.text 00ba03c0-00ba08d6 intel_skl_int3472_tps68470
...
.data 00000000-00000000 = _sdata
.data 0000f020-0000f680 amd_uncore
For each ELF section, it lists the offset of the first symbol. This can
be used to determine the base address of the section at runtime.
Next, it lists (in strict ascending order) offset ranges in that section
that cover the symbols of one or more builtin modules. Multiple ranges
can apply to a single module, and ranges can be shared between modules.
The CONFIG_BUILTIN_MODULE_RANGES option controls whether offset range data
is generated for kernel modules that are built into the kernel image.
How it works:
1. The modules.builtin file is parsed to obtain a list of built-in
module names and their associated object names (the .ko file that
the module would be in if it were a loadable module, hereafter
referred to as <kmodfile>). This object name can be used to
identify objects in the kernel compile because any C or assembler
code that ends up into a built-in module will have the option
-DKBUILD_MODFILE=<kmodfile> present in its build command, and those
can be found in the .<obj>.cmd file in the kernel build tree.
If an object is part of multiple modules, they will all be listed
in the KBUILD_MODFILE option argument.
This allows us to conclusively determine whether an object in the
kernel build belong to any modules, and which.
2. The vmlinux.map is parsed next to determine the base address of each
top level section so that all addresses into the section can be
turned into offsets. This makes it possible to handle sections
getting loaded at different addresses at system boot.
We also determine an 'anchor' symbol at the beginning of each
section to make it possible to calculate the true base address of
a section at runtime (i.e. symbol address - symbol offset).
We collect start addresses of sections that are included in the top
level section. This is used when vmlinux is linked using vmlinux.o,
because in that case, we need to look at the vmlinux.o linker map to
know what object a symbol is found in.
And finally, we process each symbol that is listed in vmlinux.map
(or vmlinux.o.map) based on the following structure:
vmlinux linked from vmlinux.a:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
vmlinux linked from vmlinux.o:
vmlinux.map:
<top level section>
<included section> -- might be same as top level section)
vmlinux.o -- need to use vmlinux.o.map
<symbol> -- ignored
...
vmlinux.o.map:
<section>
<object> -- built-in association known
<symbol> -- belongs to module(s) object belongs to
...
3. As sections, objects, and symbols are processed, offset ranges are
constructed in a straight-forward way:
- If the symbol belongs to one or more built-in modules:
- If we were working on the same module(s), extend the range
to include this object
- If we were working on another module(s), close that range,
and start the new one
- If the symbol does not belong to any built-in modules:
- If we were working on a module(s) range, close that range
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In order to create the file at build time, modules.builtin.ranges, that
contains the range of addresses for all built-in modules, there needs to
be a way to identify what code is compiled into modules.
To identify what code is compiled into modules during a kernel build,
one can look for the presence of the -DKBUILD_MODFILE and -DKBUILD_MODNAME
options in the compile command lines. A simple grep in .*.cmd files for
those options is sufficient for this.
Unfortunately, these options are only passed when compiling C source files.
Various modules also include objects built from assembler source, and these
options are not passed in that case.
Adding $(modfile_flags) to modkern_aflags (similar to modkern_cflags), and
adding $(modname_flags) to a_flags (similar to c_flags) makes it possible
to identify which objects are compiled into modules for both C and
assembler source files. While KBUILD_MODFILE is sufficient to generate
the modules ranges data, KBUILD_MODNAME is passed as well for consistency
with the C source code case.
Signed-off-by: Kris Van Hees <kris.van.hees@oracle.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Sam James <sam@gentoo.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When building the Linux kernel on an aarch64 macOS based host, if we don't
specify a value for ARCH when invoking make, we default to arm and thus
multi_v7_defconfig rather than the expected arm64 and arm64's defconfig.
This is because subarch.include invokes `uname -m` which on MacOS hosts
evaluates to `arm64` but on Linux hosts evaluates to `aarch64`,
This allows us to build ARCH=arm64 natively on macOS (as in ARCH need
not be specified on an aarch64-based system).
Avoid matching arm64 by excluding it from the arm.* sed expression.
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Suggested-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/Makefile.lib is included not only from scripts/Makefile.build
but also from scripts/Makefile.{modfinal,package,vmlinux,vmlinux_o},
where DT build rules are not required.
Split the DT build rules out to scripts/Makefile.dtbs, and include it
only when necessary.
While I was here, I added $(DT_TMP_SCHEMA) as a prerequisite of
$(multi-dtb-y).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Flex and Bison are used only for host programs. Move their intermediate
target processing from scripts/Makefile.build to scripts/Makefile.host.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Various information about modules is compiled into the info sections.
For that a dedicated .mod.c file is generated by modpost for each module
and then linked into the module.
However most of the information in the .mod.c is the same for all
modules, internal and external.
Split the shared information into a dedicated source file that is
compiled once and then linked into all modules.
This avoids frequent rebuilds for all .mod.c files when using
CONFIG_LOCALVERSION_AUTO because the local version ends up in .mod.c
through UTS_RELEASE and VERMAGIC_STRING.
The modules are still relinked in this case.
The code is also easier to maintain as it's now in a proper source file
instead of an inline string literal.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Remove the recently-added dependency on the truncate program for
building the kernel. truncate is not available when building the kernel
under Yocto. It could be added, but it would be better just to avoid
the unnecessary dependency.
Fixes: 1472464c6248 ("kbuild: avoid scripts/kallsyms parsing /dev/null")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add a new debug package to the PKGBUILD for the pacman-pkg target. The
debug package includes the non-stripped vmlinux file with debug symbols
for kernel debugging and profiling. The file is installed at
/usr/src/debug/${pkgbase}, with a symbolic link at
/usr/lib/modules/$(uname -r)/build/vmlinux. The debug package is built
by default.
Signed-off-by: Jose Fernandez <jose.fernandez@linux.dev>
Reviewed-by: Peter Jung <ptr1337@cachyos.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are a few lines in the kbuild-language.rst document which
obliquely reference the behavior of config options without prompts.
But there is nothing in the obvious location that explicitly calls
out that users cannot edit config options unless they have a prompt.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 5ce2176b81f7 ("genksyms: adjust the output format to modpost")
stopped generating *.symversions files.
Remove the left-over from the .gitignore file and the 'clean' rule.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
With commit cda5f94e88b4 ("modpost: avoid using the alias attribute"),
only two log levels remain: LOG_WARN and LOG_ERROR. Simplify this by
making it a boolean variable.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
objtree is defined and exported by the top-level Makefile. I prefer
not to override it.
There is no need to pass the absolute path of objtree. PKGBUILD can
detect it by itself.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christian Heusel <christian@heusel.eu>
All build and package functions share the following commands:
export MAKEFLAGS="${KBUILD_MAKEFLAGS}"
cd "${objtree}"
Factor out the common code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christian Heusel <christian@heusel.eu>
Introduce the PACMAN_EXTRAPACKAGES variable in PKGBUILD to allow users
to specify which additional packages are built by the pacman-pkg target.
Previously, the api-headers package was always included, and the headers
package was included only if CONFIG_MODULES=y. With this change, both
headers and api-headers packages are included by default. Users can now
control this behavior by setting PACMAN_EXTRAPACKAGES to a
space-separated list of desired extra packages or leaving it empty to
exclude all.
For example, to build only the base package without extras:
make pacman-pkg PACMAN_EXTRAPACKAGES=""
Signed-off-by: Jose Fernandez <jose.fernandez@linux.dev>
Reviewed-by: Peter Jung <ptr1337@cachyos.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Christian Heusel <christian@heusel.eu>
Tested-by: Christian Heusel <christian@heusel.eu>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This commit improves the section mismatch warning format when there is
no suitable symbol name to print.
The section mismatch warning prints the reference source in the form
of <symbol_name>+<offset> and the reference destination in the form
of <symbol_name>.
However, there are some corner cases where <symbol_name> becomes
"(unknown)", as reported in commit 23dfd914d2bf ("modpost: fix null
pointer dereference").
In such cases, it is better to print the symbol address.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When malloc() fails, there is not much userspace programs can do.
xmalloc() is useful to bail out on a memory allocation failure.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When malloc() or realloc() fails, there is not much userspace programs
can do. xmalloc() and xrealloc() are useful to bail out on a memory
allocation failure.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
P_SYMBOL is a pseudo property that was previously used for data linking
purposes.
It is no longer used except for debug prints. Remove it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I believe its last usage was in the following code:
if (prop == NULL)
prop = stack->sym->prop;
This code was previously used to print the file name and line number of
associated symbols in sym_check_print_recursive(), which was removed by
commit 9d0d26604657 ("kconfig: recursive checks drop file/lineno").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit ca4c74ba306e ("kconfig: remove P_CHOICE property"),
menu_finalize() no longer calls menu_add_symbol(). No function
references cur_filename or cur_lineno after yyparse().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts the following commits:
- 236dec051078 ("kconfig: tinyconfig: provide whole choice blocks to
avoid warnings")
- b0f269728ccd ("x86/config: Fix warning for 'make ARCH=x86_64
tinyconfig'")
Since commit f79dc03fe68c ("kconfig: refactor choice value calculation"),
it is no longer necessary to disable the remaining options in choice
blocks.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Parallel execution is supported by GNU Make:
$ make -j<N> modules_install
It is questionable to enable multithreading within each zstd process
by default.
If you still want to do it, you can use the environment variable:
$ ZSTD_NBTHREADS=<N> make modules_install
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Commit 3f1b0e1f2875 (".gitignore update") added *.orig and *.rej
patterns to .gitignore in v2.6.23. The commit message didn't give a
rationale. Later on, commit 1f5d3a6b6532 ("Remove *.rej pattern from
.gitignore") removed the *.rej pattern in v2.6.26, on the rationale that
*.rej files indicated something went really wrong and should not be
ignored.
The *.rej files are now shown by `git status`, which helps located
conflicts when applying patches and lowers the probability that they
will go unnoticed. It is however still easy to overlook the *.orig files
which slowly polute the source tree. That's not as big of a deal as not
noticing a conflict, but it's still not nice.
Drop the *.orig pattern from .gitignore to avoid this and help keep the
source tree clean.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[masahiroy@kernel.org:
I do not have a strong opinion about this. Perhaps some people may have
a different opinion.
If you are someone who wants to ignore *.orig, it is likely you would
want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore
would be more suitable for your needs. gitignore(5) suggests, "Patterns
which a user wants Git to ignore in all situations generally go into a
file specified by core.excludesFile in the user's ~/.gitconfig".
Please note that you cannot do the opposite; if *.orig is ignored by
the project's .gitignore, you cannot override the decision because
$XDG_CONFIG_HOME/git/ignore has a lower priority.
If *.orig is sitting on the fence, I'd leave it to the users. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A long standing issue in the upstream kernel packaging is that the
linux-headers package is not cross-compiled.
For example, you can cross-build Debian packages for arm64 by running
the following command:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- bindeb-pkg
However, the generated linux-headers-*_arm64.deb is useless because the
host programs in it were built for your build machine architecture
(likely x86), not arm64.
The Debian kernel maintains its own Makefiles to cross-compile host
tools without relying on Kbuild. [1]
Instead of adding such full custom Makefiles, this commit adds a small
piece of code to cross-compile host programs located under the scripts/
directory.
A straightforward solution is to pass HOSTCC=${CROSS_COMPILE}gcc, but it
would also cross-compile scripts/basic/fixdep, which needs to be native
to process the if_changed_dep macro. (This approach may work under some
circumstances; you can execute foreign architecture programs with the
help of binfmt_misc because Debian systems enable CONFIG_BINFMT_MISC,
but it would require installing QEMU and libc for that architecture.)
A trick is to use the external module build (KBUILD_EXTMOD=), which
does not rebuild scripts/basic/fixdep. ${CC} needs to be able to link
userspace programs (CONFIG_CC_CAN_LINK=y).
There are known limitations:
- GCC plugins
It would possible to rebuild GCC plugins for the target architecture
by passing HOSTCXX=${CROSS_COMPILE}g++ with necessary packages
installed, but gcc on the installed system emits
"cc1: error: incompatible gcc/plugin versions".
- objtool and resolve_btfids
These are built by the tools build system. They are not covered by
the current solution. The resulting linux-headers package is broken
if CONFIG_OBJTOOL or CONFIG_DEBUG_INFO_BTF is enabled.
I only tested this with Debian, but it should work for other package
systems as well.
[1]: https://salsa.debian.org/kernel-team/linux/-/blob/debian/6.9.9-1/debian/rules.real#L586
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Endianness is currently detected on compile-time, but we can defer this
until run-time. This change avoids re-executing scripts/mod/mk_elfconfig
even if modpost in the linux-headers package needs to be rebuilt for a
foreign architecture.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
HOST_ELFCLASS is output to elfconfig.h, but it is not used in modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
-----BEGIN PGP SIGNATURE-----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=l4NV
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix
-----BEGIN PGP SIGNATURE-----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=LTM8
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs
Push bcachefs fixes from Kent Overstreet:
"The data corruption in the buffered write path is troubling; inode
lock should not have been able to cause that...
- Fix a rare data corruption in the rebalance path, caught as a nonce
inconsistency on encrypted filesystems
- Revert lockless buffered write path
- Mark more errors as autofix"
* tag 'bcachefs-2024-08-21' of https://github.com/koverstreet/bcachefs:
bcachefs: Mark more errors as autofix
bcachefs: Revert lockless buffered IO path
bcachefs: Fix bch2_extents_match() false positive
bcachefs: Fix failure to return error in data_update_index_update()
errors that are known to always be safe to fix should be autofix: this
should be most errors even at this point, but that will need some
thorough review.
note that errors are still logged in the superblock, so we'll still know
that they happened.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a report of data corruption on nixos when building installer
images.
https://github.com/NixOS/nixpkgs/pull/321055#issuecomment-2184131334
It seems that writes are being dropped, but only when issued by QEMU,
and possibly only in snapshot mode. It's undetermined if it's write
calls are being dropped or dirty folios.
Further testing, via minimizing the original patch to just the change
that skips the inode lock on non appends/truncates, reveals that it
really is just not taking the inode lock that causes the corruption: it
has nothing to do with the other logic changes for preserving write
atomicity in corner cases.
It's also kernel config dependent: it doesn't reproduce with the minimal
kernel config that ktest uses, but it does reproduce with nixos's distro
config. Bisection the kernel config initially pointer the finger at page
migration or compaction, but it appears that was erroneous; we haven't
yet determined what kernel config option actually triggers it.
Sadly it appears this will have to be reverted since we're getting too
close to release and my plate is full, but we'd _really_ like to fully
debug it.
My suspicion is that this patch is exposing a preexisting bug - the
inode lock actually covers very little in IO paths, and we have a
different lock (the pagecache add lock) that guards against races with
truncate here.
Fixes: 7e64c86cdc6c ("bcachefs: Buffered write path now can avoid the inode lock")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull misc fixes from Guenter Roeck.
These are fixes for regressions that Guenther has been reporting, and
the maintainers haven't picked up and sent in. With rc6 fairly imminent,
I'm taking them directly from Guenter.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
apparmor: fix policy_unpack_test on big endian systems
Revert "MIPS: csrc-r4k: Apply verification clocksource flags"
microblaze: don't treat zero reserved memory regions as error
- set the direction of the wlan-enable GPIO to output after requesting
it as-is
-----BEGIN PGP SIGNATURE-----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=VM4v
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing fix from Bartosz Golaszewski:
"A follow-up fix for the power sequencing subsystem. It turned out the
previous fix for this driver was incomplete and broke the WLAN support
on some platforms. This addresses the issue.
- set the direction of the wlan-enable GPIO to output after
requesting it as-is"
* tag 'pwrseq-fixes-for-v6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: set the wlan-enable GPIO to output
Commit a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO
as-is") broke WLAN on boards on which the wlan-enable GPIO enabling the
wifi module isn't in output mode by default. We need to set direction to
output while retaining the value that was already set to keep the ath
module on if it's already started.
Fixes: a9aaf1ff88a8 ("power: sequencing: request the WLAN enable GPIO as-is")
Link: https://lore.kernel.org/r/20240823115500.37280-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZtNVTw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqWwCgmITg5Owdigw+ejnkLJ4Q/CHYfRkAoLh7nkcm
kaX7IqZLgVDr4rvgVcmR
=azoE
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.11-rc6. Included in here are:
- dwc3 driver fixes for reported issues
- MAINTAINER file update, marking a driver as unsupported :(
- cdnsp driver fixes
- USB gadget driver fix
- USB sysfs fix
- other tiny fixes
- new device ids for usb serial driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add MeiG Smart SRM825L
usb: cdnsp: fix for Link TRB with TC
usb: dwc3: st: add missing depopulate in probe error path
usb: dwc3: st: fix probed platform device ref count on probe error path
usb: dwc3: ep0: Don't reset resource alloc flag (including ep0)
usb: core: sysfs: Unmerge @usb3_hardware_lpm_attr_group in remove_power_attributes()
usb: typec: fsa4480: Relax CHIP_ID check
usb: dwc3: xilinx: add missing depopulate in probe error path
usb: dwc3: omap: add missing depopulate in probe error path
dt-bindings: usb: microchip,usb2514: Fix reference USB device schema
usb: gadget: uvc: queue pump work in uvcg_video_enable()
cdc-acm: Add DISABLE_ECHO quirk for GE HealthCare UI Controller
usb: cdnsp: fix incorrect index in cdnsp_get_hw_deq function
usb: dwc3: core: Prevent USB core invalid event buffer address access
MAINTAINERS: Mark UVC gadget driver as orphan
Minor fixes only. The sd.c one ignores a sync cache request if format
is in progress which can happen if formatting a drive across
suspend/resume.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZtM61CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZ+yAQDz47pp
ZEr9bOMueiIYs+ZpmK1KRBHviFApXr9JJGzoHAD/WsUN43+5+y12QhGWSA0/M4qo
Tog2K3HXvb4kIsDoXEg=
=n2gm
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Minor fixes only.
The sd.c one ignores a sync cache request if format is in progress
which can happen if formatting a drive across suspend/resume"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progress
scsi: aacraid: Fix double-free on probe failure
scsi: lpfc: Fix overflow build issue
- One more write delegation fix
-----BEGIN PGP SIGNATURE-----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=uoNK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- One more write delegation fix
* tag 'nfsd-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix nfsd4_deleg_getattr_conflict in presence of third party lease
* Do not call out v1 inodes with non-zero di_nlink field as being corrupt.
* Change xfs_finobt_count_blocks() to count "free inode btree" blocks rather
than "inode btree" blocks.
* Don't report the number of trimmed bytes via FITRIM because the underlying
storage isn't required to do anything and failed discard IOs aren't
reported to the caller anyway.
* Fix incorrect setting of rm_owner field in an rmap query.
* Report missing disk offset range in an fsmap query.
* Obtain m_growlock when extending realtime section of the filesystem.
* Reset rootdir extent size hint after extending realtime section of the
filesystem.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZs3OYgAKCRAH7y4RirJu
9OF/AP9MXSSmBHmTfpqJZbKCI9j+EvAGyucbITi32ZBnbnNnKgEAr5FrueGcKS98
H/FxMeNbSWZp0s5hUYsXsACtdo75YgE=
=prEp
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Do not call out v1 inodes with non-zero di_nlink field as being
corrupt
- Change xfs_finobt_count_blocks() to count "free inode btree" blocks
rather than "inode btree" blocks
- Don't report the number of trimmed bytes via FITRIM because the
underlying storage isn't required to do anything and failed discard
IOs aren't reported to the caller anyway
- Fix incorrect setting of rm_owner field in an rmap query
- Report missing disk offset range in an fsmap query
- Obtain m_growlock when extending realtime section of the filesystem
- Reset rootdir extent size hint after extending realtime section of
the filesystem
* tag 'xfs-6.11-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reset rootdir extent size hint after growfsrt
xfs: take m_growlock when running growfsrt
xfs: Fix missing interval for missing_owner in xfs fsmap
xfs: use XFS_BUF_DADDR_NULL for daddrs in getfsmap code
xfs: Fix the owner setting issue for rmap query in xfs fsmap
xfs: don't bother reporting blocks trimmed via FITRIM
xfs: xfs_finobt_count_blocks() walks the wrong btree
xfs: fix folio dirtying for XFILE_ALLOC callers
xfs: fix di_onlink checking for V1/V2 inodes
There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the
newly added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well
as runtime problems in the tzmem and scm firmware, the USB Type-C
driver, and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is proportional
to the number of supported machines. This includes both warning fixes
and correctness for the 64-bit i.MX9, i.MX8 and layerscape platforms,
as well as a single fix for a 32-bit i.MX6 based board.
The other changes are the usual minor changes, including an update to the
MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs (risc-v).
-----BEGIN PGP SIGNATURE-----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=tK5m
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where timeout condition is incorrectly reported for
all extended Cypress commands.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZtI2cgAKCRBAj56VGEWX
nJGNAQCYR/VQOtGBoIo4/0VdxxH6qTuLu7XhWbBdzgx8ee6t6gD/Rj94mEpOh12V
JEd3MiDdEtQt5KwwdkzUyiHYJ0x1WAw=
=PzXA
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
- a fix for Cypress PS/2 touchpad for regression introduced in 6.11
merge window where a timeout condition is incorrectly reported for
all extended Cypress commands
* tag 'input-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cypress_ps2 - fix waiting for command response
-----BEGIN PGP SIGNATURE-----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=+JAO
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as PCI native host bridge and endpoint
driver reviewer (Manivannan Sadhasivam)
- Disable MHI RAM data parity error interrupt for qcom SA8775P SoC to
work around hardware erratum that causes a constant stream of
interrupts (Manivannan Sadhasivam)
- Don't try to fall back to qcom Operating Performance Points (OPP)
support unless the platform actually supports OPP (Manivannan
Sadhasivam)
- Add imx@lists.linux.dev mailing list to MAINTAINERS for NXP
layerscape and imx6 PCI controller drivers (Frank Li)
* tag 'pci-v6.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: PCI: Add NXP PCI controller mailing list imx@lists.linux.dev
PCI: qcom: Use OPP only if the platform supports it
PCI: qcom-ep: Disable MHI RAM data parity error interrupt for SA8775P SoC
MAINTAINERS: Add Manivannan Sadhasivam as Reviewer for PCI native host bridge and endpoint drivers
-----BEGIN PGP SIGNATURE-----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=Wgk4
-----END PGP SIGNATURE-----
Merge tag 'block-6.11-20240830' of git://git.kernel.dk/linux
Pull block fix from Jens Axboe:
"Fix for a single regression for WRITE_SAME introduced in the 6.11
merge window"
* tag 'block-6.11-20240830' of git://git.kernel.dk/linux:
block: fix detection of unsupported WRITE SAME in blkdev_issue_write_zeroes
-----BEGIN PGP SIGNATURE-----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=Zabp
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- A fix for a regression that happened in 6.11 merge window, where the
copying of iovecs for compat mode applications got broken for certain
cases.
- Fix for a bug introduced in 6.10, where if using recv/send bundles
with classic provided buffers, the recv/send would fail to set the
right iovec count. This caused 0 byte send/recv results. Found via
code coverage testing and writing a test case to exercise it.
* tag 'io_uring-6.11-20240830' of git://git.kernel.dk/linux:
io_uring/kbuf: return correct iovec count from classic buffer peek
io_uring/rsrc: ensure compat iovecs are copied correctly
