pci_epf_type_add_cfs() should not be called with an unbound EPF device,
that is, an epf device with epf->driver not set. For such case, replace the
NULL return in pci_epf_type_add_cfs() with a clear ERR_PTR(-ENODEV) pointer
error return.
Link: https://lore.kernel.org/r/20230515074348.595704-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivami <manivannan.sadhasivam@linaro.org>
In pci_epf_test_init_dma_chan() epf_test->dma_chan_rx is assigned from
dma_request_channel() with DMA_DEV_TO_MEM as filter.dma_mask.
However, in pci_epf_test_data_transfer() if the dir is DMA_DEV_TO_MEM,
epf->dma_chan_rx should be used but instead we are using
epf_test->dma_chan_tx.
Fix it.
Link: https://lore.kernel.org/r/20230412063447.2841177-1-yoshihiro.shimoda.uh@renesas.com
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
In pci_epf_test_print_rate(), instead of open coding a reduction loop to
allow for a division by a 32-bits ns value, simply use div64_u64() to
calculate the transfer rate. To match the printed unit of KB/s, this
calculation divides the rate by 1000 instead of 1024 (that would be KiB/s
unit).
Change the format of the results printed by pci_epf_test_print_rate() to be
more compact without the double new line. Also use dev_info() instead of
pr_info().
Link: https://lore.kernel.org/r/20230415023542.77601-14-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
There is no need to have each read, write and copy test functions check
for the FLAG_USE_DMA flag against the DMA support status indicated by
epf_test->dma_supported. Move this test to the command handler function
pci_epf_test_cmd_handler() to check once for all cases.
Link: https://lore.kernel.org/r/20230415023542.77601-13-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Each of the test functions pci_epf_test_write(), pci_epf_test_read() and
pci_epf_test_copy() return an int result which is used by
pci_epf_test_cmd_handler() to set a success or error bit in the request
status.
In the spirit of keeping the processing of each test case self-contained
within its own test function, move the request status field update from
pci_epf_test_cmd_handler() to each of these test functions and change these
functions declaration to returning void.
Link: https://lore.kernel.org/r/20230415023542.77601-12-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Command codes are never combined together as flags into a single value.
Thus we can replace the series of "if" tests in pci_epf_test_cmd_handler()
with a cleaner switch-case statement. This also allows checking that we
got a valid command and print an error message if we did not.
Link: https://lore.kernel.org/r/20230415023542.77601-11-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
The pci-epf-test driver uses the test register BAR memory directly to get
and execute a test registers set by the RC side and defined using a struct
pci_epf_test_reg. This direct use relies on using the register BAR address
as a pointer to a struct pci_epf_test_reg to execute the test case and to
send back the test result through the status field of struct
pci_epf_test_reg. In practice, the status field is always updated before an
interrupt is raised in pci_epf_test_raise_irq(), to ensure that the RC side
sees the updated status when receiving an interrupt.
However, such assignment direct access does not ensure that changes to the
status register make it to memory, and so visible to the host, before an
interrupt is raised, thus potentially resulting in the RC host not seeing
the correct status result for a test.
Avoid this potential problem by using READ_ONCE()/WRITE_ONCE() when
accessing the command and status fields of a pci_epf_test_reg structure.
This ensure that a test start (pci_epf_test_cmd_handler() function) and
completion (with the function pci_epf_test_raise_irq()) achieve a correct
synchronization with the MMIO register accesses on the RC host.
Link: https://lore.kernel.org/r/20230415023542.77601-10-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
For the commands COMMAND_RAISE_LEGACY_IRQ, COMMAND_RAISE_MSI_IRQ and
COMMAND_RAISE_MSIX_IRQ, the function pci_epf_test_cmd_handler()
sets the STATUS_IRQ_RAISED status flag and calls the epc function
pci_epc_raise_irq() directly. However, this is also exactly what the
pci_epf_test_raise_irq() function does. Avoid duplicating these
operations by directly using pci_epf_test_raise_irq() for the IRQ test
commands. It is OK to do so as the host side endpoint test driver always
set the correct IRQ type for the IRQ test commands.
At the same time, move the IRQ number check done for the
COMMAND_RAISE_MSI_IRQ and COMMAND_RAISE_MSIX_IRQ commands
to pci_epf_test_raise_irq(), to also check the IRQ number requested
by the host for other test commands.
This significantly simplifies pci_epf_test_cmd_handler().
Link: https://lore.kernel.org/r/20230415023542.77601-9-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Change the interface of the function pci_epf_test_raise_irq() to directly
pass a pointer to the struct pci_epf_test_reg defining the test being
executed. This avoids the need for grabbing this pointer using the register
BAR address and simplifies the call sites as the IRQ type and IRQ numbers
do not have to be passed as arguments.
Link: https://lore.kernel.org/r/20230415023542.77601-8-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
The function pci_epf_test_cmd_handler() uses the register BAR address as a
pointer to a struct pci_epf_test_reg to determine the command sent by the
host and to execute the test function accordingly. There is no need for
doing this assignment again in each of the read, write and copy test
functions. We can simply pass the reg pointer as an argument to the
functions pci_epf_test_write(), pci_epf_test_read() and
pci_epf_test_copy().
Link: https://lore.kernel.org/r/20230415023542.77601-7-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Instead of an open coded call to the tx_submit() operation of struct
dma_async_tx_descriptor, use the helper function dmaengine_submit().
No functional change is introduced with this.
Link: https://lore.kernel.org/r/20230415023542.77601-6-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
pci_epf_test_data_transfer() and pci_epf_test_dma_callback() are not
handling DMA transfer completion correctly, leading to completion
notifications to the RC side that are too early. This problem can be
detected when the RC side is running an IOMMU with messages such as:
pci-endpoint-test 0000:0b:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x001c address=0xfff00000 flags=0x0000]
When running the pcitest.sh tests: the address used for a previous
test transfer generates the above error while the next test transfer is
running.
Fix this by testing the DMA transfer status in pci_epf_test_dma_callback()
and notifying the completion only when the transfer status is DMA_COMPLETE
or DMA_ERROR. Furthermore, in pci_epf_test_data_transfer(), be paranoid and
check again the transfer status and always call dmaengine_terminate_sync()
before returning.
Link: https://lore.kernel.org/r/20230415023542.77601-5-dlemoal@kernel.org
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Reinitialize the transfer_complete DMA transfer completion before calling
tx_submit(), to avoid seeing the DMA transfer complete before the
completion is initialized, thus potentially losing the completion
notification.
Link: https://lore.kernel.org/r/20230415023542.77601-4-dlemoal@kernel.org
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
pci_epf_type_add_cfs() is called only from pci_ep_cfs_add_type_group() in
drivers/pci/endpoint/pci-ep-cfs.c, so there is no need to export this
function. Move its code from pci-epf-core.c to pci-ep-cfs.c as a static
function.
Link: https://lore.kernel.org/r/20230415023542.77601-3-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
A PCI endpoint function driver can define function specific attributes
under its function configfs directory using the add_cfs() endpoint driver
operation. This is done by tying up the mkdir operation for the function
configfs directory to a call to the add_cfs() operation. However, there
are no checks preventing the user from repeatedly creating function
specific attribute directories with different names, resulting in the same
endpoint specific attributes group being added multiple times, which also
result in an invalid reference counting for the attribute groups. E.g.,
using the pci-epf-ntb function driver as an example, the user creates the
function as follows:
$ modprobe pci-epf-ntb
$ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb
$ mkdir func0
$ tree func0
func0/
|-- baseclass_code
|-- cache_line_size
|-- ...
`-- vendorid
$ mkdir func0/attrs
$ tree func0
func0/
|-- attrs
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- baseclass_code
|-- cache_line_size
|-- ...
`-- vendorid
At this point, the function can be started by linking the EP controller.
However, if the user mistakenly creates again a directory:
$ mkdir func0/attrs2
$ tree func0
func0/
|-- attrs
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- attrs2
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- baseclass_code
|-- cache_line_size
|-- ...
`-- vendorid
The endpoint function specific attributes are duplicated and cause a crash
when the endpoint function device is torn down:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 2 PID: 834 at lib/refcount.c:25 refcount_warn_saturate+0xc8/0x144
CPU: 2 PID: 834 Comm: rmdir Not tainted 6.3.0-rc1 #1
Hardware name: Pine64 RockPro64 v2.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
...
Call trace:
refcount_warn_saturate+0xc8/0x144
config_item_get+0x7c/0x80
configfs_rmdir+0x17c/0x30c
vfs_rmdir+0x8c/0x204
do_rmdir+0x158/0x184
__arm64_sys_unlinkat+0x64/0x80
invoke_syscall+0x48/0x114
...
Fix this by modifying pci_epf_cfs_work() to execute the new function
pci_ep_cfs_add_type_group() which itself calls pci_epf_type_add_cfs() to
obtain the function specific attribute group and the group name (directory
name) from the endpoint function driver. If the function driver defines an
attribute group, pci_ep_cfs_add_type_group() then proceeds to register this
group using configfs_register_group(), thus automatically exposing the
function type specific configfs attributes to the user. E.g.:
$ modprobe pci-epf-ntb
$ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb
$ mkdir func0
$ tree func0
func0/
|-- baseclass_code
|-- cache_line_size
|-- ...
|-- pci_epf_ntb.0
| |-- db_count
| |-- mw1
| |-- mw2
| |-- mw3
| |-- mw4
| |-- num_mws
| `-- spad_count
|-- primary
|-- ...
`-- vendorid
With this change, there is no need for the user to create or delete
directories in the endpoint function attributes directory. The
pci_epf_type_group_ops group operations are thus removed.
Also update the documentation for the pci-epf-ntb and pci-epf-vntb function
drivers to reflect this change, removing the explanations showing the need
to manually create the sub-directory for the function specific attributes.
Link: https://lore.kernel.org/r/20230415023542.77601-2-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
vNTB driver and NTB driver have same Kconfig prompt. Changed to make it
distinguishable.
Link: https://lore.kernel.org/r/20230202103832.2038286-1-mie@igel.co.jp
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
The module pointer in class_create() never actually did anything, and it
shouldn't have been requred to be set as a parameter even if it did
something. So just remove it and fix up all callers of the function in
the kernel tree at the same time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20230313181843.1207845-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Convert dra7xx to threaded IRQ handler (Manivannan Sadhasivam)
- Move tegra194 dw_pcie_ep_linkup() to threaded IRQ handler (Manivannan
Sadhasivam)
- Add a separate lock for the endpoint pci_epf list to avoid deadlock
while running callbacks (Manivannan Sadhasivam)
- Use callbacks instead of notifier chains to signal events from EPC to EPF
drivers (Manivannan Sadhasivam)
- Use link_up() callback in place of LINK_UP notifier (Manivannan
Sadhasivam)
* pci/endpoint:
PCI: endpoint: Use link_up() callback in place of LINK_UP notifier
PCI: endpoint: Use callback mechanism for passing events from EPC to EPF
PCI: endpoint: Use a separate lock for protecting epc->pci_epf list
PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handler
PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ
Since 8b41fc4454e3 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations are
used to identify modules. As a consequence, MODULE_LICENSE in non-modules
causes modprobe to misidentify the object file as a module when it is not,
and modprobe might succeed rather than failing with a suitable error
message.
For tristate modules that can be either built-in or loaded at runtime,
modprobe succeeds in both cases:
# modprobe ext4
[exit status zero if CONFIG_EXT4_FS=y or =m]
For boolean modules like the Standard Hot Plug Controller driver (shpchp)
that cannot be loaded at runtime, modprobe should always fail like this:
# modprobe shpchp
modprobe: FATAL: Module shpchp not found in directory /lib/modules/...
[exit status non-zero regardless of CONFIG_HOTPLUG_PCI_SHPC]
but prior to this commit, shpchp_core.c contained MODULE_LICENSE, so
"modprobe shpchp" silently succeeded when it should have failed.
Remove MODULE_LICENSE in files that cannot be built as modules.
[bhelgaas: commit log, squash]
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230216152410.4312-1-nick.alcock@oracle.com/
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
As a part of the transition towards callback mechanism for signalling the
events from EPC to EPF, let's use the link_up() callback in the place of
the LINK_UP notifier. This also removes the notifier support completely
from the PCI endpoint framework.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
Instead of using the notifiers for passing the events from EPC to EPF,
let's introduce a callback based mechanism where the EPF drivers can
populate relevant callbacks for EPC events they want to subscribe.
The use of notifiers in kernel is not recommended if there is a real link
between the sender and receiver, like in this case. Also, the existing
atomic notifier forces the notification functions to be in atomic context
while the caller may be in non-atomic context. For instance, the two
in-kernel users of the notifiers, pcie-qcom and pcie-tegra194, both are
calling the notifier functions in non-atomic context (from threaded IRQ
handlers). This creates a sleeping in atomic context issue with the
existing EPF_TEST driver that calls the EPC APIs that may sleep.
For all these reasons, let's get rid of the notifier chains and use the
simple callback mechanism for signalling the events from EPC to EPF
drivers. This preserves the context of the caller and avoids the latency
of going through a separate interface for triggering the notifications.
As a first step of the transition, the core_init() callback is introduced
in this commit, that'll replace the existing CORE_INIT notifier used for
signalling the init complete event from EPC.
During the occurrence of the event, EPC will go over the list of EPF
drivers attached to it and will call the core_init() callback if available.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@kernel.org>
The EPC controller maintains a list of EPF drivers added to it. For
protecting this list against the concurrent accesses, the epc->lock
(used for protecting epc_ops) has been used so far. Since there were
no users trying to use epc_ops and modify the pci_epf list simultaneously,
this was not an issue.
But with the addition of callback mechanism for passing the events, this
will be a problem. Because the pci_epf list needs to be iterated first
for getting hold of the EPF driver and then the relevant event specific
callback needs to be called for the driver.
If the same epc->lock is used, then it will result in a deadlock scenario.
For instance,
...
mutex_lock(&epc->lock);
list_for_each_entry(epf, &epc->pci_epf, list) {
epf->event_ops->core_init(epf);
|
|-> pci_epc_set_bar();
|
|-> mutex_lock(&epc->lock) # DEADLOCK
...
So to fix this issue, use a separate lock called "list_lock" for
protecting the pci_epf list against the concurrent accesses. This lock
will also be used by the callback mechanism.
Link: https://lore.kernel.org/linux-pci/20230124071158.5503-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in
epf_ntb_mw_bar_init()") added a "num_mws" parameter to
epf_ntb_mw_bar_clear() but failed to add kernel-doc for num_mws.
Add kernel-doc for num_mws on epf_ntb_mw_bar_clear().
Fixes: 8e4bfbe644a6 ("PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()")
Link: https://lore.kernel.org/r/20230103024907.293853-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use epf_db[i] dereference instead of readl() because epf_db is
in memory allocated by dma_alloc_coherent(), not I/O.
Remove useless/duplicated readl() in the process.
Link: https://lore.kernel.org/r/20221102141014.1025893-7-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
NTB spad entry item size is sizeof(u32), replace hardcoded 4 with it.
Link: https://lore.kernel.org/r/20221102141014.1025893-6-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
epf_db_phy member in struct epf_ntb is not used, remove it.
Link: https://lore.kernel.org/r/20221102141014.1025893-5-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Replace pci_epc_mem_free_addr() with pci_epf_free_space() in the
error handle path to match pci_epf_alloc_space().
Link: https://lore.kernel.org/r/20221102141014.1025893-4-Frank.Li@nxp.com
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cleanup warning found by scripts/kernel-doc.
Consolidate terms:
- host, host1 to HOST
- vhost, vHost, Vhost, VHOST2 to VHOST
Link: https://lore.kernel.org/r/20221102141014.1025893-2-Frank.Li@nxp.com
Signed-off-by: Frank Li <frank.li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Change to follow the Kconfig style guide. This patch fixes to use tab
rather than space to indent, while help text is indented an additional
two spaces.
Link: https://lore.kernel.org/r/20220815025006.48167-1-mie@igel.co.jp
Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.
Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes: 5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Since there is no release callback defined for the PCI EPC device,
the below warning is thrown by driver core when a PCI endpoint driver is
removed:
Device 'e65d0000.pcie-ep' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst.
WARNING: CPU: 0 PID: 139 at drivers/base/core.c:2232 device_release+0x78/0x8c
Hence, add the release callback and also move the kfree(epc) from
pci_epc_destroy() so that the epc memory is freed when all references are
dropped.
Link: https://lore.kernel.org/r/20220623003817.298173-1-yoshihiro.shimoda.uh@renesas.com
Tested-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
and NTB EndPoint Function (EPF) support and the various fixes from that
being in -next for Linux v5.20
-----BEGIN PGP SIGNATURE-----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=DAah
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
This sscanf() is reading from the filename which was set by the kernel
so it should be trust worthy. Although the data is likely trust worthy
there is some bounds checking but unfortunately, it is not complete or
consistent. Additionally, the Smatch static checker marks everything
that comes from sscanf() as tainted and so Smatch complains that this
code can lead to an out of bounds issue. Let's clean things up and make
Smatch happy.
The first problem is that there is no bounds checking in the _show()
functions. The _store() and _show() functions are very similar so make
the bounds checking the same in both.
The second issue is that if "win_no" is zero it leads to an array
underflow so add an if (win_no <= 0) check for that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Return an error code if pci_register_driver() fails. Don't return
success.
Fixes: da51fd247424 ("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
sparse reports
drivers/pci/endpoint/functions/pci-epf-vntb.c:975:5: warning: symbol 'pci_read' was not declared. Should it be static?
drivers/pci/endpoint/functions/pci-epf-vntb.c:984:5: warning: symbol 'pci_write' was not declared. Should it be static?
drivers/pci/endpoint/functions/pci-epf-vntb.c:989:16: warning: symbol 'vpci_ops' was not declared. Should it be static?
These functions and variables are only used in pci-epf-vntb.c, so their storage
class specifiers should be static.
Fixes: ff32fac00d97 ("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In error case of epf_ntb_mw_bar_init(), memory window BARs should be
cleared, so add 'num_mws' parameter in epf_ntb_mw_bar_clear() and
calling it in error path to clear the BARs. Also add missing error
code when pci_epc_mem_alloc_addr() fails.
Fixes: ff32fac00d97 ("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
If CONFIG_NTB is not set and CONFIG_PCI_EPF_VNTB is y.
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
drivers/pci/endpoint/functions/pci-epf-vntb.o: In function `epf_ntb_cmd_handler':
pci-epf-vntb.c:(.text+0x95e): undefined reference to `ntb_db_event'
pci-epf-vntb.c:(.text+0xa1f): undefined reference to `ntb_link_event'
pci-epf-vntb.c:(.text+0xa42): undefined reference to `ntb_link_event'
drivers/pci/endpoint/functions/pci-epf-vntb.o: In function `pci_vntb_probe':
pci-epf-vntb.c:(.text+0x1250): undefined reference to `ntb_register_device'
The functions ntb_*() are defined in drivers/ntb/core.c, which need CONFIG_NTB setting y to be build-in.
To fix this build error, add depends on NTB.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: ff32fac00d97("NTB: EPF: support NTB transfer between PCI RC and EP connection")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Acked-by: Frank Li <frank.li@nxp.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The pointer addr is being set to null using 0. Use NULL instead.
Cleans up sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
- Remove unused struct dw_edma_chip.irq (Frank Li)
- Move eDMA private data from struct dw_edma to struct dw_edma_chip (Frank
Li)
- Convert "struct dw_edma_region rg_region" to "void __iomem *reg_base"
since only the virtual address (not physical address or size) is used
(Frank Li)
- Rename "*_ch_cnt" to "ll_*_cnt" to reflect actual usage (Frank Li)
- Drop dma_slave_config.direction field usage (Serge Semin)
- Fix eDMA Rd/Wr-channels and DMA-direction semantics (Serge Semin)
- Add chip-specific DW_EDMA_CHIP_LOCAL flag to indicate that local eDMA
doesn't require generating MSIs to remote (Frank Li)
- Enable DMA tests for endpoints that support it (Frank Li)
* pci/ctrl/dwc-edma:
PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities
dmaengine: dw-edma: Add support for chip-specific flags
dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction semantics
dmaengine: dw-edma: Drop dma_slave_config.direction field usage
dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct dw_edma_chip
dmaengine: dw-edma: Change rg_region to reg_base in struct dw_edma_chip
dmaengine: dw-edma: Detach the private data and chip info structures
dmaengine: dw-edma: Remove unused irq field in struct dw_edma_chip
Some PCI Endpoint controllers integrate an eDMA (embedded DMA). eDMA can
bypass the outbound memory address translation unit to access all RC memory
space.
Add eDMA support for pci-epf-test.
Depending on HW availability, the EPF test can use either eDMA or general
system DMA controllers to perform DMA. The test tries to use eDMA first and
falls back to general system DMA controllers if there's no eDMA
Separate dma_chan to dma_chan_tx and dma_chan_rx. Search for an eDMA
channel first, then search for a memory-to-memory DMA channel. If general
memory to memory channels are used, dma_chan_rx = dma_chan_tx.
Add dma_addr_t dma_remote in pci_epf_test_data_transfer() because eDMA uses
remote RC physical address directly.
Add enum dma_transfer_direction dir in pci_epf_test_data_transfer() because
eDMA chooses the correct RX/TX channel by dir.
The overall steps are:
1. Execute dma_request_channel() and filter function to find correct eDMA
RX and TX Channel. If a channel does not exist, fallback to try to
allocate general memory to memory DMA channel.
2. Execute dmaengine_slave_config() to configure remote side physical
address.
3. Execute dmaengine_prep_slave_single() to create transfer descriptor.
4. Execute tx_submit().
5. Execute dma_async_issue_pending()
[bhelgaas: squash in fix from Dan Carpenter <dan.carpenter@oracle.com>:
https://lore.kernel.org/r/Ys2GSTnZhuLzzQG5@kili, also previously posted by
Peng Wu <wupeng58@huawei.com>:
https://lore.kernel.org/all/CANXvt5rK98-cEMgpzopY9POOK8a5=VDib8uKPLgJakOG=hRfwQ@mail.gmail.com/]
Link: https://lore.kernel.org/r/20220524152159.2370739-9-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Unbinding an endpoint function from the endpoint controller shouldn't stop
the controller. This is especially a problem for multi-function endpoints
where other endpoints may still be active.
Don't stop the controller when unbinding one of its endpoints. Normally
the controller is stopped via configfs.
Fixes: 349e7a85b25f ("PCI: endpoint: functions: Add an EP function to test PCI")
Link: https://lore.kernel.org/r/20220622040924.113279-1-mie@igel.co.jp
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
- Sort Intel Device IDs by value (Andy Shevchenko)
- Change Capability offsets to hex to match spec (Baruch Siach)
- Correct misspellings (Krzysztof Wilczyński)
- Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)
* pci/misc:
misc: pci_endpoint_test: Terminate statement with semicolon
PCI: Correct misspelled words
PCI: Change capability register offsets to hex
PCI: Sort Intel Device IDs by value
Fix a number of misspelled words, and while at it, correct two phrases used
to indicate a status of an operation where words used have been cleverly
truncated and thus always trigger a spellchecking error while performing a
static code analysis over the PCI tree.
[bhelgaas: reverse sense of quirk ternary]
Link: https://lore.kernel.org/r/20220107225942.121484-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
