In io_sq_thread(), if there are task works to handle, current codes
will skip schedule() and go on polling sq again, but forget to clear
IORING_SQ_NEED_WAKEUP flag, fix this issue. Also add two helpers to
set and clear IORING_SQ_NEED_WAKEUP flag,
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As every iopoll request have a task ref, it becomes expensive to put
them one by one, instead we can put several at once integrating that
into io_req_free_batch().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Locked and pinned memory accounting in io_{,un}account_mem() depends on
having ->sqo_mm, which is NULL after a recent change for non SQPOLL'ed
io_ring. That disables the accounting.
Return ->sqo_mm initialisation back, and do __io_sq_thread_acquire_mm()
based on IORING_SETUP_SQPOLL flag.
Fixes: 8eb06d7e8d ("io_uring: fix missing ->mm on exit")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_buffer_unregister() uses cxt->sqo_mm for memory accounting, but
io_ring_ctx_free() drops ->sqo_mm before leaving pinned_vm
over-accounted. Postpone mm cleanup for when it's not needed anymore.
Fixes: 309758254e ("io_uring: report pinned memory usage")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't implement fast path of kbuf freeing and management inlined into
io_recv{,msg}(), that's error prone and duplicates handling. Replace it
with a helper io_put_recv_kbuf(), which mimics io_put_rw_kbuf() in the
io_read/write().
This also keeps cflags calculation in one place, removing duplication
between rw and recv/send.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract a common helper for cleaning up a selected buffer, this will be
used shortly. By the way, correct cflags types to unsigned and, as kbufs
are anyway tracked by a flag, remove useless zeroing req->rw.addr.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move REQ_F_BUFFER_SELECT flag check out of io_recv_buffer_select(), and
do that in its call sites That saves us from double error checking and
possibly an extra function call.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_clean_op() may be skipped even if there is a selected io_buffer,
that's because *select_buffer() funcions never set REQ_F_NEED_CLEANUP.
Trigger io_clean_op() when REQ_F_BUFFER_SELECTED is set as well, and
and clear the flag if was freed out of it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning error from io_recv(), go through generic cleanup
path, because it'll retain cflags for userspace. Do the same for
io_send() for consistency.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the return on a bad socket, kmsg is always non-null by the end
of the function, prune left extra checks and initialisations.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Flip over "if (sock)" condition with return on error, the upper layer
will take care. That change will be handy later, but already removes
an extra jump from hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, file refs in struct io_submit_state are tracked with 2 vars:
@has_refs -- how many refs were initially taken
@used_refs -- number of refs used
Replace it with a single variable counting how many refs left at the
current moment.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
RLIMIT_SIZE in needed only for execution from an io-wq context, hence
move all preparations from hot path to io-wq work setup.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every call to io_req_defer_prep() is prepended with allocating ->io,
just do that in the function. And while we're at it, mark error paths
with unlikey and replace "if (ret < 0)" with "if (ret)".
There is only one change in the observable behaviour, that's instead of
killing the head request right away on error, it postpones it until the
link is assembled, that looks more preferable.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A switch in __io_clean_op() doesn't have default, it's pointless to list
opcodes that doesn't do any cleanup. Remove IORING_OP_OPEN* from there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only caller of io_req_work_grab_env() is io_prep_async_work(), and
they are both initialising req->work. Inline grab_env(), it's easier
to keep this way, moreover there already were bugs with misplacing
io_req_init_async().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->cflags is used only for defer-completion path, just use completion
data to store it. With the 4 bytes from the ->sequence patch and
compacting io_kiocb, this frees 8 bytes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->sequence is used only for deferred (i.e. DRAIN) requests, but
initialised for every request. Remove req->sequence from io_kiocb
together with its initialisation in io_init_req().
Replace it with a new field in struct io_defer_entry, that will be
calculated only when needed in io_req_defer(), which is a slow path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The only left user of req->list is DRAIN, hence instead of keeping a
separate per request list for it, do that with old fashion non-intrusive
lists allocated on demand. That's a really slow path, so that's OK.
This removes req->list and so sheds 16 bytes from io_kiocb.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using shared req->list, hang timeouts up on their own list
entry. struct io_timeout have enough extra space for it, but if that
will be a problem ->inflight_entry can reused for that.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As with the completion path, also use compl.list for overflowed
requests. If cleaned up properly, nobody needs per-op data there
anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->inflight_entry is used to track requests that grabbed files_struct.
Let's share it with iopoll list, because the only iopoll'ed ops are
reads and writes, which don't need a file table.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It supports both polling and I/O polling. Rename ctx->poll to clearly
show that it's only in I/O poll case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling io_req_complete(req) means that the request is done, and there
is nothing left but to clean it up. That also means that per-op data
after that should not be used, so we're free to reuse it in completion
path, e.g. to store overflow_list as done in this patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As for import_iovec(), return !=NULL iovec from io_import_iovec() only
when it should be freed. That includes returning NULL when iovec is
already in req->io, because it should be deallocated by other means,
e.g. inside op handler. After io_setup_async_rw() local iovec to ->io,
just mark it NULL, to follow the idea in io_{read,write} as well.
That's easier to follow, and especially useful if we want to reuse
per-op space for completion data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: only call kfree() on non-NULL pointer]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Preparing reads/writes for async is a bit tricky. Extract a helper to
not repeat it twice.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't deref req->io->rw every time, but put it in a local variable. This
looks prettier, generates less instructions, and doesn't break alias
analysis.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_kiocb::task_work was de-unionised, and is not planned to be shared
back, because it's too useful and commonly used. Hence, instead of
keeping a separate task_work in struct io_async_rw just reuse
req->task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
send/recv msghdr initialisation works with struct io_async_msghdr, but
pulls the whole struct io_async_ctx for no reason. That complicates it
with composite accessing, e.g. io->msg.
Use and pass the most specific type, which is struct io_async_msghdr.
It is the larget field in union io_async_ctx and doesn't save stack
space, but looks clearer.
The most of the changes are replacing "io->msg." with "iomsg->"
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every second field in send/recv is called msg, make it a bit more
understandable by renaming ->msg, which is a user provided ptr,
to ->umsg.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rings_size() sets sq_offset to the total size of the rings (the returned
value which is used for memory allocation). This is wrong: sq array should
be located within the rings, not after them. Set sq_offset to where it
should be.
Fixes: 75b28affdd ("io_uring: allocate the two rings together")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hristo Venev <hristo@venev.name>
Cc: io-uring@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in io_uring-5.8 fixes, as changes/cleanups to how we do locked
mem accounting require a fixup, and only one of the spots are noticed
by git as the other merges cleanly. The flags fix from io_uring-5.8
also causes a merge conflict, the leak fix for recvmsg, the double poll
fix, and the link failure locking fix.
* io_uring-5.8:
io_uring: fix lockup in io_fail_links()
io_uring: fix ->work corruption with poll_add
io_uring: missed req_init_async() for IOSQE_ASYNC
io_uring: always allow drain/link/hardlink/async sqe flags
io_uring: ensure double poll additions work with both request types
io_uring: fix recvmsg memory leak with buffer selection
io_uring: fix not initialised work->flags
io_uring: fix missing msg_name assignment
io_uring: account user memory freed when exit has been queued
io_uring: fix memleak in io_sqe_files_register()
io_uring: fix memleak in __io_sqe_files_update()
io_uring: export cq overflow status to userspace
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->work might be already initialised by the time it gets into
__io_arm_poll_handler(), which will corrupt it by using fields that are
in an union with req->work. Luckily, the only side effect is missing
put_creds(). Clean req->work before going there.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IOSQE_ASYNC branch of io_queue_sqe() is another place where an
unitialised req->work can be accessed (i.e. prior io_req_init_async()).
Nothing really bad though, it just looses IO_WQ_WORK_CONCURRENT flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently filter these for timeout_remove/async_cancel/files_update,
but we only should be filtering for fixed file and buffer select. This
also causes a second read of sqe->flags, which isn't needed.
Just check req->flags for the relevant bits. This then allows these
commands to be used in links, for example, like everything else.
Signed-off-by: Daniele Albano <d.albano@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The double poll additions were centered around doing POLL_ADD on file
descriptors that use more than one waitqueue (typically one for read,
one for write) when being polled. However, it can also end up being
triggered for when we use poll triggered retry. For that case, we cannot
safely use req->io, as that could be used by the request type itself.
Add a second io_poll_iocb pointer in the structure we allocate for poll
based retry, and ensure we use the right one from the two paths.
Fixes: 18bceab101 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_recvmsg() doesn't free memory allocated for struct io_buffer. This can
causes a leak when used with automatic buffer selection.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
59960b9deb ("io_uring: fix lazy work init") tried to fix missing
io_req_init_async(), but left out work.flags and hash. Do it earlier.
Fixes: 7cdaf587de ("io_uring: avoid whole io_wq_work copy for requests completed inline")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ensure to set msg.msg_name for the async portion of send/recvmsg,
as the header copy will copy to/from it.
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently account the memory after the exit work has been run, but
that leaves a gap where a process has closed its ring and until the
memory has been accounted as freed. If the memlocked ulimit is
borderline, then that can introduce spurious setup errors returning
-ENOMEM because the free work hasn't been run yet.
Account this as freed when we close the ring, as not to expose a tiny
gap where setting up a new ring can fail.
Fixes: 85faa7b834 ("io_uring: punt final io_ring_ctx wait-and-free to workqueue")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't use 'ctx' at all in io_sq_thread_drop_mm(), it just works
on the mm of the current task. Drop the argument.
Move io_file_put_work() to where we have the other forward declarations
of functions.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For those applications which are not willing to use io_uring_enter()
to reap and handle cqes, they may completely rely on liburing's
io_uring_peek_cqe(), but if cq ring has overflowed, currently because
io_uring_peek_cqe() is not aware of this overflow, it won't enter
kernel to flush cqes, below test program can reveal this bug:
static void test_cq_overflow(struct io_uring *ring)
{
struct io_uring_cqe *cqe;
struct io_uring_sqe *sqe;
int issued = 0;
int ret = 0;
do {
sqe = io_uring_get_sqe(ring);
if (!sqe) {
fprintf(stderr, "get sqe failed\n");
break;;
}
ret = io_uring_submit(ring);
if (ret <= 0) {
if (ret != -EBUSY)
fprintf(stderr, "sqe submit failed: %d\n", ret);
break;
}
issued++;
} while (ret > 0);
assert(ret == -EBUSY);
printf("issued requests: %d\n", issued);
while (issued) {
ret = io_uring_peek_cqe(ring, &cqe);
if (ret) {
if (ret != -EAGAIN) {
fprintf(stderr, "peek completion failed: %s\n",
strerror(ret));
break;
}
printf("left requets: %d\n", issued);
continue;
}
io_uring_cqe_seen(ring, cqe);
issued--;
printf("left requets: %d\n", issued);
}
}
int main(int argc, char *argv[])
{
int ret;
struct io_uring ring;
ret = io_uring_queue_init(16, &ring, 0);
if (ret) {
fprintf(stderr, "ring setup failed: %d\n", ret);
return 1;
}
test_cq_overflow(&ring);
return 0;
}
To fix this issue, export cq overflow status to userspace by adding new
IORING_SQ_CQ_OVERFLOW flag, then helper functions() in liburing, such as
io_uring_peek_cqe, can be aware of this cq overflow and do flush accordingly.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's safe to call kfree() with a NULL pointer, but it's also pointless.
Most of the time we don't have any data to free, and at millions of
requests per second, the redundant function call adds noticeable
overhead (about 1.3% of the runtime).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The "apoll" variable is freed and then used on the next line. We need
to move the free down a few lines.
Fixes: 0be0b0e33b ("io_uring: simplify io_async_task_func()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
First of all don't spin in io_ring_ctx_wait_and_kill() on iopoll.
Requests won't complete faster because of that, but only lengthen
io_uring_release().
The same goes for offloaded cleanup in io_ring_exit_work() -- it
already has waiting loop, don't do blocking active spinning.
For that, pass min=0 into io_iopoll_[try_]reap_events(), so it won't
actively spin. Leave the function if io_do_iopoll() there can't
complete a request to sleep in io_ring_exit_work().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nobody checks io_iopoll_check()'s output parameter @nr_events.
Remove the parameter and declare it further down the stack.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_iopoll_reap_events() doesn't care about returned valued of
io_iopoll_getevents() and does the same checks for list emptiness
and need_resched(). Just use io_do_iopoll().
io_sq_thread() doesn't check return value as well. It also passes min=0,
so there never be the second iteration inside io_poll_getevents().
Inline it there too.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's not nice to hold @uring_lock for too long io_iopoll_reap_events().
For instance, the lock is needed to publish requests to @poll_list, and
that locks out tasks doing that for no good reason. Loose it
occasionally.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nobody adjusts *nr_events (number of completed requests) before calling
io_iopoll_getevents(), so the passed @min shouldn't be adjusted as well.
Othewise it can return less than initially asked @min without hitting
need_resched().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->iopoll() may have completed current request, but instead of reaping
it, io_do_iopoll() just continues with the next request in the list.
As a result it can leave just polled and completed request in the list
up until next syscall. Even outer loop in io_iopoll_getevents() doesn't
help the situation.
E.g. poll_list: req0 -> req1
If req0->iopoll() completed both requests, and @min<=1,
then @req0 will be left behind.
Check whether a req was completed after ->iopoll().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't forget to fill cqe->flags properly in io_submit_flush_completions()
Fixes: a1d7c393c4 ("io_uring: enable READ/WRITE to use deferred completions")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A preparation path, extracts error path into a separate block. It looks
saner then calling req_set_fail_links() after io_put_req_find_next(), even
though it have been working well.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_prep_linked_timeout() sets REQ_F_LINK_TIMEOUT altering refcounting of
the following linked request. After that someone should call
io_queue_linked_timeout(), otherwise a submission reference of the linked
timeout won't be ever dropped.
That's what happens in io_steal_work() if io-wq decides to postpone linked
request with io_wqe_enqueue(). io_queue_linked_timeout() can also be
potentially called twice without synchronisation during re-submission,
e.g. io_rw_resubmit().
There are the rules, whoever did io_prep_linked_timeout() must also call
io_queue_linked_timeout(). To not do it twice, io_prep_linked_timeout()
will return non NULL only for the first call. That's controlled by
REQ_F_LINK_TIMEOUT flag.
Also kill REQ_F_QUEUE_TIMEOUT.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since we now have that in the 5.9 branch, convert the existing users of
task_work_add() to use this new helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a helper to run task_work instead of checking and running
manually in a bunch of different spots. While doing so, also move the
task run state setting where we run the task work. Then we can move it
out of the callback helpers. This also helps ensure we only do this once
per task_work list run, not per task_work item.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in task_work changes from the 5.8 series, as we'll need to apply
the same kind of changes to other parts in the 5.9 branch.
* io_uring-5.8:
io_uring: fix regression with always ignoring signals in io_cqring_wait()
io_uring: use signal based task_work running
task_work: teach task_work_add() to do signal_wake_up()
When switching to TWA_SIGNAL for task_work notifications, we also made
any signal based condition in io_cqring_wait() return -ERESTARTSYS.
This breaks applications that rely on using signals to abort someone
waiting for events.
Check if we have a signal pending because of queued task_work, and
repeat the signal check once we've run the task_work. This provides a
reliable way of telling the two apart.
Additionally, only use TWA_SIGNAL if we are using an eventfd. If not,
we don't have the dependency situation described in the original commit,
and we can get by with just using TWA_RESUME like we previously did.
Fixes: ce593a6c48 ("io_uring: use signal based task_work running")
Cc: stable@vger.kernel.org # v5.7
Reported-by: Andres Freund <andres@anarazel.de>
Tested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since 5.7, we've been using task_work to trigger async running of
requests in the context of the original task. This generally works
great, but there's a case where if the task is currently blocked
in the kernel waiting on a condition to become true, it won't process
task_work. Even though the task is woken, it just checks whatever
condition it's waiting on, and goes back to sleep if it's still false.
This is a problem if that very condition only becomes true when that
task_work is run. An example of that is the task registering an eventfd
with io_uring, and it's now blocked waiting on an eventfd read. That
read could depend on a completion event, and that completion event
won't get trigged until task_work has been run.
Use the TWA_SIGNAL notification for task_work, so that we ensure that
the task always runs the work when queued.
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a fancy bug, where exiting user task may not have ->mm,
that makes task_works to try to do kthread_use_mm(ctx->sqo_mm).
Don't do that if sqo_mm is NULL.
[ 290.460558] WARNING: CPU: 6 PID: 150933 at kernel/kthread.c:1238
kthread_use_mm+0xf3/0x110
[ 290.460579] CPU: 6 PID: 150933 Comm: read-write2 Tainted: G
I E 5.8.0-rc2-00066-g9b21720607cf #531
[ 290.460580] RIP: 0010:kthread_use_mm+0xf3/0x110
...
[ 290.460584] Call Trace:
[ 290.460584] __io_sq_thread_acquire_mm.isra.0.part.0+0x25/0x30
[ 290.460584] __io_req_task_submit+0x64/0x80
[ 290.460584] io_req_task_submit+0x15/0x20
[ 290.460585] task_work_run+0x67/0xa0
[ 290.460585] do_exit+0x35d/0xb70
[ 290.460585] do_group_exit+0x43/0xa0
[ 290.460585] get_signal+0x140/0x900
[ 290.460586] do_signal+0x37/0x780
[ 290.460586] __prepare_exit_to_usermode+0x126/0x1c0
[ 290.460586] __syscall_return_slowpath+0x3b/0x1c0
[ 290.460587] do_syscall_64+0x5f/0xa0
[ 290.460587] entry_SYSCALL_64_after_hwframe+0x44/0xa9
following with faults.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gcc 9.2.0 compiles io_req_find_next() as a separate function leaving
the first REQ_F_LINK_HEAD fast check not inlined. Help it by splitting
out the check from the function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Greatly simplify io_async_task_func() removing duplicated functionality
of __io_req_task_submit(). This do one extra spin lock/unlock for
cancelled poll case, but that shouldn't happen often.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_poll_task_func() hand-coded link submission forgetting to set
TASK_RUNNING, acquire mm, etc. Call existing helper for that,
i.e. __io_req_task_submit().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Actually, io_iopoll_queue() may have NULL ->mm, that's if SQ thread
didn't grabbed mm before doing iopoll. Don't fail reqs there, as after
recent changes it won't be punted directly but rather through task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid jumping through hoops to silence unused variable warnings, and
also fix sparse rightfully complaining about the locking context:
fs/io_uring.c:1593:39: warning: context imbalance in 'io_kill_linked_timeout' - unexpected unlock
Provide the functional helper as __io_kill_linked_timeout(), and have
separate the locking from it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently io_steal_work() is disabled, and every linked request should
go through task_work for initialisation. Do io_req_work_grab_env()
just before io-wq punting and for the whole link, so any request
reachable by io_steal_work() is prepared.
This is also interesting for another reason -- it localises
io_req_work_grab_env() into one place just before io-wq punting, helping
to to better manage req->work lifetime and add some neat
cleanup/optimisations later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_req_work_grab_env() call from io_req_defer_prep(), just call
it when neccessary.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Place io_req_init_async() in io_req_work_grab_env() so it won't be
forgotten.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove struct io_op_def *def parameter from io_req_work_grab_env(),
it's trivially deducible from req->opcode and fast. The API is
cleaner this way, and also helps the complier to understand
that it's a real constant and could be register-cached.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After __io_free_req() puts a ctx ref, it should be assumed that the ctx
may already be gone. However, it can be accessed when putting the
fallback req. Free the req first and then put the ctx.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are too many useless flags, kill REQ_F_TIMEOUT_NOSEQ, which can be
easily infered from req.timeout itself.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Generally, it's better to return a value directly than having out
parameter. It's cleaner and saves from some kinds of ugly bugs.
May also be faster.
Return next request from io_req_find_next() and friends directly
instead of passing out parameter.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linked timeout cancellation code is repeated in in io_req_link_next()
and io_fail_links(), and they differ in details even though shouldn't.
Basing on the fact that there is maximum one armed linked timeout in
a link, and it immediately follows the head, extract a function that
will check for it and defuse.
Justification:
- DRY and cleaner
- better inlining for io_req_link_next() (just 1 call site now)
- isolates linked_timeouts from common path
- reduces time under spinlock for failed links
- actually less code
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: fold in locking fix for io_fail_links()]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't forget to wake up a process to which io_rw_reissue() added
task_work.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->iopoll() is not necessarily called by a task that submitted a
request. Because of that, it's dangerous to grab_env() and punt async on
-EGAIN, potentially grabbing another task's mm and corrupting its
memory.
Do resubmit from the submitter task context.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a lot of new users of task_work, and some of task_work_add()
may happen while we do io polling, thus make iopoll from time to time
to do task_work_run(), so it doesn't poll for sitting there reqs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Assign req->result to io_size early in io_{read,write}(), it's enough
and makes it more straightforward.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After pulling nxt from a request, it's no more a links head, so clear
REQ_F_LINK_HEAD. Absence of this flag also indicates that there are no
linked requests, so replacing REQ_F_LINK_NEXT, which can be killed.
Linked timeouts also behave leaving the flag intact when necessary.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move all batch free bits close to each other and rename in a consistent
way.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no reason to not batch deallocation of linked requests. Take
away its next req first and handle it as everything else in
io_req_multi_free().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every request in io_req_multi_free() is has ->file set. Instead of
pointlessly defering and counting reqs with file, dismantle it on place
and save for batch dealloc.
It also saves us from potentially skipping io_cleanup_req(), put_task(),
etc. Never happens though, becacuse ->file is always there.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_free_req_many() is used only for iopoll requests, i.e. reads/writes.
Hence no need to batch inflight unhooking. For safety, it'll be done by
io_dismantle_req(), which replaces __io_req_aux_free(), and looks more
solid and cleaner.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We won't have valid ring_fd, ring_file in task work. Grab files early.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No reason to mark a head of a link as for-async in io_req_defer_prep().
grab_env(), etc. That will be done further during submission if
neccessary.
Mark for_async=false saving extra grab_env() in many cases.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's not enough to check for REQ_F_WORK_INITIALIZED and punt async
assuming that io_req_work_grab_env() was called, it may not have been.
E.g. io_close_prep() and personality path set the flag without further
async init.
As a quick fix, always pass next work through io_req_task_queue().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix build errors when CONFIG_NET is not set/enabled:
../fs/io_uring.c:5472:10: error: too many arguments to function ‘io_sendmsg’
../fs/io_uring.c:5474:10: error: too many arguments to function ‘io_send’
../fs/io_uring.c:5484:10: error: too many arguments to function ‘io_recvmsg’
../fs/io_uring.c:5486:10: error: too many arguments to function ‘io_recv’
../fs/io_uring.c:5510:9: error: too many arguments to function ‘io_accept’
../fs/io_uring.c:5518:9: error: too many arguments to function ‘io_connect’
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: io-uring@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge in changes that went into 5.8-rc3. GIT will silently do the
merge, but we still need a tweak on top of that since
io_complete_rw_common() was modified to take a io_comp_state pointer.
The auto-merge fails on that, and we end up with something that
doesn't compile.
* io_uring-5.8:
io_uring: fix current->mm NULL dereference on exit
io_uring: fix hanging iopoll in case of -EAGAIN
io_uring: fix io_sq_thread no schedule when busy
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's easier to return next work from ->do_work() than
having an in-out argument. Looks nicer and easier to compile.
Also, merge io_wq_assign_next() into its only user.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently links are always done in an async fashion, unless we catch them
inline after we successfully complete a request without having to resort
to blocking. This isn't necessarily the most efficient approach, it'd be
more ideal if we could just use the task_work handling for this.
Outside of saving an async jump, we can also do less prep work for these
kinds of requests.
Running dependent links from the task_work handler yields some nice
performance benefits. As an example, examples/link-cp from the liburing
repository uses read+write links to implement a copy operation. Without
this patch, the a cache fold 4G file read from a VM runs in about 3
seconds:
$ time examples/link-cp /data/file /dev/null
real 0m2.986s
user 0m0.051s
sys 0m2.843s
and a subsequent cache hot run looks like this:
$ time examples/link-cp /data/file /dev/null
real 0m0.898s
user 0m0.069s
sys 0m0.797s
With this patch in place, the cold case takes about 2.4 seconds:
$ time examples/link-cp /data/file /dev/null
real 0m2.400s
user 0m0.020s
sys 0m2.366s
and the cache hot case looks like this:
$ time examples/link-cp /data/file /dev/null
real 0m0.676s
user 0m0.010s
sys 0m0.665s
As expected, the (mostly) cache hot case yields the biggest improvement,
running about 25% faster with this change, while the cache cold case
yields about a 20% increase in performance. Outside of the performance
increase, we're using less CPU as well, as we're not using the async
offload threads at all for this anymore.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A bit more surgery required here, as completions are generally done
through the kiocb->ki_complete() callback, even if they complete inline.
This enables the regular read/write path to use the io_comp_state
logic to batch inline completions.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide the completion state to the handlers that we know can complete
inline, so they can utilize this for batching completions.
Cap the max batch count at 32. This should be enough to provide a good
amortization of the cost of the lock+commit dance for completions, while
still being low enough not to cause any real latency issues for SQPOLL
applications.
Xuan Zhuo <xuanzhuo@linux.alibaba.com> reports that this changes his
profile from:
17.97% [kernel] [k] copy_user_generic_unrolled
13.92% [kernel] [k] io_commit_cqring
11.04% [kernel] [k] __io_cqring_fill_event
10.33% [kernel] [k] udp_recvmsg
5.94% [kernel] [k] skb_release_data
4.31% [kernel] [k] udp_rmem_release
2.68% [kernel] [k] __check_object_size
2.24% [kernel] [k] __slab_free
2.22% [kernel] [k] _raw_spin_lock_bh
2.21% [kernel] [k] kmem_cache_free
2.13% [kernel] [k] free_pcppages_bulk
1.83% [kernel] [k] io_submit_sqes
1.38% [kernel] [k] page_frag_free
1.31% [kernel] [k] inet_recvmsg
to
19.99% [kernel] [k] copy_user_generic_unrolled
11.63% [kernel] [k] skb_release_data
9.36% [kernel] [k] udp_rmem_release
8.64% [kernel] [k] udp_recvmsg
6.21% [kernel] [k] __slab_free
4.39% [kernel] [k] __check_object_size
3.64% [kernel] [k] free_pcppages_bulk
2.41% [kernel] [k] kmem_cache_free
2.00% [kernel] [k] io_submit_sqes
1.95% [kernel] [k] page_frag_free
1.54% [kernel] [k] io_put_req
[...]
0.07% [kernel] [k] io_commit_cqring
0.44% [kernel] [k] __io_cqring_fill_event
Signed-off-by: Jens Axboe <axboe@kernel.dk>
