mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-07 13:43:51 +00:00
bdb543b166
32160 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Manorit Chawdhry
|
bdb543b166 |
arm64: dts: ti: k3-j7200-evm*: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to: - pmic regulator for enabling AVS Support - main_uart0, mcu_uart0(DM), wkup_uart0(TIFS) for Traces - mmc0, mmc1, usb0, ospi0, hbmc for enabling various bootmodes. Reviewed-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-12-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
e45355835c |
arm64: dts: ti: k3-j721e-sk*: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to: - main_uart0, mcu_uart0(DM), wkup_uart0(TIFS) for Traces - mmc1, usb0, usb1, ospi0 for enabling various bootmodes. Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-11-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
fbdb8aa4ea |
arm64: dts: ti: k3-j721e-evm*: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to: - main_uart0, mcu_uart0(DM), wkup_uart0(TIFS) for Traces - mmc0, mmc1, usb0, ospi0, ospi1, hbmc for enabling various bootmodes. Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-10-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
781cb8f1ad |
arm64: dts: ti: k3-am68-sk*: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to: - main_uart8, mcu_uart0(DM), wkup_uart0(TIFS) for Traces - mmc1, ospi0 for enabling various bootmodes. - eeprom for board detection Reviewed-by: Udit Kumar <u-kumar1@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-9-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
15a432a4a0 |
arm64: dts: ti: k3-j721s2-evm*: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to: - pmic regulator for enabling AVS Support - main_uart8, mcu_uart0(DM), wkup_uart0(TIFS) for Traces - mmc0, mmc1, usb0, ospi0, ospi1 for enabling various bootmodes. Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-8-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
49b0b706af |
arm64: dts: ti: k3-j784s4-j742s2-evm-common: Remove parent nodes bootph-*
Adding bootph properties on leaf nodes imply that they are applicable to the parent nodes as well. Bootloaders can derive the parent nodes when bootph is available in the leaf nodes. Remove the bootph-* properties from parent nodes as they are redundant. Reviewed-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-7-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
b903ab269e |
arm64: dts: ti: k3-j7200: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to - System controller nodes that allow controlling power domain, clocks, etc. - secure_proxy_sa3/secure_proxy_main mboxes for communication with System Controller - mcu_ringacc/mcu_udmap for DMA to SMS - chipid for detection soc information. - mcu_timer0 for bootloader tick-timer. - hbmc_mux for enabling Hyperflash support - ESM nodes for enabling ESM support. - wkup_vtm for enabling Adaptive voltage scaling(AVS) support Reviewed-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-6-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
dd2c7aeca3 |
arm64: dts: ti: k3-j721e: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to - System controller nodes that allow controlling power domain, clocks, etc. - secure_proxy_sa3/secure_proxy_main mboxes for communication with System Controller - mcu_ringacc/mcu_udmap for DMA to SMS - chipid for detection soc information. - mcu_timer0 for bootloader tick-timer. - hbmc_mux for enabling Hyperflash support - ESM nodes for enabling ESM support. - wkup_vtm for enabling Adaptive voltage scaling(AVS) support Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-5-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
83ab86a441 |
arm64: dts: ti: k3-j721s2: Add bootph-* properties
Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to - System controller nodes that allow controlling power domain, clocks, etc. - secure_proxy_sa3/secure_proxy_main mboxes for communication with System Controller - mcu_ringacc/mcu_udmap for DMA to SMS - chipid for detection soc information. - mcu_timer0 for bootloader tick-timer. - wkup_vtm for enabling Adaptive voltage scaling(AVS) support Reviewed-by: Andrew Davis <afd@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-4-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
f54d577df4 |
arm64: dts: ti: k3-j784s4: Add bootph-* properties
The following nodes are being used in the bootloaders. Adds bootph-* properties to the leaf nodes to enable bootloaders to utilise them. Following adds bootph-* to - secure_proxy_sa3/secure_proxy_main mboxes for communication with System Controller - wkup_vtm for enabling Adaptive voltage scaling(AVS) support Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-3-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
c4fbee5eb6 |
arm64: dts: ti: k3-j784s4-j742s2-mcu-wakeup: Remove parent nodes bootph-*
Adding bootph properties on leaf nodes imply that they are applicable to the parent nodes as well. Bootloaders can derive the parent nodes when bootph is available in the leaf nodes. Remove the bootph-* properties from parent nodes as they are redundant. Reviewed-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-2-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
1d381865ad |
arm64: dts: ti: k3-j784s4-j742s2-mcu-wakeup: Move bootph from mcu_timer1 to mcu_timer0
Bootloader are using mcu_timer0 instead of mcu_timer1. Adds bootph to mcu_timer0 instead of mcu_timer1. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20241024-b4-upstream-bootph-all-v6-1-2af90e3a4fe7@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
MD Danish Anwar
|
30a9a1a26b |
arm64: dts: ti: k3-am64: Add ti,pa-stats property
Add ti,pa-stats phandles to k3-am64x-evm.dts. This is a phandle to PA_STATS syscon regmap and will be used to dump IET related statistics for ICSSG Driver Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241014074527.1121613-5-danishanwar@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
MD Danish Anwar
|
007f3e72c9 |
arm64: dts: ti: k3-am64-main: Add ti,pruss-pa-st node
Add pa-stats nodes to k3-am64-main.dtsi for all ICSSG instances. This is needed to dump IET related statistics for ICSSG Driver. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241014074527.1121613-4-danishanwar@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
MD Danish Anwar
|
6fb909467d |
arm64: dts: ti: k3-am654-icssg2: Add ti,pa-stats property
Add ti,pa-stats phandles to AM65x device trees. This is a phandle to PA_STATS syscon regmap and will be used to dump IET related statistics for ICSSG Driver Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/20241014074527.1121613-3-danishanwar@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
MD Danish Anwar
|
aef4959ee0 |
arm64: dts: ti: k3-am65-main: Add ti,pruss-pa-st node
Add pa-stats nodes to k3-am65-main.dtsi for all ICSSG instances. This is needed to dump IET related statistics for ICSSG Driver. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241014074527.1121613-2-danishanwar@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Nathan Morrisson
|
e6c01aeb22 |
arm64: dts: ti: k3-am62a7-phyboard-lyra-rdk: Update ethernet internal delay
Update the RGMII delay to 2.5ns to improve performance. We use an additional mapper board for the am62a7 phyBOARD Lyra which makes this delay necessary. Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20241004221049.1155022-1-nmorrisson@phytec.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Nathan Morrisson
|
c33a0a02a2 |
arm64: dts: ti: k3-am62x-phyboard-lyra: Drop unnecessary McASP AFIFOs
Drop the McASP AFIFOs for better audio latency. This adds back a
change that was lost while refactoring the device tree.
Fixes:
|
||
|
Judith Mendez
|
25da98eb39 |
arm64: dts: ti: k3-am64x-sk: Enable eQEP
There are 3 instances of eQEP on AM64x. Only EQEP0 signals can be routed to the user expansion so enable only EQEP0 in k3-am642-sk.dts. Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240924220700.886313-6-jm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Judith Mendez
|
78b918b58e |
arm64: dts: ti: k3-am64-main: Add eQEP nodes
Add eQEP device tree nodes 0-2 for AM642 SoC. Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240924220700.886313-5-jm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Judith Mendez
|
0f4a318ee6 |
arm64: dts: ti: k3-am62p-main: Add eQEP nodes
Add eQEP device tree nodes 0-2 for AM62P5 SoC. Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240924220700.886313-4-jm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Judith Mendez
|
36370ccf93 |
arm64: dts: ti: k3-am62a-main: Add eQEP nodes
Add eQEP device tree nodes 0-2 for AM62A7 SoC. Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240924220700.886313-3-jm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Judith Mendez
|
79e668d0d9 |
arm64: dts: ti: k3-am62-main: Add eQEP nodes
Add eQEP device tree nodes 0-2 for AM625 SoC. Signed-off-by: Judith Mendez <jm@ti.com> Link: https://lore.kernel.org/r/20240924220700.886313-2-jm@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Hari Nagalla
|
8e77fc1fbb |
arm64: dts: ti: k3-am642-evm: Add M4F remoteproc node
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU domain. This core can be used by non safety applications as a remote processor. When used as a remote processor with virtio/rpmessage IPC, two carveout reserved memory nodes are needed. The first region is used as a DMA pool for the rproc device, and the second region will furnish the static carveout regions for the firmware memory. The current carveout addresses and sizes are defined statically for each rproc device. The M4F processor does not have an MMU, and as such requires the exact memory used by the firmware to be set-aside. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20241003170118.24932-6-afd@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Hari Nagalla
|
6e36e62003 |
arm64: dts: ti: k3-am642-sk: Add M4F remoteproc node
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU domain. This core can be used by non safety applications as a remote processor. When used as a remote processor with virtio/rpmessage IPC, two carveout reserved memory nodes are needed. The first region is used as a DMA pool for the rproc device, and the second region will furnish the static carveout regions for the firmware memory. The current carveout addresses and sizes are defined statically for each rproc device. The M4F processor does not have an MMU, and as such requires the exact memory used by the firmware to be set-aside. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20241003170118.24932-5-afd@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Hari Nagalla
|
ef1876ff76 |
arm64: dts: ti: k3-am64: Add M4F remoteproc node
The AM64x SoCs of the TI K3 family have a Cortex M4F core in the MCU domain. This core can be used by non safety applications as a remote processor. When used as a remote processor with virtio/rpmessage IPC, two carveout reserved memory nodes are needed. Disable by default as this node is not complete until mailbox data is provided in the board level DT. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20241003170118.24932-4-afd@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Hari Nagalla
|
23a6aba92e |
arm64: dts: ti: k3-am625-sk: Add M4F remoteproc node
The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU domain. This core can be used by non safety applications as a remote processor. When used as a remote processor with virtio/rpmessage IPC, two carveout reserved memory nodes are needed. The first region is used as a DMA pool for the rproc device, and the second region will furnish the static carveout regions for the firmware memory. The current carveout addresses and sizes are defined statically for each rproc device. The M4F processor does not have an MMU, and as such requires the exact memory used by the firmware to be set-aside. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20241003170118.24932-3-afd@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Hari Nagalla
|
be4bac3bcb |
arm64: dts: ti: k3-am62: Add M4F remoteproc node
The AM62x SoCs of the TI K3 family have a Cortex M4F core in the MCU domain. This core can be used by non safety applications as a remote processor. When used as a remote processor with virtio/rpmessage IPC, two carveout reserved memory nodes are needed. Disable by default as this node is not complete until mailbox data is provided in the board level DT. Signed-off-by: Hari Nagalla <hnagalla@ti.com> Signed-off-by: Andrew Davis <afd@ti.com> Tested-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20241003170118.24932-2-afd@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Garrett Giordano
|
151ed40a4f |
Revert "arm64: dts: ti: am62-phyboard-lyra: Add overlay to increase cpu frequency to 1.4 GHz"
We now configure the a53_opp_table to include a 1.4 GHz node and set our
VDD_CORE to 0.85v in the k3-am62-phycore-som.dtsi. This change is to
match our PMIC which is now set to output 0.85v by default.
This reverts commit
|
||
|
Garrett Giordano
|
bc3552d675 |
arm64: dts: ti: am62-phycore-som: Increase cpu frequency to 1.4 GHz
The am625 is capable of running at 1.4 GHz when VDD_CORE is increased from 0.75V to 0.85V. Here we add a 1.4 GHz node to the a53_opp_table and increase the VDD_CORE voltage accordingly. Signed-off-by: Garrett Giordano <ggiordano@phytec.com> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20241001071916.1362213-2-ggiordano@phytec.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
13dc96a527 |
arm64: dts: ti: Add support for J742S2 EVM board
J742S2 EVM board is designed for TI J742S2 SoC. It supports the following interfaces: * 16 GB DDR4 RAM * x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode * x1 Input Audio Jack, x1 Output Audio Jack * x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port * x1 4L PCIe connector * x1 UHS-1 capable micro-SD card slot * 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash, UFS flash. * x6 UART through UART-USB bridge * XDS110 for onboard JTAG debug using USB * Temperature sensors, user push buttons and LEDs * x1 GESI expander, x2 Display connector * x1 15-pin CSI header * x6 MCAN instances Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide) Link: https://www.ti.com/lit/zip/SPAC001 (Schematics) Reviewed-by: Beleswar Padhi <b-padhi@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-5-6a7aa2736797@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
38fd90a3e1 |
arm64: dts: ti: Introduce J742S2 SoC family
This device is a subset of J784S4 and shares the same memory map and thus the nodes are being reused from J784S4 to avoid duplication. Here are some of the salient features of the J742S2 automotive grade application processor: The J742S2 SoC belongs to the K3 Multicore SoC architecture platform, providing advanced system integration in automotive, ADAS and industrial applications requiring AI at the network edge. This SoC extends the K3 Jacinto 7 family of SoCs with focus on raising performance and integration while providing interfaces, memory architecture and compute performance for multi-sensor, high concurrency applications. Some changes that this devices has from J784S4 are: * 4x Cortex-A72 vs 8x Cortex-A72 * 3x C7x DSP vs 4x C7x DSP * 4 port ethernet switch vs 8 port ethernet switch ( Refer Table 2-1 for Device comparison with J7AHP ) Link: https://www.ti.com/lit/pdf/spruje3 (TRM) Reviewed-by: Beleswar Padhi <b-padhi@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-4-6a7aa2736797@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
39b623c05c |
arm64: dts: ti: Refactor J784s4-evm to a common file
Refactor J784s4-evm to a common file which uses the superset device to allow reuse in j742s2-evm which uses the subset part. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Reviewed-by: Beleswar Padhi <b-padhi@ti.com> Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-2-6a7aa2736797@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Manorit Chawdhry
|
9cc161a450 |
arm64: dts: ti: Refactor J784s4 SoC files to a common file
Refactor J784s4 SoC files to a common file which uses the superset device to allow reuse in j742s2-evm which uses the subset part. Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Reviewed-by: Beleswar Padhi <b-padhi@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20240902-b4-upstream-j742s2-v6-1-6a7aa2736797@ti.com Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> |
||
|
Linus Torvalds
|
3efc57369a |
x86:
* KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or deleted.
The former does not have particularly noticeable overhead, but Intel's
TDX will require the guest to re-accept private pages if they are
dropped from the secure EPT, which is a non starter. Actually,
the only reason why this is not already being done is a bug which
was never fully investigated and caused VM instability with assigned
GeForce GPUs, so allow userspace to opt into the new behavior.
* Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
* Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
* Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value at the ICR offset.
* Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
* Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
* Fix a WARN caused by RSM entering a nested guest from SMM with invalid guest
state, by forcing the vCPU out of guest mode prior to signalling SHUTDOWN
(the SHUTDOWN hits the VM altogether, not the nested guest)
* Overhaul the "unprotect and retry" logic to more precisely identify cases
where retrying is actually helpful, and to harden all retry paths against
putting the guest into an infinite retry loop.
* Add support for yielding, e.g. to honor NEED_RESCHED, when zapping rmaps in
the shadow MMU.
* Refactor pieces of the shadow MMU related to aging SPTEs in prepartion for
adding multi generation LRU support in KVM.
* Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is enabled,
i.e. when the CPU has already flushed the RSB.
* Trace the per-CPU host save area as a VMCB pointer to improve readability
and cleanup the retrieval of the SEV-ES host save area.
* Remove unnecessary accounting of temporary nested VMCB related allocations.
* Set FINAL/PAGE in the page fault error code for EPT violations if and only
if the GVA is valid. If the GVA is NOT valid, there is no guest-side page
table walk and so stuffing paging related metadata is nonsensical.
* Fix a bug where KVM would incorrectly synthesize a nested VM-Exit instead of
emulating posted interrupt delivery to L2.
* Add a lockdep assertion to detect unsafe accesses of vmcs12 structures.
* Harden eVMCS loading against an impossible NULL pointer deref (really truly
should be impossible).
* Minor SGX fix and a cleanup.
* Misc cleanups
Generic:
* Register KVM's cpuhp and syscore callbacks when enabling virtualization in
hardware, as the sole purpose of said callbacks is to disable and re-enable
virtualization as needed.
* Enable virtualization when KVM is loaded, not right before the first VM
is created. Together with the previous change, this simplifies a
lot the logic of the callbacks, because their very existence implies
virtualization is enabled.
* Fix a bug that results in KVM prematurely exiting to userspace for coalesced
MMIO/PIO in many cases, clean up the related code, and add a testcase.
* Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_
the gpa+len crosses a page boundary, which thankfully is guaranteed to not
happen in the current code base. Add WARNs in more helpers that read/write
guest memory to detect similar bugs.
Selftests:
* Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
* Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
* Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
* Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
* Misc cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb201AUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOM1gf+Ij7dpCh0KwoNYlHfW2aCHAv3PqQd
cKMDSGxoCernbJEyPO/3qXNUK+p4zKedk3d92snW3mKa+cwxMdfthJ3i9d7uoNiw
7hAgcfKNHDZGqAQXhx8QcVF3wgp+diXSyirR+h1IKrGtCCmjMdNC8ftSYe6voEkw
VTVbLL+tER5H0Xo5UKaXbnXKDbQvWLXkdIqM8dtLGFGLQ2PnF/DdMP0p6HYrKf1w
B7LBu0rvqYDL8/pS82mtR3brHJXxAr9m72fOezRLEUbfUdzkTUi/b1vEe6nDCl0Q
i/PuFlARDLWuetlR0VVWKNbop/C/l4EmwCcKzFHa+gfNH3L9361Oz+NzBw==
=Q7kz
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
||
|
Linus Torvalds
|
348325d644 |
asm-generic updates for 6.12
These are only two small patches, one cleanup for arch/alpha and a preparation patch cleaning up the handling of runtime constants in the linker scripts. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmboHV0ACgkQYKtH/8kJ UifHfhAAqTHHxxe+HiphGBPHN0ODyLVUs7fOQHtLOSmJlQa6x1TCR/+1nL1kTDbe j6EcIRxZrllQZ+jZBA8z2XsAmjjBLUxCB4yu6oxYJh8OdFyqeVM/myZEr2TAyb0o A3D9b+rfnY8sr9XaFHSHGWbh4c33cGQhACumHVAjtPvU06Voskq4pAf9ZnpGkNBe AdKNTVG6+w84dKUNuzXcexP8d7SnsXNfd6T9+evtW/M+fziWzs3aPQr+GZED96E5 8IRldXi2nzIwm9LT5IzZAt+QvpVb2Qob1+rej9p5WpptGp840CROTo61SwaYHCMV DDxTlmADsApWJQ3B5gDu6QS2jXT4eeOrY3JI2baeCyOV6auj15UXKiWc2QVoHOVU 6+PzlSFuLatI6WsxXfOcD0o3bfQXMKS6zCC/4eD7Y/SmmMqBbL5+d9sU5lwkiOFl swoswF4HTwo5d6NdkSuJOt6KA/V8a68lBhKYBXHu2yuLi/LDNOaipEvBHQLzfnlY 91e5DtDiHK9CYDNkwiR+bV9rQnhA535JSlfR8VtpU/SJTTjyF+dkt9JGPdivXoIA 8Zv+DN/oyrahUtCrgzzPXahOuBrfD/WfIajsvpEK6vNPuBhscsZFg/thc70FMIXo qn8Dmpi/CnDWFNOy0xO0cbYWrGBGn9E7kzbSZ78tUIjPUmmEKfk= =OOMl -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "These are only two small patches, one cleanup for arch/alpha and a preparation patch cleaning up the handling of runtime constants in the linker scripts" * tag 'asm-generic-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: runtime constants: move list of constants to vmlinux.lds.h alpha: no need to include asm/xchg.h twice |
||
|
Linus Torvalds
|
5e5466433d |
Char/Misc and other driver changes for 6.12-rc1
Here is the "big" set of char/misc and other driver subsystem changes for 6.12-rc1. Sorry for the delay, conference travel for the past two weeks has this and my other pull requests showing up real late in the cycle. Lots of changes in here, primarily dominated by the usual IIO driver updates and additions, but there are also small driver subsystem updates all over the place. Included in here are: - lots and lots of new IIO drivers and updates to existing ones - interconnect subsystem updates and new drivers - nvmem subsystem updates and new drivers - mhi driver updates - power supply subsystem updates - kobj_type const work for many different small subsystems - comedi driver fix - coresight subsystem and driver updates - fpga subsystem improvements - slimbus fixups - binder new feature addition for "frozen" notifications - lots and lots of other small driver updates and cleanups All of these have been in linux-next for a long time with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUxoA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykEnwCgnv9Q9tNrabLB2VXu8dRgMCee0J4AoIc5qA7/ mLXk2wxl5+dt/dfNgZIp =x5HV -----END PGP SIGNATURE----- Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystem changes for 6.12-rc1. Lots of changes in here, primarily dominated by the usual IIO driver updates and additions, but there are also small driver subsystem updates all over the place. Included in here are: - lots and lots of new IIO drivers and updates to existing ones - interconnect subsystem updates and new drivers - nvmem subsystem updates and new drivers - mhi driver updates - power supply subsystem updates - kobj_type const work for many different small subsystems - comedi driver fix - coresight subsystem and driver updates - fpga subsystem improvements - slimbus fixups - binder new feature addition for "frozen" notifications - lots and lots of other small driver updates and cleanups All of these have been in linux-next for a long time with no reported problems" * tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits) greybus: gb-beagleplay: Add firmware upload API arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7 dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios MAINTAINERS: Update path for U-Boot environment variables YAML nvmem: layouts: add U-Boot env layout comedi: ni_routing: tools: Check when the file could not be opened ocxl: Remove the unused declarations in headr file hpet: Fix the wrong format specifier uio: Constify struct kobj_type cxl: Constify struct kobj_type binder: modify the comment for binder_proc_unlock iio: adc: axp20x_adc: add support for AXP717 ADC dt-bindings: iio: adc: Add AXP717 compatible iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0 tools: iio: rm .*.cmd when make clean iio: adc: standardize on formatting for id match tables iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems ... |
||
|
Linus Torvalds
|
356a031945 |
TTY/Serial driver update for 6.12-rc1
Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup of
the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART engine
that that chip seems to have. Hopefully it's in a better state now,
but hardware designers still seem to come up with more ways to make
broken UARTS 40+ years after this all should have finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZvUz1w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymAhwCcCw/6BX3aKGTyx7ZxeMRc/mjbSLIAoMUv6bGT
6H04ZvcSd63ZotAWeZsn
=PWB8
-----END PGP SIGNATURE-----
Merge tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
|
||
|
Linus Torvalds
|
5701725692 |
Rust changes for v6.12
Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up objtool
warnings), teach objtool about 'noreturn' Rust symbols and mimic
'___ADDRESSABLE()' for 'module_{init,exit}'. With that, we should be
objtool-warning-free, so enable it to run for all Rust object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on change.
- Split helpers file into several files in a folder, to avoid conflicts
in it. Eventually those files will be moved to the right places with
the new build system. In addition, remove the need to manually export
the symbols defined there, reusing existing machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a 'ListArc'
exists using an atomic), 'ListLinks' (the prev/next pointers for an
item in a linked list), 'List' (the linked list itself), 'Iter' (an
iterator over a 'List'), 'Cursor' (a cursor into a 'List' that allows
to remove elements), 'ListArcField' (a field exclusively owned by a
'ListArc'), as well as support for heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the upcoming
Rust Binder. This includes 'RBTree' (the red-black tree itself),
'RBTreeNode' (a node), 'RBTreeNodeReservation' (a memory reservation
for a node), 'Iter' and 'IterMut' (immutable and mutable iterators),
'Cursor' (bidirectional cursor that allows to remove elements), as
well as an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the 'InPlaceWrite'
trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmbzNz4ACgkQGXyLc2ht
IW3muA/9HcPL0QqVB5+SqSRqcatmrFU/wq8Oaa6Z/No0JaynqyikK+R1WNokUd/5
WpQi4PC1OYV+ekyAuWdkooKmaSqagH5r53XlezNw+cM5zo8y7p0otVlbepQ0t3Ky
pVEmfDRIeSFXsKrg91BJUKyJf70TQlgSggDVCExlanfOjPz88C1+s3EcJ/XWYGKQ
cRk/XDdbF5eNaldp2MriVF0fw7XktgIrmVzxt/z0lb4PE7RaCAnO6gSQI+90Vb2d
zvyOYKS4AkqE3suFvDIIUlPUv+8XbACj0c4wvBZHH5uZGTbgWUffqygJ45GqChEt
c4fS/+E8VaM1z0EvxNczC0nQkfLwkTc1mgbP+sG3VZJMPVCJ2zQan1/ond7GqCpw
pt6uQaGvDsAvllm7sbiAIVaAY81icqyYWKfNBXLLEL7DhY5je5Wq+E83XQ8d5u5F
EuapnZhW3y12d6UCsSe9bD8W45NFoWHPXky1TzT+whTxnX1yH9YsPXbJceGSbbgd
Lw3GmUtZx2bVAMToVjNFD2lPA3OmPY1e2lk0jwzTuQrEXfnZYuzbjqs3YUijb7xR
AlsWfIb0IHBwHWpB7da24ezqWP2VD4eaDdD8/+LmDSj6XLngxMNWRLKmXT000eTW
vIFP9GJrvag2R3YFPhrurgGpRsp8HUTLtvcZROxp2JVQGQ7Z4Ww=
=52BN
-----END PGP SIGNATURE-----
Merge tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Support 'MITIGATION_{RETHUNK,RETPOLINE,SLS}' (which cleans up
objtool warnings), teach objtool about 'noreturn' Rust symbols and
mimic '___ADDRESSABLE()' for 'module_{init,exit}'. With that, we
should be objtool-warning-free, so enable it to run for all Rust
object files.
- KASAN (no 'SW_TAGS'), KCFI and shadow call sanitizer support.
- Support 'RUSTC_VERSION', including re-config and re-build on
change.
- Split helpers file into several files in a folder, to avoid
conflicts in it. Eventually those files will be moved to the right
places with the new build system. In addition, remove the need to
manually export the symbols defined there, reusing existing
machinery for that.
- Relax restriction on configurations with Rust + GCC plugins to just
the RANDSTRUCT plugin.
'kernel' crate:
- New 'list' module: doubly-linked linked list for use with reference
counted values, which is heavily used by the upcoming Rust Binder.
This includes 'ListArc' (a wrapper around 'Arc' that is guaranteed
unique for the given ID), 'AtomicTracker' (tracks whether a
'ListArc' exists using an atomic), 'ListLinks' (the prev/next
pointers for an item in a linked list), 'List' (the linked list
itself), 'Iter' (an iterator over a 'List'), 'Cursor' (a cursor
into a 'List' that allows to remove elements), 'ListArcField' (a
field exclusively owned by a 'ListArc'), as well as support for
heterogeneous lists.
- New 'rbtree' module: red-black tree abstractions used by the
upcoming Rust Binder.
This includes 'RBTree' (the red-black tree itself), 'RBTreeNode' (a
node), 'RBTreeNodeReservation' (a memory reservation for a node),
'Iter' and 'IterMut' (immutable and mutable iterators), 'Cursor'
(bidirectional cursor that allows to remove elements), as well as
an entry API similar to the Rust standard library one.
- 'init' module: add 'write_[pin_]init' methods and the
'InPlaceWrite' trait. Add the 'assert_pinned!' macro.
- 'sync' module: implement the 'InPlaceInit' trait for 'Arc' by
introducing an associated type in the trait.
- 'alloc' module: add 'drop_contents' method to 'BoxExt'.
- 'types' module: implement the 'ForeignOwnable' trait for
'Pin<Box<T>>' and improve the trait's documentation. In addition,
add the 'into_raw' method to the 'ARef' type.
- 'error' module: in preparation for the upcoming Rust support for
32-bit architectures, like arm, locally allow Clippy lint for
those.
Documentation:
- https://rust.docs.kernel.org has been announced, so link to it.
- Enable rustdoc's "jump to definition" feature, making its output a
bit closer to the experience in a cross-referencer.
- Debian Testing now also provides recent Rust releases (outside of
the freeze period), so add it to the list.
MAINTAINERS:
- Trevor is joining as reviewer of the "RUST" entry.
And a few other small bits"
* tag 'rust-6.12' of https://github.com/Rust-for-Linux/linux: (54 commits)
kasan: rust: Add KASAN smoke test via UAF
kbuild: rust: Enable KASAN support
rust: kasan: Rust does not support KHWASAN
kbuild: rust: Define probing macros for rustc
kasan: simplify and clarify Makefile
rust: cfi: add support for CFI_CLANG with Rust
cfi: add CONFIG_CFI_ICALL_NORMALIZE_INTEGERS
rust: support for shadow call stack sanitizer
docs: rust: include other expressions in conditional compilation section
kbuild: rust: replace proc macros dependency on `core.o` with the version text
kbuild: rust: rebuild if the version text changes
kbuild: rust: re-run Kconfig if the version text changes
kbuild: rust: add `CONFIG_RUSTC_VERSION`
rust: avoid `box_uninit_write` feature
MAINTAINERS: add Trevor Gross as Rust reviewer
rust: rbtree: add `RBTree::entry`
rust: rbtree: add cursor
rust: rbtree: add mutable iterator
rust: rbtree: add iterator
rust: rbtree: add red-black tree implementation backed by the C version
...
|
||
|
Linus Torvalds
|
4e2c9cd7dc |
i2c-for-6.12-rc1
I2C core
========
After 15 years of deprecation, the I2C_COMPAT symbol has finally been
removed. Also client addresses are now locked during initialization to
prevent race conditions between different kinds of instantiation. Scoped
foreach OF child loops are now used. And the testunit has received some
cleanups and documentation improvements as well as two new tests, one
for repeated start and one for triggering SMBusAlert interrupts.
I2C host drivers
================
The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.
The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.
Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.
Follows the list of the rest of the changes grouped by type of
change.
Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.
The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.
The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.
Constified a few global data structures in the virtio driver.
The Renesas driver simplifies the bus speed handling in the init
function making it more readable.
Improved an if/else statement in probe function of the Renesas
R-Car driver.
The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().
Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.
Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.
Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.
Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.
The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.
In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.
New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.
New support
-----------
Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.
Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.
Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.
The i2c-sprd binding has been converted to YAML.
AT24 updates
============
- document a new model from giantec in DT bindings
-----BEGIN PGP SIGNATURE-----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=DTNY
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
||
|
Linus Torvalds
|
3a37872316 |
pci-v6.12-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmbseugUHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vxdwxAAvdvDyTuiPo2R8pQtvKg4YL2IUnK5
UR28mBxZDK5DFhLtD/QzmVVG/eaLY6bJHthHgJgTApzekkqU0h9dcRI0eegXrvcz
I3HRsZK2yatUky9l8O148OLzF897r7vXL3QtGe6qjKU+9D83IEeooLKgBca+GoBC
bRLvG/fYRzdjOe8UHFqCoeMIg3IOY7CNifvFOihAGpJpxfZQktj6hSKu6q7BL1Rx
NRgYlxh0eLcb7vAJqz6RZpQ8PRCwhAjlDuu0BOkES8/6EwisD1xUh3qdDxfVgNA6
FpcAb/53yr46cs4tM9ZTwluka86AskuXj3jwSKf7nE3zqr4nM9OD3sGOSYzK8UdE
EDBKj+9iEpYRC6rJMk5gNH2AZkR1OEpNUisR6+kEn81A9yNNoTmkHdHUOWo8TuxD
btc0sTM+eWApvTiZwgL4VjMZulQllV51K8tcfvODRhlMkbOPNWGWdmpWqEbUS2HU
i7+zzQC3DC5iPlAKgRSeYB0aad6la6brqPW16sGhGovNhgwbzakDLCUJJGn/LNuO
wd0UNpJTnHlfChbvNh2bBxiMOo0cab1tJ5Jp97STQYhLg2nW93s/dAfdpSAsYO4S
5YzjSADWeyeuDsHE1RdUdDvYAPMb1VZBUd2OSHis5zw7kmh25c9KYXEkDJ25q/ju
sVXK4oMNW/Gnd5M=
=L3s9
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
||
|
Linus Torvalds
|
440b652328 |
bpf-next-6.12
-----BEGIN PGP SIGNATURE-----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=MDwh
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
|
||
|
Linus Torvalds
|
7856a56541 |
Many singleton patches - please see the various changelogs for details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
"mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to
provide (much) more accurate results. The current implementation was
causing Uwe some issues in the PWM drivers.
"xz: Updates to license, filters, and compression options" from Lasse
Collin. Miscellaneous maintenance and kinor feature work to the xz
decompressor.
"Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee.
Fixes and enhancements to the gdb scripts.
"treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson.
Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this.
"nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds
various commonly-available ioctls to nilfs2.
"This series fixes a number of formatting issues in kernel doc comments"
from Ryusuke Konishi does that.
"nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix
issues where -ENOENT was being unintentionally and inappropriately
returned to userspace.
"nilfs2: assorted cleanups" from Huang Xiaojia.
"nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2 filesystems.
"scripts/decode_stacktrace.sh: improve error reporting and usability" from
Luca Ceresoli does those things.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu7dpAAKCRDdBJ7gKXxA
jsPqAPwMDEZyKlfSw7QioEHNHDkmkbP7VYCYR0CbUnppbztwpAD8D37aVbWQ+UzM
3nnOq3W2Pc2o/20zqi8Upf1mnvUrygQ=
=/NWE
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
||
|
Linus Torvalds
|
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
||
|
Linus Torvalds
|
baeb9a7d8b |
Enable PREEMPT_RT on supported architectures:
After twenty years of development we finally reached the point to enable PREEMPT_RT support in the mainline kernel. All prerequisites are merged, so enable it on the supported architectures ARM64, RISCV and X86(32/64-bit). -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmbpR28THHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZXyD/972yR+oUuGNu8mb02H4kEcOCrsMOuM gMAneOjJY7+m4P2ois1gPoK6aPCT6AUlQj6DxOwjOhlmpWV6TaznymiVkKVZMhiT hRm5mWGxjXFtak/cnNixzAy/FsVGzBkQ/urPRfjb8MOGN9+9AOwmenXWsKUziaq9 b/XrovT1nkr5DA7fTbKa8Mw4+9PpZC5HacAfZwtbtPhKX7CbbCQugjMcrzN3h17/ g2EOPBLORfaEdWtnce6ZW+LZJ7y9dLdodoE6S2vZg/PfobsHqKhw7Kkw/Wr/iB1/ dHWps2b55X+3Oo410vm7Q4sEHY2Z4n0a51mHR7N2pqsEZLke+70SQuQ9MU7JRAKv ospsscPKCnbG4T4XYk8k3g56bbuu1xHnfGYFA6vhE48IrHMB/601lkH5Z5Xl2a3W x7wrXRuAwkPuLxiTRSp3MH3asq8cwBZKXMVelC7ctr6QqQbF3DSJFbyWezIvP+kz IyI7L3CcRYtExW8wY5ocXvMmwCDzz7XaQL9cqegLtkyxPd3CifzcDc9T8vWd6Zec PLMHBOFEaBWy+AsiOevvpSmy1kE8Ncm29xqafP06MyECAPQRzaexwVVBA5zalXIG zHyd0KdrVE1vix82JKGPn7ngDxdZPR6AEXc1NE1135fBCzSYM15T3JYrGXTzhFR1 c+Qo+hqOoKztbQ== =+vJ6 -----END PGP SIGNATURE----- Merge tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT enablement from Thomas Gleixner: "Enable PREEMPT_RT on supported architectures: After twenty years of development we finally reached the point to enable PREEMPT_RT support in the mainline kernel. All prerequisites are merged, so enable it on the supported architectures ARM64, RISCV and X86(32/64-bit)" * tag 'sched-rt-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: riscv: Allow to enable PREEMPT_RT. arm64: Allow to enable PREEMPT_RT. x86: Allow to enable PREEMPT_RT. |
||
|
Linus Torvalds
|
726e2d0cf2 |
dma-mapping updates for linux 6.12
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
||
|
Linus Torvalds
|
4a39ac5b7d |
Random number generator updates for Linux 6.12-rc1.
-----BEGIN PGP SIGNATURE-----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=mWCw
-----END PGP SIGNATURE-----
Merge tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
||
|
Linus Torvalds
|
067610ebaa |
RCU pull request for v6.12
This pull request contains the following branches:
context_tracking.15.08.24a: Rename context tracking state related
symbols and remove references to "dynticks" in various context
tracking state variables and related helpers; force
context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section.
csd.lock.15.08.24a: Enhance CSD-lock diagnostic reports; add an API
to provide an indication of ongoing CSD-lock stall.
nocb.09.09.24a: Update and simplify RCU nocb code to handle
(de-)offloading of callbacks only for offline CPUs; fix RT
throttling hrtimer being armed from offline CPU.
rcutorture.14.08.24a: Remove redundant rcu_torture_ops get_gp_completed
fields; add SRCU ->same_gp_state and ->get_comp_state
functions; add generic test for NUM_ACTIVE_*RCU_POLL* for
testing RCU and SRCU polled grace periods; add CFcommon.arch
for arch-specific Kconfig options; print number of update types
in rcu_torture_write_types();
add rcutree.nohz_full_patience_delay testing to the TREE07
scenario; add a stall_cpu_repeat module parameter to test
repeated CPU stalls; add argument to limit number of CPUs a
guest OS can use in torture.sh;
rcustall.09.09.24a: Abbreviate RCU CPU stall warnings during CSD-lock
stalls; Allow dump_cpu_task() to be called without disabling
preemption; defer printing stall-warning backtrace when holding
rcu_node lock.
srcu.12.08.24a: Make SRCU gp seq wrap-around faster; add KCSAN checks
for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays; mark idle SRCU-barrier
callbacks to help identify stuck SRCU-barrier callback.
rcu.tasks.14.08.24a: Remove RCU Tasks Rude asynchronous APIs as they
are no longer used; stop testing RCU Tasks Rude asynchronous
APIs; fix access to non-existent percpu regions; check
processor-ID assumptions during chosen CPU calculation for
callback enqueuing; update description of rtp->tasks_gp_seq
grace-period sequence number; add rcu_barrier_cb_is_done()
to identify whether a given rcu_barrier callback is stuck;
mark idle Tasks-RCU-barrier callbacks; add
*torture_stats_print() functions to print detailed
diagnostics for Tasks-RCU variants; capture start time of
rcu_barrier_tasks*() operation to help distinguish a hung
barrier operation from a long series of barrier operations.
rcu_scaling_tests.15.08.24a:
refscale: Add a TINY scenario to support tests of Tiny RCU
and Tiny SRCU; Optimize process_durations() operation;
rcuscale: Dump stacks of stalled rcu_scale_writer() instances;
dump grace-period statistics when rcu_scale_writer() stalls;
mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks; print detailed grace-period and barrier diagnostics
on rcu_scale_writer() hangs for Tasks-RCU variants; warn if
async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude;
make all writer tasks report upon hang; tolerate repeated
GFP_KERNEL failure in rcu_scale_writer(); use special allocator
for rcu_scale_writer(); NULL out top-level pointers to heap
memory to avoid double-free bugs on modprobe failures; maintain
per-task instead of per-CPU callbacks count to avoid any issues
with migration of either tasks or callbacks; constify struct
ref_scale_ops.
fixes.12.08.24a: Use system_unbound_wq for kfree_rcu work to avoid
disturbing isolated CPUs.
misc.11.08.24a: Warn on unexpected rcu_state.srs_done_tail state;
Better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines; annotate struct
kvfree_rcu_bulk_data with __counted_by().
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZt8+8wAKCRAAHS7/6Z0w
pTqoAPwPN//tlEoJx2PRs6t0q+nD1YNvnZawPaRmdzgdM8zJogD+PiSN+XhqRr80
jzyvMDU4Aa0wjUNP3XsCoaCxo7L/lQk=
=bZ9z
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
||
|
Paolo Bonzini
|
c09dd2bb57 |
Merge branch 'kvm-redo-enable-virt' into HEAD
Register KVM's cpuhp and syscore callbacks when enabling virtualization in hardware, as the sole purpose of said callbacks is to disable and re-enable virtualization as needed. The primary motivation for this series is to simplify dealing with enabling virtualization for Intel's TDX, which needs to enable virtualization when kvm-intel.ko is loaded, i.e. long before the first VM is created. That said, this is a nice cleanup on its own. By registering the callbacks on-demand, the callbacks themselves don't need to check kvm_usage_count, because their very existence implies a non-zero count. Patch 1 (re)adds a dedicated lock for kvm_usage_count. This avoids a lock ordering issue between cpus_read_lock() and kvm_lock. The lock ordering issue still exist in very rare cases, and will be fixed for good by switching vm_list to an (S)RCU-protected list. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Sebastian Andrzej Siewior
|
d8fccd9ca5 |
arm64: Allow to enable PREEMPT_RT.
It is really time. arm64 has all the required architecture related changes, that have been identified over time, in order to enable PREEMPT_RT. With the recent printk changes, the last known road block has been addressed. Allow to enable PREEMPT_RT on arm64. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/all/20240906111841.562402-3-bigeasy@linutronix.de |