The recent change to split reads into chunks has several problems:
1. If an SPI controller has no transfer size limit, max_chunk is
SIZE_MAX, and num_msgs becomes zero, causing no data to be read
into the buffer, and exposing the original contents of the buffer
to userspace,
2. If the requested read size is not a multiple of the maximum
transfer size, the last transfer reads too much data, overflowing
the buffer,
3. The loop logic differs from the write case.
Fix the above by:
1. Keeping track of the number of bytes that are still to be
transferred, instead of precalculating the number of messages and
keeping track of the number of bytes tranfered,
2. Calculating the transfer size of each individual message, taking
into account the number of bytes left,
3. Switching from a "while"-loop to a "do-while"-loop, and renaming
"msg_count" to "segment".
While at it, drop the superfluous cast from "unsigned int" to "unsigned
int", also from at25_ee_write(), where it was probably copied from.
Fixes: 0a35780c75 ("eeprom: at25: Split reads into chunks and cap write size")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7ae260778d2c08986348ea48ce02ef148100e088.1655817534.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make use of spi_max_transfer_size to avoid requesting transfers that are
too large for some spi controllers.
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220524215142.60047-1-eajames@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmH2lIMeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWzkH/jmR4RpGgrV5SUHF
8R6tsIjae1WItJ8NoaDgImWRxLKXFU7MM77HoFykuZx5Y5yz5Xf5zuJNXRPrHQbC
lE/8wqWut89LX0+k/pKSzt8BQbyZzImfm5rOSBpMC9VkvMcbuQ8NSJ/YbJOD4iAp
jfRRIkJtLQWL6YRc/xPlHCfVY5Qx+TkNZuFFckPtM2HKIEXS225VCESX9JcABDcQ
j7zG5bq/H+8qGItD2iUg8Nw9hqrLutdKSOgP29wxVOajY5QWVczYr1J0nfyRSPMb
/Xs1Oo1/+zO+dfCmR45puJZYua+e/iFTJv2RPFLRIE2AV1vMq4WNIgTJlq8DwfQK
C7Jq080=
=6u+c
-----END PGP SIGNATURE-----
Merge tag 'v5.17-rc2' into char-misc-next
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The at25 driver regressed in v5.17-rc1 due to a broken conflict
resolution: the allocation of the object was accidentally removed. Restore
it.
This was found when building under CONFIG_FORTIFY_SOURCE=y and
-Warray-bounds, which complained about strncpy() being used against an
empty object:
In function 'strncpy',
inlined from 'at25_fw_to_chip.constprop' at drivers/misc/eeprom/at25.c:312:2:
./include/linux/fortify-string.h:48:33: warning: '__builtin_strncpy' offset [0, 9] is out of the bounds [0, 0] [-Warray-bounds]
48 | #define __underlying_strncpy __builtin_strncpy
| ^
./include/linux/fortify-string.h:59:16: note: in expansion of macro '__underlying_strncpy'
59 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'at25_fram_to_chip' at drivers/misc/eeprom/at25.c:373:2,
inlined from 'at25_probe' at drivers/misc/eeprom/at25.c:453:10:
./include/linux/fortify-string.h:48:33: warning: '__builtin_strncpy' offset [0, 9] is out of the bounds [0, 0] [-Warray-bounds]
48 | #define __underlying_strncpy __builtin_strncpy
| ^
./include/linux/fortify-string.h:59:16: note: in expansion of macro '__underlying_strncpy'
59 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/lkml/CAHp75VdqK7h63fz-cPaQ2MGaVdaR2f1Fb5kKCZidUG3RwLsAVA@mail.gmail.com/
Fixes: af40d16042 ("Merge v5.15-rc5 into char-misc-next")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Prchal <jiri.prchal@aksignal.cz>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220118182003.3385019-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the fixes in here as well, and also resolve some merge conflicts
in:
drivers/misc/eeprom/at25.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make multi-line comment style aligned.
While at it, drop filename from the file.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split headers to three groups and sort alphabetically in each of them.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the similar way as it's done for EEPROM, factor out
a new helper function for FRAM.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's obvious that custom approach of getting power of 2 number with
int_pow() kinda interesting. Replace it and some others approaches
by using a simple BIT() operation.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to copy twice the same data. Drop needless local
variable.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Access to platform data via dev_get_platdata() getter to make code cleaner.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_property_read_u32() may return different error codes.
Unshadow them in the at25_fw_to_chip() to give better error
report.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently some values are compared against the contents of the chip structure
and most are from its updated copy in at25->chip. Use the latter one everywhere
in ->probe().
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125213203.86693-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Obviously the byte_len value should be checked from the chip
and not from at25->chip.
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125212729.86585-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even if we know that we are going to fill everything later on
it's bad style and fragile to copy garbage from the stack to
the data structure that will be used in the driver.
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125212729.86585-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit f60e707490 ("misc: at25: Make use of device property API")
made a good job by enabling the driver for non-OF platforms, but the
recent commit 604288bc61 ("nvmem: eeprom: at25: fix type compiler warnings")
brought that back.
Restore greatness of the driver once again.
Fixes: eab61fb1cc ("nvmem: eeprom: at25: fram discovery simplification")
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211125212729.86585-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit fd307a4ad3 ("nvmem: prepare basics for FRAM support") added
support for FRAM devices such as the Cypress FM25V. During testing, it
was found that the FRAM detects properly, however reads and writes fail.
Upon further investigation, two problem were found in at25_probe() routine.
1) In the case of an FRAM device without platform data, eg.
fram == true && spi->dev.platform_data == NULL
the stack local variable "struct spi_eeprom chip" is not initialized
fully, prior to being copied into at25->chip. The chip.flags field in
particular can cause problems.
2) The byte_len of FRAM is computed from its ID register, and is stored
into the stack local "struct spi_eeprom chip" structure. This happens
after the same structure has been copied into at25->chip. As a result,
at25->chip.byte_len does not contain the correct length of the device.
In turn this can cause checks at beginning of at25_ee_read() to fail
(or equally, it could allow reads beyond the end of the device length).
Fix both of these issues by eliminating the on-stack struct spi_eeprom.
Instead use the one inside at25_data structure, which starts of zeroed.
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org>
Link: https://lore.kernel.org/r/20211108181627.645638-1-ralph.siemsen@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210923172453.4921-1-broonie@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes:
drivers/misc/eeprom/at25.c:181:28: warning: field width should have type 'int', but argument has type 'unsigned long'
drivers/misc/eeprom/at25.c:386:13: warning: cast to smaller integer type 'int' from 'const void *'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Fixes: fd307a4ad3 ("nvmem: prepare basics for FRAM support")
Link: https://lore.kernel.org/r/20210611142706.27336-1-jiri.prchal@aksignal.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added enum and string for FRAM (ferroelectric RAM) to expose it as file
named "fram".
Added documentation of sysfs file.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Link: https://lore.kernel.org/r/20210611094601.95131-2-jiri.prchal@aksignal.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To save the interested reader some time, add examples of AT25 part
numbers that correspond to EEPROMs rather than flashes.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20201107133337.1066271-1-j.neuschaefer@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set type as NVMEM_TYPE_EEPROM to expose this info via
sysfs:
$ cat /sys/bus/nvmem/devices/{DEVICE}/type
EEPROM
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200916170933.20302-3-vadym.kochan@plvision.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Storage technologies like FRAM have no "write pages", the whole chip can
be written within one SPI transfer. For these chips, the page size can
be set equal to the device size. Currently available devices are already
bigger than 64 kiB.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Link: https://lore.kernel.org/r/20200727111218.26926-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/misc/eeprom/at25.c: In function 'at25_remove':
drivers/misc/eeprom/at25.c:384:20: warning:
variable 'at25' set but not used [-Wunused-but-set-variable]
Since commit 96d08fb43e ("eeprom: at25: use devm_nvmem_register()"),
at25_remove is do nothing, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Resolved checkpatch warning "sizeof t should be sizeof(t)"
issue found by checkpatch.
Signed-off-by: Devang Panchal <devang.panchal@softnautics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain EEPROMS have a size that is larger than the number of address
bytes would allow, and store the MSB of the address in bit 3 of the
instruction byte.
This can be described in platform data using EE_INSTR_BIT3_IS_ADDR, or
in DT using the obsolete legacy "at25,addr-mode" property.
But currently there exists no non-deprecated way to describe this in DT.
Hence extend the existing "address-width" DT property to allow
specifying 9 address bits, and enable support for that in the driver.
This has been tested with a Microchip 25LC040A.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch does the following:
- fixes specifiers and removes explicit casting of the parameters
- joins literals to one line
- increases readability of the parameters
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The at25 driver is using spi_dev_get() apparently just to take a copy
of the SPI device used to instantiate it but never calls spi_dev_put()
to free it. Since the device is guaranteed to exist between probe() and
remove() there should be no need for the driver to take an extra
reference to it so fix the leak by just using a straight assignment.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch moves to nvmem support in the driver to use callback instead
of regmap.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a regmap for accessing the EEPROM, and then use that with the
NVMEM framework. Enable backwards compatibility in the NVMEM config,
so that the 'eeprom' file in sys is provided by the framework.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The setup() callback is not used by any in kernel code. Remove it.
Any new code which requires access to the eeprom can use the NVMEM
API.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use kobj_to_dev() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An spi_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of device property API in this driver so that both DT and ACPI
based systems can use this driver.
In addition we hard-code the name of the chip to be "at25" for the
reason that there is no common mechanism to fetch name of the firmware
node. The only existing user (arch/arm/boot/dts/phy3250.dts) uses the
same name so it should continue to work.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit d6ae0d578d introduced devicetree
binding documentation for this driver, but the driver itself does not yet
support the documented compatible entry. Fix this by adding the documented
entry to the driver.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_kzalloc to make cleanup paths simpler
Signed-off-by: Nikolay Balandin <nbalandin@dev.rtsoft.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
