In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/net/dsa/microchip/ksz9477.c: In function ‘ksz9477_get_interface’:
drivers/net/dsa/microchip/ksz9477.c:1145:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (gbit)
^
drivers/net/dsa/microchip/ksz9477.c:1147:2: note: here
case 0:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
net/rxrpc/local_object.c: In function ‘rxrpc_open_socket’:
net/rxrpc/local_object.c:175:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (ret < 0) {
^
net/rxrpc/local_object.c:184:2: note: here
case AF_INET:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Currently, GCC is expecting to find the fall-through annotations
at the very bottom of the case and on its own line. That's why
I had to add the annotation, although the intentional fall-through
is already mentioned in a few lines above.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/gpu/drm/i915/gvt/display.c:457: warning: Function parameter or member 'connected' not described in 'intel_vgpu_emulate_hotplug'
drivers/gpu/drm/i915/gvt/display.c:457: warning: Excess function parameter 'conncted' description in 'intel_vgpu_emulate_hotplug'
Fixes: 1ca20f33df42 ("drm/i915/gvt: add hotplug emulation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
stride isn't in unit of pixel, it is bytes, so calculation of
plane size doesn't need to multiple bpp.
Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Pull HID fixes from Jiri Kosina:
- build dependency fix for hid-asus from Arnd Bergmann
- addition of omitted mapping of _ASSISTANT key from Dmitry Torokhov
- race condition fix in hid-debug inftastructure from He, Bo
- fixed support for devices with big maximum report size from Kai-Heng
Feng
- deadlock fix in hid-steam from Rodrigo Rivas Costa
- quite a few device-specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: input: add mapping for Assistant key
HID: i2c-hid: Disable runtime PM on Synaptics touchpad
HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630
HID: logitech: Handle 0 scroll events for the m560
HID: debug: fix race condition with between rdesc_show() and device removal
HID: logitech: check the return value of create_singlethread_workqueue
HID: Increase maximum report size allowed by hid_field_extract()
HID: steam: fix deadlock with input devices.
HID: uclogic: remove redudant duplicated null check on ver_ptr
HID: quirks: Drop misused kernel-doc annotation
HID: hid-asus: select CONFIG_POWER_SUPPLY
HID: quirks: use correct format chars in dbg_hid
Stanislav Fomichev says:
====================
This patch series fixes the existing BPF flow dissector API to
support calling BPF progs from the eth_get_headlen context (the
support itself will be added in bpf-next tree).
The summary of the changes:
* fix VLAN handling in bpf_flow.c, we don't need to peek back and look
at skb->vlan_present; add selftests
* pass and use flow_keys->n_proto instead of skb->protocol
* fix clamping of flow_keys->nhoff for packets with nhoff > 0
* prohibit access to most of the __sk_buff fields from BPF flow
dissector progs; only data/data_end/flow_keys are allowed (all input
is now passed via flow_keys)
* finally, document BPF flow dissector program environment
====================
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Petar Penkov <peterpenkov96@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Short doc on what BPF flow dissector should expect in the input
__sk_buff and flow_keys.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Use whitelist instead of a blacklist and allow only a small set of
fields that might be relevant in the context of flow dissector:
* data
* data_end
* flow_keys
This is required for the eth_get_headlen case where we have only a
chunk of data to dissect (i.e. trying to read the other skb fields
doesn't make sense).
Note, that it is a breaking API change! However, we've provided
flow_keys->n_proto as a substitute for skb->protocol; and there is
no need to manually handle skb->vlan_present. So even if we
break somebody, the migration is trivial. Unfortunately, we can't
support eth_get_headlen use-case without those breaking changes.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Don't allow BPF program to set flow_keys->nhoff to less than initial
value. We currently don't read the value afterwards in anything but
the tests, but it's still a good practice to return consistent
values to the test programs.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is a preparation for the next commit that would prohibit access to
the most fields of __sk_buff from the BPF programs.
Instead of requiring BPF flow dissector programs to look into skb,
pass all input data in the flow_keys.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When we tail call PROG(VLAN) from parse_eth_proto we don't need to peek
back to handle vlan proto because we didn't adjust nhoff/thoff yet. Use
flow_keys->n_proto, that we set in parse_eth_proto instead and
properly increment nhoff as well.
Also, always use skb->protocol and don't look at skb->vlan_present.
skb->vlan_present indicates that vlan information is stored out-of-band
in skb->vlan_{tci,proto} and vlan header is already pulled from skb.
That means, skb->vlan_present == true is not relevant for BPF flow
dissector.
Add simple test cases with VLAN tagged frames:
* single vlan for ipv4
* double vlan for ipv6
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
According to HUTRR89 usage 0x1cb from the consumer page was assigned to
allow launching desktop-aware assistant application, so let's add the
mapping.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since this driver only has a dependency on ARCH_SUNXI just because it
doesn't make any sense to run it on something else, we can definitely
enable it through COMPILE_TEST as well to get some build coverage.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE7btrcuORLb1XUhEwjrBW1T7ssS0FAlyifpcACgkQjrBW1T7s
sS23lxAA5Pw5pEsBOfCTW3ibpF1sZApMgTdDVzpHwNqY8dE+CUeVP+ps6G13bimE
1RAXeURwS/dCqjAIk9cqq5/jC8ZxDgZoZBGyACIV6MZ6JMaNwr75CvHSEqoWyD6U
QnQWPrP1C9vP70vc+pMT2ZH0m9Mi2ySSh24znNs6jKvODpucj0xql41ddCEItnDH
b0JY0V9tC1/RW50mKF4MvLqcFHgriMaX1ydSIDnILKMUpsHoO6aVKKYE4BCg4WWt
N7v8/s4YGz64pc5ZNwbNDfOyK1Np3quHVvE8mqcd1oupuYFEa5iUyewA3rywia+D
OcUEWoKEANTU9ZTnKMgRYzv11dRw87EdROsFGYJt0yyu/FgQevqa6/WN/7AKpvfw
YlOunFyzqkNfTULontnXH8NKI3Z85k6i6dSoZx/cL9WsoM+FH64Dy2bM68SMjk8w
wrM8bbM4Sw3RXHdU45laC1RHkZzamK2KsDHJFjHUIq3wEosUrFAawyTHZUfYzyRR
pUQ4Yg+yVQefM2J5HVLrxUPit77Cwx7mTk4jOCVnmrujPGKzi2tZpyYFL5CJgUMn
6cq9bSRoBF1xcx+xzK6eVG3CCI8E36GHwhWrqkwFiMjGfYBd52a8W5gjj51vHBHr
SBjcmbiaz8aEMOCgsFi3OOSfueiwGrJCS2EkezDnvyA4WoqDwIM=
=N+5Y
-----END PGP SIGNATURE-----
Merge tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull pidfd fix from Christian Brauner:
"This should be an uncontroversial fix for pidfd_send_signal() by Jann
to better align it's behavior with other signal sending functions:
In one of the early versions of the patchset it was suggested to not
unconditionally error out when a signal with SI_USER is sent to a
non-current task (cf. [1]).
Instead, pidfd_send_signal() currently silently changes this to a
regular kill signal. While this is technically fine, the semantics are
weird since the kernel just silently converts a user's request behind
their back and also no other signal sending function allows to do
this. It gets more hairy when we introduce sending signals to a
specific thread soon.
So let's align pidfd_send_signal() with all the other signal sending
functions and error out when SI_USER signals are sent to a non-current
task"
* tag 'pidfd-fixes-v5.1-rc3' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
signal: don't silently convert SI_USER signals to non-current pidfd
The @linaro version won't be valid much longer.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The rlc reset function is not necessary during gfx9 initialization/resume phase.
And this function would even cause rlc fw loading failed on some gfx9 ASIC.
Remove this function safely with verification well on Vega/Raven platform.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-04-01
This series contains two fixes for XDP in the i40e driver.
Björn provides both fixes, first moving a function out of the header and
into the main.c file. Second fixes a regression introduced in an
earlier patch that removed umem from the VSI. This caused an issue
because the setup code would try to enable AF_XDP zero copy
unconditionally, as long as there was a umem placed in the netdev
receive structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Action tunnel_key doesn't have a metadata/tunnel for release(decap) action.
Drivers do not dereference entry->tunnel pointer for that action type, so
this behavior doesn't result in a crash at the moment. However, this needs
to be corrected as a preparation for updating hardware offloads API to not
rely on rtnl lock, for which flow_action code will copy the tunnel data to
temporary buffer to prevent concurrent action overwrite from
invalidating/freeing it.
Fixes: 3a7b68617de7 ("cls_api: add translator to flow_action representation")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device type for ip6 tunnels is set to
ARPHRD_TUNNEL6. However, the ip4ip6_err function
is expecting the device type of the tunnel to be
ARPHRD_TUNNEL. Since the device types do not
match, the function exits and the ICMP error
packet is not sent to the originating host. Note
that the device type for IPv4 tunnels is set to
ARPHRD_TUNNEL.
Fix is to expect a tunnel device type of
ARPHRD_TUNNEL6 instead. Now the tunnel device
type matches and the ICMP error packet is sent
to the originating host.
Signed-off-by: Sheena Mira-ato <sheena.mira-ato@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
net: phy: improve genphy_c45_read_lpa
This series improves genphy_c45_read_lpa:
- Use clause 45 standard register / bit to detect link partner autoneg
capability.
- Consider that lpa register values may be invalid if "autoneg complete"
bit isn't set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The link partner advertisement registers are not guaranteed to contain
valid values if autoneg is incomplete. Therefore, if
MDIO_AN_STAT1_COMPLETE isn't set, let's clear all link partner
capability bits. This also avoids unnecessary register reads if link
is down and phylib is in polling mode.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently mii_lpa_mod_linkmode_lpa_t() checks bit LPA_LPACK to detect
whether link partner supports autoneg. This doesn't work correctly at
least on Aquantia AQCS109 when it negotiates 1000Base-T2 mode.
The "link partner is autoneg-capable" bit as defined by clause 45 is
set however. Better let's switch in general to use the clause 45
standard for link partner autoneg detection.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit says:
====================
net: phy: add and use new function genphy_read_abilities
Similar to genphy_c45_pma_read_abilities() add a function to dynamically
detect the abilities of a Clause 22 PHY. This is mainly copied from
genphy_config_init(). Main benefit is that PHY drivers no longer have
to specify whether they support GBit or not (provided they keep to
the C22 standard).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use new function genphy_read_abilities(). This allows to remove all
calls to genphy_config_init().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the genphy driver populates phydev->supported like this:
First all possible feature bits are set, then genphy_config_init()
reads the available features from the chip and remove all unsupported
features from phydev->supported. This can be simplified by using
genphy_read_abilities().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to genphy_c45_pma_read_abilities() add a function to dynamically
detect the abilities of a Clause 22 PHY. This is mainly copied from
genphy_config_init().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We free "ct_info->ct" and then use it on the next line when we pass it
to nf_ct_destroy_timeout(). This patch swaps the order to avoid the use
after free.
Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make tg3 behave like other drivers and let "ethtool -p" identify the
NIC even when it's in the DOWN state. Before this patch it would get an
error as follows if the NIC was down:
# ip link set down dev em4
# ethtool -p em4
Cannot identify NIC: Resource temporarily unavailable
With this patch ethtool identify works regardless of whether the NIC is up
or down as it does for other drivers.
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should use SoC compatible string in stead of wildcard string for
PMIC child devices.
Fixes: 0419a75b1808 (arm64: dts: sprd: Remove wildcard compatible string)
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Since commit 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
on gta04 we have handle_twl4030_pih() called in situations where pm_runtime_get()
in i2c-omap.c returns -EACCES.
[ 86.474365] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 86.485473] printk: Suspending console(s) (use no_console_suspend to debug)
[ 86.555572] Disabling non-boot CPUs ...
[ 86.555664] Successfully put all powerdomains to target state
[ 86.563720] twl: Read failed (mod 1, reg 0x01 count 1)
[ 86.563751] twl4030: I2C error -13 reading PIH ISR
[ 86.563812] twl: Read failed (mod 1, reg 0x01 count 1)
[ 86.563812] twl4030: I2C error -13 reading PIH ISR
[ 86.563873] twl: Read failed (mod 1, reg 0x01 count 1)
[ 86.563903] twl4030: I2C error -13 reading PIH ISR
This happens when we wakeup via something behing twl4030 (powerbutton or rtc
alarm). This goes on for minutes until the system is finally resumed.
Disable the irq on suspend and enable it on resume to avoid
having i2c access problems when the irq registers are checked.
Fixes: 6e2bd956936 ("i2c: omap: Use noirq system sleep pm ops to idle device for suspend")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
seen with debug config:
drivers/net/macsec.c: In function 'dump_secy':
drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger
than 2048 bytes [-Wframe-larger-than=]
just mark it with noinline_for_stack, this is netlink dump code.
v2: use 'static noinline_for_stack int' consistently
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
net: move skb->xmit_more to percpu softnet data
Eric Dumazet mentioned we could place xmit_more hint in same
spot as device xmit recursion counter, instead of using
an sk_buff flag bit.
This series places xmit_recursion counter and xmit_more hint
in softnet data, filling a hole.
After this, skb->xmit_more is always zero. Drivers are converted
to use "netdev_xmit_more()" helper instead.
Last patch removes the skb->xmit_more flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the last driver using always-0 skb->xmit_more.
Switch it to netdev_xmit_more and remove the now unused xmit_more flag
from sk_buff.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->xmit_more hint is now always 0, this switches the sfc driver to
use the netdev_xmit_more helper instead.
Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
Cc: Edward Cree <ecree@solarflare.com>
Cc: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->xmit_more hint is now always 0. This switches the mellanox drivers
to the netdev_xmit_more() helper.
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Ilya Lesokhin <ilyal@mellanox.com>
Cc: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two reasons for this.
First, the xmit_more flag conceptually doesn't fit into the skb, as
xmit_more is not a property related to the skb.
Its only a hint to the driver that the stack is about to transmit another
packet immediately.
Second, it was only done this way to not have to pass another argument
to ndo_start_xmit().
We can place xmit_more in the softnet data, next to the device recursion.
The recursion counter is already written to on each transmit. The "more"
indicator is placed right next to it.
Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more
to check the "more packets coming" hint.
skb->xmit_more is retained (but always 0) to not cause build breakage.
This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/
conversions. Remaining drivers are converted in the next patches.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fills a hole in softnet data, so no change in structure size.
Also prepares for xmit_more placement in the same spot;
skb->xmit_more will be removed in followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
If dccp_feat_push_change fails, we forget free the mem
which is alloced by kmemdup in dccp_feat_clone_sp_val.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e8ef967a54f4 ("dccp: Registration routines for changing feature values")
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The AQR107 family has SGMII statistics counters. Let's expose them to
ethtool. To interpret the counters correctly one has to be aware that
rx on SGMII side is tx on ethernet side. The counters are populated
by the chip in 100Mbps/1Gbps mode only.
v2:
- add constant AQR107_SGMII_STAT_SZ
- add struct aqr107_priv to be prepared for more private data fields
- let aqr107_get_stat() return U64_MAX in case of an error
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Eric noticed, in .sk_destruct, sk->sk_dst_cache update is prevented, and
no barrier is needed for this. So change to use rcu_dereference_protected()
instead of rcu_dereference_check() to fetch sk_dst_cache in there.
v1->v2:
- no change, repost after net-next is open.
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot report a kernel-infoleak:
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
Call Trace:
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:174 [inline]
sctp_getsockopt_peer_addrs net/sctp/socket.c:5911 [inline]
sctp_getsockopt+0x1668e/0x17f70 net/sctp/socket.c:7562
...
Uninit was stored to memory at:
sctp_transport_init net/sctp/transport.c:61 [inline]
sctp_transport_new+0x16d/0x9a0 net/sctp/transport.c:115
sctp_assoc_add_peer+0x532/0x1f70 net/sctp/associola.c:637
sctp_process_param net/sctp/sm_make_chunk.c:2548 [inline]
sctp_process_init+0x1a1b/0x3ed0 net/sctp/sm_make_chunk.c:2361
...
Bytes 8-15 of 16 are uninitialized
It was caused by that th _pad field (the 8-15 bytes) of a v4 addr (saved in
struct sockaddr_in) wasn't initialized, but directly copied to user memory
in sctp_getsockopt_peer_addrs().
So fix it by calling memset(addr->v4.sin_zero, 0, 8) to initialize _pad of
sockaddr_in before copying it to user memory in sctp_v4_addr_to_user(), as
sctp_v6_addr_to_user() does.
Reported-by: syzbot+86b5c7c236a22616a72f@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Alexander Potapenko <glider@google.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch improves few aspects of genphy_read_status():
- Don't initialize lpagb, it's not needed.
- Move initializing phydev->speed et al before the if clause.
- In auto-neg case, skip populating lp_advertising if we
don't have a link. This avoids quite some unnecessary
MDIO reads in case of phylib polling mode.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
nfp: flower improvement and SFF module EEPROM
The first patch in this series from Pieter improves the
handling of mangle actions in TC flower offload. These
used to be sent down to the driver in groups, but after
Pablo N's patches they are split out causing suboptimal
expression.
The ramaining two patches from Dirk add support for reading
SFF module EEPROM data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the NSP provides the ability to read from the SFF modules'
EEPROM, we can use this interface to implement the ethtool callback.
If the NSP only provides partial data, we log the event from within
the driver but pass a success code to ethtool to prevent it from
discarding the partial data.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NSP now provides the ability to read from the SFF module EEPROM.
Note that even if an error occurs, the NSP may still provide some of the
data.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of flow_action_for_each pedit actions are no
longer grouped together, instead pedit actions are broken out per
32 byte word. This results in an inefficient use of the action list
that is pushed to hardware where each 32 byte word becomes its own
action. Therefore we combine groups of 32 byte word before sending
the action list to hardware.
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
nfp: flower: fix matching and pushing vlan CFI bit
This patch clears up some confusion around the meaning of bit 12
for FW messages related to VLAN and flower offload.
Pieter says:
It fixes issues with matching, pushing and popping vlan tags.
We replace the vlan CFI bit with a vlan present bit that
indicates the presence of a vlan tag. We also no longer set
the CFI when pushing vlan tags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We no longer set CFI when pushing vlan tags, therefore we remove
the CFI bit from push vlan.
Fixes: 1a1e586f54bf ("nfp: add basic action capabilities to flower offloads")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
