* Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address range
with 4KB and 16KB pages
* Enable Rust on arm64
* Support for the 2023 dpISA extensions (data processing ISA), host only
* arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a shared
L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
* Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation for
NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done via a
trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously disabled
due to gcc silently ignoring -falign-functions=N)
-----BEGIN PGP SIGNATURE-----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=KTD/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
pages), the dpISA extension and Rust enabled on arm64. The changes are
mostly contained within the usual arch/arm64/, drivers/perf, the arm64
Documentation and kselftests. The exception is the Rust support which
touches some generic build files.
Summary:
- Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
range with 4KB and 16KB pages
- Enable Rust on arm64
- Support for the 2023 dpISA extensions (data processing ISA), host
only
- arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a
shared L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
- Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation
for NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done
via a trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
disabled due to gcc silently ignoring -falign-functions=N)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
Revert "mm: add arch hook to validate mmap() prot flags"
Revert "arm64: mm: add support for WXN memory translation attribute"
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
...
- Make PSTORE_RAM available by default on arm64 (Nícolas F. R. A. Prado)
- Allow for dynamic initialization in modular build (Guilherme G. Piccoli)
- Add missing allocation failure check (Kunwu Chan)
- Avoid duplicate memory zeroing (Christophe JAILLET)
- Avoid potential double-free during pstorefs umount
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmXvlFsWHGtlZXNjb29r
QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJiR3D/0XGJYNL/jv5aF4J1Bsb21k7Hk0
hfJYzYpQxvV4sNr7U91ELAYlS/V8Sm3s5qna/MyyQVcLHPAqE89yM6RTDlDMYbXr
fgJgwYbsQEu0zvBgMSYQFkS9UQ1/Pj8gxteOIIHAepuCjDKMQgSbfQOOZ8R/8o73
LuR8tVIlSW8JnUxDrrTHn8Mkn07HOInWTfmaA8HypdMOF3Rs0baDdABGB5CXAHan
/a8VkazN9IDtGFJk9HB3tmwlSdzDF4at2bhwAgfQcisb2fhAbKN6n6jRW3564XNE
5JH50JBJcE8Zc1RpbD4XT5ClqXPj9BvOLgbGAcbgZbmjuqxdQcDMJ1IwAmIsIHTG
fT/6/MN4m5uuc7tik1Y3igpkiYiNr0itcOBI6iyT70Hj5p0IRR3DYxtV47RQsb5j
1jBI6vtcmrwzOP8tKdrPlZ4iUl+wm7d5UjHleQZjpST3Rtm3an/TEuU3C7xVWKDf
+LAb+vIao071L2JzNLwEKHAIEtcV9vtsM9I4ApoeC9gh80pW+OdfwfqiEkK3+Ht3
Sk7u6ez45SDlJtx1amE+kA7qbaFEZxSDerWQ32pqb7bzrKWEtdFATdYL6eBPJItm
V1c+I4fYv6udjUH1igwNUKWsxLgQ0KvRv1AtvrBtgfTrq2WuuplTxPbh1l+jGt/4
nbu9FVNKLErrGGkK3Q==
=xe9R
-----END PGP SIGNATURE-----
Merge tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Make PSTORE_RAM available by default on arm64 (Nícolas F R A Prado)
- Allow for dynamic initialization in modular build (Guilherme G
Piccoli)
- Add missing allocation failure check (Kunwu Chan)
- Avoid duplicate memory zeroing (Christophe JAILLET)
- Avoid potential double-free during pstorefs umount
* tag 'pstore-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/zone: Don't clear memory twice
pstore/zone: Add a null pointer check to the psz_kmsg_read
efi: pstore: Allow dynamic initialization based on module parameter
arm64: defconfig: Enable PSTORE_RAM
pstore/ram: Register to module device table
pstore: inode: Only d_invalidate() is needed
Enable the cbmem driver and dependencies in order to support reading
cbmem entries from the coreboot table, which are used to store logs from
coreboot on arm64 Chromebooks, and provide useful information for
debugging the boot process on those devices.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240304-coreboot-defconfig-v1-1-02dc1940408f@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable the Qualcomm PBS driver to resolve the dependency from the Light
Pulse Generator (LED-driver) on modern Qualcomm platforms. Enable the
X1E multimedia clock controllers, to provide clocks for the various
multimedia blocks. Enable Global clock controller and interconnect
drivers for the QDU1000/QRU1000 platforms.
Enable the audio drivers and the Goodi Berlin touchscreen driver, used
on SM8650 QRD.
Enable the MAX20411 regulator driver drive the GPU rail on SA8295P.
Lastly mark the Qualcomm interconnect providers that feeds UART
instances as builtin, to ensure the console exists when userspace is
launched.
-----BEGIN PGP SIGNATURE-----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=FjXL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=x7hX
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm ARM64 defconfig updates for v6.9
Enable the Qualcomm PBS driver to resolve the dependency from the Light
Pulse Generator (LED-driver) on modern Qualcomm platforms. Enable the
X1E multimedia clock controllers, to provide clocks for the various
multimedia blocks. Enable Global clock controller and interconnect
drivers for the QDU1000/QRU1000 platforms.
Enable the audio drivers and the Goodi Berlin touchscreen driver, used
on SM8650 QRD.
Enable the MAX20411 regulator driver drive the GPU rail on SA8295P.
Lastly mark the Qualcomm interconnect providers that feeds UART
instances as builtin, to ensure the console exists when userspace is
launched.
* tag 'qcom-arm64-defconfig-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable QCOM PBS
arm64: deconfig: enable Goodix Berlin SPI touchscreen driver as module
arm64: defconfig: Enable X1E80100 multimedia clock controllers configs
arm64: defconfig: Enable GCC and interconnect for QDU1000/QRU1000
arm64: defconfig: enable WCD939x USBSS driver as module
arm64: defconfig: enable audio drivers for SM8650 QRD board
arm64: defconfig: Enable Qualcomm interconnect providers
arm64: defconfig: Enable MAX20411 regulator driver
Link: https://lore.kernel.org/r/20240225032456.481112-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ext4 filesystem can mount ext2, so drop CONFIG_EXT2_FS to make builds a
bit faster. Drop also redundant CONFIG_EXT3_FS, because it just
selectes EXT4_FS.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240221155033.44160-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable support for the Rockchip HDMI/eDP Combo PHY, which is based on a
Samsung IP block. This is used by the RK3588 SoC family.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240219203725.283532-1-cristian.ciocaltea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable PSTORE_RAM, that is the ramoops driver, in the defconfig, to
allow logging and retrieving panics and oopses to/from RAM automatically
for platforms that have a ramoops reserved memory node in DT.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20240110210600.787703-3-nfraprado@collabora.com
Signed-off-by: Kees Cook <keescook@chromium.org>
- Disable obsolete board staging support in the Renesas ARM and ARM V7
multi-platform defconfigs,
- Enable support for the Renesas R-Car V4M (R8A779H0) SoC in the ARM64
defconfig.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZcYucgAKCRCKwlD9ZEnx
cFKJAQCpdfJuHtpm6sDIv6JWuVmmDMOHwRw7tQ5UNeYRZMXuHAEAt4R+6mYRTo4L
LCWTcwzprYeOnEO/4Oemnv3CTDiA6Ag=
=oJfk
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BT6t
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-defconfig-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.9
- Disable obsolete board staging support in the Renesas ARM and ARM V7
multi-platform defconfigs,
- Enable support for the Renesas R-Car V4M (R8A779H0) SoC in the ARM64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R8A779H0 SoC
ARM: multi_v7_defconfig: Disable board staging
ARM: shmobile: defconfig: Disable staging
Link: https://lore.kernel.org/r/cover.1707487828.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We typically enable support in defconfig for all architectural features
for which we can detect at runtime if the hardware actually supports
them.
Now that we have implemented support for LPA2 based 52-bit virtual
addressing in a way that should not impact 48-bit operation on non-LPA2
CPU, we can do the same, and enable 52-bit virtual addressing by
default.
Catalin adds:
Currently the "Virtual address space size" arch/arm64/Kconfig menu
entry sets different defaults for each page size. However, all are
overridden by the defconfig to 48 bits. Set the new default in
Kconfig and remove the defconfig line.
[ardb: squash follow-up fix from Catalin]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240214122845.2033971-86-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add the QDU1000/QRU1000 GCC and interconnect drivers as built-in.
These are necessary for the Qualcomm QDU1000/QRU1000 platform to boot
to shell.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240213095459.18402-1-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the i.MX8MP LDB driver used for display support of the i.MX8MP
LVDS interface.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The vf610 gpio driver is used in i.MX8QM, DXL, ULP and i.MX93 chips.
Enable it in arm64 defconfig.
(vf610 gpio used to be enabled by default for all i.MX chips. This was
changed recently as most i.MX chips don't need this driver.)
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With interconnect providers built as modules Qualcomm SM8250 and QCM2290
platforms launches init without /dev/console being backed by the debug
UART.
Build there drivers into the kernel, to make sure the dependencies for
the UART driver are available and thereby give userspace access to the
UART without having to re-open the console, once the deferred UART
driver has probed.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240201-enable-icc-8250-2290-v1-1-8ded02750521@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These drivers are used on i.MX8QXP based devices.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Qualcomm SA8295P ADP board uses a max20411 to power the GPU
subsystem.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240125-sa8295p-gpu-v4-8-7011c2a63037@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
A number of options got reorganized over time wihtin Kconfig, so make sure
everything is where it belongs in order to simplify defconfig changes
again in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This enables the base drivers necessary to boot devices on the X1E
platform.
The GPU clock controller for SM8450/SM8550 is enabled and the SC8280XP
camera clock controller is enabled, to enable respective functionality
on these platforms.
-----BEGIN PGP SIGNATURE-----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=gd3I
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L0cS
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
A few more Qualcomm Arm64 defconfig updates for v6.8
This enables the base drivers necessary to boot devices on the X1E
platform.
The GPU clock controller for SM8450/SM8550 is enabled and the SC8280XP
camera clock controller is enabled, to enable respective functionality
on these platforms.
* tag 'qcom-arm64-defconfig-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SC8280XP camera clock controller
arm64: defconfig: enable GPU clock controller for SM8[45]50
arm64: defconfig: Enable X1E80100 SoC base configs
Link: https://lore.kernel.org/r/20231231034648.3262882-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With the camera clock controller added to the DeviceTree of SC8280XP the
interconnect providers no longer reaches sync_state, resulting in a
noticeable reduction in battery life.
Enable the camera clock controller (as a module) to avoid this, and
hopefully soon provide some level of camera support.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231221-enable-sc8280xp-camcc-v1-1-2249581dd538@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Those defconfig changes enable booting the MT8173 Chromebooks with the
enablement of the DA9211 regulator driver and adds modules for sound,
AudioDSP, DisplayPort and LVTS Thermal for MT8192/MT8195, and module
for the ChromeOS Keyboard LED backlight which is present on various
Google Chromebooks.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZXhEZCgcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4QEMBAOOy
JjG3vWJmlLjYhaaCZEKK/OvsH2QK+Kf8W9Y9El8CAQDsBq6h5ON9YVolvnNQgxMh
O5e5RO8apsPjpigPZQ6eCA==
=E+UN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Kl/r
-----END PGP SIGNATURE-----
Merge tag 'mtk-defconfig-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/defconfig
MediaTek ARM64 defconfig updates for v6.8
Those defconfig changes enable booting the MT8173 Chromebooks with the
enablement of the DA9211 regulator driver and adds modules for sound,
AudioDSP, DisplayPort and LVTS Thermal for MT8192/MT8195, and module
for the ChromeOS Keyboard LED backlight which is present on various
Google Chromebooks.
* tag 'mtk-defconfig-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: defconfig: Enable configs for MT8195-Cherry-Tomato Chromebook
arm64: defconfig: Enable DA9211 regulator
Link: https://lore.kernel.org/r/20231212114515.121695-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable GCC, Pinctrl and Interconnect configs for Qualcomm's X1E80100 SoC
which is required to boot X1E80100 QCP/CRD boards to a console shell. The
configs are required to be marked as builtin and not modules due to the
console driver dependencies.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-6-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Qualcomm WSA884x driver, used speakers on boards with
Qualcomm SM8550 like QRD8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106073048.24553-1-krzysztof.kozlowski@linaro.org
[bjorn: Rebased on Johan's patch adding SC8280XP and WSA883x, rewrote commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Qualcomm QSEECOM interface driver and the UEFI Secure
Application client driver which are needed to access EFI variables on
machines like the Lenovo ThinkPad X13s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Qualcomm sc8280xp machine driver and the wsa833x speaker
codec driver that are needed for sound on machines like the Lenovo
ThinkPad X13s.
Note that the wcd938x headphone codec driver is currently implicitly
enabled as it is selected by the sc7280 machine driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable global clock controller and pinctrl for support the Qualcomm
SM4450 platform to boot to UART console.
The serial engine depends on some global clock controller and pinctrl, but
as the serial console driver is only available as built-in, so the global
clock controller and pinctrl also needs be built-in for the UART device to
probe and register the console.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-7-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable missing configs needed to boot the MT8195-Cherry-Tomato
Chromebook with full support on the defconfig.
The configs enabled bring in support for the DSP and sound card,
display, thermal sensor and keyboard backlight.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231122181335.535498-1-nfraprado@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Mediatek mt8173 board fails to boot with DA9211 regulator disabled.
Enabling CONFIG_REGULATOR_DA9211=y in drm-ci fixes the issue.
So enable it in the defconfig since kernel-ci also requires it.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230911104139.617448-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Enable Clocks, Pinctrl and Interconnect drivers in the ARM64
defconfig for the Qualcomm SM8650 SoC to boot the SM8650 MTP
(Mobile Test Platform) and QRD (Qualcomm Reference Device) boards.
TCSRCC, GCC, Interconnect, and Pinctrl config are marked as builtin and
not modules due to boot dependencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231121-topic-sm8650-upstream-defconfig-v1-1-2500565fc21b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable Global Clock controller, pinctrl and interconnect framework
support for Qualcomm's SDX75 SoC which is required to boot to
console on sdx75-idp platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117055849.534671-1-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
AM62 and other K3 based SoCs use Cadence DPHY and CSI-RX bridge
drivers, along with a DMA wrapper CSI IP for the camera pipeline.
Enable the same to get camera functionality on AM62x-SK, BeaglePlay and
AM62Ax SK among other platforms.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231201-csi_dts-v3-1-9f06f31080fe@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Increase CONFIG_SERIAL_8250_NR_UARTS from 4 to 8, the current legacy value
is not adequate for embedded systems that use SoCs where it's common to
have a large number of serial ports.
No need to change CONFIG_SERIAL_8250_RUNTIME_UARTS, see commit 9d86719f8769
("serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS").
The need to increase this value was noticed while working with Toradex
Verdin AM62, this board has 4 serial UART instances available to the user
plus an internal one that is connected to a Bluetooth module. Without this
change the fifth UART connected to the BT module is not instantiated and BT
is not working.
Instead of increasing the number to the bare minimum (5) that would be
required to solve this specific issue, we increase this to 8 which seems a
more reasonable number to have in the defconfig and should cover more valid
use cases.
With this change the kernel image size increases by ~3.2kB. bloat-o-meter
summary: add/remove: 1/1 grow/shrink: 7/0 up/down: 3220/-8 (3212)
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20231201195732.4931-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
K3 SoCs such as AM654x, AM64x. This subsystem is provided for the use
cases like implementation of custom peripheral interfaces, offloading of
tasks from the other processor cores of the SoC, etc.
Currently AM654x-EVM uses ICSSG driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20231128084537.3946895-1-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable the config for the Renesas VersaClock 3 programmable clock
generator, as it is populated on RZ/{G2L,G2LC} and RZ/V2L SMARC EVKs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230824083006.88944-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver
-----BEGIN PGP SIGNATURE-----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=l79u
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
