Copying from a 144 byte structure arm_smccc_1_2_regs at an offset of 32
into an 112 byte struct ffa_send_direct_data2 causes a compile-time warning:
| In file included from drivers/firmware/arm_ffa/driver.c:25:
| In function 'fortify_memcpy_chk',
| inlined from 'ffa_msg_send_direct_req2' at drivers/firmware/arm_ffa/driver.c:504:3:
| include/linux/fortify-string.h:580:4: warning: call to '__read_overflow2_field'
| declared with 'warning' attribute: detected read beyond size of field
| (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
| __read_overflow2_field(q_size_field, size);
Fix it by not passing a plain buffer to memcpy() to avoid the overflow
warning.
Fixes: aaef3bc981 ("firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-Id: <20241014004724.991353-1-gshan@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Copying to a 16 byte structure into an 8-byte struct member
causes a compile-time warning:
| In file included from drivers/firmware/arm_ffa/driver.c:25:
| In function 'fortify_memcpy_chk',
| inlined from 'export_uuid' at include/linux/uuid.h:88:2,
| inlined from 'ffa_msg_send_direct_req2' at drivers/firmware/arm_ffa/driver.c:488:2:
| include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field'
| declared with attribute warning: detected write beyond size of field
| (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
| __write_overflow_field(p_size_field, size);
Use a union for the conversion instead and make sure the byte order
is fixed in the process.
Fixes: aaef3bc981 ("firmware: arm_ffa: Add support for FFA_MSG_SEND_DIRECT_{REQ,RESP}2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-Id: <20240909110938.247976-1-arnd@kernel.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
An endpoint can discover the minimum size, maximum size and alignment
boundary for the Rx/Tx buffers by passing the function ID of the
FFA_RXTX_MAP ABI as input in the FFA_FEATURES interface. The maximum
size is an optional field and a value of 0 means that the partition
manager or the hypervisor does not enforce a maximum size.
Use the discovery mechanism and remove the hardcoded 4kB buffer size.
If the discovery fails, it still defaults to 4kB.
Message-Id: <20240820-ffa_v1-2-v2-7-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Successful completion of both direct messaging function can be indicated
through an invocation of FFA_YIELD or GGA_INTERRUPT by the callee.
FFA_INTERRUPT indicates that the direct request was interrupted and must
be resumed through the FFA_RUN interface which is already done in the
driver.
FFA_YIELD indicates that the receiver endpoint has transitioned to the
blocked runtime state and must be resumed through the FFA_RUN interface.
However, the way receiver endpoint gets unblocked is implementation
defined. So, the driver just sleeps for 1 - 2ms and issues FFA_RUN. It
can return to the caller with FFA_YIELD is the receiver endpoint is still
blocked.
Message-Id: <20240820-ffa_v1-2-v2-6-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FFA_MSG_SEND_DIRECT_{REQ,RESP} supported only x3-x7 to pass implementation
defined values as part of the message. This may not be sufficient sometimes
and also it would be good to use all the registers supported by SMCCC v1.2
(x0-x17) for such register based communication.
Also another limitation with the FFA_MSG_SEND_DIRECT_{REQ,RESP} is the
ability to target a specific service within the partition based on it's
UUID.
In order to address both of the above limitation, FF-A v1.2 introduced
FFA_MSG_SEND_DIRECT_{REQ,RESP}2 which has the ability to target the
message to a specific service based on its UUID within a partition as
well as utilise all the available registers(x4-x17 specifically) for
the communication.
This change adds support for FFA_MSG_SEND_DIRECT_REQ2 and
FFA_MSG_SEND_DIRECT_RESP2.
Message-Id: <20240820-ffa_v1-2-v2-5-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FF-A v1.2 introduced FFA_PARTITION_INFO_GET_REGS which is similar to
FFA_PARTITION_INFO_GET except that the former uses the registers to
get the required information instead of the Rx buffer which the latter
uses.
We need to first check if the platform supports this new API using
FFA_FEATURES so that we can fallback to the FFA_PARTITION_INFO_GET
(which is mandatory) if FFA_PARTITION_INFO_GET_REGS is not implemented.
Message-Id: <20240820-ffa_v1-2-v2-4-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We need to use ffa_features() in ffa_partition_probe() to detect if
the newer FFA_PARTITION_INFO_GET_REGS API is supported in the platform
or not. To avoid unnecessary forward declaration within the file, let
us just move this ffa_features() earlier.
No funtional change.
Message-Id: <20240820-ffa_v1-2-v2-3-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Arm Firmware Framework for A-profile(FFA) v1.2 introduces register based
discovery mechanism and direct messaging extensions that enables to target
specific UUID within a partition.
Let us add all the newly supported FF-A function IDs in the spec.
Also update to the error values and associated handling.
Message-Id: <20240820-ffa_v1-2-v2-2-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
These changes fixes a set of below coding style issues:
1. spaces required around that '=' (ctx:VxW)
2. possible unnecessary 'out of memory' message
3. unnecessary for single statement blocks
Message-Id: <20240820-ffa_v1-2-v2-1-18c0c5f3c65e@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the FF-A bus on its own as a distinct module initialized at
subsys_initcall level when builtin.
Keep the FF-A driver core stack, together with any configured transport,
in a different module initialized as module_init level.
FF-A drivers initialization is now changed to module_init level.
Acked-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240515094028.1947976-2-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently FF-A bus ffa_device_match() handles the workaround for the
FF-A v1.0 devices which are not populated with UUID to match. The FF-A
bus layer calls into FF-A driver and populates the device UUID if it
matches with the driver attempting to match.
But this forces to have both FF-A bus and core driver to be bundled into
a single module. However, keep it as a single module adds problems for
the FF-A driver registrations and their initcall levels.
In preparation to split the FF-A bus and the core driver into distinct
modules, we need to move the workaround away from the FF-A bus layer.
We can add it into the FF-A core driver as a bus notifier.
In order to do so, we need to always match any driver with the device if
the UUID is NULL and then during the driver binding phase, we can populate
the UUID if it matches with the driver UUID table using the bus notifiers.
We also need to add a check for NULL UUID before calling the device/driver
probe as devices with NULL UUID is possible since we match all for that
case.
Acked-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240515094028.1947976-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
Currently notif_pcpu_irq_work_fn() may get queued from the work that is
already running on the 'notif_pcpu_wq' workqueue. This may add
unnecessary delays and could be avoided if the work is called directly
instead.
This change removes queuing of the work when already running on the
'notif_pcpu_wq' workqueue thereby removing any possible delays in that
path.
Link: https://lore.kernel.org/r/20240424131640.706870-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The "msg" pointer is a struct and msg->offset is the sizeof(*msg). The
pointer here math means the memcpy() will write outside the bounds.
Cast "msg" to a u8 pointer to fix this.
Fixes: 02c19d84c7 ("firmware: arm_ffa: Add support for FFA_MSG_SEND2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cd5fb6b5-81fa-4a6d-b2b8-284ca704bbff@moroto.mountain
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The FFA_MSG_SEND2 can be used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint.
An invocation of the FFA_MSG_SEND2 transfers the ownership of the Tx
buffer to the receiver endpoint(or any intermediate consumer). Completion
of an FFA_MSG_SEND2 invocation transfers the ownership of the buffer
back to the sender endpoint.
The framework defines the FFA_MSG_SEND2 interface to transmit a partition
message from the Tx buffer of the sender to the Rx buffer of a receiver
and inform the scheduler that the receiver must be run.
Link: https://lore.kernel.org/r/20240417090931.2866487-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The properies obtained from the partition information descriptor as
part of initial partitions discovery is useful as it contain info
if the partition
- Runs in AArch64 or AArch32 execution state
- Can send and/or receive direct requests
- Can send and receive indirect message
- Does support receipt of notifications.
These can be used for querying before attempting to do any of the
above operations.
Link: https://lore.kernel.org/r/20240417090921.2866447-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
If the firmware returns incorrect SRI/NRI number, we fail to set it up
in the kernel which is absolutely fine.
However, we don't reset the stashed value of sched_recv or notif_pend
IRQs. When we call ffa_notifications_cleanup() in case of failures to
setup the notifications, we end up calling free_percpu_irq() from
ffa_uninit_pcpu_irq() which results in the following warning:
| genirq: Flags mismatch irq 6. 00004401 (ARM-FFA-NPI) vs. 00004400 (IPI)
| ARM FF-A: Error registering percpu NPI nIRQ 6 : -16
| ARM FF-A: Notification setup failed -16, not enabled
| ------------[ cut here ]------------
| Trying to free already-free IRQ 6
| WARNING: CPU: 2 PID: 1 at kernel/irq/manage.c:2476 __free_percpu_irq+0x6c/0x138
| Modules linked in:
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc3 #211
| Hardware name: FVP Base RevC (DT)
| pstate: 614000c9 (nZCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : __free_percpu_irq+0x6c/0x138
| lr : __free_percpu_irq+0x6c/0x138
| Call trace:
| __free_percpu_irq+0x6c/0x138
| free_percpu_irq+0x48/0x84
| ffa_notifications_cleanup+0x78/0x164
| ffa_notifications_setup+0x368/0x3c0
| ffa_init+0x2b4/0x36c
| do_one_initcall+0xe0/0x258
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x108/0x174
| kernel_init+0x20/0x1a4
| ret_from_fork+0x10/0x20
Fix the same by resetting the stashed copy of IRQ values to 0 in case
of any failure to set them up properly.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240418102932.3093576-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The FF-A uses the notification pending interrupt to inform the receiver
that it has a pending notification. This is a virtual interrupt and is
used by the following type of receivers:
1. A guest/VM running under a hypervisor.
2. An S-EL1 SP running under a S-EL2 SPMC.
The rules that govern the properties of the NPI are the same as the
rules for the SRI with couple of exceptions. Both SRI and NPI can be
supported simultaneously.
The handling of NPI is also same as the handling of notification for the
self/primary VM with ID 0 except the absence of global notification.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-3-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In preparation to support handling of Notification Pending Interrupt(NPI)
in addition to the existing support for Schedule Receiver Interrupt(SRI),
refactor the code around SRI handling so that NPI support can reuse some
of it. This change shouldn't have any functionality impact. It neither
adds the support for NPIs nor changes any SRI support.
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-2-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When the FF-A driver is running inside a guest VM under an hypervisor,
the driver/guest VM doesn't have the permission/capability to request
the creation of notification bitmaps. For a VM, the hypervisor reserves
memory for its VM and hypervisor framework notification bitmaps and the
SPMC reserves memory for its SP and SPMC framework notification bitmaps
before the hypervisor initializes it.
The hypervisor does not initialize a VM if memory cannot be reserved
for all its notification bitmaps. So the creation of all the necessary
bitmaps are already done when the driver initialises and hence it can be
skipped. We rely on FFA_FEATURES(FFA_NOTIFICATION_BITMAP_CREATE) to fail
when running in the guest to handle this in the driver.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240411-ffa_npi_support-v2-1-927a670254e6@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FFA_NOTIFICATION_INFO_GET retrieves information about pending
notifications. Notifications can be either global or per VCPU. Global
notifications are reported with the partition ID only in the list of
endpoints with pending notifications. ffa_notification_info_get()
incorrectly expect no ID at all for global notifications. Fix this by
checking for ID = 1 instead of ID = 0.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240311110700.2367142-1-jens.wiklander@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code.
- Feature updates for Tegra and Qualcomm platforms for added
hardware support.
- A number of platforms get soc_device additions for identifying newly
added chips from Renesas, Qualcomm, Mediatek and Google.
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXvgbsACgkQYKtH/8kJ
UieH8Q/+LRzESrScIwFq0/V7lE1AadmhwMwcEf1Fsq8aMrelvPm/SWvHgIWIHTvV
IZ/g3XS/CnBxr1JG3nbyMMe/2otEY7JxsUOOqixIuZ2gdzJvzZOBHMi54xDwbFRx
4NbP0CRTy8K35XNnOkJO3TnwBFP+q2Fu6qHY90as8M2GIxQpWb8OONJHh8N2qPq+
Hi3H0jjKXMInnOKpNIEQI60N4F2djGMHWkDySwFtHu40RaJjCIfmVd3PWQGz7RHl
WQHjZ6CB+/BDgqfG0ccQ7Cikc4BLorZsjKCn8bsaLtdp4HvRCTp2ZpuFFTRq6vay
IxqJCXrgpKjM1k9plehObEhMv4lNMbD1djG8Y6hqC+PPKbDfOLvlcat3xUK2AGgb
ROJtKDQMXfAeSnLpw9n4Ox+BZRmwMIOcTU/20N72hlcZKY1jq/KuSqQn+LPVKIrW
pJIhWd1B8R+2O1TewuIe3fjvfQwgATMBHBUVNRkSrzqkpcZNGQ3M5koMpClVvY6T
Z/+hdAg58EQw0K6ukJLyrevxs1pHHhYXLCECIoU/xPs4NX4hDk7rKTFv6fdLS4Y2
24qzjhIGYdhRXmhRQdVq+06cr3cvtm1z7Fqna3tW1+J6wtBnHO/xZ63M9n5saPcm
NgKMAN7YLLMYuUNrd39W7U2wLGQCgknjhrbH8ZmxPypk467v08k=
=bV/K
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This is the usual mix of updates for drivers that are used on (mostly
ARM) SoCs with no other top-level subsystem tree, including:
- The SCMI firmware subsystem gains support for version 3.2 of the
specification and updates to the notification code
- Feature updates for Tegra and Qualcomm platforms for added hardware
support
- A number of platforms get soc_device additions for identifying
newly added chips from Renesas, Qualcomm, Mediatek and Google
- Trivial improvements for firmware and memory drivers amongst
others, in particular 'const' annotations throughout multiple
subsystems"
* tag 'soc-drivers-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
tee: make tee_bus_type const
soc: qcom: aoss: add missing kerneldoc for qmp members
soc: qcom: geni-se: drop unused kerneldoc struct geni_wrapper param
soc: qcom: spm: fix building with CONFIG_REGULATOR=n
bus: ti-sysc: constify the struct device_type usage
memory: stm32-fmc2-ebi: keep power domain on
memory: stm32-fmc2-ebi: add MP25 RIF support
memory: stm32-fmc2-ebi: add MP25 support
memory: stm32-fmc2-ebi: check regmap_read return value
dt-bindings: memory-controller: st,stm32: add MP25 support
dt-bindings: bus: imx-weim: convert to YAML
watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs
soc: samsung: exynos-pmu: Add regmap support for SoCs that protect PMU regs
MAINTAINERS: Update SCMI entry with HWMON driver
MAINTAINERS: samsung: gs101: match patches touching Google Tensor SoC
memory: tegra: Fix indentation
memory: tegra: Add BPMP and ICC info for DLA clients
memory: tegra: Correct DLA client names
dt-bindings: memory: renesas,rpc-if: Document R-Car V4M support
firmware: arm_scmi: Update the supported clock protocol version
...
Now that the driver core can properly handle constant struct bus_type,
move the ffa_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240211-bus_cleanup-firmware2-v1-1-1851c92c7be7@marliere.net
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Make ffa_setup_partitions() fail, cleanup and return an error when the Host
partition setup fails: in such a case ffa_init() itself will fail.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-6-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
While adding new partitions descriptors to the XArray the outcome of the
stores should be checked and, in particular, it has also to be ensured
that an existing entry with the same index was not already present, since
partitions IDs are expected to be unique.
Use xa_insert() instead of xa_store() since it returns -EBUSY when the
index is already in use and log an error when that happens.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-5-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
On cleanup iterate the XArrays with xa_for_each() and remove the existent
entries with xa_erase(), finally destroy the XArray itself.
Remove partition_count field from drv_info since no more used anywhwere.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-4-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add a check to verify the result of xa_load() during the partition
lookups done while registering/unregistering the scheduler receiver
interrupt callbacks and while executing the main scheduler receiver
interrupt callback handler.
Fixes: 0184450b8b ("firmware: arm_ffa: Add schedule receiver callback mechanism")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-3-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add the missing rwlock initialization for the FF-A partition associated
the driver in ffa_setup_partitions(). It will the primary scheduler
partition in the host or the VM partition in the virtualised environment.
IOW, it corresponds to the partition with VM ID == drv_info->vm_id.
Fixes: 1b6bf41b7a ("firmware: arm_ffa: Add notification handling mechanism")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240108-ffa_fixes_6-8-v1-2-75bf7035bc50@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
To parse the retrieved ID lists appropriately in
ffa_notification_info_get() the ids_processed variable should not
be pre-incremented - we are dropping an identifier at the
beginning of the list.
Fix it by using the post-increment operator to increment the number
of processed IDs.
Fixes: 3522be48d8 ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20231108111549.155974-1-lpieralisi@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Arry of pointer to struct ffa_dev_part_info needs to be allocated to
fetch the pointers stored in XArray. However, currently we allocate the
entire structure instead of just pointers.
Fix the allocation size. This will also eliminate the below Smatch
istatic checker warning:
| drivers/firmware/arm_ffa/driver.c:1251 ffa_partitions_cleanup()
| warn: double check that we're allocating correct size: 8 vs 88
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/0e8ddbca-d9da-4a3b-aae3-328993b62ba2@moroto.mountain
Link: https://lore.kernel.org/r/20231031141335.3077026-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We allow the FF-A to be initialised successfully even when notification
fails. When the notification fails, ffa_notifications_cleanup() gets
called on the failure path.
However, the driver information about the notifications like the irq,
workqueues and cpu hotplug state for enabling and disabling percpu IRQ
are not cleared. This may result in unexpected behaviour during CPU
hotplug because of percpu IRQ being enabled and disabled or during the
driver removal when ffa_notifications_cleanup() gets executed again.
Fix the FFA notifications cleanup path by clearing all the notification
related driver information.
Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-4-d552c0ec260d@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
We need to check if the FF-A notifications are enabled or not in all
the notification operations that are accessible for the FF-A device
from the FF-A driver. This helps to avoid making calls to the FF-A
firmware even if the notification setup has failed.
Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-3-d552c0ec260d@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently the notifications are setup of the partitions are probed and
FF-A devices are added on the FF-A bus. The FF-A driver probe can be
called even before the FF-A notification setup happens which is wrong
and may result in failure or misbehaviour in the FF-A partition device
probe.
In order to ensure the FF-A notifications are setup before the FF-A
devices are probed, let us move the FF-A partition setup after the
completion of FF-A notification setup.
Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-2-d552c0ec260d@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FF-A notifications are optional feature in the specification. Currently
we allow to continue if the firmware reports no support for the
notifications. However, we fail to continue and complete the FF-A
driver initialisation if the notification setup fails for any reason.
Let us allow the FF-A driver to complete the initialisation even if the
notification fails to setup. We will just flag the error and continue
to provide other features in the driver.
Link: https://lore.kernel.org/r/20231024-ffa-notification-fixes-v1-1-d552c0ec260d@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Update memory transaction descriptor structure to accommodate couple of
new entries in v1.1 which were previously marked reserved and MBZ(must
be zero).
It also removes the flexible array member ep_mem_access in the memory
transaction descriptor structure as it need not be at fixed offset.
Also update ffa_mem_desc_offset() accessor to handle both old and new
formats of memory transaction descriptors.
The updated ffa_mem_region structure aligns with new format in v1.1 and
hence the driver/user must take care not to use members beyond and
including ep_mem_offset when using the old format.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-16-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
In preparation to add support to the new memory transaction descriptor,
the ep_mem_access member needs to be removed and hence even the macro
COMPOSITE_OFFSET(). Let us switch to using the new ffa_mem_desc_offset()
accessor in ffa_setup_and_transmit().
This will enable adding the support for new format transparently without
any changes here again.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-15-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The computation of endpoint memory access descriptor's composite memory
region descriptor offset is using COMPOSITE_CONSTITUENTS_OFFSET which is
unnecessary complicated. Composite memory region descriptor always follow
the endpoint memory access descriptor array and hence it is computed
accordingly. COMPOSITE_CONSTITUENTS_OFFSET is useless and wrong for any
input other than endpoint memory access descriptor count.
Let us drop the usage of COMPOSITE_CONSTITUENTS_OFFSET to simplify the
computation of total transmit and fragment length in the memory
transactions.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-13-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With all the necessary plumbing in place, let us add handling the
notifications as part of schedule receiver interrupt handler. In order
to do so, we need to just register scheduling callback on behalf of the
driver partition.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-12-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The framework provides an interface to the sender endpoint to specify
the notification to signal to the receiver endpoint. A sender signals
a notification by requesting its partition manager to set the
corresponding bit in the notifications bitmap of the receiver.
Expose the ability to send a notification to another partition.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-11-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Enable client drivers to register a callback function that will be
called when one or more notifications are pending for a target
partition as part of schedule receiver interrupt handling.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-9-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Framework uses the schedule receiver interrupt to inform the
receiver’s scheduler that the receiver must be run to handle a pending
notification. A receiver’s scheduler can obtain the description of the
schedule receiver interrupt by invoking the FFA_FEATURES interface.
The delivery of the physical schedule receiver interrupt from the secure
state to the non-secure state depends upon the state of the interrupt
controller as configured by the hypervisor.
The schedule seceiver interrupt is assumed to be a SGI. The Arm GIC
specification defines 16 SGIs. It recommends that they are equally
divided between the non-secure and secure states. OS like Linux kernel
in the non-secure state typically do not have SGIs to spare. The usage
of SGIs in the secure state is however limited. It is more likely that
software in the Secure world does not use all the SGIs allocated to it.
It is recommended that the secure world software donates an unused SGI
to the normal world for use as the schedule receiver interrupt. This
implies that secure world software must configure the SGI in the GIC
as a non-secure interrupt before presenting it to the normal world.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-8-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The receiver’s scheduler uses the FFA_NOTIFICATION_INFO_GET interface
to retrieve the list of endpoints that have pending notifications and
must be run. A notification could be signaled by a sender in the secure
world to a VM. The Hypervisor needs to determine which VM and vCPU
(in case a per-vCPU notification is signaled) has a pending notification
in this scenario. It must obtain this information through an invocation
of the FFA_NOTIFICATION_INFO_GET.
Add the implementation of the NOTIFICATION_INFO_GET interface
and prepare to use this to handle the schedule receiver interrupt.
Implementation of handling notifications will be added later.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-7-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The framework provides an interface to the receiver to determine the
identity of the notification. A receiver endpoint must use the
FFA_NOTIFICATION_GET interface to retrieve its pending notifications
and handle them.
Add the support for FFA_NOTIFICATION_GET to allow the caller(receiver)
to fetch its pending notifications from other partitions in the system.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-6-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The framework provides an interface to the sender to specify the
notification to signal to the receiver. A sender signals a notification
by requesting its partition manager to set the corresponding bit in the
notifications bitmap of the receiver invoking FFA_NOTIFICATION_SET.
Implement the FFA_NOTIFICATION_SET to enable the caller(sender) to send
the notifications for any other partitions in the system.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-5-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
FFA_RUN is used by a scheduler to allocate CPU cycles to a target
endpoint execution context specified in the target information parameter.
If the endpoint execution context is in the waiting/blocked state, it
transitions to the running state.
Expose the ability to call FFA_RUN in order to give any partition in the
system cpu cycles to perform IMPDEF functionality.
Link: https://lore.kernel.org/r/20231005-ffa_v1-1_notif-v4-4-cddd3237809c@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
