When using buffers from DRM, DMA-API gives a warning about: "mapping sg
segment longer than device claims to support [len=307200] [max=65536]"
Add a call to vb2_dma_contig_set_max_seg_size() to tell the DMA-API
about the supported segment size (which is UINT_MAX).
Fixes: 6edb685abb ("media: raspberrypi: Add support for RP1-CFE")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If devm_clk_get() fails then we need to free "cfe" before returning.
Fixes: 6edb685abb ("media: raspberrypi: Add support for RP1-CFE")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
platform_get_irq() already provides a error message.
This fixes the following cocci error:
drivers/media/platform/raspberrypi/rp1-cfe/cfe.c:2326:2-9: line 2326 is redundant because platform_get_irq() already prints an error
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
There is a spelling mistake in a WARN message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # for meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Add support for Raspberry Pi CFE. The CFE is a hardware block that
contains:
- MIPI D-PHY
- MIPI CSI-2 receiver
- Front End ISP (FE)
The driver has been upported from the Raspberry Pi kernel commit
88a681df9623 ("ARM: dts: bcm2712-rpi: Add i2c<n>_pins labels").
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/media to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Without these ops the v4l2-compliance blocking wait test will fail.
These ops are required to ensure that when VIDIOC_DQBUF has to
wait for buffers to arrive, the queue lock is correctly released
and retaken. Otherwise the wait for a buffer would block all other
queue ioctls.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the Raspberry Pi PiSP Backend (BE) ISP is only present on the
Broadcom BCM2712-based Raspberry Pi 5. Hence add a dependency on
ARCH_BCM2835, to prevent asking the user about this driver when
configuring a kernel without Broadcom BCM2835 family support. The
dependency can be relaxed if/when the encoder appears on other SoC
families.
Fixes: 12187bd5d4 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: FLorian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The remove callback's return value is about to change from int to void,
this is done by commit 0edb555a65 ("platform: Make
platform_driver::remove() return void"). Prepare for merging the patch by
switching the PiSP driver from remove to remove_new callback.
Fixes: 12187bd5d4 ("media: raspberrypi: Add support for PiSP BE")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for the Raspberry Pi PiSP Back End.
The driver has been upported from the Raspberry Pi kernel at revision
f74893f8a0c2 ("drivers: media: pisp_be: Update seqeuence numbers of the
buffers").
The ISP documentation is available at:
https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.org>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: drop dev_err after platform_get_irq to fix a coccinelle check]
