This helper gets the directory entry set of the file for the exfat
inode which has been created.
It's used to remove all the instances of the pattern it replaces
making the code cleaner, it's also a preparation for changing ->dir
to record the cluster where the directory entry set is located and
changing ->entry to record the index of the directory entry within
the cluster.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In this exfat implementation, the relationship between inode and ei
is ei=EXFAT_I(inode). However, in the arguments of exfat_move_file()
and exfat_rename_file(), argument 'inode' indicates the parent
directory, but argument 'ei' indicates the target file to be renamed.
They do not have the above relationship, which is not friendly to code
readers.
So this commit renames 'inode' to 'parent_inode', making the argument
name match its role.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
To determine whether it is a directory, there is no need to read its
directory entry, just use S_ISDIR(inode->i_mode).
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Unaligned direct writes are invalid and should return an error
without making any changes, rather than extending ->valid_size
and then returning an error. Therefore, alignment checking is
required before extending ->valid_size.
Fixes: 11a347fb6c ("exfat: change to get file size from DataLength")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
There is no check if stream size and start_clu are invalid.
If start_clu is EOF cluster and stream size is 4096, It will
cause uninit value access. because ei->hint_femp.eidx could
be 128(if cluster size is 4K) and wrong hint will allocate
next cluster. and this cluster will be same with the cluster
that is allocated by exfat_extend_valid_size(). The previous
patch will check invalid start_clu, but for clarity, initialize
hint_femp.eidx to zero.
Cc: stable@vger.kernel.org
Reported-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Tested-by: syzbot+01218003be74b5e1213a@syzkaller.appspotmail.com
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In the case of the directory size is greater than or equal to
the cluster size, if start_clu becomes an EOF cluster(an invalid
cluster) due to file system corruption, then the directory entry
where ei->hint_femp.eidx hint is outside the directory, resulting
in an out-of-bounds access, which may cause further file system
corruption.
This commit adds a check for start_clu, if it is an invalid cluster,
the file or directory will be treated as empty.
Cc: stable@vger.kernel.org
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Co-developed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Sergey Senozhatsky improves zram's post-processing selection algorithm.
This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of shadow
entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in the
hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page into
small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio size
rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel Butt
removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations" from
Mike Rapoport teaches x86 to use large pages for read-only-execute
module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in tests
over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a single
VMA, rather than requiring that multiple VMAs be created for this.
Improved efficiencies for userspace memory allocators are expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP from
the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep is
enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzwFqgAKCRDdBJ7gKXxA
jkeuAQCkl+BmeYHE6uG0hi3pRxkupseR6DEOAYIiTv0/l8/GggD/Z3jmEeqnZaNq
xyyenpibWgUoShU2wZ/Ha8FE5WDINwg=
=JfWR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
Piergiorgio reported a bug in bugzilla as below:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 969 at fs/f2fs/segment.c:1330
RIP: 0010:__submit_discard_cmd+0x27d/0x400 [f2fs]
Call Trace:
__issue_discard_cmd+0x1ca/0x350 [f2fs]
issue_discard_thread+0x191/0x480 [f2fs]
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
w/ below testcase, it can reproduce this bug quickly:
- pvcreate /dev/vdb
- vgcreate myvg1 /dev/vdb
- lvcreate -L 1024m -n mylv1 myvg1
- mount /dev/myvg1/mylv1 /mnt/f2fs
- dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=20
- sync
- rm /mnt/f2fs/file
- sync
- lvcreate -L 1024m -s -n mylv1-snapshot /dev/myvg1/mylv1
- umount /mnt/f2fs
The root cause is: it will update discard_max_bytes of mounted lvm
device to zero after creating snapshot on this lvm device, then,
__submit_discard_cmd() will pass parameter @nr_sects w/ zero value
to __blkdev_issue_discard(), it returns a NULL bio pointer, result
in panic.
This patch changes as below for fixing:
1. Let's drop all remained discards in f2fs_unfreeze() if snapshot
of lvm device is created.
2. Checking discard_max_bytes before submitting discard during
__submit_discard_cmd().
Cc: stable@vger.kernel.org
Fixes: 35ec7d5748 ("f2fs: split discard command in prior to block layer")
Reported-by: Piergiorgio Sartor <piergiorgio.sartor@nexgo.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219484
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Quoted:
"at this time, there are still 1086911 extent nodes in this zombie
extent tree that need to be cleaned up.
crash_arm64_sprd_v8.0.3++> extent_tree.node_cnt ffffff80896cc500
node_cnt = {
counter = 1086911
},
"
As reported by Xiuhong, there will be a huge number of extent nodes
in extent tree, it may potentially cause:
- slab memory fragments
- extreme long time shrink on extent tree
- low mapping efficiency
Let's add a sysfs node to limit max read extent count for each inode,
by default, value of this threshold is 10240, it can be updated
according to user's requirement.
Reported-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/20241112110627.1314632-1-xiuhong.wang@unisoc.com/
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----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=K4Ai
-----END PGP SIGNATURE-----
Merge tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Fix two SMB3.1.1 POSIX Extensions problems
- Fixes for special file handling (symlinks and FIFOs)
- Improve compounding
- Four cleanup patches
- Fix use after free in signing
- Add support for handling namespaces for reconnect related upcalls
(e.g. for DNS names resolution and auth)
- Fix various directory lease problems (directory entry caching),
including some important potential use after frees
* tag '6.13-rc-part1-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: prevent use-after-free due to open_cached_dir error paths
smb: Don't leak cfid when reconnect races with open_cached_dir
smb: client: handle max length for SMB symlinks
smb: client: get rid of bounds check in SMB2_ioctl_init()
smb: client: improve compound padding in encryption
smb3: request handle caching when caching directories
cifs: Recognize SFU char/block devices created by Windows NFS server on Windows Server <<2012
CIFS: New mount option for cifs.upcall namespace resolution
smb/client: Prevent error pointer dereference
fs/smb/client: implement chmod() for SMB3 POSIX Extensions
smb: cached directories can be more than root file handle
smb: client: fix use-after-free of signing key
smb: client: Use str_yes_no() helper function
smb: client: memcpy() with surrounding object base address
cifs: Remove pre-historic unused CIFSSMBCopy
-----BEGIN PGP SIGNATURE-----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=pgoX
-----END PGP SIGNATURE-----
Merge tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs updates from Amir Goldstein:
- Fix a syzbot reported NULL pointer deref with bfs lower layers
- Fix a copy up failure of large file from lower fuse fs
- Followup cleanup of backing_file API from Miklos
- Introduction and use of revert/override_creds_light() helpers, that
were suggested by Christian as a mitigation to cache line bouncing
and false sharing of fields in overlayfs creator_cred long lived
struct cred copy.
- Store up to two backing file references (upper and lower) in an
ovl_file container instead of storing a single backing file in
file->private_data.
This is used to avoid the practice of opening a short lived backing
file for the duration of some file operations and to avoid the
specialized use of FDPUT_FPUT in such occasions, that was getting in
the way of Al's fd_file() conversions.
* tag 'ovl-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: Filter invalid inodes with missing lookup function
ovl: convert ovl_real_fdget() callers to ovl_real_file()
ovl: convert ovl_real_fdget_path() callers to ovl_real_file_path()
ovl: store upper real file in ovl_file struct
ovl: allocate a container struct ovl_file for ovl private context
ovl: do not open non-data lower file for fsync
ovl: Optimize override/revert creds
ovl: pass an explicit reference of creators creds to callers
ovl: use wrapper ovl_revert_creds()
fs/backing-file: Convert to revert/override_creds_light()
cred: Add a light version of override/revert_creds()
backing-file: clean up the API
ovl: properly handle large files in ovl_security_fileattr
This update includes:
- A patch by Thomas Weißschuh constifying a read-only struct.
- A patch by André Almeida fixing the error path of unicode_load,
which might trigger a kernel oops if it fails to find the unicode
module.
- One documentation fix by Gan Jie, updating a filename in the README.
- A patch by André Almeida adding the link of my tree to MAINTAINERS.
All but the MAINTAINERS patch have been sitting on my tree and in
linux-next since early in the 6.12 cycle.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3XO7QfvpFoONBhH1OwQgI3t8RJgUCZ0D4JwAKCRBOwQgI3t8R
JmjZAP988O9eB4ITF6KHKsHyY3pOhxSRXU5jpr78v7ofDDuGwAD/UBJZyF35wgJz
S2q295kCAEP8bUKxj6RJtyMyQnamQg8=
=irw2
-----END PGP SIGNATURE-----
Merge tag 'unicode-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode updates from Gabriel Krisman Bertazi:
- constify a read-only struct (Thomas Weißschuh)
- fix the error path of unicode_load, avoiding a possible kernel oops
if it fails to find the unicode module (André Almeida)
- documentation fix, updating a filename in the README (Gan Jie)
- add the link of my tree to MAINTAINERS (André Almeida)
* tag 'unicode-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
MAINTAINERS: Add Unicode tree
unicode: change the reference of database file
unicode: Fix utf8_load() error path
unicode: constify utf8 data table
* sysctl ctl_table constification
Constifying ctl_table structs prevents the modification of proc_handler
function pointers. All ctl_table struct arguments are const qualified in the
sysctl API in such a way that the ctl_table arrays being defined elsewhere
and passed through sysctl can be constified one-by-one. We kick the
constification off by qualifying user_table in kernel/ucount.c and expect all
the ctl_tables to be constified in the coming releases.
* Misc fixes
Adjust comments in two places to better reflect the code. Remove superfluous
dput calls. Remove Luis from sysctl maintainership. Replace comments about
holding a lock with calls to lockdep_assert_held.
* Testing
All these went through 0-day and they have all been in linux-next for at
least 1 month (since Oct-24). I also rand these through the sysctl selftest
for x86_64.
-----BEGIN PGP SIGNATURE-----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=bOJ0
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
"sysctl ctl_table constification:
- Constifying ctl_table structs prevents the modification of
proc_handler function pointers. All ctl_table struct arguments are
const qualified in the sysctl API in such a way that the ctl_table
arrays being defined elsewhere and passed through sysctl can be
constified one-by-one.
We kick the constification off by qualifying user_table in
kernel/ucount.c and expect all the ctl_tables to be constified in
the coming releases.
Misc fixes:
- Adjust comments in two places to better reflect the code
- Remove superfluous dput calls
- Remove Luis from sysctl maintainership
- Replace comments about holding a lock with calls to
lockdep_assert_held"
* tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Reduce dput(child) calls in proc_sys_fill_cache()
sysctl: Reorganize kerneldoc parameter names
ucounts: constify sysctl table user_table
sysctl: update comments to new registration APIs
MAINTAINERS: remove me from sysctl
sysctl: Convert locking comments to lockdep assertions
const_structs.checkpatch: add ctl_table
sysctl: make internal ctl_tables const
sysctl: allow registration of const struct ctl_table
sysctl: move internal interfaces to const struct ctl_table
bpf: Constify ctl_table argument of filter function
- Constify range_contains() input parameters to prevent changes.
- Add support for displaying RCD capabilities in sysfs to support lspci for CXL device.
- Downgrade warning message to debug in cxl_probe_component_regs().
- Add support for adding a printf specifier '$pra' to emit 'struct range' content.
- Add sanity tests for 'struct resource'.
- Add documentation for special case.
- Add %pra for 'struct range'.
- Add %pra usage in CXL code.
- Add preparation code for DCD support
- Add range_overlaps().
- Add CDAT DSMAS table shared and read only flag in ACPICA.
- Add documentation to 'struct dev_dax_range'.
- Delay event buffer allocation in CXL PCI code until needed.
- Use guard() in cxl_dpa_set_mode().
- Refactor create region code to consolidate common code.
-----BEGIN PGP SIGNATURE-----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=GNlu
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dave Jiang:
- Constify range_contains() input parameters to prevent changes
- Add support for displaying RCD capabilities in sysfs to support lspci
for CXL device
- Downgrade warning message to debug in cxl_probe_component_regs()
- Add support for adding a printf specifier '%pra' to emit 'struct
range' content:
- Add sanity tests for 'struct resource'
- Add documentation for special case
- Add %pra for 'struct range'
- Add %pra usage in CXL code
- Add preparation code for DCD support:
- Add range_overlaps()
- Add CDAT DSMAS table shared and read only flag in ACPICA
- Add documentation to 'struct dev_dax_range'
- Delay event buffer allocation in CXL PCI code until needed
- Use guard() in cxl_dpa_set_mode()
- Refactor create region code to consolidate common code
* tag 'cxl-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Refactor common create region code
cxl/hdm: Use guard() in cxl_dpa_set_mode()
cxl/pci: Delay event buffer allocation
dax: Document struct dev_dax_range
ACPI/CDAT: Add CDAT/DSMAS shared and read only flag values
range: Add range_overlaps()
cxl/cdat: Use %pra for dpa range outputs
printf: Add print format (%pra) for struct range
Documentation/printf: struct resource add start == end special case
test printf: Add very basic struct resource tests
cxl: downgrade a warning message to debug level in cxl_probe_component_regs()
cxl/pci: Add sysfs attribute for CXL 1.1 device link status
cxl/core/regs: Add rcd_pcie_cap initialization
kernel/range: Const-ify range_contains parameters
If iov_iter_zero succeeds after failed copy_from_kernel_nofault,
we need to reset the ret value to zero otherwise it will be returned
as final return value of read_kcore_iter.
This fixes objdump -d dump over /proc/kcore for me.
Cc: stable@vger.kernel.org
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Fixes: 3d5854d75e ("fs/proc/kcore.c: allow translation of physical memory addresses")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121231118.3212000-1-jolsa@kernel.org
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
I recently had an fstests hang where there were two internal tasks
stuck like so:
[ 6559.010870] task:kworker/24:45 state:D stack:12152 pid:631308 tgid:631308 ppid:2 flags:0x00004000
[ 6559.016984] Workqueue: xfs-buf/dm-2 xfs_buf_ioend_work
[ 6559.020349] Call Trace:
[ 6559.022002] <TASK>
[ 6559.023426] __schedule+0x650/0xb10
[ 6559.025734] schedule+0x6d/0xf0
[ 6559.027835] schedule_timeout+0x31/0x180
[ 6559.030582] wait_for_common+0x10c/0x1e0
[ 6559.033495] wait_for_completion+0x1d/0x30
[ 6559.036463] __flush_workqueue+0xeb/0x490
[ 6559.039479] ? mempool_alloc_slab+0x15/0x20
[ 6559.042537] xlog_cil_force_seq+0xa1/0x2f0
[ 6559.045498] ? bio_alloc_bioset+0x1d8/0x510
[ 6559.048578] ? submit_bio_noacct+0x2f2/0x380
[ 6559.051665] ? xlog_force_shutdown+0x3b/0x170
[ 6559.054819] xfs_log_force+0x77/0x230
[ 6559.057455] xlog_force_shutdown+0x3b/0x170
[ 6559.060507] xfs_do_force_shutdown+0xd4/0x200
[ 6559.063798] ? xfs_buf_rele+0x1bd/0x580
[ 6559.066541] xfs_buf_ioend_handle_error+0x163/0x2e0
[ 6559.070099] xfs_buf_ioend+0x61/0x200
[ 6559.072728] xfs_buf_ioend_work+0x15/0x20
[ 6559.075706] process_scheduled_works+0x1d4/0x400
[ 6559.078814] worker_thread+0x234/0x2e0
[ 6559.081300] kthread+0x147/0x170
[ 6559.083462] ? __pfx_worker_thread+0x10/0x10
[ 6559.086295] ? __pfx_kthread+0x10/0x10
[ 6559.088771] ret_from_fork+0x3e/0x50
[ 6559.091153] ? __pfx_kthread+0x10/0x10
[ 6559.093624] ret_from_fork_asm+0x1a/0x30
[ 6559.096227] </TASK>
[ 6559.109304] Workqueue: xfs-cil/dm-2 xlog_cil_push_work
[ 6559.112673] Call Trace:
[ 6559.114333] <TASK>
[ 6559.115760] __schedule+0x650/0xb10
[ 6559.118084] schedule+0x6d/0xf0
[ 6559.120175] schedule_timeout+0x31/0x180
[ 6559.122776] ? call_rcu+0xee/0x2f0
[ 6559.125034] __down_common+0xbe/0x1f0
[ 6559.127470] __down+0x1d/0x30
[ 6559.129458] down+0x48/0x50
[ 6559.131343] ? xfs_buf_item_unpin+0x8d/0x380
[ 6559.134213] xfs_buf_lock+0x3d/0xe0
[ 6559.136544] xfs_buf_item_unpin+0x8d/0x380
[ 6559.139253] xlog_cil_committed+0x287/0x520
[ 6559.142019] ? sched_clock+0x10/0x30
[ 6559.144384] ? sched_clock_cpu+0x10/0x190
[ 6559.147039] ? psi_group_change+0x48/0x310
[ 6559.149735] ? _raw_spin_unlock+0xe/0x30
[ 6559.152340] ? finish_task_switch+0xbc/0x310
[ 6559.155163] xlog_cil_process_committed+0x6d/0x90
[ 6559.158265] xlog_state_shutdown_callbacks+0x53/0x110
[ 6559.161564] ? xlog_cil_push_work+0xa70/0xaf0
[ 6559.164441] xlog_state_release_iclog+0xba/0x1b0
[ 6559.167483] xlog_cil_push_work+0xa70/0xaf0
[ 6559.170260] process_scheduled_works+0x1d4/0x400
[ 6559.173286] worker_thread+0x234/0x2e0
[ 6559.175779] kthread+0x147/0x170
[ 6559.177933] ? __pfx_worker_thread+0x10/0x10
[ 6559.180748] ? __pfx_kthread+0x10/0x10
[ 6559.183231] ret_from_fork+0x3e/0x50
[ 6559.185601] ? __pfx_kthread+0x10/0x10
[ 6559.188092] ret_from_fork_asm+0x1a/0x30
[ 6559.190692] </TASK>
This is an ABBA deadlock where buffer IO completion is triggering a
forced shutdown with the buffer lock held. It is waiting for the CIL
to flush as part of the log force. The CIL flush is blocked doing
shutdown processing of all it's objects, trying to unpin a buffer
item. That requires taking the buffer lock....
For the CIL to be doing shutdown processing, the log must be marked
with XLOG_IO_ERROR, but that doesn't happen until after the log
force is issued. Hence for xfs_do_force_shutdown() to be forcing
the log on a shut down log, we must have had a racing
xlog_force_shutdown and xfs_force_shutdown like so:
p0 p1 CIL push
<holds buffer lock>
xlog_force_shutdown
xfs_log_force
test_and_set_bit(XLOG_IO_ERROR)
xlog_state_release_iclog()
sees XLOG_IO_ERROR
xlog_state_shutdown_callbacks
....
xfs_buf_item_unpin
xfs_buf_lock
<blocks on buffer p1 holds>
xfs_force_shutdown
xfs_set_shutdown(mp) wins
xlog_force_shutdown
xfs_log_force
<blocks on CIL push>
xfs_set_shutdown(mp) fails
<shuts down rest of log>
The deadlock can be mitigated by avoiding the log force on the
second pass through xlog_force_shutdown. Do this by adding another
atomic state bit (XLOG_OP_PENDING_SHUTDOWN) that is set on entry to
xlog_force_shutdown() but doesn't mark the log as shutdown.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
I've been seeing this failure on during xfs/050 recently:
XFS: Assertion failed: dst->d_spc_timer != 0, file: fs/xfs/xfs_qm_syscalls.c, line: 435
....
Call Trace:
<TASK>
xfs_qm_scall_getquota_fill_qc+0x2a2/0x2b0
xfs_qm_scall_getquota_next+0x69/0xa0
xfs_fs_get_nextdqblk+0x62/0xf0
quota_getnextxquota+0xbf/0x320
do_quotactl+0x1a1/0x410
__se_sys_quotactl+0x126/0x310
__x64_sys_quotactl+0x21/0x30
x64_sys_call+0x2819/0x2ee0
do_syscall_64+0x68/0x130
entry_SYSCALL_64_after_hwframe+0x76/0x7e
It turns out that the _qmount call has silently been failing to
unmount and mount the filesystem, so when the softlimit is pushed
past with a buffered write, it is not getting synced to disk before
the next quota report is being run.
Hence when the quota report runs, we have 300 blocks of delalloc
data on an inode, with a soft limit of 200 blocks. XFS dquots
account delalloc reservations as used space, hence the dquot is over
the soft limit.
However, we don't update the soft limit timers until we do a
transactional update of the dquot. That is, the dquot sits over the
soft limit without a softlimit timer being started until writeback
occurs and the allocation modifies the dquot and we call
xfs_qm_adjust_dqtimers() from xfs_trans_apply_dquot_deltas() in
xfs_trans_commit() context.
This isn't really a problem, except for this debug code in
xfs_qm_scall_getquota_fill_qc():
if (xfs_dquot_is_enforced(dqp) && dqp->q_id != 0) {
if ((dst->d_space > dst->d_spc_softlimit) &&
(dst->d_spc_softlimit > 0)) {
ASSERT(dst->d_spc_timer != 0);
}
....
It asserts taht if the used block count is over the soft limit,
it *must* have a soft limit timer running. This is clearly not
the case, because we haven't committed the delalloc space to disk
yet. Hence the soft limit is only exceeded temporarily in memory
(which isn't an issue) and we start the timer the moment we exceed
the soft limit in journalled metadata.
This debug was introduced in:
commit 0d5ad8383061fbc0a9804fbb98218750000fe032
Author: Supriya Wickrematillake <sup@sgi.com>
Date: Wed May 15 22:44:44 1996 +0000
initial checkin
quotactl syscall functions.
The very first quota support commit back in 1996. This is zero-day
debug for Irix and, as it turns out, a zero-day bug in the debug
code because the delalloc code on Irix didn't update the softlimit
timers, either.
IOWs, this issue has been in the code for 28 years.
We obviously don't care if soft limit timers are a bit rubbery when
we have delalloc reservations in memory. Production systems running
quota reports have been exposed to this situation for 28 years and
nobody has noticed it, so the debug code is essentially worthless at
this point in time.
We also have the on-disk dquot verifiers checking that the soft
limit timer is running whenever the dquot is over the soft limit
before we write it to disk and after we read it from disk. These
aren't firing, so it is clear the issue is purely a temporary
in-memory incoherency that I never would have noticed had the test
not silently failed to unmount the filesystem.
Hence I'm simply going to trash this runtime debug because it isn't
useful in the slightest for catching quota bugs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The runt AG at the end of a filesystem is almost always smaller than
the mp->m_sb.sb_agblocks. Unfortunately, when setting the max_agbno
limit for the inode chunk allocation, we do not take this into
account. This means we can allocate a sparse inode chunk that
overlaps beyond the end of an AG. When we go to allocate an inode
from that sparse chunk, the irec fails validation because the
agbno of the start of the irec is beyond valid limits for the runt
AG.
Prevent this from happening by taking into account the size of the
runt AG when allocating inode chunks. Also convert the various
checks for valid inode chunk agbnos to use xfs_ag_block_count()
so that they will also catch such issues in the future.
Fixes: 56d1115c9b ("xfs: allocate sparse inode chunks on full chunk allocation failure")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Compat features are new features that older kernels can safely ignore,
allowing read-write mounts without issues. The current sb write validation
implementation returns -EFSCORRUPTED for unknown compat features,
preventing filesystem write operations and contradicting the feature's
definition.
Additionally, if the mounted image is unclean, the log recovery may need
to write to the superblock. Returning an error for unknown compat features
during sb write validation can cause mount failures.
Although XFS currently does not use compat feature flags, this issue
affects current kernels' ability to mount images that may use compat
feature flags in the future.
Since superblock read validation already warns about unknown compat
features, it's unnecessary to repeat this warning during write validation.
Therefore, the relevant code in write validation is being removed.
Fixes: 9e037cb797 ("xfs: check for unknown v5 feature bits in superblock write verifier")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_attr_shortform_list() only called from a non-transactional context, it
hold ilock before alloc memory and maybe trapped in memory reclaim. Since
commit 204fae32d5f7("xfs: clean up remaining GFP_NOFS users") removed
GFP_NOFS flag, lockdep warning will be report as [1]. Eliminate lockdep
false positives by use __GFP_NOLOCKDEP to alloc memory
in xfs_attr_shortform_list().
[1] https://lore.kernel.org/linux-xfs/000000000000e33add0616358204@google.com/
Reported-by: syzbot+4248e91deb3db78358a2@syzkaller.appspotmail.com
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----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=V1oj
-----END PGP SIGNATURE-----
Merge tag 'jfs-6.13' of github.com:kleikamp/linux-shaggy
Pull jfs updates from Dave Kleikamp:
"A few more patches to add sanity checks in jfs"
* tag 'jfs-6.13' of github.com:kleikamp/linux-shaggy:
jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree
jfs: xattr: check invalid xattr size more strictly
jfs: fix array-index-out-of-bounds in jfs_readdir
jfs: fix shift-out-of-bounds in dbSplit
jfs: array-index-out-of-bounds fix in dtReadFirst
- Fix recovery of locks that are being converted between PR/CW modes.
- Fix cleanup of rsb list if recovery is interrupted during recover_members.
- Fix null dereference in debug code if dlm api is called improperly.
- Fix wrong args passed to trace function.
- Move error checks out of add_to_waiters so the function can't fail.
- Clean up some code for configfs.
-----BEGIN PGP SIGNATURE-----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=5K+Y
-----END PGP SIGNATURE-----
Merge tag 'dlm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Fix recovery of locks that are being converted between PR/CW modes
- Fix cleanup of rsb list if recovery is interrupted during
recover_members
- Fix null dereference in debug code if dlm api is called improperly
- Fix wrong args passed to trace function
- Move error checks out of add_to_waiters so the function can't fail
- Clean up some code for configfs
* tag 'dlm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: fix dlm_recover_members refcount on error
dlm: fix recovery of middle conversions
dlm: make add_to_waiters() that it can't fail
dlm: dlm_config_info config fields to unsigned int
dlm: use dlm_config as only cluster configuration
dlm: handle port as __be16 network byte order
dlm: disallow different configs nodeid storages
dlm: fix possible lkb_resource null dereference
dlm: fix swapped args sb_flags vs sb_status
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WikACgkQnJ2qBz9k
QNnZdwf9FfT95zhnNWk3ohNOh5BO0P/uTY2fNkQBDPLPY3Bi8nywPIjXYCDSOgX1
SBV0rakkWp+rVO1/qkg5J1mUvBoefzT7O17rG0LfRw3zjHPX+XeO+e3Xf/kPmJHJ
3fvN//VTZQ6uPcn8PWgLe8VVQqNXD3nlUrwz/JKaxyodsdm0ERej4QZjG6Cikotk
aKuDPAnOiS37/lIFZGdJRca/rwJPwMekNt1SxVrnmin0/QfB/Uubba2+NNdQ+z3W
SCA/26PK822T3ELB8BkfwpdINC17WUwDJlkC8qha/JRzDlxJC/ysr43fHn/7Adfb
CthG8V4JDGm51jcC0qe0Yk2HV75U4A==
=htHs
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A couple of smaller random fsnotify fixes"
* tag 'fsnotify_for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Fix ordering of iput() and watched_objects decrement
fsnotify: fix sending inotify event with unexpected filename
fanotify: allow reporting errors on failure to open fd
fsnotify, lsm: Decouple fsnotify from lsm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WXkACgkQnJ2qBz9k
QNnwjAf/c8K3Vhw9RuKMtPF0K+gC//0mLsq+WmgrtXfMLvbSymrACnwHFJzpNGeS
iEqCYlCC7vlqzPXpsVRlFeHpM52oVnE/wFF0Hp1h/Y1oqbRSzur6iSl4epmmBN+K
AsPoWEXco7ABqtrhoZb0b1n7io9VorHN4nLhO6KWD83nZAawJDWgSw0sNCqcT6to
vVxR3baP/EhONxNquxXe2lxq26dMilehmTk4AOyYslNYb0iG4r18TPyNb7fmuuKG
M+nFfMnM9EPH8lnmgx6Mg/X77d/eZoq4pMRmeqSsroB5k/AQJnNrGweNL1+yr7OY
adWNOMGWdNNQXPFgGbL5yZwNZ64kRA==
=Eq1B
-----END PGP SIGNATURE-----
Merge tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull reiserfs removal from Jan Kara:
"The deprecation period of reiserfs is ending at the end of this year
so it is time to remove it"
* tag 'reiserfs_delete' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: The last commit
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmc/WPcACgkQnJ2qBz9k
QNkRXwgAlN2gbf1O2Df3NFl7CXt5jXhlvQ9UdA77F/j1YFL90kieVrHvQY1yManO
+Z36nwWPTaigR7COuF9oFpCZsp6H1YY8yeqlATE+kZBFqSFQjFP8jpgZ/1JObs0M
C2DeNibrhYm81FJhnetXyTnXifUv20Fa7xwHv5ULtZjPF0MY6ry4zqy+t4fE68Uq
OhGyjwrTW2k1Dv36Nx6CAt3KOWvM5KPHVBpMu2frSRwNB7XBEfmfeCjqISjYccPl
WzHsEQof7Re14GZOa9M6G/efLdXAiwFJF/w2BFCqcijLpjbBrHheEH8N9WBWoATd
wJLt94PRTK2uJqc3jQ3tANR3gQO9Xg==
=XneM
-----END PGP SIGNATURE-----
Merge tag 'for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and isofs updates from Jan Kara:
"Fix a memory leak in isofs and a cleanup of includes in quota"
* tag 'for_v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
dquot.c: get rid of include ../internal.h
isofs: avoid memory leak in iocharset
* convert perag to use xarrays
* create a new generic allocation group structure
* Add metadata inode dir trees
* Create in-core rt allocation groups
* Shard the RT section into allocation groups
* Persist quota options with the enw metadata dir tree
* Enable quota for RT volumes
* Enable metadata directory trees
* Some bugfixes
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQQMHYkcUKcy4GgPe2RGdaER5QtfpgUCZzyNwAAKCRBGdaER5Qtf
psV3AYCncK/pVhFfKQSFbnCvgPSoAe7N9n0Wt5gmjy0Ill2mbQXVl9ADXkH6a015
gcGM3t4BgIHLJQndL/Uz+3a0L5IriEb9QkAfzmx8t3vjiRBzBe3WfywEx9Yt7kZe
xbxEJ2HQpA==
=3ngC
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.13-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Carlos Maiolino:
"The bulk of this pull request is a major rework that Darrick and
Christoph have been doing on XFS's real-time volume, coupled with a
few features to support this rework. It does also includes some bug
fixes.
- convert perag to use xarrays
- create a new generic allocation group structure
- add metadata inode dir trees
- create in-core rt allocation groups
- shard the RT section into allocation groups
- persist quota options with the enw metadata dir tree
- enable quota for RT volumes
- enable metadata directory trees
- some bugfixes"
* tag 'xfs-6.13-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (146 commits)
xfs: port ondisk structure checks from xfs/122 to the kernel
xfs: separate space btree structures in xfs_ondisk.h
xfs: convert struct typedefs in xfs_ondisk.h
xfs: enable metadata directory feature
xfs: enable realtime quota again
xfs: update sb field checks when metadir is turned on
xfs: reserve quota for realtime files correctly
xfs: create quota preallocation watermarks for realtime quota
xfs: report realtime block quota limits on realtime directories
xfs: persist quota flags with metadir
xfs: advertise realtime quota support in the xqm stat files
xfs: scrub quota file metapaths
xfs: fix chown with rt quota
xfs: use metadir for quota inodes
xfs: refactor xfs_qm_destroy_quotainos
xfs: use rtgroup busy extent list for FITRIM
xfs: implement busy extent tracking for rtgroups
xfs: port the perag discard code to handle generic groups
xfs: move the min and max group block numbers to xfs_group
xfs: adjust min_block usage in xfs_verify_agbno
...
- Add SEEK_{DATA,HOLE} support;
- Free redundant pclusters if no cached compressed data is valid;
- Add sysfs entry to drop internal caches;
- Several bugfixes & cleanups.
-----BEGIN PGP SIGNATURE-----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=CRuc
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"There is no outstanding feature for this cycle. The most useful
changes are SEEK_{DATA,HOLE} support and some decompression
micro-optimization. Other than those, there are some bugfixes and
cleanups as usual:
- Add SEEK_{DATA,HOLE} support
- Free redundant pclusters if no cached compressed data is valid
- Add sysfs entry to drop internal caches
- Several bugfixes & cleanups"
* tag 'erofs-for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: handle NONHEAD !delta[1] lclusters gracefully
erofs: clarify direct I/O support
erofs: fix blksize < PAGE_SIZE for file-backed mounts
erofs: get rid of `buf->kmap_type`
erofs: fix file-backed mounts over FUSE
erofs: simplify definition of the log functions
erofs: add sysfs node to drop internal caches
erofs: free pclusters if no cached folio is attached
erofs: sunset `struct erofs_workgroup`
erofs: move erofs_workgroup operations into zdata.c
erofs: get rid of erofs_{find,insert}_workgroup
erofs: add SEEK_{DATA,HOLE} support
If open_cached_dir() encounters an error parsing the lease from the
server, the error handling may race with receiving a lease break,
resulting in open_cached_dir() freeing the cfid while the queued work is
pending.
Update open_cached_dir() to drop refs rather than directly freeing the
cfid.
Have cached_dir_lease_break(), cfids_laundromat_worker(), and
invalidate_all_cached_dirs() clear has_lease immediately while still
holding cfids->cfid_list_lock, and then use this to also simplify the
reference counting in cfids_laundromat_worker() and
invalidate_all_cached_dirs().
Fixes this KASAN splat (which manually injects an error and lease break
in open_cached_dir()):
==================================================================
BUG: KASAN: slab-use-after-free in smb2_cached_lease_break+0x27/0xb0
Read of size 8 at addr ffff88811cc24c10 by task kworker/3:1/65
CPU: 3 UID: 0 PID: 65 Comm: kworker/3:1 Not tainted 6.12.0-rc6-g255cf264e6e5-dirty #87
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Workqueue: cifsiod smb2_cached_lease_break
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x660
kasan_report+0xd3/0x110
smb2_cached_lease_break+0x27/0xb0
process_one_work+0x50a/0xc50
worker_thread+0x2ba/0x530
kthread+0x17c/0x1c0
ret_from_fork+0x34/0x60
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
open_cached_dir+0xa7d/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2464:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x51/0x70
kfree+0x174/0x520
open_cached_dir+0x97f/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Last potentially related work creation:
kasan_save_stack+0x33/0x60
__kasan_record_aux_stack+0xad/0xc0
insert_work+0x32/0x100
__queue_work+0x5c9/0x870
queue_work_on+0x82/0x90
open_cached_dir+0x1369/0x1fb0
smb2_query_path_info+0x43c/0x6e0
cifs_get_fattr+0x346/0xf10
cifs_get_inode_info+0x157/0x210
cifs_revalidate_dentry_attr+0x2d1/0x460
cifs_getattr+0x173/0x470
vfs_statx_path+0x10f/0x160
vfs_statx+0xe9/0x150
vfs_fstatat+0x5e/0xc0
__do_sys_newfstatat+0x91/0xf0
do_syscall_64+0x95/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The buggy address belongs to the object at ffff88811cc24c00
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 16 bytes inside of
freed 1024-byte region [ffff88811cc24c00, ffff88811cc25000)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We can't use PATH_MAX for SMB symlinks because
(1) Windows Server will fail FSCTL_SET_REPARSE_POINT with
STATUS_IO_REPARSE_DATA_INVALID when input buffer is larger than
16K, as specified in MS-FSA 2.1.5.10.37.
(2) The client won't be able to parse large SMB responses that
includes SMB symlink path within SMB2_CREATE or SMB2_IOCTL
responses.
Fix this by defining a maximum length value (4060) for SMB symlinks
that both client and server can handle.
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb2_set_next_command() no longer squashes request iovs into a single
iov, so the bounds check can be dropped.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
After commit f7f291e14d ("cifs: fix oops during encryption"), the
encryption layer can handle vmalloc'd buffers as well as kmalloc'd
buffers, so there is no need to inefficiently squash request iovs
into a single one to handle padding in compound requests.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This client was only requesting READ caching, not READ and HANDLE caching
in the LeaseState on the open requests we send for directories. To
delay closing a handle (e.g. for caching directory contents) we should
be requesting HANDLE as well as READ (as we already do for deferred
close of files). See MS-SMB2 3.3.1.4 e.g.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Windows NFS server versions on Windows Server older than 2012 release use
for storing char and block devices modified SFU format, not compatible with
the original SFU. Windows NFS server on Windows Server 2012 and new
versions use different format (reparse points), not related to SFU-style.
SFU / SUA / Interix subsystem stores the major and major numbers as pair of
64-bit integer, but Windows NFS server stores as pair of 32-bit integers.
Which makes char and block devices between Windows NFS server <<2012 and
Windows SFU/SUA/Interix subsytem incompatible.
So improve Linux SMB client.
When SFU mode is enabled (mount option -o sfu is specified) then recognize
also these kind of char and block devices and its major and minor numbers,
which are used by Windows Server versions older than 2012.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the current implementation, the SMB filesystem on a mount point can
trigger upcalls from the kernel to the userspace to enable certain
functionalities like spnego, dns_resolution, amongst others. These upcalls
usually either happen in the context of the mount or in the context of an
application/user. The upcall handler for cifs, cifs.upcall already has
existing code which switches the namespaces to the caller's namespace
before handling the upcall. This behaviour is expected for scenarios like
multiuser mounts, but might not cover all single user scenario with
services such as Kubernetes, where the mount can happen from different
locations such as on the host, from an app container, or a driver pod
which does the mount on behalf of a different pod.
This patch introduces a new mount option called upcall_target, to
customise the upcall behaviour. upcall_target can take 'mount' and 'app'
as possible values. This aids use cases like Kubernetes where the mount
happens on behalf of the application in another container altogether.
Having this new mount option allows the mount command to specify where the
upcall should happen: 'mount' for resolving the upcall to the host
namespace, and 'app' for resolving the upcall to the ns of the calling
thread. This will enable both the scenarios where the Kerberos credentials
can be found on the application namespace or the host namespace to which
just the mount operation is "delegated".
Reviewed-by: Shyam Prasad <shyam.prasad@microsoft.com>
Reviewed-by: Bharath S M <bharathsm@microsoft.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The cifs_sb_tlink() function can return error pointers, but this code
dereferences it before checking for error pointers. Re-order the code
to fix that.
Fixes: 0f9b6b045bb2 ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The NT ACL format for an SMB3 POSIX Extensions chmod() is a single ACE with the
magic S-1-5-88-3-mode SID:
NT Security Descriptor
Revision: 1
Type: 0x8004, Self Relative, DACL Present
Offset to owner SID: 56
Offset to group SID: 124
Offset to SACL: 0
Offset to DACL: 20
Owner: S-1-5-21-3177838999-3893657415-1037673384-1000
Group: S-1-22-2-1000
NT User (DACL) ACL
Revision: NT4 (2)
Size: 36
Num ACEs: 1
NT ACE: S-1-5-88-3-438, flags 0x00, Access Allowed, mask 0x00000000
Type: Access Allowed
NT ACE Flags: 0x00
Size: 28
Access required: 0x00000000
SID: S-1-5-88-3-438
Owner and Group should be NULL, but the server is not required to fail the
request if they are present.
Signed-off-by: Ralph Boehme <slow@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Update this log message since cached fids may represent things other
than the root of a mount.
Fixes: e4029e0726 ("cifs: find and use the dentry for cached non-root directories also")
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
We use rwlock to protect core structure data of extent tree during
its shrink, however, if there is a huge number of extent nodes in
extent tree, during shrink of extent tree, it may hold rwlock for
a very long time, which may trigger kernel hang issue.
This patch fixes to shrink read extent node in batches, so that,
critical region of the rwlock can be shrunk to avoid its extreme
long time hold.
Reported-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/20241112110627.1314632-1-xiuhong.wang@unisoc.com/
Signed-off-by: Xiuhong Wang <xiuhong.wang@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If fs corruption occurs in f2fs_new_node_page(), let's print
more information about corrupted metadata into kernel log.
Meanwhile, it updates to record ERROR_INCONSISTENT_NAT instead
of ERROR_INVALID_BLKADDR if blkaddr in nat entry is not
NULL_ADDR which means nat bitmap and nat entry is inconsistent.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
SBI_POR_DOING can be cleared after recovery is completed, so that
changes made before recovery can be persistent, and subsequent
errors can be recorded into cp/sb.
Signed-off-by: Song Feng <songfeng@oppo.com>
Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com>
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fsync data recovery attempts to check and fix write pointer consistency
of cursegs and all other zones. If the write pointers of cursegs are
unaligned, cursegs are changed to new sections.
If recovery fails, zone write pointers are still checked and fixed,
but the latest checkpoint cannot be written back. Additionally, retry-
mount skips recovery and rolls back to reuse the old cursegs whose
zones are already finished. This can lead to unaligned write later.
This patch addresses the issue by leaving writer pointers untouched if
recovery fails. When retry-mount is performed, cursegs and other zones
are checked and fixed after skipping recovery.
Signed-off-by: Song Feng <songfeng@oppo.com>
Signed-off-by: Yongpeng Yang <yangyongpeng1@oppo.com>
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The unusable cap value must be adjusted before checking whether
checkpoint=disable is feasible.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
dd if=/dev/zero of=file bs=4k count=5
xfs_io file -c "fiemap -v 2 16384"
file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..31]: 139272..139303 32 0x1000
1: [32..39]: 139304..139311 8 0x1001
xfs_io file -c "fiemap -v 0 16384"
file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..31]: 139272..139303 32 0x1000
xfs_io file -c "fiemap -v 0 16385"
file:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..39]: 139272..139311 40 0x1001
There are two problems:
- continuous extent is split to two
- FIEMAP_EXTENT_LAST is missing in last extent
The root cause is: if upper boundary of inquiry crosses extent,
f2fs_map_blocks() will truncate length of returned extent to
F2FS_BYTES_TO_BLK(len), and also, it will stop to query latter
extent or hole to make sure current extent is last or not.
In order to fix this issue, once we found an extent locates
in the end of inquiry range by f2fs_map_blocks(), we need to
expand inquiry range to requiry.
Cc: stable@vger.kernel.org
Fixes: 7f63eb77af ("f2fs: report unwritten area in f2fs_fiemap")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If user give a file size as "length" parameter for fiemap
operations, but if this size is non-block size aligned,
it will show 2 segments fiemap results even this whole file
is contiguous on disk, such as the following results:
./f2fs_io fiemap 0 19034 ylog/analyzer.py
Fiemap: offset = 0 len = 19034
logical addr. physical addr. length flags
0 0000000000000000 0000000020baa000 0000000000004000 00001000
1 0000000000004000 0000000020bae000 0000000000001000 00001001
after this patch:
./f2fs_io fiemap 0 19034 ylog/analyzer.py
Fiemap: offset = 0 len = 19034
logical addr. physical addr. length flags
0 0000000000000000 00000000315f3000 0000000000005000 00001001
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs doesn't support different blksize in one instance, so
bytes_to_blks() and blks_to_bytes() are equal to F2FS_BYTES_TO_BLK
and F2FS_BLK_TO_BYTES, let's use F2FS_BYTES_TO_BLK/F2FS_BLK_TO_BYTES
instead for cleanup.
Reviewed-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It missed to cast variable to unsigned long long type before
bit shift, which will cause overflow, fix it.
Fixes: f7ef9b83b5 ("f2fs: introduce macros to convert bytes and blocks in f2fs")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
strcpy is deprecated. Kernel docs recommend replacing strcpy with
strscpy. The function strcpy() return value isn't used so there
shouldn't be an issue replacing with the safer alternative strscpy.
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Move common code from opt_array/opt_sec_array to helper. This helper
does more than just unescape options, so rename to
statmount_opt_process().
Handle corner case of just a single character in options.
Rename some local variables to better describe their function.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20241120142732.55210-1-mszeredi@redhat.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap zero range flushes pagecache in certain situations to
determine which parts of the range might require zeroing if dirty
data is present in pagecache. The kernel robot recently reported a
regression associated with this flushing in the following stress-ng
workload on XFS:
stress-ng --timeout 60 --times --verify --metrics --no-rand-seed --metamix 64
This workload involves repeated small, strided, extending writes. On
XFS, this produces a pattern of post-eof speculative preallocation,
conversion of preallocation from delalloc to unwritten, dirtying
pagecache over newly unwritten blocks, and then rinse and repeat
from the new EOF. This leads to repetitive flushing of the EOF folio
via the zero range call XFS uses for writes that start beyond
current EOF.
To mitigate this problem, special case EOF block zeroing to prefer
zeroing the folio over a flush when the EOF folio is already dirty.
To do this, split out and open code handling of an unaligned start
offset. This brings most of the performance back by avoiding flushes
on zero range calls via write and truncate extension operations. The
flush doesn't occur in these situations because the entire range is
post-eof and therefore the folio that overlaps EOF is the only one
in the range.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115200155.593665-4-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In preparation for special handling of subranges, lift the zeroed
mapping logic from the iterator into the caller. Since this puts the
pagecache dirty check and flushing in the same place, streamline the
comments a bit as well.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115200155.593665-3-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap_iter_advance() zeroes the processed and mapping fields on
every non-error iteration except for the last expected iteration
(i.e. return 0 expected to terminate the iteration loop). This
appears to be circumstantial as nothing currently relies on these
fields after the final iteration.
Therefore to better faciliate iomap_iter reuse in subsequent
patches, update iomap_iter_advance() to always reset per-iteration
state on successful completion.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115200155.593665-2-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap_zero_range() uses buffered writes for manual zeroing, no
longer updates i_size for such writes, but is still explicitly
called for post-eof ranges. The historical use case for this is
zeroing post-eof speculative preallocation on extending writes from
XFS. However, XFS also recently changed to convert all post-eof
delalloc mappings to unwritten in the iomap_begin() handler, which
means it now never expects manual zeroing of post-eof mappings. In
other words, all post-eof mappings should be reported as holes or
unwritten.
This is a subtle dependency that can be hard to detect if violated
because associated codepaths are likely to update i_size after folio
locks are dropped, but before writeback happens to occur. For
example, if XFS reverts back to some form of manual zeroing of
post-eof blocks on write extension, writeback of those zeroed folios
will now race with the presumed i_size update from the subsequent
buffered write.
Since iomap_zero_range() can't correctly zero post-eof mappings
beyond EOF without updating i_size, warn if this ever occurs. This
serves as minimal indication that if this use case is reintroduced
by a filesystem, iomap_zero_range() might need to reconsider i_size
updates for write extending use cases.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20241115145931.535207-1-bfoster@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
- Tree wide:
* Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
- Core code:
* Prevent freeing an interrupt in the devres code which is not managed
by devres in the first place.
* Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
* Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which checks
whether ksoftirqd should be woken up. The latter is a pointless
exercise as both soft interrupts are raised in the context of the
timer interrupt and therefore never wake up ksoftirqd.
* Delegate timer/hrtimer soft interrupt processing to a dedicated thread
on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
- Drivers:
* New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
* Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
has its own GIC (Generic Interrupt Controller). This requires to
access the GIC of a remote cluster through a redirect register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC details.
* Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
* Small cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=JqxC
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmc6oE0ACgkQSfxwEqXe
A65n5BAAtNmfBJhYRiC6Svsg7+ktHmhCAHoHwnP7sv+bjs81FRAEv21CsfI+02Nb
zUvaPuyiLtYzlWxzE5Yg44v1cADHAq+QZE1Fg5yl7ge6zPZ3+S1pv/8suNSyyI2M
PKvh1sb4OkUtqplveYSuP1J87u55zAtV9mP9qC3hSlY3XkeQUObt9Awss8peOMdv
sH2AxwBlRkqFXpY2worxlfg3p5iLemb3AUZ3f0Jc6fRmOagSJCt7i4mDrWo3EXke
90Ao8ypY0x3YVGRFACHnxCS53X20HGwLxm7jdicfriMCzAJ6JQR6asO+NYnXR+Ev
9Za3UquVHP6HbQGWj6d1k5k2nF+IbkTHTgFBPRK/CY9ZpVbP04B2K7tE1gmT81wj
AscRGi9RBVBPKAUguyi99MXYlprFG/ZTLOux3hvdarv5u0bP94eXmy1FrRM+IO0r
u4BiQ39FlkDdtRxjzKfCiKkMrf3NmFEciZJhxCnflzmOBaj64r1hRt/ea8Bjxvp3
a4k0MfULmcEn2JwPiT1/Swz45ypZQc4OgbP87SCU8P0a23r21r2oK+9v3No/rCzB
TI0fP6ykDTFQoiKUOSg1mJmkipdjeDyQ9E+0XIDsKd+T8Yv9rFoaV6RWoMrkt4AJ
Yea9+V+XEI8F3SjhdD4OL/s3/+bjTjnRHDaXnJf2XzGmXcuvnbs=
=o4ww
-----END PGP SIGNATURE-----
Merge tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"This contains a single series from Uros to replace uses of
<linux/random.h> with prandom.h or other more specific headers
as needed, in order to avoid a circular header issue.
Uros' goal is to be able to use percpu.h from prandom.h, which
will then allow him to define __percpu in percpu.h rather than
in compiler_types.h"
* tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: Include <linux/percpu.h> in <linux/prandom.h>
random: Do not include <linux/prandom.h> in <linux/random.h>
netem: Include <linux/prandom.h> in sch_netem.c
lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h>
lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h>
bpf/tests: Include <linux/prandom.h> instead of <linux/random.h>
lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h>
random32: Include <linux/prandom.h> instead of <linux/random.h>
kunit: string-stream-test: Include <linux/prandom.h>
lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h>
bpf: Include <linux/prandom.h> instead of <linux/random.h>
scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h>
fscrypt: Include <linux/once.h> in fs/crypto/keyring.c
mtd: tests: Include <linux/prandom.h> instead of <linux/random.h>
media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c
drm/lib: Include <linux/prandom.h> instead of <linux/random.h>
drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h>
crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h>
x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
When a request to evict an inode comes in over the network, we are
trying to grab an inode reference via the iopen glock's gl_object
pointer. There is a very small probability that by the time such a
request comes in, inode creation hasn't completed and the I_NEW flag is
still set. To deal with that, wait for the inode and then check if
inode creation was successful.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The mechanism to defer deleting unlinked inodes is tied to
delete_work_func(), which is tied to iopen glocks. When we don't have
an iopen glock, we must carry out deletes immediately instead.
Fixes a NULL pointer dereference in gfs2_evict_inode().
Fixes: 8c21c2c71e ("gfs2: Call gfs2_queue_verify_delete from gfs2_evict_inode")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The peer seq is used as the issue_seq. Use that name for consistency.
See also ceph.git commit 1da6ef237fc7 ("include/ceph_fs: correct
ceph_mds_cap_peer field name").
Link: https://tracker.ceph.com/issues/66704
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The issue_seq is sent with bulk cap releases, not the current sequence
number. See also ceph.git commit 655cddb7c9f3 ("include/ceph_fs: correct
ceph_mds_cap_item field name").
Link: https://tracker.ceph.com/issues/66704
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
* Support for running Linux in a protected VM under the Arm Confidential
Compute Architecture (CCA)
* Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from libc
* AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
* Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously only
exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing the
signal handler in line with the x86 behaviour for 6.12
* arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access control
- Switch back to platform_driver::remove() now that it returns 'void'
- Add some missing events for the CXL PMU driver
* Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
-----BEGIN PGP SIGNATURE-----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=wDot
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
nfsd currently only uses a single slot in the callback channel, which is
proving to be a bottleneck in some cases. Widen the callback channel to
a max of 32 slots (subject to the client's target_maxreqs value).
Change the cb_holds_slot boolean to an integer that tracks the current
slot number (with -1 meaning "unassigned"). Move the callback slot
tracking info into the session. Add a new u32 that acts as a bitmap to
track which slots are in use, and a u32 to track the latest callback
target_slotid that the client reports. To protect the new fields, add
a new per-session spinlock (the se_lock). Fix nfsd41_cb_get_slot to always
search for the lowest slotid (using ffs()).
Finally, convert the session->se_cb_seq_nr field into an array of
ints and add the necessary handling to ensure that the seqids get
reset when the slot table grows after shrinking.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
added back in 2015 for the sake of vfs_clone_file_range(),
which is in linux/fs.h these days
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The action force umount(umount -f) will attempt to kill all rpc_task even
umount operation may ultimately fail if some files remain open.
Consequently, if an action attempts to open a file, it can potentially
send two rpc_task to nfs server.
NFS CLIENT
thread1 thread2
open("file")
...
nfs4_do_open
_nfs4_do_open
_nfs4_open_and_get_state
_nfs4_proc_open
nfs4_run_open_task
/* rpc_task1 */
rpc_run_task
rpc_wait_for_completion_task
umount -f
nfs_umount_begin
rpc_killall_tasks
rpc_signal_task
rpc_task1 been wakeup
and return -512
_nfs4_do_open // while loop
...
nfs4_run_open_task
/* rpc_task2 */
rpc_run_task
rpc_wait_for_completion_task
While processing an open request, nfsd will first attempt to find or
allocate an nfs4_openowner. If it finds an nfs4_openowner that is not
marked as NFS4_OO_CONFIRMED, this nfs4_openowner will released. Since
two rpc_task can attempt to open the same file simultaneously from the
client to server, and because two instances of nfsd can run
concurrently, this situation can lead to lots of memory leak.
Additionally, when we echo 0 to /proc/fs/nfsd/threads, warning will be
triggered.
NFS SERVER
nfsd1 nfsd2 echo 0 > /proc/fs/nfsd/threads
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// alloc oo1, stateid1
nfsd4_open
nfsd4_process_open1
find_or_alloc_open_stateowner
// find oo1, without NFS4_OO_CONFIRMED
release_openowner
unhash_openowner_locked
list_del_init(&oo->oo_perclient)
// cannot find this oo
// from client, LEAK!!!
alloc_stateowner // alloc oo2
nfsd4_process_open2
init_open_stateid
// associate oo1
// with stateid1, stateid1 LEAK!!!
nfs4_get_vfs_file
// alloc nfsd_file1 and nfsd_file_mark1
// all LEAK!!!
nfsd4_process_open2
...
write_threads
...
nfsd_destroy_serv
nfsd_shutdown_net
nfs4_state_shutdown_net
nfs4_state_destroy_net
destroy_client
__destroy_client
// won't find oo1!!!
nfsd_shutdown_generic
nfsd_file_cache_shutdown
kmem_cache_destroy
for nfsd_file_slab
and nfsd_file_mark_slab
// bark since nfsd_file1
// and nfsd_file_mark1
// still alive
=======================================================================
BUG nfsd_file (Not tainted): Objects remaining in nfsd_file on
__kmem_cache_shutdown()
-----------------------------------------------------------------------
Slab 0xffd4000004438a80 objects=34 used=1 fp=0xff11000110e2ad28
flags=0x17ffffc0000240(workingset|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 4 UID: 0 PID: 757 Comm: sh Not tainted 6.12.0-rc6+ #19
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
slab_err+0xb0/0xf0
__kmem_cache_shutdown+0x15c/0x310
kmem_cache_destroy+0x66/0x160
nfsd_file_cache_shutdown+0xac/0x210 [nfsd]
nfsd_destroy_serv+0x251/0x2a0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1ae/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Disabling lock debugging due to kernel taint
Object 0xff11000110e2ac38 @offset=3128
Allocated in nfsd_file_do_acquire+0x20f/0xa30 [nfsd] age=1635 cpu=3
pid=800
nfsd_file_do_acquire+0x20f/0xa30 [nfsd]
nfsd_file_acquire_opened+0x5f/0x90 [nfsd]
nfs4_get_vfs_file+0x4c9/0x570 [nfsd]
nfsd4_process_open2+0x713/0x1070 [nfsd]
nfsd4_open+0x74b/0x8b0 [nfsd]
nfsd4_proc_compound+0x70b/0xc20 [nfsd]
nfsd_dispatch+0x1b4/0x3a0 [nfsd]
svc_process_common+0x5b8/0xc50 [sunrpc]
svc_process+0x2ab/0x3b0 [sunrpc]
svc_handle_xprt+0x681/0xa20 [sunrpc]
nfsd+0x183/0x220 [nfsd]
kthread+0x199/0x1e0
ret_from_fork+0x31/0x60
ret_from_fork_asm+0x1a/0x30
Add nfs4_openowner_unhashed to help found unhashed nfs4_openowner, and
break nfsd4_open process to fix this problem.
Cc: stable@vger.kernel.org # v5.4+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Keep async copy state alive for a few lease cycles after the copy
completes so that OFFLOAD_STATUS returns something meaningful.
This means that NFSD's client shutdown processing needs to purge
any of this state that happens to be waiting to die.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 7862 Section 4.8 states:
> A copy offload stateid will be valid until either (A) the client
> or server restarts or (B) the client returns the resource by
> issuing an OFFLOAD_CANCEL operation or the client replies to a
> CB_OFFLOAD operation.
Instead of releasing async copy state when the CB_OFFLOAD callback
completes, now let it live until the next laundromat run after the
callback completes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently __destroy_client() consults the nfs4_client's async_copies
list to determine whether there are ongoing async COPY operations.
However, NFSD now keeps copy state in that list even when the
async copy has completed, to enable OFFLOAD_STATUS to find the
COPY results for a while after the COPY has completed.
DESTROY_CLIENTID should not be blocked if the client's async_copies
list contains state for only completed copy operations.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 7862 permits callback services to respond to CB_OFFLOAD with
NFS4ERR_DELAY. Currently NFSD drops the CB_OFFLOAD in that case.
To improve the reliability of COPY offload, NFSD should rather send
another CB_OFFLOAD completion notification.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC 7862 Section 4.8 states:
> A copy offload stateid will be valid until either (A) the client
> or server restarts or (B) the client returns the resource by
> issuing an OFFLOAD_CANCEL operation or the client replies to a
> CB_OFFLOAD operation.
Currently, NFSD purges the metadata for an async COPY operation as
soon as the CB_OFFLOAD callback has been sent. It does not wait even
for the client's CB_OFFLOAD response, as the paragraph above
suggests that it should.
This makes the OFFLOAD_STATUS operation ineffective during the
window between the completion of an asynchronous COPY and the
server's receipt of the corresponding CB_OFFLOAD response. This is
important if, for example, the client responds with NFS4ERR_DELAY,
or the transport is lost before the server receives the response. A
client might use OFFLOAD_STATUS to query the server about the still
pending asynchronous COPY, but NFSD will respond to OFFLOAD_STATUS
as if it had never heard of the presented copy stateid.
This patch starts to address this issue by extending the lifetime of
struct nfsd4_copy at least until the server has seen the client's
CB_OFFLOAD response, or the CB_OFFLOAD has timed out.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd4_shutdown_copy() is just this:
while ((copy = nfsd4_get_copy(clp)) != NULL)
nfsd4_stop_copy(copy);
nfsd4_get_copy() bumps @copy's reference count, preventing
nfsd4_stop_copy() from releasing @copy.
A while loop like this usually works by removing the first element
of the list, but neither nfsd4_get_copy() nor nfsd4_stop_copy()
alters the async_copies list.
Best I can tell, then, is that nfsd4_shutdown_copy() continues to
loop until other threads manage to remove all the items from this
list. The spinning loop blocks shutdown until these items are gone.
Possibly the reason we haven't seen this issue in the field is
because client_has_state() prevents __destroy_client() from calling
nfsd4_shutdown_copy() if there are any items on this list. In a
subsequent patch I plan to remove that restriction.
Fixes: e0639dc580 ("NFSD introduce async copy feature")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
While this holds the flags from the CREATE_SESSION request, nothing
ever consults them. The only flag used is NFS4_SESSION_DEAD. Make it a
simple bool instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This field is written and is never consulted again. Remove it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
refcount_t, by design, checks for unwanted situations and provides
warnings. It is rarely useful to have explicit warnings with refcount
usage.
In this case we have an explicit warning if a refcount_t reaches zero
when decremented. Simply using refcount_dec() will provide a similar
warning and also mark the refcount_t as saturated to avoid any possible
use-after-free.
This patch drops the warning and uses refcount_dec() instead of
refcount_dec_and_test().
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Failing OP_SETCLIENTID or OP_EXCHANGE_ID should only happen if there is
memory allocation failure. Putting a hard limit on the number of
clients is not really helpful as it will either happen too early and
prevent clients that the server can easily handle, or too late and
allow clients when the server is swamped.
The calculated limit is still useful for expiring courtesy clients where
there are "too many" clients, but it shouldn't prevent the creation of
active clients.
Testing of lots of clients against small-mem servers reports repeated
NFS4ERR_DELAY responses which doesn't seem helpful. There may have been
reports of similar problems in production use.
Also remove an outdated comment - we do use a slab cache.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The last reference for `cache_head` can be reduced to zero in `c_show`
and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently,
`svc_export_put` and `expkey_put` will be invoked, leading to two
issues:
1. The `svc_export_put` will directly free ex_uuid. However,
`e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can
trigger a use-after-free issue, shown below.
==================================================================
BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd]
Read of size 1 at addr ff11000010fdc120 by task cat/870
CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_address_description.constprop.0+0x2c/0x3a0
print_report+0xb9/0x280
kasan_report+0xae/0xe0
svc_export_show+0x362/0x430 [nfsd]
c_show+0x161/0x390 [sunrpc]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
proc_reg_read+0xe1/0x140
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 830:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_node_track_caller_noprof+0x1bc/0x400
kmemdup_noprof+0x22/0x50
svc_export_parse+0x8a9/0xb80 [nfsd]
cache_do_downcall+0x71/0xa0 [sunrpc]
cache_write_procfs+0x8e/0xd0 [sunrpc]
proc_reg_write+0xe1/0x140
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 868:
kasan_save_stack+0x20/0x40
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x37/0x50
kfree+0xf3/0x3e0
svc_export_put+0x87/0xb0 [nfsd]
cache_purge+0x17f/0x1f0 [sunrpc]
nfsd_destroy_serv+0x226/0x2d0 [nfsd]
nfsd_svc+0x125/0x1e0 [nfsd]
write_threads+0x16a/0x2a0 [nfsd]
nfsctl_transaction_write+0x74/0xa0 [nfsd]
vfs_write+0x1a5/0x6d0
ksys_write+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`.
However, `svc_export_put`/`expkey_put` will call path_put, which
subsequently triggers a sleeping operation due to the following
`dput`.
=============================
WARNING: suspicious RCU usage
5.10.0-dirty #141 Not tainted
-----------------------------
...
Call Trace:
dump_stack+0x9a/0xd0
___might_sleep+0x231/0x240
dput+0x39/0x600
path_put+0x1b/0x30
svc_export_put+0x17/0x80
e_show+0x1c9/0x200
seq_read_iter+0x63f/0x7c0
seq_read+0x226/0x2d0
vfs_read+0x113/0x2c0
ksys_read+0xc9/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Fix these issues by using `rcu_work` to help release
`svc_expkey`/`svc_export`. This approach allows for an asynchronous
context to invoke `path_put` and also facilitates the freeing of
`uuid/exp/key` after an RCU grace period.
Fixes: 9ceddd9da1 ("knfsd: Allow lockless lookups of the exports")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The function `e_show` was called with protection from RCU. This only
ensures that `exp` will not be freed. Therefore, the reference count for
`exp` can drop to zero, which will trigger a refcount use-after-free
warning when `exp_get` is called. To resolve this issue, use
`cache_get_rcu` to ensure that `exp` remains active.
------------[ cut here ]------------
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 3 PID: 819 at lib/refcount.c:25
refcount_warn_saturate+0xb1/0x120
CPU: 3 UID: 0 PID: 819 Comm: cat Not tainted 6.12.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb1/0x120
...
Call Trace:
<TASK>
e_show+0x20b/0x230 [nfsd]
seq_read_iter+0x589/0x770
seq_read+0x1e5/0x270
vfs_read+0x125/0x530
ksys_read+0xc1/0x160
do_syscall_64+0x5f/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: bf18f163e8 ("NFSD: Using exp_get for export getting")
Cc: stable@vger.kernel.org # 4.20+
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since commit 75c7940d2a ("lockd: set missing fl_flags field when
retrieving args"), nlmsvc_retrieve_args() initializes the flc_flags
field. svcxdr_decode_lock() no longer needs to do this.
This clean up removes one dependency on the nlm_lock:fl field. No
behavior change is expected.
Analysis:
svcxdr_decode_lock() is called by:
nlm4svc_decode_testargs()
nlm4svc_decode_lockargs()
nlm4svc_decode_cancargs()
nlm4svc_decode_unlockargs()
nlm4svc_decode_testargs() is used by:
- NLMPROC4_TEST and NLMPROC4_TEST_MSG, which call nlmsvc_retrieve_args()
- NLMPROC4_GRANTED and NLMPROC4_GRANTED_MSG, which don't pass the
lock's file_lock to the generic lock API
nlm4svc_decode_lockargs() is used by:
- NLMPROC4_LOCK and NLM4PROC4_LOCK_MSG, which call nlmsvc_retrieve_args()
- NLMPROC4_UNLOCK and NLM4PROC4_UNLOCK_MSG, which call nlmsvc_retrieve_args()
- NLMPROC4_NM_LOCK, which calls nlmsvc_retrieve_args()
nlm4svc_decode_cancargs() is used by:
- NLMPROC4_CANCEL and NLMPROC4_CANCEL_MSG, which call nlmsvc_retrieve_args()
nlm4svc_decode_unlockargs() is used by:
- NLMPROC4_UNLOCK and NLMPROC4_UNLOCK_MSG, which call nlmsvc_retrieve_args()
All callers except GRANTED/GRANTED_MSG eventually call
nlmsvc_retrieve_args() before using nlm_lock::fl.c.flc_flags. Thus
this change is safe.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The nlm_cookie parameter has been unused since commit 09802fd2a8
("lockd: rip out deferred lock handling from testlock codepath").
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since commit 103cc1fafe ("SUNRPC: Parametrize how much of argsize
should be zeroed") (and possibly long before that, even) all of the
memory underlying rqstp->rq_argp is zeroed already. There's no need
for the memset() in nlm4svc_decode_shareargs().
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
It's only current caller already length-checks the string, but let's
be safe.
Fixes: 0964a3d3f1 ("[PATCH] knfsd: nfsd4 reboot dirname fix")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. The computed value of @p is saved each time through the
loop but is never used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. The result of "*p++" is saved, but is not used before it
is overwritten. The result of xdr_encode_opaque() is saved each
time through the loop but is never used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
@ses is initialized to NULL. If __nfsd4_find_backchannel() finds no
available backchannel session, setup_callback_client() will try to
dereference @ses and segfault.
Fixes: dcbeaa68db ("nfsd4: allow backchannel recovery")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
fh_size is an unsigned int, thus it can never be less than 0.
Fixes: d8b26071e6 ("NFSD: simplify struct nfsfh")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. AFAICT, there is no way to reach the out_free_conn label
with @old set to a non-NULL value, so the expire_client(old) call
is never reached and can be removed.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSD_MAY_LOCK means a few different things.
- it means that GSS is not required.
- it means that with NFSEXP_NOAUTHNLM, authentication is not required
- it means that OWNER_OVERRIDE is allowed.
None of these are specific to locking, they are specific to the NLM
protocol.
So:
- rename to NFSD_MAY_NLM
- set NFSD_MAY_OWNER_OVERRIDE and NFSD_MAY_BYPASS_GSS in nlm_fopen()
so that NFSD_MAY_NLM doesn't need to imply these.
- move the test on NFSEXP_NOAUTHNLM out of nfsd_permission() and
into fh_verify where other special-case tests on the MAY flags
happen. nfsd_permission() can be called from other places than
fh_verify(), but none of these will have NFSD_MAY_NLM.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSv4 LOCK operations should not avoid the set of authorization
checks that apply to all other NFSv4 operations. Also, the
"no_auth_nlm" export option should apply only to NLM LOCK requests.
It's not necessary or sensible to apply it to NFSv4 LOCK operations.
Instead, set no permission bits when calling fh_verify(). Subsequent
stateid processing handles authorization checks.
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Since SLOB was removed and since
commit 6c6c47b063 ("mm, slab: call kvfree_rcu_barrier() from kmem_cache_destroy()"),
it is not necessary to use call_rcu when the callback only performs
kmem_cache_free. Use kfree_rcu() directly.
The changes were made using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT do not bypass
only GSS, but bypass any method. This is a problem specially for NFS3
AUTH_NULL-only exports.
The purpose of NFSD_MAY_BYPASS_GSS_ON_ROOT is described in RFC 2623,
section 2.3.2, to allow mounting NFS2/3 GSS-only export without
authentication. So few procedures which do not expose security risk used
during mount time can be called also with AUTH_NONE or AUTH_SYS, to allow
client mount operation to finish successfully.
The problem with current implementation is that for AUTH_NULL-only exports,
the NFSD_MAY_BYPASS_GSS_ON_ROOT is active also for NFS3 AUTH_UNIX mount
attempts which confuse NFS3 clients, and make them think that AUTH_UNIX is
enabled and is working. Linux NFS3 client never switches from AUTH_UNIX to
AUTH_NONE on active mount, which makes the mount inaccessible.
Fix the NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT implementation
and really allow to bypass only exports which have enabled some real
authentication (GSS, TLS, or any other).
The result would be: For AUTH_NULL-only export if client attempts to do
mount with AUTH_UNIX flavor then it will receive access errors, which
instruct client that AUTH_UNIX flavor is not usable and will either try
other auth flavor (AUTH_NULL if enabled) or fails mount procedure.
Similarly if client attempt to do mount with AUTH_NULL flavor and only
AUTH_UNIX flavor is enabled then the client will receive access error.
This should fix problems with AUTH_NULL-only or AUTH_UNIX-only exports if
client attempts to mount it with other auth flavor (e.g. with AUTH_NULL for
AUTH_UNIX-only export, or with AUTH_UNIX for AUTH_NULL-only export).
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFSv4.1 OP_EXCHANGE_ID response from server may contain server
implementation details (domain, name and build time) in optional
nfs_impl_id4 field. Currently nfsd does not fill this field.
Send these information in NFSv4.1 OP_EXCHANGE_ID response. Fill them with
the same values as what is Linux NFSv4.1 client doing. Domain is hardcoded
to "kernel.org", name is composed in the same way as "uname -srvm" output
and build time is hardcoded to zeros.
NFSv4.1 client and server implementation fields are useful for statistic
purposes or for identifying type of clients and servers.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NLMv2 is completely different protocol than NLMv1 and NLMv3, and in
original Sun implementation is used for RPC loopback callbacks from statd
to lockd services. Linux does not use nor does not implement NLMv2.
Hence, NLMv3 is not backward compatible with NLMv2. But NLMv3 is backward
compatible with NLMv1. Fix comment.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Turn nfsd_compound_encode_err tracepoint into a class and add a new
nfsd_compound_op_err tracepoint.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmc7S40QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjHVD/43rDZ8ehs+IAAr6S0RemNX1SRG0mK2UOEb
kMoNogS7StO/c4JYW3JuzCyLRn5ZsgeWV/muqxwDEWQrmTGrvi+V45KikrZPwm3k
p0ump33qV9EU2jiR1MKZjtwK2P0CI7/DD3W8ww6IOvKbTT7RcqQcdHznvXArFBtc
xCuQPpayFG7ZasC+N9VaBwtiUEVgU3Ek9AFT7UVZRWajjHPNalQwaooJWayO0rEG
KdoW5yG0ryLrgCY2ACSvRLS+2s14EJtb8hgT08WKHTNgd5LxhSKxfsTapamua+7U
FdVS6Ij0tEkgu2jpvgj7QKO0Uw10Cnep2gj7RHts/LVewvkliS6XcheOzqRS1jWU
I2EI+UaGOZ11OUiw52VIveEVS5zV/NWhgy5BSP9LYEvXw0BUAHRDYGMem8o5G1V1
SWqjIM1UWvcQDlAnMF9FDVzojvjVUmYWvcAlFFztO8J0B7SavHR3NcfHwEf57reH
rNoUbi/9c4/wjJJF33gejiR5pU+ewy/Mk75GrtX3xpEqlztfRbf9/FbPCMEAO1KR
DF/b3lkUV9i2/BRW6a0SpZ5RDSmSYMnateel6TrPyVSRnpiSSFO8FrbynwUOa17b
6i49YDFWzzXOrR1YWDg6IEtTrcmBEmvi7F6aoDs020qUnL0hwLn1ZuoIxuiFEpor
Z0iFF1B/nw==
=PWTH
-----END PGP SIGNATURE-----
Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
-----BEGIN PGP SIGNATURE-----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=aAcf
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Changes outside of btrfs: add io_uring command flag to track a dying
task (the rest will go via the block git tree).
User visible changes:
- wire encoded read (ioctl) to io_uring commands, this can be used on
itself, in the future this will allow 'send' to be asynchronous. As
a consequence, the encoded read ioctl can also work in non-blocking
mode
- new ioctl to wait for cleaned subvolumes, no need to use the
generic and root-only SEARCH_TREE ioctl, will be used by "btrfs
subvol sync"
- recognize different paths/symlinks for the same devices and don't
report them during rescanning, this can be observed with LVM or DM
- seeding device use case change, the sprout device (the one
capturing new writes) will not clear the read-only status of the
super block; this prevents accumulating space from deleted
snapshots
Performance improvements:
- reduce lock contention when traversing extent buffers
- reduce extent tree lock contention when searching for inline
backref
- switch from rb-trees to xarray for delayed ref tracking,
improvements due to better cache locality, branching factors and
more compact data structures
- enable extent map shrinker again (prevent memory exhaustion under
some types of IO load), reworked to run in a single worker thread
(there used to be problems causing long stalls under memory
pressure)
Core changes:
- raid-stripe-tree feature updates:
- make device replace and scrub work
- implement partial deletion of stripe extents
- new selftests
- split the config option BTRFS_DEBUG and add EXPERIMENTAL for
features that are experimental or with known problems so we don't
misuse debugging config for that
- subpage mode updates (sector < page):
- update compression implementations
- update writepage, writeback
- continued folio API conversions:
- buffered writes
- make buffered write copy one page at a time, preparatory work for
future integration with large folios, may cause performance drop
- proper locking of root item regarding starting send
- error handling improvements
- code cleanups and refactoring:
- dead code removal
- unused parameter reduction
- lockdep assertions"
* tag 'for-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (119 commits)
btrfs: send: check for read-only send root under critical section
btrfs: send: check for dead send root under critical section
btrfs: remove check for NULL fs_info at btrfs_folio_end_lock_bitmap()
btrfs: fix warning on PTR_ERR() against NULL device at btrfs_control_ioctl()
btrfs: fix a typo in btrfs_use_zone_append
btrfs: avoid superfluous calls to free_extent_map() in btrfs_encoded_read()
btrfs: simplify logic to decrement snapshot counter at btrfs_mksnapshot()
btrfs: remove hole from struct btrfs_delayed_node
btrfs: update stale comment for struct btrfs_delayed_ref_node::add_list
btrfs: add new ioctl to wait for cleaned subvolumes
btrfs: simplify range tracking in cow_file_range()
btrfs: remove conditional path allocation in btrfs_read_locked_inode()
btrfs: push cleanup into btrfs_read_locked_inode()
io_uring/cmd: let cmds to know about dying task
btrfs: add struct io_btrfs_cmd as type for io_uring_cmd_to_pdu()
btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)
btrfs: move priv off stack in btrfs_encoded_read_regular_fill_pages()
btrfs: don't sleep in btrfs_encoded_read() if IOCB_NOWAIT is set
btrfs: change btrfs_encoded_read() so that reading of extent is done by caller
btrfs: remove pointless iocb::ki_pos addition in btrfs_encoded_read()
...
notably in the journaling code, bufered I/O, and compiler warning
cleanups.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmc7NN4ACgkQ8vlZVpUN
gaMJRAf+Oc3Tn/ZvuX0amkaBQI+ZNIeYD/U0WBSvarKb00bo1X39mM/0LovqV6ec
c51iRgt8U6uDZDUm6zJtppkIUiqkHRj+TmTInueFtmUqhIg8jgfZIpxCn0QkFKnQ
jI5EKCkvUqM0B347axH/s+dlOE9JBSlQNKgjkvCYOGknQ1PH6X8oMDt5QAqGEk3P
Nsa4QChIxt2yujFvydgFT+RAbjvY3sNvrZ7D3B+KL3VSJpILChVZK/UdFrraSXxq
mLO5j4txjtnr/OLgujCTHOfPsTiQReHHXErrSbKhnFhrTXLD0mZSUgJ6irpaxRQ5
wQHQzmsrVwqFfqPU3Hkl8FGeCR0owQ==
=26/E
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of miscellaneous ext4 bug fixes and cleanups this cycle, most
notably in the journaling code, bufered I/O, and compiler warning
cleanups"
* tag 'ext4_for_linus-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
jbd2: Fix comment describing journal_init_common()
ext4: prevent an infinite loop in the lazyinit thread
ext4: use struct_size() to improve ext4_htree_store_dirent()
ext4: annotate struct fname with __counted_by()
jbd2: avoid dozens of -Wflex-array-member-not-at-end warnings
ext4: use str_yes_no() helper function
ext4: prevent delalloc to nodelalloc on remount
jbd2: make b_frozen_data allocation always succeed
ext4: cleanup variable name in ext4_fc_del()
ext4: use string choices helpers
jbd2: remove the 'success' parameter from the jbd2_do_replay() function
jbd2: remove useless 'block_error' variable
jbd2: factor out jbd2_do_replay()
jbd2: refactor JBD2_COMMIT_BLOCK process in do_one_pass()
jbd2: unified release of buffer_head in do_one_pass()
jbd2: remove redundant judgments for check v1 checksum
ext4: use ERR_CAST to return an error-valued pointer
mm: zero range of eof folio exposed by inode size extension
ext4: partial zero eof block on unaligned inode size extension
ext4: disambiguate the return value of ext4_dio_write_end_io()
...
and friends
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdpZQAKCRBZ7Krx/gZQ
6whMAQDhlGFV+nGRetwe4t60mVRpxIoc71GLC7b6V8FmyfTI5AEAkAigkJ8KCZDP
mfGsN/3PtzoxnIkIqdk7Y7q4/fowyAw=
=4DWZ
-----END PGP SIGNATURE-----
Merge tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull statx updates from Al Viro:
"Sanitize struct filename and lookup flags handling in statx and
friends"
* tag 'pull-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: kill empty_dir_getattr()
fs: Simplify getattr interface function checking AT_GETATTR_NOSEC flag
fs/stat.c: switch to CLASS(fd_raw)
kill getname_statx_lookup_flags()
io_statx_prep(): use getname_uflags()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdkpwAKCRBZ7Krx/gZQ
632xAP0WukRCsROhDX1LsNXY+SF3E6znsO8VwjjHTDwZ+dGW6gD/f+KooaGG5qBU
4Z7sVuOIpOOA0S1LLDx8XBYidcG23g8=
=Aw1m
-----END PGP SIGNATURE-----
Merge tag 'pull-ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull ufs updates from Al Viro:
"ufs cleanups, fixes and folio conversion"
* tag 'pull-ufs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ufs: ufs_sb_private_info: remove unused s_{2,3}apb fields
ufs: Convert ufs_change_blocknr() to take a folio
ufs: Pass a folio to ufs_new_fragments()
ufs: Convert ufs_inode_getfrag() to take a folio
ufs: Convert ufs_extend_tail() to take a folio
ufs: Convert ufs_inode_getblock() to take a folio
ufs: take the handling of free block counters into a helper
clean ufs_trunc_direct() up a bit...
ufs: get rid of ubh_{ubhcpymem,memcpyubh}()
ufs_inode_getfrag(): remove junk comment
ufs_free_fragments(): fix the braino in sanity check
ufs_clusteracct(): switch to passing fragment number
ufs: untangle ubh_...block...(), part 3
ufs: untangle ubh_...block...(), part 2
ufs: untangle ubh_...block...() macros, part 1
ufs: fix ufs_read_cylinder() failure handling
ufs: missing ->splice_write()
ufs: fix handling of delete_entry and set_link failures
add *xattrat() syscalls, sanitize struct filename handling in there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdj4gAKCRBZ7Krx/gZQ
6/02AQC8ndn9i1wLGRb5DdZYGNWUDhXCdPrZCF2nyvU2swCIPwEAm1H5F/bxBXeT
6qCLHThVw4KTJOT2aDY03ELrxbi8Vg4=
=35Oj
-----END PGP SIGNATURE-----
Merge tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull xattr updates from Al Viro:
"Sanitize xattr and io_uring interactions with it, add *xattrat()
syscalls, sanitize struct filename handling in there"
* tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr: remove redundant check on variable err
fs/xattr: add *at family syscalls
new helpers: file_removexattr(), filename_removexattr()
new helpers: file_listxattr(), filename_listxattr()
replace do_getxattr() with saner helpers.
replace do_setxattr() with saner helpers.
new helper: import_xattr_name()
fs: rename struct xattr_ctx to kernel_xattr_ctx
xattr: switch to CLASS(fd)
io_[gs]etxattr_prep(): just use getname()
io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE
getname_maybe_null() - the third variant of pathname copy-in
teach filename_lookup() to treat NULL filename as ""
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcmVQAKCRCRxhvAZXjc
ogE8AP9fT1T0rkYHT2ym2ulnQ2oARqO5VOnGmzYiTs2oHAfn4wD9GwH1nkMvlNTY
l7zalIg2AIdN6qvTATSoD3sN+fJXXgU=
=RNSE
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull ecryptfs updates from Christian Brauner:
"The folio project is about to remove page->index. This contains the
work required for ecryptfs"
* tag 'vfs-6.13.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ecryptfs: Pass the folio index to crypt_extent()
ecryptfs: Convert lower_offset_for_page() to take a folio
ecryptfs: Convert ecryptfs_decrypt_page() to take a folio
ecryptfs: Convert ecryptfs_encrypt_page() to take a folio
ecryptfs: Convert ecryptfs_write_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_write() to use a folio
ecryptfs: Convert ecryptfs_read_lower_page_segment() to take a folio
ecryptfs: Convert ecryptfs_copy_up_encrypted_with_header() to take a folio
ecryptfs: Use a folio throughout ecryptfs_read_folio()
ecryptfs: Convert ecryptfs_writepage() to ecryptfs_writepages()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcopwAKCRCRxhvAZXjc
oitWAQD68PGFI6/ES9x+qGsDFEZBH08icuO+a9dyaZXyNRosDgD/ex2zHj6F7IzS
Ghgb9jiqWQ8l2+PDYfisxa/0jiqCbAk=
=DmXf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.untorn.writes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs untorn write support from Christian Brauner:
"An atomic write is a write issed with torn-write protection. This
means for a power failure or any hardware failure all or none of the
data from the write will be stored, never a mix of old and new data.
This work is already supported for block devices. If a block device is
opened with O_DIRECT and the block device supports atomic write, then
FMODE_CAN_ATOMIC_WRITE is added to the file of the opened block
device.
This contains the work to expand atomic write support to filesystems,
specifically ext4 and XFS. Currently, only support for writing exactly
one filesystem block atomically is added.
Since it's now possible to have filesystem block size > page size for
XFS, it's possible to write 4K+ blocks atomically on x86"
* tag 'vfs-6.13.untorn.writes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: drop an obsolete comment in iomap_dio_bio_iter
ext4: Do not fallback to buffered-io for DIO atomic write
ext4: Support setting FMODE_CAN_ATOMIC_WRITE
ext4: Check for atomic writes support in write iter
ext4: Add statx support for atomic writes
xfs: Support setting FMODE_CAN_ATOMIC_WRITE
xfs: Validate atomic writes
xfs: Support atomic write for statx
fs: iomap: Atomic write support
fs: Export generic_atomic_write_valid()
block: Add bdev atomic write limits helpers
fs/block: Check for IOCB_DIRECT in generic_atomic_write_valid()
block/fs: Pass an iocb to generic_atomic_write_valid()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcZIgAKCRCRxhvAZXjc
oge4AQDxhsKW+v/jKHydzqzwG3Ks7DIxrUg/mcGfdtBwjiWgvwEA8t0QAAfKECAK
B0+bNKJ8XJRUtZ10Jgm3dzURbEhBWgU=
=4Lui
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull tmpfs case folding updates from Christian Brauner:
"This adds case-insensitive support for tmpfs.
The work contained in here adds support for case-insensitive file
names lookups in tmpfs. The main difference from other casefold
filesystems is that tmpfs has no information on disk, just on RAM, so
we can't use mkfs to create a case-insensitive tmpfs. For this
implementation, there's a mount option for casefolding. The rest of
the patchset follows a similar approach as ext4 and f2fs.
The use case for this feature is similar to the use case for ext4, to
better support compatibility layers (like Wine), particularly in
combination with sandboxing/container tools (like Flatpak).
Those containerization tools can share a subset of the host filesystem
with an application. In the container, the root directory and any
parent directories required for a shared directory are on tmpfs, with
the shared directories bind-mounted into the container's view of the
filesystem.
If the host filesystem is using case-insensitive directories, then the
application can do lookups inside those directories in a
case-insensitive way, without this needing to be implemented in
user-space. However, if the host is only sharing a subset of a
case-insensitive directory with the application, then the parent
directories of the mount point will be part of the container's root
tmpfs. When the application tries to do case-insensitive lookups of
those parent directories on a case-sensitive tmpfs, the lookup will
fail"
* tag 'vfs-6.13.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tmpfs: Initialize sysfs during tmpfs init
tmpfs: Fix type for sysfs' casefold attribute
libfs: Fix kernel-doc warning in generic_ci_validate_strict_name
docs: tmpfs: Add casefold options
tmpfs: Expose filesystem features via sysfs
tmpfs: Add flag FS_CASEFOLD_FL support for tmpfs dirs
tmpfs: Add casefold lookup support
libfs: Export generic_ci_ dentry functions
unicode: Recreate utf8_parse_version()
unicode: Export latest available UTF-8 version number
ext4: Use generic_ci_validate_strict_name helper
libfs: Create the helper function generic_ci_validate_strict_name()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcg9wAKCRCRxhvAZXjc
ou7GAQDtQ75C+DFjrL4alXjYG7uly0BWgrlRJ4SgNu1I0uUYdgD/UHH2fAkQeKGy
xTGT4z0abiELZw9RQ7F6qbiBhA0nIw8=
=Plww
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs update from Christian Brauner:
"This adds a new ioctl to retrieve information about a pidfd.
A common pattern when using pidfds is having to get information about
the process, which currently requires /proc being mounted, resolving
the fd to a pid, and then do manual string parsing of /proc/N/status
and friends. This needs to be reimplemented over and over in all
userspace projects (e.g.: it has been reimplemented in systemd, dbus,
dbus-daemon, polkit so far), and requires additional care in checking
that the fd is still valid after having parsed the data, to avoid
races.
Having a programmatic API that can be used directly removes all these
requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct so that
more parameters can be added later if needed. Start with returning
pid/tgid/ppid and some creds unconditionally, and cgroupid optionally"
* tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfd: add ioctl to retrieve pid info
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcXJQAKCRCRxhvAZXjc
opmaAQDuEpUXi3PSNwgXGRYAzeBpsonoNrBtzSRTlaza7KZCiAEAsFUSbQJNGdkN
TqC9KvI1EiX2hVvWmVBVttBNH6CY+wY=
=4le5
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull overlayfs updates from Christian Brauner:
"Make overlayfs support specifying layers through file descriptors.
Currently overlayfs only allows specifying layers through path names.
This is inconvenient for users that want to assemble an overlayfs
mount purely based on file descriptors:
This enables user to specify both:
fsconfig(fd_overlay, FSCONFIG_SET_FD, "upperdir+", NULL, fd_upper);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "workdir+", NULL, fd_work);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower1);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower2);
in addition to:
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "upperdir+", "/upper", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "workdir+", "/work", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower1", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower2", 0);
There's also a large set of new overlayfs selftests to test new
features and some older properties"
* tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add test for specifying 500 lower layers
selftests: add overlayfs fd mounting selftests
selftests: use shared header
Documentation,ovl: document new file descriptor based layers
ovl: specify layers via file descriptors
fs: add helper to use mount option as path or fd
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcW4gAKCRCRxhvAZXjc
okF+AP9xTMb2SlnRPBOBd9yFcmVXmQi86TSCUPAEVb+wIldGYwD/RIOdvXYJlp9v
RgJkU1DC3ddkXtONNDY6gFaP+siIWA0=
=gMc7
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcUoQAKCRCRxhvAZXjc
omxAAP9WE8zSxeu7Foa6+OmLO62mYdB8rRrQ4OjzX+zunL0UnAD9FAHPsB4amWm4
/zK3Nf7ipijop5+RgSJTgURffASKOgI=
=ifkk
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"Various fixes for the netfs library and related infrastructure:
cachefiles:
- Fix a dentry leak in cachefiles_open_file()
- Fix incorrect length return value in
cachefiles_ondemand_fd_write_iter()
- Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
- Clean up in cachefiles_commit_tmpfile()
- Fix NULL pointer dereference in object->file
- Add a memory barrier for FSCACHE_VOLUME_CREATING
netfs:
- Remove call to folio_index()
- Fix a few minor bugs in netfs_page_mkwrite()
- Remove unnecessary references to pages"
* tag 'vfs-6.13.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING
cachefiles: Fix NULL pointer dereference in object->file
cachefiles: Clean up in cachefiles_commit_tmpfile()
cachefiles: Fix missing pos updates in cachefiles_ondemand_fd_write_iter()
cachefiles: Fix incorrect length return value in cachefiles_ondemand_fd_write_iter()
netfs: Remove unnecessary references to pages
netfs: Fix a few minor bugs in netfs_page_mkwrite()
netfs: Remove call to folio_index()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcUQAAKCRCRxhvAZXjc
onEpAQCUdwIBHpwmSIFvJFA9aNGpbLzi0dDSEIxuWYtp5qVuogD+ImccwqpG3kEi
Zq9vokdPpB1zbahxKl1mkvBG4G0GFQE=
=LbP6
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.pagecache' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pagecache updates from Christian Brauner:
"Cleanup filesystem page flag usage: This continues the work to make
the mappedtodisk/owner_2 flag available to filesystems which don't use
buffer heads. Further patches remove uses of Private2. This brings us
very close to being rid of it entirely"
* tag 'vfs-6.13.pagecache' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
migrate: Remove references to Private2
ceph: Remove call to PagePrivate2()
btrfs: Switch from using the private_2 flag to owner_2
mm: Remove PageMappedToDisk
nilfs2: Convert nilfs_copy_buffer() to use folios
fs: Move clearing of mappedtodisk to buffer.c
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcT8AAKCRCRxhvAZXjc
or+CAQDb2JkNOVrugXw++kgvHrLBY+7rCzyA+sJhiZu7C7uQogEApQgGP1kjmpi0
f1wR6xomb9AmQNd991F0VWXCPBTUsAk=
=RQnY
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.rust.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs rust file abstractions from Christian Brauner:
"This contains the file abstractions needed by the Rust implementation
of the Binder driver and other parts of the kernel.
Let's treat this as a first attempt at getting something working but I
do expect the actual interfaces to change significantly over time.
Simply because we are still figuring out what actually works. But
there's no point in further theorizing. Let's see how it holds up with
actual users"
* tag 'vfs-6.13.rust.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: task: adjust safety comments in Task methods
rust: add seqfile abstraction
rust: file: add abstraction for `poll_table`
rust: file: add `Kuid` wrapper
rust: file: add `FileDescriptorReservation`
rust: security: add abstraction for secctx
rust: cred: add Rust abstraction for `struct cred`
rust: file: add Rust abstraction for `struct file`
rust: task: add `Task::current_raw`
rust: types: add `NotThreadSafe`
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcToAAKCRCRxhvAZXjc
osL9AP948FFumJRC28gDJ4xp+X4eohNOfkgoEG8FTbF2zU6ulwD+O0pr26FqpFli
pqlG+38UdATImpfqqWjPbb72sBYcfQg=
=wLUh
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Fixup and improve NLM and kNFSD file lock callbacks
Last year both GFS2 and OCFS2 had some work done to make their
locking more robust when exported over NFS. Unfortunately, part of
that work caused both NLM (for NFS v3 exports) and kNFSD (for
NFSv4.1+ exports) to no longer send lock notifications to clients
This in itself is not a huge problem because most NFS clients will
still poll the server in order to acquire a conflicted lock
It's important for NLM and kNFSD that they do not block their
kernel threads inside filesystem's file_lock implementations
because that can produce deadlocks. We used to make sure of this by
only trusting that posix_lock_file() can correctly handle blocking
lock calls asynchronously, so the lock managers would only setup
their file_lock requests for async callbacks if the filesystem did
not define its own lock() file operation
However, when GFS2 and OCFS2 grew the capability to correctly
handle blocking lock requests asynchronously, they started
signalling this behavior with EXPORT_OP_ASYNC_LOCK, and the check
for also trusting posix_lock_file() was inadvertently dropped, so
now most filesystems no longer produce lock notifications when
exported over NFS
Fix this by using an fop_flag which greatly simplifies the problem
and grooms the way for future uses by both filesystems and lock
managers alike
- Add a sysctl to delete the dentry when a file is removed instead of
making it a negative dentry
Commit 681ce86235 ("vfs: Delete the associated dentry when
deleting a file") introduced an unconditional deletion of the
associated dentry when a file is removed. However, this led to
performance regressions in specific benchmarks, such as
ilebench.sum_operations/s, prompting a revert in commit
4a4be1ad3a ("Revert "vfs: Delete the associated dentry when
deleting a file""). This reintroduces the concept conditionally
through a sysctl
- Expand the statmount() system call:
* Report the filesystem subtype in a new fs_subtype field to
e.g., report fuse filesystem subtypes
* Report the superblock source in a new sb_source field
* Add a new way to return filesystem specific mount options in an
option array that returns filesystem specific mount options
separated by zero bytes and unescaped. This allows caller's to
retrieve filesystem specific mount options and immediately pass
them to e.g., fsconfig() without having to unescape or split
them
* Report security (LSM) specific mount options in a separate
security option array. We don't lump them together with
filesystem specific mount options as security mount options are
generic and most users aren't interested in them
The format is the same as for the filesystem specific mount
option array
- Support relative paths in fsconfig()'s FSCONFIG_SET_STRING command
- Optimize acl_permission_check() to avoid costly {g,u}id ownership
checks if possible
- Use smp_mb__after_spinlock() to avoid full smp_mb() in evict()
- Add synchronous wakeup support for ep_poll_callback.
Currently, epoll only uses wake_up() to wake up task. But sometimes
there are epoll users which want to use the synchronous wakeup flag
to give a hint to the scheduler, e.g., the Android binder driver.
So add a wake_up_sync() define, and use wake_up_sync() when sync is
true in ep_poll_callback()
Fixes:
- Fix kernel documentation for inode_insert5() and iget5_locked()
- Annotate racy epoll check on file->f_ep
- Make F_DUPFD_QUERY associative
- Avoid filename buffer overrun in initramfs
- Don't let statmount() return empty strings
- Add a cond_resched() to dump_user_range() to avoid hogging the CPU
- Don't query the device logical blocksize multiple times for hfsplus
- Make filemap_read() check that the offset is positive or zero
Cleanups:
- Various typo fixes
- Cleanup wbc_attach_fdatawrite_inode()
- Add __releases annotation to wbc_attach_and_unlock_inode()
- Add hugetlbfs tracepoints
- Fix various vfs kernel doc parameters
- Remove obsolete TODO comment from io_cancel()
- Convert wbc_account_cgroup_owner() to take a folio
- Fix comments for BANDWITH_INTERVAL and wb_domain_writeout_add()
- Reorder struct posix_acl to save 8 bytes
- Annotate struct posix_acl with __counted_by()
- Replace one-element array with flexible array member in freevxfs
- Use idiomatic atomic64_inc_return() in alloc_mnt_ns()"
* tag 'vfs-6.13.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
statmount: retrieve security mount options
vfs: make evict() use smp_mb__after_spinlock instead of smp_mb
statmount: add flag to retrieve unescaped options
fs: add the ability for statmount() to report the sb_source
writeback: wbc_attach_fdatawrite_inode out of line
writeback: add a __releases annoation to wbc_attach_and_unlock_inode
fs: add the ability for statmount() to report the fs_subtype
fs: don't let statmount return empty strings
fs:aio: Remove TODO comment suggesting hash or array usage in io_cancel()
hfsplus: don't query the device logical block size multiple times
freevxfs: Replace one-element array with flexible array member
fs: optimize acl_permission_check()
initramfs: avoid filename buffer overrun
fs/writeback: convert wbc_account_cgroup_owner to take a folio
acl: Annotate struct posix_acl with __counted_by()
acl: Realign struct posix_acl to save 8 bytes
epoll: Add synchronous wakeup support for ep_poll_callback
coredump: add cond_resched() to dump_user_range
mm/page-writeback.c: Fix comment of wb_domain_writeout_add()
mm/page-writeback.c: Update comment for BANDWIDTH_INTERVAL
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcTJQAKCRCRxhvAZXjc
orndAP4gmY0BHtvXZoZiArqjvFIn5lELcRCPoXzYTlVlb2IQFQD9Gi3kMv5QUZBj
bKCKNJb1MaXknT/psytR9llWlDTMeQw=
=0/q1
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount api conversions from Christian Brauner:
"Convert adfs, affs, befs, hfs, hfsplus, jfs, and hpfs to the new mount
api"
* tag 'vfs-6.13.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
efs: fix the efs new mount api implementation
ubifs: Convert ubifs to use the new mount API
hpfs: convert hpfs to use the new mount api
jfs: convert jfs to use the new mount api
hfsplus: convert hfsplus to use the new mount api
hfs: convert hfs to use the new mount api
befs: convert befs to use the new mount api
affs: convert affs to use the new mount api
adfs: convert adfs to use the new mount api
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcScQAKCRCRxhvAZXjc
oj+5AP4k822a77wc/3iPFk379naIvQ4dsrgemh0/Pb6ZvzvkFQEAi3vFCfzCDR2x
SkJF/RwXXKZv6U31QXMRt2Qo6wfBuAc=
=nVlm
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs multigrain timestamps from Christian Brauner:
"This is another try at implementing multigrain timestamps. This time
with significant help from the timekeeping maintainers to reduce the
performance impact.
Thomas provided a base branch that contains the required timekeeping
interfaces for the VFS. It serves as the base for the multi-grain
timestamp work:
- Multigrain timestamps allow the kernel to use fine-grained
timestamps when an inode's attributes is being actively observed
via ->getattr(). With this support, it's possible for a file to get
a fine-grained timestamp, and another modified after it to get a
coarse-grained stamp that is earlier than the fine-grained time. If
this happens then the files can appear to have been modified in
reverse order, which breaks VFS ordering guarantees.
To prevent this, a floor value is maintained for multigrain
timestamps. Whenever a fine-grained timestamp is handed out, record
it, and when later coarse-grained stamps are handed out, ensure
they are not earlier than that value. If the coarse-grained
timestamp is earlier than the fine-grained floor, return the floor
value instead.
The timekeeper changes add a static singleton atomic64_t into
timekeeper.c that is used to keep track of the latest fine-grained
time ever handed out. This is tracked as a monotonic ktime_t value
to ensure that it isn't affected by clock jumps. Because it is
updated at different times than the rest of the timekeeper object,
the floor value is managed independently of the timekeeper via a
cmpxchg() operation, and sits on its own cacheline.
Two new public timekeeper interfaces are added:
(1) ktime_get_coarse_real_ts64_mg() fills a timespec64 with the
later of the coarse-grained clock and the floor time
(2) ktime_get_real_ts64_mg() gets the fine-grained clock value,
and tries to swap it into the floor. A timespec64 is filled
with the result.
- The VFS has always used coarse-grained timestamps when updating the
ctime and mtime after a change. This has the benefit of allowing
filesystems to optimize away a lot metadata updates, down to around
1 per jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting
via NFSv3, which relies on timestamps to validate caches. A lot of
changes can happen in a jiffy, so timestamps aren't sufficient to
help the client decide when to invalidate the cache. Even with
NFSv4, a lot of exported filesystems don't properly support a
change attribute and are subject to the same problems with
timestamp granularity. Other applications have similar issues with
timestamps (e.g backup applications).
If we were to always use fine-grained timestamps, that would
improve the situation, but that becomes rather expensive, as the
underlying filesystem would have to log a lot more metadata
updates.
This adds a way to only use fine-grained timestamps when they are
being actively queried. Use the (unused) top bit in
inode->i_ctime_nsec as a flag that indicates whether the current
timestamps have been queried via stat() or the like. When it's set,
we allow the kernel to use a fine-grained timestamp iff it's
necessary to make the ctime show a different value.
This solves the problem of being able to distinguish the timestamp
between updates, but introduces a new problem: it's now possible
for a file being changed to get a fine-grained timestamp. A file
that is altered just a bit later can then get a coarse-grained one
that appears older than the earlier fine-grained time. This
violates timestamp ordering guarantees.
This is where the earlier mentioned timkeeping interfaces help. A
global monotonic atomic64_t value is kept that acts as a timestamp
floor. When we go to stamp a file, we first get the latter of the
current floor value and the current coarse-grained time. If the
inode ctime hasn't been queried then we just attempt to stamp it
with that value.
If it has been queried, then first see whether the current coarse
time is later than the existing ctime. If it is, then we accept
that value. If it isn't, then we get a fine-grained time and try to
swap that into the global floor. Whether that succeeds or fails, we
take the resulting floor time, convert it to realtime and try to
swap that into the ctime.
We take the result of the ctime swap whether it succeeds or fails,
since either is just as valid.
Filesystems can opt into this by setting the FS_MGTIME fstype flag.
Others should be unaffected (other than being subject to the same
floor value as multigrain filesystems)"
* tag 'vfs-6.13.mgtime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce pointer chasing in is_mgtime() test
tmpfs: add support for multigrain timestamps
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
Documentation: add a new file documenting multigrain timestamps
fs: add percpu counters for significant multigrain timestamp events
fs: tracepoints around multigrain timestamp events
fs: handle delegated timestamps in setattr_copy_mgtime
timekeeping: Add percpu counter for tracking floor swap events
timekeeping: Add interfaces for handling timestamps with a floor value
fs: have setattr_copy handle multigrain timestamps appropriately
fs: add infrastructure for multigrain timestamps
Correct spelling here and there as suggested by codespell.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors [1].
This fixes checkpatch warning:
WARNING: Prefer strscpy over strcpy
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
[ idryomov: formatting ]
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Previously, the "name" in the new device syntax "<name>@<fsid>.<fsname>"
was ignored because (presumably) tests were done using mount.ceph which
also passed the entity name using "-o name=foo". If mounting is done
without the mount.ceph helper, the new device id syntax fails to set
the name properly.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/68516
Signed-off-by: Patrick Donnelly <pdonnell@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_caps_revoking() has been unused since 2017's commit
3fb99d483e ("ceph: nuke startsync op")
ceph_mdsc_open_export_target_sessions() has been unused since 2013's
commit 11df2dfb61 ("ceph: add imported caps when handling cap export message")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ensure the superblock is kept alive until we're done with iput().
Holding a reference to an inode is not allowed unless we ensure the
superblock stays alive, which fsnotify does by keeping the
watched_objects count elevated, so iput() must happen before the
watched_objects decrement.
This can lead to a UAF of something like sb->s_fs_info in tmpfs, but the
UAF is hard to hit because race orderings that oops are more likely, thanks
to the CHECK_DATA_CORRUPTION() block in generic_shutdown_super().
Also, ensure that fsnotify_put_sb_watched_objects() doesn't call
fsnotify_sb_watched_objects() on a superblock that may have already been
freed, which would cause a UAF read of sb->s_fsnotify_info.
Cc: stable@kernel.org
Fixes: d2f277e26f ("fsnotify: rename fsnotify_{get,put}_sb_connectors()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
If dlm_recover_members() fails we don't drop the references of the
previous created root_list that holds and keep all rsbs alive during the
recovery. It might be not an unlikely event because ping_members() could
run into an -EINTR if another recovery progress was triggered again.
Fixes: 3a747f4a2e ("dlm: move rsb root_list to ls_recover() stack")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This reverts commit b571cfcb9d.
This patch appears to assume that if one request is complete, then the
others will complete too before unlocking. That is not a valid
assumption, since other requests could hit a non-fatal error or a short
write that would cause them not to complete.
Reported-by: Igor Raits <igor@gooddata.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219508
Fixes: b571cfcb9d ("nfs: don't reuse partially completed requests in nfs_lock_and_join_requests")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When using FUSE DAX with virtiofs, cache coherency is managed by the
host. Disk persistence is handled via fsync() and friends, which are
passed directly via the FUSE layer to the host. Therefore, there's no
need to do dax_writeback_mapping_range(). All that ends up doing is a
cache flush operation, which is not caught by KVM and doesn't do much,
since the host and guest are already cache-coherent.
Since dax_writeback_mapping_range() checks that the inode block size is
equal to PAGE_SIZE, this fixes a spurious WARN when virtiofs is used
with a mismatched guest PAGE_SIZE and virtiofs backing FS block size
(this happens, for example, when it's a tmpfs and the host and guest
have a different PAGE_SIZE). FUSE DAX does not require any particular FS
block size, since it always performs DAX mappings in aligned 2MiB
blocks.
See discussion in [1].
[1] https://lore.kernel.org/lkml/20241101-dax-page-size-v1-1-eedbd0c6b08f@asahilina.net/T/#u
[SzM: remove the empty callback]
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Function fuse_direntplus_link() might call fuse_iget() to initialize a new
fuse_inode and change its attributes. If fi->attr_version is always
initialized with 0, even if the attributes returned by the FUSE_READDIR
request is staled, as the new fi->attr_version is 0, fuse_change_attributes
will still set the staled attributes to inode. This wrong behaviour may
cause file size inconsistency even when there is no changes from
server-side.
To reproduce the issue, consider the following 2 programs (A and B) are
running concurrently,
A B
---------------------------------- --------------------------------
{ /fusemnt/dir/f is a file path in a fuse mount, the size of f is 0. }
readdir(/fusemnt/dir) start
//Daemon set size 0 to f direntry
fallocate(f, 1024)
stat(f) // B see size 1024
echo 2 > /proc/sys/vm/drop_caches
readdir(/fusemnt/dir) reply to kernel
Kernel set 0 to the I_NEW inode
stat(f) // B see size 0
In the above case, only program B is modifying the file size, however, B
observes file size changing between the 2 'readonly' stat() calls. To fix
this issue, we should make sure readdirplus still follows the rule of
attr_version staleness checking even if the fi->attr_version is lost due to
inode eviction.
To identify this situation, the new fc->evict_ctr is used to record whether
the eviction of inodes occurs during the readdirplus request processing.
If it does, the result of readdirplus may be inaccurate; otherwise, the
result of readdirplus can be trusted. Although this may still lead to
incorrect invalidation, considering the relatively low frequency of
evict occurrences, it should be acceptable.
Link: https://lore.kernel.org/lkml/20230711043405.66256-2-zhangjiachen.jaycee@bytedance.com/
Link: https://lore.kernel.org/lkml/20241114070905.48901-1-zhangtianci.1997@bytedance.com/
Reported-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Adjust sb->s_blocksize{,_bits} directly for file-backed
mounts when the fs block size is smaller than PAGE_SIZE.
Previously, EROFS used sb_set_blocksize(), which caused
a panic if bdev-backed mounts is not used.
Fixes: fb17675026 ("erofs: add file-backed mount support")
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241015103836.3757438-1-hongzhen@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
After commit 927e5010ff ("erofs: use kmap_local_page() only for
erofs_bread()"), `buf->kmap_type` actually has no use at all.
Let's get rid of `buf->kmap_type` now.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241114095813.839866-1-hsiangkao@linux.alibaba.com
Add a sysfs node to drop compression-related caches, currently used to
drop in-memory pclusters and cached compressed folios.
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241113041148.749129-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Once a pcluster is fully decompressed and there are no attached cached
folios, its corresponding `struct z_erofs_pcluster` will be freed. This
will significantly reduce the frequency of calls to erofs_shrink_scan()
and the memory allocated for `struct z_erofs_pcluster`.
The tables below show approximately a 96% reduction in the calls to
erofs_shrink_scan() and in the memory allocated for `struct
z_erofs_pcluster` after applying this patch. The results were obtained
by performing a test to copy a 4.1GB partition on ARM64 Android devices
running the 6.6 kernel with an 8-core CPU and 12GB of memory.
1. The reduction in calls to erofs_shrink_scan():
+-----------------+-----------+----------+---------+
| | w/o patch | w/ patch | diff |
+-----------------+-----------+----------+---------+
| Average (times) | 11390 | 390 | -96.57% |
+-----------------+-----------+----------+---------+
2. The reduction in memory released by erofs_shrink_scan():
+-----------------+-----------+----------+---------+
| | w/o patch | w/ patch | diff |
+-----------------+-----------+----------+---------+
| Average (Byte) | 133612656 | 4434552 | -96.68% |
+-----------------+-----------+----------+---------+
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241112043235.546164-1-guochunhai@vivo.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
`struct erofs_workgroup` was introduced to provide a unique header
for all physically indexed objects. However, after big pclusters and
shared pclusters are implemented upstream, it seems that all EROFS
encoded data (which requires transformation) can be represented with
`struct z_erofs_pcluster` directly.
Move all members into `struct z_erofs_pcluster` for simplicity.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241021035323.3280682-3-hsiangkao@linux.alibaba.com
Customers have reported use-after-free in @ses->auth_key.response with
SMB2.1 + sign mounts which occurs due to following race:
task A task B
cifs_mount()
dfs_mount_share()
get_session()
cifs_mount_get_session() cifs_send_recv()
cifs_get_smb_ses() compound_send_recv()
cifs_setup_session() smb2_setup_request()
kfree_sensitive() smb2_calc_signature()
crypto_shash_setkey() *UAF*
Fix this by ensuring that we have a valid @ses->auth_key.response by
checking whether @ses->ses_status is SES_GOOD or SES_EXITING with
@ses->ses_lock held. After commit 24a9799aa8 ("smb: client: fix UAF
in smb2_reconnect_server()"), we made sure to call ->logoff() only
when @ses was known to be good (e.g. valid ->auth_key.response), so
it's safe to access signing key when @ses->ses_status == SES_EXITING.
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steve French <stfrench@microsoft.com>
Like commit f1f047bd7c ("smb: client: Fix -Wstringop-overflow issues"),
adjust the memcpy() destination address to be based off the surrounding
object rather than based off the 4-byte "Protocol" member. This avoids a
build-time warning when compiling under CONFIG_FORTIFY_SOURCE with GCC 15:
In function 'fortify_memcpy_chk',
inlined from 'CIFSSMBSetPathInfo' at ../fs/smb/client/cifssmb.c:5358:2:
../include/linux/fortify-string.h:571:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
571 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
CIFSSMBCopy() is unused, remove it.
It seems to have been that way pre-git; looking in a historic
archive, I think it landed around May 2004 in Linus'
BKrev: 40ab7591J_OgkpHW-qhzZukvAUAw9g
and was unused back then.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzkr6AAKCRDdBJ7gKXxA
jsb2AP9HCOI4w9rQTmBdnaefXytS7fiiPq+LVNpjJ0NGXX2FSgD/e1NM0wi8KevQ
npcvlqTcXtRSJvYNF904aTNyDn+Kuw0=
=KFGY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"10 hotfixes, 7 of which are cc:stable. All singletons, please see the
changelogs for details"
* tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: revert "mm: shmem: fix data-race in shmem_getattr()"
ocfs2: uncache inode which has failed entering the group
mm: fix NULL pointer dereference in alloc_pages_bulk_noprof
mm, doc: update read_ahead_kb for MADV_HUGEPAGE
fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args()
sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers
crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32
mm/mremap: fix address wraparound in move_page_tables()
tools/mm: fix compile error
mm, swap: fix allocation and scanning race with swapoff
