mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-01 02:36:02 +00:00
d67393f4d2
3718 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Hou Tao
|
6a5c63d43c |
bpf: Use raw_spinlock_t for LPM trie
After switching from kmalloc() to the bpf memory allocator, there will be no blocking operation during the update of LPM trie. Therefore, change trie->lock from spinlock_t to raw_spinlock_t to make LPM trie usable in atomic context, even on RT kernels. The max value of prefixlen is 2048. Therefore, update or deletion operations will find the target after at most 2048 comparisons. Constructing a test case which updates an element after 2048 comparisons under a 8 CPU VM, and the average time and the maximal time for such update operation is about 210us and 900us. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241206110622.1161752-8-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Hou Tao
|
3d8dc43eb2 |
bpf: Switch to bpf mem allocator for LPM trie
Multiple syzbot warnings have been reported. These warnings are mainly about the lock order between trie->lock and kmalloc()'s internal lock. See report [1] as an example: ====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc7-syzkaller-00003-g4376e966ecb7 #0 Not tainted ------------------------------------------------------ syz.3.2069/15008 is trying to acquire lock: ffff88801544e6d8 (&n->list_lock){-.-.}-{2:2}, at: get_partial_node ... but task is already holding lock: ffff88802dcc89f8 (&trie->lock){-.-.}-{2:2}, at: trie_update_elem ... which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&trie->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3a/0x60 trie_delete_elem+0xb0/0x820 ___bpf_prog_run+0x3e51/0xabd0 __bpf_prog_run32+0xc1/0x100 bpf_dispatcher_nop_func ...... bpf_trace_run2+0x231/0x590 __bpf_trace_contention_end+0xca/0x110 trace_contention_end.constprop.0+0xea/0x170 __pv_queued_spin_lock_slowpath+0x28e/0xcc0 pv_queued_spin_lock_slowpath queued_spin_lock_slowpath queued_spin_lock do_raw_spin_lock+0x210/0x2c0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x42/0x60 __put_partials+0xc3/0x170 qlink_free qlist_free_all+0x4e/0x140 kasan_quarantine_reduce+0x192/0x1e0 __kasan_slab_alloc+0x69/0x90 kasan_slab_alloc slab_post_alloc_hook slab_alloc_node kmem_cache_alloc_node_noprof+0x153/0x310 __alloc_skb+0x2b1/0x380 ...... -> #0 (&n->list_lock){-.-.}-{2:2}: check_prev_add check_prevs_add validate_chain __lock_acquire+0x2478/0x3b30 lock_acquire lock_acquire+0x1b1/0x560 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3a/0x60 get_partial_node.part.0+0x20/0x350 get_partial_node get_partial ___slab_alloc+0x65b/0x1870 __slab_alloc.constprop.0+0x56/0xb0 __slab_alloc_node slab_alloc_node __do_kmalloc_node __kmalloc_node_noprof+0x35c/0x440 kmalloc_node_noprof bpf_map_kmalloc_node+0x98/0x4a0 lpm_trie_node_alloc trie_update_elem+0x1ef/0xe00 bpf_map_update_value+0x2c1/0x6c0 map_update_elem+0x623/0x910 __sys_bpf+0x90c/0x49a0 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&trie->lock); lock(&n->list_lock); lock(&trie->lock); lock(&n->list_lock); *** DEADLOCK *** [1]: https://syzkaller.appspot.com/bug?extid=9045c0a3d5a7f1b119f7 A bpf program attached to trace_contention_end() triggers after acquiring &n->list_lock. The program invokes trie_delete_elem(), which then acquires trie->lock. However, it is possible that another process is invoking trie_update_elem(). trie_update_elem() will acquire trie->lock first, then invoke kmalloc_node(). kmalloc_node() may invoke get_partial_node() and try to acquire &n->list_lock (not necessarily the same lock object). Therefore, lockdep warns about the circular locking dependency. Invoking kmalloc() before acquiring trie->lock could fix the warning. However, since BPF programs call be invoked from any context (e.g., through kprobe/tracepoint/fentry), there may still be lock ordering problems for internal locks in kmalloc() or trie->lock itself. To eliminate these potential lock ordering problems with kmalloc()'s internal locks, replacing kmalloc()/kfree()/kfree_rcu() with equivalent BPF memory allocator APIs that can be invoked in any context. The lock ordering problems with trie->lock (e.g., reentrance) will be handled separately. Three aspects of this change require explanation: 1. Intermediate and leaf nodes are allocated from the same allocator. Since the value size of LPM trie is usually small, using a single alocator reduces the memory overhead of the BPF memory allocator. 2. Leaf nodes are allocated before disabling IRQs. This handles cases where leaf_size is large (e.g., > 4KB - 8) and updates require intermediate node allocation. If leaf nodes were allocated in IRQ-disabled region, the free objects in BPF memory allocator would not be refilled timely and the intermediate node allocation may fail. 3. Paired migrate_{disable|enable}() calls for node alloc and free. The BPF memory allocator uses per-CPU struct internally, these paired calls are necessary to guarantee correctness. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241206110622.1161752-7-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Hou Tao
|
27abc7b3fa |
bpf: Fix exact match conditions in trie_get_next_key()
trie_get_next_key() uses node->prefixlen == key->prefixlen to identify
an exact match, However, it is incorrect because when the target key
doesn't fully match the found node (e.g., node->prefixlen != matchlen),
these two nodes may also have the same prefixlen. It will return
expected result when the passed key exist in the trie. However when a
recently-deleted key or nonexistent key is passed to
trie_get_next_key(), it may skip keys and return incorrect result.
Fix it by using node->prefixlen == matchlen to identify exact matches.
When the condition is true after the search, it also implies
node->prefixlen equals key->prefixlen, otherwise, the search would
return NULL instead.
Fixes:
|
||
|
Hou Tao
|
532d6b36b2 |
bpf: Handle in-place update for full LPM trie correctly
When a LPM trie is full, in-place updates of existing elements
incorrectly return -ENOSPC.
Fix this by deferring the check of trie->n_entries. For new insertions,
n_entries must not exceed max_entries. However, in-place updates are
allowed even when the trie is full.
Fixes:
|
||
|
Hou Tao
|
eae6a075e9 |
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
Add the currently missing handling for the BPF_EXIST and BPF_NOEXIST
flags. These flags can be specified by users and are relevant since LPM
trie supports exact matches during update.
Fixes:
|
||
|
Hou Tao
|
3d5611b4d7 |
bpf: Remove unnecessary kfree(im_node) in lpm_trie_update_elem
There is no need to call kfree(im_node) when updating element fails, because im_node must be NULL. Remove the unnecessary kfree() for im_node. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241206110622.1161752-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Hou Tao
|
156c977c53 |
bpf: Remove unnecessary check when updating LPM trie
When "node->prefixlen == matchlen" is true, it means that the node is fully matched. If "node->prefixlen == key->prefixlen" is false, it means the prefix length of key is greater than the prefix length of node, otherwise, matchlen will not be equal with node->prefixlen. However, it also implies that the prefix length of node must be less than max_prefixlen. Therefore, "node->prefixlen == trie->max_prefixlen" will always be false when the check of "node->prefixlen == key->prefixlen" returns false. Remove this unnecessary comparison. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241206110622.1161752-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Tao Lyu
|
b0e66977dc |
bpf: Fix narrow scalar spill onto 64-bit spilled scalar slots
When CAP_PERFMON and CAP_SYS_ADMIN (allow_ptr_leaks) are disabled, the
verifier aims to reject partial overwrite on an 8-byte stack slot that
contains a spilled pointer.
However, in such a scenario, it rejects all partial stack overwrites as
long as the targeted stack slot is a spilled register, because it does
not check if the stack slot is a spilled pointer.
Incomplete checks will result in the rejection of valid programs, which
spill narrower scalar values onto scalar slots, as shown below.
0: R1=ctx() R10=fp0
; asm volatile ( @ repro.bpf.c:679
0: (7a) *(u64 *)(r10 -8) = 1 ; R10=fp0 fp-8_w=1
1: (62) *(u32 *)(r10 -8) = 1
attempt to corrupt spilled pointer on stack
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0.
Fix this by expanding the check to not consider spilled scalar registers
when rejecting the write into the stack.
Previous discussion on this patch is at link [0].
[0]: https://lore.kernel.org/bpf/20240403202409.2615469-1-tao.lyu@epfl.ch
Fixes:
|
||
|
Kumar Kartikeya Dwivedi
|
69772f509e |
bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_misc
Inside mark_stack_slot_misc, we should not upgrade STACK_INVALID to
STACK_MISC when allow_ptr_leaks is false, since invalid contents
shouldn't be read unless the program has the relevant capabilities.
The relaxation only makes sense when env->allow_ptr_leaks is true.
However, such conversion in privileged mode becomes unnecessary, as
invalid slots can be read without being upgraded to STACK_MISC.
Currently, the condition is inverted (i.e. checking for true instead of
false), simply remove it to restore correct behavior.
Fixes:
|
||
|
Kumar Kartikeya Dwivedi
|
bd74e238ae |
bpf: Zero index arg error string for dynptr and iter
Andrii spotted that process_dynptr_func's rejection of incorrect argument register type will print an error string where argument numbers are not zero-indexed, unlike elsewhere in the verifier. Fix this by subtracting 1 from regno. The same scenario exists for iterator messages. Fix selftest error strings that match on the exact argument number while we're at it to ensure clean bisection. Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241203002235.3776418-1-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Tao Lyu
|
12659d2861 |
bpf: Ensure reg is PTR_TO_STACK in process_iter_arg
Currently, KF_ARG_PTR_TO_ITER handling missed checking the reg->type and
ensuring it is PTR_TO_STACK. Instead of enforcing this in the caller of
process_iter_arg, move the check into it instead so that all callers
will gain the check by default. This is similar to process_dynptr_func.
An existing selftest in verifier_bits_iter.c fails due to this change,
but it's because it was passing a NULL pointer into iter_next helper and
getting an error further down the checks, but probably meant to pass an
uninitialized iterator on the stack (as is done in the subsequent test
below it). We will gain coverage for non-PTR_TO_STACK arguments in later
patches hence just change the declaration to zero-ed stack object.
Fixes:
|
||
|
Maciej Fijalkowski
|
ab244dd7cf |
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the
index used for accessing map entry, due to being a signed integer,
causes the OOB writes. Fix is simple as changing the type from int to
u32, however, when compared to XSKMAP case, one more thing needs to be
addressed.
When map is released from system via dev_map_free(), we iterate through
all of the entries and an iterator variable is also an int, which
implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000
[ 160.731662] #PF: supervisor read access in kernel mode
[ 160.736876] #PF: error_code(0x0000) - not-present page
[ 160.742095] PGD 0 P4D 0
[ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP
[ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487
[ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 160.767642] Workqueue: events_unbound bpf_map_free_deferred
[ 160.773308] RIP: 0010:dev_map_free+0x77/0x170
[ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff
[ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202
[ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024
[ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000
[ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001
[ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122
[ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000
[ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000
[ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0
[ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 160.874092] PKRU: 55555554
[ 160.876847] Call Trace:
[ 160.879338] <TASK>
[ 160.881477] ? __die+0x20/0x60
[ 160.884586] ? page_fault_oops+0x15a/0x450
[ 160.888746] ? search_extable+0x22/0x30
[ 160.892647] ? search_bpf_extables+0x5f/0x80
[ 160.896988] ? exc_page_fault+0xa9/0x140
[ 160.900973] ? asm_exc_page_fault+0x22/0x30
[ 160.905232] ? dev_map_free+0x77/0x170
[ 160.909043] ? dev_map_free+0x58/0x170
[ 160.912857] bpf_map_free_deferred+0x51/0x90
[ 160.917196] process_one_work+0x142/0x370
[ 160.921272] worker_thread+0x29e/0x3b0
[ 160.925082] ? rescuer_thread+0x4b0/0x4b0
[ 160.929157] kthread+0xd4/0x110
[ 160.932355] ? kthread_park+0x80/0x80
[ 160.936079] ret_from_fork+0x2d/0x50
[ 160.943396] ? kthread_park+0x80/0x80
[ 160.950803] ret_from_fork_asm+0x11/0x20
[ 160.958482] </TASK>
Fixes:
|
||
|
Thomas Weißschuh
|
8618f5ffba |
bpf, lsm: Remove getlsmprop hooks BTF IDs
These hooks are not useful for BPF LSM currently.
Furthermore a recent renaming introduced build warnings:
BTFIDS vmlinux
WARN: resolve_btfids: unresolved symbol bpf_lsm_task_getsecid_obj
WARN: resolve_btfids: unresolved symbol bpf_lsm_current_getsecid_subj
Link: https://lore.kernel.org/lkml/20241123-bpf_lsm_task_getsecid_obj-v1-1-0d0f94649e05@weissschuh.net/
Fixes:
|
||
|
Linus Torvalds
|
980f8f8fd4 |
Summary
* sysctl ctl_table constification
Constifying ctl_table structs prevents the modification of proc_handler
function pointers. All ctl_table struct arguments are const qualified in the
sysctl API in such a way that the ctl_table arrays being defined elsewhere
and passed through sysctl can be constified one-by-one. We kick the
constification off by qualifying user_table in kernel/ucount.c and expect all
the ctl_tables to be constified in the coming releases.
* Misc fixes
Adjust comments in two places to better reflect the code. Remove superfluous
dput calls. Remove Luis from sysctl maintainership. Replace comments about
holding a lock with calls to lockdep_assert_held.
* Testing
All these went through 0-day and they have all been in linux-next for at
least 1 month (since Oct-24). I also rand these through the sysctl selftest
for x86_64.
-----BEGIN PGP SIGNATURE-----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=bOJ0
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
"sysctl ctl_table constification:
- Constifying ctl_table structs prevents the modification of
proc_handler function pointers. All ctl_table struct arguments are
const qualified in the sysctl API in such a way that the ctl_table
arrays being defined elsewhere and passed through sysctl can be
constified one-by-one.
We kick the constification off by qualifying user_table in
kernel/ucount.c and expect all the ctl_tables to be constified in
the coming releases.
Misc fixes:
- Adjust comments in two places to better reflect the code
- Remove superfluous dput calls
- Remove Luis from sysctl maintainership
- Replace comments about holding a lock with calls to
lockdep_assert_held"
* tag 'sysctl-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Reduce dput(child) calls in proc_sys_fill_cache()
sysctl: Reorganize kerneldoc parameter names
ucounts: constify sysctl table user_table
sysctl: update comments to new registration APIs
MAINTAINERS: remove me from sysctl
sysctl: Convert locking comments to lockdep assertions
const_structs.checkpatch: add ctl_table
sysctl: make internal ctl_tables const
sysctl: allow registration of const struct ctl_table
sysctl: move internal interfaces to const struct ctl_table
bpf: Constify ctl_table argument of filter function
|
||
|
Linus Torvalds
|
06afb0f361 |
tracing updates for v6.13:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit. This
location is known to allow page faults. The tracepoints are called under
an rcu_read_lock() which does not allow faults that can sleep. This limits
the ability of tracepoint handlers to page fault in user space system call
parameters. Now these tracepoints have been made "faultable", allowing the
callbacks to fault in user space parameters and record them.
Note, only the infrastructure has been implemented. The consumers (perf,
ftrace, BPF) now need to have their code modified to allow faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph tracer
is also running.
When function_graph trace is running along with function tracer,
the parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack function
filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZz6dehQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlQsAP9aB0XGUV3UykvjZuKK84VDZ26a2hZH
X2JDYsNA4luuPAEAz/BG2rnslfMZ04WTMAl8h1eh10lxcuHG0wQMHVBXIwI=
=lzb5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Addition of faultable tracepoints
There's a tracepoint attached to both a system call entry and exit.
This location is known to allow page faults. The tracepoints are
called under an rcu_read_lock() which does not allow faults that can
sleep. This limits the ability of tracepoint handlers to page fault
in user space system call parameters. Now these tracepoints have been
made "faultable", allowing the callbacks to fault in user space
parameters and record them.
Note, only the infrastructure has been implemented. The consumers
(perf, ftrace, BPF) now need to have their code modified to allow
faults.
- Fix up of BPF code for the tracepoint faultable logic
- Update tracepoints to use the new static branch API
- Remove trace_*_rcuidle() variants and the SRCU protection they used
- Remove unused TRACE_EVENT_FL_FILTERED logic
- Replace strncpy() with strscpy() and memcpy()
- Use replace per_cpu_ptr(smp_processor_id()) with this_cpu_ptr()
- Fix perf events to not duplicate samples when tracing is enabled
- Replace atomic64_add_return(1, counter) with
atomic64_inc_return(counter)
- Make stack trace buffer 4K instead of PAGE_SIZE
- Remove TRACE_FLAG_IRQS_NOSUPPORT flag as it was never used
- Get the true return address for function tracer when function graph
tracer is also running.
When function_graph trace is running along with function tracer, the
parent function of the function tracer sometimes is
"return_to_handler", which is the function graph trampoline to record
the exit of the function. Use existing logic that calls into the
fgraph infrastructure to find the real return address.
- Remove (un)regfunc pointers out of tracepoint structure
- Added last minute bug fix for setting pending modules in stack
function filter.
echo "write*:mod:ext3" > /sys/kernel/tracing/stack_trace_filter
Would cause a kernel NULL dereference.
- Minor clean ups
* tag 'trace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
ftrace: Fix regression with module command in stack_trace_filter
tracing: Fix function name for trampoline
ftrace: Get the true parent ip for function tracer
tracing: Remove redundant check on field->field in histograms
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
bpf: put bpf_link's program when link is safe to be deallocated
tracing: Replace strncpy() with strscpy() when copying comm
tracing: Add might_fault() check in __DECLARE_TRACE_SYSCALL
tracing: Fix syscall tracepoint use-after-free
tracing: Introduce tracepoint_is_faultable()
tracing: Introduce tracepoint extended structure
tracing: Remove TRACE_FLAG_IRQS_NOSUPPORT
tracing: Replace multiple deprecated strncpy with memcpy
tracing: Make percpu stack trace buffer invariant to PAGE_SIZE
tracing: Use atomic64_inc_return() in trace_clock_counter()
trace/trace_event_perf: remove duplicate samples on the first tracepoint event
tracing/bpf: Add might_fault check to syscall probes
tracing/perf: Add might_fault check to syscall probes
tracing/ftrace: Add might_fault check to syscall probes
...
|
||
|
Linus Torvalds
|
6e95ef0258 |
bpf-next-bpf-next-6.13
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmc7hIQACgkQ6rmadz2v bTrcRA/+MsUOzJPnjokonHwk8X4KQM21gOua/sUcGArLVGF/JoW5/b1W8UBQ0y5+ +okYaRNGpwF0/2S8M5FAYpM7VSPLl1U7Rihr55I63D9kbAo0pDQwpn4afQFuZhaC l7MzkhBHS7XXx5/70APOzy3kz1GDYvz39jiWuAAhRqVejFO+fa4pDz4W+Ht7jYTQ jJOLn4vJna9fSfVf/U/bbdz5lL0lncIiEnRIEbF7EszbF2CA7sa+/KFENGM7ChEo UlxK2Xz5fpzgT6htZRjMr6jmupfg7gzdT4moOysQQcjkllvv6/4MD0s/GLShtG9H SmpaptpYCEGXLuApGzkSddwiT6iUMTqQr7zs6LPp0gPh+4Z0sSPNoBtBp2v0aVDl w0zhVhMfoF66rMG+IZY684CsMGg5h8UsOS46KLjSU0fW2HpGM7+zZLpXOaGkU3OH UV0womPT/C2kS2fpOn9F91O8qMjOZ4EXd+zuRtIRv9CeuVIpCT9R13lEYn+wfr6d aUci8wybha1UOAvkRiXiqWOPS+0Z/arrSbCSDMQF6DevLpQl0noVbTVssWXcRdUE 9Ve6J0yS29WxNWFtuuw4xP5NcG1AnRXVGh215TuVBX7xK9X/hnDDhfalltsjXfnd m1f64FxU2SGp2D7X8BX/6Aeyo6mITE6I3SNMUrcvk1Zid36zhy8= =TXGS -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Add BPF uprobe session support (Jiri Olsa) - Optimize uprobe performance (Andrii Nakryiko) - Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman) - Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao) - Prevent tailcall infinite loop caused by freplace (Leon Hwang) - Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi) - Introduce uptr support in the task local storage map (Martin KaFai Lau) - Stringify errno log messages in libbpf (Mykyta Yatsenko) - Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim) - Support BPF objects of either endianness in libbpf (Tony Ambardar) - Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai) - Introduce private stack for eligible BPF programs (Yonghong Song) - Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee) - Migrate test_sock to selftests/bpf test_progs (Jordan Rife) * tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits) libbpf: Change hash_combine parameters from long to unsigned long selftests/bpf: Fix build error with llvm 19 libbpf: Fix memory leak in bpf_program__attach_uprobe_multi bpf: use common instruction history across all states bpf: Add necessary migrate_disable to range_tree. bpf: Do not alloc arena on unsupported arches selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar selftests/bpf: Add a test for arena range tree algorithm bpf: Introduce range_tree data structure and use it in bpf arena samples/bpf: Remove unused variable in xdp2skb_meta_kern.c samples/bpf: Remove unused variables in tc_l2_redirect_kern.c bpftool: Cast variable `var` to long long bpf, x86: Propagate tailcall info only for subprogs bpf: Add kernel symbol for struct_ops trampoline bpf: Use function pointers count as struct_ops links count bpf: Remove unused member rcu from bpf_struct_ops_map selftests/bpf: Add struct_ops prog private stack tests bpf: Support private stack for struct_ops progs selftests/bpf: Add tracing prog private stack tests bpf, x86: Support private stack in jit ... |
||
|
Linus Torvalds
|
8a7fa81137 |
Random number generator updates for Linux 6.13-rc1.
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmc6oE0ACgkQSfxwEqXe A65n5BAAtNmfBJhYRiC6Svsg7+ktHmhCAHoHwnP7sv+bjs81FRAEv21CsfI+02Nb zUvaPuyiLtYzlWxzE5Yg44v1cADHAq+QZE1Fg5yl7ge6zPZ3+S1pv/8suNSyyI2M PKvh1sb4OkUtqplveYSuP1J87u55zAtV9mP9qC3hSlY3XkeQUObt9Awss8peOMdv sH2AxwBlRkqFXpY2worxlfg3p5iLemb3AUZ3f0Jc6fRmOagSJCt7i4mDrWo3EXke 90Ao8ypY0x3YVGRFACHnxCS53X20HGwLxm7jdicfriMCzAJ6JQR6asO+NYnXR+Ev 9Za3UquVHP6HbQGWj6d1k5k2nF+IbkTHTgFBPRK/CY9ZpVbP04B2K7tE1gmT81wj AscRGi9RBVBPKAUguyi99MXYlprFG/ZTLOux3hvdarv5u0bP94eXmy1FrRM+IO0r u4BiQ39FlkDdtRxjzKfCiKkMrf3NmFEciZJhxCnflzmOBaj64r1hRt/ea8Bjxvp3 a4k0MfULmcEn2JwPiT1/Swz45ypZQc4OgbP87SCU8P0a23r21r2oK+9v3No/rCzB TI0fP6ykDTFQoiKUOSg1mJmkipdjeDyQ9E+0XIDsKd+T8Yv9rFoaV6RWoMrkt4AJ Yea9+V+XEI8F3SjhdD4OL/s3/+bjTjnRHDaXnJf2XzGmXcuvnbs= =o4ww -----END PGP SIGNATURE----- Merge tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: "This contains a single series from Uros to replace uses of <linux/random.h> with prandom.h or other more specific headers as needed, in order to avoid a circular header issue. Uros' goal is to be able to use percpu.h from prandom.h, which will then allow him to define __percpu in percpu.h rather than in compiler_types.h" * tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: Include <linux/percpu.h> in <linux/prandom.h> random: Do not include <linux/prandom.h> in <linux/random.h> netem: Include <linux/prandom.h> in sch_netem.c lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h> lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h> bpf/tests: Include <linux/prandom.h> instead of <linux/random.h> lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h> random32: Include <linux/prandom.h> instead of <linux/random.h> kunit: string-stream-test: Include <linux/prandom.h> lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h> bpf: Include <linux/prandom.h> instead of <linux/random.h> scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h> fscrypt: Include <linux/once.h> in fs/crypto/keyring.c mtd: tests: Include <linux/prandom.h> instead of <linux/random.h> media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c drm/lib: Include <linux/prandom.h> instead of <linux/random.h> drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h> crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h> x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h> |
||
|
Linus Torvalds
|
4c797b11a8 |
vfs-6.13.file
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZzcW4gAKCRCRxhvAZXjc
okF+AP9xTMb2SlnRPBOBd9yFcmVXmQi86TSCUPAEVb+wIldGYwD/RIOdvXYJlp9v
RgJkU1DC3ddkXtONNDY6gFaP+siIWA0=
=gMc7
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
|
||
|
Andrii Nakryiko
|
96a30e469c |
bpf: use common instruction history across all states
Instead of allocating and copying instruction history each time we enqueue child verifier state, switch to a model where we use one common dynamically sized array of instruction history entries across all states. The key observation for proving this is correct is that instruction history is only relevant while state is active, which means it either is a current state (and thus we are actively modifying instruction history and no other state can interfere with us) or we are checkpointed state with some children still active (either enqueued or being current). In the latter case our portion of instruction history is finalized and won't change or grow, so as long as we keep it immutable until the state is finalized, we are good. Now, when state is finalized and is put into state hash for potentially future pruning lookups, instruction history is not used anymore. This is because instruction history is only used by precision marking logic, and we never modify precision markings for finalized states. So, instead of each state having its own small instruction history, we keep a global dynamically-sized instruction history, where each state in current DFS path from root to active state remembers its portion of instruction history. Current state can append to this history, but cannot modify any of its parent histories. Async callback state enqueueing, while logically detached from parent state, still is part of verification backtracking tree, so has to follow the same schema as normal state checkpoints. Because the insn_hist array can be grown through realloc, states don't keep pointers, they instead maintain two indices, [start, end), into global instruction history array. End is exclusive index, so `start == end` means there is no relevant instruction history. This eliminates a lot of allocations and minimizes overall memory usage. For instance, running a worst-case test from [0] (but without the heuristics-based fix [1]), it took 12.5 minutes until we get -ENOMEM. With the changes in this patch the whole test succeeds in 10 minutes (very slow, so heuristics from [1] is important, of course). To further validate correctness, veristat-based comparison was performed for Meta production BPF objects and BPF selftests objects. In both cases there were no differences *at all* in terms of verdict or instruction and state counts, providing a good confidence in the change. Having this low-memory-overhead solution of keeping dynamic per-instruction history cheaply opens up some new possibilities, like keeping extra information for literally every single validated instruction. This will be used for simplifying precision backpropagation logic in follow up patches. [0] https://lore.kernel.org/bpf/20241029172641.1042523-2-eddyz87@gmail.com/ [1] https://lore.kernel.org/bpf/20241029172641.1042523-1-eddyz87@gmail.com/ Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20241115001303.277272-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yonghong Song
|
4ff04abf9d |
bpf: Add necessary migrate_disable to range_tree.
When running bpf selftest (./test_progs -j), the following warnings
showed up:
$ ./test_progs -t arena_atomics
...
BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u19:0/12501
caller is bpf_mem_free+0x128/0x330
...
Call Trace:
<TASK>
dump_stack_lvl
check_preemption_disabled
bpf_mem_free
range_tree_destroy
arena_map_free
bpf_map_free_deferred
process_scheduled_works
...
For selftests arena_htab and arena_list, similar smp_process_id() BUGs are
dumped, and the following are two stack trace:
<TASK>
dump_stack_lvl
check_preemption_disabled
bpf_mem_alloc
range_tree_set
arena_map_alloc
map_create
...
<TASK>
dump_stack_lvl
check_preemption_disabled
bpf_mem_alloc
range_tree_clear
arena_vm_fault
do_pte_missing
handle_mm_fault
do_user_addr_fault
...
Add migrate_{disable,enable}() around related bpf_mem_{alloc,free}()
calls to fix the issue.
Fixes:
|
||
|
Viktor Malik
|
ab4dc30c53 |
bpf: Do not alloc arena on unsupported arches
Do not allocate BPF arena on arches that do not support it, instead return EOPNOTSUPP. This is useful to prevent bugs such as soft lockups while trying to free the arena which we have witnessed on ppc64le [1]. [1] https://lore.kernel.org/bpf/4afdcb50-13f2-4772-8db1-3fd02bd985b3@redhat.com/ Signed-off-by: Viktor Malik <vmalik@redhat.com> Link: https://lore.kernel.org/r/20241115082548.74972-1-vmalik@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Alexei Starovoitov
|
b795379757 |
bpf: Introduce range_tree data structure and use it in bpf arena
Introduce range_tree data structure and use it in bpf arena to track ranges of allocated pages. range_tree is a large bitmap that is implemented as interval tree plus rbtree. The contiguous sequence of bits represents unallocated pages. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/20241108025616.17625-2-alexei.starovoitov@gmail.com |
||
|
Alexei Starovoitov
|
8714381703 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Cross-merge bpf fixes after downstream PR. In particular to bring the fix in commit |
||
|
Xu Kuohai
|
7c8ce4ffb6 |
bpf: Add kernel symbol for struct_ops trampoline
Without kernel symbols for struct_ops trampoline, the unwinder may
produce unexpected stacktraces.
For example, the x86 ORC and FP unwinders check if an IP is in kernel
text by verifying the presence of the IP's kernel symbol. When a
struct_ops trampoline address is encountered, the unwinder stops due
to the absence of symbol, resulting in an incomplete stacktrace that
consists only of direct and indirect child functions called from the
trampoline.
The arm64 unwinder is another example. While the arm64 unwinder can
proceed across a struct_ops trampoline address, the corresponding
symbol name is displayed as "unknown", which is confusing.
Thus, add kernel symbol for struct_ops trampoline. The name is
bpf__<struct_ops_name>_<member_name>, where <struct_ops_name> is the
type name of the struct_ops, and <member_name> is the name of
the member that the trampoline is linked to.
Below is a comparison of stacktraces captured on x86 by perf record,
before and after this patch.
Before:
ffffffff8116545d __lock_acquire+0xad ([kernel.kallsyms])
ffffffff81167fcc lock_acquire+0xcc ([kernel.kallsyms])
ffffffff813088f4 __bpf_prog_enter+0x34 ([kernel.kallsyms])
After:
ffffffff811656bd __lock_acquire+0x30d ([kernel.kallsyms])
ffffffff81167fcc lock_acquire+0xcc ([kernel.kallsyms])
ffffffff81309024 __bpf_prog_enter+0x34 ([kernel.kallsyms])
ffffffffc000d7e9 bpf__tcp_congestion_ops_cong_avoid+0x3e ([kernel.kallsyms])
ffffffff81f250a5 tcp_ack+0x10d5 ([kernel.kallsyms])
ffffffff81f27c66 tcp_rcv_established+0x3b6 ([kernel.kallsyms])
ffffffff81f3ad03 tcp_v4_do_rcv+0x193 ([kernel.kallsyms])
ffffffff81d65a18 __release_sock+0xd8 ([kernel.kallsyms])
ffffffff81d65af4 release_sock+0x34 ([kernel.kallsyms])
ffffffff81f15c4b tcp_sendmsg+0x3b ([kernel.kallsyms])
ffffffff81f663d7 inet_sendmsg+0x47 ([kernel.kallsyms])
ffffffff81d5ab40 sock_write_iter+0x160 ([kernel.kallsyms])
ffffffff8149c67b vfs_write+0x3fb ([kernel.kallsyms])
ffffffff8149caf6 ksys_write+0xc6 ([kernel.kallsyms])
ffffffff8149cb5d __x64_sys_write+0x1d ([kernel.kallsyms])
ffffffff81009200 x64_sys_call+0x1d30 ([kernel.kallsyms])
ffffffff82232d28 do_syscall_64+0x68 ([kernel.kallsyms])
ffffffff8240012f entry_SYSCALL_64_after_hwframe+0x76 ([kernel.kallsyms])
Fixes:
|
||
|
Xu Kuohai
|
821a3fa32b |
bpf: Use function pointers count as struct_ops links count
Only function pointers in a struct_ops structure can be linked to bpf progs, so set the links count to the function pointers count, instead of the total members count in the structure. Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Link: https://lore.kernel.org/r/20241112145849.3436772-3-xukuohai@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Xu Kuohai
|
bd9d9b48eb |
bpf: Remove unused member rcu from bpf_struct_ops_map
The rcu member in bpf_struct_ops_map is not used after commit
|
||
|
Yonghong Song
|
5bd36da1e3 |
bpf: Support private stack for struct_ops progs
For struct_ops progs, whether a particular prog uses private stack depends on prog->aux->priv_stack_requested setting before actual insn-level verification for that prog. One particular implementation is to piggyback on struct_ops->check_member(). The next patch has an example for this. The struct_ops->check_member() sets prog->aux->priv_stack_requested to be true which enables private stack usage. The struct_ops prog follows the same rule as kprobe/tracing progs after function bpf_enable_priv_stack(). For example, even a struct_ops prog requests private stack, it could still use normal kernel stack if the stack size is small (< 64 bytes). Similar to tracing progs, nested same cpu same prog run will be skipped. A field (recursion_detected()) is added to bpf_prog_aux structure. If bpf_prog->aux->recursion_detected is implemented by the struct_ops subsystem and nested same cpu/prog happens, the function will be triggered to report an error, collect related info, etc. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20241112163933.2224962-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yonghong Song
|
e00931c025 |
bpf: Enable private stack for eligible subprogs
If private stack is used by any subprog, set that subprog prog->aux->jits_use_priv_stack to be true so later jit can allocate private stack for that subprog properly. Also set env->prog->aux->jits_use_priv_stack to be true if any subprog uses private stack. This is a use case for a single main prog (no subprogs) to use private stack, and also a use case for later struct-ops progs where env->prog->aux->jits_use_priv_stack will enable recursion check if any subprog uses private stack. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20241112163912.2224007-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Yonghong Song
|
a76ab5731e |
bpf: Find eligible subprogs for private stack support
Private stack will be allocated with percpu allocator in jit time. To avoid complexity at runtime, only one copy of private stack is available per cpu per prog. So runtime recursion check is necessary to avoid stack corruption. Current private stack only supports kprobe/perf_event/tp/raw_tp which has recursion check in the kernel, and prog types that use bpf trampoline recursion check. For trampoline related prog types, currently only tracing progs have recursion checking. To avoid complexity, all async_cb subprogs use normal kernel stack including those subprogs used by both main prog subtree and async_cb subtree. Any prog having tail call also uses kernel stack. To avoid jit penalty with private stack support, a subprog stack size threshold is set such that only if the stack size is no less than the threshold, private stack is supported. The current threshold is 64 bytes. This avoids jit penality if the stack usage is small. A useless 'continue' is also removed from a loop in func check_max_stack_depth(). Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20241112163907.2223839-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Kumar Kartikeya Dwivedi
|
ae6e3a273f |
bpf: Drop special callback reference handling
Logic to prevent callbacks from acquiring new references for the program (i.e. leaving acquired references), and releasing caller references (i.e. those acquired in parent frames) was introduced in commit |
||
|
Kumar Kartikeya Dwivedi
|
f6b9a69a9e |
bpf: Refactor active lock management
When bpf_spin_lock was introduced originally, there was deliberation on whether to use an array of lock IDs, but since bpf_spin_lock is limited to holding a single lock at any given time, we've been using a single ID to identify the held lock. In preparation for introducing spin locks that can be taken multiple times, introduce support for acquiring multiple lock IDs. For this purpose, reuse the acquired_refs array and store both lock and pointer references. We tag the entry with REF_TYPE_PTR or REF_TYPE_LOCK to disambiguate and find the relevant entry. The ptr field is used to track the map_ptr or btf (for bpf_obj_new allocations) to ensure locks can be matched with protected fields within the same "allocation", i.e. bpf_obj_new object or map value. The struct active_lock is changed to an int as the state is part of the acquired_refs array, and we only need active_lock as a cheap way of detecting lock presence. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241109231430.2475236-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> |
||
|
Hou Tao
|
b9e9ed90b1 |
bpf: Call free_htab_elem() after htab_unlock_bucket()
For htab of maps, when the map is removed from the htab, it may hold the last reference of the map. bpf_map_fd_put_ptr() will invoke bpf_map_free_id() to free the id of the removed map element. However, bpf_map_fd_put_ptr() is invoked while holding a bucket lock (raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock (spinlock_t), triggering the following lockdep warning: ============================= [ BUG: Invalid wait context ] 6.11.0-rc4+ #49 Not tainted ----------------------------- test_maps/4881 is trying to lock: ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70 other info that might help us debug this: context-{5:5} 2 locks held by test_maps/4881: #0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270 #1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_map_update_elem+0x178/0xa80 stack backtrace: CPU: 0 UID: 0 PID: 4881 Comm: test_maps Not tainted 6.11.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... Call Trace: <TASK> dump_stack_lvl+0x6e/0xb0 dump_stack+0x10/0x20 __lock_acquire+0x73e/0x36c0 lock_acquire+0x182/0x450 _raw_spin_lock_irqsave+0x43/0x70 bpf_map_free_id.part.0+0x21/0x70 bpf_map_put+0xcf/0x110 bpf_map_fd_put_ptr+0x9a/0xb0 free_htab_elem+0x69/0xe0 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 bpf_map_update_value+0x266/0x380 __sys_bpf+0x21bb/0x36b0 __x64_sys_bpf+0x45/0x60 x64_sys_call+0x1b2a/0x20d0 do_syscall_64+0x5d/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e One way to fix the lockdep warning is using raw_spinlock_t for map_idr_lock as well. However, bpf_map_alloc_id() invokes idr_alloc_cyclic() after acquiring map_idr_lock, it will trigger a similar lockdep warning because the slab's lock (s->cpu_slab->lock) is still a spinlock. Instead of changing map_idr_lock's type, fix the issue by invoking htab_put_fd_value() after htab_unlock_bucket(). However, only deferring the invocation of htab_put_fd_value() is not enough, because the old map pointers in htab of maps can not be saved during batched deletion. Therefore, also defer the invocation of free_htab_elem(), so these to-be-freed elements could be linked together similar to lru map. There are four callers for ->map_fd_put_ptr: (1) alloc_htab_elem() (through htab_put_fd_value()) It invokes ->map_fd_put_ptr() under a raw_spinlock_t. The invocation of htab_put_fd_value() can not simply move after htab_unlock_bucket(), because the old element has already been stashed in htab->extra_elems. It may be reused immediately after htab_unlock_bucket() and the invocation of htab_put_fd_value() after htab_unlock_bucket() may release the newly-added element incorrectly. Therefore, saving the map pointer of the old element for htab of maps before unlocking the bucket and releasing the map_ptr after unlock. Beside the map pointer in the old element, should do the same thing for the special fields in the old element as well. (2) free_htab_elem() (through htab_put_fd_value()) Its caller includes __htab_map_lookup_and_delete_elem(), htab_map_delete_elem() and __htab_map_lookup_and_delete_batch(). For htab_map_delete_elem(), simply invoke free_htab_elem() after htab_unlock_bucket(). For __htab_map_lookup_and_delete_batch(), just like lru map, linking the to-be-freed element into node_to_free list and invoking free_htab_elem() for these element after unlock. It is safe to reuse batch_flink as the link for node_to_free, because these elements have been removed from the hash llist. Because htab of maps doesn't support lookup_and_delete operation, __htab_map_lookup_and_delete_elem() doesn't have the problem, so kept it as is. (3) fd_htab_map_free() It invokes ->map_fd_put_ptr without raw_spinlock_t. (4) bpf_fd_htab_map_update_elem() It invokes ->map_fd_put_ptr without raw_spinlock_t. After moving free_htab_elem() outside htab bucket lock scope, using pcpu_freelist_push() instead of __pcpu_freelist_push() to disable the irq before freeing elements, and protecting the invocations of bpf_mem_cache_free() with migrate_{disable|enable} pair. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241106063542.357743-2-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> |
||
|
Jiri Olsa
|
d920179b3d |
bpf: Add support for uprobe multi session attach
Adding support to attach BPF program for entry and return probe of the same function. This is common use case which at the moment requires to create two uprobe multi links. Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs kernel to attach single link program to both entry and exit probe. It's possible to control execution of the BPF program on return probe simply by returning zero or non zero from the entry BPF program execution to execute or not the BPF program on return probe respectively. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org |
||
|
Jiri Olsa
|
17c4b65a24 |
bpf: Allow return values 0 and 1 for kprobe session
The kprobe session program can return only 0 or 1,
instruct verifier to check for that.
Fixes:
|
||
|
Kumar Kartikeya Dwivedi
|
cb4158ce8e |
bpf: Mark raw_tp arguments with PTR_MAYBE_NULL
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Fixes:
|
||
|
Kumar Kartikeya Dwivedi
|
d402755ced |
bpf: Unify resource leak checks
There are similar checks for covering locks, references, RCU read sections and preempt_disable sections in 3 places in the verifer, i.e. for tail calls, bpf_ld_[abs, ind], and exit path (for BPF_EXIT and bpf_throw). Unify all of these into a common check_resource_leak function to avoid code duplication. Also update the error strings in selftests to the new ones in the same change to ensure clean bisection. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20241103225940.1408302-3-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Kumar Kartikeya Dwivedi
|
46f7ed32f7 |
bpf: Tighten tail call checks for lingering locks, RCU, preempt_disable
There are three situations when a program logically exits and transfers control to the kernel or another program: bpf_throw, BPF_EXIT, and tail calls. The former two check for any lingering locks and references, but tail calls currently do not. Expand the checks to check for spin locks, RCU read sections and preempt disabled sections. Spin locks are indirectly preventing tail calls as function calls are disallowed, but the checks for preemption and RCU are more relaxed, hence ensure tail calls are prevented in their presence. Fixes: |
||
|
Andrii Nakryiko
|
24507ce81e |
bpf: ensure RCU Tasks Trace GP for sleepable raw tracepoint BPF links
Now that kernel supports sleepable tracepoints, the fact that
bpf_probe_unregister() is asynchronous, i.e., that it doesn't wait for
any in-flight tracepoints to conclude before returning, we now need to
delay BPF raw tp link's deallocation and bpf_prog_put() of its
underlying BPF program (regardless of program's own sleepable semantics)
until after full RCU Tasks Trace GP. With that GP over, we'll have
a guarantee that no tracepoint can reach BPF link and thus its BPF program.
We use newly added tracepoint_is_faultable() check to know when this RCU
Tasks Trace GP is necessary and utilize BPF link's own sleepable flag
passed through bpf_link_init_sleepable() initializer.
Link: https://lore.kernel.org/20241101181754.782341-3-andrii@kernel.org
Tested-by: Jordan Rife <jrife@google.com>
Reported-by: Jordan Rife <jrife@google.com>
Fixes:
|
||
|
Andrii Nakryiko
|
61c6fefa92 |
bpf: decouple BPF link/attach hook and BPF program sleepable semantics
BPF link's lifecycle protection scheme depends on both BPF hook and BPF program. If *either* of those require RCU Tasks Trace GP, then we need to go through a chain of GPs before putting BPF program refcount and deallocating BPF link memory. This patch adds bpf_link-specific sleepable flag, which can be set to true even if underlying BPF program is not sleepable itself. If either link->sleepable or link->prog->sleepable is true, we'll go through a chain of RCU Tasks Trace GP and RCU GP before putting BPF program and freeing memory. This will be used to protect BPF link for sleepable (faultable) raw tracepoints in the next patch. Link: https://lore.kernel.org/20241101181754.782341-2-andrii@kernel.org Tested-by: Jordan Rife <jrife@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Andrii Nakryiko
|
f44ec8733a |
bpf: put bpf_link's program when link is safe to be deallocated
In general, BPF link's underlying BPF program should be considered to be reachable through attach hook -> link -> prog chain, and, pessimistically, we have to assume that as long as link's memory is not safe to free, attach hook's code might hold a pointer to BPF program and use it. As such, it's not (generally) correct to put link's program early before waiting for RCU GPs to go through. More eager bpf_prog_put() that we currently do is mostly correct due to BPF program's release code doing similar RCU GP waiting, but as will be shown in the following patches, BPF program can be non-sleepable (and, thus, reliant on only "classic" RCU GP), while BPF link's attach hook can have sleepable semantics and needs to be protected by RCU Tasks Trace, and for such cases BPF link has to go through RCU Tasks Trace + "classic" RCU GPs before being deallocated. And so, if we put BPF program early, we might free BPF program before we free BPF link, leading to use-after-free situation. So, this patch defers bpf_prog_put() until we are ready to perform bpf_link's deallocation. At worst, this delays BPF program freeing by one extra RCU GP, but that seems completely acceptable. Alternatively, we'd need more elaborate ways to determine BPF hook, BPF link, and BPF program lifetimes, and how they relate to each other, which seems like an unnecessary complication. Note, for most BPF links we still will perform eager bpf_prog_put() and link dealloc, so for those BPF links there are no observable changes whatsoever. Only BPF links that use deferred dealloc might notice slightly delayed freeing of BPF programs. Also, to reduce code and logic duplication, extract program put + link dealloc logic into bpf_link_dealloc() helper. Link: https://lore.kernel.org/20241101181754.782341-1-andrii@kernel.org Tested-by: Jordan Rife <jrife@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Namhyung Kim
|
2e9a548009 |
bpf: Add open coded version of kmem_cache iterator
Add a new open coded iterator for kmem_cache which can be called from a
BPF program like below. It doesn't take any argument and traverses all
kmem_cache entries.
struct kmem_cache *pos;
bpf_for_each(kmem_cache, pos) {
...
}
As it needs to grab slab_mutex, it should be called from sleepable BPF
programs only.
Also update the existing iterator code to use the open coded version
internally as suggested by Andrii.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241030222819.1800667-1-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Linus Torvalds
|
5635f18942 |
BPF fixes:
- Fix BPF verifier to force a checkpoint when the program's jump history becomes too long (Eduard Zingerman) - Add several fixes to the BPF bits iterator addressing issues like memory leaks and overflow problems (Hou Tao) - Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong) - Fix BPF test infra's LIVE_FRAME frame update after a page has been recycled (Toke Høiland-Jørgensen) - Fix BPF verifier and undo the 40-bytes extra stack space for bpf_fastcall patterns due to various bugs (Eduard Zingerman) - Fix a BPF sockmap race condition which could trigger a NULL pointer dereference in sock_map_link_update_prog (Cong Wang) - Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk under the socket lock (Jiayuan Chen) Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> -----BEGIN PGP SIGNATURE----- iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZyQO/RUcZGFuaWVsQGlv Z2VhcmJveC5uZXQACgkQ2yufC7HISIO2vAD+NAng11x6W9tnIOVDHTwvsWL4aafQ pmf1zda90bwCIyIA/07ptFPWOH+WTmWqP8pZ9PGY5279KAxurZZDud0SOwIO =28aY -----END PGP SIGNATURE----- Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Pull bpf fixes from Daniel Borkmann: - Fix BPF verifier to force a checkpoint when the program's jump history becomes too long (Eduard Zingerman) - Add several fixes to the BPF bits iterator addressing issues like memory leaks and overflow problems (Hou Tao) - Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong) - Fix BPF test infra's LIVE_FRAME frame update after a page has been recycled (Toke Høiland-Jørgensen) - Fix BPF verifier and undo the 40-bytes extra stack space for bpf_fastcall patterns due to various bugs (Eduard Zingerman) - Fix a BPF sockmap race condition which could trigger a NULL pointer dereference in sock_map_link_update_prog (Cong Wang) - Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk under the socket lock (Jiayuan Chen) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled selftests/bpf: Add three test cases for bits_iter bpf: Use __u64 to save the bits in bits iterator bpf: Check the validity of nr_words in bpf_iter_bits_new() bpf: Add bpf_mem_alloc_check_size() helper bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf: disallow 40-bytes extra stack for bpf_fastcall patterns selftests/bpf: Add test for trie_get_next_key() bpf: Fix out-of-bounds write in trie_get_next_key() selftests/bpf: Test with a very short loop bpf: Force checkpoint when jmp history is too long bpf: fix filed access without lock sock_map: fix a NULL pointer dereference in sock_map_link_update_prog() |
||
|
Hou Tao
|
e133938367 |
bpf: Use __u64 to save the bits in bits iterator
On 32-bit hosts (e.g., arm32), when a bpf program passes a u64 to bpf_iter_bits_new(), bpf_iter_bits_new() will use bits_copy to store the content of the u64. However, bits_copy is only 4 bytes, leading to stack corruption. The straightforward solution would be to replace u64 with unsigned long in bpf_iter_bits_new(). However, this introduces confusion and problems for 32-bit hosts because the size of ulong in bpf program is 8 bytes, but it is treated as 4-bytes after passed to bpf_iter_bits_new(). Fix it by changing the type of both bits and bit_count from unsigned long to u64. However, the change is not enough. The main reason is that bpf_iter_bits_next() uses find_next_bit() to find the next bit and the pointer passed to find_next_bit() is an unsigned long pointer instead of a u64 pointer. For 32-bit little-endian host, it is fine but it is not the case for 32-bit big-endian host. Because under 32-bit big-endian host, the first iterated unsigned long will be the bits 32-63 of the u64 instead of the expected bits 0-31. Therefore, in addition to changing the type, swap the two unsigned longs within the u64 for 32-bit big-endian host. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241030100516.3633640-5-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Hou Tao
|
393397fbdc |
bpf: Check the validity of nr_words in bpf_iter_bits_new()
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes.
Fixes:
|
||
|
Hou Tao
|
62a898b07b |
bpf: Add bpf_mem_alloc_check_size() helper
Introduce bpf_mem_alloc_check_size() to check whether the allocation size exceeds the limitation for the kmalloc-equivalent allocator. The upper limit for percpu allocation is LLIST_NODE_SZ bytes larger than non-percpu allocation, so a percpu argument is added to the helper. The helper will be used in the following patch to check whether the size parameter passed to bpf_mem_alloc() is too big. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20241030100516.3633640-3-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Hou Tao
|
101ccfbabf |
bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()
bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the
bits are dynamically allocated. However, the check is incorrect and may
cause a kmemleak as shown below:
unreferenced object 0xffff88812628c8c0 (size 32):
comm "swapper/0", pid 1, jiffies 4294727320
hex dump (first 32 bytes):
b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U...........
f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 ..............
backtrace (crc 781e32cc):
[<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80
[<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0
[<00000000597124d6>] __alloc.isra.0+0x89/0xb0
[<000000004ebfffcd>] alloc_bulk+0x2af/0x720
[<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0
[<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610
[<000000008b616eac>] bpf_global_ma_init+0x19/0x30
[<00000000fc473efc>] do_one_initcall+0xd3/0x3c0
[<00000000ec81498c>] kernel_init_freeable+0x66a/0x940
[<00000000b119f72f>] kernel_init+0x20/0x160
[<00000000f11ac9a7>] ret_from_fork+0x3c/0x70
[<0000000004671da4>] ret_from_fork_asm+0x1a/0x30
That is because nr_bits will be set as zero in bpf_iter_bits_next()
after all bits have been iterated.
Fix the issue by setting kit->bit to kit->nr_bits instead of setting
kit->nr_bits to zero when the iteration completes in
bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to
check whether the iteration is complete and still use "nr_bits > 64" to
indicate whether bits are dynamically allocated. The "!nr_bits" check is
necessary because bpf_iter_bits_new() may fail before setting
kit->nr_bits, and this condition will stop the iteration early instead
of accessing the zeroed or freed kit->bits.
Considering the initial value of kit->bits is -1 and the type of
kit->nr_bits is unsigned int, change the type of kit->nr_bits to int.
The potential overflow problem will be handled in the following patch.
Fixes:
|
||
|
Eduard Zingerman
|
d0b98f6a17 |
bpf: disallow 40-bytes extra stack for bpf_fastcall patterns
Hou Tao reported an issue with bpf_fastcall patterns allowing extra
stack space above MAX_BPF_STACK limit. This extra stack allowance is
not integrated properly with the following verifier parts:
- backtracking logic still assumes that stack can't exceed
MAX_BPF_STACK;
- bpf_verifier_env->scratched_stack_slots assumes only 64 slots are
available.
Here is an example of an issue with precision tracking
(note stack slot -8 tracked as precise instead of -520):
0: (b7) r1 = 42 ; R1_w=42
1: (b7) r2 = 42 ; R2_w=42
2: (7b) *(u64 *)(r10 -512) = r1 ; R1_w=42 R10=fp0 fp-512_w=42
3: (7b) *(u64 *)(r10 -520) = r2 ; R2_w=42 R10=fp0 fp-520_w=42
4: (85) call bpf_get_smp_processor_id#8 ; R0_w=scalar(...)
5: (79) r2 = *(u64 *)(r10 -520) ; R2_w=42 R10=fp0 fp-520_w=42
6: (79) r1 = *(u64 *)(r10 -512) ; R1_w=42 R10=fp0 fp-512_w=42
7: (bf) r3 = r10 ; R3_w=fp0 R10=fp0
8: (0f) r3 += r2
mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 7: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 6: (79) r1 = *(u64 *)(r10 -512)
mark_precise: frame0: regs=r2 stack= before 5: (79) r2 = *(u64 *)(r10 -520)
mark_precise: frame0: regs= stack=-8 before 4: (85) call bpf_get_smp_processor_id#8
mark_precise: frame0: regs= stack=-8 before 3: (7b) *(u64 *)(r10 -520) = r2
mark_precise: frame0: regs=r2 stack= before 2: (7b) *(u64 *)(r10 -512) = r1
mark_precise: frame0: regs=r2 stack= before 1: (b7) r2 = 42
9: R2_w=42 R3_w=fp42
9: (95) exit
This patch disables the additional allowance for the moment.
Also, two test cases are removed:
- bpf_fastcall_max_stack_ok:
it fails w/o additional stack allowance;
- bpf_fastcall_max_stack_fail:
this test is no longer necessary, stack size follows
regular rules, pattern invalidation is checked by other
test cases.
Reported-by: Hou Tao <houtao@huaweicloud.com>
Closes: https://lore.kernel.org/bpf/20241023022752.172005-1-houtao@huaweicloud.com/
Fixes:
|
||
|
Linus Torvalds
|
c1e939a21e |
cgroup: Fixes for v6.12-rc5
- cgroup_bpf_release_fn() could saturate system_wq with cgrp->bpf.release_work which can then form a circular dependency leading to deadlocks. Fix by using a dedicated workqueue. The system_wq's max concurrency limit is being increased separately. - Fix theoretical off-by-one bug when enforcing max cgroup hierarchy depth. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZyGCPA4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGS2MAQDmtRNBlDYl36fiLAsylU4Coz5P0Y4ISmtSWT+c zrEUZAD/WKSlCfy4RFngmnfkYbrJ+tWOVTMtsDqby8IzYLDGBw8= =glRQ -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - cgroup_bpf_release_fn() could saturate system_wq with cgrp->bpf.release_work which can then form a circular dependency leading to deadlocks. Fix by using a dedicated workqueue. The system_wq's max concurrency limit is being increased separately. - Fix theoretical off-by-one bug when enforcing max cgroup hierarchy depth * tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Fix potential overflow issue when checking max_depth cgroup/bpf: use a dedicated workqueue for cgroup bpf destruction |
||
|
Byeonguk Jeong
|
13400ac8fb |
bpf: Fix out-of-bounds write in trie_get_next_key()
trie_get_next_key() allocates a node stack with size trie->max_prefixlen,
while it writes (trie->max_prefixlen + 1) nodes to the stack when it has
full paths from the root to leaves. For example, consider a trie with
max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ...
0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with
.prefixlen = 8 make 9 nodes be written on the node stack with size 8.
Fixes:
|
||
|
Eduard Zingerman
|
aa30eb3260 |
bpf: Force checkpoint when jmp history is too long
A specifically crafted program might trick verifier into growing very
long jump history within a single bpf_verifier_state instance.
Very long jump history makes mark_chain_precision() unreasonably slow,
especially in case if verifier processes a loop.
Mitigate this by forcing new state in is_state_visited() in case if
current state's jump history is too long.
Use same constant as in `skip_inf_loop_check`, but multiply it by
arbitrarily chosen value 2 to account for jump history containing not
only information about jumps, but also information about stack access.
For an example of problematic program consider the code below,
w/o this patch the example is processed by verifier for ~15 minutes,
before failing to allocate big-enough chunk for jmp_history.
0: r7 = *(u16 *)(r1 +0);"
1: r7 += 0x1ab064b9;"
2: if r7 & 0x702000 goto 1b;
3: r7 &= 0x1ee60e;"
4: r7 += r1;"
5: if r7 s> 0x37d2 goto +0;"
6: r0 = 0;"
7: exit;"
Perf profiling shows that most of the time is spent in
mark_chain_precision() ~95%.
The easiest way to explain why this program causes problems is to
apply the following patch:
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 0c216e71cec7..4b4823961abe 100644
\--- a/include/linux/bpf.h
\+++ b/include/linux/bpf.h
\@@ -1926,7 +1926,7 @@ struct bpf_array {
};
};
-#define BPF_COMPLEXITY_LIMIT_INSNS 1000000 /* yes. 1M insns */
+#define BPF_COMPLEXITY_LIMIT_INSNS 256 /* yes. 1M insns */
#define MAX_TAIL_CALL_CNT 33
/* Maximum number of loops for bpf_loop and bpf_iter_num.
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index f514247ba8ba..75e88be3bb3e 100644
\--- a/kernel/bpf/verifier.c
\+++ b/kernel/bpf/verifier.c
\@@ -18024,8 +18024,13 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
skip_inf_loop_check:
if (!force_new_state &&
env->jmps_processed - env->prev_jmps_processed < 20 &&
- env->insn_processed - env->prev_insn_processed < 100)
+ env->insn_processed - env->prev_insn_processed < 100) {
+ verbose(env, "is_state_visited: suppressing checkpoint at %d, %d jmps processed, cur->jmp_history_cnt is %d\n",
+ env->insn_idx,
+ env->jmps_processed - env->prev_jmps_processed,
+ cur->jmp_history_cnt);
add_new_state = false;
+ }
goto miss;
}
/* If sl->state is a part of a loop and this loop's entry is a part of
\@@ -18142,6 +18147,9 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
if (!add_new_state)
return 0;
+ verbose(env, "is_state_visited: new checkpoint at %d, resetting env->jmps_processed\n",
+ env->insn_idx);
+
/* There were no equivalent states, remember the current one.
* Technically the current state is not proven to be safe yet,
* but it will either reach outer most bpf_exit (which means it's safe)
And observe verification log:
...
is_state_visited: new checkpoint at 5, resetting env->jmps_processed
5: R1=ctx() R7=ctx(...)
5: (65) if r7 s> 0x37d2 goto pc+0 ; R7=ctx(...)
6: (b7) r0 = 0 ; R0_w=0
7: (95) exit
from 5 to 6: R1=ctx() R7=ctx(...) R10=fp0
6: R1=ctx() R7=ctx(...) R10=fp0
6: (b7) r0 = 0 ; R0_w=0
7: (95) exit
is_state_visited: suppressing checkpoint at 1, 3 jmps processed, cur->jmp_history_cnt is 74
from 2 to 1: R1=ctx() R7_w=scalar(...) R10=fp0
1: R1=ctx() R7_w=scalar(...) R10=fp0
1: (07) r7 += 447767737
is_state_visited: suppressing checkpoint at 2, 3 jmps processed, cur->jmp_history_cnt is 75
2: R7_w=scalar(...)
2: (45) if r7 & 0x702000 goto pc-2
... mark_precise 152 steps for r7 ...
2: R7_w=scalar(...)
is_state_visited: suppressing checkpoint at 1, 4 jmps processed, cur->jmp_history_cnt is 75
1: (07) r7 += 447767737
is_state_visited: suppressing checkpoint at 2, 4 jmps processed, cur->jmp_history_cnt is 76
2: R7_w=scalar(...)
2: (45) if r7 & 0x702000 goto pc-2
...
BPF program is too large. Processed 257 insn
The log output shows that checkpoint at label (1) is never created,
because it is suppressed by `skip_inf_loop_check` logic:
a. When 'if' at (2) is processed it pushes a state with insn_idx (1)
onto stack and proceeds to (3);
b. At (5) checkpoint is created, and this resets
env->{jmps,insns}_processed.
c. Verification proceeds and reaches `exit`;
d. State saved at step (a) is popped from stack and is_state_visited()
considers if checkpoint needs to be added, but because
env->{jmps,insns}_processed had been just reset at step (b)
the `skip_inf_loop_check` logic forces `add_new_state` to false.
e. Verifier proceeds with current state, which slowly accumulates
more and more entries in the jump history.
The accumulation of entries in the jump history is a problem because
of two factors:
- it eventually exhausts memory available for kmalloc() allocation;
- mark_chain_precision() traverses the jump history of a state,
meaning that if `r7` is marked precise, verifier would iterate
ever growing jump history until parent state boundary is reached.
(note: the log also shows a REG INVARIANTS VIOLATION warning
upon jset processing, but that's another bug to fix).
With this patch applied, the example above is rejected by verifier
under 1s of time, reaching 1M instructions limit.
The program is a simplified reproducer from syzbot report.
Previous discussion could be found at [1].
The patch does not cause any changes in verification performance,
when tested on selftests from veristat.cfg and cilium programs taken
from [2].
[1] https://lore.kernel.org/bpf/20241009021254.2805446-1-eddyz87@gmail.com/
[2] https://github.com/anakryiko/cilium
Changelog:
- v1 -> v2:
- moved patch to bpf tree;
- moved force_new_state variable initialization after declaration and
shortened the comment.
v1: https://lore.kernel.org/bpf/20241018020307.1766906-1-eddyz87@gmail.com/
Fixes:
|