When a peer decides to close one subflow in the middle of a connection
having multiple subflows, the receiver of the first FIN should accept
that, and close the subflow on its side as well. If not, the subflow
will stay half closed, and would even continue to be used until the end
of the MPTCP connection or a reset from the network.
The issue has not been seen before, probably because the in-kernel
path-manager always sends a RM_ADDR before closing the subflow. Upon the
reception of this RM_ADDR, the other peer will initiate the closure on
its side as well. On the other hand, if the RM_ADDR is lost, or if the
path-manager of the other peer only closes the subflow without sending a
RM_ADDR, the subflow would switch to TCP_CLOSE_WAIT, but that's it,
leaving the subflow half-closed.
So now, when the subflow switches to the TCP_CLOSE_WAIT state, and if
the MPTCP connection has not been closed before with a DATA_FIN, the
kernel owning the subflow schedules its worker to initiate the closure
on its side as well.
This issue can be easily reproduced with packetdrill, as visible in [1],
by creating an additional subflow, injecting a FIN+ACK before sending
the DATA_FIN, and expecting a FIN+ACK in return.
Fixes: 40947e1399 ("mptcp: schedule worker when subflow is closed")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/packetdrill/pull/154 [1]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-1-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.
A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first
looks for fullmesh endpoints. If there are some, it will pick them,
using their entry ID.
It should set the ID 0 when using the endpoint corresponding to the
initial subflow, it is a special case imposed by the MPTCP specs.
Note that msk->mpc_endpoint_id might not be set when receiving the first
ADD_ADDR from the server. So better to compare the addresses.
Fixes: 1a0d6136c5 ("mptcp: local addresses fullmesh")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ID 0 is specific per MPTCP connections. The per netns entries cannot
have this special ID 0 then.
But that's different for the userspace PM where the entries are per
connection, they can then use this special ID 0.
Fixes: f40be0db0b ("mptcp: unify pm get_flags_and_ifindex_by_id")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-11-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the following warning ...
WARN_ON_ONCE(msk->pm.add_addr_accepted == 0)
... before decrementing the add_addr_accepted counter helped to find a
bug when running the "remove single subflow" subtest from the
mptcp_join.sh selftest.
Removing a 'subflow' endpoint will first trigger a RM_ADDR, then the
subflow closure. Before this patch, and upon the reception of the
RM_ADDR, the other peer will then try to decrement this
add_addr_accepted. That's not correct because the attached subflows have
not been created upon the reception of an ADD_ADDR.
A way to solve that is to decrement the counter only if the attached
subflow was an MP_JOIN to a remote id that was not 0, and initiated by
the host receiving the RM_ADDR.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-9-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the following warning ...
WARN_ON_ONCE(msk->pm.local_addr_used == 0)
... before decrementing the local_addr_used counter helped to find a bug
when running the "remove single address" subtest from the mptcp_join.sh
selftests.
Removing a 'signal' endpoint will trigger the removal of all subflows
linked to this endpoint via mptcp_pm_nl_rm_addr_or_subflow() with
rm_type == MPTCP_MIB_RMSUBFLOW. This will decrement the local_addr_used
counter, which is wrong in this case because this counter is linked to
'subflow' endpoints, and here it is a 'signal' endpoint that is being
removed.
Now, the counter is decremented, only if the ID is being used outside
of mptcp_pm_nl_rm_addr_or_subflow(), only for 'subflow' endpoints, and
if the ID is not 0 -- local_addr_used is not taking into account these
ones. This marking of the ID as being available, and the decrement is
done no matter if a subflow using this ID is currently available,
because the subflow could have been closed before.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-8-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This helper is confusing. It is in pm.c, but it is specific to the
in-kernel PM and it cannot be used by the userspace one. Also, it simply
calls one in-kernel specific function with the PM lock, while the
similar mptcp_pm_remove_addr() helper requires the PM lock.
What's left is the pr_debug(), which is not that useful, because a
similar one is present in the only function called by this helper:
mptcp_pm_nl_rm_subflow_received()
After these modifications, this helper can be marked as 'static', and
the lock can be taken only once in mptcp_pm_flush_addrs_and_subflows().
Note that it is not a bug fix, but it will help backporting the
following commits.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-7-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflows are attached to the 'subflow' endpoints that are being
flushed, the corresponding addr IDs will not be marked as available
again.
Mark all ID as being available when flushing all the 'subflow'
endpoints, and reset local_addr_used counter to cover these cases.
Note that mptcp_pm_remove_addrs_and_subflows() helper is only called for
flushing operations, not to remove a specific set of addresses and
subflows.
Fixes: 06faa22710 ("mptcp: remove multi addresses and subflows in PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-5-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflow is attached to the 'subflow' endpoint that is being
removed, the addr ID will not be marked as available again.
Mark the linked ID as available when removing the 'subflow' endpoint if
no subflow is attached to it.
While at it, the local_addr_used counter is decremented if the ID was
marked as being used to reflect the reality, but also to allow adding
new endpoints after that.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-3-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If no subflow is attached to the 'signal' endpoint that is being
removed, the addr ID will not be marked as available again.
Mark the linked ID as available when removing the address entry from the
list to cover this case.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-1-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ssn_offset field is u32 and is placed into the netlink response with
nla_put_u32(), but only 2 bytes are reserved for the attribute payload
in subflow_get_info_size() (even though it makes no difference
in the end, as it is aligned up to 4 bytes). Supply the correct
argument to the relevant nla_total_size() call to make it less
confusing.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240812065024.GA19719@asgard.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a subflow receives and discards duplicate data, the mptcp
stack assumes that the consumed offset inside the current skb is
zero.
With multiple subflows receiving data simultaneously such assertion
does not held true. As a result the subflow-level copied_seq will
be incorrectly increased and later on the same subflow will observe
a bad mapping, leading to subflow reset.
Address the issue taking into account the skb consumed offset in
mptcp_subflow_discard_data().
Fixes: 04e4cd4f7c ("mptcp: cleanup mptcp_subflow_discard_data()")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since its introduction, the mentioned MIB accounted for the wrong
event: wake-up being skipped as not-needed on some edge condition
instead of incoming skb being dropped after landing in the (subflow)
receive queue.
Move the increment in the correct location.
Fixes: ce599c5163 ("mptcp: properly account bulk freed memory")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There was a support for signal endpoints, but only when the endpoint's
flag was changed during a connection. If an endpoint with the signal and
backup was already present, the MP_JOIN reply was not containing the
backup flag as expected.
That's confusing to have this inconsistent behaviour. On the other hand,
the infrastructure to set the backup flag in the SYN + ACK + MP_JOIN was
already there, it was just never set before. Now when requesting the
local ID from the path-manager, the backup status is also requested.
Note that when the userspace PM is used, the backup flag can be set if
the local address was already used before with a backup flag, e.g. if
the address was announced with the 'backup' flag, or a subflow was
created with the 'backup' flag.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/507
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Without such counters, it is difficult to easily debug issues with MPJ
not having the backup flags on production servers.
This is not strictly a fix, but it eases to validate the following
patches without requiring to take packet traces, to query ongoing
connections with Netlink with admin permissions, or to guess by looking
at the behaviour of the packet scheduler. Also, the modification is self
contained, isolated, well controlled, and the increments are done just
after others, there from the beginning. It looks then safe, and helpful
to backport this.
Fixes: 4596a2c1b7 ("mptcp: allow creating non-backup subflows")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'backup' flag from mptcp_subflow_context structure is supposed to be
set only when the other peer flagged a subflow as backup, not the
opposite.
Fixes: 067065422f ("mptcp: add the outgoing MP_PRIO support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sending an MP_JOIN + SYN + ACK, it is possible to mark the subflow
as 'backup' by setting the flag with the same name. Before this patch,
the backup was set if the other peer set it in its MP_JOIN + SYN
request.
It is not correct: the backup flag should be set in the MPJ+SYN+ACK only
if the host asks for it, and not mirroring what was done by the other
peer. It is then required to have a dedicated bit for each direction,
similar to what is done in the subflow context.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Before this patch, the scheduler was only looking at the 'backup' flag.
That can make sense in some cases, but it looks like that's not what we
wanted for the general use, because either the path-manager was setting
both of them when sending an MP_PRIO, or the receiver was duplicating
the 'backup' flag in the subflow request.
Note that the use of these two flags in the path-manager are going to be
fixed in the next commits, but this change here is needed not to modify
the behaviour.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the per connection announced address counter is never
decreased. As a consequence, after connection establishment, if
the NL PM deletes an endpoint and adds a new/different one, no
additional subflow is created for the new endpoint even if the
current limits allow that.
Address the issue properly updating the signaled address counter
every time the NL PM removes such addresses.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the per-connection announced address counter is never
decreased. When the user-space PM is in use, this just affect
the information exposed via diag/sockopt, but it could still foul
the PM to wrong decision.
Add the missing accounting for the user-space PM's sake.
Fixes: 8b1c94da1e ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is strictly related to commit fb7a0d3348 ("mptcp: ensure snd_nxt
is properly initialized on connect"). It turns out that syzkaller can
trigger the retransmit after fallback and before processing any other
incoming packet - so that snd_una is still left uninitialized.
Address the issue explicitly initializing snd_una together with snd_nxt
and write_seq.
Suggested-by: Mat Martineau <martineau@kernel.org>
Fixes: 8fd738049a ("mptcp: fallback in case of simultaneous connect")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-1-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We used to call it 'master' socket at the early stages of MPTCP
development, but the correct wording is 'MPTCP' socket opposed to 'TCP
subflows': convert the last 3 comments to use a more appropriate term.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As a wrapper of __tcp_space_from_win(), this patch adds a MPTCP dedicated
space_from_win helper mptcp_space_from_win() in protocol.h to paired with
mptcp_win_from_space().
Use it instead of __tcp_space_from_win() in both mptcp_rcv_space_adjust()
and mptcp_set_rcvlowat().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MPTCP dedicated win_from_space helper mptcp_win_from_space() is defined
in protocol.h, use it in mptcp_rcv_space_adjust() instead of using the TCP
one. Here scaling_ratio is the same as msk->scaling_ratio.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Like previous patch does in TCP, we need to adhere to RFC 1213:
"tcpCurrEstab OBJECT-TYPE
...
The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."
So let's consider CLOSE-WAIT sockets.
The logic of counting
When we increment the counter?
a) Only if we change the state to ESTABLISHED.
When we decrement the counter?
a) if the socket leaves ESTABLISHED and will never go into CLOSE-WAIT,
say, on the client side, changing from ESTABLISHED to FIN-WAIT-1.
b) if the socket leaves CLOSE-WAIT, say, on the server side, changing
from CLOSE-WAIT to LAST-ACK.
Fixes: d9cd27b8cd ("mptcp: add CurrEstab MIB counter support")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=S6Xt
-----END PGP SIGNATURE-----
Merge tag 'net-accept-more-20240515' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"This adds support for IORING_CQE_F_SOCK_NONEMPTY for io_uring accept
requests.
This is very similar to previous work that enabled the same hint for
doing receives on sockets. By far the majority of the work here is
refactoring to enable the networking side to pass back whether or not
the socket had more pending requests after accepting the current one,
the last patch just wires it up for io_uring.
Not only does this enable applications to know whether there are more
connections to accept right now, it also enables smarter logic for
io_uring multishot accept on whether to retry immediately or wait for
a poll trigger"
* tag 'net-accept-more-20240515' of git://git.kernel.dk/linux:
io_uring/net: wire up IORING_CQE_F_SOCK_NONEMPTY for accept
net: pass back whether socket was empty post accept
net: have do_accept() take a struct proto_accept_arg argument
net: change proto and proto_ops accept type
So this file is now self-contained: it can be compiled alone with
analytic tools.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-9-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing from protocol.h depends on mptcp_pm_gen.h, only code from
pm_netlink.c and pm_userspace.c depends on it.
So this include can be moved where it is needed to avoid a "unused
includes" warning.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-8-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'else' statements are not needed here, because their previous 'if'
block ends with a 'return'.
This fixes CheckPatch warnings:
WARNING: else is not generally useful after a break or return
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-7-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy() [1].
This is in preparation of a possible future step where all strcpy() uses
will be removed in favour of strscpy() [2].
This fixes CheckPatch warnings:
WARNING: Prefer strscpy over strcpy
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Link: https://github.com/KSPP/linux/issues/88 [2]
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-6-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The sysctl lists the available schedulers that can be set using
net.mptcp.scheduler similarly to net.ipv4.tcp_available_congestion_control.
Signed-off-by: Gregory Detal <gregory.detal@gmail.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-5-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Up to recently, it has been recommended to use getsockopt(MPTCP_INFO) to
check if a fallback to TCP happened, or if the client requested to use
MPTCP.
In this case, the userspace app is only interested by the returned value
of the getsocktop() call, and can then give 0 for the option length, and
NULL for the buffer address. An easy optimisation is then to stop early,
and avoid filling a local buffer -- which now requires two different
locks -- if it is not needed.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-4-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SO_KEEPALIVE support has been added a while ago, as part of a series
"adding SOL_SOCKET" support. To have a full control of this keep-alive
feature, it is important to also support TCP_KEEP* socket options at the
SOL_TCP level.
Supporting them on the setsockopt() part is easy, it is just a matter of
remembering each value in the MPTCP sock structure, and calling
tcp_sock_set_keep*() helpers on each subflow. If the value is not
modified (0), calling these helpers will not do anything. For the
getsockopt() part, the corresponding value from the MPTCP sock structure
or the default one is simply returned. All of this is very similar to
other TCP_* socket options supported by MPTCP.
It looks important for kernels supporting SO_KEEPALIVE, to also support
TCP_KEEP* options as well: some apps seem to (wrongly) consider that if
the former is supported, the latter ones will be supported as well. But
also, not having this simple and isolated change is preventing MPTCP
support in some apps, and libraries like GoLang [1]. This is why this
patch is seen as a fix.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/383
Fixes: 1b3e7ede13 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY")
Link: https://github.com/golang/go/issues/56539 [1]
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-3-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SO_KEEPALIVE support has to be set on each subflow: on each TCP socket,
where sk_prot->keepalive is defined. Technically, nothing has to be done
on the MPTCP socket. That's why mptcp_sol_socket_sync_intval() was
called instead of mptcp_sol_socket_intval().
Except that when nothing is done on the MPTCP socket, the
getsockopt(SO_KEEPALIVE), handled in net/core/sock.c:sk_getsockopt(),
will not know if SO_KEEPALIVE has been set on the different subflows or
not.
The fix is simple: simply call mptcp_sol_socket_intval() which will end
up calling net/core/sock.c:sk_setsockopt() where the SOCK_KEEPOPEN flag
will be set, the one used in sk_getsockopt().
So now, getsockopt(SO_KEEPALIVE) on an MPTCP socket will return the same
value as the one previously set with setsockopt(SO_KEEPALIVE).
Fixes: 1b3e7ede13 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240514011335.176158-2-martineau@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than pass in flags, error pointer, and whether this is a kernel
invocation or not, add a struct proto_accept_arg struct as the argument.
This then holds all of these arguments, and prepares accept for being
able to pass back more information.
No functional changes in this patch.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A way for an application to know if an MPTCP connection fell back to TCP
is to use getsockopt(MPTCP_INFO) and look for errors. The issue with
this technique is that the same errors -- EOPNOTSUPP (IPv4) and
ENOPROTOOPT (IPv6) -- are returned if there was a fallback, *or* if the
kernel doesn't support this socket option. The userspace then has to
look at the kernel version to understand what the errors mean.
It is not clean, and it doesn't take into account older kernels where
the socket option has been backported. A cleaner way would be to expose
this info to the TCP socket level. In case of MPTCP socket where no
fallback happened, the socket options for the TCP level will be handled
in MPTCP code, in mptcp_getsockopt_sol_tcp(). If not, that will be in
TCP code, in do_tcp_getsockopt(). So MPTCP simply has to set the value
1, while TCP has to set 0.
If the socket option is not supported, one of these two errors will be
reported:
- EOPNOTSUPP (95 - Operation not supported) for MPTCP sockets
- ENOPROTOOPT (92 - Protocol not available) for TCP sockets, e.g. on the
socket received after an 'accept()', when the client didn't request to
use MPTCP: this socket will be a TCP one, even if the listen socket
was an MPTCP one.
With this new option, the kernel can return a clear answer to both "Is
this kernel new enough to tell me the fallback status?" and "If it is
new enough, is it currently a TCP or MPTCP socket?" questions, while not
breaking the previous method.
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240509-upstream-net-next-20240509-mptcp-tcp_is_mptcp-v1-1-f846df999202@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfba ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5f ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current behavior is to accept any strings as inputs, this results in
an inconsistent result where an unexisting scheduler can be set:
# sysctl -w net.mptcp.scheduler=notdefault
net.mptcp.scheduler = notdefault
This patch changes this behavior by checking for existing scheduler
before accepting the input.
Fixes: e3b2870b6d ("mptcp: add a new sysctl scheduler")
Cc: stable@vger.kernel.org
Signed-off-by: Gregory Detal <gregory.detal@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240506-upstream-net-20240506-mptcp-sched-exist-v1-1-2ed1529e521e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes the spelling mistakes in comments.
The changes were generated using codespell and reviewed manually.
eariler -> earlier
greceful -> graceful
Signed-off-by: Shi-Sheng Yang <fourcolor4c@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240502154740.249839-1-fourcolor4c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
To avoid lots of small commits, this commit brings together network
changes from (as they appear in MAINTAINERS) LLC, MPTCP, NETROM NETWORK
LAYER, PHONET PROTOCOL, ROSE NETWORK LAYER, RXRPC SOCKETS, SCTP
PROTOCOL, SHARED MEMORY COMMUNICATIONS (SMC), TIPC NETWORK LAYER and
NETWORKING [IPSEC]
* Remove sentinel element from ctl_table structs.
* Replace empty array registration with the register_net_sysctl_sz call
in llc_sysctl_init
* Replace the for loop stop condition that tests for procname == NULL
with one that depends on array size in sctp_sysctl_net_register
* Remove instances where an array element is zeroed out to make it look
like a sentinel in xfrm_sysctl_init. This is not longer needed and is
safe after commit c899710fe7 ("networking: Update to
register_net_sysctl_sz") added the array size to the ctl_table
registration
* Use a table_size variable to keep the value of ARRAY_SIZE
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctl_max_skb_frags is used in TCP and MPTCP fast paths,
move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240429134025.1233626-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since we have mapped every mptcp reset reason definition in enum
sk_rst_reason, introducing a new helper can cover some missing places
where we have already set the subflow->reset_reason.
Note: using SK_RST_REASON_NOT_SPECIFIED is the same as
SK_RST_REASON_MPTCP_RST_EUNSPEC. They are both unknown. So we can convert
it directly.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It relies on what reset options in the skb are as rfc8684 says. Reusing
this logic can save us much energy. This patch replaces most of the prior
NOT_SPECIFIED reasons.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Like what we did to passive reset:
only passing possible reset reason in each active reset path.
No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adjust the parameter and support passing reason of reset which
is for now NOT_SPECIFIED. No functional changes.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To be able to constify instances of struct ctl_tables it is necessary to
remove ways through which non-const versions are exposed from the
sysctl core.
One of these is the ctl_table_arg member of struct ctl_table_header.
Constify this reference as a prerequisite for the full constification of
struct ctl_table instances.
No functional change.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds "last time" fields last_data_sent, last_data_recv and
last_ack_recv in struct mptcp_sock to record the last time data_sent,
data_recv and ack_recv happened. They all are initialized as
tcp_jiffies32 in __mptcp_init_sock(), and updated as tcp_jiffies32 too
when data is sent in __subflow_push_pending(), data is received in
__mptcp_move_skbs_from_subflow(), and ack is received in ack_update_msk().
Similar to tcpi_last_data_sent, tcpi_last_data_recv and tcpi_last_ack_recv
exposed with TCP, this patch exposes the last time "an action happened" for
MPTCP in mptcp_info, named mptcpi_last_data_sent, mptcpi_last_data_recv and
mptcpi_last_ack_recv, calculated in mptcp_diag_fill_info() as the time
deltas between now and the newly added last time fields in mptcp_sock.
Since msk->last_ack_recv needs to be protected by mptcp_data_lock/unlock,
and lock_sock_fast can sleep and be quite slow, move the entire
mptcp_data_lock/unlock block after the lock/unlock_sock_fast block.
Then mptcpi_last_data_sent and mptcpi_last_data_recv are set in
lock/unlock_sock_fast block, while mptcpi_last_ack_recv is set in
mptcp_data_lock/unlock block, which is protected by a spinlock and
should not block for too long.
Also add three reserved bytes in struct mptcp_info not to have holes in
this structure exposed to userspace.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/446
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240410-upstream-net-next-20240405-mptcp-last-time-info-v2-1-f95bd6b33e51@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_v6_init_req() reads TCP_SKB_CB(skb)->tcp_tw_isn to find
out if the request socket is created by a SYN hitting a TIMEWAIT socket.
This has been buggy for a decade, lets directly pass the information
from tcp_conn_request().
This is a preparatory patch to make the following one easier to review.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The reason codes are handled in two ways nowadays (quoting Mat Martineau):
1. Sending in the MPTCP option on RST packets when there is no subflow
context available (these use subflow_add_reset_reason() and directly call
a TCP-level send_reset function)
2. The "normal" way via subflow->reset_reason. This will propagate to both
the outgoing reset packet and to a local path manager process via netlink
in mptcp_event_sub_closed()
RFC 8684 defines the skb reset reason behaviour which is not required
even though in some places:
A host sends a TCP RST in order to close a subflow or reject
an attempt to open a subflow (MP_JOIN). In order to let the
receiving host know why a subflow is being closed or rejected,
the TCP RST packet MAY include the MP_TCPRST option (Figure 15).
The host MAY use this information to decide, for example, whether
it tries to re-establish the subflow immediately, later, or never.
Since the commit dc87efdb1a ("mptcp: add mptcp reset option support")
introduced this feature about three years ago, we can fully use it.
There remains some places where we could insert reason into skb as
we can see in this patch.
Many thanks to Mat and Paolo for help:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tp->window_clamp can be read locklessly, add READ_ONCE()
and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240404114231.2195171-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can change inet_csk() to propagate its argument const qualifier,
thanks to container_of_const().
We have to fix few places that had mistakes, like tcp_bound_rto().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240329144931.295800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they
accept non-MPC connections. As reported by Christoph, this is "surprising"
because the counter might become greater than MPTcpExtMPCapableSYNRX.
MPTcpExtMPCapableFallbackACK counter's name suggests it should only be
incremented when a connection was seen using MPTCP options, then a
fallback to TCP has been done. Let's do that by incrementing it when
the subflow context of an inbound MPC connection attempt is dropped.
Also, update mptcp_connect.sh kselftest, to ensure that the
above MIB does not increment in case a pure TCP client connects to a
MPTCP server.
Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-1-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's possible that writer and the reader can manipulate the same
sysctl knob concurrently. Using READ_ONCE() to prevent reading
an old value.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the lookup_by_id parameter of __lookup_addr() is true, it's the same
as __lookup_addr_by_id(), it can be replaced by __lookup_addr_by_id()
directly. So drop this parameter, let __lookup_addr() only looks up address
on the local address list by comparing addresses in it, not address ids.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-4-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addition to returning the error value, this patch also sets an error
messages with GENL_SET_ERR_MSG or NL_SET_ERR_MSG_ATTR both for pm_netlink.c
and pm_userspace.c. It will help the userspace to identify the issue.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-3-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The headers net/tcp.h, net/genetlink.h and uapi/linux/mptcp.h are included
in protocol.h already, no need to include them again directly. This patch
removes these duplicate header inclusions.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-1-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch renames mptcp_pm_nl_get_addr_doit() as a dedicated in-kernel
netlink PM get addr function mptcp_pm_nl_get_addr(). and invoke a new
wrapper mptcp_pm_get_addr() in mptcp_pm_nl_get_addr_doit.
If a token is gotten in the wrapper, that means a userspace PM is used.
So invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
Otherwise, invoke mptcp_pm_nl_get_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements mptcp_userspace_pm_get_addr() to get an address
from userspace pm address list according the given 'token' and 'id'.
Use nla_get_u32() to get the u32 value of 'token', then pass it to
mptcp_token_get_sock() to get the msk. Pass 'msk' and 'id' to the helper
mptcp_userspace_pm_lookup_addr_by_id() to get the address entry. Put
this entry to userspace using mptcp_pm_nl_put_entry_info().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like MPTCP_PM_ADDR_FLAG_SIGNAL flag is checked in userspace PM
announce mptcp_pm_nl_announce_doit(), PM flags should be checked in
mptcp_pm_nl_subflow_create_doit() too.
If MPTCP_PM_ADDR_FLAG_SUBFLOW flag is not set, there's no flags field
in the output of dump_addr. This looks a bit strange:
id 10 flags 10.0.3.2
This patch uses mptcp_pm_parse_entry() instead of mptcp_pm_parse_addr()
to get the PM flags of the entry and check it. MPTCP_PM_ADDR_FLAG_SIGNAL
flag shouldn't be set here, and if MPTCP_PM_ADDR_FLAG_SUBFLOW flag is
missing from the netlink attribute, always set this flag.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch renames mptcp_pm_nl_get_addr_dumpit() as a dedicated in-kernel
netlink PM dump addrs function mptcp_pm_nl_dump_addr(), and invoke a newly
added wrapper mptcp_pm_dump_addr() in mptcp_pm_nl_get_addr_dumpit().
Invoke in-kernel PM dump addrs function mptcp_pm_nl_dump_addr() or
userspace PM dump addrs function mptcp_userspace_pm_dump_addr() based on
whether the token parameter is passed in or not in the wrapper.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds token parameter together with addr in get-addr section in
mptcp_pm.yaml, then use the following commands to update mptcp_pm_gen.c
and mptcp_pm_gen.h:
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --source \
-o net/mptcp/mptcp_pm_gen.c
./tools/net/ynl/ynl-gen-c.py --mode kernel \
--spec Documentation/netlink/specs/mptcp_pm.yaml --header \
-o net/mptcp/mptcp_pm_gen.h
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements mptcp_userspace_pm_dump_addr() to dump addresses
from userspace pm address list. Use mptcp_token_get_sock() to get the
msk from the given token, if userspace PM is enabled in it, traverse
each address entry in address list, put every entry to userspace using
mptcp_pm_nl_put_entry_msg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch exports struct mptcp_genl_family and mptcp_nl_fill_addr() helper
to allow them can be used in pm_userspace.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_pm_remove_addrs_and_subflows() is only used in pm_netlink.c, it's
no longer used in pm_userspace.c any more since the commit 8b1c94da1e
("mptcp: only send RM_ADDR in nl_cmd_remove"). So this patch changes it
to a static function.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most TCP-level socket options get an integer from user space, and
set the corresponding field under the msk-level socket lock.
Reduce the code duplication moving such operations in the common code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for such socket option storing the user-space provided
value in a new msk field, and using such data to implement the
_mptcp_stream_memory_free() helper, similar to the TCP one.
To avoid adding more indirect calls in the fast path, open-code
a variant of sk_stream_memory_free() in mptcp_sendmsg() and add
direct calls to the mptcp stream memory free helper where possible.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/464
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp_get_int_option() helper is needless open-coded in a
couple of places, replace the duplicate code with the helper
call.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 5cf92bbadc ("mptcp: re-enable sndbuf autotune"), the
MPTCP_NOSPACE bit is redundant: it is always set and cleared together with
SOCK_NOSPACE.
Let's drop the first and always relay on the latter, dropping a bunch
of useless code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fuzzers and static checkers might not detect when mptcp_sk() is used
with a non mptcp_sock structure.
This is similar to the parent commit, where it is easy to use mptcp_sk()
with a TCP sock, e.g. with a subflow sk.
So a new simple check is done when CONFIG_DEBUG_NET is enabled to tell
kernel devs when a non-MPTCP socket is being used as an MPTCP one.
'mptcp_sk()' macro is then defined differently: with an extra WARN to
complain when an unexpected socket is being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-4-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fuzzers and static checkers might not detect when tcp_sk() is used with
a non tcp_sock structure.
This kind of mistake already happened a few times with MPTCP: when
wrongly using TCP-specific helpers with mptcp_sock pointers. On the
other hand, there are many 'tcp_xxx()' helpers that are taking a 'struct
sock' pointer as arguments, and some of them are only looking at fields
from 'struct sock', and nothing from 'struct tcp_sock'. It is then
tempting to use them with a 'struct mptcp_sock'.
So a new simple check is done when CONFIG_DEBUG_NET is enabled to tell
kernel devs when a non-TCP socket is being used as a TCP one. 'tcp_sk()'
macro is then re-defined to add a WARN when an unexpected socket is
being used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-3-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As it would be done when initiating an MPTCP sock.
This is not strictly needed for this test, but it will be when a later
patch will check if the right protocol is being used when calling
mptcp_sk().
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-next-20240223-misc-improvements-v1-2-b6c8a10396bd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when MPTCP server accepts an incoming connection, it clones its listener
socket. However, the pointer to 'inet_opt' for the new socket has the same
value as the original one: as a consequence, on program exit it's possible
to observe the following splat:
BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0
Free of addr ffff888485950880 by task swapper/25/0
CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
print_report+0xca/0x620
kasan_report_invalid_free+0x64/0x90
__kasan_slab_free+0x1aa/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
rcu_do_batch+0x34e/0xd90
rcu_core+0x559/0xac0
__do_softirq+0x183/0x5a4
irq_exit_rcu+0x12d/0x170
sysvec_apic_timer_interrupt+0x6b/0x80
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:cpuidle_enter_state+0x175/0x300
Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b
RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000
RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588
RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080
R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0
R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80
cpuidle_enter+0x4a/0xa0
do_idle+0x310/0x410
cpu_startup_entry+0x51/0x60
start_secondary+0x211/0x270
secondary_startup_64_no_verify+0x184/0x18b
</TASK>
Allocated by task 6853:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0xa6/0xb0
__kmalloc+0x1eb/0x450
cipso_v4_sock_setattr+0x96/0x360
netlbl_sock_setattr+0x132/0x1f0
selinux_netlbl_socket_post_create+0x6c/0x110
selinux_socket_post_create+0x37b/0x7f0
security_socket_post_create+0x63/0xb0
__sock_create+0x305/0x450
__sys_socket_create.part.23+0xbd/0x130
__sys_socket+0x37/0xb0
__x64_sys_socket+0x6f/0xb0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 6858:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x12c/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
subflow_ulp_release+0x1f0/0x250
tcp_cleanup_ulp+0x6e/0x110
tcp_v4_destroy_sock+0x5a/0x3a0
inet_csk_destroy_sock+0x135/0x390
tcp_fin+0x416/0x5c0
tcp_data_queue+0x1bc8/0x4310
tcp_rcv_state_process+0x15a3/0x47b0
tcp_v4_do_rcv+0x2c1/0x990
tcp_v4_rcv+0x41fb/0x5ed0
ip_protocol_deliver_rcu+0x6d/0x9f0
ip_local_deliver_finish+0x278/0x360
ip_local_deliver+0x182/0x2c0
ip_rcv+0xb5/0x1c0
__netif_receive_skb_one_core+0x16e/0x1b0
process_backlog+0x1e3/0x650
__napi_poll+0xa6/0x500
net_rx_action+0x740/0xbb0
__do_softirq+0x183/0x5a4
The buggy address belongs to the object at ffff888485950880
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
64-byte region [ffff888485950880, ffff8884859508c0)
The buggy address belongs to the physical page:
page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950
flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006
raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc
Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix
this by duplicating IP / IPv6 options after clone, so that
ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice.
Fixes: cf7da0d66c ("mptcp: Create SUBFLOW socket for incoming connections")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the blamed commit below, the send buffer auto-tuning can
happen after that the mptcp_propagate_sndbuf() completes - via
the delegated action infrastructure.
We must check for write space even after such change or we risk
missing the wake-up event.
Fixes: 8005184fd1 ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-6-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when inserting not contiguous data in the subflow write queue,
the protocol creates a new skb and prevent the TCP stack from
merging it later with already queued skbs by setting the EOR marker.
Still no push flag is explicitly set at the end of previous GSO
packet, making the aggregation on the receiver side sub-optimal -
and packetdrill self-tests less predictable.
Explicitly mark the end of not contiguous DSS with the push flag.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the 'Fixes' commit mentioned below, the client side might print
the following warning once when a subflow is fully established at the
reception of any valid additional ack:
MPTCP: bogus mpc option on established client sk
That's a normal situation, and no warning should be printed for that. We
can then skip the check when the label is used.
Fixes: e4a0fa47e8 ("mptcp: corner case locking for rx path fields initialization")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address family of server side mismatches with that of client side, like
in "userspace pm add & remove address" test:
userspace_pm_add_addr $ns1 10.0.2.1 10
userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED
That's because on the server side, the family is set to AF_INET6 and the
v4 address is mapped in a v6 one.
This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before
checking local address family with remote address family, map an IPv4
address to an IPv6 address if the pair is a v4-mapped address.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-1-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
