Remove Intel Thunder Bay specific code as the product got cancelled and
there are no end customers or users.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20231213060836.29203-3-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove Intel Thunder Bay specific code as the product got cancelled and
there are no end customers or users.
Signed-off-by: Nandhini Srikandan <nandhini.srikandan@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20231213060836.29203-2-nandhini.srikandan@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Documentation says only DTDL of 200 is allowed for this SoC.
Fixes: 4286db8456f4 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://msgid.link/r/20231212081239.14254-1-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Nam Cao <namcao@linutronix.de>:
The driver was refactored in 9b2ef250b31d ("spi: spl022: switch to use
default spi_transfer_one_message()"), and some variables are now unused
because of that. Clean them up.
Since linux/of_platform.h had included linux/platform_device.h
and since that inclusion was removed, this driver now needs to include
the latter header file explicitly to prevent build errors:
drivers/spi/spi-mpc52xx.c: In function 'mpc52xx_spi_probe':
drivers/spi/spi-mpc52xx.c:396:20: error: invalid use of undefined type 'struct platform_device'
and more like that.
Fixes: 0d18bcdebb2f ("of: Stop circularly including of_device.h and of_platform.h")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Link: https://lore.kernel.org/r/20231208185927.14124-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>:
This patch series adds support to the SPI framework for using multiple
chip selects.
AMD-Xilinx GQSPI controller has two advanced mode that allows the
controller to consider two flashes as one single device.
One of these two mode is the parallel mode in which each byte of data is
stored in both devices, the even bits in the lower flash & the odd bits in
the upper flash. The byte split is automatically handled by the QSPI
controller.
The other mode is the stacked mode in which both the flashes share the
same SPI bus but each of the device contain half of the data. In this mode,
the controller does not follow CS requests but instead internally wires the
two CS levels with the value of the most significant address bit.
For supporting both these modes SPI core need to be updated for providing
multiple CS for a single SPI device.
For adding multi CS support the SPI device need to be aware of all the CS
values. So, the "chip_select" member in the spi_device structure is now an
array that holds all the CS values.
spi_device structure now has a "cs_index_mask" member. This acts as an
index to the chip_select array. If nth bit of spi->cs_index_mask is set
then the driver would assert spi->chip_select[n].
In parallel mode all the chip selects are asserted/de-asserted
simultaneously and each byte of data is stored in both devices, the even
bits in one, the odd bits in the other. The split is automatically handled
by the GQSPI controller. The GQSPI controller supports a maximum of two
flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is
added in the spi controller flags, through ctlr->flags the spi core
will make sure that the controller is capable of handling multiple chip
selects at once.
For supporting multiple CS via GPIO the cs_gpiod member of the spi_device
structure is now an array that holds the gpio descriptor for each
chipselect.
CS GPIO is not tested on our hardware, but it has been tested by @Stefan
https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Tested-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for adding multiple CS support for a device, set/get
functions were introduces accessing spi->chip_select in
'commit 303feb3cc06a ("spi: Add APIs in spi core to set/get
spi->chip_select and spi->cs_gpiod")'.
Replace spi->chip_select with spi_get_chipselect() API.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20231125092137.2948-3-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for adding multiple CS support for a device, set/get
functions were introduces accessing spi->chip_select in
'commit 303feb3cc06a ("spi: Add APIs in spi core to set/get
spi->chip_select and spi->cs_gpiod")'.
Replace spi->chip_select with spi_get_chipselect() API.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20231125092137.2948-2-amit.kumar-mahapatra@amd.com
Signed-off-by: Lee Jones <lee@kernel.org>
Merge series from David Lechner <dlechner@baylibre.com>:
We are working towards adding support for the offload feature [1] of the
AXI SPI Engine IP core. Before we can do that, we want to make some
general fixes and improvements to the driver. In order to avoid a giant
series with 35+ patches, we are splitting this up into a few smaller
series.
This is a continuation of the work started in [2] which has been applied
to spi/for-6.8 [3]. This series must be applied on top of that series to
apply cleanly.
Once this series is applied, we will follow up with the 3rd series that
implements the offload support. The offload support will also involve
the IIO subsystem (a new IIO driver will depend on the new SPI offload
feature), so I'm mentioning this now in case we want to do anything
ahead of time to prepare for that (e.g. putting all of these changes on
a separate branch).
[1]: https://wiki.analog.com/resources/fpga/peripherals/spi_engine/offload
[2]: https://lore.kernel.org/linux-spi/20231117-axi-spi-engine-series-1-v1-0-cc59db999b87@baylibre.com/
[3]: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git/log/?h=for-6.8
If there is an issue with the AXI SPI Engine hardware a scheduled
transfer might never be completed and spi_sync() will block forever.
This due to the uninterruptible wait for completion waiting for the
spi_finalize_current_message() that never comes.
Add a watchdog timer that will abort a transfer 5 seconds after it has
been started. This will potentially leave the hardware in a broken state
but it allows software to recover and allow to better diagnose the
underlying issue.
Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-9-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the AXI SPI Engine driver has support for the various CS delays
requested through struct spi_message, we don't need to add a separate
delay to the CS assertion instruction. Otherwise, we end up with longer
than requested delays.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-8-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This modifies the ADI AXI SPI Engine driver to restore the clkdiv
configuration register at the end of a SPI message. Having the clkdiv in
a known state is needed to be able to add a new command in the future
that only performs a delay without any SPI transfers. Furthermore having
that state be the smallest possible divider will allow these delays to
have the highest possible precision.
Changing the initial value of clk_div from -1 to 1 is now possible
because we know the function will always be called with a known clkdiv
config register state. Making this change will also have the effect of
not emitting a clkdiv configuration register instruction in cases where
the maximum sclk rate is used. Having one less instruction to process
reduces delays on the bus which will be beneficial when we implement
offload support to enable reading data from devices at very high rates.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-7-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds handling of xfer->cs_change_delay to the AXI SPI Engine
driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-6-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This replaces the xfer parameter of spi_engine_gen_sleep() in the AXI
SPI Engine driver with parameters for the delay in nanoseconds and the
SPI SCLK rate. This will allow this function to be used by callers in
the future that do not have a spi_transfer struct.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-5-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the sleep ticks calculation when generating sleep
instructions in the AXI SPI Engine driver. The previous calculation
was ignoring delays less than one microsecond and missed a microsecond
to second conversion factor.
This fixes the first issue by not rounding to microseconds. Now that
xfer->effective_speed_hz is guaranteed to be set correctly, we can use
that to simplify the calculation. This new calculation replaces the old
incorrect math.
Also add unit suffix to the delay variable for clarity while we are
touching this.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-4-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that host->max_speed_hz and xfer->effective_speed_hz are properly
set, we can use them instead of having to do more complex calculations
to get the clock divider for each transfer.
This removes the spi_engine_get_clk_div() function and replaces it with
just dividing the two clock rates. Since the hardware register value is
the divider minus one, we need to subtract one. Subtracting one was
previously done in the spi_engine_get_clk_div() function.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-3-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds a new spi_engine_precompile_message() function to the ADI AXI
SPI Engine driver to populate the xfer->effective_speed_hz field since
the SPI core doesn't/can't do this for us.
This driver is already using spi_delay_to_ns() which depends on
effective_speed_hz to get an accurate value in some cases.
Having an effective_speed_hz value can also be used in future changes
to simplify other code.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231204-axi-spi-engine-series-2-v1-2-063672323fce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
