- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada).
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki).
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson).
- Several OF related cleanups in cpufreq drivers (Rob Herring).
- Enable COMPILE_TEST for ARM drivers (Rob Herrring).
- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole, Nishanth Menon).
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar).
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing).
- Make amd-pstate validate return of any attempt to update EPP limits,
which fixes the masking hardware problems (Mario Limonciello).
- Move the calculation of the AMD boost numerator outside of amd-pstate,
correcting acpi-cpufreq on systems with preferred cores (Mario
Limonciello).
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello).
- Add extra unit test coverage for mode state machine (Mario
Limonciello).
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu).
- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy).
- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng).
- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver (Krzysztof
Kozlowski).
- Remove dead code from cpuidle_enter_state() (Dhruva Gole).
- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter).
- Fix off by one in get_rpi() in the intel_rapl power capping
driver (Dan Carpenter).
- Add support for ArrowLake-U to the intel_rapl power capping
driver (Sumeet Pawnikar).
- Fix the energy-pkg event for AMD CPUs in the intel_rapl power capping
driver (Dhananjay Ugwekar).
- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar).
- Remove unused stub for saveable_highmem_page() and remove deprecated
macros from power management documentation (Andy Shevchenko).
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo).
- Update the maintainers information for the operating-points-v2-ti-cpu DT
binding (Dhruva Gole).
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring).
- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson).
- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon).
- Use of_property_present() instead of of_get_property() in the imx-bus
devfreq driver (Rob Herring).
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin).
- Make cpupower display residency value in idle-info (Aboorva
Devarajan).
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV).
- Add SWIG support to cpupower (John B. Wyatt IV).
-----BEGIN PGP SIGNATURE-----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=JM+K
-----END PGP SIGNATURE-----
Merge tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.
As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.
Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.
Specifics:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)
- Several OF related cleanups in cpufreq drivers (Rob Herring)
- Enable COMPILE_TEST for ARM drivers (Rob Herrring)
- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)
- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)
- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)
- Add extra unit test coverage for mode state machine (Mario
Limonciello)
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)
- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)
- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)
- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)
- Remove dead code from cpuidle_enter_state() (Dhruva Gole)
- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)
- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)
- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)
- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)
- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)
- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)
- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)
- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)
- Make cpupower display residency value in idle-info (Aboorva
Devarajan)
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)
- Add SWIG support to cpupower (John B. Wyatt IV)"
* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...
ACPI:
* Enable PMCG erratum workaround for HiSilicon HIP10 and 11 platforms.
* Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
* Enable workaround for hardware access/dirty issue on Ampere-1A cores.
Memory management:
* Define PHYSMEM_END to fix a crash in the amdgpu driver.
* Avoid tripping over invalid kernel mappings on the kexec() path.
* Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
* Add support for the "fixed instruction counter" extension in the CPU
PMU architecture.
* Extend and fix the event encodings for Apple's M1 CPU PMU.
* Allow LSM hooks to decide on SPE permissions for physical profiling.
* Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
* Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
* Fix vector length issues in the SVE/SME sigreturn tests
* Fix build warning in the ptrace tests.
Timers:
* Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
* Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
* Minor fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmbkVNEQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKeIB/9YtbN7JMgsXktM94GP03r3tlFF36Y1S51S
+zdDZclAVZCTCZN+PaFeAZ/+ah2EQYrY6rtDoHUSEMQdF9kH+ycuIPDTwaJ4Qkam
QKXMpAgtY/4yf2rX4lhDF8rEvkhLDsu7oGDhqUZQsA33GrMBHfgA3oqpYwlVjvGq
gkm7olTo9LdWAxkPpnjGrjB6Mv5Dq8dJRhW+0Q5AntI5zx3RdYGJZA9GUSzyYCCt
FIYOtMmWPkQ0kKxIVxOxAOm/ubhfyCs2sjSfkaa3vtvtt+Yjye1Xd81rFciIbPgP
QlK/Mes2kBZmjhkeus8guLI5Vi7tx3DQMkNqLXkHAAzOoC4oConE
=6osL
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
configurations and scenarios where the mitigations code is irrelevant
- Other small fixlets and improvements
-----BEGIN PGP SIGNATURE-----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=GFld
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- Add CONFIG_ option for every hw CPU mitigation. The intent is to
support configurations and scenarios where the mitigations code is
irrelevant
- Other small fixlets and improvements
* tag 'x86_bugs_for_v6.12_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix handling when SRSO mitigation is disabled
x86/bugs: Add missing NO_SSB flag
Documentation/srso: Document a method for checking safe RET operates properly
x86/bugs: Add a separate config for GDS
x86/bugs: Remove GDS Force Kconfig option
x86/bugs: Add a separate config for SSB
x86/bugs: Add a separate config for Spectre V2
x86/bugs: Add a separate config for SRBDS
x86/bugs: Add a separate config for Spectre v1
x86/bugs: Add a separate config for RETBLEED
x86/bugs: Add a separate config for L1TF
x86/bugs: Add a separate config for MMIO Stable Data
x86/bugs: Add a separate config for TAA
x86/bugs: Add a separate config for MDS
Alexandre Ghiti <alexghiti@rivosinc.com> says:
In RISC-V, after a new mapping is established, a sfence.vma needs to be
emitted for different reasons:
- if the uarch caches invalid entries, we need to invalidate it otherwise
we would trap on this invalid entry,
- if the uarch does not cache invalid entries, a reordered access could fail
to see the new mapping and then trap (sfence.vma acts as a fence).
We can actually avoid emitting those (mostly) useless and costly sfence.vma
by handling the traps instead:
- for new kernel mappings: only vmalloc mappings need to be taken care of,
other new mapping are rare and already emit the required sfence.vma if
needed.
That must be achieved very early in the exception path as explained in
patch 3, and this also fixes our fragile way of dealing with vmalloc faults.
- for new user mappings: Svvptc makes update_mmu_cache() a no-op but we can
take some gratuitous page faults (which are very unlikely though).
Patch 1 and 2 introduce Svvptc extension probing.
On our uarch that does not cache invalid entries and a 6.5 kernel, the
gains are measurable:
* Kernel boot: 6%
* ltp - mmapstress01: 8%
* lmbench - lat_pagefault: 20%
* lmbench - lat_mmap: 5%
Here are the corresponding numbers of sfence.vma emitted:
* Ubuntu boot to login:
Before: ~630k sfence.vma
After: ~200k sfence.vma
* ltp - mmapstress01
Before: ~45k
After: ~6.3k
* lmbench - lat_pagefault
Before: ~665k
After: 832 (!)
* lmbench - lat_mmap
Before: ~546k
After: 718 (!)
Thanks to Ved and Matt Evans for triggering the discussion that led to
this patchset!
* b4-shazam-merge:
riscv: Stop emitting preventive sfence.vma for new userspace mappings with Svvptc
riscv: Stop emitting preventive sfence.vma for new vmalloc mappings
dt-bindings: riscv: Add Svvptc ISA extension description
riscv: Add ISA extension parsing for Svvptc
Link: https://lore.kernel.org/r/20240717060125.139416-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add description for the Svvptc ISA extension which was ratified recently.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240717060125.139416-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmbko34ACgkQJNaLcl1U
h9CQiwf9HseC6VkNQ0ISVZ2UsSf8K/HsHsdBGl7/CRr0SEvS3pszYMkKPbhRggsF
aQ4nfitXeN7Vo6S0tNXx63wzjpMPkjrHdV0XY+WJxfuCaeb3DHFEJ4uvlgv53aoh
M+wz1aldvKWjDPwhkzcJEaneQ36U7OlUSBsbFHR82dBDguEm+h29tAxTuLlwL5Zb
M8NuSfbh0cfY9Kk1cPGsqaHD8wjUeg6/Q5qnbDg2kAm0aF1fAxfyFKRX6Z5s9ekd
LeU3EIdRbI8UlHv7Afl0UKDYtYqL1ubwmjDb45HnsE4FmNEmDEbf8c1adRumZAjm
Js9yzswiaaHAvotCaEstFC6HYUL+oQ==
=jugn
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
Commit 8ca924aeb4 ("Documentation/barriers: Remove references to
[smp_]read_barrier_depends()") removed the entire section of "CACHE
COHERENCY", without getting rid of its traces.
Remove them.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Fix a missing end of phrase in the documentation. It describes the
ETHTOOL_A_C33_PSE_ACTUAL_PW attribute, which was not fully explained.
Also, fix grammar issues by using simple present tense instead of
present continuous.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240912090550.743174-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
-----BEGIN PGP SIGNATURE-----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=ZAan
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/20240912214317.3054060-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to
dedicated schema") incorrectly removed 'vddpe-3v3-supply' from the
bindings, which results in DT checker warnings like:
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dtb: pcie@600000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
Note that this property has been part of the Qualcomm PCIe bindings since
2018 and would need to be deprecated rather than simply removed if there is
a desire to replace it with 'vpcie3v3' which is used for some non-Qualcomm
controllers.
Link: https://lore.kernel.org/lkml/Zp_LPixNnh-2Fy5N@hovoldconsulting.com/
Fixes: 756485bfbb ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema")
Link: https://lore.kernel.org/r/20240723151328.684-1-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
"nvidia,tegra186-ccplex-cluster" is also documented in
arm/tegra/nvidia,tegra-ccplex-cluster.yaml. As it covers Tegra234 as
well, drop nvidia,tegra186-ccplex-cluster.yaml.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240910234422.1042486-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The compatible strings for mt6795 clocks are also documented in other
schemas:
"mediatek,mt6795-apmixedsys" in clock/mediatek,apmixedsys.yaml
"mediatek,mt6795-topckgen" in clock/mediatek,topckgen.yaml
"mediatek,mt6795-pericfg" in clock/mediatek,pericfg.yaml
"mediatek,mt6795-infracfg" in clock/mediatek,infracfg.yaml
The only difference is #reset-cells is not allowed in some of these,
but that aligns with actual users in .dts files.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240910234238.1028422-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
"make dtbs_check":
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,shutdown' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,output-enable-active' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
Versaclock 5 clock generators can have their configuration stored in
One-Time Programmable (OTP) memory. Hence there is no need to specify
DT properties for manual configuration if the OTP has been programmed
before. Likewise, the Linux driver does not touch the SD/OE bits if the
corresponding properties are not specified, cfr. commit d83e561d43
("clk: vc5: Add properties for configuring SD/OE behavior").
Reflect this in the bindings by making the "idt,shutdown" and
"idt,output-enable-active" properties not required, just like the
various "idt,*" properties in the per-output child nodes.
Fixes: 275e4e2dc0 ("dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/68037ad181991fe0b792f6d003e3e9e538d5ffd7.1673452118.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a compatible for the SA8255p platform's KPSS watchdog.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240910165926.2408630-1-quic_nkela@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add an entry to fsl,imx8qm-irqsteer.
This fixes the following dt-schema warning:
failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240701204106.160128-1-festevam@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
LPC32XX SoCs use pl080 dma controller which have few request signals
multiplexed between peripherals. This binding describes how devices can
use the multiplexed request signals.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627150046.258795-3-piotr.wojtaszczyk@timesys.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The correct vendor prefix for Analog Devices is "adi", not "ad". Both
forms are in use. Add the "adi,ad7414" version and deprecate the
"ad,ad7414" version.
Keep them together even though it breaks strict alphabetical ordering.
Link: https://lore.kernel.org/r/20240903-dt-trivial-devices-v1-2-ad684c754b9c@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
"at,24c08" does not have a correct vendor prefix. The correct compatible
string would be "atmel,24c08" which is already documented in at24.yaml.
It is also unused anywhere, so just drop it.
"st,24c256" is already documented in at24.yaml, so drop it as well.
Link: https://lore.kernel.org/r/20240903-dt-trivial-devices-v1-1-ad684c754b9c@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
commit 53ed3233e6 ("dt-bindings: input: qcom,pm8921-keypad: convert to
YAML format") resulted in a renaming of the output .txt file from
qcom,pm8xxx-keypad.txt to qcom,pm8921-keypad.yaml.
This patch makes a corresponding update to the link to that .txt file
in wakeup-source.txt.
Flagged by make htmldocs:
Warning: Documentation/devicetree/bindings/power/wakeup-source.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240908-keypad-wakeup-ref-v1-1-762e4641468a@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible for pdc interrupt controller representing support on
SA8255p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240905191510.3775179-1-quic_nkela@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
devm_hwmon_device_unregister() has no in-tree user, and its implementation
is wrong since it does not pass the to-be-removed hardware monitoring
device as parameter. I do not envision a valid use for it; drivers needing
it should not have called devm_hwmon_device_register_with_info() in the
first place. Remove it.
Reported-by: Matthew Sanders <m@ttsande.rs>
Closes: https://lore.kernel.org/linux-hwmon/488b3bdf870ea76c4b943dbe5fd15ac8113019dc.camel@kernel.org/
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
- Add support for a new Goodix HID over SPI driver (Charles Wang)
Note: this driver doesn't rely on the spefication of HID over SPI
provided by Microsoft, thus needs a separate driver, not a generic bus
transport low level driver.
Add reg-name: "dbi2", "atu" for i.MX8M PCIe Endpoint.
For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.
In commit b7d67c6130 ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8M PCIe EP.
These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.
Link: https://lore.kernel.org/linux-pci/1723534943-28499-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Convert the devicetree bindings for the Altera PCIe MSI controller
from text to YAML.
Link: https://lore.kernel.org/linux-pci/20240717181756.2177553-1-matthew.gerlach@linux.intel.com
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
[kwilczynski: remove unused msi0 label]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Document SA8255p compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When SHAMPO can't identify the protocol/header of a packet, it will
yield a packet that is not split - all the packet is in the data part.
Count this value in packets and bytes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240911201757.1505453-15-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ENA Express metrics, called `ena_srd` are exposed to
customers via `ethtool`.
The metrics allow customers to check the configuration
(mode), tx/rx counters as well as resource utilization.
The documentation is also updated to provide a general
explanation about ENA Express as well as links for further
information about metrics and configurations.
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb2 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
*think* such fix will not land in the next week.
Including fixes from netfilter.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=tbcX
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a recently notified BT regression with no fix yet. I do not
think a fix will land in the next week.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in
nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"
* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
net: libwx: fix number of Rx and Tx descriptors
net: dsa: felix: ignore pending status of TAS module when it's disabled
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
selftests: mptcp: include net_helper.sh file
selftests: mptcp: include lib.sh file
selftests: mptcp: join: restrict fullmesh endp on 1st sf
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
dt-bindings: net: tja11xx: fix the broken binding
selftests: net: csum: Fix checksums for packets with non-zero padding
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
virtio_net: disable premapped mode by default
Revert "virtio_net: big mode skip the unmap check"
Revert "virtio_net: rx remove premapped failover code"
...
Add a description of the VDE vector transport in user_mode_linux_howto_v2.rst.
Signed-off-by: Renzo Davoli <renzo@cs.unibo.it>
Signed-off-by: Renzo Davoi <renzo@cs.unibo.it>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
* for-next/poe: (31 commits)
arm64: pkeys: remove redundant WARN
kselftest/arm64: Add test case for POR_EL0 signal frame records
kselftest/arm64: parse POE_MAGIC in a signal frame
kselftest/arm64: add HWCAP test for FEAT_S1POE
selftests: mm: make protection_keys test work on arm64
selftests: mm: move fpregs printing
kselftest/arm64: move get_header()
arm64: add Permission Overlay Extension Kconfig
arm64: enable PKEY support for CPUs with S1POE
arm64: enable POE and PIE to coexist
arm64/ptrace: add support for FEAT_POE
arm64: add POE signal support
arm64: implement PKEYS support
arm64: add pte_access_permitted_no_overlay()
arm64: handle PKEY/POE faults
arm64: mask out POIndex when modifying a PTE
arm64: convert protection key into vm_flags and pgprot values
arm64: add POIndex defines
arm64: re-order MTE VM_ flags
arm64: enable the Permission Overlay Extension for EL0
...
* for-next/pkvm-guest:
arm64: smccc: Reserve block of KVM "vendor" services for pKVM hypercalls
drivers/virt: pkvm: Intercept ioremap using pKVM MMIO_GUARD hypercall
arm64: mm: Add confidential computing hook to ioremap_prot()
drivers/virt: pkvm: Hook up mem_encrypt API using pKVM hypercalls
arm64: mm: Add top-level dispatcher for internal mem_encrypt API
drivers/virt: pkvm: Add initial support for running as a protected guest
firmware/smccc: Call arch-specific hook on discovering KVM services
Qualcomm QCS8300 SoC includes apps smmu that implements arm,mmu-500, which
is used to translate device-visible virtual addresses to physical
addresses. Add compatible for it.
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20240911-qcs8300_smmu_binding-v2-1-f53dd9c047ba@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
bootloader-backdoor-gpio (along with reset-gpio) is used to enable
bootloader backdoor for flashing new firmware.
The pin and pin level to enable bootloader backdoor is configured using
the following CCFG variables in cc1352p7:
- SET_CCFG_BL_CONFIG_BL_PIN_NO
- SET_CCFG_BL_CONFIG_BL_LEVEL
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240903-beagleplay_fw_upgrade-v4-1-526fc62204a7@beagleboard.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet
PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller
(MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible
with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver
integrated into the LAN8650/1. The communication between the Host and the
MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial
Interface (TC6).
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-15-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IEEE 802.3cg project defines two 10 Mbit/s PHYs operating over a
single pair of conductors. The 10BASE-T1L (Clause 146) is a long reach
PHY supporting full duplex point-to-point operation over 1 km of single
balanced pair of conductors. The 10BASE-T1S (Clause 147) is a short reach
PHY supporting full / half duplex point-to-point operation over 15 m of
single balanced pair of conductors, or half duplex multidrop bus
operation over 25 m of single balanced pair of conductors.
Furthermore, the IEEE 802.3cg project defines the new Physical Layer
Collision Avoidance (PLCA) Reconciliation Sublayer (Clause 148) meant to
provide improved determinism to the CSMA/CD media access method. PLCA
works in conjunction with the 10BASE-T1S PHY operating in multidrop mode.
The aforementioned PHYs are intended to cover the low-speed / low-cost
applications in industrial and automotive environment. The large number
of pins (16) required by the MII interface, which is specified by the
IEEE 802.3 in Clause 22, is one of the major cost factors that need to be
addressed to fulfil this objective.
The MAC-PHY solution integrates an IEEE Clause 4 MAC and a 10BASE-T1x PHY
exposing a low pin count Serial Peripheral Interface (SPI) to the host
microcontroller. This also enables the addition of Ethernet functionality
to existing low-end microcontrollers which do not integrate a MAC
controller.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Link: https://patch.msgid.link/20240909082514.262942-2-Parthiban.Veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation outlining the usage and details of devmem TCP.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240910171458.219195-12-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.
The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.
We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.
The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.
The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.
The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
API takes the dma-buf fd as input, and binds it to the netdevice. The
user can specify the rx queues to bind the dma-buf to.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP port attribute is in host endianness, but was documented
as big-endian in the ynl specification.
Below are two examples from net/mptcp/pm_netlink.c showing that the
attribute is converted to/from host endianness for use with netlink.
Import from netlink:
addr->port = htons(nla_get_u16(tb[MPTCP_PM_ADDR_ATTR_PORT]))
Export to netlink:
nla_put_u16(skb, MPTCP_PM_ADDR_ATTR_PORT, ntohs(addr->port))
Where addr->port is defined as __be16.
No functional change intended.
Fixes: bc8aeb2045 ("Documentation: netlink: add a YAML spec for mptcp")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240911091003.1112179-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An MPTCP firewall blackhole can be detected if the following SYN
retransmission after a fallback to "plain" TCP is accepted.
In case of blackhole, a similar technique to the one in place with TFO
is now used: MPTCP can be disabled for a certain period of time, 1h by
default. This time period will grow exponentially when more blackhole
issues get detected right after MPTCP is re-enabled and will reset to
the initial value when the blackhole issue goes away.
The blackhole period can be modified thanks to a new sysctl knob:
blackhole_timeout. Two new MIB counters help understanding what's
happening:
- 'Blackhole', incremented when a blackhole is detected.
- 'MPCapableSYNTXDisabled', incremented when an MPTCP connection
directly falls back to TCP during the blackhole period.
Because the technique is inspired by the one used by TFO, an important
part of the new code is similar to what can find in tcp_fastopen.c, with
some adaptations to the MPTCP case.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/57
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-3-da7ebb4cd2a3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several compatibles documented in trivial-rtc.yaml are documented
elsewhere and are not trivial, so drop them.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240910234431.1043923-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the Spreadtrum SC2731 RTC bindings to DT schema.
Rename file to match compatible.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ZolsyEC8eeJWNIb6@standask-GA-A55M-S2HP
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Make the values of the symbolic constants that define the valid linkages
for functions and variables explicit.
Signed-off-by: Will Hawkins <hawkinsw@obs.cr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240911055033.2084881-1-hawkinsw@obs.cr
Pull in tip/sched/core to resolve two merge conflicts:
- 96fd6c65ef ("sched: Factor out update_other_load_avgs() from __update_blocked_others()")
5d871a6399 ("sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c")
A simple context conflict. The former added __update_blocked_others() in
the same #ifdef CONFIG_SMP block that effective_cpu_util() and
sched_cpu_util() are in and the latter moved those functions to fair.c.
This makes __update_blocked_others() more out of place. Will follow up
with a patch to relocate.
- 96fd6c65ef ("sched: Factor out update_other_load_avgs() from __update_blocked_others()")
84d265281d ("sched/pelt: Use rq_clock_task() for hw_pressure")
The former factored out the body of __update_blocked_others() into
update_other_load_avgs(). The latter changed how update_hw_load_avg() is
called in the body. Resolved by applying the change to
update_other_load_avgs() instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match
the binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure
application firmware driver
-----BEGIN PGP SIGNATURE-----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=Waa0
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Merge updates related to system sleep, operating performance points
(OPP) updates, and PM tooling updates for 6.12-rc1:
- Remove unused stub for saveable_highmem_page() and remove deprecated
macros from power management documentation (Andy Shevchenko).
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo).
- Update the maintainers information for the operating-points-v2-ti-cpu DT
binding (Dhruva Gole).
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring).
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin).
- Make cpupower display residency value in idle-info (Aboorva
Devarajan).
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV).
- Add SWIG support to cpupower (John B. Wyatt IV).
* pm-sleep:
PM: hibernate: Remove unused stub for saveable_highmem_page()
Documentation: PM: Discourage use of deprecated macros
PM: sleep: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PM: hibernate: Use sysfs_emit() and sysfs_emit_at() in "show" functions
* pm-opp:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
* pm-tools:
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
pm-graph: Update directory handling and installation process in Makefile
pm-graph: Make git ignore sleepgraph.py artifacts
tools/cpupower: display residency value in idle-info
Merge cpufreq updates for 6.12-rc1:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef).
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada).
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki).
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson).
- Several OF related cleanups in cpufreq drivers (Rob Herring).
- Enable COMPILE_TEST for ARM drivers (Rob Herrring).
- Introduce quirks for syscon failures and use socinfo to get revision
for TI cpufreq driver (Dhruva Gole, Nishanth Menon).
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar).
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing).
- Make amd-pstate validate return of any attempt to update EPP limits,
which fixes the masking hardware problems (Mario Limonciello).
- Move the calculation of the AMD boost numerator outside of amd-pstate,
correcting acpi-cpufreq on systems with preferred cores (Mario
Limonciello).
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello).
- Add extra unit test coverage for mode state machine (Mario
Limonciello).
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang Liu).
* pm-cpufreq: (35 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
cpufreq: ti-cpufreq: Use socinfo to get revision in AM62 family
cpufreq: Fix the cacography in powernv-cpufreq.c
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
cpufreq: amd-pstate: add check for cpufreq_cpu_get's return value
...
* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine
-----BEGIN PGP SIGNATURE-----
iQJOBAABCgA4FiEECwtuSU6dXvs5GA2aLRkspiR3AnYFAmbhviEaHG1hcmlvLmxp
bW9uY2llbGxvQGFtZC5jb20ACgkQLRkspiR3AnYqDA//TrvmXcpk1mnVJw3Y7MG0
/n8dsLpxqVtEf+USnlGR+iRhgSQ/W/Kr7b5a+jmdCwpHChuWHt2FnNgcHLIxDnZC
vmEJ02/2BCRoPKvcvV4VTh0ATu3O9nqwQiBVWBdNjDy+Dzr0pzA+SQopt1hCIsO2
mzUodhpiBqYKlMf/i6+aM1gZCGGqoRC40aGqnJsgegb61vl7zIc2ZcbTxUQlyTfv
t6J73IXLx8+YtrjejBYc7mRHhMQ2hCKy92C/8cNoGocj5faSKsAA3OUDcWq8qX0U
zK3GGGdW8MLHSbt3VyntstnfiLL7TnzowcjvrMudIWpjC1987GlE9BApbN9VRZ8e
ARN3Y7/ltjut/1fRB97BwjI9aDpzA0122Qzy4UOcK8o+be1eIr+ihV3Z9EN/snWg
0L/oq5+rGHvvIzf1BwGhoPSvgBIu7eMIYDcRxKPlEiKsbXrL4DdJC/nXgaZ/HiGO
eHx1dNy7LFrdnEwVI1frZWC6ZuZcpmOBdhnfU+leVxzB3Z++Qc266rsxKBsc5taZ
PPV18pxfbbl3iL85KDIbuBUCmA0aY8WEdCKtfXpl7zlB5g0fZQLyYeUbvahK08Sk
vyQAnPECbX/4v1Vx54Z70GPk0XD2+TXdg8yApnXrmRc36z/SLdprk5hPKbKhZu/r
iPxFUnvd0HCtjsLrsq/qUiQ=
=R4HZ
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge the second round of amd-pstate changes for 6.12 from Mario
Limonciello:
"* Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
* Harden preferred core detection to avoid potential false positives
* Add extra unit test coverage for mode state machine"
* tag 'amd-pstate-v6.12-2024-09-11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
`amd_pstate_prefcore_ranking` reflects the dynamic rankings of a CPU
core based on platform conditions. Explicitly include it in the
documentation.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Explain that the sysfs file represents both preferred core being
enabled by the user and supported by the hardware.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
The special case in amd_pstate_highest_perf_set() is the value used
for calculating the boost numerator. Merge this into
amd_get_boost_ratio_numerator() and then use that to calculate boost
ratio.
This allows dropping more special casing of the highest perf value.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Update the spdifrx yaml file to reference the dai-common.yaml schema,
enabling the use of the 'sound-name-prefix' property
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240910082202.45972-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At least if rsnd is using DPCM connection on Audio-Graph-Card2,
fw_devlink might doesn't have enough information to break the cycle
(Same problem might occur with Multi-CPU/Codec or Codec2Codec).
In such case, rsnd driver will not be probed.
Add post-init-providers support to break the link cycle.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/87wmjkifob.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stephen Rothwell reported htmldocs warning when merging usb tree:
Documentation/filesystems/9p.rst:99: ERROR: Unexpected indentation.
That's because Sphinx tries rendering p9_fwd.py output as a grid table
instead.
Wrap shell commands in "USBG Example" section in literal code blocks
to fix above warning and to be in line with rest of commands in the doc.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240905184059.0f30ff9a@canb.auug.org.au/
Fixes: 673f0c3ffc ("tools: usb: p9_fwd: add usb gadget packet forwarder script")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240908113423.158352-1-bagasdotme@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chrt has SCHED_DEADLINE support so convert the example instead of
relying on a schedtool fork. While at it fix the wrong mentioning
of microseconds, it was nanoseconds for both schedtool and chrt.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240813144348.1180344-2-christian.loehle@arm.com
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
-----BEGIN PGP SIGNATURE-----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=pLbU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmbhVpEACgkQYKtH/8kJ
UifgOg//bCawzXYiC7XzS2v1KJAayVfW8D02Ff70c1YQnn89cUcJx1gUbMG49Cdh
UXBFnSikZvsGiiij136niLSjByL1K7hEvfetpPAd1+/2jOEi8Sbg6csfwTUkP5jl
fIUKsbLuPwRbiT/48Bpgpvx+zGlAGHNU/fB4VAq0FEIZzUxppL8eR4bZY9rVq1yk
oPxHrHVNcV1WPibzm4r3ENINWgjXb736MrvZ03EJ57Q5Mu4XULALUMFjEXoybH2k
922QZpPK2sgHIxljgKff3CuaHfukgXgAN2rSBARjNOTcAAdg6YGPtzS9uKoFzJ2U
qKKr/L4VJlqRKqtskfRMK+DZs0VEK2eahN/dTP2pYNdtpEpLSM50fv/sBTAGwhJe
nGalBhARUie1IVloBazMTpdSIbYteBtB+BHbjEFGyblEJADVCFGSx9LDFP2x96QE
X+HFeG/r8+BOnx8vFtn6rvM3lpmSxZZ9OPeQWEcCYms31XN/F4MzlhjYA9mvia5m
//l+IPE8myaHd8JoNJLqUtvk3Y8IBhjkXg3Qlxhq3bbakssmdK0zrmhyY3EjB2RR
Sg/pGf0PnDYL4ppDWixREeIDty2MMW1GXR0YwoVPNJxWLFB81rRsAjsLRRxIQTQt
pt1677g1swERmZF0e8/lH4QEwuyyLPjJ5TTUp0DoGzuaAF85tPg=
=S1tP
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/20240906180643.2275460-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We need to introduce a valid block ratio threshold not to trigger
excessive GC for zoned deivces. The initial value of it is 95%. So, F2FS
will stop the thread from intiating GC for sections having valid blocks
exceeding the ratio.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Added control knobs for gc_no_zoned_gc_percent and
gc_boost_zoned_gc_percent.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For the fine tuning of GC behavior, add reserved_segments sysfs node.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can control the scanning window granularity for GC migration. For
more frequent scanning and GC on zoned devices, we need a fine grained
control knob for it.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
The patches are:
[patch 01/15] net/mlx5: Added missing mlx5_ifc definition for HW Steering
[patch 02/15] net/mlx5: Added missing definitions in preparation for HW Steering
[patch 03/15] net/mlx5: HWS, added actions handling
[patch 04/15] net/mlx5: HWS, added tables handling
[patch 05/15] net/mlx5: HWS, added rules handling
[patch 06/15] net/mlx5: HWS, added definers handling
[patch 07/15] net/mlx5: HWS, added matchers functionality
[patch 08/15] net/mlx5: HWS, added FW commands handling
[patch 09/15] net/mlx5: HWS, added modify header pattern and args handling
[patch 10/15] net/mlx5: HWS, added vport handling
[patch 11/15] net/mlx5: HWS, added memory management handling
[patch 12/15] net/mlx5: HWS, added backward-compatible API handling
[patch 13/15] net/mlx5: HWS, added debug dump and internal headers
[patch 14/15] net/mlx5: HWS, added send engine and context handling
[patch 15/15] net/mlx5: HWS, added API and enabled HWS support
=======================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmbfOf4ACgkQSD+KveBX
+j7hWgf/UzlKp8uyqb+7MpMWP6EgT8WUwWdpDfAr1jubIFz7e+VGaA/7QCThe89u
alcgYvIDQCGrpB/0qXY+kaKPvqOej2wPCiLU7K2JB5y20pZ/RATlFuFBZjsMzufJ
7NxzZgTPUDz+8OWK0mm0LxEJRJYoJ69gAnR0jvLGx9uSjv/f9lNICvWBaI58hkzb
HJa6sJNBiFj4EnkipxWCP0GQ4dddMkgCIVYb91FtlBA4SGZtmPS35NqQJKtGnKF3
ZhZuaTeRdw8bFDJnhbu0ur9cs4EUorZE5QBWhoHYN0zFZF4JmqCCC1HvCS7LEKaU
PgtREk20H2jPIRFwQuX05D6M4zSizg==
=AsB3
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2024-08-29
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
=======================
* tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: HWS, added API and enabled HWS support
net/mlx5: HWS, added send engine and context handling
net/mlx5: HWS, added debug dump and internal headers
net/mlx5: HWS, added backward-compatible API handling
net/mlx5: HWS, added memory management handling
net/mlx5: HWS, added vport handling
net/mlx5: HWS, added modify header pattern and args handling
net/mlx5: HWS, added FW commands handling
net/mlx5: HWS, added matchers functionality
net/mlx5: HWS, added definers handling
net/mlx5: HWS, added rules handling
net/mlx5: HWS, added tables handling
net/mlx5: HWS, added actions handling
net/mlx5: Added missing definitions in preparation for HW Steering
net/mlx5: Added missing mlx5_ifc definition for HW Steering
====================
Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "amlogic,tx-delay-ns" property schema has unnecessary type reference
as it's a standard unit suffix, and the constraints are in freeform
text rather than schema.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20240909172342.487675-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Fixes: 52b2fe4535 ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive
path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter
out rx software timestamp report, especially after a process turns on
netstamp_needed_key which can time stamp every incoming skb.
Previously, we found out if an application starts first which turns on
netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE
could also get rx timestamp. Now we handle this case by introducing this
new flag without breaking users.
Quoting Willem to explain why we need the flag:
"why a process would want to request software timestamp reporting, but
not receive software timestamp generation. The only use I see is when
the application does request
SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE."
Similarly, this new flag could also be used for hardware case where we
can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive
hardware receive timestamp.
Another thing about errqueue in this patch I have a few words to say:
In this case, we need to handle the egress path carefully, or else
reporting the tx timestamp will fail. Egress path and ingress path will
finally call sock_recv_timestamp(). We have to distinguish them.
Errqueue is a good indicator to reflect the flow direction.
Suggested-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver Changes:
- Expose fan speed via hwmon (Raag)
- Correction to Wa_14019159160 on ARL (John H)
- Whitelist COMMON_SLICE_CHICKEN1 for UMD access on DG2/MTL/ARL (Dnyaneshwar)
- Do not attempt to load the GSC multiple times to avoid hanging GSC HW (Daniele)
- Populate /sys/class/drm/cardX/engines/ even if one engine fails (Andi)
- Use kmemdup_array instead of kmemdup for multiple allocation (Yu)
- Remove extra unlikely() (Hongbo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztrfr_Wuurfa-3Rv@jlahtine-mobl.ger.corp.intel.com
Remove duplicate occurrence of 'and' in
'Linux NVMe Feature and Quirk Policy' title heading.
tested: Not breaking anything.
Signed-off-by: Shivam Chaudhary <cvam0000@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240910052737.30579-1-cvam0000@gmail.com>
Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240908183741.15352-2-dennis.lamerice@gmail.com>
Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240906204914.42698-2-dennis.lamerice@gmail.com>
Fix typo: "follow" -> "following" in pci.rst
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240906205656.8261-1-abdul.rahim@myyahoo.com>
Finish the translation of kbuild/gcc-plugins.rst and move gcc-plugins
from TODO to the main body.
Update to commit 3832d1fd84 ("docs/core-api: expand Fedora instructions
for GCC plugins")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240907070244.206808-1-dzm91@hust.edu.cn>
Fix typos in documentation.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240907122534.15998-1-algonell@gmail.com>
Signed-off-by: Dennis Lam <dennis.lamerice@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240908161928.3700-1-dennis.lamerice@gmail.com>
Describe the inputs from the PMU that the Bluetooth module on wcn6855
consumes and drop the ones from the host. This breaks the current
contract but the only two users of wcn6855 upstream - sc8280xp based
boards - will be updated in DTS patches sent separately while the
hci_qca driver will remain backwards compatible with older DT sources.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add binding document for Amlogic Bluetooth chipsets attached over UART.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Li <yang.li@amlogic.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to show firmware version information for both stored and
running firmware versions. The version and commit is displayed separately
to aid monitoring tools which only care about the version.
Example output:
# devlink dev info
pci/0000:01:00.0:
driver fbnic
serial_number 88-25-08-ff-ff-01-50-92
versions:
running:
fw 24.07.15-017
fw.commit h999784ae9df0
fw.bootloader 24.07.10-000
fw.bootloader.commit hfef3ac835ce7
stored:
fw 24.07.24-002
fw.commit hc9d14a68b3f2
fw.bootloader 24.07.22-000
fw.bootloader.commit h922f8493eb96
fw.undi 01.00.03-000
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add two new kernel command line parameters to limit the page-sizes
used for v1 page-tables:
nohugepages - Limits page-sizes to 4KiB
v2_pgsizes_only - Limits page-sizes to 4Kib/2Mib/1GiB; The
same as the sizes used with v2 page-tables
This is needed for multiple scenarios. When assigning devices to
SEV-SNP guests the IOMMU page-sizes need to match the sizes in the RMP
table, otherwise the device will not be able to access all shared
memory.
Also, some ATS devices do not work properly with arbitrary IO
page-sizes as supported by AMD-Vi, so limiting the sizes used by the
driver is a suitable workaround.
All-in-all, these parameters are only workarounds until the IOMMU core
and related APIs gather the ability to negotiate the page-sizes in a
better way.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240905072240.253313-1-joro@8bytes.org
Add support for the Watchdog Timer (WDT) hardware found in the Renesas
RZ/V2H(P) SoC to the `renesas,wdt` device tree bindings.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240829193831.80768-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
recompress device attribute supports alg=NAME parameter so that we can
specify only one particular algorithm we want to perform recompression
with. However, with algo params we now can have several exactly same
secondary algorithms but each with its own params tuning (e.g. priority 1
configured to use more aggressive level, and priority 2 configured to use
a pre-trained dictionary). Support priority=NUM parameter so that we can
correctly determine which secondary algorithm we want to use.
Link: https://lkml.kernel.org/r/20240902105656.1383858-25-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This attribute is used to setup compression algorithms' parameters, so we
can tweak algorithms' characteristics. At this point only 'level' is
supported (to be extended in the future).
Each call sets up parameters for one particular algorithm, which should be
specified either by the algorithm's priority or algo name. This is
expected to be called after corresponding algorithm is selected via
comp_algorithm or recomp_algorithm.
echo "priority=0 level=1" > /sys/block/zram0/algorithm_params
or
echo "algo=zstd level=1" > /sys/block/zram0/algorithm_params
Link: https://lkml.kernel.org/r/20240902105656.1383858-16-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Moving to custom backends implementation gives us ability to have our own
minimalistic and extendable API, and algorithms tunings becomes possible.
The list of compression backends is empty at this point, we will add
backends in the followup patches.
Link: https://lkml.kernel.org/r/20240902105656.1383858-5-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If disabled, THPs faulted in or collapsed will not be added to
_deferred_list, and therefore won't be considered for splitting under
memory pressure if underused.
Link: https://lkml.kernel.org/r/20240830100438.3623486-7-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <zhais@google.com>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This is an attempt to mitigate the issue of running out of memory when THP
is always enabled. During runtime whenever a THP is being faulted in
(__do_huge_pmd_anonymous_page) or collapsed by khugepaged
(collapse_huge_page), the THP is added to _deferred_list. Whenever memory
reclaim happens in linux, the kernel runs the deferred_split shrinker
which goes through the _deferred_list.
If the folio was partially mapped, the shrinker attempts to split it. If
the folio is not partially mapped, the shrinker checks if the THP was
underused, i.e. how many of the base 4K pages of the entire THP were
zero-filled. If this number goes above a certain threshold (decided by
/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none), the
shrinker will attempt to split that THP. Then at remap time, the pages
that were zero-filled are mapped to the shared zeropage, hence saving
memory.
Link: https://lkml.kernel.org/r/20240830100438.3623486-6-usamaarif642@gmail.com
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Suggested-by: Rik van Riel <riel@surriel.com>
Co-authored-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexander Zhu <alexlzhu@fb.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuang Zhai <zhais@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Shuang Zhai <szhai2@cs.rochester.edu>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We added a public Google calendar for easy sharing of DAMON bi-weekly
meetups[1]. Add it to the official document for a better visibility.
[1] https://lore.kernel.org/all/20240717235812.53087-1-sj@kernel.org/
Link: https://lkml.kernel.org/r/20240826015741.80707-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
maintainer-profile.rst for DAMON separates the links and target
definitions. It is not really necessary, and only makes the readability
worse. At least the definitions need the section title (say,
"References"). Just add the links in place on the doc.
Link: https://lkml.kernel.org/r/20240826015741.80707-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Docs/damon: update GitHub repo URLs and maintainer-profile".
Replace GitHub URLS on DAMON documents for none-kernel parts DAMON repos
with new ones[1] via the first patch. With following two patches,
wordsmith maitnainer-profile for better readability, and document the
Google clendsar for bi-weekly meetups, respectively.
[1] https://lore.kernel.org/20240813232158.83903-1-sj@kernel.org
This patch (of 3):
GitHub repos for non-kernel parts of DAMON project including 'damo',
'damon-tests' and 'damoos' will be moved[1] from 'awslabs' org to
'damonitor', by 2024-09-05. Update related URLs in kernel tree.
[1] https://lore.kernel.org/20240813232158.83903-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240826015741.80707-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240826015741.80707-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <2023002089@link.tyut.edu.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are no more callers of isolate_lru_page(), remove it.
[wangkefeng.wang@huawei.com: convert page to folio in comment and document, per Matthew]
Link: https://lkml.kernel.org/r/20240826144114.1928071-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20240826065814.1336616-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a THP is added to the deferred_list due to partially mapped, its
partial pages are unused, leading to wasted memory and potentially
increasing memory reclamation pressure.
Detailing the specifics of how unmapping occurs is quite difficult and not
that useful, so we adopt a simple approach: each time a THP enters the
deferred_list, we increment the count by 1; whenever it leaves for any
reason, we decrement the count by 1.
Link: https://lkml.kernel.org/r/20240824010441.21308-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuai Yuan <yuanshuai@oppo.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: count the number of anonymous THPs per size", v4.
Knowing the number of transparent anon THPs in the system is crucial
for performance analysis. It helps in understanding the ratio and
distribution of THPs versus small folios throughout the system.
Additionally, partial unmapping by userspace can lead to significant waste
of THPs over time and increase memory reclamation pressure. We need this
information for comprehensive system tuning.
This patch (of 2):
Let's track for each anonymous THP size, how many of them are currently
allocated. We'll track the complete lifespan of an anon THP, starting
when it becomes an anon THP ("large anon folio") (->mapping gets set),
until it gets freed (->mapping gets cleared).
Introduce a new "nr_anon" counter per THP size and adjust the
corresponding counter in the following cases:
* We allocate a new THP and call folio_add_new_anon_rmap() to map
it the first time and turn it into an anon THP.
* We split an anon THP into multiple smaller ones.
* We migrate an anon THP, when we prepare the destination.
* We free an anon THP back to the buddy.
Note that AnonPages in /proc/meminfo currently tracks the total number of
*mapped* anonymous *pages*, and therefore has slightly different
semantics. In the future, we might also want to track "nr_anon_mapped"
for each THP size, which might be helpful when comparing it to the number
of allocated anon THPs (long-term pinning, stuck in swapcache, memory
leaks, ...).
Further note that for now, we only track anon THPs after they got their
->mapping set, for example via folio_add_new_anon_rmap(). If we would
allocate some in the swapcache, they will only show up in the statistics
for now after they have been mapped to user space the first time, where we
call folio_add_new_anon_rmap().
[akpm@linux-foundation.org: documentation fixups, per David]
Link: https://lkml.kernel.org/r/3e8add35-e26b-443b-8a04-1078f4bc78f6@redhat.com
Link: https://lkml.kernel.org/r/20240824010441.21308-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240824010441.21308-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuai Yuan <yuanshuai@oppo.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
among which devices that are reachable through an I2C-mux. The devices
on the mux can be selected by writing the appropriate device number to
an I2C config register.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Just like RK356x and RK3588, RK3576 is compatible to the existing
rk3399 binding.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
'multi-master' property is defined by core i2c-controller schema in
dtschema package, so binding which references it and has
unevaluatedProperties:false, does not need to mention it. It is
completely redundant here.
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Top level defines clocks as variable from 3 to 6 items, so each clause
in if:then: should narrow it further with explicit min and maxItems.
Without minItems, the constrain from top-level is being applied, thus
qcom,msm8996-cci allows between 3 and 4 clocks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Properties are expected to be defined in top-level "properties:" block
and further customized in "if:then:". Only one variant has power
domains, so add respective top-level property and disallow it for other
devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Both xxx and xxx-names properties with variable number of items should
be constrained in each "if:then:". Add missing constraints for clocks,
since we have such for clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
"if:then:" block for Tegra114 and Tegra120 I2C controllers has the same
"then" part (same clocks), so combine them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Document the Renesas RZ/G3S (R9A08G045) RIIC IP. This is compatible with
the version available on Renesas RZ/V2H (R9A09G075).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmbeRpsTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXsDDB/4oL6ypxiF3/yo+xR6bt8HlzIfcVeTx
EuDR+a/hDRQdShMbNtgaF2OxovMO1W5Se2hCoNrKbVxrPRHL6gUuZASdm93l75eh
l8I0muQif1q9rEXNbwQxe/ydE0860OgmE/ZGv944BXBtirG1fGHei1DNKkdL6VJy
iEmmURwz7Ykg5neqwzYBY9SV7P/wwWZNR8GIRTWHhWU+ok1cYpehAs1dpQleAxsz
WZCQLfIMXdSJBSDB/YO7JAlykZ1DkkTkI8pfbe2diReaDSw2QYsnsPXD6MVZArLO
73kDojwb0LitLyWYEjm07ipOApkzYrEGTXjlLNdUVVF1Fx20nohu8jRd
=k5P6
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20240908' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Add a documentation overview of Confidential Computing VM support
(Michael Kelley)
- Use lapic timer in a TDX VM without paravisor (Dexuan Cui)
- Set X86_FEATURE_TSC_KNOWN_FREQ when Hyper-V provides frequency
(Michael Kelley)
- Fix a kexec crash due to VP assist page corruption (Anirudh
Rayabharam)
- Python3 compatibility fix for lsvmbus (Anthony Nandaa)
- Misc fixes (Rachel Menge, Roman Kisel, zhang jiao, Hongbo Li)
* tag 'hyperv-fixes-signed-20240908' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv: vmbus: Constify struct kobj_type and struct attribute_group
tools: hv: rm .*.cmd when make clean
x86/hyperv: fix kexec crash due to VP assist page corruption
Drivers: hv: vmbus: Fix the misplaced function description
tools: hv: lsvmbus: change shebang to use python3
x86/hyperv: Set X86_FEATURE_TSC_KNOWN_FREQ when Hyper-V provides frequency
Documentation: hyperv: Add overview of Confidential Computing VM support
clocksource: hyper-v: Use lapic timer in a TDX VM without paravisor
Drivers: hv: Remove deprecated hv_fcopy declarations
Allow fixed-partitions to be specified through a partitions
node.
Fixes the below dtbs_check warning:
arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtb: nand@0,0: Unevaluated properties are not allowed ('partitions' was unexpected)
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240903-gpmc-dtb-v2-1-8046c1915b96@kernel.org
We need the USB fixes in here as well, and this also resolves the merge
conflict in:
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZt1VBw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynTEACgzhPgd29DA9pmR+BcDPJtxLBRQtcAoNiAFApH
Gzo5Ucw+Snl5wQvBJGhI
=J4Is
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
Detailed description for this pull request:
- Add missing child node port on exttcon-ptn5150 binding document
- Convert extcon-usb-gpio.txt to yaml format for binding document
- Add new LC824206XA microUSB switch driver
: Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
accessory detector chip. It has been tested on a Lenovo Yoga Tablet 2 Pro
1380. And this driver is only used on x86/ACPI (non devicetree) devices,
Therefor there is no devicetree bindings documentation.
- Apply immutable branch between power_supply and extcon tree for extcon-lc824206xa.c
-----BEGIN PGP SIGNATURE-----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=BqOv
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.12
Detailed description for this pull request:
- Add missing child node port on exttcon-ptn5150 binding document
- Convert extcon-usb-gpio.txt to yaml format for binding document
- Add new LC824206XA microUSB switch driver
: Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
accessory detector chip. It has been tested on a Lenovo Yoga Tablet 2 Pro
1380. And this driver is only used on x86/ACPI (non devicetree) devices,
Therefor there is no devicetree bindings documentation.
- Apply immutable branch between power_supply and extcon tree for extcon-lc824206xa.c
* tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: lc824206xa: Fix build error of POWER_SUPPLY_PROP_USB_TYPE
dt-bindings: extcon: convert extcon-usb-gpio.txt to yaml format
dt-bindings: extcon: ptn5150: add child node port
extcon: Add LC824206XA microUSB switch driver
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
- Provide info about trusted.overlay.metacopy extended attribute
- Minor rephrasing regarding copy-up operation with metacopy=on
Signed-off-by: Yuriy Belikov <yuriybelikov1@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Late pull request as I was planing to include another series that
is waiting for a fix to end up in char-misc-next. That can wait
for next cycle.
Includes one immutable branch merge from MFD to get a necessary header
change.
Usual mix of a few new drivers, additional device support for existing
drivers, new features and a bunch of cleanup across tree.
New device support
==================
asahi-kasei,ak8975
- A few minor fixes as precursors to support for the AK09118 magnetometer
that is very similar to the already supported AK09112
awinic,aw96103
- New driver for this capacitive proximity sensor.
x-powers,axp202
- Add support for the axp717 (including merge of MFD immutable branch).
sophgo,saradc
- New driver for this SOC ADC.
Features
========
adi,ad4695
- Add calibration support.
bosch,bmi323
- Ensure device is in lowest power state on suspend.
Cleanup and minor fixes
=======================
treewide
- Start to standardize formatting of id tables (ADC drivers done so far).
adi,ad5449
- Drop platform data support as long unused in upstream kernel.
bosch,bmc150
- Use fwnode_irq_get_by_name() in place of of_ variant.
- Use ACPI_HANDLE() to get the handle directly rather than via
ACPI_COMPANION()
google,cros_ec_mkbp_proximity
- Include mod_devicetable.h instead of broader of.h
mirochip,mcp320x
- Drop vendorless compatible entries as not needed for backwards
compatibility and should not be used in new boards.
st,lsm6dsx
- Use iio_read_acpi_mount_matrix() helper instead of open coding the
same.
- Drop some unnecessary dev_fwnode() calls to check if a fwnode is
available. All the calls made handle this anyway.
xilinx,ams
- Use device_for_each_child_node_scoped() to avoid manual release of
fwnode handle.
tools,generic-buffer
- Handle failure to allocate trigger name.
- Cleanup .*.cmd files if present.
-----BEGIN PGP SIGNATURE-----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=pFg9
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support features and cleanup for 6.12
Late pull request as I was planing to include another series that
is waiting for a fix to end up in char-misc-next. That can wait
for next cycle.
Includes one immutable branch merge from MFD to get a necessary header
change.
Usual mix of a few new drivers, additional device support for existing
drivers, new features and a bunch of cleanup across tree.
New device support
==================
asahi-kasei,ak8975
- A few minor fixes as precursors to support for the AK09118 magnetometer
that is very similar to the already supported AK09112
awinic,aw96103
- New driver for this capacitive proximity sensor.
x-powers,axp202
- Add support for the axp717 (including merge of MFD immutable branch).
sophgo,saradc
- New driver for this SOC ADC.
Features
========
adi,ad4695
- Add calibration support.
bosch,bmi323
- Ensure device is in lowest power state on suspend.
Cleanup and minor fixes
=======================
treewide
- Start to standardize formatting of id tables (ADC drivers done so far).
adi,ad5449
- Drop platform data support as long unused in upstream kernel.
bosch,bmc150
- Use fwnode_irq_get_by_name() in place of of_ variant.
- Use ACPI_HANDLE() to get the handle directly rather than via
ACPI_COMPANION()
google,cros_ec_mkbp_proximity
- Include mod_devicetable.h instead of broader of.h
mirochip,mcp320x
- Drop vendorless compatible entries as not needed for backwards
compatibility and should not be used in new boards.
st,lsm6dsx
- Use iio_read_acpi_mount_matrix() helper instead of open coding the
same.
- Drop some unnecessary dev_fwnode() calls to check if a fwnode is
available. All the calls made handle this anyway.
xilinx,ams
- Use device_for_each_child_node_scoped() to avoid manual release of
fwnode handle.
tools,generic-buffer
- Handle failure to allocate trigger name.
- Cleanup .*.cmd files if present.
* tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
tools/iio: Add memory allocation failure check for trigger_name
iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
iio: adc: mcp320x: Drop vendorless compatible strings
iio: dac: ad5449: drop support for platform data
iio: adc: xilinx-ams: use device_* to iterate over device child nodes
iio: ABI: document ad4695 new attributes
doc: iio: ad4695: update for calibration support
iio: adc: ad4695: implement calibration support
iio: adc: ad4695: add 2nd regmap for 16-bit registers
iio: bmi323: peripheral in lowest power state on suspend
...
In packet-per-buffer mode for isochronous context of 1394 OHCI, software
can schedule hardIRQ to the buffer in which the content of isochronous
packet is processed. The actual behaviour is different between isochronous
receive (IR) and transmit (IT) contexts in respect to isochronous cycle in
which the hardIRQ occurs.
In IR context, the hardIRQ occurs when the buffer is filled actually by
the content of received packet. If there are any isochronous cycles in
which the packet transmission is skipped, it is postponed to generate
the hardIRQ in respect to the isochronous cycle. In IT context, software
can schedule the content of packet every isochronous cycle including
skipping, therefore the hardIRQ occurs in the isochronous cycle to which
the software scheduled.
ALSA firewire stack uses the packet-per-buffer mode for both IR/IT
contexts. To process time stamp per packet (or per sample in some cases)
steadily for media clock recovery against unexpected transmission skips,
it uses an IT context to operate all of isochronous contexts by calls of
fw_iso_context_flush_completions() in the bottom-half of hardIRQ for the
IT context.
Although it looks well to handle all of isochronous contexts in a single
bottom-half context, it relatively takes longer time. In the future code
integration (not yet), it is possible to apply parallelism method to
process these context. In the case, it is useful to allow unit drivers to
schedule work items to process these isochronous contexts.
As a preparation, this commit exposes
fw_iso_context_schedule_flush_completions() as a kernel API available by
unit drivers. It is renamed from fw_iso_context_queue_work() since it is
a counter part of fw_iso_context_flush_completions().
Link: https://lore.kernel.org/r/20240908040549.75304-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Add compatible binding for the axp717.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20240821215456.962564-9-macroalpha82@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are a few lines in the kbuild-language.rst document which
obliquely reference the behavior of config options without prompts.
But there is nothing in the obvious location that explicitly calls
out that users cannot edit config options unless they have a prompt.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge series from Andre Przywara <andre.przywara@arm.com>:
This is remainder of the AXP717 fix series, containing support for the
boost regulator. This is meant to increase the battery voltage to the 5
volts required to provide the USB VBUS power.
It's the usual trinity of DT bindings patch (1/3), the MFD part
describing the PMIC registers (2/3) and the final patch to model the
regulator (3/3).
Compared to v2, this drops the merged patches, and just retains the
boost related parts. It also changes the internal name of the register
to AXP717_MODULE_EN_CONTROL_2, since there is another control register
we will need later for battery support.
The X-Powers AXP717 contains a boost regulator, that it meant to provide
the 5V USB VBUS voltage when the devices operates on battery.
Add the name "boost" to the regexp describing the allowed node names,
to allow the regulator to be described in the devicetree.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-2-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
* A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
* A fix to avoid a kernel memory leak when emulating misaligned accesses
from userspace.
* A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
* A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
* A fix for early alternatives on relocatable kernels.
-----BEGIN PGP SIGNATURE-----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=xYax
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A revert for the mmap() change that ties the allocation range to the
hint adress, as what we tried to do ended up regressing on other
userspace workloads.
- A fix to avoid a kernel memory leak when emulating misaligned
accesses from userspace.
- A Kconfig fix for toolchain vector detection, which now correctly
detects vector support on toolchains where the V extension depends on
the M extension.
- A fix to avoid failing the linear mapping bootmem bounds check on
NOMMU systems.
- A fix for early alternatives on relocatable kernels.
* tag 'riscv-for-linus-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix RISCV_ALTERNATIVE_EARLY
riscv: Do not restrict memory size because of linear mapping on nommu
riscv: Fix toolchain vector detection
riscv: misaligned: Restrict user access to kernel memory
riscv: mm: Do not restrict mmap address based on hint
riscv: selftests: Remove mmap hint address checks
Revert "RISC-V: mm: Document mmap changes"
amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
xe:
- GSC loading fix
- PCODE mutex fix
- Suspend/Resume fixes
- RPM fixes
i915:
- Do not attempt to load the GSC multiple times
- Fix readout degamma_lut mismatch on ilk/snb
- Mark debug_fence_init_onstack() with __maybe_unused
- fence: Mark debug_fence_free() with __maybe_unused
- display: Add mechanism to use sink model when applying quirk
- display: Increase Fast Wake Sync length as a quirk
komeda:
- zpos normalization fix
nouveau:
- incorrect register fix
imagination:
- memory leak fix
bridge:
- hdmi/bridge rework fixes
panthor:
- cache coherency fix
- hi priority access fix
panel:
- change of compatible string
fbdev:
- deferred-io init with no struct page fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmbahKAACgkQDHTzWXnE
hr7zzA/+JJqrrRlM6sq4nDwlt2I9s0czrx4vUuUmDSCCAGdAgPEV4aFqkPzXTpeN
Pd2G8p+pcPJHXBS77cBh+sRUZqxIpWK7uQH4dF45uEvDznU9zI9pMdWsNR2hYu8L
PES/SdAggvErP5Ped5Mga20aLGbEr7oNwqooLYYZqPYsoFdxM6BjfXN6rgzWZoVA
a1nH6iRhfRAlBa5JviRn7eP9CRdQomeZ/OvPkLVWnLXNTIdbJ/DcPRbZaKFF5r0k
qMYSGyNA7oj1ank6sKKuPzJbbxQwiEBgT2hkOhexz99+vKkBysBI2pwjgfk3YXKa
GqtB51ssi/WkeCVFu/GgaU+EJg0crPIktvwDQgojtYDrnXKUOVTbOnGM6KFN6RWi
eYyICPshC3+BI0X9MiaX/b6IIhFlgO/KwJcFlVwk1A4/dHf0kUH+kzm+mSCF2Yzs
TTb+cBMMRvhvh1P5o4J0UempK4QCRPN7a8vJ2sgOgyC8oLrnEZQ+p3Rb01gWZyqx
TtkBuIgfPdpbAfPo07oswgNcwwUYTPtvzkBjpLojhKSYYJFga0IBhUE9u0PVFtFL
sh8ihq2r77mLEsA9/pNuqwQ6QiWVYm8oHHtsTUlhtZDGPIfjio1DLOO4ZEVOQf4e
1tUENuzXxp1xuXPbunA1cafVCUrcqYWGPIwM8pBZDqfqu+YssCc=
=EJEZ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-09-06' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This has a fair few patches in it, but I reviewed them all and they
seem like real things, amdgpu, i915 and xe each have a bunch of fixes
for various things, then there is a some bridge suspend/resume
ordering fixes for a recent rework, and then some single driver
changes in a few others.
Nothing looks too serious, hopefully next week is quiet.
amdgpu:
- IPS workaround
- Fix compatibility with older MES firmware
- Fix CPU spikes when clearing VRAM
- Backlight fix
- PMO fix
- Revert SWSMU change to fix regression
xe:
- GSC loading fix
- PCODE mutex fix
- Suspend/Resume fixes
- RPM fixes
i915:
- Do not attempt to load the GSC multiple times
- Fix readout degamma_lut mismatch on ilk/snb
- Mark debug_fence_init_onstack() with __maybe_unused
- fence: Mark debug_fence_free() with __maybe_unused
- display: Add mechanism to use sink model when applying quirk
- display: Increase Fast Wake Sync length as a quirk
komeda:
- zpos normalization fix
nouveau:
- incorrect register fix
imagination:
- memory leak fix
bridge:
- hdmi/bridge rework fixes
panthor:
- cache coherency fix
- hi priority access fix
panel:
- change of compatible string
fbdev:
- deferred-io init with no struct page fix"
* tag 'drm-fixes-2024-09-06' of https://gitlab.freedesktop.org/drm/kernel: (29 commits)
Revert "drm/amdgpu: align pp_power_profile_mode with kernel docs"
drm/fbdev-dma: Only install deferred I/O if necessary
drm/panthor: flush FW AS caches in slow reset path
drm: panel: nv3052c: Correct WL-355608-A8 panel compatible
dt-bindings: display: panel: Rename WL-355608-A8 panel to rg35xx-*-panel
drm/panthor: Restrict high priorities on group_create
drm/xe/display: Avoid encoder_suspend at runtime suspend
drm/xe: Suspend/resume user access only during system s/r
drm/xe/display: Match i915 driver suspend/resume sequences better
drm/xe: Add missing runtime reference to wedged upon gt_reset
drm/xe/pcode: Treat pcode as per-tile rather than per-GT
drm/xe/gsc: Do not attempt to load the GSC multiple times
drm/bridge-connector: reset the HDMI connector state
drm/bridge-connector: move to DRM_DISPLAY_HELPER module
drm/display: stop depending on DRM_DISPLAY_HELPER
drm/i915/display: Increase Fast Wake Sync length as a quirk
drm/i915/display: Add mechanism to use sink model when applying quirk
drm/amd/display: Block timing sync for different signals in PMO
drm/amd/display: Lock DC and exit IPS when changing backlight
drm/amdgpu: always allocate cleared VRAM for GEM allocations
...
This pull request contains the interconnect changes for the 6.12-rc1 merge
window. It contains new drivers and fixes with the following highlights:
Driver changes:
- New driver for MSM8976 platforms
- New driver for MSM8937 platforms
- Enable sync_state for SM8250 platforms
- Enable QoS support for QCS404
- Add ab_coeff bandwidth adjustments for MSM8953
- Drop the unsupported yet DISP nodes on SM8350 platforms
- Fix missed num_nodes initialization in icc-clk driver
- Misc DT and documentation fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ckcc
-----END PGP SIGNATURE-----
Merge tag 'icc-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.12
This pull request contains the interconnect changes for the 6.12-rc1 merge
window. It contains new drivers and fixes with the following highlights:
Driver changes:
- New driver for MSM8976 platforms
- New driver for MSM8937 platforms
- Enable sync_state for SM8250 platforms
- Enable QoS support for QCS404
- Add ab_coeff bandwidth adjustments for MSM8953
- Drop the unsupported yet DISP nodes on SM8350 platforms
- Fix missed num_nodes initialization in icc-clk driver
- Misc DT and documentation fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom: Do not require reg for sc8180x virt NoCs
dt-bindings: interconnect: qcom-bwmon: Document SA8775p bwmon compatibles
dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
interconnect: qcom: msm8953: Add ab_coeff
dt-bindings: interconnect: qcom: msm8939: Fix example
interconnect: qcom: qcs404: Add regmaps and more bus descriptions
interconnect: qcom: qcs404: Mark AP-owned nodes as such
interconnect: qcom: Add MSM8937 interconnect provider driver
interconnect: qcom: sm8250: Enable sync_state
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
interconnect: qcom: Add MSM8976 interconnect provider driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
interconnect: icc-clk: Add missed num_nodes initialization
dt-bindings: interconnect: qcom,rpmh: correct sm8150 camnoc
The PCIe SSD Status LED Management _DSM defined in PCI Firmware Spec r3.3
sec 4.7 provides a way to manage LEDs via ACPI.
The design is similar to NPEM defined in PCIe Base Specification r6.1 sec
6.28:
- Both standards are indication oriented,
- _DSM supported bits correspond to NPEM capability register bits,
- _DSM control bits correspond to NPEM control register bits.
_DSM does not support enclosure-specific indications or the special NPEM
commands NPEM_ENABLE and NPEM_RESET.
_DSM is implemented as a second backend in NPEM driver. The backend used is
logged with info priority. The same sysfs interface is used for both NPEM
and _DSM.
According to spec, _DSM has higher priority, and availability of _DSM in
not limited to devices with NPEM support.
The Dell implementation of DSM uses acpi ipmi, which may not be available
immediately (in fact it may take up to 10s for this interface to be
available). It can determine if DSM is supported (GET_SUPPORTED_STATES_DSM
is working) but it cannot serve GET_STATE_DSM or SET_STATE_DSM commands in
this time.
From userspace application perspective (primarily configured by systemd
service) it is better to have not working but configured interface rather
than have it available after few seconds.
For that reason, npem->active_indications cache is now loaded lazily, i.e.
any GET or SET request want cache to be updated if it is not done yet.
Link: https://lore.kernel.org/r/20240904104848.23480-4-mariusz.tkaczyk@linux.intel.com
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add compatible for smmu representing support on SA8255p.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
Link: https://lore.kernel.org/r/20240905193656.3785537-1-quic_nkela@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
The Arm NI-700 Network-on-Chip Interconnect has a relatively
straightforward design with a hierarchy of voltage, power, and clock
domains, where each clock domain then contains a number of interface
units and a PMU which can monitor events thereon. As such, it begets a
relatively straightforward driver to interface those PMUs with perf.
Even more so than with arm-cmn, users will require detailed knowledge of
the wider system topology in order to meaningfully analyse anything,
since the interconnect itself cannot know what lies beyond the boundary
of each inscrutably-numbered interface. Given that, for now they are
also expected to refer to the NI-700 documentation for the relevant
event IDs to provide as well. An identifier is implemented so we can
come back and add jevents if anyone really wants to.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9933058d0ab8138c78a61cd6852ea5d5ff48e393.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add an initial binding for the Arm NI-700 interconnect PMU. As with the
Arm CMN family, there are already future NI products on the roadmap, so
the overall binding is named generically just in case any
non-discoverable incompatibility between generations crops up.
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5f86237580219116de37e5e54d8b7eb0c9ed580d.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
1. Support alpha blending
2. Remove cl in struct cmdq_pkt
3. Fixup for ovl adaptor
4. Declare Z Position for all planes
5. Drop unnecessary check for property presence
6. Add dsi per-frame lp code for mt8188
7. Fix missing configuration flags in mtk_crtc_ddp_config()
8. Use spin_lock_irqsave() for CRTC event lock
9. Add power domain binding to the mediatek DPI controller
-----BEGIN PGP SIGNATURE-----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=dgfr
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.12
1. Support alpha blending
2. Remove cl in struct cmdq_pkt
3. Fixup for ovl adaptor
4. Declare Z Position for all planes
5. Drop unnecessary check for property presence
6. Add dsi per-frame lp code for mt8188
7. Fix missing configuration flags in mtk_crtc_ddp_config()
8. Use spin_lock_irqsave() for CRTC event lock
9. Add power domain binding to the mediatek DPI controller
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240901131354.2686-1-chunkuang.hu@kernel.org
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240811214656.3773098-1-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fill another small gap in the nftables spec so that it is possible to
dump a tailscale ruleset with:
tools/net/ynl/cli.py --spec \
Documentation/netlink/specs/nftables.yaml --dump getrule
This adds support for the 'target' expression.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240904091024.3138-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 6f8b12d661 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.
This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.
The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.
Before this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647
After this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range
Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:
include/linux/netdevice.h: unsigned int tx_queue_len;
And has an overflow check:
dev_change_tx_queue_len(..., unsigned long new_len):
if (new_len != (unsigned int)new_len)
return -ERANGE;
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZtm9wgAKCRAnX84Zoj2+
djrnAX913s+RTPRiNY6ym8XQo7jABX8/XxfHK9kbhyWF1aoOmd2kBxp/wP15hAmu
ZSvMyPkBewek4CdFAS0GlkrdTkFXgvRIG415PtHTVwQU2bkdzc/3OzIhBNfkILX1
HGzozDl5ew==
=ui/V
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-09-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open
- eth: r8152: fix the firmware communication error due to use
of bulk write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ju86
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was split
into new features by using an alternative approach for the code that
used what is now called the 'box_uninit_write' feature.
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers.
- Export bss symbols too.
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API.
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'.
Documentation:
- Remove unintended indentation (blockquotes) in generated output.
- Fix a couple typos.
MAINTAINERS:
- Remove Wedson as Rust maintainer.
- Update Andreas' email.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmbaIkMACgkQGXyLc2ht
IW2PtQ//ZMLngRVmzOtek7oz3NfR7vAbMjwknC8uy9xKsBGGYpyI9LUdBziMB/SD
+/moWfLacJwuFRRlgsPVjo6IcwCnMauO5V77cWWTbcH6dgigfD4fz/IpZlMuTdUA
gQ8xAjr8jMK0uT3ME5v7QpXQYOE/1wvOHJpULO71On1l4JqxCbSRozxI4TTxFEmP
mVRCV7c38NzX2YZyYkIzbkXNS8y0tbCTMC1HLCfROOrxbGh7eqjq/AZcHl2SkxHg
C0u0Rc7BQtMkCQqtceEWPNloe2SlznbhqiJi6vOttM3LUFYCtS76zqrGnnqtFkMF
zJuXYNpbjFDvZCfbOL50p0oYb5G/+FgZarK+TPXympPnyqoyWNufwS5N0Hn10wn8
5GbI3ZGrg6q5SE39Sf/wiC9tMP4h2dUTeLwabk2yuW7QVBAxw52SkEtpRIevSN2n
b0IUExRHilXMBY0FmkP3x+Ot+qkydxWH0c/rpf9NldNfP7F6QY384hn47/cl8bMo
LUygXBjAbDTtKage97JkZTfmOUeS6nrYrQjLL/kUu1H+AdnhOUndtaHv6W5zArQQ
hFU751+izJFiEw8wqw1MoK2CcRL5QNMDdrj+kwXaCMNSv0Ie3p4jqXuWXSVUBoMz
l0pJMgjE1Dc2QYTDV3Jq8ptiiBBM9Oyxen/doBA0OJiMm9S1drQ=
=nJge
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was
split into new features by using an alternative approach for the
code that used what is now called the 'box_uninit_write' feature
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers
- Export bss symbols too
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'
Documentation:
- Remove unintended indentation (blockquotes) in generated output
- Fix a couple typos
MAINTAINERS:
- Remove Wedson as Rust maintainer
- Update Andreas' email"
* tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: update Andreas Hindborg's email address
MAINTAINERS: Remove Wedson as Rust maintainer
rust: macros: provide correct provenance when constructing THIS_MODULE
rust: allow `stable_features` lint
docs: rust: remove unintended blockquote in Quick Start
rust: alloc: eschew `Box<MaybeUninit<T>>::write`
rust: kernel: fix typos in code comments
docs: rust: remove unintended blockquote in Coding Guidelines
rust: block: fix wrong usage of lockdep API
rust: kbuild: fix export of bss symbols
Expand the conditional compilation section to explain how to support
other expressions, such as testing whether `RUSTC_VERSION` is at least
a given version, which requires a numerical comparison that Rust's `cfg`
predicates do not support (yet?).
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240902165535.1101978-7-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Update to commit 5928d41155 ("Documentation: Document the Linux Kernel
CVE process")
commit 0217f3944a ("Documentation: security-bugs.rst: linux-distros
relaxed their rules")
commit 3c1897ae4b ("Documentation: security-bugs.rst: clarify CVE
handling")
commit 4fee0915e6 ("Documentation: security-bugs.rst: update
preferences when dealing with the linux-distros group")
commit 44ac5abac8 ("Documentation/security-bugs: move from admin-guide/
to process/")
Signed-off-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240611020514.48770-1-dzm91@hust.edu.cn
This patch corrects several grammar and spelling errors in the
Documentation/block/bfq-iosched.rst file. These changes improve
the clarity and readability of the documentation.
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240814155558.3672833-1-karprzy7@gmail.com
Correct spelling mistakes in the documentation to improve readability.
Signed-off-by: Amit Vadhavana <av2082000@gmail.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240817072724.6861-1-av2082000@gmail.com
Commit ed5cc702d3 ("block: Add config option to not allow writing to mounted
devices") added a Kconfig option along with a kernel command-line tuning to
control writes to mounted block devices, as a means to deal with fuzzers like
Syzkaller, that provokes kernel crashes by directly writing on block devices
bypassing the filesystem (so the FS has no awareness and cannot cope with that).
The patch just missed adding such kernel command-line option to the kernel
documentation, so let's fix that.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240828145045.309835-1-gpiccoli@igalia.com
The member "wait" in struct completion isn't of type wait_queue_head_t
anymore, as it is now "struct swait_queue_head", fix it to match with
the current implementation.
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240828165036.178011-1-richard120310@gmail.com
In zh_CN part of translations.pdf, there are several ASCII-art
diagrams whose vertical lines look sometimes jagged.
This is due to the interference between default settings of xeCJK
and fancyvrb (employed in sphinxVerbatim env), where extra space
is inserted between a latin char and a non-latin char when they
are next to each other (i.e., no explicit white space).
This issue can be suppressed by invoking \CJKsetecglue{} at the
beginning of every sphinxVerbatim enviornment.
\AtBeginEnvironment, provided by the etoolbox package, is useful in
this case.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240905050941.31439-1-akiyks@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmbUG7oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7LUH/26M4QJ5UGJHsehd
bbHlE4or0jibFyMbUiYDOElqLITjCVH6mi3Kv3E7sfyLxSsglVRRNzLCTq/UgTf8
E1L90q4wCySElzzIhH6cltuQdAhs7pRWs5BETByvIW+g+ayN0LZxUPbvB8yl/nOU
Zx8flBEuM2isuRlnx+iRccbf2PxNadSkSYg2TlmZr8mfFKCiRxjU7x355Q3UcylQ
b8S2jVgq69CSDF3IBOzwHZjdq5OceDsO8he0KcfSTvSgyFMcwhntAT397YEnFXnk
KKjKPNCu3KqHtTxsi4Sc0wOxVcgctDv4OPethaL8yROQ7jdBTkvNpPT1yMf7bca8
ZLpSo5Y=
=TBcj
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc6' into docs-mw
This is done primarily to get a docs build fix merged via another tree so
that "make htmldocs" stops failing.
Add support for the Extron DA HD 4K Plus series of 4K HDMI
Distrubution Amplifiers (aka HDMI Splitters).
These devices support CEC and this driver adds support for the
CEC protocol for both the input and all outputs (2, 4 or 6 outputs,
depending on the model).
It also exports the EDID from the outputs and allows reading and
setting the EDID of the input.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
b4 is now widely used and is quite helpful for a lot of the things that
submitting-patches covers, let's advertise it to submitters to try to make
their lives easier and reduce the number of procedural issues maintainers
see.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240905-documentation-b4-advert-v2-1-24d686ba4117@kernel.org
Another batch of compatibles unlikely to ever be documented. It's
mostly old PowerMAC and PPC stuff found in DT compatible API calls.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240904200253.3112699-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.
Fixes: ef89fd56bd ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-2-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hp-wmi-sensors: Check if WMI event data exists before accessing it
ltc2991: fix register bits defines
-----BEGIN PGP SIGNATURE-----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=sSGh
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.11-rc7' into review-hans
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75 ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
-----BEGIN PGP SIGNATURE-----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=hZ0b
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6GV4
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/20240904193042.15118-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use get_device()/put_device() to keep reset controller devices alive
while their reset controls are acquired.
Enable support for the Amlogic T7 SoC reset controller.
Remove unused EyeQ reset bindings and add a reset controller driver
to be instantiated as auxiliary device by the EyeQ clock driver.
Fix OF node leaks in the k210 and berlin probe() error paths.
Add some simplifications and cleanup in the core, lcp18xx driver, and
uniphier bindings.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCZtg4SBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwI3XAP4voAnbJS7rvnqv9zr/V0sXM2ml
UORkWFiRVDVCavLxUwEAy/zDc3ZtcPSx64PE0o6t1Ol8+i2nqivqWUR3dj9WUg4=
=qXYX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=NcTE
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v6.12' of git://git.pengutronix.de/pza/linux into soc/drivers
Reset controller updates for v6.12
Use get_device()/put_device() to keep reset controller devices alive
while their reset controls are acquired.
Enable support for the Amlogic T7 SoC reset controller.
Remove unused EyeQ reset bindings and add a reset controller driver
to be instantiated as auxiliary device by the EyeQ clock driver.
Fix OF node leaks in the k210 and berlin probe() error paths.
Add some simplifications and cleanup in the core, lcp18xx driver, and
uniphier bindings.
* tag 'reset-for-v6.12' of git://git.pengutronix.de/pza/linux:
reset: eyeq: add platform driver
Revert "dt-bindings: reset: mobileye,eyeq5-reset: add bindings"
reset: reset-meson: Add support for Amlogic T7 SoC reset controller
dt-bindings: reset: Add Amlogic T7 reset controller
reset: core: add get_device()/put_device on rcdev
reset: lpc18xx: simplify with devm_clk_get_enabled()
reset: lpc18xx: simplify with dev_err_probe()
reset: simplify locking with guard()
reset: k210: fix OF node leak in probe() error path
reset: berlin: fix OF node leak in probe() error path
dt-bindings: reset: socionext,uniphier-glue-reset: add top-level constraints
Link: https://lore.kernel.org/r/20240904103921.1479579-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmbYV0kTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28by1LB/sHoXO3xuCLnt8fWe0EgbukmuXY93n+
vy2A4FzxS3Zg2M2Floc1k5gY5QNPE6IfpZoZnwn21L6KdO4b4Nkancr3jo8YL09O
o4v2mcGNWmPIx8t63ni3TLe/SfuxFRlEidfVdGLWhNDygtC6QgUdnozqi6ssD0UY
jHAKFgclgnx9kU6+v4/isvYEQOTauTjwdAUqITeN17ZLC5KJ44Os4WOIF0XSXrGi
/LTHtbfBZtVxv6F8kIc8vh9/WrdnqluL9RaZq+bt/tZNkqwK+BPkT0lWsJ2vCinn
arEORIDCYCv75trakUwnSuPZVOAN6FS2Xe2Qmd3IVAwEvX8aK8vf9lKO
=PtSf
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-04-2
this is a pull request of 18 patches for net-next/master.
All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.
The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.
The remaining 17 patches are by me and add the driver in several
stages.
linux-can-next-for-6.12-20240904-2
* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
can: rockchip_canfd: add hardware timestamping support
can: rockchip_canfd: enable full TX-FIFO depth of 2
can: rockchip_canfd: prepare to use full TX-FIFO depth
can: rockchip_canfd: add stats support for errata workarounds
can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
can: rockchip_canfd: implement workaround for erratum 12
can: rockchip_canfd: implement workaround for erratum 6
can: rockchip_canfd: add TX PATH
can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
can: rockchip_canfd: add notes about known issues
can: rockchip_canfd: add support for rk3568v3
can: rockchip_canfd: add quirk for broken CAN-FD support
can: rockchip_canfd: add quirks for errata workarounds
can: rockchip_canfd: add driver for Rockchip CAN-FD controller
dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================
Link: https://patch.msgid.link/20240904130256.1965582-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
i.MX28 has an RX DMA channel associated with the LCDIF controller.
Document the 'dmas' and 'dma-names' properties to fix the following
dt-schema warnings:
lcdif@80030000: 'dma-names', 'dmas' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240904104027.2065621-1-festevam@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref to watchdog.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240814161250.4017427-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The PM6150 vibrator module is compatible with the PMI632 vibrator
module, document the PM6150 vibrator compatible as fallback for the
PMI632 vibrator.
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240606181027.98537-2-adrian@travitia.xyz
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
-----BEGIN PGP SIGNATURE-----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=dcCx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zjLL
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
