commit d0fa70aca54c8643248e89061da23752506ec0d4 upstream.
Add a check before visiting the members of ea to
make sure each ea stays within the ealist.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 255547c6bb8940a97eea94ef9d464ea5967763fb upstream.
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region.
Link: https://lkml.kernel.org/r/20240626104433.163270-1-llfamsec@gmail.com
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df39038cd89525d465c2c8827eb64116873f141a upstream.
There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on
s390. Therefore we do not expect to see VM_FAULT_HWPOISON in
do_exception().
However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more
general"), it is possible to see VM_FAULT_HWPOISON in combination with
PTE_MARKER_POISONED, even on architectures that do not support HWPOISON
otherwise. In this case, we will end up on the BUG() in do_exception().
Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar
to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault
flags, for easier debugging.
Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot
support swap entries on other levels than PTE level.
Cc: stable@vger.kernel.org # 6.6+
Fixes: af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general")
Reported-by: Yunseong Kim <yskelg@gmail.com>
Tested-by: Yunseong Kim <yskelg@gmail.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Message-ID: <20240715180416.3632453-1-gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6769a23697f17f9bf9365ca8ed62fe37e361a05a upstream.
The "instance" variable needs to be signed for the error handling to work.
Fixes: 8b2faf1a4f3b ("drm/amdgpu: add error handle to avoid out-of-bounds")
Reviewed-by: Bob Zhou <bob.zhou@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Siddh Raman Pant <siddh.raman.pant@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d8f805789072ea7fd39504694b7bd17e5f751c4 ]
We got the following issue in our fault injection stress test:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_withdraw_cookie+0x4d9/0x600
Read of size 8 at addr ffff888118efc000 by task kworker/u78:0/109
CPU: 13 PID: 109 Comm: kworker/u78:0 Not tainted 6.8.0-dirty #566
Call Trace:
<TASK>
kasan_report+0x93/0xc0
cachefiles_withdraw_cookie+0x4d9/0x600
fscache_cookie_state_machine+0x5c8/0x1230
fscache_cookie_worker+0x91/0x1c0
process_one_work+0x7fa/0x1800
[...]
Allocated by task 117:
kmalloc_trace+0x1b3/0x3c0
cachefiles_acquire_volume+0xf3/0x9c0
fscache_create_volume_work+0x97/0x150
process_one_work+0x7fa/0x1800
[...]
Freed by task 120301:
kfree+0xf1/0x2c0
cachefiles_withdraw_cache+0x3fa/0x920
cachefiles_put_unbind_pincount+0x1f6/0x250
cachefiles_daemon_release+0x13b/0x290
__fput+0x204/0xa00
task_work_run+0x139/0x230
do_exit+0x87a/0x29b0
[...]
==================================================================
Following is the process that triggers the issue:
p1 | p2
------------------------------------------------------------
fscache_begin_lookup
fscache_begin_volume_access
fscache_cache_is_live(fscache_cache)
cachefiles_daemon_release
cachefiles_put_unbind_pincount
cachefiles_daemon_unbind
cachefiles_withdraw_cache
fscache_withdraw_cache
fscache_set_cache_state(cache, FSCACHE_CACHE_IS_WITHDRAWN);
cachefiles_withdraw_objects(cache)
fscache_wait_for_objects(fscache)
atomic_read(&fscache_cache->object_count) == 0
fscache_perform_lookup
cachefiles_lookup_cookie
cachefiles_alloc_object
refcount_set(&object->ref, 1);
object->volume = volume
fscache_count_object(vcookie->cache);
atomic_inc(&fscache_cache->object_count)
cachefiles_withdraw_volumes
cachefiles_withdraw_volume
fscache_withdraw_volume
__cachefiles_free_volume
kfree(cachefiles_volume)
fscache_cookie_state_machine
cachefiles_withdraw_cookie
cache = object->volume->cache;
// cachefiles_volume UAF !!!
After setting FSCACHE_CACHE_IS_WITHDRAWN, wait for all the cookie lookups
to complete first, and then wait for fscache_cache->object_count == 0 to
avoid the cookie exiting after the volume has been freed and triggering
the above issue. Therefore call fscache_withdraw_volume() before calling
cachefiles_withdraw_objects().
This way, after setting FSCACHE_CACHE_IS_WITHDRAWN, only the following two
cases will occur:
1) fscache_begin_lookup fails in fscache_begin_volume_access().
2) fscache_withdraw_volume() will ensure that fscache_count_object() has
been executed before calling fscache_wait_for_objects().
Fixes: fe2140e2f57f ("cachefiles: Implement volume support")
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240628062930.2467993-4-libaokun@huaweicloud.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 522018a0de6b6fcce60c04f86dfc5f0e4b6a1b36 ]
We got the following issue in our fault injection stress test:
==================================================================
BUG: KASAN: slab-use-after-free in fscache_withdraw_volume+0x2e1/0x370
Read of size 4 at addr ffff88810680be08 by task ondemand-04-dae/5798
CPU: 0 PID: 5798 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #565
Call Trace:
kasan_check_range+0xf6/0x1b0
fscache_withdraw_volume+0x2e1/0x370
cachefiles_withdraw_volume+0x31/0x50
cachefiles_withdraw_cache+0x3ad/0x900
cachefiles_put_unbind_pincount+0x1f6/0x250
cachefiles_daemon_release+0x13b/0x290
__fput+0x204/0xa00
task_work_run+0x139/0x230
Allocated by task 5820:
__kmalloc+0x1df/0x4b0
fscache_alloc_volume+0x70/0x600
__fscache_acquire_volume+0x1c/0x610
erofs_fscache_register_volume+0x96/0x1a0
erofs_fscache_register_fs+0x49a/0x690
erofs_fc_fill_super+0x6c0/0xcc0
vfs_get_super+0xa9/0x140
vfs_get_tree+0x8e/0x300
do_new_mount+0x28c/0x580
[...]
Freed by task 5820:
kfree+0xf1/0x2c0
fscache_put_volume.part.0+0x5cb/0x9e0
erofs_fscache_unregister_fs+0x157/0x1b0
erofs_kill_sb+0xd9/0x1c0
deactivate_locked_super+0xa3/0x100
vfs_get_super+0x105/0x140
vfs_get_tree+0x8e/0x300
do_new_mount+0x28c/0x580
[...]
==================================================================
Following is the process that triggers the issue:
mount failed | daemon exit
------------------------------------------------------------
deactivate_locked_super cachefiles_daemon_release
erofs_kill_sb
erofs_fscache_unregister_fs
fscache_relinquish_volume
__fscache_relinquish_volume
fscache_put_volume(fscache_volume, fscache_volume_put_relinquish)
zero = __refcount_dec_and_test(&fscache_volume->ref, &ref);
cachefiles_put_unbind_pincount
cachefiles_daemon_unbind
cachefiles_withdraw_cache
cachefiles_withdraw_volumes
list_del_init(&volume->cache_link)
fscache_free_volume(fscache_volume)
cache->ops->free_volume
cachefiles_free_volume
list_del_init(&cachefiles_volume->cache_link);
kfree(fscache_volume)
cachefiles_withdraw_volume
fscache_withdraw_volume
fscache_volume->n_accesses
// fscache_volume UAF !!!
The fscache_volume in cache->volumes must not have been freed yet, but its
reference count may be 0. So use the new fscache_try_get_volume() helper
function try to get its reference count.
If the reference count of fscache_volume is 0, fscache_put_volume() is
freeing it, so wait for it to be removed from cache->volumes.
If its reference count is not 0, call cachefiles_withdraw_volume() with
reference count protection to avoid the above issue.
Fixes: fe2140e2f57f ("cachefiles: Implement volume support")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240628062930.2467993-3-libaokun@huaweicloud.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e715c9302b1c6fae990b9898a80fac855549d1f0 upstream.
Since we now want to sync the queues even when we're in RFKILL, we
shouldn't wake up the wait queue since we still expect to get all the
notifications from the firmware.
Fixes: 4d08c0b3357c ("wifi: iwlwifi: mvm: handle BA session teardown in RF-kill")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064027.be7a9dbeacde.I5586cb3ca8d6e44f79d819a48a0c22351ff720c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 321028bc45f01edb9e57b0ae5c11c5c3600d00ca upstream.
As noticed by syzbot, calling ieee80211_handle_queued_frames()
(and actually handling frames there) requires softirqs to be
disabled, since we call into the RX code. Fix that in the case
of cleaning up frames left over during shutdown.
Fixes: 177c6ae9725d ("wifi: mac80211: handle tasklet frames before stopping")
Reported-by: syzbot+1d516edf1e74469ba5d3@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20240626091559.cd6f08105a6e.I74778610a5ff2cf8680964698131099d2960352a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0941772342d59e48733131ac3a202fa1a4d832e9 upstream.
In nl80211, we always set the ssids of a scan request to
NULL when n_ssids==0 (passive scan). Drivers have relied
on this behaviour in the past, so we fixed it in 6 GHz
scan requests as well, and added a warning so we'd have
assurance the API would always be called that way.
syzbot found that wext doesn't ensure that, so we reach
the check and trigger the warning. Fix the wext code to
set the ssids pointer to NULL when there are none.
Reported-by: syzbot+cd6135193ba6bb9ad158@syzkaller.appspotmail.com
Fixes: f7a8b10bfd61 ("wifi: cfg80211: fix 6 GHz scan request building")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2cf6b7d15a28640117bf9f75dc050892cf78a6e8 upstream.
Once again, we've broken PASEMI Nemo boards with its incomplete
"interrupt-map" translations. Commit 935df1bd40d4 ("of/irq: Factor out
parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
changed the behavior resulting in the existing work-around not taking
effect. Rework the work-around to just skip parsing "interrupt-map" up
front by using the of_irq_imap_abusers list.
Fixes: 935df1bd40d4 ("of/irq: Factor out parsing of interrupt-map parent phandle+args from of_irq_parse_raw()")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86ed8ba2sp.wl-maz@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1a8f402f13f94263cf349216c257b2985100927 upstream.
This fixes the following deadlock introduced by 39a92a55be13
("bluetooth/l2cap: sync sock recv cb and release")
============================================
WARNING: possible recursive locking detected
6.10.0-rc3-g4029dba6b6f1 #6823 Not tainted
--------------------------------------------
kworker/u5:0/35 is trying to acquire lock:
ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_sock_recv_cb+0x44/0x1e0
but task is already holding lock:
ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_get_chan_by_scid+0xaf/0xd0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&chan->lock#2/1);
lock(&chan->lock#2/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kworker/u5:0/35:
#0: ffff888002b8a940 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
process_one_work+0x750/0x930
#1: ffff888002c67dd0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
at: process_one_work+0x44e/0x930
#2: ffff888002ec2510 (&chan->lock#2/1){+.+.}-{3:3}, at:
l2cap_get_chan_by_scid+0xaf/0xd0
To fix the original problem this introduces l2cap_chan_lock at
l2cap_conless_channel to ensure that l2cap_sock_recv_cb is called with
chan->lock held.
Fixes: 89e856e124f9 ("bluetooth/l2cap: sync sock recv cb and release")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c8bd922d924bb4ab6c6c488310157d1a27996f31 ]
Like other SPI controller flags, bits_per_word_mask may be used by a
peripheral driver, so it needs to reflect the capabilities of the
underlying controller.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-3-6c8845193128@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73810cd45b99c6c418e1c6a487b52c1e74edb20d ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...there are several warnings, and an error. This fixes all of those and
allows these tests to run and pass.
1. Fix linker error (undefined reference to memcpy) by providing a local
version of memcpy.
2. clang complains about using this form:
if (g = h & 0xf0000000)
...so factor out the assignment into a separate step.
3. The code is passing a signed const char* to elf_hash(), which expects
a const unsigned char *. There are several callers, so fix this at
the source by allowing the function to accept a signed argument, and
then converting to unsigned operations, once inside the function.
4. clang doesn't have __attribute__((externally_visible)) and generates
a warning to that effect. Fortunately, gcc 12 and gcc 13 do not seem
to require that attribute in order to build, run and pass tests here,
so remove it.
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f76f9bc616b7320df6789241ca7d26cedcf03cf3 ]
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang warns about mismatches between the expected and required
integer length being supplied to abs(3).
Fix this by using the correct variant of abs(3): labs(3) or llabs(3), in
these cases.
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82bb8db96610b558920b8c57cd250ec90567d79b ]
The HDaudio specification Section 3.6.2 limits the number of BDL entries to 256.
Make sure we don't allow more periods than this normative value.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240704090106.371497-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25a6e135569b3901452e4863c94560df7c11c492 ]
MS-SMB2 specification describes setting ->DeviceType to FILE_DEVICE_DISK
or FILE_DEVICE_CD_ROM. Set FILE_DEVICE_DISK instead of super magic in
FS_DEVICE_INFORMATION. And Set FILE_READ_ONLY_DEVICE for read-only share.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1762dc01fc78ef5f19693e9317eae7491c6c7e1b ]
On the OMAPL138, the SPI reference clock is provided by the Power and
Sleep Controller (PSC). The PSC's datasheet says that 'some peripherals
have special programming requirements and additional recommended steps
you must take before you can invoke the PSC module state transition'. I
didn't find more details in documentation but it appears that PSC needs
the SPI to clear the POWERDOWN bit before disabling the clock. Indeed,
when this bit is set, the PSC gets stuck in transitions from enable to
disable state.
Clear the POWERDOWN bit when releasing driver's resources
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20240624071745.17409-1-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce1dac560a74220f2e53845ec0723b562288aed4 ]
While in commit 2dd33f9cec90 ("spi: imx: support DMA for imx35") it was
claimed that DMA works on i.MX25, i.MX31 and i.MX35 the respective
device trees don't add DMA channels. The Reference manuals of i.MX31 and
i.MX25 also don't mention the CSPI core being DMA capable. (I didn't
check the others.)
Since commit e267a5b3ec59 ("spi: spi-imx: Use dev_err_probe for failed
DMA channel requests") this results in an error message
spi_imx 43fa4000.spi: error -ENODEV: can't get the TX DMA channel!
during boot. However that isn't fatal and the driver gets loaded just
fine, just without using DMA.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://patch.msgid.link/20240508095610.2146640-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 393da6cbb2ff89aadc47683a85269f913aa1c139 ]
ftrace_graph_ret_addr() takes an `idx` integer pointer that is used to
optimize the stack unwinding. Pass it a valid pointer to utilize the
optimizations that might be available in the future.
The commit is making riscv's usage of ftrace_graph_ret_addr() match
x86_64.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240618145820.62112-1-puranjay@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dd646cf745c34d31e7ed2a52265e9ca8308f58f ]
Currently, we stop all the counters while a new cpu is brought online.
However, the hpmevent to counter mappings are not reset. The firmware may
have some stale encoding in their mapping structure which may lead to
undesirable results. We have not encountered such scenario though.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240628-misc_perf_fixes-v4-2-e01cfddcf035@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ec17ce716bdaf680288ce680b4621b52483cc96 ]
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the
WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command
version in the firmware has advanced to 4, which prevents the
flag from being set correctly, fix that.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a396680965df1b53d4096@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 391b59b045004d5b985d033263ccba3e941a7740 ]
Jan reported that 'cd ..' may take a long time in deep directory
hierarchies under a bind-mount. If concurrent renames happen it is
possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and
then acquire the rename lock to handle deep ancestor chains better. The
list of alternatives to this approach were less then pleasant. Change
the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed
effectively the same thing just that one version ended up being slightly
more elegant.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9da45c88e124f13a3c4d480b89b298e007fbb9e4 ]
In the ref-verify tool, when processing the inline references of an extent
item, we may end up returning with uninitialized return value, because:
1) The 'ret' variable is not initialized if there are no inline extent
references ('ptr' == 'end' before the while loop starts);
2) If we find an extent owner inline reference we don't initialize 'ret'.
So fix these cases by initializing 'ret' to 0 when declaring the variable
and set it to -EINVAL if we find an extent owner inline references and
simple quotas are not enabled (as well as print an error message).
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/59b40ebe-c824-457d-8b24-0bbca69d472b@gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb15dcbcf4f212930350eaee174bb60ed40a536 ]
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ad4b4a2f6357c45fbe444ead1a929a0b4017d03 ]
[Why]
Potential out of bounds access in dml2_calculate_rq_and_dlg_params()
because the value of out_lowest_state_idx used as an index for FCLKChangeSupport
array can be greater than 1.
[How]
Currently dml2 core specifies identical values for all FCLKChangeSupport
elements. Always use index 0 in the condition to avoid out of bounds access.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ef1548aeaa8858e7aee2152bf95cc71cdcd6dff ]
[Why]
Some of the panels does not have the refresh rate range info
in base EDID and only have the refresh rate range info in
DisplayID block.
It will cause the max/min freesync refresh rate set to 0.
[How]
Try to parse the refresh rate range info from DisplayID if the
max/min refresh rate is 0.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 074b3a886713f69d98d30bb348b1e4cb3ce52b22 ]
[Description]
We need to ensure to take into account cursor prefetch BW in
mode support or we may pass ModeQuery but fail an actual flip
which will cause a hang. Flip may fail because the cursor_pre_bw
is populated during mode programming (and mode programming is
never called prior to ModeQuery).
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74ad26b36d303ac233eccadc5c3a8d7ee4709f31 ]
[Why]
We only enable the VRR while monitor usable refresh rate range
is greater than 10 Hz.
But we did not check the range in DRM_EDID_FEATURE_CONTINUOUS_FREQ
case.
[How]
Add a refresh rate range check before set the freesync_capable flag
in DRM_EDID_FEATURE_CONTINUOUS_FREQ case.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b32b063be1001e322c5f6e01f2a649636947851 ]
Sometimes, the on-disk metadata might be invalid due to user
interrupts, storage failures, or other unknown causes.
In that case, z_erofs_map_blocks_iter() may still return a valid
m_llen while other fields remain invalid (e.g., m_plen can be 0).
Due to the return value of z_erofs_scan_folio() in some path will
be ignored on purpose, the following z_erofs_scan_folio() could
then use the invalid value by accident.
Let's reset m_llen to 0 to prevent this.
Link: https://lore.kernel.org/r/20240629185743.2819229-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89e856e124f9ae548572c56b1b70c2255705f8fe ]
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer.
Reported-and-tested-by: syzbot+b7f6f8c9303466e16c8a@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4183a7be77009fc31c5760429fe095f163bf96a9 ]
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d151a103775dd9645c78c97f77d6e2a5298d913 ]
syzbot is reporting that calling hci_release_dev() from hci_error_reset()
due to hci_dev_put() from hci_error_reset() can cause deadlock at
destroy_workqueue(), for hci_error_reset() is called from
hdev->req_workqueue which destroy_workqueue() needs to flush.
We need to make sure that hdev->{rx_work,cmd_work,tx_work} which are
queued into hdev->workqueue and hdev->{power_on,error_reset} which are
queued into hdev->req_workqueue are no longer running by the moment
destroy_workqueue(hdev->workqueue);
destroy_workqueue(hdev->req_workqueue);
are called from hci_release_dev().
Call cancel_work_sync() on these work items from hci_unregister_dev()
as soon as hdev->list is removed from hci_dev_list.
Reported-by: syzbot <syzbot+da0a9c9721e36db712e8@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=da0a9c9721e36db712e8
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0556255a53d6d3d406a28362dffd972018a997c ]
The 'missing-field-initializers' warning was reported
when building with W=2.
This patch use designated initializers for
'struct ffa_send_direct_data' to suppress the warning
and clarify the initialization intent.
Signed-off-by: ming-jen.chang <ming-jen.chang@mediatek.com>
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab2068a6fb84751836a84c26ca72b3beb349619d ]
The expander phy will be treated as broadcast flutter in the next
revalidation after the exp-attached end device probe failed, as follows:
[78779.654026] sas: broadcast received: 0
[78779.654037] sas: REVALIDATING DOMAIN on port 0, pid:10
[78779.654680] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78779.662977] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78779.662986] sas: ex 500e004aaaaaaa1f phy05 new device attached
[78779.663079] sas: ex 500e004aaaaaaa1f phy05:U:8 attached: 500e004aaaaaaa05 (stp)
[78779.693542] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] found
[78779.701155] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
[78779.707864] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
...
[78835.161307] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 tries: 1
[78835.171344] sas: sas_probe_sata: for exp-attached device 500e004aaaaaaa05 returned -19
[78835.180879] hisi_sas_v3_hw 0000:b4:02.0: dev[16:5] is gone
[78835.187487] sas: broadcast received: 0
[78835.187504] sas: REVALIDATING DOMAIN on port 0, pid:10
[78835.188263] sas: ex 500e004aaaaaaa1f phy05 change count has changed
[78835.195870] sas: ex 500e004aaaaaaa1f phy05 originated BROADCAST(CHANGE)
[78835.195875] sas: ex 500e004aaaaaaa1f rediscovering phy05
[78835.196022] sas: ex 500e004aaaaaaa1f phy05:U:A attached: 500e004aaaaaaa05 (stp)
[78835.196026] sas: ex 500e004aaaaaaa1f phy05 broadcast flutter
[78835.197615] sas: done REVALIDATING DOMAIN on port 0, pid:10, res 0x0
The cause of the problem is that the related ex_phy's attached_sas_addr was
not cleared after the end device probe failed, so reset it.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240619091742.25465-1-yangxingui@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1216e62d039bf63a539bbe718536ec789a853dd ]
If a PCI device is removed during eeh_pe_report_edev(), edev->pdev
will change and can cause a crash, hold the PCI rescan/remove lock
while taking a copy of edev->pdev->bus.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240617140240.580453-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ba8425678af422da37b6c9b50e9ce66f0f55cae ]
Since the CONFIG_CTL register is only 32 bits wide in the Stromer
and Stromer Plus PLLs , the 'config_ctl_hi_val' values from the
IPQ5018 and IPQ5332 configurations are not used so remove those.
No functional changes.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240509-stromer-config-ctl-v1-1-6034e17b28d5@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63b47f026cc841bd3d3438dd6fccbc394dfead87 ]
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c223376b3019a00a0241faea0bc8c966738d1cc5 ]
[Why]
SMU firmware has not supported MALL PG.
[How]
Disable MALL PG and make it always on until SMU firmware is ready.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a7db25aad8ce6512b366d2ce1d0e60bac00a09d ]
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
