- Add SAR2130P compatible to DT bindings in the QCom Tsens driver (Dmitry
Baryshkov).
- Add static annotation to arrays describing platform sensors in the
LVTS Mediatek driver (Colin Ian King).
- Switch back to struct platform_driver::remove() from the previous
callbacks prototype rework (Uwe Kleine-König).
- Add MSM8937 compatible to DT bindings and its support in the QCom
Tsens driver (Barnabás Czémán).
- Remove a pointless sign test on an unsigned value in k3_bgp_read_temp()
in the k3_j72xx_bandgap driver (Rex Nie).
- Fix a pointer reference loss when realloc() fails in the thermal
library (Zhang Jiao).
-----BEGIN PGP SIGNATURE-----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=cXi4
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These update a few thermal drivers used on ARM platforms and thermal
tools:
- Add SAR2130P compatible to DT bindings in the QCom Tsens driver
(Dmitry Baryshkov)
- Add static annotation to arrays describing platform sensors in the
LVTS Mediatek driver (Colin Ian King)
- Switch back to struct platform_driver::remove() from the previous
callbacks prototype rework (Uwe Kleine-König)
- Add MSM8937 compatible to DT bindings and its support in the QCom
Tsens driver (Barnabás Czémán)
- Remove a pointless sign test on an unsigned value in
k3_bgp_read_temp() in the k3_j72xx_bandgap driver (Rex Nie)
- Fix a pointer reference loss when realloc() fails in the thermal
library (Zhang Jiao)"
* tag 'thermal-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/thermal: Fix common realloc mistake
thermal/drivers/k3_j72xx_bandgap: Simplify code in k3_bgp_read_temp()
thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
dt-bindings: thermal: tsens: Add MSM8937
thermal: Switch back to struct platform_driver::remove()
thermal/drivers/mediatek/lvts_thermal: Make read-only arrays static const
dt-bindings: thermal: qcom-tsens: Add SAR2130P compatible
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
driver (Dmitry Baryshkov)
- Add the static annotation to the arrays describing the platform
sensors on the LVTS Mediatek driver (Colin Ian King)
- Switch back to the struct platform_driver::remove() from the
previous callbacks prototype rework (Uwe Kleine-König)
- Add the MSM8937 compatible in the DT bindings and its support in the
QCom Tsens driver (Barnabás Czémán)
- Remove a pointless sign test on an unsigned value in
k3_bgp_read_temp() function on the k3_j72xx_bandgap driver (Rex Nie)
- Fix a pointer reference lost when the call to realloc() fails in the
thermal library (Zhang Jiao)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmc7H/kACgkQqDIjiipP
6E/9sAf9HrD7EP00USQgcAszQ0mXvPEAZZIuolh9W43erYq75hzsmc7HUko1PLM6
+0j19aaf7TZl51G5GYayPL/hj6b5Ic3+nqx+cyDGpSyb9jNVmou5Awo01ny/RDWw
DK0q9HLXKfLD7RcxrDTneRkqhyz5ffeB9sgzTa+qK1NHhXFGDnLTWHdQv+/Hw1Py
8FFGZbwCadFb7C6n38YH0NJrs1W4S7CQsADMGraTEq0JsX6l0vuEW/0iM0FZjtRN
6tJcId2DcEmvzYu2tz4pjeKqD+ClKwplo4UjcNyMsnXWVqB5DnFzUjrvlAc1UIof
O9WqNV0xwZBSiM1uwm5T9r7hIzYaMQ==
=KBXG
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of thermal drivers for 6.13-rc1 from Daniel Lezcano:
"- Add the SAR2130P compatible in the DT bindings for the QCom Tsens
driver (Dmitry Baryshkov)
- Add the static annotation to the arrays describing the platform
sensors on the LVTS Mediatek driver (Colin Ian King)
- Switch back to the struct platform_driver::remove() from the
previous callbacks prototype rework (Uwe Kleine-König)
- Add the MSM8937 compatible in the DT bindings and its support in the
QCom Tsens driver (Barnabás Czémán)
- Remove a pointless sign test on an unsigned value in
k3_bgp_read_temp() function on the k3_j72xx_bandgap driver (Rex Nie)
- Fix a pointer reference lost when the call to realloc() fails in the
thermal library (Zhang Jiao)"
* tag 'thermal-v6.13-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
tools/thermal: Fix common realloc mistake
thermal/drivers/k3_j72xx_bandgap: Simplify code in k3_bgp_read_temp()
thermal/drivers/qcom/tsens-v1: Add support for MSM8937 tsens
dt-bindings: thermal: tsens: Add MSM8937
thermal: Switch back to struct platform_driver::remove()
thermal/drivers/mediatek/lvts_thermal: Make read-only arrays static const
dt-bindings: thermal: qcom-tsens: Add SAR2130P compatible
with the purpose of using such hints when making scheduling decisions
- Determine the boost enumerator for each AMD core based on its type: efficiency
or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective core
- Add a feature flag to denote AMD cores which have heterogeneous topology and
enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
-----BEGIN PGP SIGNATURE-----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=420r
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Add a feature flag which denotes AMD CPUs supporting workload
classification with the purpose of using such hints when making
scheduling decisions
- Determine the boost enumerator for each AMD core based on its type:
efficiency or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective
core
- Add a feature flag to denote AMD cores which have heterogeneous
topology and enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
* tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu()
x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM()
x86/cpu: Fix formatting of cpuid_bits[] in scattered.c
x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit
x86/amd: Use heterogeneous core topology for identifying boost numerator
x86/cpu: Add CPU type to struct cpuinfo_topology
x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD
x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES
x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
Variables annotated with __free() need to be initialized if the function
can return before they get updated for the first time or the attempt to
free the memory pointed to by them upon function return may crash the
kernel.
Fix this issue in some places in the thermal testing code.
Fixes: f6a034f2df ("thermal: Introduce a debugfs-based testing facility")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12576267.O9o76ZdvQC@rjwysocki.net
Use DEFINE_FREE() to define a __free function for dropping thermal
zone template reference counters and use it along with __free() to
simplify code in some places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4628747.LvFx2qVVIh@rjwysocki.net
[ rjw: Add variable initialization to address compiler warning ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The return value of vtm_get_best_value() always >= 0, remove always
false expression 'dtemp < 0' in if statement.
Signed-off-by: Rex Nie <rex.nie@jaguarmicro.com>
Link: https://lore.kernel.org/r/20241113005412.2254-1-rex.nie@jaguarmicro.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add support for tsens v1.4 block what can be found in
MSM8937 and MSM8917.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241113-msm8917-v6-5-c348fb599fef@mainlining.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/thermal to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
On the way make a few whitespace changes to make indention consistent.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241019163412.304422-2-u.kleine-koenig@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Don't populate the read-only arrays on the stack at run time, instead
make them static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20241022184622.1296044-1-colin.i.king@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notice that tt_get_tt_zone() need not use the ret variable in
the tt_thermal_zones list walk and make it return right after
incrementing the reference counter of the matching entry.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6120304.lOV4Wx5bFT@rjwysocki.net
Although the current device tree binding of thermal zones require the
trips subnode, the binding in kernel v5.15 does not require it, and many
device trees shipped with the kernel, for example,
allwinner/sun50i-a64.dtsi and mediatek/mt8183-kukui.dtsi in ARM64, still
comply to the old binding and contain no trips subnode.
Allow the code to successfully register thermal zones w/o trips subnode
for DT binding compatibility now.
Furtherly, the inconsistency between DTs and bindings should be resolved
by either adding empty trips subnode or dropping the trips subnode
requirement.
Fixes: d0c75fa2c1 ("thermal/of: Initialize trip points separately")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
[wenst@chromium.org: Reworked logic and kernel log messages]
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20241018073139.1268995-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When total_req_power is 0, divvy_up_power() will set granted_power to 0,
and cdev will be limited to the lowest performance. If our polling delay
is set to 200ms, it means that cdev cannot perform better within 200ms
even if cdev has a sudden load. This will affect the performance of cdev
and is not as expected.
For this reason, if nobody requests power, then set the granted power to
the max_power.
Signed-off-by: ZhengShaobo <zhengshaobo1@xiaomi.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241021121138.422-1-zhengshaobo1@xiaomi.com
[ rjw: Fixed up tags ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move thermal_zone_device_init() along with thermal_zone_device_check()
closer to the callers of the former, where they fit better together.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1906685.CQOukoFCf9@rjwysocki.net
Modify the thermal core to use three lists of trip points:
trips_high, containing trips with thresholds strictly above the current
thermal zone temperature,
trips_reached, containing trips with thresholds at or below the current
zone temperature,
trips_invalid, containing trips with temperature equal to
THERMAL_ZONE_INVALID,
where the first two lists are always sorted by the current trip
threshold.
For each trip in trips_high, there is no mitigation under way and
the trip threshold is equal to its temperature. In turn, for each
trip in trips_reached, there is mitigation under way and the trip
threshold is equal to its low temperature. The trips in trips_invalid,
of course, need not be taken into consideration.
The idea is to make __thermal_zone_device_update() walk trips_high and
trips_reached instead of walking the entire table of trip points in a
thermal zone. Usually, it will only need to walk a few entries in one
of the lists and check one entry in the other list, depending on the
direction of the zone temperature changes, because crossing many trips
by the zone temperature in one go between two consecutive temperature
checks should be unlikely (if it occurs often, the thermal zone
temperature should probably be checked more often either or there
are too many trips).
This also helps to eliminate one temporary trip list used for trip
crossing notification (only one temporary list is needed for this
purpose instead of two) and the remaining temporary list may be sorted
by the current trip threshold value, like the trips_reached list, so
the additional notify_temp field in struct thermal_trip_desc is not
necessary any more.
Moreover, since the trips_reached and trips_high lists are sorted,
the "low" and "high" values needed by thermal_zone_set_trips() can be
determined in a straightforward way by looking at one end of each list.
Of course, additional work is needed in some places in order to
maintain the ordering of the lists, but it is limited to situations
that should be rare, like updating a trip point temperature or
hysteresis, thermal zone initialization, or system resume.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2003443.usQuhbGJ8B@rjwysocki.net
[ rjw: Added a comment to thermal_zone_handle_trips() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since thermal_zone_set_trip_temp() is now located in the same file
as thermal_trip_crossed(), it can invoke the latter directly without
using the thermal_zone_trip_down() wrapper that has no other users.
Update thermal_zone_set_trip_temp() accordingly and drop
thermal_zone_trip_down().
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1807510.VLH7GnMWUR@rjwysocki.net
In preparation for subsequent changes, move two functions used
for updating trip points, thermal_zone_set_trip_temp() and
thermal_zone_set_trip_hyst(), to thermal_core.c.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/3248558.5fSG56mABF@rjwysocki.net
Notice that some processing related to trip point crossing carried out
in handle_thermal_trip() and thermal_zone_set_trip_temp() may as well
be done in thermal_trip_crossed(), which allows code duplication to be
reduced, so change the code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/1982859.PYKUYFuaPT@rjwysocki.net
In preparation for subsequent changes, modify thermal_trip_crossed()
to take a trip descriptor pointer instead of a pointer to struct
thermal_trip and propagate this change to thermal_zone_trip_down().
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/10547668.nUPlyArG6x@rjwysocki.net
In preparation for subsequent changes, move the invocations of
thermal_thresholds_handle() and thermal_zone_set_trips() in
__thermal_zone_device_update() after the processing of the
temporary trip lists.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/3323276.44csPzL39Z@rjwysocki.net
Subsequently, trips will be moved between sorted lists in multiple
places, so replace add_trip_to_sorted_list() with an analogous
function, move_trip_to_sorted_list(), that will move a given trip
to a given sorted list.
To allow list_del() used in the new function to work, initialize the
list_node fields in trip descriptors where applicable so they are
always valid.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2960197.e9J7NaK4W3@rjwysocki.net
Since the list node field in struct thermal_trip_desc is going to be
used for purposes other than trip crossing notification, rename it
to list_node.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2201558.irdbgypaU6@rjwysocki.net
Since it is not expected that multiple trip points will be crossed
in one go very often (if this happens, there are too many trip points
in the given thermal zone or they are checked too rarely), quite likely
it is more efficient to build a sorted list of crossed trip points than
to put them on an unsorted list and sort it later.
Moreover, trip points are often sorted in ascending temperature order
during thermal zone registration, so building a sorted list out of
them is quite straightforward and relatively inexpensive.
Accordingly, make handle_thermal_trip() maintain list ordering when
adding trip points to the lists and get rid of separate list sorting
in __thermal_zone_device_update().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/4930656.GXAFRqVoOG@rjwysocki.net
When the thermal zone is unregistered (thermal sensor module being
unloaded), no lock is held when flushing the thresholds. That results
in a WARN when the lockdep validation is set in the kernel config.
This has been reported by syzbot.
As the thermal zone is in the process of being destroyed, there is no
need to send a notification about purging the thresholds to the
userspace as this one will receive a thermal zone deletion
notification which imply the deletion of all the associated resources
like the trip points or the user thresholds.
Split the function thermal_thresholds_flush() into a lockless one
without notification and its call with the lock annotation followed
with the thresholds flushing notification.
Please note this scenario is unlikely to happen, as the sensor drivers
are usually compiled-in in order to have the thermal framework to be
able to kick in at boot time if needed.
Fixes: 445936f9e2 ("thermal: core: Add user thresholds support")
Link: https://lore.kernel.org/all/67124175.050a0220.10f4f4.0012.GAE@google.com
Reported-by: syzbot+f24dd060c1911fe54c85@syzkaller.appspotmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20241024102303.1086147-1-daniel.lezcano@linaro.org
[ rjw: Subject edit, added Fixes tag ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The thresholds exist but there is no notification neither action code
related to them yet.
These changes implement the netlink for the notifications when the
thresholds are crossed, added, deleted or flushed as well as the
commands which allows to get the list of the thresholds, flush them,
add and delete.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-3-daniel.lezcano@linaro.org
[ rjw: Use the thermal_zone guard for locking, subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch over the thermal core to using a mutex guard for
thermal_governor_lock management.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3679429.R56niFO833@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
In preparation for a subsequent change that will switch over the thermal
core to using a mutex guard for managing thermal_governor_lock, move
the code running in thermal_zone_device_register_with_trips() under that
lock into a separate function called thermal_zone_init_governor().
While at it, drop a useless comment.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4408795.ejJDZkT8p0@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Add and use a special guard for cooling devices.
This allows quite a few error code paths to be simplified among
other things and brings in code size reduction for a good measure.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5837621.DvuYhMxLoT@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Three thermal governors call __thermal_cdev_update() under the
cdev lock without doing any checks, so in order to reduce the
related code duplication, introduce a new helper function called
thermal_cdev_update_nocheck() for them and make them use it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1835097.VLH7GnMWUR@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
It is not necessary to walk the thermal_instances list in a trip
descriptor under a cooling device lock, so acquire that lock only
for deleting the given thermal instance from the list of thermal
instances in the given cdev.
Moreover, in analogy with the previous change that introduced
thermal_instance_add(), put the code deleting the given thermal
instance from the lists it is on into a separate new function
called thermal_instance_delete().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3275745.5fSG56mABF@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
To reduce the number of redundant result checks in
thermal_bind_cdev_to_trip() and make the code in it easier to
follow, move some of it to a new function called thermal_instance_add()
and make thermal_bind_cdev_to_trip() invoke that function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3618899.iIbC2pHGDl@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Holding a cooling device lock under thermal_governor_update_tz() is not
necessary and it may cause lockdep to complain if any governor's
.update_tz() callback attempts to lock a cdev.
For this reason, move the thermal_governor_update_tz() calls in
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip() from
under the cdev lock.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/7749552.EvYhyI6sBW@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Switch over the thermal core to using a mutex guard for
thermal_list_lock management.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2010397.PYKUYFuaPT@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
To prepare for a subsequent change that will switch over the thermal
core to using a mutex guard for thermal_list_lock management, move the
code running under thermal_list_lock during the initialization and
unregistration of cooling devices into separate functions.
While at it, drop some comments that do not add value.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10572828.nUPlyArG6x@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Add a guard for unlocking a locked thermal zone temporarily and use it
in thermal_zone_pm_prepare().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3344086.aeNJFYEL58@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Add and use a guard for thermal zone locking.
This allows quite a few error code paths to be simplified among
other things and brings in a noticeable code size reduction for
a good measure.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1930069.tdWV9SEqCh@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
The code is somewhat cleaner if struct thermal_trip_desc pointers are
passed to thermal_bind_cdev_to_trip(), thermal_unbind_cdev_from_trip(),
and print_bind_err_msg() instead of struct thermal_trip pointers, so
modify it accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2246211.NgBsaNRSFp@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
In almost all places where a thermal zone's list of thermal instances
is walked, there is a check to match a specific trip point and it is
walked in vain whenever there are no cooling devices associated with
the given trip.
To address this, store the lists of thermal instances in trip point
descriptors instead of storing them in thermal zones and adjust all
code using those lists accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5522726.Sb9uPGUboI@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
After previous changes, the need_update field in struct thermal_zone_device
is only set and never read, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2495061.jE0xQCEvom@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
If a new cooling device is registered and it is bound to at least one
trip point in a given thermal zone, that thermal zone needs to be
updated via __thermal_zone_device_update().
Instead of doing this with the help of the need_update atomic field in
struct thermal_zone_device, which is not particularly straightforward,
make __thermal_zone_cdev_bind() return a bool value indicating whether
or not the given thermal zone needs to be updated because a new cooling
device has been bound to it and update thermal_zone_cdev_bind() to
call __thermal_zone_device_update() when this value is "true".
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2226302.Icojqenx9y@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
In analogy with a previous change in the thermal zone initialization
path, to avoid acquiring the thermal zone lock and releasing it multiple
times back and forth unnecessarily, move all of the code running under
thermal_list_lock in thermal_zone_device_unregister() into a new
function called thermal_zone_exit() and make the latter acquire the
thermal zone lock only once and release it along with thermal_list_lock.
For this purpose, provide an "unlocked" variant of
thermal_zone_cdev_unbind() to be called by thermal_zone_exit() under the
thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1963152.taCxCBeP46@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
In analogy with a previous change in the thermal zone registration code
path, to ensure that __thermal_zone_device_update() will return early
for thermal zones that are going away, introduce a thermal zone state
flag representing the "exit" state and set it while deleting the thermal
zone from thermal_tz_list.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4394176.ejJDZkT8p0@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
The part of thermal zone initialization carried out under
thermal_list_lock acquires the thermal zone lock and releases it
multiple times back and forth which is not really necessary.
Instead of doing this, make it acquire the thermal zone lock once after
acquiring thermal_list_lock and release it along with that lock.
For this purpose, move all of the code in question to
thermal_zone_init_complete() introduced previously and provide an
"unlocked" variant of thermal_zone_cdev_bind() to be invoked from
there.
Also notice that a thermal zone does not need to be added to
thermal_tz_list under its own lock, so make the new code acquire
the thermal zone lock after adding it to the list.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1920382.CQOukoFCf9@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Rebase on top of recent thermal core changes ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the registration of a thermal zone takes place at the time when
system suspend is started, thermal_pm_notify() can run before the new
thermal zone is added to thermal_tz_list and its "suspended" flag will
not be set. Consequently, if __thermal_zone_device_update() is called
for that thermal zone, it will not return early as expected which may
cause some destructive interference with the system suspend or resume
flow to occur.
To avoid that, make thermal_zone_init_complete() introduced previously
set the "suspended" flag for new thermal zones if it runs during system
suspend or resume.
Fixes: 4e814173a8 ("thermal: core: Fix thermal zone suspend-resume synchronization")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8490245.NyiUUSuA9g@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
After thermal_zone_device_register_with_trips() has called
device_register() and it has registered the new thermal zone device
with the driver core, user space may access its sysfs attributes and,
among other things, it may enable the thermal zone before it is ready.
To address this, introduce a new thermal zone state flag for
initialization and set it before calling device_register() in
thermal_zone_device_register_with_trips(). This causes
__thermal_zone_device_update() to return early until the new flag
is cleared.
To clear it when the thermal zone is ready, introduce a new
function called thermal_zone_init_complete() that will also invoke
__thermal_zone_device_update() after clearing that flag (both under the
thernal zone lock) and make thermal_zone_device_register_with_trips()
call the new function instead of checking need_update and calling
thermal_zone_device_update() when it is set.
After this change, if user space enables the thermal zone prematurely,
__thermal_zone_device_update() will return early for it until
thermal_zone_init_complete() is called. In turn, if the thermal zone
is not enabled by user space before thermal_zone_init_complete() is
called, the __thermal_zone_device_update() call in it will return early
because the thermal zone has not been enabled yet, but that function
will be invoked again by thermal_zone_device_set_mode() when the thermal
zone is enabled and it will not return early this time.
The checking of need_update is not necessary any more because the
__thermal_zone_device_update() calls potentially triggered by cooling
device binding take place before calling thermal_zone_init_complete(),
so they all will return early, which means that
thermal_zone_init_complete() must call __thermal_zone_device_update()
in case the thermal zone is enabled prematurely by user space.
Fixes: 203d3d4aa4 ("the generic thermal sysfs driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9360231.CDJkKcVGEf@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Instead of using two separate fields in struct thermal_zone_device for
representing flags related to thermal zone suspend, represent them
explicitly as bits in one u8 "state" field.
Subsequently, that field will be used for addressing race conditions
related to thermal zone initialization and exit.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/7733910.EvYhyI6sBW@rjwysocki.net
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
