mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-06 13:16:22 +00:00
f6e1dcd644
1316755 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Hangbin Liu
|
f6e1dcd644 |
selftests/rtnetlink.sh: add mngtempaddr test
Add a test to check the temporary address could be added/removed correctly when mngtempaddr is set or removed/unmanaged. Signed-off-by: Sam Edwards <cfsworks@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Hangbin Liu
|
00b5b7aab9 |
net/ipv6: delete temporary address if mngtmpaddr is removed or unmanaged
RFC8981 section 3.4 says that existing temporary addresses must have their
lifetimes adjusted so that no temporary addresses should ever remain "valid"
or "preferred" longer than the incoming SLAAC Prefix Information. This would
strongly imply in Linux's case that if the "mngtmpaddr" address is deleted or
un-flagged as such, its corresponding temporary addresses must be cleared out
right away.
But now the temporary address is renewed even after ‘mngtmpaddr’ is removed
or becomes unmanaged as manage_tempaddrs() set temporary addresses
prefered/valid time to 0, and later in addrconf_verify_rtnl() all checkings
failed to remove the addresses. Fix this by deleting the temporary address
directly for these situations.
Fixes:
|
||
|
Choong Yong Liang
|
59c5e1411a |
net: stmmac: set initial EEE policy configuration
Set the initial eee_cfg values to have 'ethtool --show-eee ' display
the initial EEE configuration.
Fixes:
|
||
|
Paolo Abeni
|
70ab873797 |
Merge branch 'correcting-switch-hardware-versions-and-reported-speeds'
Justin Lai says: ==================== Correcting switch hardware versions and reported speeds This patch set mainly involves correcting switch hardware versions and reported speeds. Details are as follows: 1. Refactor the rtase_check_mac_version_valid() function. 2. Correct the speed for RTL907XD-V1 3. Corrects error handling of the rtase_check_mac_version_valid() v1 -> v2: - Add Fixes: tag. - Add defines for hardware version id. - Modify the error message for an invalid hardware version ID. v2 -> v3: - Remove the patch "Add support for RTL907XD-VA PCIe port". v3 -> v4: - Modify commit message to describe the main reason for the fix. v4 -> v5 - Integrate the addition of defines for hardware version ID into the patch "rtase: Refactor the rtase_check_mac_version_valid() function." ==================== Link: https://patch.msgid.link/20241120075624.499464-1-justinlai0215@realtek.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Justin Lai
|
a01cfcfda5 |
rtase: Corrects error handling of the rtase_check_mac_version_valid()
Previously, when the hardware version ID was determined to be invalid,
only an error message was printed without any further handling. Therefore,
this patch makes the necessary corrections to address this.
Fixes:
|
||
|
Justin Lai
|
c1fc14c4df |
rtase: Correct the speed for RTL907XD-V1
Previously, the reported speed was uniformly set to SPEED_5000, but the
RTL907XD-V1 actually operates at a speed of SPEED_10000. Therefore, this
patch makes the necessary correction.
Fixes:
|
||
|
Justin Lai
|
a1f8609ff1 |
rtase: Refactor the rtase_check_mac_version_valid() function
Different hardware requires different configurations, but this distinction
was not made previously. Additionally, the error message was not clear
enough. Therefore, this patch will address the issues mentioned above.
Fixes:
|
||
|
Sidraya Jayagond
|
ebaf81317e |
s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()
Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount
(skb->users) and iucv_sock_recvmsg() does not decrement skb refcount
at exit.
This results in skb memory leak in skb_queue_purge() and WARN_ON in
iucv_sock_destruct() during socket close. To fix this decrease
skb refcount by one if MSG_PEEK is set in order to prevent memory
leak and WARN_ON.
WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv]
CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv]
[<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv]
[<001587c704117a32>] __sk_destruct+0x52/0x550
[<001587c704104a54>] __sock_release+0xa4/0x230
[<001587c704104c0c>] sock_close+0x2c/0x40
[<001587c702c5f5a8>] __fput+0x2e8/0x970
[<001587c7024148c4>] task_work_run+0x1c4/0x2c0
[<001587c7023b0716>] do_exit+0x996/0x1050
[<001587c7023b13aa>] do_group_exit+0x13a/0x360
[<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60
[<001587c7022bccca>] do_syscall+0x27a/0x380
[<001587c7049a6a0c>] __do_syscall+0x9c/0x160
[<001587c7049ce8a8>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv]
Fixes:
|
||
|
James Chapman
|
5d066766c5 |
net/l2tp: fix warning in l2tp_exit_net found by syzbot
In l2tp's net exit handler, we check that an IDR is empty before
destroying it:
WARN_ON_ONCE(!idr_is_empty(&pn->l2tp_tunnel_idr));
idr_destroy(&pn->l2tp_tunnel_idr);
By forcing memory allocation failures in idr_alloc_32, syzbot is able
to provoke a condition where idr_is_empty returns false despite there
being no items in the IDR. This turns out to be because the radix tree
of the IDR contains only internal radix-tree nodes and it is this that
causes idr_is_empty to return false. The internal nodes are cleaned by
idr_destroy.
Use idr_for_each to check that the IDR is empty instead of
idr_is_empty to avoid the problem.
Reported-by: syzbot+332fe1e67018625f63c9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=332fe1e67018625f63c9
Fixes:
|
||
|
Jakub Kicinski
|
9bb88c6596 |
selftests: net: test extacks in netlink dumps
Test that extacks in dumps work. The test fills up the receive buffer to test both the inline dump (as part of sendmsg()) and delayed one (run during recvmsg()). Use YNL helpers to parse the messages. We need to add the test to YNL file to make sure the right include path are used. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241119224432.1713040-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
3bf39fa849 |
netlink: fix false positive warning in extack during dumps
Commit under fixes extended extack reporting to dumps.
It works under normal conditions, because extack errors are
usually reported during ->start() or the first ->dump(),
it's quite rare that the dump starts okay but fails later.
If the dump does fail later, however, the input skb will
already have the initiating message pulled, so checking
if bad attr falls within skb->data will fail.
Switch the check to using nlh, which is always valid.
syzbot found a way to hit that scenario by filling up
the receive queue. In this case we initiate a dump
but don't call ->dump() until there is read space for
an skb.
WARNING: CPU: 1 PID: 5845 at net/netlink/af_netlink.c:2210 netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
RIP: 0010:netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209
Call Trace:
<TASK>
netlink_dump_done+0x513/0x970 net/netlink/af_netlink.c:2250
netlink_dump+0x91f/0xe10 net/netlink/af_netlink.c:2351
netlink_recvmsg+0x6bb/0x11d0 net/netlink/af_netlink.c:1983
sock_recvmsg_nosec net/socket.c:1051 [inline]
sock_recvmsg+0x22f/0x280 net/socket.c:1073
__sys_recvfrom+0x246/0x3d0 net/socket.c:2267
__do_sys_recvfrom net/socket.c:2285 [inline]
__se_sys_recvfrom net/socket.c:2281 [inline]
__x64_sys_recvfrom+0xde/0x100 net/socket.c:2281
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff37dd17a79
Reported-by: syzbot+d4373fa8042c06cefa84@syzkaller.appspotmail.com
Fixes:
|
||
|
Guenter Roeck
|
f164b29663 |
net: microchip: vcap: Add typegroup table terminators in kunit tests
VCAP API unit tests fail randomly with errors such as
# vcap_api_iterator_init_test: EXPECTATION FAILED at drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:387
Expected 134 + 7 == iter.offset, but
134 + 7 == 141 (0x8d)
iter.offset == 17214 (0x433e)
# vcap_api_iterator_init_test: EXPECTATION FAILED at drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:388
Expected 5 == iter.reg_idx, but
iter.reg_idx == 702 (0x2be)
# vcap_api_iterator_init_test: EXPECTATION FAILED at drivers/net/ethernet/microchip/vcap/vcap_api_kunit.c:389
Expected 11 == iter.reg_bitpos, but
iter.reg_bitpos == 15 (0xf)
# vcap_api_iterator_init_test: pass:0 fail:1 skip:0 total:1
Comments in the code state that "A typegroup table ends with an all-zero
terminator". Add the missing terminators.
Some of the typegroups did have a terminator of ".offset = 0, .width = 0,
.value = 0,". Replace those terminators with "{ }" (no trailing ',') for
consistency and to excplicitly state "this is a terminator".
Fixes:
|
||
|
Oleksij Rempel
|
e863ff806f |
net: usb: lan78xx: Fix refcounting and autosuspend on invalid WoL configuration
Validate Wake-on-LAN (WoL) options in `lan78xx_set_wol` before calling
`usb_autopm_get_interface`. This prevents USB autopm refcounting issues
and ensures the adapter can properly enter autosuspend when invalid WoL
options are provided.
Fixes:
|
||
|
Pavan Chebbi
|
614f4d166e |
tg3: Set coherent DMA mask bits to 31 for BCM57766 chipsets
The hardware on Broadcom 1G chipsets have a known limitation
where they cannot handle DMA addresses that cross over 4GB.
When such an address is encountered, the hardware sets the
address overflow error bit in the DMA status register and
triggers a reset.
However, BCM57766 hardware is setting the overflow bit and
triggering a reset in some cases when there is no actual
underlying address overflow. The hardware team analyzed the
issue and concluded that it is happening when the status
block update has an address with higher (b16 to b31) bits
as 0xffff following a previous update that had lowest bits
as 0xffff.
To work around this bug in the BCM57766 hardware, set the
coherent dma mask from the current 64b to 31b. This will
ensure that upper bits of the status block DMA address are
always at most 0x7fff, thus avoiding the improper overflow
check described above. This work around is intended for only
status block and ring memories and has no effect on TX and
RX buffers as they do not require coherent memory.
Fixes:
|
||
|
Eric Dumazet
|
9b234a97b1 |
rtnetlink: fix rtnl_dump_ifinfo() error path
syzbot found that rtnl_dump_ifinfo() could return with a lock held [1]
Move code around so that rtnl_link_ops_put() and put_net()
can be called at the end of this function.
[1]
WARNING: lock held when returning to user space!
6.12.0-rc7-syzkaller-01681-g38f83a57aa8e #0 Not tainted
syz-executor399/5841 is leaving the kernel with locks still held!
1 lock held by syz-executor399/5841:
#0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline]
#0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rcu_read_lock include/linux/rcupdate.h:849 [inline]
#0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rtnl_link_ops_get+0x22/0x250 net/core/rtnetlink.c:555
Fixes:
|
||
|
David Wei
|
078f644cb8 |
selftests: fix nested double quotes in f-string
Replace nested double quotes in f-string with outer single quotes.
Fixes:
|
||
|
Oleksij Rempel
|
ae7370e61c |
net: usb: lan78xx: Fix memory leak on device unplug by freeing PHY device
Add calls to `phy_device_free` after `fixed_phy_unregister` to fix a
memory leak that occurs when the device is unplugged. This ensures
proper cleanup of pseudo fixed-link PHYs.
Fixes:
|
||
|
Oleksij Rempel
|
03819abbeb |
net: usb: lan78xx: Fix double free issue with interrupt buffer allocation
In lan78xx_probe(), the buffer `buf` was being freed twice: once
implicitly through `usb_free_urb(dev->urb_intr)` with the
`URB_FREE_BUFFER` flag and again explicitly by `kfree(buf)`. This caused
a double free issue.
To resolve this, reordered `kmalloc()` and `usb_alloc_urb()` calls to
simplify the initialization sequence and removed the redundant
`kfree(buf)`. Now, `buf` is allocated after `usb_alloc_urb()`, ensuring
it is correctly managed by `usb_fill_int_urb()` and freed by
`usb_free_urb()` as intended.
Fixes:
|
||
|
Heiner Kallweit
|
f26a29a038 |
net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled
This is a follow-up to |
||
|
Linus Torvalds
|
fcc79e1714 |
Networking changes for 6.13.
The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core
----
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL
knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read
access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code
--------------------------------------------
- Add small file operations for debugfs, to reduce the struct ops size.
- Refactoring and optimization for the implementation of page_frag API,
This is a preparatory work to consolidate the page_frag
implementation.
Netfilter
---------
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users
the option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent
CI improvements.
BPF
---
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols
---------
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after close,
the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per device
neigh lists.
Driver API
----------
- Introduce a unified interface to configure transmission H/W shaping,
and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling
-----------------
- forwarding: introduce deferred commands, to simplify
the cleanup phase
Drivers
-------
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- adds support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Adds representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- adds support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implements page pool support
- macsec:
- inherit lower device's features and TSO limits when offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- Add the dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- adds clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4
9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL
wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/
vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX
jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF
b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v
kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie
BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl
lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u
Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx
eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf
THcvVM+bupEZ
=GzPr
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
|
Linus Torvalds
|
6e95ef0258 |
bpf-next-bpf-next-6.13
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmc7hIQACgkQ6rmadz2v bTrcRA/+MsUOzJPnjokonHwk8X4KQM21gOua/sUcGArLVGF/JoW5/b1W8UBQ0y5+ +okYaRNGpwF0/2S8M5FAYpM7VSPLl1U7Rihr55I63D9kbAo0pDQwpn4afQFuZhaC l7MzkhBHS7XXx5/70APOzy3kz1GDYvz39jiWuAAhRqVejFO+fa4pDz4W+Ht7jYTQ jJOLn4vJna9fSfVf/U/bbdz5lL0lncIiEnRIEbF7EszbF2CA7sa+/KFENGM7ChEo UlxK2Xz5fpzgT6htZRjMr6jmupfg7gzdT4moOysQQcjkllvv6/4MD0s/GLShtG9H SmpaptpYCEGXLuApGzkSddwiT6iUMTqQr7zs6LPp0gPh+4Z0sSPNoBtBp2v0aVDl w0zhVhMfoF66rMG+IZY684CsMGg5h8UsOS46KLjSU0fW2HpGM7+zZLpXOaGkU3OH UV0womPT/C2kS2fpOn9F91O8qMjOZ4EXd+zuRtIRv9CeuVIpCT9R13lEYn+wfr6d aUci8wybha1UOAvkRiXiqWOPS+0Z/arrSbCSDMQF6DevLpQl0noVbTVssWXcRdUE 9Ve6J0yS29WxNWFtuuw4xP5NcG1AnRXVGh215TuVBX7xK9X/hnDDhfalltsjXfnd m1f64FxU2SGp2D7X8BX/6Aeyo6mITE6I3SNMUrcvk1Zid36zhy8= =TXGS -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Add BPF uprobe session support (Jiri Olsa) - Optimize uprobe performance (Andrii Nakryiko) - Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman) - Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao) - Prevent tailcall infinite loop caused by freplace (Leon Hwang) - Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi) - Introduce uptr support in the task local storage map (Martin KaFai Lau) - Stringify errno log messages in libbpf (Mykyta Yatsenko) - Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim) - Support BPF objects of either endianness in libbpf (Tony Ambardar) - Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai) - Introduce private stack for eligible BPF programs (Yonghong Song) - Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee) - Migrate test_sock to selftests/bpf test_progs (Jordan Rife) * tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits) libbpf: Change hash_combine parameters from long to unsigned long selftests/bpf: Fix build error with llvm 19 libbpf: Fix memory leak in bpf_program__attach_uprobe_multi bpf: use common instruction history across all states bpf: Add necessary migrate_disable to range_tree. bpf: Do not alloc arena on unsupported arches selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar selftests/bpf: Add a test for arena range tree algorithm bpf: Introduce range_tree data structure and use it in bpf arena samples/bpf: Remove unused variable in xdp2skb_meta_kern.c samples/bpf: Remove unused variables in tc_l2_redirect_kern.c bpftool: Cast variable `var` to long long bpf, x86: Propagate tailcall info only for subprogs bpf: Add kernel symbol for struct_ops trampoline bpf: Use function pointers count as struct_ops links count bpf: Remove unused member rcu from bpf_struct_ops_map selftests/bpf: Add struct_ops prog private stack tests bpf: Support private stack for struct_ops progs selftests/bpf: Add tracing prog private stack tests bpf, x86: Support private stack in jit ... |
||
|
Linus Torvalds
|
43fb83c17b |
ARM: soc updates for 6.13
The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+D8IACgkQYKtH/8kJ UicuyhAAqR3ps9ukDj4jIVrQthV76rMb6HfEF4gQ4qxIjS3uLp5wfqjxzeTI7bKY ntrzU9rAxgMdTuRDVqONCxjgBvtg7pG9kXlbndVhl11RdryEeO/fat99V2mPN6yS 0t9tR6lxVcz3VRI5qcyCRYLRicDXyeNklsMwEhfSolS1hWbTG0b/qtn8oa+vQ7bs U33rnvudrC36Wpy4HU6XIissq1RgleUrGqC6L2M3OLSEOlS8tM4RBA215VaDiWs9 fP8dYhdMVWmlif9pXi1L1M3uqEE3ahVDwzqg1bSc0LmX7nn4rXGGgu/YGiALuW4t KmsoTdcwaPxiQR+WVp3G6EEVxumFpMfX1dGiJ8ZagaI+pbXpjHej6B+xhWCRgjfp eTK0YeGjDduEOaaozGys5NdqoGFKPpl+npLD1rQGBtizCJO1x6zINAyuRgNHhyYa 640Bn77O7Rs+41qao2Nnr4mfbur73d3q+K1qOy4Tx3BL5fQGyz4PwUkT/wG4C++j esCBO2lA9opw9ZJzBSFWx6ez0GtEW+kVUf3dNDSXxYawVNBrIoV61xnG7Xcfqz0x RFSWTATWKLI34Px6fuorVxVw8xcGdQGgvbvIDbj2aiC8yXIbzeeSs8P9pEsakYD9 eej8H6eRy/EnOwBC8yJXCHoAA31PqaO+aLI5Vf0p0m0Ibtv/1zQ= =lQ3B -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "The SoC specific code updates for 6.13 are fairly minimal. One Broadcom SoC model gains automatic configuration for the debug uarg as we have on many other machines, the remaining changes are trivial cleanups" * tag 'soc-arm-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx: Switch to new sys-off handler API ARM: bcm: brcmstb: Drop custom init_irq callback ARM: bcm: Support BCMBCA debug UART ARM: zynq: Remove unused zynq_slcr_init() declaration ASoC: samsung: Remove obsoleted declaration for s3c64xx_ac97_setup_gpio ARM: samsung: Remove obsoleted declaration for s3c_hwmon_set_platdata |
||
|
Linus Torvalds
|
06e47dce8f |
soc: defconfig updates for 6.13
As usual, a few newly added device drivers get enabled in the arm32 multi_v7_defconfig and arm64 defconfig as well as a few of the SoC specific config files. The main visible change is the inclusion of (reduced) debug info by default in the 32-bit defconfig. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+EHIACgkQYKtH/8kJ Uid+ahAAnkQNh7m0+0l8O1DxLVjCVDb76f4r+dvYWBzBzOZoSvkLQzhKILGmgjFd tfLpWr7sfpgT7YPZxrwHK/muwpZ7rflTiC5P0qpgeo4VzO6VXv5r124uzYg0nEPo /t4hzCkAADKu80hNeDfaKFk9GbqvkOBKnO0PHpuTPGubiy3gU2cH6EvyqUYokvBM c0iD8fPtI5zb6oBju1oRFJtXIX6TJXXbQvjOIVmhz7cEsl/RAmPJLbbpgT/u8roR pCIHX1pqw1bURaUrBQiv33E266tF6kg9KYJUsGvXkykd0ifyXSOneYsxoadvO5x/ +2Xrfj243aMMz9EDXd2oczdpuoPyGkyUeaaNy61EvgMzaYpf3B9B7g7mqfuyhaCs VvXbWIc3jpA3P8dbyBOZhQQF8NzHMP8Dj8ymQhN17FiwkQTDV6CtHHO8srkKSoYU IGgtNJce0IvLEz87VU9C1F6DA5dscdTRGrlDErv+2ap5IeyCtE4gJaFNO+/64wUk QUP+gphCqxMXQuLmOIrKV9dsslnChRM9qlgNaJQMbvKvT25xRIpNc9/mmVPWoAs+ 1A3wdHn/ZOvaFBcWwNHpZaNu/3ybHGp60wkejWCiEzhaLabXBsEoKOap7+1cWGTK IlVUiaJoNIYBoLACTqx42AATgn0TsNXj4NVHq3poiodi1/7wunw= =tElw -----END PGP SIGNATURE----- Merge tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "As usual, a few newly added device drivers get enabled in the arm32 multi_v7_defconfig and arm64 defconfig as well as a few of the SoC specific config files. The main visible change is the inclusion of (reduced) debug info by default in the 32-bit defconfig" * tag 'soc-defconfig-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: imx_v6_v7_defconfig: Enable drivers for Kobo Clara 2E arm64: defconfig: Enable VBATTB clock and Renesas RTCA-3 arm64: defconfig: Enable PCF857X GPIO expander arm64: defconfig: Enable sc7280 clock controllers ARM: configs: at91: enable PAC1934 driver as module ARM: multi_v7_defconfig: Enable debugging symbols by default |
||
|
Linus Torvalds
|
14d0e1a09f |
soc: driver updates for 6.12
Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending the
set of supported features for additional SoCs in the QSEECOM, LLCC
and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip
sparx5 and amlogic reset drivers to support additional chips,
plus a few minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus,
and drivers/memory, including changing back the .remove_new callback
to .remove, as well as a few other updates for freescale (powerpc)
soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory
controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers
-----BEGIN PGP SIGNATURE-----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=xeCE
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Nothing particular important in the SoC driver updates, just the usual
improvements to for drivers/soc and a couple of subsystems that don't
fit anywhere else:
- The largest set of updates is for Qualcomm SoC drivers, extending
the set of supported features for additional SoCs in the QSEECOM,
LLCC and socinfo drivers.a
- The ti_sci firmware driver gains support for power managment
- The drivers/reset subsystem sees a rework of the microchip sparx5
and amlogic reset drivers to support additional chips, plus a few
minor updates on other platforms
- The SCMI firmware interface driver gains support for two protocol
extensions, allowing more flexible use of the shared memory area
and new DT binding properties for configurability.
- Mediatek SoC drivers gain support for power managment on the MT8188
SoC and a new driver for DVFS.
- The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot
and a few bugfixes
- The Hisilicon Kunpeng HCCS driver gains support for configuring
lanes through sysfs
Finally, there are cleanups and minor fixes for drivers/{soc, bus,
memory}, including changing back the .remove_new callback to .remove,
as well as a few other updates for freescale (powerpc) soc drivers,
NXP i.MX soc drivers, cznic turris platform driver, memory controller
drviers, TI OMAP SoC drivers, and Tegra firmware drivers"
* tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits)
soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure
soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting()
soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped()
platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names
platform: cznic: turris-omnia-mcu: Document the driver private data structure
firmware: turris-mox-rwtm: Document the driver private data structure
bus: Switch back to struct platform_driver::remove()
soc: qcom: ice: Remove the device_link field in qcom_ice
drm/msm/adreno: Setup SMMU aparture for per-process page table
firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404
soc: qcom: llcc: Flip the manual slice configuration condition
dt-bindings: firmware: qcom,scm: Document sm8750 SCM
firmware: qcom: uefisecapp: Allow X1E Devkit devices
misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent'
misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property'
soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform
dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC
...
|
||
|
Linus Torvalds
|
9c39d5ab45 |
soc: devicetree updates for 6.13
This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device driver
and platform code has already made it in. This is likely the last ARMv5
(!) platform to ever get added, updating the 20+ year old at91/sam9
platform wtih DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number of
A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older
Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related
to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet
chips, still using the older ARMv8.0 cores from RK3328/RK3399 but
with a newer process and other improvements from the RK35xx (otherwise
ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just
lower-cost versions of their normal counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly added
chips above, notably all the Apple phones and tablets. The other new
machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8
SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109,
RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100,
TI AM625 and Starfive JH7110.
As usual there are also many newlyad added features in existing boards
as well as cleanups and minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=Ha1w
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
|
||
|
Linus Torvalds
|
79caa6c88a |
asm-generic updates for 6.13
These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC
style inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys()
and phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions
-----BEGIN PGP SIGNATURE-----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=zEHk
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
||
|
Linus Torvalds
|
c66fbc6c3d |
OpenRISC updates for 6.13
A single fixup from me: - Fix bug with earlycon being broken due to removal of early_ioremap. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE2cRzVK74bBA6Je/xw7McLV5mJ+QFAmc8xS4ACgkQw7McLV5m J+T9IA/5ASXLsoterJXCo9ds34n9oIoEiur8UcOY0LELCm5M9HP0z62at0IZccX9 Tc+DFl6rCJBwZWn7JmYo8qnkO+hTkAoRDFx+I1WMlzjczOLHdwZ3E26u4/cWrhVd j4eISjk5KIFO2DExIdEXgKWetagcfjgyo44/SU+7PLApNPnAeE6bBu5VYypfy+sd BWPZs+FoFBjszdRHjo1mowxbS1Wa6znhWbELyFAY/5hFWIt+91YHS1rpxDoDPnE+ GUYMIFTJLdXlc0eyGfsjcvcHX08NankY8Betg/6e2jENqO+fQHb7KuYL+cxoTDAv HlIfzJQ6YRnfxB8XSLJvAT/bmqoYQAuVydvoFN/45ogzu1OwizM6e6mGw5ErgYkO kRPXa5IgCbORc3v8Dxd+IZNJ4FzBXQ7BDz0V92FYjtJ3OsQKsVHX/t2dGhd4wmGS ItzmxRp55ufqYkb2Waszvq+dBvuW6gJHHB9k9h0mZKhVEm1V2TisIIpdnE3FF/QA p81cPdvHxsp4mf5w30kIaFMHgKM+6jRUEl6IDTEmOtim02Zu75y1JQE8mFZ1yFZ0 l4KPnhU2hYzXG/eqinzRuyRap2wgIGPAXC+mL4LekL74TqmaEGrTeBOq1z+DnMwz u7dQwLJsbomjJUc17MJcKH3zZ1l7xFZxIEbaFrGaimlRMHHQS7Q= =3/S+ -----END PGP SIGNATURE----- Merge tag 'for-linus' of https://github.com/openrisc/linux Pull OpenRISC update from Stafford Horne: "A single fixup from me: Fix bug with earlycon being broken due to removal of early_ioremap" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Implement fixmap to fix earlycon |
||
|
Linus Torvalds
|
f103749785 |
Microblaze patches for 6.13-rc1
- Export xmb_manager functions - Remove empty #ifndef __ASSEMBLY__ statement - Use str_yes_no() helper in show_cpuinfo() -----BEGIN PGP SIGNATURE----- iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZzw3uQAKCRDKSWXLKUoM IapyAJ0TsUChBtA7+FFPYXwfQ2nrbhGytQCeNegQkFHSL/Ray6Tsk4Q1zejixlU= =2mED -----END PGP SIGNATURE----- Merge tag 'microblaze-v6.13' of git://git.monstr.eu/linux-2.6-microblaze Pull microblaze updates from Michal Simek: - Export xmb_manager functions - Remove empty #ifndef __ASSEMBLY__ statement - Use str_yes_no() helper in show_cpuinfo() * tag 'microblaze-v6.13' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: mb: Use str_yes_no() helper in show_cpuinfo() microblaze: Remove empty #ifndef __ASSEMBLY__ statement microblaze: Export xmb_manager functions |
||
|
Linus Torvalds
|
7e7f65647e |
ipe/stable-6.13 PR 20241119
-----BEGIN PGP SIGNATURE----- iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCZz0KKhEcd3VmYW5Aa2Vy bmVsLm9yZwAKCRDyomI6a/yO7RD5AQDY0KVqHmtmLRaIAXTUX/YSZYfw6pFVIFzv b3YkugWwAAEA/iBdSQCFBK9GnFAhVmKL99T5opHu075vfj2CGdA2Yg0= =EFOk -----END PGP SIGNATURE----- Merge tag 'ipe-pr-20241119' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe Pull IPE update from Fan Wu: "One commit from Colin Ian King, which removes unnecessary error handling code in the IPE boot policy generation helper program" * tag 'ipe-pr-20241119' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe: scripts: ipe: polgen: remove redundant close and error exit path |
||
|
Linus Torvalds
|
df66aeadd8 |
seccomp update for v6.13-rc1
- Provide stub for !HAVE_ARCH_SECCOMP_FILTER (Linus Walleij) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZzzEewAKCRA2KwveOeQk uwp6AP98Sv73J57WD09zKPFS7xHqTyWgfemD9M8RPSMIgkudBgD9F3tNRqQ2DD6o IX6Zv18AObJSKAZ95No65GHVRHtomAY= =T7J1 -----END PGP SIGNATURE----- Merge tag 'seccomp-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp update from Kees Cook: - Provide stub for !HAVE_ARCH_SECCOMP_FILTER (Linus Walleij) This will make it easier to port arm32 to the generic entry code. * tag 'seccomp-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Stub for !HAVE_ARCH_SECCOMP_FILTER |
||
|
Linus Torvalds
|
18a411cc5d |
EFI updates for v6.13
- Align handling of the compiled-in command line with the core kernel
- Measure the initrd into the TPM also when it was loaded via the EFI
file I/O protocols
- Clean up TPM event log handling
- Sanity check the EFI memory attributes table, and apply it after kexec
too
- Assorted other fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZzxU/QAKCRAwbglWLn0t
XIBoAQDAHoTX2/CxsCKHXaJE8C19kN451lgLRtZea5kFCVhq+QD/YDVxfif4OvUM
q2Wo5BwmqyUk56qHAW14DWZb2Pl1sgU=
=YFm/
-----END PGP SIGNATURE-----
Merge tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Just some cleanups and bug fixes this time around:
- Align handling of the compiled-in command line with the core kernel
- Measure the initrd into the TPM also when it was loaded via the EFI
file I/O protocols
- Clean up TPM event log handling
- Sanity check the EFI memory attributes table, and apply it after
kexec too
- Assorted other fixes"
* tag 'efi-next-for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Fix memory leak in efivar_ssdt_load
efi/libstub: Take command line overrides into account for loaded files
efi/libstub: Fix command line fallback handling when loading files
efi/libstub: Parse builtin command line after bootloader provided one
x86/efi: Apply EFI Memory Attributes after kexec
x86/efi: Drop support for the EFI_PROPERTIES_TABLE
efi/memattr: Ignore table if the size is clearly bogus
efi/zboot: Fix outdated comment about using LoadImage/StartImage
efi/libstub: Free correct pointer on failure
libstub,tpm: do not ignore failure case when reading final event log
tpm: fix unsigned/signed mismatch errors related to __calc_tpm2_event_size
tpm: do not ignore memblock_reserve return value
tpm: fix signed/unsigned bug when checking event logs
efi/libstub: measure initrd to PCR9 independent of source
efi/libstub: remove unnecessary cmd_line_len from efi_convert_cmdline()
efi/libstub: fix efi_parse_options() ignoring the default command line
|
||
|
Linus Torvalds
|
fcb3ad4366 |
platform-drivers-x86 for v6.13-1
Highlights: - alienware-wmi: WMAX thermal interface support - amd/hsmp: Split ACPI and platform device based drivers - amd/x3d_vcache: X3D frequency/cache mode switching support - asus-wmi: Thermal policy fixes - intel/pmt: Disable C1 auto-demotion in suspend to allow entering the deepest C-states - intel-hid: Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - intel_scu_ipc: Replace "workaround" with 32-bit IO - panasonic-laptop: Correct *_show() function error handling - p2sb: Gemini Lake P2SB devfn correction - think-lmi: Admin/System certificate authentication support - wmi: Disable WMI devices for shutdown, refactoring continues - x86-android-tablets: Vexia EDU ATLA 10 tablet support - platform/surface: Surface Pro 9 5G (Arm/QCOM) support - Miscellaneous cleanups / refactoring / improvements Expected conflicts: - hsmp driver split into two vs constifying bin_attribute [1] [1] https://lore.kernel.org/all/20241107212645.41252436@canb.auug.org.au/ The following is an automated shortlog grouped by driver: alienware-wmi: - added force module parameters - added platform profile support - Adds support to Alienware x17 R2 - alienware_wmax_command() is now input size agnostic - create_thermal_profile() no longer brute-forces IDs - extends the list of supported models - fixed indentation and clean up - Fix spelling mistake "requieres" -> "requires" - order alienware_quirks[] alphabetically - WMAX interface documentation amd: amd_3d_vcache: - Add AMD 3D V-Cache optimizer driver - Add sysfs ABI documentation amd/hsmp: - Add new error code and error logs - Change generic plat_dev name to hsmp_pdev - Change the error type - Convert amd_hsmp_rdwr() to a function pointer - Create hsmp/ directory - Create separate ACPI, plat and common drivers - Create wrapper function init_acpi() - Make hsmp_pdev static instead of global - mark hsmp_msg_desc_table[] as maybe_unused - Move ACPI code to acpi.c - Move platform device specific code to plat.c - Move structure and macros to header file - Use dev_groups in the driver structure - Use name space while exporting module symbols amd/pmf: - Switch to platform_get_resource() and devm_ioremap_resource() - Use dev_err_probe() to simplify error handling asus-laptop: - prefer strscpy() over strcpy() asus-wmi: - Fix inconsistent use of thermal policies - Use platform_profile_cycle() classmate-laptop: - Replace snprintf in show functions with sysfs_emit compal-laptop: - use sysfs_emit() instead of sprintf() dell-dcdbase: - Replace snprintf in show functions with sysfs_emit Documentation: alienware-wmi: - Describe THERMAL_INFORMATION operation 0x02 eeepc-laptop: - use sysfs_emit() instead of sprintf() hp: hp-bioscfg: - remove redundant if statement intel: - Add 'intel' prefix to the modules automatically intel-hid: - fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 intel/pmc: - Disable C1 auto-demotion during suspend - Refactor platform resume functions to use cnl_resume() intel/pmt: - allow user offset for PMT callbacks - Correct the typo 'ACCCESS_LOCAL' intel_scu_ipc: - Convert to check for errors first - Don't use "proxy" headers - Replace workaround by 32-bit IO - Save a copy of the entire struct intel_scu_ipc_data - Simplify code with cleanup helpers - Unify the flow in pwr_reg_rdwr() intel/vsec: - Remove a useless mutex MAINTAINERS: - adjust file entry in INTEL TPMI DRIVER - Change AMD PMF driver status to "Supported" - Update ISHTP ECLITE maintainer entry p2sb: - Cache correct PCI bar for P2SB on Gemini Lake panasonic-laptop: - Return errno correctly in show callback surface: aggregator_registry: - Add Surface Pro 9 5G Switch back to struct platform_driver:: - remove() think-lmi: - Add certificate as mechanism - Allow empty admin password - improve check if BIOS account security enabled - Multi-certificate support wmi: - Implement proper shutdown handling - Introduce to_wmi_driver() - Remove wmi_block_list - Replace dev_to_wdev() with to_wmi_device() x86: acer-wmi: - remove unused macros x86-android-tablets: - Add get_i2c_adap_by_handle() helper - Add support for getting i2c_adapter by PCI parent devname() - Add support for Vexia EDU ATLA 10 tablet -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZz3IswAKCRBZrE9hU+XO McdKAQCY9gIuqtHpYK0QIQYMoZOWhpiCzfZ96DDHqt4Wknh6NgD/YY6eESyDokyB 4BkujKwqo3cdGNPjIBy41jnNjekNsw8= =QEd2 -----END PGP SIGNATURE----- Merge tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - alienware WMAX thermal interface support - Split ACPI and platform device based amd/hsmp drivers - AMD X3D frequency/cache mode switching support - asus thermal policy fixes - Disable C1 auto-demotion in suspend to allow entering the deepest C-states - Fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 - Replace intel_scu_ipc "workaround" with 32-bit IO - Correct *_show() function error handling in panasonic-laptop - Gemini Lake P2SB devfn correction - think-lmi Admin/System certificate authentication support - Disable WMI devices for shutdown, refactoring continues - Vexia EDU ATLA 10 tablet support - Surface Pro 9 5G (Arm/QCOM) support - Misc cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (69 commits) platform/x86: p2sb: Cache correct PCI bar for P2SB on Gemini Lake platform/x86: panasonic-laptop: Return errno correctly in show callback Documentation: alienware-wmi: Describe THERMAL_INFORMATION operation 0x02 alienware-wmi: create_thermal_profile() no longer brute-forces IDs alienware-wmi: Adds support to Alienware x17 R2 alienware-wmi: extends the list of supported models alienware-wmi: order alienware_quirks[] alphabetically platform/x86/intel/pmt: allow user offset for PMT callbacks platform/x86/amd/hsmp: Change the error type platform/x86/amd/hsmp: Add new error code and error logs platform/x86/amd: amd_3d_vcache: Add sysfs ABI documentation platform/x86/amd: amd_3d_vcache: Add AMD 3D V-Cache optimizer driver intel-hid: fix volume buttons on Thinkpad X12 Detachable Tablet Gen 1 platform/x86/amd/hsmp: mark hsmp_msg_desc_table[] as maybe_unused platform/x86: asus-wmi: Use platform_profile_cycle() platform/x86: asus-wmi: Fix inconsistent use of thermal policies platform/x86: hp: hp-bioscfg: remove redundant if statement MAINTAINERS: Update ISHTP ECLITE maintainer entry platform/x86: x86-android-tablets: Add support for Vexia EDU ATLA 10 tablet platform/x86: x86-android-tablets: Add support for getting i2c_adapter by PCI parent devname() ... |
||
|
Linus Torvalds
|
70e8ef2d67 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8TpAACgkQCF8+vY7k 4RUQug//fmDVv94YOgjjfpHYfJU6imzlcTNcHpQnVFbDNSshEOh5bMwEcvhP69pc 1NxpDuzxAVUgANR09VRG58jevpIm0AROMeG4BV7Ah5BGO8a9YzD/ngZ0QxMZJ3gr 4q3de6JhEGFvNzidLQMaqaQEcmIl7dFd3A7f/+VpPLBZfbhL67cseItRZ0Bwmxh5 yu7ENYFqESuvo7maNPrzRaFz0Z34z0pTvNViEK4ZHnkVYDtTurD4EoAWxUaoQIVH E802RKWdg4sPiTUeeWw0ONeSZR6pw/QOqalqalKKxVrxWPtrhXUxnrdjwn97VM5u H7X5Y4Dkgp86jCjs7aTHfrsAFrlT71XRmbjROwRmwccLXYQeJj0DsHZwYFe4dXx4 MbNo80hhr8/ADRKkioAwe+omNay998cVWvlinMRHqUfdLQcggW4txb0VGNTE56nL BMZ0A05LWuyWqbbejhGmPlj676w5NdK2MCNUtb6ei3TIE1LDeN05t6cfm+1zkfQU 1I6AdkBfPe7vfQtQtFUD/iQIkG3bl07PwGsCfOnzAkLz95Ap7lMyHG51UwllPkUX WGXHQNBVhzoftw5SNPUNAp1GTjPhNFqA1ZaSmBWz8EZazrq/uFMZk3wCAuO1yqI2 Matp/j+KKegEUlkb4bsVoAM/nm8yaWlmxVy5VsmFovKAnbJhy28= =BFNW -----END PGP SIGNATURE----- Merge tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: - uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format * tag 'media/v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: uvcvideo: Skip parsing frames of type UVC_VS_UNDEFINED in uvc_parse_format |
||
|
Linus Torvalds
|
9f5a6a1fe6 |
media updates for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8Q80ACgkQCF8+vY7k 4RX+3g//dMBSmu3uC9OiXyfw3aB8w62RMeieRxSVPMdkiacUm1J8HyzHnXPXIUn3 tfBT9E/YbeFZ+PlrOXRDUi1i8jmN47VuwRe01rxxF/FdlYknC2eGH3Ug9DW90VBh wmZ1kSjyjizwDkKAm+Jc2xynTaX+iInJ4Kzp9RStDZPuaqj2Qzd1qVRk2FJwAYRh 5dTpi0W1PexjxQXDIcnHi/tPapGLSP5PnrunrAJR0tYfp60wrKMaxTO36yJzbnDP MxkF8A+9dWtePRqoPWxPIvnOVu/+Twc730xkQp62qPvwEM2HZRtU7cgQFlWos6p/ ijK2i6sAQslMhQ9oIyKlO7HpXX60rjE3XtdzEtGxBq6DyIqx1riN+OqJB2C4Cdsr 2qUET8aTIisPURw1ecNAbthvLt8tljBe08/eX0GYaWFjALJx3Pds23ahH8hw295N o3SY5NaGmO9Tg6HzYLSwfBmxgGpWDuRic6PDCVKok5mS5D1+uV/tu8fQFiNiFNVe Okufjvo7HtZ3+rWR90b/Udpz/lBB/dceppnUX2iKevrG190VHxEwJ2pQKkfdH9ha LUZQajikiv5rbGxKIGrjrCnjrJ24TC2vCSPhkgOb1r91LUY4RUV61c3hZbH73rzQ 2Ykwvmy+gpE4GEYiJRfSR6KlXdBruMa5FToLUHEK0uBMSlG5k7Q= =25BS -----END PGP SIGNATURE----- Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of the old omap4iss media driver - mantis: remove orphan mantis_core.h - add support for Raspberypi CFE - uvc driver got a co-maintainer - main media tree moved to git://linuxtv.org/media.git - lots of driver cleanups, updates and fixes * tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits) docs: media: update location of the media patches MAINTAINERS: update location of media main tree media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer media: platform: samsung: s5p-jpeg: Remove deadcode media: qcom: camss: Add MSM8953 resources media: dt-bindings: Add qcom,msm8953-camss media: qcom: camss: implement pm domain ops for VFE v4.1 media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available media: adv7180: Also check for "adi,force-bt656-4" media: dt-bindings: adv7180: Document 'adi,force-bt656-4' media: mgb4: Fix inconsistent input/output alignment in loopback mode media: replace obsolete hans.verkuil@cisco.com alias Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls media: atomisp: Add check for rgby_data memory allocation failure media: atomisp: remove redundant re-checking of err media: atomisp: Fix spelling errors reported by codespell media: atomisp: Remove License information boilerplate media: atomisp: Fix typos in comment media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h ... |
||
|
Linus Torvalds
|
b57807cbbf |
hid-for-linus-2024111801
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZzusZKZi849r7WBJAQKH9Q/+Llff1j+bP/W2E987vDy8zfFrMHR1nTrB nJb1mXKCp1AG+HcrrJh+9nVZXaXJtoduJ83wufxZoeK2jT06ij+TXPRW3JJcYooO C1UK8CI6fQBzTzKtDLRdBxv8MVTyuFI8KkBasDQQEJafRSN4rW007zA5B+EftcXe N9eb1+BiSbIMDtFdLw6N7kvDwfUj9iWO34cmH7ahv1Y0mj94OCRylN3p3fsbvkjG N5VP0Dm47X5H3OhS85HuVVskpFeMWBnNnLBFCxSoSELhl9pbXcriNQtUrk+uyHfL ObGrUajJlw6rrlCwugonJ5a6HmpWcfZBaXlvkP1b/q4oAePQ+Zuv0RStvPeqiM07 3m4XJf8kcRhMnUVYKo4nv9kVedK+EKu/HBZQsgTdDlTKV3BXpktt7PRD/WUKZ7yG kr/JWOlJho2Lzg7ky/47aJOgRfaLJzhPx1vSoSHrglB4L+4b+J0wZassc/iTkA0Q 9JS1Jci41oAcMzDW4KMkE2GIyXeTeSUTJH54DAm4+SXwkR1Sgn0K+ogceRc86ooA ZQu8touqvHBrVekC6jaFAA92IekLO5UFmiUcbQ1MHFdjx5Y9nruwKd2DulLV9cb9 XdHZMzT2RSdL1DLh5LlXRhLOSplhg0sUj9/XkCHIMX2GXa+ZNgFEA9VxDYBnB+dJ XZsGAHtgWQg= =J6g1 -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - improvement in the way hid-bpf coexists with specific drivers (others than hid-generic) that are already bound to devices (Benjamin Tissoires) - removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang) - assorted cleanups and small code fixes to HID core (Dmitry Torokhov, Yan Zhen, Nathan Chancellor, Andy Shevchenko) - support for Corsair Void headset family (Stuart Hayhurst) - Support for Goodix GT7986U SPI (Charles Wang) - initial vendor-specific driver for Kysona, currently adding support for Kysona M600 (Lode Willems) - other assorted code cleanups and small bugfixes all over the place * tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits) HID: multitouch: make mt_set_mode() less cryptic HID: hid-goodix-spi: Add OF supports dt-bindings: input: Goodix GT7986U SPI HID Touchscreen HID: hyperv: streamline driver probe to avoid devres issues HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support HID: rmi: Add select RMI4_F3A in Kconfig HID: wacom: Interpret tilt data from Intuos Pro BT as signed values HID: steelseries: Add capacity_level mapping HID: steelseries: Fix battery requests stopping after some time HID: hid-goodix: Fix HID get/set feature operation overwritten problem HID: hid-goodix: Return 0 when receiving an empty HID feature package HID: bpf: drop use of Logical|Physical|UsageRange HID: bpf: Fix Rapoo M50 Plus Silent side buttons HID: bpf: Fix NKRO on Mistel MD770 HID: replace BUG_ON() with WARN_ON() HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set HID: Kysona: add basic online status HID: Kysona: check battery status every 5s using a workqueue HID: Kysona: Add basic battery reporting for Kysona M600 HID: Add IDs for Kysona ... |
||
|
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
||
|
Linus Torvalds
|
80db457e8d |
auxdisplay for v6.13-1
* Move Holtek 16k33 driver to use agnostic i2c_get_match_data() * Miscellaneuous cleanups The following is an automated git shortlog grouped by driver: cfag12864b: - Remove unused functions ht16k33: - Make use of i2c_get_match_data() - Drop explicit initialization of struct i2c_device_id::driver_data to 0 lcd2s: - Drop explicit initialization of struct i2c_device_id::driver_data to 0 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAmcrVb0ACgkQmT3/83c5 Sy2FQw/8D/237N73INQrDYBT6CF6vR6qoI7yms3OsOQV6f0WydHbG5dUqE+tXZ2g Axh1S4CKtJaO8PQjS+Tb1GFzzM/N9uIyFG8zQN520wU6CzW7ipvmqs3l2yREQzVz 4/ZrwVhUkDl0//x/Cd0PNGKhiIomszQVjc4TlHzJZXQtdx3Mkh/Xg8yo5QzYQRd5 JjcOW0s8GJd39+dT417oq/4LZE0mYvsEJQeU7RWf7EvkUy6GmWUiIoNOKBVkb6Sz U/PGdyux9sO9+6hH4ziJiaQRi+O9ZbLlNlL8VV++T35G+p1Y6lZGXTRduVQ1ElLz 98m1nrHNCKb6uvmtjDiA1Xlojf06cmpg+v2J+eD4aultIrHRiGgS4ZdRMJj5MoC7 +jyZBYPwNwDmOQAIPWqphVquXRkznvEqfKmfxtohDfsx0QBhdrEIJVtdIpUT1fqk 9a3vok/7TMJM65UE2Qo8omJoztjCf1YAPA5cHFpcr/i8Hl6GsHJP3ojTA8ryVDcQ MkxPI8AkEfOWqqa/amUN+mYh6sS8+rSKcVcKm/r1uV/ncH7CUAaxeWDSc8KT5IMX x/3n4+l8l+ZohAr17OVm+9rBl0KFtH1U3gXC+lkDuuvNmd7NbwBrUJWnop+zVwNb EEUqXU7y8Mljje3GCiUOn3M6FDzpVa4uVp9F7Ty/4Gnerjxj4Ns= =Z6SY -----END PGP SIGNATURE----- Merge tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay Pull auxdisplay update from Andy Shevchenko: - Move Holtek 16k33 driver to use agnostic i2c_get_match_data() - Miscellaneuous cleanups * tag 'auxdisplay-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: auxdisplay: Remove unused functions auxdisplay: ht16k33: Make use of i2c_get_match_data() auxdisplay: Drop explicit initialization of struct i2c_device_id::driver_data to 0 |
||
|
Linus Torvalds
|
38556294b8 |
MMC core:
- Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7NnoXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnQPRAAkxvhptCjKuLBIMBrNZglQElp Ncm8fXDiS72CvLwC3bp7rxognCKLVQGWc8GrxcBOxMSB5eiDyPe6xcLLQ2Zrm4l/ msnfP29VDtmWw3K1iC2Uzo0vlMWYyRFX0OK3fz3d6WL0dE6TXy5adsdy9BmdxGXk vpDgiTWkSZcoT/upuXs8/0N87eSgLUFzZ8uPNP+aHtF4AVWIwhJ3Y1MKqdfGrUlw 7b9bFeh6DelA+jGDxsPsqSwDBh2CDDP3YaPFYf4yyaeTRJmp6DMSEqjDifBa+hDn wkwNGj9bN05HeRN3TfsF/Z22LcaPcbWlLYh8p06h+Ws+R/2KxAXdV3oWnKNLQB9R 5WIdgb7HBD2OS2RymPeHygPPGt6zgxk55UfTBwchg7fHyugXvpcT/JDS2mbPQT4w Ty4s217wBn6Kkt4/8fWhHyG/rKBTq02Etmdery4AAM49M2iPvf+edio53FLnskrq xB8kYn5UZkk9dQ+GseC4+tXe8A1G/sxh/E2aJ/b15Mc9Mh1/BqL3g2532A+z6x5Q 8o4nyztCJhKWtfYxo1slnWzF+Axrz6ZXgVYh5MecMk9EjKVcX6oN+FGpiK/cg3dQ 7FFyzf+YGwdnOhuHhdBG0NTbvKvIRA0rMQ3xvhsfXqCI206j7FZNpWOxXYn36Lgt oZlprarw04AoECCg5Ko= =LGdl -----END PGP SIGNATURE----- Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates" * tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits) mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting mmc: mtk-sd: Fix error handle of probe function mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask mmc: sdhci-esdhc-imx: Implement emmc hardware reset mmc: core: Correct type in variable assignment for UHS-II mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument mmc: sdhci-uhs2: Remove unnecessary variables mmc: sdhci-uhs2: Correct incorrect type in argument mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible mmc: sdhci-uhs2: Remove unnecessary NULL check mmc: core: Fix error paths for UHS-II card init and re-init mmc: core: Add error handling of sd_uhs2_power_up() mmc: core: Simplify sd_uhs2_power_up() mmc: bcm2835: Introduce proper clock handling mmc: bcm2835: Fix type of current clock speed dt-bindings: mmc: Add sdhci compatible for QCS615 mmc: core: Use GFP_NOIO in ACMD22 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible ... |
||
|
Linus Torvalds
|
75f2b37dd0 |
pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to *_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()
-----BEGIN PGP SIGNATURE-----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=SpyF
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Set the required dev for a required OPP during genpd attach
- Add support for required OPPs to dev_pm_domain_attach_list()
pmdomain providers:
- ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains
- mediatek: Add support for MT6735 PM domains
- mediatek: Use OF-specific regulator API to get power domain supply
- qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds
pmdomain consumers:
- Convert a couple of consumer drivers to
*_pm_domain_attach|detach_list()
opp core:
- Rework and cleanup some code that manages required OPPs
- Remove *_opp_attach|detach_genpd()"
* tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750
dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains
pmdomain: imx: Use of_property_present() for non-boolean properties
pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe()
pmdomain: ti-sci: Use scope based of_node_put() to simplify code.
pmdomain: ti-sci: Add missing of_node_put() for args.np
pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains
pmdomain: mediatek: Add support for MT6735
pmdomain: qcom: rpmhpd: add support for SAR2130P
dt-bindings: power: Add binding for MediaTek MT6735 power controller
dt-bindings: power: rpmpd: Add SAR2130P compatible
OPP: Drop redundant *_opp_attach|detach_genpd()
cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list()
media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain
drm/tegra: gr3d: Convert into devm_pm_domain_attach_list()
OPP: Drop redundant code in _link_required_opps()
pmdomain: core: Set the required dev for a required OPP during genpd attach
pmdomain: core: Manage the default required OPP from a separate function
PM: domains: Support required OPPs in dev_pm_domain_attach_list()
OPP: Rework _set_required_devs() to manage a single device per call
...
|
||
|
Linus Torvalds
|
0cea110255 |
power sequencing updates for v6.13-rc1
- extend support for the wcn6855 model in the pwrseq-qcom-wcn driver - make this driver depend on CONFIG_OF=y as it uses some very OF-specific interfaces and depends on phandle parsing -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmc7Ou4ACgkQEacuoBRx 13JohhAA1qSsMSAiMzjx1v46QHxsKvQQatRGjUuqsAIKPNJ73IeZ9h7KmlXJ4Uti GS78mL+kS0Xo3YiHDAMBErk+K3FARbjljcLAKeMb86Ait3gc56nw9/X+osdAvM3x q5gKpT8Gm1zKTaN85beZanmw5/uKc7cBI1+hx2PdPH8tR2e9g8KP2Z5dMG31sGx3 GsyEal/WXT2NppWipXQOgRAQgMPW5yCtXkR4uIprRtrWl4h7rS4mNmC7genb1kKV xDzztqR4MjwKNL+TnfMxPlPJsJSecWMETpVjZEhguACeiRo9oJiBpLqbdOAKEj4+ LjotJSohFEb97W2F/k3ZlyE9gWKyeTq6yhcsUOFVXvLFLYQjSK0z/59yy34zCy3d GD73cuG3O0g8xcU415Nx8Nv7srIIoIWDRKpbhM4HfO8wQXCw4RgHD9jarj9kWU6/ 6phUjgQ+YopVACw/kTG7I0tzFQEXN0IeOVyRAaac4LIrgNktyRbWJi0D/ZdNcg0p fVXPEq0ipsYvMuV+Qj1nrRZKJHQl4DZ4+QjY2aNIB/rvFkX8o4rXah6m9jWYlHtm Y53U8TL0IwYP+Nt+cW4+tX75FnvHuw4dDpqWnUEY/rN9+Cgj7NFvBWFZwdXYytoa AF552LczvcQFyNfPl0jWo/4/Khqhy1hWOb0OWci0Aq8VDEPe6Ps= =IOPC -----END PGP SIGNATURE----- Merge tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull power sequencing updates from Bartosz Golaszewski: - extend support for the wcn6855 model in the pwrseq-qcom-wcn driver - make this driver depend on CONFIG_OF=y as it uses some very OF-specific interfaces and depends on phandle parsing * tag 'pwrseq-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: qcom-wcn: improve support for wcn6855 power: sequencing: make the QCom PMU pwrseq driver depend on CONFIG_OF |
||
|
Linus Torvalds
|
131561f2ca |
gpio updates for v6.13-rc1
GPIOLIB core:
- use the new mem_is_zero() instead of memchr_inv(s, 0, n)
- don't store debounce period twice needlessly
- clean-up debugfs handling
- remove leftover comments referring to no longer used spinlocks
- unduplicate some operations like SRCU locks and initializing GPIO descriptors
- constify the sysfs class struct
- use lock guards in GPIO sysfs code
- update GPIO uAPI internal flags all at once atomically for consistency with
other places
- modify the behavior of the sysfs interface by no longer exporting lines that
are named inside the driver code or board files with the sysfs links bearing
the line names as this has for many years been largely unused due to the
prevalence of DT, ACPI and firmware nodes over board files and made the API
inconsistent
- for GPIO interrupt providers: free irqs that are still requested by users
when removing the chip
GPIO uAPI:
- notify user-space about changes to GPIO lines' state (requested, released,
reconfigured) triggered from the kernel as well (until now we'd only do
this for changes triggered from user-space)
- to that end: modify the internal workings of the notification mechanism by
switching to an atomic notifier which allows us to send events from atomic
context
- also to that end store the debounce period in the GPIO descriptor struct
and not in the character device context struct
- while at it, also cover the corner-case of users introducing changes over
sysfs while others watch them via the character device
- don't report GPIO lines requested as interrupts as "used" to user-space as it
can still request them as GPIOs
New drivers:
- add a driver for the GPIO functionality of the MFD Congatec Board Controller
- add a driver for the PolarFire GPIO controller
- add a driver supporting the GPIOs on FTDI FT2232H
Driver improvements:
- use generic device property accessors instead of OF-specific ones across
many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu)
- use devres helpers to simplify error paths and either shrink or entirely
remove the driver's remove() callback (grgpio, amdpt, menz127, max730x,
ftgpio010, 74x164, ljca)
- use helper variables to store the address of pdev->dev and avoid some
line-breaks
- use device_for_each_child_node_scoped() to avoid having to put the fwnode
on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
- use a scoped bitmap to simplify the code and drop goto labels in
gpio-aggregator
- drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx)
- add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb
- clean-up ACPI handling and some other bits in gpio-xgene-sb
- replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
- allow to build davinci and mvebu drivers with COMPILE_TEST=y
- remove dead code in gpio-mb86s7x
- switch back to using platform_driver::remove() (after the conversion to
remove_new()) across the GPIO drivers
- remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this
deprecated symbol
- convert the gpio-altera driver to no longer pull in the deprecated
legacy-of-mm-gpiochip.h header
- use of_property_present() instead of of_property_read_bool() in gpiolib-of
and gpio-rockchip
- allow to build the tegra186 driver on Tegra234 platforms in Kconfig
Late fixes:
- add a missing return value check after devm_kasprintf() to gpio-grgpio
DT bindings:
- document the ngpios property of gpio-mmio
- add support for a new aspeed model
- fix the example for st,nomadik-gpio
Other:
- kernel doc and comments tweaks
- fix typos in TODO
- reorder headers alphabetically in some drivers
- fix incorrect format specifiers in gpio tools
-----BEGIN PGP SIGNATURE-----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=ON7q
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Three new drivers, support for some new models in existing ones and
lots of various tweaks and improvements across the board (switching to
using recommended APIs, code shrink and simplification, etc.).
Also a new feature in the character device uAPI where we now notify
the user-space about changes triggered by in-kernel users as well, not
only when they were done by other user-space agents.
Summary:
GPIOLIB core:
- use the new mem_is_zero() instead of memchr_inv(s, 0, n)
- don't store debounce period twice needlessly
- clean-up debugfs handling
- remove leftover comments referring to no longer used spinlocks
- unduplicate some operations like SRCU locks and initializing GPIO
descriptors
- constify the sysfs class struct
- use lock guards in GPIO sysfs code
- update GPIO uAPI internal flags all at once atomically for
consistency with other places
- modify the behavior of the sysfs interface by no longer exporting
lines that are named inside the driver code or board files with the
sysfs links bearing the line names as this has for many years been
largely unused due to the prevalence of DT, ACPI and firmware nodes
over board files and made the API inconsistent
- for GPIO interrupt providers: free irqs that are still requested by
users when removing the chip
GPIO uAPI:
- notify user-space about changes to GPIO lines' state (requested,
released, reconfigured) triggered from the kernel as well (until
now we'd only do this for changes triggered from user-space)
- to that end: modify the internal workings of the notification
mechanism by switching to an atomic notifier which allows us to
send events from atomic context
- also to that end store the debounce period in the GPIO descriptor
struct and not in the character device context struct
- while at it, also cover the corner-case of users introducing
changes over sysfs while others watch them via the character device
- don't report GPIO lines requested as interrupts as "used" to
user-space as it can still request them as GPIOs
New drivers:
- GPIO part of the MFD Congatec Board Controller
- PolarFire GPIO controller
- GPIOs on FTDI FT2232H
Driver improvements:
- use generic device property accessors instead of OF-specific ones
across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci,
ts4900, xilinx, mvebu)
- use devres helpers to simplify error paths and either shrink or
entirely remove the driver's remove() callback (grgpio, amdpt,
menz127, max730x, ftgpio010, 74x164, ljca)
- use helper variables to store the address of pdev->dev and avoid
some line-breaks
- use device_for_each_child_node_scoped() to avoid having to put the
fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
- use a scoped bitmap to simplify the code and drop goto labels in
gpio-aggregator
- drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby,
xilinx)
- add support for new models to gpio-aspeed, gpio-rockchip and
gpio-dwapb
- clean-up ACPI handling and some other bits in gpio-xgene-sb
- replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
- allow to build davinci and mvebu drivers with COMPILE_TEST=y
- remove dead code in gpio-mb86s7x
- switch back to using platform_driver::remove() (after the
conversion to remove_new()) across the GPIO drivers
- remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop
this deprecated symbol
- convert the gpio-altera driver to no longer pull in the deprecated
legacy-of-mm-gpiochip.h header
- use of_property_present() instead of of_property_read_bool() in
gpiolib-of and gpio-rockchip
- allow to build the tegra186 driver on Tegra234 platforms in Kconfig
Late fixes:
- add a missing return value check after devm_kasprintf() to
gpio-grgpio
DT bindings:
- document the ngpios property of gpio-mmio
- add support for a new aspeed model
- fix the example for st,nomadik-gpio
Other:
- kernel doc and comments tweaks
- fix typos in TODO
- reorder headers alphabetically in some drivers
- fix incorrect format specifiers in gpio tools"
* tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits)
gpio: tegra186: Allow to enable driver on Tegra234
gpio: grgpio: Add NULL check in grgpio_probe
tools: gpio: Fix several incorrect format specifiers
gpio: mpfs: add CoreGPIO support
gpio: rockchip: support new version GPIO
gpio: rockchip: change the GPIO version judgment logic
gpio: rockchip: explan the format of the GPIO version ID
gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n)
MAINTAINERS: add gpio driver to PolarFire entry
gpio: Get rid of GPIOF_ACTIVE_LOW
USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW
pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW
leds: gpio: Avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW
gpio: Use of_property_present() for non-boolean properties
gpio: mpfs: add polarfire soc gpio support
gpio: altera: Drop legacy-of-mm-gpiochip.h header
gpio: pcie-idio-24: Replace deprecated PCI functions
gpio: pci-idio-16: Replace deprecated PCI functions
...
|
||
|
Linus Torvalds
|
7d75606665 |
pwm: Changes for v6.13-rc1
This pull request prominently contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. So I expect you will get a part of this tree also via the iio pull request for 6.13-rc1 (tag pwm/duty_offset-for-6.13-rc1). Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmc7DoAACgkQj4D7WH0S /k5tEgf/QJY8mAPPZR45dDo+GdUnZAaV85sseOezeApjB6kMYXKsKWoDC0uQ9m40 t7zkR8rXCk84rYSg4fGpcWL12v03n8cXmABkJUsqkUkLCcU/pifKzxanC25IWMH1 DGCW8tev4/NSe2ud9kLmFR/p85aioIW47Az3QH096Wv+Y5ij3v5e8PHBIaSiWHlb gfQI1XWerHSbAZexF132zGZOD/TBWb6djAQKACh5KWBPWB54zK3n3ngxoOCSMKSh Li8nfVyy32mPurLfTqaTaAHg7uGrcCGOVhqnXSQiuUayMlV/T7FX/uwfF/X/YKFm iqIPoYeUhLHmHJkHLACtPzUajkTJbg== =3d9l -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. The new API requires changes to the lowlevel drivers. For now there are two drivers that are converted to the new API (axi-pwmgen and stm32). Converted drivers continue to work with the old API. Drivers not yet converted only work with the older API. Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review" * tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: Assume a disabled PWM to emit a constant inactive output pwm: core: export pwm_get_state_hw() pwm: core: use device_match_name() instead of strcmp(dev_name(... dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3 pwm: imx27: Use clk_bulk_*() API to simplify clock handling pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle pwm: axi-pwmgen: Enable FORCE_ALIGN by default pwm: axi-pwmgen: Rename 0x10 register dt-bindings: pwm: amlogic: Document C3 PWM pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip pwm: atmel-tcb: Use min() macro pwm: stm32: Fix error checking for a regmap_read() call pwm: Add kernel doc for members added to pwm_ops recently pwm: Reorder symbols in core.c pwm: stm32: Implementation of the waveform callbacks pwm: axi-pwmgen: Implementation of the waveform callbacks pwm: Add tracing for waveform callbacks pwm: Provide new consumer API functions for waveforms pwm: New abstraction for PWM waveforms pwm: Add more locking |
||
|
Linus Torvalds
|
f2ef39727a |
spi: Updates for v6.13
The only real core work we've got this time around is the completion of
the transition to the new host/target naming for the core APIs, Kconfig
still needs doing but that's a lot less invasive. Otherwise the big
changes are the new drivers that have been added:
- Completion of the conversion to spi_alloc_host()/_target() and
removal of the old naming.
- Cleanups for Rockchip drivers, these brought in a new logging helper
in the driver core for warnings during probe.
- Support for configuration of the word delay via spidev_test.
- Support for AMD HID2 controllers, Apple SPI controller and Realtek
SPI-NAND controllers.
The Rockchip cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7QdQACgkQJNaLcl1U
h9A7KAf+Od8ORLheHKrokFYWEW1zuiR45EjqWylLk835d3TQn/VfLOouRDhOPKLw
wmxy5PjjvI+CHa9JY4TXY6iRTCc8By6fkwRWFZN5KApSC2NQriWiqgTSItFfYiLv
yUthZjfRhbfSpf6E/0hq4axpfn+6W/MIWUg7Ag08IEU+GhDd+um8gdpBKsP1BAJF
s34Fn3oJNoze0Wwcq5tZ91S1MsP+2vGFGIGC2HA7G2GAXjGFqBZUnIL+zjC1US3j
XILAoy4Vx4J0Nn+f+zdGL2m5cm6O49ztaKqUxamVFigwM4va5OSOEpcnFMEPZ8HY
013dIg7tiayUTOTcByCpzfMDWuzHig==
=jc6e
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The only real core work we've got this time around is the completion
of the transition to the new host/target naming for the core APIs,
Kconfig still needs doing but that's a lot less invasive.
Otherwise the big changes are the new drivers that have been added:
- Completion of the conversion to spi_alloc_host()/_target() and
removal of the old naming.
- Cleanups for Rockchip drivers, these brought in a new logging
helper in the driver core for warnings during probe.
- Support for configuration of the word delay via spidev_test.
- Support for AMD HID2 controllers, Apple SPI controller and Realtek
SPI-NAND controllers"
* tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits)
spi: imx: support word delay
spi: imx: pass struct spi_transfer to prepare_transfer()
spi: cs42l43: Add GPIO speaker id support to the bridge configuration
spi: Delete useless checks
spi: apple: Remove unnecessary .owner for apple_spi_driver
spi: spidev_test: add support for word delay
spi: apple: Add driver for Apple SPI controller
spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers
spi: Use of_property_present() for non-boolean properties
spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time
spi: spi-mem: rtl-snand: Correctly handle DMA transfers
spi: tegra210-quad: Avoid shift-out-of-bounds
spi: axi-spi-engine: Emit trace events for spi transfers
dt-bindings: spi: sprd,sc9860-spi: convert to YAML
spi: Replace deprecated PCI functions
spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi
spi: spi-mem: Add Realtek SPI-NAND controller
dt-bindings: spi: Add realtek,rtl9301-snand
spi: make class structs const
spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema
...
|
||
|
Linus Torvalds
|
4bd37a902a |
regulator: Updates for v6.13
This was a quite quiet release for regulators on the drivers front, but
we do have two small but useful core improvements:
- Improve handling of cases where DT platforms specify both DT and
init_data based configuration for a single regulator.
- A helper of_regulator_get_optional() to simplify writing generic
bindings for regulator consumers in subsystems.
There's also some YAML conversions for the DT bindings which are a big
part of the diffstat.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7O2AACgkQJNaLcl1U
h9C3Zwf/ZfnNpSjd6hWtsPQROmOXNvVJDvXeyC6ZWQPjBU31VAFt+6rtk/xMVTIp
cxaHG3PzeYkIk1VTm6yO5m3/kalIt4ECsJf62sfNNoltRcl0sJExt6ewKF6QjCN7
9OOAANJIWliApPj1ZQ+IIvddsF2Q0IqyioDLX+suGdNmNaZx4KnLP7dIAcluj3/d
w+pC/CbrrUy2ScFgxLUm3dH16nV8hYm/F9f5Dsob9AV7IpMN0suMwbAd6uq2+KZT
lLUw+kpkASetifhAfCjUGj8PIF+lMwW4WsuWgu4I0qiA9+FRDEyb6f0LQahs3d2G
NO98rrcS9kVYaJ1z83KuMHeYBI44sQ==
=AihX
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This was a quite quiet release for regulators on the drivers front,
but we do have two small but useful core improvements:
- Improve handling of cases where DT platforms specify both DT and
init_data based configuration for a single regulator.
- A helper of_regulator_get_optional() to simplify writing generic
bindings for regulator consumers in subsystems.
There's also some YAML conversions for the DT bindings which are a big
part of the diffstat"
* tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies
regulator: Switch back to struct platform_driver::remove()
regulator: doc: remove documentation comment for regulator_init
regulator: doc: add missing documentation for init_cb
regulator: rk808: Restrict DVS GPIOs to the RK808 variant only
regulator: rk808: Use dev_err_probe() in the probe path
regulator: rk808: Perform trivial code cleanups
regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855
regulator: dt-bindings: lltc,ltc3676: convert to YAML
regulator: core: Use fsleep() to get best sleep mechanism
regulator: core: remove machine init callback from config
regulator: core: add callback to perform runtime init
regulator: core: do not silently ignore provided init_data
regulator: max5970: Drop unused structs
regulator: dt-bindings: vctrl-regulator: convert to YAML
regulator: qcom-smd: make smd_vreg_rpm static
regulator: Call of_node_put() only once in rzg2l_usb_vbus_regulator_probe()
regulator: isl6271a: Drop explicit initialization of struct i2c_device_id::driver_data to 0
regulator: Add devres version of of_regulator_get_optional()
regulator: Add of_regulator_get_optional() for pure DT regulator lookup
|
||
|
Linus Torvalds
|
37c7d3538a |
regmap: Updates for v6.13
The main thing for regmap this time around is some improvements of the lockdep annotations which stop some false positives. We also have one new helper for setting a bitmask to the same value, and several test improvements. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7OlQACgkQJNaLcl1U h9B9nAf5AQIZ8AddQuudV4SoZbS2TWoGOOgjEXQnY245C4kNMnwJ1rIbHu7WJ/OE oVt7ePo7HW0CzpwIrNvdlV+9J3b+XR6xA1/rAJqI+TTPM3FMn33XGZ+0r+ZDVkBT 83/ZwLDPbRIVhwUgyHl0dIb5/pJddYVmJEDFHmRPY9Z8QQ4WPQn4SZvTfvF4y16C CJAV58A7Ei0MmnrJrGV3lF00qpkWMxdlpJu8TYgC1hM/hv9LAvVMEijuCpNR9NR5 udP+jPe2kA+IIlXEfvoxnJ/x9BgSf6CPLYV2nugFZsdGAfhI8EB3v/SC7gqlGVR7 tu4TR55KIh+lthRyD2uFRrI5GlzFvw== =epDO -----END PGP SIGNATURE----- Merge tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "The main thing for regmap this time around is some improvements of the lockdep annotations which stop some false positives. We also have one new helper for setting a bitmask to the same value, and several test improvements" * tag 'regmap-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: provide regmap_assign_bits() regmap: irq: Set lockdep class for hierarchical IRQ domains regmap: maple: Provide lockdep (sub)class for maple tree's internal lock regmap: kunit: Fix repeated test param regcache: Improve documentation of available cache types regmap: Specifically test writing 0 as a value to sparse caches regmap-irq: Consistently use memset32() in regmap_irq_thread() |
||
|
Linus Torvalds
|
856385e0c5 |
linux_kselftest-next-6.13-rc1
kselftest update for Linux 6.13-rc1
-- timers test - removes duplicates defines
-- timers test - fixes to improve error reporting
-- rtc test - adds check rtc alarm status to alarm test
-- resctrl test - adds array overrun checks during iMC config parsing code
-- resctrl test - adds array overflow checks when reading strings
-- resctrl test - fixes and reorganizing code
-----BEGIN PGP SIGNATURE-----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=TIPs
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"timer test:
- remove duplicate defines
- fixes to improve error reporting
rtc test:
- check rtc alarm status in alarm test
resctrl test:
- add array overrun checks during iMC config parsing code and when
reading strings
- fixes and reorganizing code"
* tag 'linux_kselftest-next-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits)
selftests/resctrl: Replace magic constants used as array size
selftests/resctrl: Keep results from first test run
selftests/resctrl: Do not compare performance counters and resctrl at low bandwidth
selftests/resctrl: Use cache size to determine "fill_buf" buffer size
selftests/resctrl: Ensure measurements skip initialization of default benchmark
selftests/resctrl: Make benchmark parameter passing robust
selftests/resctrl: Remove unused measurement code
selftests/resctrl: Only support measured read operation
selftests/resctrl: Remove "once" parameter required to be false
selftests/resctrl: Make wraparound handling obvious
selftests/resctrl: Protect against array overflow when reading strings
selftests/resctrl: Protect against array overrun during iMC config parsing
selftests/resctrl: Fix memory overflow due to unhandled wraparound
selftests/resctrl: Print accurate buffer size as part of MBM results
selftests/resctrl: Make functions only used in same file static
selftests: Add a test mangling with uc_sigmask
selftests: Rename sigaltstack to generic signal
selftest: rtc: Add to check rtc alarm status for alarm related test
selftests:timers: remove local CLOCKID defines
selftests: timers: Remove unneeded semicolon
...
|
||
|
Linus Torvalds
|
f89a687aae |
kgdb patches for 6.13
A relatively modest collection of changes:
* Adopt kstrtoint() and kstrtol() instead of the simple_strtoXX family
for better error checking of user input.
* Align the print behavour when breakpoints are enabled and disabled by
adopting the current behaviour of breakpoint disable for both.
* Remove some of the (rather odd and user hostile) hex fallbacks and
require kdb users to prefix with 0x instead.
* Tidy up (and fix) control code handling in kdb's keyboard code. This
makes the control code handling at the keyboard behave the same way
as it does via the UART.
* Switch my own entry in MAINTAINERS to my @kernel.org address.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAmc7bV4ACgkQfOMlXTn3
iKE9Mw/9G80KzejHGaSbzA17ELmxvCeQYQtnpbOiySpvzmIQWkOT7RBhqvqSD/+b
8tCT1aE/QHgkYRSIGTtCVILMSrJ1v2yJR5yuNOXAQgpwVCKq13hq4t7OFBpd+f2K
kiY+UCpOOLb7okhjwT5I8hwI1wiHw9VOfcVq2BbBrcQPSoPfAI3iQ8PXUZHu4uq9
EB2OZskFxnIRtCJWXzEayXwzpD0mI9j0Ab+TEm32X3RU+BF0kGLfRvTKYl9jWkBc
jsW4BKGOa+dfO5tu8zhVGxk5pssNeomaBNwRLD2EqtlmQJOkiGEk7qsR8z8aeETx
uGbmfa4glrZj1V66bOeq9i+qqoAB9VY4TWw2/KSGOaQYsKHcK58EmSzq5nM0Abex
rJbOBslsTYBMxz0z5qW8GyD20WtjgMSGtCmAu7OmlDJJdcksYsy6CY+gkfUsVS87
ZA4U0y8zvpyjMt2EKMS5o0/511bwzFtWtqEmiEBqfkX/NUJanaEBTt943NbnJEgu
i8J+62B69G2X6gXjRZdncGC+MTWH/o93wmZk5u7bgdO0Wqk9t/EArILp4P9Ieco9
TpblPvcqEjfzBwkQKGMX5zhiR1YHzQn4sC4SmFUjczwuEjnmN0jEPMappG7bxI1c
MEX5mPVQdRHO0N4jN/a7qC5PONbi8gKtnhfmCPbTGPwLF87DOEc=
=rlg/
-----END PGP SIGNATURE-----
Merge tag 'kgdb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"A relatively modest collection of changes:
- Adopt kstrtoint() and kstrtol() instead of the simple_strtoXX
family for better error checking of user input.
- Align the print behavour when breakpoints are enabled and disabled
by adopting the current behaviour of breakpoint disable for both.
- Remove some of the (rather odd and user hostile) hex fallbacks and
require kdb users to prefix with 0x instead.
- Tidy up (and fix) control code handling in kdb's keyboard code.
This makes the control code handling at the keyboard behave the
same way as it does via the UART.
- Switch my own entry in MAINTAINERS to my @kernel.org address"
* tag 'kgdb-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: fix ctrl+e/a/f/b/d/p/n broken in keyboard mode
MAINTAINERS: Use Daniel Thompson's korg address for kgdb work
kdb: Fix breakpoint enable to be silent if already enabled
kdb: Remove fallback interpretation of arbitrary numbers as hex
trace: kdb: Replace simple_strtoul with kstrtoul in kdb_ftdump
kdb: Replace the use of simple_strto with safer kstrto in kdb_main
|
||
|
Linus Torvalds
|
aad3a0d084 |
ftrace updates for v6.13:
- Merged tag ftrace-v6.12-rc4 There was a fix to locking in register_ftrace_graph() for shadow stacks that was sent upstream. But this code was also being rewritten, and the locking fix was needed. Merging this fix was required to continue the work. - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZztrUxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnNAQD6w4q9VQ7oOE2qKLqtnj87h4c1GqKn SPkpEfC3n/ATEAD/fnYjT/eOSlHiGHuD/aTA+U/bETrT99bozGM/4mFKEgY= =6nCa -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes * tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits) ftrace: Show timings of how long nop patching took ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash() ftrace: Use guard to take the ftrace_lock in release_probe() ftrace: Use guard to lock ftrace_lock in cache_mod() ftrace: Use guard for match_records() fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph() fgraph: Give ret_stack its own kmem cache fgraph: Separate size of ret_stack from PAGE_SIZE ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value selftests/ftrace: Fix check of return value in fgraph-retval.tc test ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs ftrace: Make ftrace_regs abstract from direct use fgragh: No need to invoke the function call_filter_check_discard() fgraph: Simplify return address printing in function graph tracer function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr() function_graph: Support recording and printing the function return address ftrace: Have calltime be saved in the fgraph storage ftrace: Use a running sleeptime instead of saving on shadow stack fgraph: Use fgraph data to store subtime for profiler ... |
||
|
Linus Torvalds
|
8f7c8b88bd |
sched_ext: Change for v6.13
- Improve the default select_cpu() implementation making it topology aware
and handle WAKE_SYNC better.
- set_arg_maybe_null() was used to inform the verifier which ops args could
be NULL in a rather hackish way. Use the new __nullable CFI stub tags
instead.
- On Sapphire Rapids multi-socket systems, a BPF scheduler, by hammering on
the same queue across sockets, could live-lock the system to the point
where the system couldn't make reasonable forward progress. This could
lead to soft-lockup triggered resets or stalling out bypass mode switch
and thus BPF scheduler ejection for tens of minutes if not hours. After
trying a number of mitigations, the following set worked reliably:
- Injecting artificial cpu_relax() loops in two places while sched_ext is
trying to turn on the bypass mode.
- Triggering scheduler ejection when soft-lockup detection is imminent (a
quarter of threshold left).
While not the prettiest, the impact both in terms of code complexity and
overhead is minimal.
- A common complaint on the API is the overuse of the word "dispatch" and
the confusion around "consume". This is due to how the dispatch queues
became more generic over time. Rename the affected kfuncs for clarity.
Thanks to BPF's compatibility features, this change can be made in a way
that's both forward and backward compatible. The compatibility code will
be dropped in a few releases.
- Pull sched_ext/for-6.12-fixes to receive a prerequisite change. Other misc
changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZztuXA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGePUAP4nFTDaUDngVlxGv5hpYz8/Gcv1bPsWEydRRmH/
3F+pNgEAmGIGAEwFYfc9Zn8Kbjf0eJAduf2RhGRatQO6F/+GSwo=
=AcyC
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Improve the default select_cpu() implementation making it topology
aware and handle WAKE_SYNC better.
- set_arg_maybe_null() was used to inform the verifier which ops args
could be NULL in a rather hackish way. Use the new __nullable CFI
stub tags instead.
- On Sapphire Rapids multi-socket systems, a BPF scheduler, by
hammering on the same queue across sockets, could live-lock the
system to the point where the system couldn't make reasonable forward
progress.
This could lead to soft-lockup triggered resets or stalling out
bypass mode switch and thus BPF scheduler ejection for tens of
minutes if not hours. After trying a number of mitigations, the
following set worked reliably:
- Injecting artificial cpu_relax() loops in two places while
sched_ext is trying to turn on the bypass mode.
- Triggering scheduler ejection when soft-lockup detection is
imminent (a quarter of threshold left).
While not the prettiest, the impact both in terms of code complexity
and overhead is minimal.
- A common complaint on the API is the overuse of the word "dispatch"
and the confusion around "consume". This is due to how the dispatch
queues became more generic over time. Rename the affected kfuncs for
clarity. Thanks to BPF's compatibility features, this change can be
made in a way that's both forward and backward compatible. The
compatibility code will be dropped in a few releases.
- Other misc changes
* tag 'sched_ext-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (21 commits)
sched_ext: Replace scx_next_task_picked() with switch_class() in comment
sched_ext: Rename scx_bpf_dispatch[_vtime]_from_dsq*() -> scx_bpf_dsq_move[_vtime]*()
sched_ext: Rename scx_bpf_consume() to scx_bpf_dsq_move_to_local()
sched_ext: Rename scx_bpf_dispatch[_vtime]() to scx_bpf_dsq_insert[_vtime]()
sched_ext: scx_bpf_dispatch_from_dsq_set_*() are allowed from unlocked context
sched_ext: add a missing rcu_read_lock/unlock pair at scx_select_cpu_dfl()
sched_ext: Clarify sched_ext_ops table for userland scheduler
sched_ext: Enable the ops breather and eject BPF scheduler on softlockup
sched_ext: Avoid live-locking bypass mode switching
sched_ext: Fix incorrect use of bitwise AND
sched_ext: Do not enable LLC/NUMA optimizations when domains overlap
sched_ext: Introduce NUMA awareness to the default idle selection policy
sched_ext: Replace set_arg_maybe_null() with __nullable CFI stub tags
sched_ext: Rename CFI stubs to names that are recognized by BPF
sched_ext: Introduce LLC awareness to the default idle selection policy
sched_ext: Clarify ops.select_cpu() for single-CPU tasks
sched_ext: improve WAKE_SYNC behavior for default idle CPU selection
sched_ext: Use btf_ids to resolve task_struct
sched/ext: Use tg_cgroup() to elieminate duplicate code
sched/ext: Fix unmatch trailing comment of CONFIG_EXT_GROUP_SCHED
...
|
||
|
Linus Torvalds
|
7586d52765 |
cgroup: Changes for v6.13
- cpu.stat now also shows niced CPU time. - Freezer and cpuset optimizations. - Other misc changes. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZztlgg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGbohAQDE/enqpAX9vSOpQPne4ZzgcPlGTrCwBcka3Z5z 4aOF0AD/SmdjcJ/EULisD/2O27ovsGAtqDjngrrZwNUTbCNkTQQ= =pKyo -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - cpu.stat now also shows niced CPU time - Freezer and cpuset optimizations - Other misc changes * tag 'cgroup-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Disable cpuset_cpumask_can_shrink() test if not load balancing cgroup/cpuset: Further optimize code if CONFIG_CPUSETS_V1 not set cgroup/cpuset: Enforce at most one rebuild_sched_domains_locked() call per operation cgroup/cpuset: Revert "Allow suppression of sched domain rebuild in update_cpumasks_hier()" MAINTAINERS: remove Zefan Li cgroup/freezer: Add cgroup CGRP_FROZEN flag update helper cgroup/freezer: Reduce redundant traversal for cgroup_freeze cgroup/bpf: only cgroup v2 can be attached by bpf programs Revert "cgroup: Fix memory leak caused by missing cgroup_bpf_offline" selftests/cgroup: Fix compile error in test_cpu.c cgroup/rstat: Selftests for niced CPU statistics cgroup/rstat: Tracking cgroup-level niced CPU time cgroup/cpuset: Fix spelling errors in file kernel/cgroup/cpuset.c |