The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The value of reqsize must only be changed through the helper.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an option in Inline IPsec configure mailbox to configure the
CPT_AF_LFX_CTL:CTX_ILEN for inline CPT LF attached to CPT RVU PF.
This is needed to set the ctx ilen to size of inbound SA for
HW errata IPBUCPT-38756. Not setting this would lead to new context's
not being fetched.
Also set FLR_FLUSH in CPT_LF_CTX_CTL for CPT LF's as workaround
for same errata.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register errors interrupts for inline cptlf attached to PF driver
so that SMMU faults and other errors can be reported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
HW has a errata that CPT HW may hit an issue, while processing CPT
instructions with CTX_VAL set and CTX_VAL not set. So, this patch
adds the code to always set the CTX_VAL as a workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Updates CPT inbound inline IPsec configure mailbox to take
CPT credit threshold and bpid, which are introduced
in CN10KB.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT LF must be reset and follow CPT LF disable sequence
suggested by HW team, when driver exits.
This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds code to not execute CPT errata "when CPT_AF_DIAG[FLT_DIS] = 0 and a
CPT engine access to LLC/DRAM encounters a fault/poison, a rare case
may result in unpredictable data being delivered to a CPT engine"
workaround on CN10KA B0/CN10KB HW as it is fixed on these chips.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On CN10KA B0/CN10KB, CPT scatter gather format has modified
to support multi-seg in inline IPsec. Due to this CPT requires
new firmware and doesn't work with CN10KA0/A1 firmware. To make
HW works in backward compatibility mode or works with CN10KA0/A1
firmware, a bit(T106_MODE) is introduced in HW CSR.
This patch adds devlink parameter for configuring T106_MODE.
This patch also documents the devlink parameter under
Documentation/crypto/device_drivers.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Scatter Gather input format for CPT has changed on CN10KB/CN10KA B0 HW
to make it compatible with NIX Scatter Gather format to support SG mode
for inline IPsec. This patch modifies the code to make the driver works
for the same. This patch also enables CPT firmware load for these chips.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT block reset in CPT PF erase all the CPT configuration which is
done in AF driver init. So, remove CPT block reset from CPT PF as
it is also being done in AF init and not required in PF.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
smatch warnings:
drivers/crypto/stm32/stm32-crc32.c:108 stm32_crc_get_next_crc() warn:
can 'crc' even be NULL?
Use list_first_entry_or_null instead of list_first_entry to retrieve
the first device registered.
The function list_first_entry always return a non NULL pointer even if
the list is empty. Hence checking if the pointer returned is NULL does
not tell if the list is empty or not.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/
Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for 420xx devices by including a new device driver that
supports such devices, updates to the firmware loader and capabilities.
Compared to 4xxx devices, 420xx devices have more acceleration engines
(16 service engines and 1 admin) and support the wireless cipher
algorithms ZUC and Snow 3G.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Co-developed-by: Dong Xie <dong.xie@intel.com>
Signed-off-by: Dong Xie <dong.xie@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Relocate the structures adf_fw_objs and adf_fw_config from the file
adf_4xxx_hw_data.c to the newly created adf_fw_config.h.
These structures will be used by new device drivers.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move logic that is common between QAT GEN4 accelerators to the
qat_common folder. This includes addresses of CSRs, setters and
configuration logic.
When moved, functions and defines have been renamed from 4XXX to GEN4.
Code specific to the device is moved to the file adf_gen4_hw_data.c.
Code related to configuration is moved to the newly created
adf_gen4_config.c.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add accel_dev as parameter of the function uof_get_num_objs().
This is in preparation for the introduction of the QAT 420xx driver as
it will allow to reconfigure the ae_mask when a configuration that does
not require all AEs is loaded on the device.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the function get_service_enabled() from adf_4xxx_hw_data.c to
adf_cfg_services.c and rename it as adf_get_service_enabled().
This function is not specific to the 4xxx and will be used by
other QAT drivers.
This does not introduce any functional change.
Signed-off-by: Jie Wang <jie.wang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The scheduled tasklet needs to be executed on device remove.
Fixes: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet")
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes following cleanup issues:
- Missing instruction queue free on cleanup. This
will lead to memory leak.
- lfs->lfs_num is set to zero before cleanup, which
will lead to improper cleanup.
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the printf of an error message and optimized the handling
process of ret.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Deleted a dbg function because this function has the risk of
address leakage. In addition, this function is only used for
debugging in the early stage and is not required in the future.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for optional debugfs statistics support for the IAA
Compression Accelerator. This is enabled by the kernel config item:
CRYPTO_DEV_IAA_CRYPTO_STATS
When enabled, the IAA crypto driver will generate statistics which can
be accessed at /sys/kernel/debug/iaa-crypto/.
See Documentation/driver-api/crypto/iax/iax-crypto.rst for details.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The existing iaa crypto async support provides an implementation that
satisfies the interface but does so in a synchronous manner - it fills
and submits the IDXD descriptor and then waits for it to complete
before returning. This isn't a problem at the moment, since all
existing callers (e.g. zswap) wrap any asynchronous callees in a
synchronous wrapper anyway.
This change makes the iaa crypto async implementation truly
asynchronous: it fills and submits the IDXD descriptor, then returns
immediately with -EINPROGRESS. It also sets the descriptor's 'request
completion irq' bit and sets up a callback with the IDXD driver which
is called when the operation completes and the irq fires. The
existing callers such as zswap use synchronous wrappers to deal with
-EINPROGRESS and so work as expected without any changes.
This mode can be enabled by writing 'async_irq' to the sync_mode
iaa_crypto driver attribute:
echo async_irq > /sys/bus/dsa/drivers/crypto/sync_mode
Async mode without interrupts (caller must poll) can be enabled by
writing 'async' to it:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
The default sync mode can be enabled by writing 'sync' to it:
echo sync > /sys/bus/dsa/drivers/crypto/sync_mode
The sync_mode value setting at the time the IAA algorithms are
registered is captured in each algorithm's crypto_ctx and used for all
compresses and decompresses when using a given algorithm.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch registers the deflate-iaa deflate compression algorithm and
hooks it up to the IAA hardware using the 'fixed' compression mode
introduced in the previous patch.
Because the IAA hardware has a 4k history-window limitation, only
buffers <= 4k, or that have been compressed using a <= 4k history
window, are technically compliant with the deflate spec, which allows
for a window of up to 32k. Because of this limitation, the IAA fixed
mode deflate algorithm is given its own algorithm name, 'deflate-iaa'.
With this change, the deflate-iaa crypto algorithm is registered and
operational, and compression and decompression operations are fully
enabled following the successful binding of the first IAA workqueue
to the iaa_crypto sub-driver.
when there are no IAA workqueues bound to the driver, the IAA crypto
algorithm can be unregistered by removing the module.
A new iaa_crypto 'verify_compress' driver attribute is also added,
allowing the user to toggle compression verification. If set, each
compress will be internally decompressed and the contents verified,
returning error codes if unsuccessful. This can be toggled with 0/1:
echo 0 > /sys/bus/dsa/drivers/crypto/verify_compress
The default setting is '1' - verify all compresses.
The verify_compress value setting at the time the algorithm is
registered is captured in the algorithm's crypto_ctx and used for all
compresses when using the algorithm.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Define an in-kernel API for adding and removing compression modes,
which can be used by kernel modules or other kernel code that
implements IAA compression modes.
Also add a separate file, iaa_crypto_comp_fixed.c, containing huffman
tables generated for the IAA 'fixed' compression mode. Future
compression modes can be added in a similar fashion.
One or more crypto compression algorithms will be created for each
compression mode, each of which can be selected as the compression
algorithm to be used by a particular facility.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The iaa compression/decompression algorithms in later patches need a
way to retrieve an appropriate IAA workqueue depending on how close
the associated IAA device is to the current cpu.
For this purpose, add a per-cpu array of workqueues such that an
appropriate workqueue can be retrieved by simply accessing the per-cpu
array.
Whenever a new workqueue is bound to or unbound from the iaa_crypto
driver, the available workqueues are 'rebalanced' such that work
submitted from a particular CPU is given to the most appropriate
workqueue available. There currently isn't any way for the user to
tweak the way this is done internally - if necessary, knobs can be
added later for that purpose. Current best practice is to configure
and bind at least one workqueue for each IAA device, but as long as
there is at least one workqueue configured and bound to any IAA device
in the system, the iaa_crypto driver will work, albeit most likely not
as efficiently.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Intel Analytics Accelerator (IAA) is a hardware accelerator that
provides very high thoughput compression/decompression compatible with
the DEFLATE compression standard described in RFC 1951, which is the
compression/decompression algorithm exported by this module.
Users can select IAA compress/decompress acceleration by specifying
one of the deflate-iaa* algorithms as the compression algorithm to use
by whatever facility allows asynchronous compression algorithms to be
selected.
For example, zswap can select the IAA fixed deflate algorithm
'deflate-iaa' via:
# echo deflate-iaa > /sys/module/zswap/parameters/compressor
This patch adds iaa_crypto as an idxd sub-driver and tracks iaa
devices and workqueues as they are probed or removed.
[ Based on work originally by George Powley, Jing Lin and Kyung Min
Park ]
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current dev_err_probe will return 0 instead of proper error code if
driver failed to get irq number. Fix the return code.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
NULL check before kfree_sensitive function is not needed.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311301702.LxswfETY-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of the zip alg support related capability
register in hisi_zip_qm_init(), which will be called by hisi_zip_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset failed
and the memory space disabled.
Fixes: db700974b69d ("crypto: hisilicon/zip - support zip capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of the sec alg support related capability
register in sec_qm_init(), which will be called by probe process.
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: 921715b6b782 ("crypto: hisilicon/sec - get algorithm bitmap from registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pre-store the valid value of hpre alg support related capability
register in hpre_qm_init(), which will be called by hpre_probe().
It can reduce the number of capability register queries and avoid
obtaining incorrect values in abnormal scenarios, such as reset
failed and the memory space disabled.
Fixes: f214d59a0603 ("crypto: hisilicon/hpre - support hpre capability")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In previous capability register implementation, qm irq related values
were read from capability registers dynamically when needed. But in
abnormal scenario, e.g. the core is timeout and the device needs to
soft reset and reset failed after disabling the MSE, the device can
not be removed normally, causing the following call trace:
| Call trace:
| pci_irq_vector+0xfc/0x140
| hisi_qm_uninit+0x278/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| device_release_driver+0x3c/0x60
| pci_stop_bus_device+0xfc/0x22c
| pci_stop_and_remove_bus_device+0x38/0x70
| pci_iov_remove_virtfn+0x108/0x1c0
| sriov_disable+0x7c/0x1e4
| pci_disable_sriov+0x4c/0x6c
| hisi_qm_sriov_disable+0x90/0x160 [hisi_qm]
| hpre_remove+0x1a8/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| driver_detach+0x168/0x2d0
| bus_remove_driver+0xc0/0x230
| driver_unregister+0x58/0xdc
| pci_unregister_driver+0x40/0x220
| hpre_exit+0x34/0x64 [hisi_hpre]
| __arm64_sys_delete_module+0x374/0x620
[...]
| Call trace:
| free_msi_irqs+0x25c/0x300
| pci_disable_msi+0x19c/0x264
| pci_free_irq_vectors+0x4c/0x70
| hisi_qm_pci_uninit+0x44/0x90 [hisi_qm]
| hisi_qm_uninit+0x28c/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
[...]
The reason for this call trace is that when the MSE is disabled, the value
of capability registers in the BAR space become invalid. This will make the
subsequent unregister process get the wrong irq vector through capability
registers and get the wrong irq number by pci_irq_vector().
So add a capability table structure to pre-store the valid value of the irq
information capability register in qm init process, avoid obtaining invalid
capability register value after the MSE is disabled.
Fixes: 3536cc55cada ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extract a public function to set qm algs and remove
the similar code for setting qm algs in each module.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
