[ Upstream commit efc0b0bcff ]
In addition to the EINVAL, there may be an ENOMEM.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea078ae910 ]
Resetting rules' stateful data happens outside of the transaction logic,
so 'get' and 'dump' handlers have to emit audit log entries themselves.
Fixes: 8daa8fde3f ("netfilter: nf_tables: Introduce NFT_MSG_GETRULE_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e9be1124d ]
Since set element reset is not integrated into nf_tables' transaction
logic, an explicit log call is needed, similar to NFT_MSG_GETOBJ_RESET
handling.
For the sake of simplicity, catchall element reset will always generate
a dedicated log entry. This relieves nf_tables_dump_set() from having to
adjust the logged element count depending on whether a catchall element
was found or not.
Fixes: 079cd63321 ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eead005664 ]
Currently, 'carryover_ios/bytes' is not handled in throtl_trim_slice(),
for consequence, 'carryover_ios/bytes' will be used to throttle bio
multiple times, for example:
1) set iops limit to 100, and slice start is 0, slice end is 100ms;
2) current time is 0, and 10 ios are dispatched, those io won't be
throttled and io_disp is 10;
3) still at current time 0, update iops limit to 1000, carryover_ios is
updated to (0 - 10) = -10;
4) in this slice(0 - 100ms), io_allowed = 100 + (-10) = 90, which means
only 90 ios can be dispatched without waiting;
5) assume that io is throttled in slice(0 - 100ms), and
throtl_trim_slice() update silce to (100ms - 200ms). In this case,
'carryover_ios/bytes' is not cleared and still only 90 ios can be
dispatched between 100ms - 200ms.
Fix this problem by updating 'carryover_ios/bytes' in
throtl_trim_slice().
Fixes: a880ae93e5 ("blk-throttle: fix io hung due to configuration updates")
Reported-by: zhuxiaohui <zhuxiaohui.400@bytedance.com>
Link: https://lore.kernel.org/all/20230812072116.42321-1-zhuxiaohui.400@bytedance.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5eefc5307c ]
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
Fixes: bcb9aa45d5 ("Revert "drm/i915: Hold reference to intel_context over life of i915_request"")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821153035.3903006-1-andrzej.hajda@intel.com
(cherry picked from commit 280410677a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5439cfa7fe ]
Occasionally, with './test_progs -j' on my vm, I will hit the
following failure:
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
test_cgroup_iter_sleepable:PASS:skel_open 0 nsec
test_cgroup_iter_sleepable:PASS:skel_load 0 nsec
test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec
test_cgroup_iter_sleepable:PASS:iter_create 0 nsec
test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812
#48/5 cgrp_local_storage/cgroup_iter_sleepable:FAIL
#48 cgrp_local_storage:FAIL
Finally, I decided to do some investigation since the test is introduced
by myself. It turns out the reason is due to cgroup_fd with value 0.
In cgroup_iter, a cgroup_fd of value 0 means the root cgroup.
/* from cgroup_iter.c */
if (fd)
cgrp = cgroup_v1v2_get_from_fd(fd);
else if (id)
cgrp = cgroup_get_from_id(id);
else /* walk the entire hierarchy by default. */
cgrp = cgroup_get_from_path("/");
That is why we got cgroup_id 1 instead of expected 2812.
Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in
test_progs. I traced 'close' syscall with stack trace and found the root
cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed
fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also
resolved the above cgroup_iter_sleepable subtest failure.
Fixes: 3b22f98e5a ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230827150551.1743497-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c69290557c ]
There are 256 possible voltage settings for each range, not 256 possible
voltage settings in total.
Fixes: 15a1cd245d ("regulator: tps6287x: Fix missing .n_voltages setting")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com
Link: https://lore.kernel.org/r/20230829-tps-voltages-v1-1-7ba4f958a194@axis.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a84260e314 ]
It has system-wide test and cpu-list test but the cpu-list test fails
sometimes. It runs sleep command on CPU1 and measure both user.slice
and system.slice cgroups by default (on systemd-based systems).
But if the system was idle enough, sometime the system.slice gets no
count and it makes the test failing. Maybe that's because it only looks
at the CPU1, let's add CPU0 to increase the chance it finds some tasks.
Fixes: 7901086014 ("perf test: Add a new test for perf stat cgroup BPF counter")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dd1f81554 ]
Running shellcheck on lock_contention.sh generates below warning:
In stat_bpf_counters_cgrp.sh line 28:
if [ -d /sys/fs/cgroup/system.slice -a -d /sys/fs/cgroup/user.slice ]; then
^-- SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
In stat_bpf_counters_cgrp.sh line 34:
local self_cgrp=$(grep perf_event /proc/self/cgroup | cut -d: -f3)
^-------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^-------^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
In stat_bpf_counters_cgrp.sh line 51:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In stat_bpf_counters_cgrp.sh line 65:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fixed above warnings by:
- Changing the expression [p -a q] to [p] && [q].
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: a84260e314 ("perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5496eac6ad ]
The 'saved_regs' member of the 'svc_i3c_master' structure is not
described in the kernel doc, which produces the following warning:
Function parameter or member 'saved_regs' not described in 'svc_i3c_master'
Add the missing line in the kernel documentation of the parent
structure.
Fixes: 1c5ee2a77b ("i3c: master: svc: fix i3c suspend/resume issue")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308171435.0xQ82lvu-lkp@intel.com/
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230817101853.16805-1-miquel.raynal@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9897009eec ]
PMU caps are written as HEADER_PMU_CAPS or for the special case of the
PMU "cpu" as HEADER_CPU_PMU_CAPS. As the PMU "cpu" is special, and not
any "core" PMU, the logic had become broken and core PMUs not called
"cpu" were not having their caps written.
This affects ARM and s390 non-hybrid PMUs.
Simplify the PMU caps writing logic to scan one fewer time and to be
more explicit in its behavior.
Fixes: 178ddf3bad ("perf header: Avoid hybrid PMU list in write_pmu_caps")
Reported-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b2fd81f2a ]
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
Also remove extraneous if-statement as it can never be entered. The
return value from `strncpy` is it's first argument. In this case,
`...dyndbg_cmd` is an array:
| char dyndbg_cmd[VPU_DYNDBG_CMD_MAX_LEN];
^^^^^^^^^^
This can never be NULL which means `strncpy`'s return value cannot be
NULL here. Just use `strscpy` which is more robust and results in
simpler and less ambiguous code.
Moreover, remove needless `... - 1` as `strscpy`'s implementation
ensures NUL-termination and we do not need to carefully dance around
ending boundaries with a "- 1" anymore.
Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230824-strncpy-drivers-accel-ivpu-ivpu_jsm_msg-c-v1-1-12d9b52d2dff@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4aae44f658 ]
Because LPC32xx PWM controllers have only a single output which is
registered as the only PWM device/channel per controller, it is known in
advance that pwm->hwpwm value is always 0. On basis of this fact
simplify the code by removing operations with pwm->hwpwm, there is no
controls which require channel number as input.
Even though I wasn't aware at the time when I forward ported that patch,
this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL
before devm_pwmchip_add() is called.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3d2813fb17 ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered")
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8af10062d ]
amperene/cache.json file tried to include L1D_CACHE_LMISS while it
doesn't exist in common-and-microarch.json. While this bug doesn't seem to
cause issue in newer kernels with jevents.py script, it prevents building
older perf tools with the backported patch.
Fixes: a9650b7f6f ("perf vendor events arm64: Add AmpereOne core PMU events")
Reported-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Closes: https://lore.kernel.org/all/76bb2e47-ce44-76ae-838e-53279047084d@oracle.com/
Link: https://lore.kernel.org/r/20230803211331.140553-2-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf38e7691c ]
When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver
needs to be loaded manually, for the lack of module alias.
This causes unintended resets in cases where watchdog timer is
set-up by bootloader and the driver is not explicitly loaded.
Add MODULE_ALIAS() to load the driver automatically at boot and
avoid this issue.
Fixes: 87a1ef8058 ("watchdog: add Intel MID watchdog driver support")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abaf1e0355 ]
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
Fixes: eef4fee5e5 ("perf lock: Dynamically allocate lockhash_table")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/lkml/ZN4R1AYfsD2J8lRs@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef23cb5933 ]
While debugging a segfault on 'perf lock contention' without an
available perf.data file I noticed that it was basically calling:
perf_session__delete(ERR_PTR(-1))
Resulting in:
(gdb) run lock contention
Starting program: /root/bin/perf lock contention
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
failed to open perf.data: No such file or directory (try 'perf record' first)
Initializing perf session failed
Program received signal SIGSEGV, Segmentation fault.
0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
2858 if (!session->auxtrace)
(gdb) p session
$1 = (struct perf_session *) 0xffffffffffffffff
(gdb) bt
#0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858
#1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300
#2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161
#3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604
#4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322
#5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375
#6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419
#7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535
(gdb)
So just set it to NULL after using PTR_ERR(session) to decode the error
as perf_session__delete(NULL) is supported.
The same problem was found in 'perf top' after an audit of all
perf_session__new() failure handling.
Fixes: 6ef81c55a2 ("perf session: Return error code for perf_session__new() function on failure")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mukesh Ojha <mojha@codeaurora.org>
Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82b0a10390 ]
Add perf_dlfilter_fns.al_cleanup() to do addr_location__exit() on data
passed via perf_dlfilter_fns.resolve_address().
Add dlfilter-test-api-v2 to the "dlfilter C API" test to test it.
Update documentation, clarifying that data returned by APIs should not
be dereferenced after filter_event() and filter_event_early() return.
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230731091857.10681-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc7f01f1bc ]
For logical OR operator, the actual sample_flags are in the 'groups'
list so it needs to check entries in the list instead. Otherwise it
would show the following error message.
$ sudo perf record -a -e cycles:p --filter 'period > 100 || weight > 0' sleep 1
Error: cycles:p event does not have sample flags 0
failed to set filter "BPF" on event cycles:p with 2 (No such file or directory)
Actually it should warn on 'weight' is used without WEIGHT flag.
Error: cycles:p event does not have PERF_SAMPLE_WEIGHT
Hint: please add -W option to perf record
failed to set filter "BPF" on event cycles:p with 2 (No such file or directory)
Fixes: 4310551b76 ("perf bpf filter: Show warning for missing sample flags")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230811025822.3859771-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5df8ecfe36 ]
Drop the explicit check on the extended CPUID level in cpu_has_svm(), the
kernel's cached CPUID info will leave the entire SVM leaf unset if said
leaf is not supported by hardware. Prior to using cached information,
the check was needed to avoid false positives due to Intel's rather crazy
CPUID behavior of returning the values of the maximum supported leaf if
the specified leaf is unsupported.
Fixes: 682a810887 ("x86/kvm/svm: Simplify cpu_has_svm()")
Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 979e9c9fc9 ]
In 616b14b47a ("perf build: Conditionally define NDEBUG") we
started using NDEBUG=1 when DEBUG=1 isn't present, so code that is
enclosed with assert() is not called.
In dd317df072 ("perf build: Make binutil libraries opt in") we
stopped linking against binutils-devel, for licensing reasons.
Recently people asked me why annotation of BPF programs wasn't working,
i.e. this:
$ perf annotate bpf_prog_5280546344e3f45c_kfree_skb
was returning:
case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF:
scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation");
This was on a fedora rpm, so its new enough that I had to try to test by
rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me.
This combination made this libopcode function not to be called:
assert(bfd_check_format(bfdf, bfd_object));
Changing it to:
if (!bfd_check_format(bfdf, bfd_object))
abort();
Made it work, looking at this "check" function made me realize it
changes the 'bfdf' internal state, i.e. we better call it.
So stop using assert() on it, just call it and abort if it fails.
Probably it is better to propagate the error, etc, but it seems it is
unlikely to fail from the usage done so far and we really need to stop
using libopcodes, so do the quick fix above and move on.
With it we have BPF annotation back working when built with
BUILD_NONDISTRO=1:
⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb | head
No kallsyms or vmlinux with build-id 939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found
Samples: 12 of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period]
bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb
Percent int kfree_skb(struct trace_event_raw_kfree_skb *args) {
nop
33.33 xchg %ax,%ax
push %rbp
mov %rsp,%rbp
sub $0x180,%rsp
push %rbx
push %r13
⬢[acme@toolbox perf-tools-next]$
Fixes: 6987561c9e ("perf annotate: Enable annotation of BPF programs")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mohamed Mahmoud <mmahmoud@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc141c35af ]
The driver has been switched to use IRQF_NO_AUTOEN, but in the error
unwinding and remove paths calls to enable_irq() were left in place, which
will lead to an incorrect enable counter value.
Fixes: bcd9730a04 ("Input: move to use request_irq by IRQF_NO_AUTOEN flag")
Link: https://lore.kernel.org/r/20230724053024.352054-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 687fe7dfb7 ]
Remove option having i2c client contain raw gpio number instead of proper
IRQ number. There are no users of this facility in mainline and it will
allow cleaning up the driver code with regard to wakeup handling, etc.
Link: https://lore.kernel.org/r/20230724053024.352054-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: cc141c35af ("Input: tca6416-keypad - fix interrupt enable disbalance")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 389fbbec26 ]
Immediately mark NMIs as unmasked in response to #VMGEXIT(NMI complete)
instead of setting awaiting_iret_completion and waiting until the *next*
VM-Exit to unmask NMIs. The whole point of "NMI complete" is that the
guest is responsible for telling the hypervisor when it's safe to inject
an NMI, i.e. there's no need to wait. And because there's no IRET to
single-step, the next VM-Exit could be a long time coming, i.e. KVM could
incorrectly hold an NMI pending for far longer than what is required and
expected.
Opportunistically fix a stale reference to HF_IRET_MASK.
Fixes: 916b54a768 ("KVM: x86: Move HF_NMI_MASK and HF_IRET_MASK into "struct vcpu_svm"")
Fixes: 4444dfe405 ("KVM: SVM: Add NMI support for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230615063757.3039121-9-aik@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b30d4f0b69 ]
When no events or PMUs match report an error for event_pmu:
Before:
```
$ perf stat -e 'asdfasdf' -a sleep 1
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
After:
```
$ perf stat -e 'asdfasdf' -a sleep 1
event syntax error: 'asdfasdf'
\___ Bad event name
Unabled to find PMU or event on a PMU of 'asdfasdf'
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Fixes the inadvertent removal when hybrid parsing was modified.
Fixes: 70c90e4a6b ("perf parse-events: Avoid scanning PMUs before parsing")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230627181030.95608-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe1328b5b2 ]
So, let's drop output GPIO direction check and only check GPIO value to set
the initial power state.
Fixes: 706dc68102 ("backlight: gpio: Explicitly set the direction of the GPIO")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230721093342.1532531-1-victor.liu@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c09e20b3c ]
As pointed out by Uwe Kleine-König[1], the changes introduced in
commit c1ff7da03e ("video: backlight: lp855x: Get PWM for PWM mode
during probe") caused the PWM state set up by the bootloader to be
re-set when the driver is probed. This differs from the behavior from
before that patch, where the PWM state would be initialized on the
first brightness change.
Fix this by moving the PWM state initialization into the PWM control
function. Add a new variable, needs_pwm_init, to the device info struct
to allow us to check whether we need the initialization, or whether it
has already been done.
[1] https://lore.kernel.org/lkml/20230614083953.e4kkweddjz7wztby@pengutronix.de/
Fixes: c1ff7da03e ("video: backlight: lp855x: Get PWM for PWM mode during probe")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230714121440.7717-2-aweber.kernel@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0323e8fedd ]
Allocate driver data as first resource in the probe function. This way it
can be used during allocation of the other resources (instead of assigning
these to local variables first and update driver data only when it's
allocated). Also as driver data is allocated using a devm function this
should happen first to have the order of freeing resources in the error
path and the remove function in reverse.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: c11622324c ("pwm: atmel-tcb: Fix resource freeing in error path and remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7962ef1365 ]
In 3cb4d5e00e ("perf trace: Free syscall tp fields in
evsel->priv") it only was freeing if strcmp(evsel->tp_format->system,
"syscalls") returned zero, while the corresponding initialization of
evsel->priv was being performed if it was _not_ zero, i.e. if the tp
system wasn't 'syscalls'.
Just stop looking for that and free it if evsel->priv was set, which
should be equivalent.
Also use the pre-existing evsel_trace__delete() function.
This resolves these leaks, detected with:
$ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin
=================================================================
==481565==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212
#7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097)
#1 0x987966 in zalloc (/home/acme/bin/perf+0x987966)
#2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307
#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333
#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458
#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480
#6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205
#7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891
#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156
#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323
#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377
#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421
#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537
#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f)
SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s).
[root@quaco ~]#
With this we plug all leaks with "perf trace sleep 1".
Fixes: 3cb4d5e00e ("perf trace: Free syscall tp fields in evsel->priv")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e00b8bf56 ]
If the device drops into ultra-low-power mode before being placed
into normal-power mode as part of ATI being triggered, the device
does not assert any interrupts until the ATI routine is restarted
two seconds later.
Solve this problem by adopting the vendor's recommendation, which
calls for the device to be placed into normal-power mode prior to
being configured and ATI being triggered.
The original implementation followed this sequence, but the order
was inadvertently changed as part of the resolution of a separate
erratum.
Fixes: 1e4189d8af ("Input: iqs7222 - protect volatile registers")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/ZKrpHc2Ji9qR25r2@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f33105cdd ]
Commit 97d5f2e9ee ("tools api fs: More thread safety for global
filesystem variables") introduces pthread_once, so the libpthread
should be added at link time, or we'll meet the following compile
error when 'make -C tools/mm':
gcc -Wall -Wextra -I../lib/ -o page-types page-types.c ../lib/api/libapi.a
~/linux/tools/lib/api/fs/fs.c:146: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:147: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:148: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:149: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:150: undefined reference to `pthread_once'
/usr/bin/ld: ../lib/api/libapi.a(libapi-in.o):~/linux/tools/lib/api/fs/fs.c:151:
more undefined references to `pthread_once' follow
collect2: error: ld returned 1 exit status
make: *** [Makefile:22: page-types] Error 1
Link: https://lkml.kernel.org/r/20230831034205.2376653-1-xiexiuqi@huaweicloud.com
Fixes: 97d5f2e9ee ("tools api fs: More thread safety for global filesystem variables")
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a493208079 ]
Breaking out early when a match is found leads to an incorrect num_chans
value when more than one ipcc mailbox channel is used by the same device.
Fixes: e9d50e4b4d ("mailbox: qcom-ipcc: Dynamic alloc for channel arrangement")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b74cd55aa9 ]
First, function gfs2_ail_flush_reqd checks the SDF_FORCE_AIL_FLUSH flag
to determine if an AIL flush should be forced in low-memory situations.
However, it also immediately clears the flag, and when called repeatedly
as in function gfs2_logd, the flag will be lost. Fix that by pulling
the SDF_FORCE_AIL_FLUSH flag check out of gfs2_ail_flush_reqd.
Second, function gfs2_writepages sets the SDF_FORCE_AIL_FLUSH flag
whether or not enough pages were written. If enough pages could be
written, flushing the AIL is unnecessary, though.
Third, gfs2_writepages doesn't wake up logd after setting the
SDF_FORCE_AIL_FLUSH flag, so it can take a long time for logd to react.
It would be preferable to wake up logd, but that hurts the performance
of some workloads and we don't quite understand why so far, so don't
wake up logd so far.
Fixes: b066a4eebd ("gfs2: forcibly flush ail to relieve memory pressure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c377852dd ]
Some error paths don't call acpi_put_table() before returning.
Branch to the correct place instead of doing some direct return.
Fixes: 4d27328827 ("tpm_crb: Add support for CRB devices based on Pluton")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Matthew Garrett <mgarrett@aurora.tech>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
