mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-28 16:56:26 +00:00
05aa8cbeab
Update datasheet references. Replace misleading 'force parameter needed' with 'must be instantiated explicitly'. Explain the reason for the missing auto-detection. Mention all supported chips in Kconfig. Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
49 lines
1.2 KiB
ReStructuredText
49 lines
1.2 KiB
ReStructuredText
Kernel driver lm92
|
|
==================
|
|
|
|
Supported chips:
|
|
|
|
* National Semiconductor / Texas Instruments LM92
|
|
|
|
Prefix: 'lm92'
|
|
|
|
Addresses scanned: I2C 0x48 - 0x4b
|
|
|
|
Datasheet: https://www.ti.com/lit/gpn/LM92
|
|
|
|
* National Semiconductor / Texas Instruments LM76
|
|
|
|
Prefix: 'lm92'
|
|
|
|
Addresses scanned: none, must be instantiated explicitly
|
|
|
|
Datasheet: https://www.ti.com/lit/gpn/LM76
|
|
|
|
* Maxim /Analog Devices MAX6633/MAX6634/MAX6635
|
|
|
|
Prefix: 'max6635'
|
|
|
|
Addresses scanned: none, must be instantiated explicitly
|
|
|
|
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6633-max6635.pdf
|
|
|
|
|
|
Authors:
|
|
- Abraham van der Merwe <abraham@2d3d.co.za>
|
|
- Jean Delvare <jdelvare@suse.de>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements support for the National Semiconductor / Texas
|
|
Instruments LM92 temperature sensor.
|
|
|
|
Each LM92 temperature sensor supports a single temperature sensor. There are
|
|
alarms for high, low, and critical thresholds. There's also an hysteresis to
|
|
control the thresholds for resetting alarms.
|
|
|
|
The driver also supports LM76 and Maxim MAX6633/MAX6634/MAX6635, which are
|
|
mostly compatible but do not have a vendor ID register and therefore must be
|
|
instantiated explicitly.
|