linux-stable/Documentation/hwmon/tmp464.rst
Guenter Roeck 007e433cf0 hwmon: Add driver for Texas Instruments TMP464 and TMP468
Add support for Texas Instruments TMP464 and TMP468 temperature sensor
ICs.

TI's TMP464 is an I2C temperature sensor chip. This chip is similar
to TI's TMP421 chip, but with 16bit-wide registers (instead of
8bit-wide registers). The chip has one local sensor and four remote
sensors. TMP468 is similar to TMP464 but has one local and eight
remote sensors.

Originally-from: Agathe Porte <agathe.porte@nokia.com>
Cc: Agathe Porte <agathe.porte@nokia.com>
Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Tested-by: Agathe Porte <agathe.porte@nokia.com>
Link: https://lore.kernel.org/r/20220222223610.23098-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-03-03 07:40:42 -08:00

74 lines
1.6 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0
Kernel driver tmp464
====================
Supported chips:
* Texas Instruments TMP464
Prefix: 'tmp464'
Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp464.html
* Texas Instruments TMP468
Prefix: 'tmp468'
Addresses scanned: I2C 0x48, 0x49, 0x4a and 0x4b
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp468.html
Authors:
Agathe Porte <agathe.porte@nokia.com>
Guenter Roeck <linux@roeck-us.net>
Description
-----------
This driver implements support for Texas Instruments TMP464 and TMP468
temperature sensor chips. TMP464 provides one local and four remote
sensors. TMP468 provides one local and eight remote sensors.
Temperature is measured in degrees Celsius. The chips are wired over
I2C/SMBus and specified over a temperature range of -40 to +125 degrees
Celsius. Resolution for both the local and remote channels is 0.0625
degree C.
The chips support only temperature measurements. The driver exports
temperature values, limits, and alarms via the following sysfs files:
**temp[1-9]_input**
**temp[1-9]_max**
**temp[1-9]_max_hyst**
**temp[1-9]_max_alarm**
**temp[1-9]_crit**
**temp[1-9]_crit_alarm**
**temp[1-9]_crit_hyst**
**temp[2-9]_offset**
**temp[2-9]_fault**
Each sensor can be individually disabled via Devicetree or from sysfs
via:
**temp[1-9]_enable**
If labels were specified in Devicetree, additional sysfs files will
be present:
**temp[1-9]_label**
The update interval is configurable with the following sysfs attribute.
**update_interval**