linux-stable/Documentation/leds
Linus Torvalds f2debe057f - Limited LED current based on thermal conditions in the QCOM flash LED driver.
- Fixed device child node usage in the BD2606MVV and PCA995x drivers.
 - Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver.
 - Reset the LED controller during the probe in the LM3601X driver.
 - Used device_for_each_child_node() to access device child nodes in the PCA995X driver.
 - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver.
 - Replaced msleep() with usleep_range() in the SUN50I-A100 driver.
 - Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers.
 - Added missing of_node_get for probe duration in the MAX77693 driver.
 - Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes.
 - Used devm_clk_get_enabled() helpers in the LP55XX driver.
 - Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC.
 - Set num_leds after allocation in the GPIO driver.
 - Removed irrelevant blink configuration error message in the PCA9532 driver.
 - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmbxjRMACgkQUa+KL4f8
 d2Ey+Q//WsNhqFE6YQmWIuqd9PznAb64o98JeWWymgM/W4DJkQPpVlK1+ceTWVCW
 OsE8017oiuqD1psK6dkAF+NGB85YUoCSHp1ymPrjN3BYFJfu95xLaHCt7qvKvsCu
 HR29dvscgubxwns5imxtbelwjSbQRxP+qfggyhwgpj6lQ0s5W2mSmKAU45zvnInI
 x4Hn/3cfqCkiJateqGj/tz49C/P2P1y3MXC9V3FBTQEWSsZt/BzMQvV/lxl0Ommn
 +5WAnBRmGN5/PhTpaIl/nD5XgSM3cnTA8rqz4EORQmr4X2nstAvsTj0KEXf8zs7g
 k/VcKmYnlraRJTIkC1kb8FalO7FsF+ubHxkMltEmvsNWEa2b5nhLEpH3RdA+U7B3
 0PpSnO814ii8QuTvbALgwIre5N4kOn0oVS7FMIfDcNy2K4y/RP18xO5Qxc1f5Ssl
 eM/nOBoNISvuLzAnb3AZnMzJiHqiQlH7VW8bUnjb7FcIZqNaKllF5PXhSuSopSvi
 9M9TrHjd7rZ9l7iBlj2Td7ZVNZ092TkwQcaPRyybIAONqWZ101UNlLL/Bxa0UNJ+
 agExjqIQgGDHJCVQrXQAklGVFTgOwjx8qDcuY5r7CTwBEDKBwUQqbIdVa05e1eqq
 Y8mRc0Fao1sZh6ZG1GNFeaFh3aLLcrFMRIa/qqovciKXa/VoNXQ=
 =a/t6
 -----END PGP SIGNATURE-----

Merge tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:

 - Limited LED current based on thermal conditions in the QCOM flash LED
   driver

 - Fixed device child node usage in the BD2606MVV and PCA995x drivers

 - Used device_for_each_child_node_scoped() to access child nodes in the
   IS31FL319X driver

 - Reset the LED controller during the probe in the LM3601X driver

 - Used device_for_each_child_node() to access device child nodes in the
   PCA995X driver

 - Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver

 - Replaced msleep() with usleep_range() in the SUN50I-A100 driver

 - Used scoped device node handling to simplify error paths in the
   AAT1290, KTD2692, and MC13783 drivers

 - Added missing of_node_get for probe duration in the MAX77693 driver

 - Simplified using for_each_available_child_of_node_scoped() loops when
   iterating over device nodes

 - Used devm_clk_get_enabled() helpers in the LP55XX driver

 - Converted DT bindings from TXT to YAML format for various drivers,
   including LM3692x and SC2731-BLTC

 - Set num_leds after allocation in the GPIO driver

 - Removed irrelevant blink configuration error message in the PCA9532
   driver

 - Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
   Omnia driver

* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
  leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
  leds: pca9532: Remove irrelevant blink configuration error message
  leds: gpio: Set num_leds after allocation
  dt-bindings: leds: Convert leds-lm3692x to YAML format
  leds: lp55xx: Use devm_clk_get_enabled() helpers
  leds: as3645a: Use device_* to iterate over device child nodes
  leds: qcom-lpg: Simplify with scoped for each OF child loop
  leds: turris-omnia: Simplify with scoped for each OF child loop
  leds: sc27xx: Simplify with scoped for each OF child loop
  leds: pca9532: Simplify with scoped for each OF child loop
  leds: netxbig: Simplify with scoped for each OF child loop
  leds: mt6323: Simplify with scoped for each OF child loop
  leds: mc13783: Use scoped device node handling to simplify error paths
  leds: lp55xx: Simplify with scoped for each OF child loop
  leds: is31fl32xx: Simplify with scoped for each OF child loop
  leds: bcm6358: Simplify with scoped for each OF child loop
  leds: bcm6328: Simplify with scoped for each OF child loop
  leds: aw2013: Simplify with scoped for each OF child loop
  leds: 88pm860x: Simplify with scoped for each OF child loop
  leds: max77693: Simplify with scoped for each OF child loop
  ...
2024-09-23 14:20:11 -07:00
..
index.rst leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API 2023-05-25 12:16:15 +01:00
leds-blinkm.rst leds: Add multicolor support to BlinkM LED driver 2024-08-01 13:40:02 +01:00
leds-cht-wcove.rst leds: cht-wcove: Add support for breathing mode use hw_pattern sysfs API 2023-05-25 12:16:15 +01:00
leds-class-flash.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
leds-class-multicolor.rst leds: multicolor: Introduce a multicolor class definition 2020-07-22 14:41:29 +02:00
leds-class.rst Documentation: leds: leds-class: Document new Hardware driven LEDs APIs 2023-05-31 09:42:08 +01:00
leds-el15203000.rst docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication 2020-10-30 13:15:03 +01:00
leds-lm3556.rst Documentation: Add leading slash to some paths 2021-03-31 13:49:19 -06:00
leds-lp55xx.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
leds-lp3944.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
leds-lp5521.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
leds-lp5523.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
leds-lp5562.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
leds-mlxcpld.rst docs: leds: fix typo in Documentation/leds/leds-mlxcpld.rst 2024-08-26 15:07:59 -06:00
leds-mt6370-rgb.rst Documentation: leds: MT6370: Use bullet lists for timing variables 2023-03-29 15:38:53 +01:00
leds-qcom-lpg.rst Documentation: leds: Correct spelling 2023-01-30 08:03:46 +00:00
leds-sc27xx.rst docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication 2020-10-30 13:15:03 +01:00
ledtrig-oneshot.rst docs: leds: ledtrig-oneshot: Fix spelling mistake 2023-04-20 14:57:48 +01:00
ledtrig-transient.rst leds: we don't want people to use LED subsystem for vibrations 2020-08-17 18:04:15 +02:00
ledtrig-usbport.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
uleds.rst docs: leds: convert to ReST 2019-06-28 20:57:31 +02:00
well-known-leds.txt leds: Add multicolor support to BlinkM LED driver 2024-08-01 13:40:02 +01:00