linux-stable/drivers/gpio/gpio-aspeed.c
Linus Torvalds 55cb93fd24 Driver core changes for 6.13-rc1
Here is a small set of driver core changes for 6.13-rc1.
 
 Nothing major for this merge cycle, except for the 2 simple merge
 conflicts are here just to make life interesting.
 
 Included in here are:
   - sysfs core changes and preparations for more sysfs api cleanups that
     can come through all driver trees after -rc1 is out
   - fw_devlink fixes based on many reports and debugging sessions
   - list_for_each_reverse() removal, no one was using it!
   - last-minute seq_printf() format string bug found and fixed in many
     drivers all at once.
   - minor bugfixes and changes full details in the shortlog
 
 As mentioned above, there is 2 merge conflicts with your tree, one is
 where the file is removed (easy enough to resolve), the second is a
 build time error, that has been found in linux-next and the fix can be
 seen here:
 	https://lore.kernel.org/r/20241107212645.41252436@canb.auug.org.au
 
 Other than that, the changes here have been in linux-next with no other
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ0lEog8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym+0ACgw6wN+LkLVIHWhxTq5DYHQ0QCxY8AoJrRIcKe
 78h0+OU3OXhOy8JGz62W
 =oI5S
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is a small set of driver core changes for 6.13-rc1.

  Nothing major for this merge cycle, except for the two simple merge
  conflicts are here just to make life interesting.

  Included in here are:

   - sysfs core changes and preparations for more sysfs api cleanups
     that can come through all driver trees after -rc1 is out

   - fw_devlink fixes based on many reports and debugging sessions

   - list_for_each_reverse() removal, no one was using it!

   - last-minute seq_printf() format string bug found and fixed in many
     drivers all at once.

   - minor bugfixes and changes full details in the shortlog"

* tag 'driver-core-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
  Fix a potential abuse of seq_printf() format string in drivers
  cpu: Remove spurious NULL in attribute_group definition
  s390/con3215: Remove spurious NULL in attribute_group definition
  perf: arm-ni: Remove spurious NULL in attribute_group definition
  driver core: Constify bin_attribute definitions
  sysfs: attribute_group: allow registration of const bin_attribute
  firmware_loader: Fix possible resource leak in fw_log_firmware_info()
  drivers: core: fw_devlink: Fix excess parameter description in docstring
  driver core: class: Correct WARN() message in APIs class_(for_each|find)_device()
  cacheinfo: Use of_property_present() for non-boolean properties
  cdx: Fix cdx_mmap_resource() after constifying attr in ->mmap()
  drivers: core: fw_devlink: Make the error message a bit more useful
  phy: tegra: xusb: Set fwnode for xusb port devices
  drm: display: Set fwnode for aux bus devices
  driver core: fw_devlink: Stop trying to optimize cycle detection logic
  driver core: Constify attribute arguments of binary attributes
  sysfs: bin_attribute: add const read/write callback variants
  sysfs: implement all BIN_ATTR_* macros in terms of __BIN_ATTR()
  sysfs: treewide: constify attribute callback of bin_attribute::llseek()
  sysfs: treewide: constify attribute callback of bin_attribute::mmap()
  ...
2024-11-29 11:43:29 -08:00

1443 lines
38 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2015 IBM Corp.
*
* Joel Stanley <joel@jms.id.au>
*/
#include <linux/clk.h>
#include <linux/gpio/aspeed.h>
#include <linux/gpio/driver.h>
#include <linux/hashtable.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <asm/div64.h>
/*
* These two headers aren't meant to be used by GPIO drivers. We need
* them in order to access gpio_chip_hwgpio() which we need to implement
* the aspeed specific API which allows the coprocessor to request
* access to some GPIOs and to arbitrate between coprocessor and ARM.
*/
#include <linux/gpio/consumer.h>
#include "gpiolib.h"
/* Non-constant mask variant of FIELD_GET() and FIELD_PREP() */
#define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1))
#define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask))
#define GPIO_G7_IRQ_STS_BASE 0x100
#define GPIO_G7_IRQ_STS_OFFSET(x) (GPIO_G7_IRQ_STS_BASE + (x) * 0x4)
#define GPIO_G7_CTRL_REG_BASE 0x180
#define GPIO_G7_CTRL_REG_OFFSET(x) (GPIO_G7_CTRL_REG_BASE + (x) * 0x4)
#define GPIO_G7_CTRL_OUT_DATA BIT(0)
#define GPIO_G7_CTRL_DIR BIT(1)
#define GPIO_G7_CTRL_IRQ_EN BIT(2)
#define GPIO_G7_CTRL_IRQ_TYPE0 BIT(3)
#define GPIO_G7_CTRL_IRQ_TYPE1 BIT(4)
#define GPIO_G7_CTRL_IRQ_TYPE2 BIT(5)
#define GPIO_G7_CTRL_RST_TOLERANCE BIT(6)
#define GPIO_G7_CTRL_DEBOUNCE_SEL1 BIT(7)
#define GPIO_G7_CTRL_DEBOUNCE_SEL2 BIT(8)
#define GPIO_G7_CTRL_INPUT_MASK BIT(9)
#define GPIO_G7_CTRL_IRQ_STS BIT(12)
#define GPIO_G7_CTRL_IN_DATA BIT(13)
struct aspeed_bank_props {
unsigned int bank;
u32 input;
u32 output;
};
struct aspeed_gpio_config {
unsigned int nr_gpios;
const struct aspeed_bank_props *props;
const struct aspeed_gpio_llops *llops;
const int *debounce_timers_array;
int debounce_timers_num;
bool require_dcache;
};
/*
* @offset_timer: Maps an offset to an @timer_users index, or zero if disabled
* @timer_users: Tracks the number of users for each timer
*
* The @timer_users has four elements but the first element is unused. This is
* to simplify accounting and indexing, as a zero value in @offset_timer
* represents disabled debouncing for the GPIO. Any other value for an element
* of @offset_timer is used as an index into @timer_users. This behaviour of
* the zero value aligns with the behaviour of zero built from the timer
* configuration registers (i.e. debouncing is disabled).
*/
struct aspeed_gpio {
struct gpio_chip chip;
struct device *dev;
raw_spinlock_t lock;
void __iomem *base;
int irq;
const struct aspeed_gpio_config *config;
u8 *offset_timer;
unsigned int timer_users[4];
struct clk *clk;
u32 *dcache;
u8 *cf_copro_bankmap;
};
struct aspeed_gpio_bank {
uint16_t val_regs; /* +0: Rd: read input value, Wr: set write latch
* +4: Rd/Wr: Direction (0=in, 1=out)
*/
uint16_t rdata_reg; /* Rd: read write latch, Wr: <none> */
uint16_t irq_regs;
uint16_t debounce_regs;
uint16_t tolerance_regs;
uint16_t cmdsrc_regs;
};
/*
* Note: The "value" register returns the input value sampled on the
* line even when the GPIO is configured as an output. Since
* that input goes through synchronizers, writing, then reading
* back may not return the written value right away.
*
* The "rdata" register returns the content of the write latch
* and thus can be used to read back what was last written
* reliably.
*/
static const int debounce_timers[4] = { 0x00, 0x50, 0x54, 0x58 };
static const int g7_debounce_timers[4] = { 0x00, 0x00, 0x04, 0x08 };
/*
* The debounce timers array is used to configure the debounce timer settings.Heres how it works:
* Array Value: Indicates the offset for configuring the debounce timer.
* Array Index: Corresponds to the debounce setting register.
* The debounce timers array follows this pattern for configuring the debounce setting registers:
* Array Index 0: No debounce timer is set;
* Array Value is irrelevant (dont care).
* Array Index 1: Debounce setting #2 is set to 1, and debounce setting #1 is set to 0.
* Array Value: offset for configuring debounce timer 0 (g4: 0x50, g7: 0x00)
* Array Index 2: Debounce setting #2 is set to 0, and debounce setting #1 is set to 1.
* Array Value: offset for configuring debounce timer 1 (g4: 0x54, g7: 0x04)
* Array Index 3: Debounce setting #2 is set to 1, and debounce setting #1 is set to 1.
* Array Value: offset for configuring debounce timer 2 (g4: 0x58, g7: 0x8)
*/
static const struct aspeed_gpio_copro_ops *copro_ops;
static void *copro_data;
static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
{
.val_regs = 0x0000,
.rdata_reg = 0x00c0,
.irq_regs = 0x0008,
.debounce_regs = 0x0040,
.tolerance_regs = 0x001c,
.cmdsrc_regs = 0x0060,
},
{
.val_regs = 0x0020,
.rdata_reg = 0x00c4,
.irq_regs = 0x0028,
.debounce_regs = 0x0048,
.tolerance_regs = 0x003c,
.cmdsrc_regs = 0x0068,
},
{
.val_regs = 0x0070,
.rdata_reg = 0x00c8,
.irq_regs = 0x0098,
.debounce_regs = 0x00b0,
.tolerance_regs = 0x00ac,
.cmdsrc_regs = 0x0090,
},
{
.val_regs = 0x0078,
.rdata_reg = 0x00cc,
.irq_regs = 0x00e8,
.debounce_regs = 0x0100,
.tolerance_regs = 0x00fc,
.cmdsrc_regs = 0x00e0,
},
{
.val_regs = 0x0080,
.rdata_reg = 0x00d0,
.irq_regs = 0x0118,
.debounce_regs = 0x0130,
.tolerance_regs = 0x012c,
.cmdsrc_regs = 0x0110,
},
{
.val_regs = 0x0088,
.rdata_reg = 0x00d4,
.irq_regs = 0x0148,
.debounce_regs = 0x0160,
.tolerance_regs = 0x015c,
.cmdsrc_regs = 0x0140,
},
{
.val_regs = 0x01E0,
.rdata_reg = 0x00d8,
.irq_regs = 0x0178,
.debounce_regs = 0x0190,
.tolerance_regs = 0x018c,
.cmdsrc_regs = 0x0170,
},
{
.val_regs = 0x01e8,
.rdata_reg = 0x00dc,
.irq_regs = 0x01a8,
.debounce_regs = 0x01c0,
.tolerance_regs = 0x01bc,
.cmdsrc_regs = 0x01a0,
},
};
enum aspeed_gpio_reg {
reg_val,
reg_rdata,
reg_dir,
reg_irq_enable,
reg_irq_type0,
reg_irq_type1,
reg_irq_type2,
reg_irq_status,
reg_debounce_sel1,
reg_debounce_sel2,
reg_tolerance,
reg_cmdsrc0,
reg_cmdsrc1,
};
struct aspeed_gpio_llops {
void (*reg_bit_set)(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg, bool val);
bool (*reg_bit_get)(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg);
int (*reg_bank_get)(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg);
void (*privilege_ctrl)(struct aspeed_gpio *gpio, unsigned int offset, int owner);
void (*privilege_init)(struct aspeed_gpio *gpio);
bool (*copro_request)(struct aspeed_gpio *gpio, unsigned int offset);
void (*copro_release)(struct aspeed_gpio *gpio, unsigned int offset);
};
#define GPIO_VAL_VALUE 0x00
#define GPIO_VAL_DIR 0x04
#define GPIO_IRQ_ENABLE 0x00
#define GPIO_IRQ_TYPE0 0x04
#define GPIO_IRQ_TYPE1 0x08
#define GPIO_IRQ_TYPE2 0x0c
#define GPIO_IRQ_STATUS 0x10
#define GPIO_DEBOUNCE_SEL1 0x00
#define GPIO_DEBOUNCE_SEL2 0x04
#define GPIO_CMDSRC_0 0x00
#define GPIO_CMDSRC_1 0x04
#define GPIO_CMDSRC_ARM 0
#define GPIO_CMDSRC_LPC 1
#define GPIO_CMDSRC_COLDFIRE 2
#define GPIO_CMDSRC_RESERVED 3
/* This will be resolved at compile time */
static void __iomem *aspeed_gpio_g4_bank_reg(struct aspeed_gpio *gpio,
const struct aspeed_gpio_bank *bank,
const enum aspeed_gpio_reg reg)
{
switch (reg) {
case reg_val:
return gpio->base + bank->val_regs + GPIO_VAL_VALUE;
case reg_rdata:
return gpio->base + bank->rdata_reg;
case reg_dir:
return gpio->base + bank->val_regs + GPIO_VAL_DIR;
case reg_irq_enable:
return gpio->base + bank->irq_regs + GPIO_IRQ_ENABLE;
case reg_irq_type0:
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE0;
case reg_irq_type1:
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE1;
case reg_irq_type2:
return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
case reg_irq_status:
return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
case reg_debounce_sel1:
return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL1;
case reg_debounce_sel2:
return gpio->base + bank->debounce_regs + GPIO_DEBOUNCE_SEL2;
case reg_tolerance:
return gpio->base + bank->tolerance_regs;
case reg_cmdsrc0:
return gpio->base + bank->cmdsrc_regs + GPIO_CMDSRC_0;
case reg_cmdsrc1:
return gpio->base + bank->cmdsrc_regs + GPIO_CMDSRC_1;
}
BUG();
}
static u32 aspeed_gpio_g7_reg_mask(const enum aspeed_gpio_reg reg)
{
switch (reg) {
case reg_val:
return GPIO_G7_CTRL_OUT_DATA;
case reg_dir:
return GPIO_G7_CTRL_DIR;
case reg_irq_enable:
return GPIO_G7_CTRL_IRQ_EN;
case reg_irq_type0:
return GPIO_G7_CTRL_IRQ_TYPE0;
case reg_irq_type1:
return GPIO_G7_CTRL_IRQ_TYPE1;
case reg_irq_type2:
return GPIO_G7_CTRL_IRQ_TYPE2;
case reg_tolerance:
return GPIO_G7_CTRL_RST_TOLERANCE;
case reg_debounce_sel1:
return GPIO_G7_CTRL_DEBOUNCE_SEL1;
case reg_debounce_sel2:
return GPIO_G7_CTRL_DEBOUNCE_SEL2;
case reg_rdata:
return GPIO_G7_CTRL_OUT_DATA;
case reg_irq_status:
return GPIO_G7_CTRL_IRQ_STS;
case reg_cmdsrc0:
case reg_cmdsrc1:
default:
WARN_ON_ONCE(1);
return 0;
}
}
#define GPIO_BANK(x) ((x) >> 5)
#define GPIO_OFFSET(x) ((x) & 0x1f)
#define GPIO_BIT(x) BIT(GPIO_OFFSET(x))
static const struct aspeed_gpio_bank *to_bank(unsigned int offset)
{
unsigned int bank = GPIO_BANK(offset);
WARN_ON(bank >= ARRAY_SIZE(aspeed_gpio_banks));
return &aspeed_gpio_banks[bank];
}
static inline bool is_bank_props_sentinel(const struct aspeed_bank_props *props)
{
return !(props->input || props->output);
}
static inline const struct aspeed_bank_props *find_bank_props(
struct aspeed_gpio *gpio, unsigned int offset)
{
const struct aspeed_bank_props *props = gpio->config->props;
while (!is_bank_props_sentinel(props)) {
if (props->bank == GPIO_BANK(offset))
return props;
props++;
}
return NULL;
}
static inline bool have_gpio(struct aspeed_gpio *gpio, unsigned int offset)
{
const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
if (offset >= gpio->chip.ngpio)
return false;
return (!props || ((props->input | props->output) & GPIO_BIT(offset)));
}
static inline bool have_input(struct aspeed_gpio *gpio, unsigned int offset)
{
const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
return !props || (props->input & GPIO_BIT(offset));
}
#define have_irq(g, o) have_input((g), (o))
#define have_debounce(g, o) have_input((g), (o))
static inline bool have_output(struct aspeed_gpio *gpio, unsigned int offset)
{
const struct aspeed_bank_props *props = find_bank_props(gpio, offset);
return !props || (props->output & GPIO_BIT(offset));
}
static void aspeed_gpio_change_cmd_source(struct aspeed_gpio *gpio, unsigned int offset, int cmdsrc)
{
if (gpio->config->llops->privilege_ctrl)
gpio->config->llops->privilege_ctrl(gpio, offset, cmdsrc);
}
static bool aspeed_gpio_copro_request(struct aspeed_gpio *gpio,
unsigned int offset)
{
if (gpio->config->llops->copro_request)
return gpio->config->llops->copro_request(gpio, offset);
return false;
}
static void aspeed_gpio_copro_release(struct aspeed_gpio *gpio,
unsigned int offset)
{
if (gpio->config->llops->copro_release)
gpio->config->llops->copro_release(gpio, offset);
}
static bool aspeed_gpio_support_copro(struct aspeed_gpio *gpio)
{
return gpio->config->llops->copro_request && gpio->config->llops->copro_release &&
gpio->config->llops->privilege_ctrl && gpio->config->llops->privilege_init;
}
static int aspeed_gpio_get(struct gpio_chip *gc, unsigned int offset)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
return gpio->config->llops->reg_bit_get(gpio, offset, reg_val);
}
static void __aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
int val)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
gpio->config->llops->reg_bit_set(gpio, offset, reg_val, val);
/* Flush write */
gpio->config->llops->reg_bit_get(gpio, offset, reg_val);
}
static void aspeed_gpio_set(struct gpio_chip *gc, unsigned int offset,
int val)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
bool copro = false;
raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
__aspeed_gpio_set(gc, offset, val);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static int aspeed_gpio_dir_in(struct gpio_chip *gc, unsigned int offset)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
bool copro = false;
if (!have_input(gpio, offset))
return -ENOTSUPP;
raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
gpio->config->llops->reg_bit_set(gpio, offset, reg_dir, 0);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
static int aspeed_gpio_dir_out(struct gpio_chip *gc,
unsigned int offset, int val)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
bool copro = false;
if (!have_output(gpio, offset))
return -ENOTSUPP;
raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
__aspeed_gpio_set(gc, offset, val);
gpio->config->llops->reg_bit_set(gpio, offset, reg_dir, 1);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
static int aspeed_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
unsigned long flags;
u32 val;
if (!have_input(gpio, offset))
return GPIO_LINE_DIRECTION_OUT;
if (!have_output(gpio, offset))
return GPIO_LINE_DIRECTION_IN;
raw_spin_lock_irqsave(&gpio->lock, flags);
val = gpio->config->llops->reg_bit_get(gpio, offset, reg_dir);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return val ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
}
static inline int irqd_to_aspeed_gpio_data(struct irq_data *d,
struct aspeed_gpio **gpio,
int *offset)
{
struct aspeed_gpio *internal;
*offset = irqd_to_hwirq(d);
internal = irq_data_get_irq_chip_data(d);
/* This might be a bit of a questionable place to check */
if (!have_irq(internal, *offset))
return -ENOTSUPP;
*gpio = internal;
return 0;
}
static void aspeed_gpio_irq_ack(struct irq_data *d)
{
struct aspeed_gpio *gpio;
unsigned long flags;
int rc, offset;
bool copro = false;
rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset);
if (rc)
return;
raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
gpio->config->llops->reg_bit_set(gpio, offset, reg_irq_status, 1);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
}
static void aspeed_gpio_irq_set_mask(struct irq_data *d, bool set)
{
struct aspeed_gpio *gpio;
unsigned long flags;
int rc, offset;
bool copro = false;
rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset);
if (rc)
return;
/* Unmasking the IRQ */
if (set)
gpiochip_enable_irq(&gpio->chip, irqd_to_hwirq(d));
raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
gpio->config->llops->reg_bit_set(gpio, offset, reg_irq_enable, set);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
/* Masking the IRQ */
if (!set)
gpiochip_disable_irq(&gpio->chip, irqd_to_hwirq(d));
}
static void aspeed_gpio_irq_mask(struct irq_data *d)
{
aspeed_gpio_irq_set_mask(d, false);
}
static void aspeed_gpio_irq_unmask(struct irq_data *d)
{
aspeed_gpio_irq_set_mask(d, true);
}
static int aspeed_gpio_set_type(struct irq_data *d, unsigned int type)
{
u32 type0 = 0;
u32 type1 = 0;
u32 type2 = 0;
irq_flow_handler_t handler;
struct aspeed_gpio *gpio;
unsigned long flags;
int rc, offset;
bool copro = false;
rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset);
if (rc)
return -EINVAL;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_BOTH:
type2 = 1;
fallthrough;
case IRQ_TYPE_EDGE_RISING:
type0 = 1;
fallthrough;
case IRQ_TYPE_EDGE_FALLING:
handler = handle_edge_irq;
break;
case IRQ_TYPE_LEVEL_HIGH:
type0 = 1;
fallthrough;
case IRQ_TYPE_LEVEL_LOW:
type1 = 1;
handler = handle_level_irq;
break;
default:
return -EINVAL;
}
raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
gpio->config->llops->reg_bit_set(gpio, offset, reg_irq_type0, type0);
gpio->config->llops->reg_bit_set(gpio, offset, reg_irq_type1, type1);
gpio->config->llops->reg_bit_set(gpio, offset, reg_irq_type2, type2);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
irq_set_handler_locked(d, handler);
return 0;
}
static void aspeed_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct irq_chip *ic = irq_desc_get_chip(desc);
unsigned int i, p, banks;
unsigned long reg;
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
chained_irq_enter(ic, desc);
banks = DIV_ROUND_UP(gpio->chip.ngpio, 32);
for (i = 0; i < banks; i++) {
reg = gpio->config->llops->reg_bank_get(gpio, i * 32, reg_irq_status);
for_each_set_bit(p, &reg, 32)
generic_handle_domain_irq(gc->irq.domain, i * 32 + p);
}
chained_irq_exit(ic, desc);
}
static void aspeed_init_irq_valid_mask(struct gpio_chip *gc,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct aspeed_gpio *gpio = gpiochip_get_data(gc);
const struct aspeed_bank_props *props = gpio->config->props;
while (!is_bank_props_sentinel(props)) {
unsigned int offset;
const unsigned long int input = props->input;
/* Pretty crummy approach, but similar to GPIO core */
for_each_clear_bit(offset, &input, 32) {
unsigned int i = props->bank * 32 + offset;
if (i >= gpio->chip.ngpio)
break;
clear_bit(i, valid_mask);
}
props++;
}
}
static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
unsigned int offset, bool enable)
{
struct aspeed_gpio *gpio = gpiochip_get_data(chip);
unsigned long flags;
bool copro = false;
raw_spin_lock_irqsave(&gpio->lock, flags);
copro = aspeed_gpio_copro_request(gpio, offset);
gpio->config->llops->reg_bit_set(gpio, offset, reg_tolerance, enable);
if (copro)
aspeed_gpio_copro_release(gpio, offset);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return 0;
}
static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
{
if (!have_gpio(gpiochip_get_data(chip), offset))
return -ENODEV;
return pinctrl_gpio_request(chip, offset);
}
static void aspeed_gpio_free(struct gpio_chip *chip, unsigned int offset)
{
pinctrl_gpio_free(chip, offset);
}
static int usecs_to_cycles(struct aspeed_gpio *gpio, unsigned long usecs,
u32 *cycles)
{
u64 rate;
u64 n;
u32 r;
rate = clk_get_rate(gpio->clk);
if (!rate)
return -ENOTSUPP;
n = rate * usecs;
r = do_div(n, 1000000);
if (n >= U32_MAX)
return -ERANGE;
/* At least as long as the requested time */
*cycles = n + (!!r);
return 0;
}
/* Call under gpio->lock */
static int register_allocated_timer(struct aspeed_gpio *gpio,
unsigned int offset, unsigned int timer)
{
if (WARN(gpio->offset_timer[offset] != 0,
"Offset %d already allocated timer %d\n",
offset, gpio->offset_timer[offset]))
return -EINVAL;
if (WARN(gpio->timer_users[timer] == UINT_MAX,
"Timer user count would overflow\n"))
return -EPERM;
gpio->offset_timer[offset] = timer;
gpio->timer_users[timer]++;
return 0;
}
/* Call under gpio->lock */
static int unregister_allocated_timer(struct aspeed_gpio *gpio,
unsigned int offset)
{
if (WARN(gpio->offset_timer[offset] == 0,
"No timer allocated to offset %d\n", offset))
return -EINVAL;
if (WARN(gpio->timer_users[gpio->offset_timer[offset]] == 0,
"No users recorded for timer %d\n",
gpio->offset_timer[offset]))
return -EINVAL;
gpio->timer_users[gpio->offset_timer[offset]]--;
gpio->offset_timer[offset] = 0;
return 0;
}
/* Call under gpio->lock */
static inline bool timer_allocation_registered(struct aspeed_gpio *gpio,
unsigned int offset)
{
return gpio->offset_timer[offset] > 0;
}
/* Call under gpio->lock */
static void configure_timer(struct aspeed_gpio *gpio, unsigned int offset,
unsigned int timer)
{
/* Note: Debounce timer isn't under control of the command
* source registers, so no need to sync with the coprocessor
*/
gpio->config->llops->reg_bit_set(gpio, offset, reg_debounce_sel1, !!(timer & BIT(1)));
gpio->config->llops->reg_bit_set(gpio, offset, reg_debounce_sel2, !!(timer & BIT(0)));
}
static int enable_debounce(struct gpio_chip *chip, unsigned int offset,
unsigned long usecs)
{
struct aspeed_gpio *gpio = gpiochip_get_data(chip);
u32 requested_cycles;
unsigned long flags;
int rc;
int i;
if (!gpio->clk)
return -EINVAL;
rc = usecs_to_cycles(gpio, usecs, &requested_cycles);
if (rc < 0) {
dev_warn(chip->parent, "Failed to convert %luus to cycles at %luHz: %d\n",
usecs, clk_get_rate(gpio->clk), rc);
return rc;
}
raw_spin_lock_irqsave(&gpio->lock, flags);
if (timer_allocation_registered(gpio, offset)) {
rc = unregister_allocated_timer(gpio, offset);
if (rc < 0)
goto out;
}
/* Try to find a timer already configured for the debounce period */
for (i = 1; i < gpio->config->debounce_timers_num; i++) {
u32 cycles;
cycles = ioread32(gpio->base + gpio->config->debounce_timers_array[i]);
if (requested_cycles == cycles)
break;
}
if (i == gpio->config->debounce_timers_num) {
int j;
/*
* As there are no timers configured for the requested debounce
* period, find an unused timer instead
*/
for (j = 1; j < ARRAY_SIZE(gpio->timer_users); j++) {
if (gpio->timer_users[j] == 0)
break;
}
if (j == ARRAY_SIZE(gpio->timer_users)) {
dev_warn(chip->parent,
"Debounce timers exhausted, cannot debounce for period %luus\n",
usecs);
rc = -EPERM;
/*
* We already adjusted the accounting to remove @offset
* as a user of its previous timer, so also configure
* the hardware so @offset has timers disabled for
* consistency.
*/
configure_timer(gpio, offset, 0);
goto out;
}
i = j;
iowrite32(requested_cycles, gpio->base + gpio->config->debounce_timers_array[i]);
}
if (WARN(i == 0, "Cannot register index of disabled timer\n")) {
rc = -EINVAL;
goto out;
}
register_allocated_timer(gpio, offset, i);
configure_timer(gpio, offset, i);
out:
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
static int disable_debounce(struct gpio_chip *chip, unsigned int offset)
{
struct aspeed_gpio *gpio = gpiochip_get_data(chip);
unsigned long flags;
int rc;
raw_spin_lock_irqsave(&gpio->lock, flags);
rc = unregister_allocated_timer(gpio, offset);
if (!rc)
configure_timer(gpio, offset, 0);
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
static int set_debounce(struct gpio_chip *chip, unsigned int offset,
unsigned long usecs)
{
struct aspeed_gpio *gpio = gpiochip_get_data(chip);
if (!have_debounce(gpio, offset))
return -ENOTSUPP;
if (usecs)
return enable_debounce(chip, offset, usecs);
return disable_debounce(chip, offset);
}
static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
unsigned long config)
{
unsigned long param = pinconf_to_config_param(config);
u32 arg = pinconf_to_config_argument(config);
if (param == PIN_CONFIG_INPUT_DEBOUNCE)
return set_debounce(chip, offset, arg);
else if (param == PIN_CONFIG_BIAS_DISABLE ||
param == PIN_CONFIG_BIAS_PULL_DOWN ||
param == PIN_CONFIG_DRIVE_STRENGTH)
return pinctrl_gpio_set_config(chip, offset, config);
else if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN ||
param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
/* Return -ENOTSUPP to trigger emulation, as per datasheet */
return -ENOTSUPP;
else if (param == PIN_CONFIG_PERSIST_STATE)
return aspeed_gpio_reset_tolerance(chip, offset, arg);
return -ENOTSUPP;
}
/**
* aspeed_gpio_copro_set_ops - Sets the callbacks used for handshaking with
* the coprocessor for shared GPIO banks
* @ops: The callbacks
* @data: Pointer passed back to the callbacks
*/
int aspeed_gpio_copro_set_ops(const struct aspeed_gpio_copro_ops *ops, void *data)
{
copro_data = data;
copro_ops = ops;
return 0;
}
EXPORT_SYMBOL_GPL(aspeed_gpio_copro_set_ops);
/**
* aspeed_gpio_copro_grab_gpio - Mark a GPIO used by the coprocessor. The entire
* bank gets marked and any access from the ARM will
* result in handshaking via callbacks.
* @desc: The GPIO to be marked
* @vreg_offset: If non-NULL, returns the value register offset in the GPIO space
* @dreg_offset: If non-NULL, returns the data latch register offset in the GPIO space
* @bit: If non-NULL, returns the bit number of the GPIO in the registers
*/
int aspeed_gpio_copro_grab_gpio(struct gpio_desc *desc,
u16 *vreg_offset, u16 *dreg_offset, u8 *bit)
{
struct gpio_chip *chip = gpiod_to_chip(desc);
struct aspeed_gpio *gpio = gpiochip_get_data(chip);
int rc = 0, bindex, offset = gpio_chip_hwgpio(desc);
const struct aspeed_gpio_bank *bank = to_bank(offset);
unsigned long flags;
if (!aspeed_gpio_support_copro(gpio))
return -EOPNOTSUPP;
if (!gpio->cf_copro_bankmap)
gpio->cf_copro_bankmap = kzalloc(gpio->chip.ngpio >> 3, GFP_KERNEL);
if (!gpio->cf_copro_bankmap)
return -ENOMEM;
if (offset < 0 || offset > gpio->chip.ngpio)
return -EINVAL;
bindex = offset >> 3;
raw_spin_lock_irqsave(&gpio->lock, flags);
/* Sanity check, this shouldn't happen */
if (gpio->cf_copro_bankmap[bindex] == 0xff) {
rc = -EIO;
goto bail;
}
gpio->cf_copro_bankmap[bindex]++;
/* Switch command source */
if (gpio->cf_copro_bankmap[bindex] == 1)
aspeed_gpio_change_cmd_source(gpio, offset,
GPIO_CMDSRC_COLDFIRE);
if (vreg_offset)
*vreg_offset = bank->val_regs;
if (dreg_offset)
*dreg_offset = bank->rdata_reg;
if (bit)
*bit = GPIO_OFFSET(offset);
bail:
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(aspeed_gpio_copro_grab_gpio);
/**
* aspeed_gpio_copro_release_gpio - Unmark a GPIO used by the coprocessor.
* @desc: The GPIO to be marked
*/
int aspeed_gpio_copro_release_gpio(struct gpio_desc *desc)
{
struct gpio_chip *chip = gpiod_to_chip(desc);
struct aspeed_gpio *gpio = gpiochip_get_data(chip);
int rc = 0, bindex, offset = gpio_chip_hwgpio(desc);
unsigned long flags;
if (!aspeed_gpio_support_copro(gpio))
return -EOPNOTSUPP;
if (!gpio->cf_copro_bankmap)
return -ENXIO;
if (offset < 0 || offset > gpio->chip.ngpio)
return -EINVAL;
bindex = offset >> 3;
raw_spin_lock_irqsave(&gpio->lock, flags);
/* Sanity check, this shouldn't happen */
if (gpio->cf_copro_bankmap[bindex] == 0) {
rc = -EIO;
goto bail;
}
gpio->cf_copro_bankmap[bindex]--;
/* Switch command source */
if (gpio->cf_copro_bankmap[bindex] == 0)
aspeed_gpio_change_cmd_source(gpio, offset,
GPIO_CMDSRC_ARM);
bail:
raw_spin_unlock_irqrestore(&gpio->lock, flags);
return rc;
}
EXPORT_SYMBOL_GPL(aspeed_gpio_copro_release_gpio);
static void aspeed_gpio_irq_print_chip(struct irq_data *d, struct seq_file *p)
{
struct aspeed_gpio *gpio;
int rc, offset;
rc = irqd_to_aspeed_gpio_data(d, &gpio, &offset);
if (rc)
return;
seq_puts(p, dev_name(gpio->dev));
}
static const struct irq_chip aspeed_gpio_irq_chip = {
.irq_ack = aspeed_gpio_irq_ack,
.irq_mask = aspeed_gpio_irq_mask,
.irq_unmask = aspeed_gpio_irq_unmask,
.irq_set_type = aspeed_gpio_set_type,
.irq_print_chip = aspeed_gpio_irq_print_chip,
.flags = IRQCHIP_IMMUTABLE,
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
static void aspeed_g4_reg_bit_set(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg, bool val)
{
const struct aspeed_gpio_bank *bank = to_bank(offset);
void __iomem *addr = aspeed_gpio_g4_bank_reg(gpio, bank, reg);
u32 temp;
if (reg == reg_val)
temp = gpio->dcache[GPIO_BANK(offset)];
else
temp = ioread32(addr);
if (val)
temp |= GPIO_BIT(offset);
else
temp &= ~GPIO_BIT(offset);
if (reg == reg_val)
gpio->dcache[GPIO_BANK(offset)] = temp;
iowrite32(temp, addr);
}
static bool aspeed_g4_reg_bit_get(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg)
{
const struct aspeed_gpio_bank *bank = to_bank(offset);
void __iomem *addr = aspeed_gpio_g4_bank_reg(gpio, bank, reg);
return !!(ioread32(addr) & GPIO_BIT(offset));
}
static int aspeed_g4_reg_bank_get(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg)
{
const struct aspeed_gpio_bank *bank = to_bank(offset);
void __iomem *addr = aspeed_gpio_g4_bank_reg(gpio, bank, reg);
if (reg == reg_rdata || reg == reg_irq_status)
return ioread32(addr);
else
return -EOPNOTSUPP;
}
static void aspeed_g4_privilege_ctrl(struct aspeed_gpio *gpio, unsigned int offset, int cmdsrc)
{
/*
* The command source register is only valid in bits 0, 8, 16, and 24, so we use
* (offset & ~(0x7)) to ensure that reg_bits_set always targets a valid bit.
*/
/* Source 1 first to avoid illegal 11 combination */
aspeed_g4_reg_bit_set(gpio, offset & ~(0x7), reg_cmdsrc1, !!(cmdsrc & BIT(1)));
/* Then Source 0 */
aspeed_g4_reg_bit_set(gpio, offset & ~(0x7), reg_cmdsrc0, !!(cmdsrc & BIT(0)));
}
static void aspeed_g4_privilege_init(struct aspeed_gpio *gpio)
{
u32 i;
/* Switch all command sources to the ARM by default */
for (i = 0; i < DIV_ROUND_UP(gpio->chip.ngpio, 32); i++) {
aspeed_g4_privilege_ctrl(gpio, (i << 5) + 0, GPIO_CMDSRC_ARM);
aspeed_g4_privilege_ctrl(gpio, (i << 5) + 8, GPIO_CMDSRC_ARM);
aspeed_g4_privilege_ctrl(gpio, (i << 5) + 16, GPIO_CMDSRC_ARM);
aspeed_g4_privilege_ctrl(gpio, (i << 5) + 24, GPIO_CMDSRC_ARM);
}
}
static bool aspeed_g4_copro_request(struct aspeed_gpio *gpio, unsigned int offset)
{
if (!copro_ops || !gpio->cf_copro_bankmap)
return false;
if (!gpio->cf_copro_bankmap[offset >> 3])
return false;
if (!copro_ops->request_access)
return false;
/* Pause the coprocessor */
copro_ops->request_access(copro_data);
/* Change command source back to ARM */
aspeed_g4_privilege_ctrl(gpio, offset, GPIO_CMDSRC_ARM);
/* Update cache */
gpio->dcache[GPIO_BANK(offset)] = aspeed_g4_reg_bank_get(gpio, offset, reg_rdata);
return true;
}
static void aspeed_g4_copro_release(struct aspeed_gpio *gpio, unsigned int offset)
{
if (!copro_ops || !gpio->cf_copro_bankmap)
return;
if (!gpio->cf_copro_bankmap[offset >> 3])
return;
if (!copro_ops->release_access)
return;
/* Change command source back to ColdFire */
aspeed_g4_privilege_ctrl(gpio, offset, GPIO_CMDSRC_COLDFIRE);
/* Restart the coprocessor */
copro_ops->release_access(copro_data);
}
static const struct aspeed_gpio_llops aspeed_g4_llops = {
.reg_bit_set = aspeed_g4_reg_bit_set,
.reg_bit_get = aspeed_g4_reg_bit_get,
.reg_bank_get = aspeed_g4_reg_bank_get,
.privilege_ctrl = aspeed_g4_privilege_ctrl,
.privilege_init = aspeed_g4_privilege_init,
.copro_request = aspeed_g4_copro_request,
.copro_release = aspeed_g4_copro_release,
};
static void aspeed_g7_reg_bit_set(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg, bool val)
{
u32 mask = aspeed_gpio_g7_reg_mask(reg);
void __iomem *addr = gpio->base + GPIO_G7_CTRL_REG_OFFSET(offset);
u32 write_val;
if (mask) {
write_val = (ioread32(addr) & ~(mask)) | field_prep(mask, val);
iowrite32(write_val, addr);
}
}
static bool aspeed_g7_reg_bit_get(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg)
{
u32 mask = aspeed_gpio_g7_reg_mask(reg);
void __iomem *addr;
addr = gpio->base + GPIO_G7_CTRL_REG_OFFSET(offset);
if (reg == reg_val)
mask = GPIO_G7_CTRL_IN_DATA;
if (mask)
return field_get(mask, ioread32(addr));
else
return 0;
}
static int aspeed_g7_reg_bank_get(struct aspeed_gpio *gpio, unsigned int offset,
const enum aspeed_gpio_reg reg)
{
void __iomem *addr;
if (reg == reg_irq_status) {
addr = gpio->base + GPIO_G7_IRQ_STS_OFFSET(offset >> 5);
return ioread32(addr);
} else {
return -EOPNOTSUPP;
}
}
static const struct aspeed_gpio_llops aspeed_g7_llops = {
.reg_bit_set = aspeed_g7_reg_bit_set,
.reg_bit_get = aspeed_g7_reg_bit_get,
.reg_bank_get = aspeed_g7_reg_bank_get,
.privilege_ctrl = NULL,
.privilege_init = NULL,
.copro_request = NULL,
.copro_release = NULL,
};
/*
* Any banks not specified in a struct aspeed_bank_props array are assumed to
* have the properties:
*
* { .input = 0xffffffff, .output = 0xffffffff }
*/
static const struct aspeed_bank_props ast2400_bank_props[] = {
/* input output */
{ 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
{ 6, 0x0000000f, 0x0fffff0f }, /* Y/Z/AA/AB, two 4-GPIO holes */
{ },
};
static const struct aspeed_gpio_config ast2400_config =
/* 220 for simplicity, really 216 with two 4-GPIO holes, four at end */
{
.nr_gpios = 220,
.props = ast2400_bank_props,
.llops = &aspeed_g4_llops,
.debounce_timers_array = debounce_timers,
.debounce_timers_num = ARRAY_SIZE(debounce_timers),
.require_dcache = true,
};
static const struct aspeed_bank_props ast2500_bank_props[] = {
/* input output */
{ 5, 0xffffffff, 0x0000ffff }, /* U/V/W/X */
{ 6, 0x0fffffff, 0x0fffffff }, /* Y/Z/AA/AB, 4-GPIO hole */
{ 7, 0x000000ff, 0x000000ff }, /* AC */
{ },
};
static const struct aspeed_gpio_config ast2500_config =
/* 232 for simplicity, actual number is 228 (4-GPIO hole in GPIOAB) */
{
.nr_gpios = 232,
.props = ast2500_bank_props,
.llops = &aspeed_g4_llops,
.debounce_timers_array = debounce_timers,
.debounce_timers_num = ARRAY_SIZE(debounce_timers),
.require_dcache = true,
};
static const struct aspeed_bank_props ast2600_bank_props[] = {
/* input output */
{4, 0xffffffff, 0x00ffffff}, /* Q/R/S/T */
{5, 0xffffffff, 0xffffff00}, /* U/V/W/X */
{6, 0x0000ffff, 0x0000ffff}, /* Y/Z */
{ },
};
static const struct aspeed_gpio_config ast2600_config =
/*
* ast2600 has two controllers one with 208 GPIOs and one with 36 GPIOs.
* We expect ngpio being set in the device tree and this is a fallback
* option.
*/
{
.nr_gpios = 208,
.props = ast2600_bank_props,
.llops = &aspeed_g4_llops,
.debounce_timers_array = debounce_timers,
.debounce_timers_num = ARRAY_SIZE(debounce_timers),
.require_dcache = true,
};
static const struct aspeed_bank_props ast2700_bank_props[] = {
/* input output */
{ 1, 0x0fffffff, 0x0fffffff }, /* E/F/G/H, 4-GPIO hole */
{ 6, 0x00ffffff, 0x00ff0000 }, /* Y/Z/AA */
{},
};
static const struct aspeed_gpio_config ast2700_config =
/*
* ast2700 has two controllers one with 212 GPIOs and one with 16 GPIOs.
* 216 for simplicity, actual number is 212 (4-GPIO hole in GPIOH)
* We expect ngpio being set in the device tree and this is a fallback
* option.
*/
{
.nr_gpios = 216,
.props = ast2700_bank_props,
.llops = &aspeed_g7_llops,
.debounce_timers_array = g7_debounce_timers,
.debounce_timers_num = ARRAY_SIZE(g7_debounce_timers),
.require_dcache = false,
};
static const struct of_device_id aspeed_gpio_of_table[] = {
{ .compatible = "aspeed,ast2400-gpio", .data = &ast2400_config, },
{ .compatible = "aspeed,ast2500-gpio", .data = &ast2500_config, },
{ .compatible = "aspeed,ast2600-gpio", .data = &ast2600_config, },
{ .compatible = "aspeed,ast2700-gpio", .data = &ast2700_config, },
{}
};
MODULE_DEVICE_TABLE(of, aspeed_gpio_of_table);
static int aspeed_gpio_probe(struct platform_device *pdev)
{
const struct of_device_id *gpio_id;
struct gpio_irq_chip *girq;
struct aspeed_gpio *gpio;
int rc, irq, i, banks, err;
u32 ngpio;
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
if (!gpio)
return -ENOMEM;
gpio->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(gpio->base))
return PTR_ERR(gpio->base);
gpio->dev = &pdev->dev;
raw_spin_lock_init(&gpio->lock);
gpio_id = of_match_node(aspeed_gpio_of_table, pdev->dev.of_node);
if (!gpio_id)
return -EINVAL;
gpio->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(gpio->clk)) {
dev_warn(&pdev->dev,
"Failed to get clock from devicetree, debouncing disabled\n");
gpio->clk = NULL;
}
gpio->config = gpio_id->data;
if (!gpio->config->llops->reg_bit_set || !gpio->config->llops->reg_bit_get ||
!gpio->config->llops->reg_bank_get)
return -EINVAL;
gpio->chip.parent = &pdev->dev;
err = of_property_read_u32(pdev->dev.of_node, "ngpios", &ngpio);
gpio->chip.ngpio = (u16) ngpio;
if (err)
gpio->chip.ngpio = gpio->config->nr_gpios;
gpio->chip.direction_input = aspeed_gpio_dir_in;
gpio->chip.direction_output = aspeed_gpio_dir_out;
gpio->chip.get_direction = aspeed_gpio_get_direction;
gpio->chip.request = aspeed_gpio_request;
gpio->chip.free = aspeed_gpio_free;
gpio->chip.get = aspeed_gpio_get;
gpio->chip.set = aspeed_gpio_set;
gpio->chip.set_config = aspeed_gpio_set_config;
gpio->chip.label = dev_name(&pdev->dev);
gpio->chip.base = -1;
if (gpio->config->require_dcache) {
/* Allocate a cache of the output registers */
banks = DIV_ROUND_UP(gpio->chip.ngpio, 32);
gpio->dcache = devm_kcalloc(&pdev->dev, banks, sizeof(u32), GFP_KERNEL);
if (!gpio->dcache)
return -ENOMEM;
/*
* Populate it with initial values read from the HW
*/
for (i = 0; i < banks; i++)
gpio->dcache[i] =
gpio->config->llops->reg_bank_get(gpio, (i << 5), reg_rdata);
}
if (gpio->config->llops->privilege_init)
gpio->config->llops->privilege_init(gpio);
/* Set up an irqchip */
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
gpio->irq = irq;
girq = &gpio->chip.irq;
gpio_irq_chip_set_chip(girq, &aspeed_gpio_irq_chip);
girq->parent_handler = aspeed_gpio_irq_handler;
girq->num_parents = 1;
girq->parents = devm_kcalloc(&pdev->dev, 1, sizeof(*girq->parents), GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
girq->parents[0] = gpio->irq;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
girq->init_valid_mask = aspeed_init_irq_valid_mask;
gpio->offset_timer =
devm_kzalloc(&pdev->dev, gpio->chip.ngpio, GFP_KERNEL);
if (!gpio->offset_timer)
return -ENOMEM;
rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
if (rc < 0)
return rc;
return 0;
}
static struct platform_driver aspeed_gpio_driver = {
.probe = aspeed_gpio_probe,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = aspeed_gpio_of_table,
},
};
module_platform_driver(aspeed_gpio_driver);
MODULE_DESCRIPTION("Aspeed GPIO Driver");
MODULE_LICENSE("GPL");