mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-28 16:56:26 +00:00
bc7acc0bd0
commit7f00be96f1
("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)") started adding device links for the interrupt-parent property. commit4104ca776b
("of: property: Add fw_devlink support for interrupts") and commitf265f06af1
("of: property: Fix fw_devlink handling of interrupts/interrupts-extended") later added full support for parsing the interrupts and interrupts-extended properties, which includes looking up the node of the parent domain. This made the handler for the interrupt-parent property redundant. In fact, creating device links based solely on interrupt-parent is problematic, because it can create spurious cycles. A node may have this property without itself being an interrupt controller or consumer. For example, this property is often present in the root node or a /soc bus node to set the default interrupt parent for child nodes. However, it is incorrect for the bus to depend on the interrupt controller, as some of the bus's children may not be interrupt consumers at all or may have a different interrupt parent. Resolving these spurious dependency cycles can cause an incorrect probe order for interrupt controller drivers. This was observed on a RISC-V system with both an APLIC and IMSIC under /soc, where interrupt-parent in /soc points to the APLIC, and the APLIC msi-parent points to the IMSIC. fw_devlink found three dependency cycles and attempted to probe the APLIC before the IMSIC. After applying this patch, there were no dependency cycles and the probe order was correct. Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Fixes:4104ca776b
("of: property: Add fw_devlink support for interrupts") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Link: https://lore.kernel.org/r/20241120233124.3649382-1-samuel.holland@sifive.com Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
1580 lines
46 KiB
C
1580 lines
46 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* drivers/of/property.c - Procedures for accessing and interpreting
|
|
* Devicetree properties and graphs.
|
|
*
|
|
* Initially created by copying procedures from drivers/of/base.c. This
|
|
* file contains the OF property as well as the OF graph interface
|
|
* functions.
|
|
*
|
|
* Paul Mackerras August 1996.
|
|
* Copyright (C) 1996-2005 Paul Mackerras.
|
|
*
|
|
* Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
|
|
* {engebret|bergner}@us.ibm.com
|
|
*
|
|
* Adapted for sparc and sparc64 by David S. Miller davem@davemloft.net
|
|
*
|
|
* Reconsolidated from arch/x/kernel/prom.c by Stephen Rothwell and
|
|
* Grant Likely.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "OF: " fmt
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/string.h>
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include "of_private.h"
|
|
|
|
/**
|
|
* of_graph_is_present() - check graph's presence
|
|
* @node: pointer to device_node containing graph port
|
|
*
|
|
* Return: True if @node has a port or ports (with a port) sub-node,
|
|
* false otherwise.
|
|
*/
|
|
bool of_graph_is_present(const struct device_node *node)
|
|
{
|
|
struct device_node *ports __free(device_node) = of_get_child_by_name(node, "ports");
|
|
|
|
if (ports)
|
|
node = ports;
|
|
|
|
struct device_node *port __free(device_node) = of_get_child_by_name(node, "port");
|
|
|
|
return !!port;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_is_present);
|
|
|
|
/**
|
|
* of_property_count_elems_of_size - Count the number of elements in a property
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @elem_size: size of the individual element
|
|
*
|
|
* Search for a property in a device node and count the number of elements of
|
|
* size elem_size in it.
|
|
*
|
|
* Return: The number of elements on sucess, -EINVAL if the property does not
|
|
* exist or its length does not match a multiple of elem_size and -ENODATA if
|
|
* the property does not have a value.
|
|
*/
|
|
int of_property_count_elems_of_size(const struct device_node *np,
|
|
const char *propname, int elem_size)
|
|
{
|
|
const struct property *prop = of_find_property(np, propname, NULL);
|
|
|
|
if (!prop)
|
|
return -EINVAL;
|
|
if (!prop->value)
|
|
return -ENODATA;
|
|
|
|
if (prop->length % elem_size != 0) {
|
|
pr_err("size of %s in node %pOF is not a multiple of %d\n",
|
|
propname, np, elem_size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return prop->length / elem_size;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_count_elems_of_size);
|
|
|
|
/**
|
|
* of_find_property_value_of_size
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @min: minimum allowed length of property value
|
|
* @max: maximum allowed length of property value (0 means unlimited)
|
|
* @len: if !=NULL, actual length is written to here
|
|
*
|
|
* Search for a property in a device node and valid the requested size.
|
|
*
|
|
* Return: The property value on success, -EINVAL if the property does not
|
|
* exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
|
|
* property data is too small or too large.
|
|
*
|
|
*/
|
|
static void *of_find_property_value_of_size(const struct device_node *np,
|
|
const char *propname, u32 min, u32 max, size_t *len)
|
|
{
|
|
const struct property *prop = of_find_property(np, propname, NULL);
|
|
|
|
if (!prop)
|
|
return ERR_PTR(-EINVAL);
|
|
if (!prop->value)
|
|
return ERR_PTR(-ENODATA);
|
|
if (prop->length < min)
|
|
return ERR_PTR(-EOVERFLOW);
|
|
if (max && prop->length > max)
|
|
return ERR_PTR(-EOVERFLOW);
|
|
|
|
if (len)
|
|
*len = prop->length;
|
|
|
|
return prop->value;
|
|
}
|
|
|
|
/**
|
|
* of_property_read_u32_index - Find and read a u32 from a multi-value property.
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @index: index of the u32 in the list of values
|
|
* @out_value: pointer to return value, modified only if no error.
|
|
*
|
|
* Search for a property in a device node and read nth 32-bit value from
|
|
* it.
|
|
*
|
|
* Return: 0 on success, -EINVAL if the property does not exist,
|
|
* -ENODATA if property does not have a value, and -EOVERFLOW if the
|
|
* property data isn't large enough.
|
|
*
|
|
* The out_value is modified only if a valid u32 value can be decoded.
|
|
*/
|
|
int of_property_read_u32_index(const struct device_node *np,
|
|
const char *propname,
|
|
u32 index, u32 *out_value)
|
|
{
|
|
const u32 *val = of_find_property_value_of_size(np, propname,
|
|
((index + 1) * sizeof(*out_value)),
|
|
0,
|
|
NULL);
|
|
|
|
if (IS_ERR(val))
|
|
return PTR_ERR(val);
|
|
|
|
*out_value = be32_to_cpup(((__be32 *)val) + index);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_u32_index);
|
|
|
|
/**
|
|
* of_property_read_u64_index - Find and read a u64 from a multi-value property.
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @index: index of the u64 in the list of values
|
|
* @out_value: pointer to return value, modified only if no error.
|
|
*
|
|
* Search for a property in a device node and read nth 64-bit value from
|
|
* it.
|
|
*
|
|
* Return: 0 on success, -EINVAL if the property does not exist,
|
|
* -ENODATA if property does not have a value, and -EOVERFLOW if the
|
|
* property data isn't large enough.
|
|
*
|
|
* The out_value is modified only if a valid u64 value can be decoded.
|
|
*/
|
|
int of_property_read_u64_index(const struct device_node *np,
|
|
const char *propname,
|
|
u32 index, u64 *out_value)
|
|
{
|
|
const u64 *val = of_find_property_value_of_size(np, propname,
|
|
((index + 1) * sizeof(*out_value)),
|
|
0, NULL);
|
|
|
|
if (IS_ERR(val))
|
|
return PTR_ERR(val);
|
|
|
|
*out_value = be64_to_cpup(((__be64 *)val) + index);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_u64_index);
|
|
|
|
/**
|
|
* of_property_read_variable_u8_array - Find and read an array of u8 from a
|
|
* property, with bounds on the minimum and maximum array size.
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @out_values: pointer to found values.
|
|
* @sz_min: minimum number of array elements to read
|
|
* @sz_max: maximum number of array elements to read, if zero there is no
|
|
* upper limit on the number of elements in the dts entry but only
|
|
* sz_min will be read.
|
|
*
|
|
* Search for a property in a device node and read 8-bit value(s) from
|
|
* it.
|
|
*
|
|
* dts entry of array should be like:
|
|
* ``property = /bits/ 8 <0x50 0x60 0x70>;``
|
|
*
|
|
* Return: The number of elements read on success, -EINVAL if the property
|
|
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
|
|
* if the property data is smaller than sz_min or longer than sz_max.
|
|
*
|
|
* The out_values is modified only if a valid u8 value can be decoded.
|
|
*/
|
|
int of_property_read_variable_u8_array(const struct device_node *np,
|
|
const char *propname, u8 *out_values,
|
|
size_t sz_min, size_t sz_max)
|
|
{
|
|
size_t sz, count;
|
|
const u8 *val = of_find_property_value_of_size(np, propname,
|
|
(sz_min * sizeof(*out_values)),
|
|
(sz_max * sizeof(*out_values)),
|
|
&sz);
|
|
|
|
if (IS_ERR(val))
|
|
return PTR_ERR(val);
|
|
|
|
if (!sz_max)
|
|
sz = sz_min;
|
|
else
|
|
sz /= sizeof(*out_values);
|
|
|
|
count = sz;
|
|
while (count--)
|
|
*out_values++ = *val++;
|
|
|
|
return sz;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_variable_u8_array);
|
|
|
|
/**
|
|
* of_property_read_variable_u16_array - Find and read an array of u16 from a
|
|
* property, with bounds on the minimum and maximum array size.
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @out_values: pointer to found values.
|
|
* @sz_min: minimum number of array elements to read
|
|
* @sz_max: maximum number of array elements to read, if zero there is no
|
|
* upper limit on the number of elements in the dts entry but only
|
|
* sz_min will be read.
|
|
*
|
|
* Search for a property in a device node and read 16-bit value(s) from
|
|
* it.
|
|
*
|
|
* dts entry of array should be like:
|
|
* ``property = /bits/ 16 <0x5000 0x6000 0x7000>;``
|
|
*
|
|
* Return: The number of elements read on success, -EINVAL if the property
|
|
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
|
|
* if the property data is smaller than sz_min or longer than sz_max.
|
|
*
|
|
* The out_values is modified only if a valid u16 value can be decoded.
|
|
*/
|
|
int of_property_read_variable_u16_array(const struct device_node *np,
|
|
const char *propname, u16 *out_values,
|
|
size_t sz_min, size_t sz_max)
|
|
{
|
|
size_t sz, count;
|
|
const __be16 *val = of_find_property_value_of_size(np, propname,
|
|
(sz_min * sizeof(*out_values)),
|
|
(sz_max * sizeof(*out_values)),
|
|
&sz);
|
|
|
|
if (IS_ERR(val))
|
|
return PTR_ERR(val);
|
|
|
|
if (!sz_max)
|
|
sz = sz_min;
|
|
else
|
|
sz /= sizeof(*out_values);
|
|
|
|
count = sz;
|
|
while (count--)
|
|
*out_values++ = be16_to_cpup(val++);
|
|
|
|
return sz;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_variable_u16_array);
|
|
|
|
/**
|
|
* of_property_read_variable_u32_array - Find and read an array of 32 bit
|
|
* integers from a property, with bounds on the minimum and maximum array size.
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @out_values: pointer to return found values.
|
|
* @sz_min: minimum number of array elements to read
|
|
* @sz_max: maximum number of array elements to read, if zero there is no
|
|
* upper limit on the number of elements in the dts entry but only
|
|
* sz_min will be read.
|
|
*
|
|
* Search for a property in a device node and read 32-bit value(s) from
|
|
* it.
|
|
*
|
|
* Return: The number of elements read on success, -EINVAL if the property
|
|
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
|
|
* if the property data is smaller than sz_min or longer than sz_max.
|
|
*
|
|
* The out_values is modified only if a valid u32 value can be decoded.
|
|
*/
|
|
int of_property_read_variable_u32_array(const struct device_node *np,
|
|
const char *propname, u32 *out_values,
|
|
size_t sz_min, size_t sz_max)
|
|
{
|
|
size_t sz, count;
|
|
const __be32 *val = of_find_property_value_of_size(np, propname,
|
|
(sz_min * sizeof(*out_values)),
|
|
(sz_max * sizeof(*out_values)),
|
|
&sz);
|
|
|
|
if (IS_ERR(val))
|
|
return PTR_ERR(val);
|
|
|
|
if (!sz_max)
|
|
sz = sz_min;
|
|
else
|
|
sz /= sizeof(*out_values);
|
|
|
|
count = sz;
|
|
while (count--)
|
|
*out_values++ = be32_to_cpup(val++);
|
|
|
|
return sz;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_variable_u32_array);
|
|
|
|
/**
|
|
* of_property_read_u64 - Find and read a 64 bit integer from a property
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @out_value: pointer to return value, modified only if return value is 0.
|
|
*
|
|
* Search for a property in a device node and read a 64-bit value from
|
|
* it.
|
|
*
|
|
* Return: 0 on success, -EINVAL if the property does not exist,
|
|
* -ENODATA if property does not have a value, and -EOVERFLOW if the
|
|
* property data isn't large enough.
|
|
*
|
|
* The out_value is modified only if a valid u64 value can be decoded.
|
|
*/
|
|
int of_property_read_u64(const struct device_node *np, const char *propname,
|
|
u64 *out_value)
|
|
{
|
|
const __be32 *val = of_find_property_value_of_size(np, propname,
|
|
sizeof(*out_value),
|
|
0,
|
|
NULL);
|
|
|
|
if (IS_ERR(val))
|
|
return PTR_ERR(val);
|
|
|
|
*out_value = of_read_number(val, 2);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_u64);
|
|
|
|
/**
|
|
* of_property_read_variable_u64_array - Find and read an array of 64 bit
|
|
* integers from a property, with bounds on the minimum and maximum array size.
|
|
*
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @out_values: pointer to found values.
|
|
* @sz_min: minimum number of array elements to read
|
|
* @sz_max: maximum number of array elements to read, if zero there is no
|
|
* upper limit on the number of elements in the dts entry but only
|
|
* sz_min will be read.
|
|
*
|
|
* Search for a property in a device node and read 64-bit value(s) from
|
|
* it.
|
|
*
|
|
* Return: The number of elements read on success, -EINVAL if the property
|
|
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
|
|
* if the property data is smaller than sz_min or longer than sz_max.
|
|
*
|
|
* The out_values is modified only if a valid u64 value can be decoded.
|
|
*/
|
|
int of_property_read_variable_u64_array(const struct device_node *np,
|
|
const char *propname, u64 *out_values,
|
|
size_t sz_min, size_t sz_max)
|
|
{
|
|
size_t sz, count;
|
|
const __be32 *val = of_find_property_value_of_size(np, propname,
|
|
(sz_min * sizeof(*out_values)),
|
|
(sz_max * sizeof(*out_values)),
|
|
&sz);
|
|
|
|
if (IS_ERR(val))
|
|
return PTR_ERR(val);
|
|
|
|
if (!sz_max)
|
|
sz = sz_min;
|
|
else
|
|
sz /= sizeof(*out_values);
|
|
|
|
count = sz;
|
|
while (count--) {
|
|
*out_values++ = of_read_number(val, 2);
|
|
val += 2;
|
|
}
|
|
|
|
return sz;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_variable_u64_array);
|
|
|
|
/**
|
|
* of_property_read_string - Find and read a string from a property
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @out_string: pointer to null terminated return string, modified only if
|
|
* return value is 0.
|
|
*
|
|
* Search for a property in a device tree node and retrieve a null
|
|
* terminated string value (pointer to data, not a copy).
|
|
*
|
|
* Return: 0 on success, -EINVAL if the property does not exist, -ENODATA if
|
|
* property does not have a value, and -EILSEQ if the string is not
|
|
* null-terminated within the length of the property data.
|
|
*
|
|
* Note that the empty string "" has length of 1, thus -ENODATA cannot
|
|
* be interpreted as an empty string.
|
|
*
|
|
* The out_string pointer is modified only if a valid string can be decoded.
|
|
*/
|
|
int of_property_read_string(const struct device_node *np, const char *propname,
|
|
const char **out_string)
|
|
{
|
|
const struct property *prop = of_find_property(np, propname, NULL);
|
|
|
|
if (!prop)
|
|
return -EINVAL;
|
|
if (!prop->length)
|
|
return -ENODATA;
|
|
if (strnlen(prop->value, prop->length) >= prop->length)
|
|
return -EILSEQ;
|
|
*out_string = prop->value;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_string);
|
|
|
|
/**
|
|
* of_property_match_string() - Find string in a list and return index
|
|
* @np: pointer to the node containing the string list property
|
|
* @propname: string list property name
|
|
* @string: pointer to the string to search for in the string list
|
|
*
|
|
* Search for an exact match of string in a device node property which is a
|
|
* string of lists.
|
|
*
|
|
* Return: the index of the first occurrence of the string on success, -EINVAL
|
|
* if the property does not exist, -ENODATA if the property does not have a
|
|
* value, and -EILSEQ if the string is not null-terminated within the length of
|
|
* the property data.
|
|
*/
|
|
int of_property_match_string(const struct device_node *np, const char *propname,
|
|
const char *string)
|
|
{
|
|
const struct property *prop = of_find_property(np, propname, NULL);
|
|
size_t l;
|
|
int i;
|
|
const char *p, *end;
|
|
|
|
if (!prop)
|
|
return -EINVAL;
|
|
if (!prop->value)
|
|
return -ENODATA;
|
|
|
|
p = prop->value;
|
|
end = p + prop->length;
|
|
|
|
for (i = 0; p < end; i++, p += l) {
|
|
l = strnlen(p, end - p) + 1;
|
|
if (p + l > end)
|
|
return -EILSEQ;
|
|
pr_debug("comparing %s with %s\n", string, p);
|
|
if (strcmp(string, p) == 0)
|
|
return i; /* Found it; return index */
|
|
}
|
|
return -ENODATA;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_match_string);
|
|
|
|
/**
|
|
* of_property_read_string_helper() - Utility helper for parsing string properties
|
|
* @np: device node from which the property value is to be read.
|
|
* @propname: name of the property to be searched.
|
|
* @out_strs: output array of string pointers.
|
|
* @sz: number of array elements to read.
|
|
* @skip: Number of strings to skip over at beginning of list.
|
|
*
|
|
* Don't call this function directly. It is a utility helper for the
|
|
* of_property_read_string*() family of functions.
|
|
*/
|
|
int of_property_read_string_helper(const struct device_node *np,
|
|
const char *propname, const char **out_strs,
|
|
size_t sz, int skip)
|
|
{
|
|
const struct property *prop = of_find_property(np, propname, NULL);
|
|
int l = 0, i = 0;
|
|
const char *p, *end;
|
|
|
|
if (!prop)
|
|
return -EINVAL;
|
|
if (!prop->value)
|
|
return -ENODATA;
|
|
p = prop->value;
|
|
end = p + prop->length;
|
|
|
|
for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) {
|
|
l = strnlen(p, end - p) + 1;
|
|
if (p + l > end)
|
|
return -EILSEQ;
|
|
if (out_strs && i >= skip)
|
|
*out_strs++ = p;
|
|
}
|
|
i -= skip;
|
|
return i <= 0 ? -ENODATA : i;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_property_read_string_helper);
|
|
|
|
const __be32 *of_prop_next_u32(const struct property *prop, const __be32 *cur,
|
|
u32 *pu)
|
|
{
|
|
const void *curv = cur;
|
|
|
|
if (!prop)
|
|
return NULL;
|
|
|
|
if (!cur) {
|
|
curv = prop->value;
|
|
goto out_val;
|
|
}
|
|
|
|
curv += sizeof(*cur);
|
|
if (curv >= prop->value + prop->length)
|
|
return NULL;
|
|
|
|
out_val:
|
|
*pu = be32_to_cpup(curv);
|
|
return curv;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_prop_next_u32);
|
|
|
|
const char *of_prop_next_string(const struct property *prop, const char *cur)
|
|
{
|
|
const void *curv = cur;
|
|
|
|
if (!prop)
|
|
return NULL;
|
|
|
|
if (!cur)
|
|
return prop->value;
|
|
|
|
curv += strlen(cur) + 1;
|
|
if (curv >= prop->value + prop->length)
|
|
return NULL;
|
|
|
|
return curv;
|
|
}
|
|
EXPORT_SYMBOL_GPL(of_prop_next_string);
|
|
|
|
/**
|
|
* of_graph_parse_endpoint() - parse common endpoint node properties
|
|
* @node: pointer to endpoint device_node
|
|
* @endpoint: pointer to the OF endpoint data structure
|
|
*
|
|
* The caller should hold a reference to @node.
|
|
*/
|
|
int of_graph_parse_endpoint(const struct device_node *node,
|
|
struct of_endpoint *endpoint)
|
|
{
|
|
struct device_node *port_node __free(device_node) =
|
|
of_get_parent(node);
|
|
|
|
WARN_ONCE(!port_node, "%s(): endpoint %pOF has no parent node\n",
|
|
__func__, node);
|
|
|
|
memset(endpoint, 0, sizeof(*endpoint));
|
|
|
|
endpoint->local_node = node;
|
|
/*
|
|
* It doesn't matter whether the two calls below succeed.
|
|
* If they don't then the default value 0 is used.
|
|
*/
|
|
of_property_read_u32(port_node, "reg", &endpoint->port);
|
|
of_property_read_u32(node, "reg", &endpoint->id);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_parse_endpoint);
|
|
|
|
/**
|
|
* of_graph_get_port_by_id() - get the port matching a given id
|
|
* @parent: pointer to the parent device node
|
|
* @id: id of the port
|
|
*
|
|
* Return: A 'port' node pointer with refcount incremented. The caller
|
|
* has to use of_node_put() on it when done.
|
|
*/
|
|
struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id)
|
|
{
|
|
struct device_node *node __free(device_node) = of_get_child_by_name(parent, "ports");
|
|
|
|
if (node)
|
|
parent = node;
|
|
|
|
for_each_child_of_node_scoped(parent, port) {
|
|
u32 port_id = 0;
|
|
|
|
if (!of_node_name_eq(port, "port"))
|
|
continue;
|
|
of_property_read_u32(port, "reg", &port_id);
|
|
if (id == port_id)
|
|
return_ptr(port);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_port_by_id);
|
|
|
|
/**
|
|
* of_graph_get_next_port() - get next port node.
|
|
* @parent: pointer to the parent device node, or parent ports node
|
|
* @prev: previous port node, or NULL to get first
|
|
*
|
|
* Parent device node can be used as @parent whether device node has ports node
|
|
* or not. It will work same as ports@0 node.
|
|
*
|
|
* Return: A 'port' node pointer with refcount incremented. Refcount
|
|
* of the passed @prev node is decremented.
|
|
*/
|
|
struct device_node *of_graph_get_next_port(const struct device_node *parent,
|
|
struct device_node *prev)
|
|
{
|
|
if (!parent)
|
|
return NULL;
|
|
|
|
if (!prev) {
|
|
struct device_node *node __free(device_node) =
|
|
of_get_child_by_name(parent, "ports");
|
|
|
|
if (node)
|
|
parent = node;
|
|
|
|
return of_get_child_by_name(parent, "port");
|
|
}
|
|
|
|
do {
|
|
prev = of_get_next_child(parent, prev);
|
|
if (!prev)
|
|
break;
|
|
} while (!of_node_name_eq(prev, "port"));
|
|
|
|
return prev;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_next_port);
|
|
|
|
/**
|
|
* of_graph_get_next_port_endpoint() - get next endpoint node in port.
|
|
* If it reached to end of the port, it will return NULL.
|
|
* @port: pointer to the target port node
|
|
* @prev: previous endpoint node, or NULL to get first
|
|
*
|
|
* Return: An 'endpoint' node pointer with refcount incremented. Refcount
|
|
* of the passed @prev node is decremented.
|
|
*/
|
|
struct device_node *of_graph_get_next_port_endpoint(const struct device_node *port,
|
|
struct device_node *prev)
|
|
{
|
|
while (1) {
|
|
prev = of_get_next_child(port, prev);
|
|
if (!prev)
|
|
break;
|
|
if (WARN(!of_node_name_eq(prev, "endpoint"),
|
|
"non endpoint node is used (%pOF)", prev))
|
|
continue;
|
|
|
|
break;
|
|
}
|
|
|
|
return prev;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_next_port_endpoint);
|
|
|
|
/**
|
|
* of_graph_get_next_endpoint() - get next endpoint node
|
|
* @parent: pointer to the parent device node
|
|
* @prev: previous endpoint node, or NULL to get first
|
|
*
|
|
* Return: An 'endpoint' node pointer with refcount incremented. Refcount
|
|
* of the passed @prev node is decremented.
|
|
*/
|
|
struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
|
|
struct device_node *prev)
|
|
{
|
|
struct device_node *endpoint;
|
|
struct device_node *port;
|
|
|
|
if (!parent)
|
|
return NULL;
|
|
|
|
/*
|
|
* Start by locating the port node. If no previous endpoint is specified
|
|
* search for the first port node, otherwise get the previous endpoint
|
|
* parent port node.
|
|
*/
|
|
if (!prev) {
|
|
port = of_graph_get_next_port(parent, NULL);
|
|
if (!port) {
|
|
pr_debug("graph: no port node found in %pOF\n", parent);
|
|
return NULL;
|
|
}
|
|
} else {
|
|
port = of_get_parent(prev);
|
|
if (WARN_ONCE(!port, "%s(): endpoint %pOF has no parent node\n",
|
|
__func__, prev))
|
|
return NULL;
|
|
}
|
|
|
|
while (1) {
|
|
/*
|
|
* Now that we have a port node, get the next endpoint by
|
|
* getting the next child. If the previous endpoint is NULL this
|
|
* will return the first child.
|
|
*/
|
|
endpoint = of_graph_get_next_port_endpoint(port, prev);
|
|
if (endpoint) {
|
|
of_node_put(port);
|
|
return endpoint;
|
|
}
|
|
|
|
/* No more endpoints under this port, try the next one. */
|
|
prev = NULL;
|
|
|
|
port = of_graph_get_next_port(parent, port);
|
|
if (!port)
|
|
return NULL;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_next_endpoint);
|
|
|
|
/**
|
|
* of_graph_get_endpoint_by_regs() - get endpoint node of specific identifiers
|
|
* @parent: pointer to the parent device node
|
|
* @port_reg: identifier (value of reg property) of the parent port node
|
|
* @reg: identifier (value of reg property) of the endpoint node
|
|
*
|
|
* Return: An 'endpoint' node pointer which is identified by reg and at the same
|
|
* is the child of a port node identified by port_reg. reg and port_reg are
|
|
* ignored when they are -1. Use of_node_put() on the pointer when done.
|
|
*/
|
|
struct device_node *of_graph_get_endpoint_by_regs(
|
|
const struct device_node *parent, int port_reg, int reg)
|
|
{
|
|
struct of_endpoint endpoint;
|
|
struct device_node *node = NULL;
|
|
|
|
for_each_endpoint_of_node(parent, node) {
|
|
of_graph_parse_endpoint(node, &endpoint);
|
|
if (((port_reg == -1) || (endpoint.port == port_reg)) &&
|
|
((reg == -1) || (endpoint.id == reg)))
|
|
return node;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_endpoint_by_regs);
|
|
|
|
/**
|
|
* of_graph_get_remote_endpoint() - get remote endpoint node
|
|
* @node: pointer to a local endpoint device_node
|
|
*
|
|
* Return: Remote endpoint node associated with remote endpoint node linked
|
|
* to @node. Use of_node_put() on it when done.
|
|
*/
|
|
struct device_node *of_graph_get_remote_endpoint(const struct device_node *node)
|
|
{
|
|
/* Get remote endpoint node. */
|
|
return of_parse_phandle(node, "remote-endpoint", 0);
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_remote_endpoint);
|
|
|
|
/**
|
|
* of_graph_get_port_parent() - get port's parent node
|
|
* @node: pointer to a local endpoint device_node
|
|
*
|
|
* Return: device node associated with endpoint node linked
|
|
* to @node. Use of_node_put() on it when done.
|
|
*/
|
|
struct device_node *of_graph_get_port_parent(struct device_node *node)
|
|
{
|
|
unsigned int depth;
|
|
|
|
if (!node)
|
|
return NULL;
|
|
|
|
/*
|
|
* Preserve usecount for passed in node as of_get_next_parent()
|
|
* will do of_node_put() on it.
|
|
*/
|
|
of_node_get(node);
|
|
|
|
/* Walk 3 levels up only if there is 'ports' node. */
|
|
for (depth = 3; depth && node; depth--) {
|
|
node = of_get_next_parent(node);
|
|
if (depth == 2 && !of_node_name_eq(node, "ports") &&
|
|
!of_node_name_eq(node, "in-ports") &&
|
|
!of_node_name_eq(node, "out-ports"))
|
|
break;
|
|
}
|
|
return node;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_port_parent);
|
|
|
|
/**
|
|
* of_graph_get_remote_port_parent() - get remote port's parent node
|
|
* @node: pointer to a local endpoint device_node
|
|
*
|
|
* Return: Remote device node associated with remote endpoint node linked
|
|
* to @node. Use of_node_put() on it when done.
|
|
*/
|
|
struct device_node *of_graph_get_remote_port_parent(
|
|
const struct device_node *node)
|
|
{
|
|
/* Get remote endpoint node. */
|
|
struct device_node *np __free(device_node) =
|
|
of_graph_get_remote_endpoint(node);
|
|
|
|
return of_graph_get_port_parent(np);
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_remote_port_parent);
|
|
|
|
/**
|
|
* of_graph_get_remote_port() - get remote port node
|
|
* @node: pointer to a local endpoint device_node
|
|
*
|
|
* Return: Remote port node associated with remote endpoint node linked
|
|
* to @node. Use of_node_put() on it when done.
|
|
*/
|
|
struct device_node *of_graph_get_remote_port(const struct device_node *node)
|
|
{
|
|
struct device_node *np;
|
|
|
|
/* Get remote endpoint node. */
|
|
np = of_graph_get_remote_endpoint(node);
|
|
if (!np)
|
|
return NULL;
|
|
return of_get_next_parent(np);
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_remote_port);
|
|
|
|
/**
|
|
* of_graph_get_endpoint_count() - get the number of endpoints in a device node
|
|
* @np: parent device node containing ports and endpoints
|
|
*
|
|
* Return: count of endpoint of this device node
|
|
*/
|
|
unsigned int of_graph_get_endpoint_count(const struct device_node *np)
|
|
{
|
|
struct device_node *endpoint;
|
|
unsigned int num = 0;
|
|
|
|
for_each_endpoint_of_node(np, endpoint)
|
|
num++;
|
|
|
|
return num;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_endpoint_count);
|
|
|
|
/**
|
|
* of_graph_get_port_count() - get the number of port in a device or ports node
|
|
* @np: pointer to the device or ports node
|
|
*
|
|
* Return: count of port of this device or ports node
|
|
*/
|
|
unsigned int of_graph_get_port_count(struct device_node *np)
|
|
{
|
|
unsigned int num = 0;
|
|
|
|
for_each_of_graph_port(np, port)
|
|
num++;
|
|
|
|
return num;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_port_count);
|
|
|
|
/**
|
|
* of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
|
|
* @node: pointer to parent device_node containing graph port/endpoint
|
|
* @port: identifier (value of reg property) of the parent port node
|
|
* @endpoint: identifier (value of reg property) of the endpoint node
|
|
*
|
|
* Return: Remote device node associated with remote endpoint node linked
|
|
* to @node. Use of_node_put() on it when done.
|
|
*/
|
|
struct device_node *of_graph_get_remote_node(const struct device_node *node,
|
|
u32 port, u32 endpoint)
|
|
{
|
|
struct device_node *endpoint_node, *remote;
|
|
|
|
endpoint_node = of_graph_get_endpoint_by_regs(node, port, endpoint);
|
|
if (!endpoint_node) {
|
|
pr_debug("no valid endpoint (%d, %d) for node %pOF\n",
|
|
port, endpoint, node);
|
|
return NULL;
|
|
}
|
|
|
|
remote = of_graph_get_remote_port_parent(endpoint_node);
|
|
of_node_put(endpoint_node);
|
|
if (!remote) {
|
|
pr_debug("no valid remote node\n");
|
|
return NULL;
|
|
}
|
|
|
|
if (!of_device_is_available(remote)) {
|
|
pr_debug("not available for remote node\n");
|
|
of_node_put(remote);
|
|
return NULL;
|
|
}
|
|
|
|
return remote;
|
|
}
|
|
EXPORT_SYMBOL(of_graph_get_remote_node);
|
|
|
|
static struct fwnode_handle *of_fwnode_get(struct fwnode_handle *fwnode)
|
|
{
|
|
return of_fwnode_handle(of_node_get(to_of_node(fwnode)));
|
|
}
|
|
|
|
static void of_fwnode_put(struct fwnode_handle *fwnode)
|
|
{
|
|
of_node_put(to_of_node(fwnode));
|
|
}
|
|
|
|
static bool of_fwnode_device_is_available(const struct fwnode_handle *fwnode)
|
|
{
|
|
return of_device_is_available(to_of_node(fwnode));
|
|
}
|
|
|
|
static bool of_fwnode_device_dma_supported(const struct fwnode_handle *fwnode)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static enum dev_dma_attr
|
|
of_fwnode_device_get_dma_attr(const struct fwnode_handle *fwnode)
|
|
{
|
|
if (of_dma_is_coherent(to_of_node(fwnode)))
|
|
return DEV_DMA_COHERENT;
|
|
else
|
|
return DEV_DMA_NON_COHERENT;
|
|
}
|
|
|
|
static bool of_fwnode_property_present(const struct fwnode_handle *fwnode,
|
|
const char *propname)
|
|
{
|
|
return of_property_read_bool(to_of_node(fwnode), propname);
|
|
}
|
|
|
|
static int of_fwnode_property_read_int_array(const struct fwnode_handle *fwnode,
|
|
const char *propname,
|
|
unsigned int elem_size, void *val,
|
|
size_t nval)
|
|
{
|
|
const struct device_node *node = to_of_node(fwnode);
|
|
|
|
if (!val)
|
|
return of_property_count_elems_of_size(node, propname,
|
|
elem_size);
|
|
|
|
switch (elem_size) {
|
|
case sizeof(u8):
|
|
return of_property_read_u8_array(node, propname, val, nval);
|
|
case sizeof(u16):
|
|
return of_property_read_u16_array(node, propname, val, nval);
|
|
case sizeof(u32):
|
|
return of_property_read_u32_array(node, propname, val, nval);
|
|
case sizeof(u64):
|
|
return of_property_read_u64_array(node, propname, val, nval);
|
|
}
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
static int
|
|
of_fwnode_property_read_string_array(const struct fwnode_handle *fwnode,
|
|
const char *propname, const char **val,
|
|
size_t nval)
|
|
{
|
|
const struct device_node *node = to_of_node(fwnode);
|
|
|
|
return val ?
|
|
of_property_read_string_array(node, propname, val, nval) :
|
|
of_property_count_strings(node, propname);
|
|
}
|
|
|
|
static const char *of_fwnode_get_name(const struct fwnode_handle *fwnode)
|
|
{
|
|
return kbasename(to_of_node(fwnode)->full_name);
|
|
}
|
|
|
|
static const char *of_fwnode_get_name_prefix(const struct fwnode_handle *fwnode)
|
|
{
|
|
/* Root needs no prefix here (its name is "/"). */
|
|
if (!to_of_node(fwnode)->parent)
|
|
return "";
|
|
|
|
return "/";
|
|
}
|
|
|
|
static struct fwnode_handle *
|
|
of_fwnode_get_parent(const struct fwnode_handle *fwnode)
|
|
{
|
|
return of_fwnode_handle(of_get_parent(to_of_node(fwnode)));
|
|
}
|
|
|
|
static struct fwnode_handle *
|
|
of_fwnode_get_next_child_node(const struct fwnode_handle *fwnode,
|
|
struct fwnode_handle *child)
|
|
{
|
|
return of_fwnode_handle(of_get_next_available_child(to_of_node(fwnode),
|
|
to_of_node(child)));
|
|
}
|
|
|
|
static struct fwnode_handle *
|
|
of_fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
|
|
const char *childname)
|
|
{
|
|
const struct device_node *node = to_of_node(fwnode);
|
|
struct device_node *child;
|
|
|
|
for_each_available_child_of_node(node, child)
|
|
if (of_node_name_eq(child, childname))
|
|
return of_fwnode_handle(child);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
of_fwnode_get_reference_args(const struct fwnode_handle *fwnode,
|
|
const char *prop, const char *nargs_prop,
|
|
unsigned int nargs, unsigned int index,
|
|
struct fwnode_reference_args *args)
|
|
{
|
|
struct of_phandle_args of_args;
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
if (nargs_prop)
|
|
ret = of_parse_phandle_with_args(to_of_node(fwnode), prop,
|
|
nargs_prop, index, &of_args);
|
|
else
|
|
ret = of_parse_phandle_with_fixed_args(to_of_node(fwnode), prop,
|
|
nargs, index, &of_args);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (!args) {
|
|
of_node_put(of_args.np);
|
|
return 0;
|
|
}
|
|
|
|
args->nargs = of_args.args_count;
|
|
args->fwnode = of_fwnode_handle(of_args.np);
|
|
|
|
for (i = 0; i < NR_FWNODE_REFERENCE_ARGS; i++)
|
|
args->args[i] = i < of_args.args_count ? of_args.args[i] : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct fwnode_handle *
|
|
of_fwnode_graph_get_next_endpoint(const struct fwnode_handle *fwnode,
|
|
struct fwnode_handle *prev)
|
|
{
|
|
return of_fwnode_handle(of_graph_get_next_endpoint(to_of_node(fwnode),
|
|
to_of_node(prev)));
|
|
}
|
|
|
|
static struct fwnode_handle *
|
|
of_fwnode_graph_get_remote_endpoint(const struct fwnode_handle *fwnode)
|
|
{
|
|
return of_fwnode_handle(
|
|
of_graph_get_remote_endpoint(to_of_node(fwnode)));
|
|
}
|
|
|
|
static struct fwnode_handle *
|
|
of_fwnode_graph_get_port_parent(struct fwnode_handle *fwnode)
|
|
{
|
|
struct device_node *np;
|
|
|
|
/* Get the parent of the port */
|
|
np = of_get_parent(to_of_node(fwnode));
|
|
if (!np)
|
|
return NULL;
|
|
|
|
/* Is this the "ports" node? If not, it's the port parent. */
|
|
if (!of_node_name_eq(np, "ports"))
|
|
return of_fwnode_handle(np);
|
|
|
|
return of_fwnode_handle(of_get_next_parent(np));
|
|
}
|
|
|
|
static int of_fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode,
|
|
struct fwnode_endpoint *endpoint)
|
|
{
|
|
const struct device_node *node = to_of_node(fwnode);
|
|
struct device_node *port_node __free(device_node) = of_get_parent(node);
|
|
|
|
endpoint->local_fwnode = fwnode;
|
|
|
|
of_property_read_u32(port_node, "reg", &endpoint->port);
|
|
of_property_read_u32(node, "reg", &endpoint->id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const void *
|
|
of_fwnode_device_get_match_data(const struct fwnode_handle *fwnode,
|
|
const struct device *dev)
|
|
{
|
|
return of_device_get_match_data(dev);
|
|
}
|
|
|
|
static void of_link_to_phandle(struct device_node *con_np,
|
|
struct device_node *sup_np,
|
|
u8 flags)
|
|
{
|
|
struct device_node *tmp_np __free(device_node) = of_node_get(sup_np);
|
|
|
|
/* Check that sup_np and its ancestors are available. */
|
|
while (tmp_np) {
|
|
if (of_fwnode_handle(tmp_np)->dev)
|
|
break;
|
|
|
|
if (!of_device_is_available(tmp_np))
|
|
return;
|
|
|
|
tmp_np = of_get_next_parent(tmp_np);
|
|
}
|
|
|
|
fwnode_link_add(of_fwnode_handle(con_np), of_fwnode_handle(sup_np), flags);
|
|
}
|
|
|
|
/**
|
|
* parse_prop_cells - Property parsing function for suppliers
|
|
*
|
|
* @np: Pointer to device tree node containing a list
|
|
* @prop_name: Name of property to be parsed. Expected to hold phandle values
|
|
* @index: For properties holding a list of phandles, this is the index
|
|
* into the list.
|
|
* @list_name: Property name that is known to contain list of phandle(s) to
|
|
* supplier(s)
|
|
* @cells_name: property name that specifies phandles' arguments count
|
|
*
|
|
* This is a helper function to parse properties that have a known fixed name
|
|
* and are a list of phandles and phandle arguments.
|
|
*
|
|
* Returns:
|
|
* - phandle node pointer with refcount incremented. Caller must of_node_put()
|
|
* on it when done.
|
|
* - NULL if no phandle found at index
|
|
*/
|
|
static struct device_node *parse_prop_cells(struct device_node *np,
|
|
const char *prop_name, int index,
|
|
const char *list_name,
|
|
const char *cells_name)
|
|
{
|
|
struct of_phandle_args sup_args;
|
|
|
|
if (strcmp(prop_name, list_name))
|
|
return NULL;
|
|
|
|
if (__of_parse_phandle_with_args(np, list_name, cells_name, 0, index,
|
|
&sup_args))
|
|
return NULL;
|
|
|
|
return sup_args.np;
|
|
}
|
|
|
|
#define DEFINE_SIMPLE_PROP(fname, name, cells) \
|
|
static struct device_node *parse_##fname(struct device_node *np, \
|
|
const char *prop_name, int index) \
|
|
{ \
|
|
return parse_prop_cells(np, prop_name, index, name, cells); \
|
|
}
|
|
|
|
static int strcmp_suffix(const char *str, const char *suffix)
|
|
{
|
|
unsigned int len, suffix_len;
|
|
|
|
len = strlen(str);
|
|
suffix_len = strlen(suffix);
|
|
if (len <= suffix_len)
|
|
return -1;
|
|
return strcmp(str + len - suffix_len, suffix);
|
|
}
|
|
|
|
/**
|
|
* parse_suffix_prop_cells - Suffix property parsing function for suppliers
|
|
*
|
|
* @np: Pointer to device tree node containing a list
|
|
* @prop_name: Name of property to be parsed. Expected to hold phandle values
|
|
* @index: For properties holding a list of phandles, this is the index
|
|
* into the list.
|
|
* @suffix: Property suffix that is known to contain list of phandle(s) to
|
|
* supplier(s)
|
|
* @cells_name: property name that specifies phandles' arguments count
|
|
*
|
|
* This is a helper function to parse properties that have a known fixed suffix
|
|
* and are a list of phandles and phandle arguments.
|
|
*
|
|
* Returns:
|
|
* - phandle node pointer with refcount incremented. Caller must of_node_put()
|
|
* on it when done.
|
|
* - NULL if no phandle found at index
|
|
*/
|
|
static struct device_node *parse_suffix_prop_cells(struct device_node *np,
|
|
const char *prop_name, int index,
|
|
const char *suffix,
|
|
const char *cells_name)
|
|
{
|
|
struct of_phandle_args sup_args;
|
|
|
|
if (strcmp_suffix(prop_name, suffix))
|
|
return NULL;
|
|
|
|
if (of_parse_phandle_with_args(np, prop_name, cells_name, index,
|
|
&sup_args))
|
|
return NULL;
|
|
|
|
return sup_args.np;
|
|
}
|
|
|
|
#define DEFINE_SUFFIX_PROP(fname, suffix, cells) \
|
|
static struct device_node *parse_##fname(struct device_node *np, \
|
|
const char *prop_name, int index) \
|
|
{ \
|
|
return parse_suffix_prop_cells(np, prop_name, index, suffix, cells); \
|
|
}
|
|
|
|
/**
|
|
* struct supplier_bindings - Property parsing functions for suppliers
|
|
*
|
|
* @parse_prop: function name
|
|
* parse_prop() finds the node corresponding to a supplier phandle
|
|
* parse_prop.np: Pointer to device node holding supplier phandle property
|
|
* parse_prop.prop_name: Name of property holding a phandle value
|
|
* parse_prop.index: For properties holding a list of phandles, this is the
|
|
* index into the list
|
|
* @get_con_dev: If the consumer node containing the property is never converted
|
|
* to a struct device, implement this ops so fw_devlink can use it
|
|
* to find the true consumer.
|
|
* @optional: Describes whether a supplier is mandatory or not
|
|
* @fwlink_flags: Optional fwnode link flags to use when creating a fwnode link
|
|
* for this property.
|
|
*
|
|
* Returns:
|
|
* parse_prop() return values are
|
|
* - phandle node pointer with refcount incremented. Caller must of_node_put()
|
|
* on it when done.
|
|
* - NULL if no phandle found at index
|
|
*/
|
|
struct supplier_bindings {
|
|
struct device_node *(*parse_prop)(struct device_node *np,
|
|
const char *prop_name, int index);
|
|
struct device_node *(*get_con_dev)(struct device_node *np);
|
|
bool optional;
|
|
u8 fwlink_flags;
|
|
};
|
|
|
|
DEFINE_SIMPLE_PROP(clocks, "clocks", "#clock-cells")
|
|
DEFINE_SIMPLE_PROP(interconnects, "interconnects", "#interconnect-cells")
|
|
DEFINE_SIMPLE_PROP(iommus, "iommus", "#iommu-cells")
|
|
DEFINE_SIMPLE_PROP(mboxes, "mboxes", "#mbox-cells")
|
|
DEFINE_SIMPLE_PROP(io_channels, "io-channels", "#io-channel-cells")
|
|
DEFINE_SIMPLE_PROP(io_backends, "io-backends", "#io-backend-cells")
|
|
DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells")
|
|
DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
|
|
DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
|
|
DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
|
|
DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", "#nvmem-cell-cells")
|
|
DEFINE_SIMPLE_PROP(phys, "phys", "#phy-cells")
|
|
DEFINE_SIMPLE_PROP(wakeup_parent, "wakeup-parent", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl0, "pinctrl-0", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl1, "pinctrl-1", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl2, "pinctrl-2", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl3, "pinctrl-3", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl4, "pinctrl-4", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl5, "pinctrl-5", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl6, "pinctrl-6", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl7, "pinctrl-7", NULL)
|
|
DEFINE_SIMPLE_PROP(pinctrl8, "pinctrl-8", NULL)
|
|
DEFINE_SIMPLE_PROP(pwms, "pwms", "#pwm-cells")
|
|
DEFINE_SIMPLE_PROP(resets, "resets", "#reset-cells")
|
|
DEFINE_SIMPLE_PROP(leds, "leds", NULL)
|
|
DEFINE_SIMPLE_PROP(backlight, "backlight", NULL)
|
|
DEFINE_SIMPLE_PROP(panel, "panel", NULL)
|
|
DEFINE_SIMPLE_PROP(msi_parent, "msi-parent", "#msi-cells")
|
|
DEFINE_SIMPLE_PROP(post_init_providers, "post-init-providers", NULL)
|
|
DEFINE_SIMPLE_PROP(access_controllers, "access-controllers", "#access-controller-cells")
|
|
DEFINE_SIMPLE_PROP(pses, "pses", "#pse-cells")
|
|
DEFINE_SIMPLE_PROP(power_supplies, "power-supplies", NULL)
|
|
DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
|
|
DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
|
|
|
|
static struct device_node *parse_gpios(struct device_node *np,
|
|
const char *prop_name, int index)
|
|
{
|
|
if (!strcmp_suffix(prop_name, ",nr-gpios"))
|
|
return NULL;
|
|
|
|
return parse_suffix_prop_cells(np, prop_name, index, "-gpios",
|
|
"#gpio-cells");
|
|
}
|
|
|
|
static struct device_node *parse_iommu_maps(struct device_node *np,
|
|
const char *prop_name, int index)
|
|
{
|
|
if (strcmp(prop_name, "iommu-map"))
|
|
return NULL;
|
|
|
|
return of_parse_phandle(np, prop_name, (index * 4) + 1);
|
|
}
|
|
|
|
static struct device_node *parse_gpio_compat(struct device_node *np,
|
|
const char *prop_name, int index)
|
|
{
|
|
struct of_phandle_args sup_args;
|
|
|
|
if (strcmp(prop_name, "gpio") && strcmp(prop_name, "gpios"))
|
|
return NULL;
|
|
|
|
/*
|
|
* Ignore node with gpio-hog property since its gpios are all provided
|
|
* by its parent.
|
|
*/
|
|
if (of_property_read_bool(np, "gpio-hog"))
|
|
return NULL;
|
|
|
|
if (of_parse_phandle_with_args(np, prop_name, "#gpio-cells", index,
|
|
&sup_args))
|
|
return NULL;
|
|
|
|
return sup_args.np;
|
|
}
|
|
|
|
static struct device_node *parse_interrupts(struct device_node *np,
|
|
const char *prop_name, int index)
|
|
{
|
|
struct of_phandle_args sup_args;
|
|
|
|
if (!IS_ENABLED(CONFIG_OF_IRQ) || IS_ENABLED(CONFIG_PPC))
|
|
return NULL;
|
|
|
|
if (strcmp(prop_name, "interrupts") &&
|
|
strcmp(prop_name, "interrupts-extended"))
|
|
return NULL;
|
|
|
|
return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
|
|
}
|
|
|
|
static struct device_node *parse_interrupt_map(struct device_node *np,
|
|
const char *prop_name, int index)
|
|
{
|
|
const __be32 *imap, *imap_end;
|
|
struct of_phandle_args sup_args;
|
|
u32 addrcells, intcells;
|
|
int imaplen;
|
|
|
|
if (!IS_ENABLED(CONFIG_OF_IRQ))
|
|
return NULL;
|
|
|
|
if (strcmp(prop_name, "interrupt-map"))
|
|
return NULL;
|
|
|
|
if (of_property_read_u32(np, "#interrupt-cells", &intcells))
|
|
return NULL;
|
|
addrcells = of_bus_n_addr_cells(np);
|
|
|
|
imap = of_get_property(np, "interrupt-map", &imaplen);
|
|
imaplen /= sizeof(*imap);
|
|
if (!imap)
|
|
return NULL;
|
|
|
|
imap_end = imap + imaplen;
|
|
|
|
for (int i = 0; imap + addrcells + intcells + 1 < imap_end; i++) {
|
|
imap += addrcells + intcells;
|
|
|
|
imap = of_irq_parse_imap_parent(imap, imap_end - imap, &sup_args);
|
|
if (!imap)
|
|
return NULL;
|
|
|
|
if (i == index)
|
|
return sup_args.np;
|
|
|
|
of_node_put(sup_args.np);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct device_node *parse_remote_endpoint(struct device_node *np,
|
|
const char *prop_name,
|
|
int index)
|
|
{
|
|
/* Return NULL for index > 0 to signify end of remote-endpoints. */
|
|
if (index > 0 || strcmp(prop_name, "remote-endpoint"))
|
|
return NULL;
|
|
|
|
return of_graph_get_remote_port_parent(np);
|
|
}
|
|
|
|
static const struct supplier_bindings of_supplier_bindings[] = {
|
|
{ .parse_prop = parse_clocks, },
|
|
{ .parse_prop = parse_interconnects, },
|
|
{ .parse_prop = parse_iommus, .optional = true, },
|
|
{ .parse_prop = parse_iommu_maps, .optional = true, },
|
|
{ .parse_prop = parse_mboxes, },
|
|
{ .parse_prop = parse_io_channels, },
|
|
{ .parse_prop = parse_io_backends, },
|
|
{ .parse_prop = parse_dmas, .optional = true, },
|
|
{ .parse_prop = parse_power_domains, },
|
|
{ .parse_prop = parse_hwlocks, },
|
|
{ .parse_prop = parse_extcon, },
|
|
{ .parse_prop = parse_nvmem_cells, },
|
|
{ .parse_prop = parse_phys, },
|
|
{ .parse_prop = parse_wakeup_parent, },
|
|
{ .parse_prop = parse_pinctrl0, },
|
|
{ .parse_prop = parse_pinctrl1, },
|
|
{ .parse_prop = parse_pinctrl2, },
|
|
{ .parse_prop = parse_pinctrl3, },
|
|
{ .parse_prop = parse_pinctrl4, },
|
|
{ .parse_prop = parse_pinctrl5, },
|
|
{ .parse_prop = parse_pinctrl6, },
|
|
{ .parse_prop = parse_pinctrl7, },
|
|
{ .parse_prop = parse_pinctrl8, },
|
|
{
|
|
.parse_prop = parse_remote_endpoint,
|
|
.get_con_dev = of_graph_get_port_parent,
|
|
},
|
|
{ .parse_prop = parse_pwms, },
|
|
{ .parse_prop = parse_resets, },
|
|
{ .parse_prop = parse_leds, },
|
|
{ .parse_prop = parse_backlight, },
|
|
{ .parse_prop = parse_panel, },
|
|
{ .parse_prop = parse_msi_parent, },
|
|
{ .parse_prop = parse_pses, },
|
|
{ .parse_prop = parse_power_supplies, },
|
|
{ .parse_prop = parse_gpio_compat, },
|
|
{ .parse_prop = parse_interrupts, },
|
|
{ .parse_prop = parse_interrupt_map, },
|
|
{ .parse_prop = parse_access_controllers, },
|
|
{ .parse_prop = parse_regulators, },
|
|
{ .parse_prop = parse_gpio, },
|
|
{ .parse_prop = parse_gpios, },
|
|
{
|
|
.parse_prop = parse_post_init_providers,
|
|
.fwlink_flags = FWLINK_FLAG_IGNORE,
|
|
},
|
|
{}
|
|
};
|
|
|
|
/**
|
|
* of_link_property - Create device links to suppliers listed in a property
|
|
* @con_np: The consumer device tree node which contains the property
|
|
* @prop_name: Name of property to be parsed
|
|
*
|
|
* This function checks if the property @prop_name that is present in the
|
|
* @con_np device tree node is one of the known common device tree bindings
|
|
* that list phandles to suppliers. If @prop_name isn't one, this function
|
|
* doesn't do anything.
|
|
*
|
|
* If @prop_name is one, this function attempts to create fwnode links from the
|
|
* consumer device tree node @con_np to all the suppliers device tree nodes
|
|
* listed in @prop_name.
|
|
*
|
|
* Any failed attempt to create a fwnode link will NOT result in an immediate
|
|
* return. of_link_property() must create links to all the available supplier
|
|
* device tree nodes even when attempts to create a link to one or more
|
|
* suppliers fail.
|
|
*/
|
|
static int of_link_property(struct device_node *con_np, const char *prop_name)
|
|
{
|
|
struct device_node *phandle;
|
|
const struct supplier_bindings *s = of_supplier_bindings;
|
|
unsigned int i = 0;
|
|
bool matched = false;
|
|
|
|
/* Do not stop at first failed link, link all available suppliers. */
|
|
while (!matched && s->parse_prop) {
|
|
if (s->optional && !fw_devlink_is_strict()) {
|
|
s++;
|
|
continue;
|
|
}
|
|
|
|
while ((phandle = s->parse_prop(con_np, prop_name, i))) {
|
|
struct device_node *con_dev_np __free(device_node) =
|
|
s->get_con_dev ? s->get_con_dev(con_np) : of_node_get(con_np);
|
|
|
|
matched = true;
|
|
i++;
|
|
of_link_to_phandle(con_dev_np, phandle, s->fwlink_flags);
|
|
of_node_put(phandle);
|
|
}
|
|
s++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __iomem *of_fwnode_iomap(struct fwnode_handle *fwnode, int index)
|
|
{
|
|
#ifdef CONFIG_OF_ADDRESS
|
|
return of_iomap(to_of_node(fwnode), index);
|
|
#else
|
|
return NULL;
|
|
#endif
|
|
}
|
|
|
|
static int of_fwnode_irq_get(const struct fwnode_handle *fwnode,
|
|
unsigned int index)
|
|
{
|
|
return of_irq_get(to_of_node(fwnode), index);
|
|
}
|
|
|
|
static int of_fwnode_add_links(struct fwnode_handle *fwnode)
|
|
{
|
|
const struct property *p;
|
|
struct device_node *con_np = to_of_node(fwnode);
|
|
|
|
if (IS_ENABLED(CONFIG_X86))
|
|
return 0;
|
|
|
|
if (!con_np)
|
|
return -EINVAL;
|
|
|
|
for_each_property_of_node(con_np, p)
|
|
of_link_property(con_np, p->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct fwnode_operations of_fwnode_ops = {
|
|
.get = of_fwnode_get,
|
|
.put = of_fwnode_put,
|
|
.device_is_available = of_fwnode_device_is_available,
|
|
.device_get_match_data = of_fwnode_device_get_match_data,
|
|
.device_dma_supported = of_fwnode_device_dma_supported,
|
|
.device_get_dma_attr = of_fwnode_device_get_dma_attr,
|
|
.property_present = of_fwnode_property_present,
|
|
.property_read_int_array = of_fwnode_property_read_int_array,
|
|
.property_read_string_array = of_fwnode_property_read_string_array,
|
|
.get_name = of_fwnode_get_name,
|
|
.get_name_prefix = of_fwnode_get_name_prefix,
|
|
.get_parent = of_fwnode_get_parent,
|
|
.get_next_child_node = of_fwnode_get_next_child_node,
|
|
.get_named_child_node = of_fwnode_get_named_child_node,
|
|
.get_reference_args = of_fwnode_get_reference_args,
|
|
.graph_get_next_endpoint = of_fwnode_graph_get_next_endpoint,
|
|
.graph_get_remote_endpoint = of_fwnode_graph_get_remote_endpoint,
|
|
.graph_get_port_parent = of_fwnode_graph_get_port_parent,
|
|
.graph_parse_endpoint = of_fwnode_graph_parse_endpoint,
|
|
.iomap = of_fwnode_iomap,
|
|
.irq_get = of_fwnode_irq_get,
|
|
.add_links = of_fwnode_add_links,
|
|
};
|
|
EXPORT_SYMBOL_GPL(of_fwnode_ops);
|