mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-28 16:56:26 +00:00
8b6742e5b3
The FIELD_PREP() and FIELD_GET() macros are defined in the linux/bitfield.h. Include this header to avoid missing the macro definitions. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406300817.hcJ9VtLf-lkp@intel.com/ Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/ZoJhQVF-U6sSJ_Sg@fedora Signed-off-by: Lee Jones <lee@kernel.org>
418 lines
10 KiB
C
418 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2024 ROHM Semiconductors
|
|
*
|
|
* ROHM BD96801 watchdog driver
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/rohm-bd96801.h>
|
|
#include <linux/mfd/rohm-generic.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
static bool nowayout;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout,
|
|
"Watchdog cannot be stopped once started (default=\"false\")");
|
|
|
|
#define BD96801_WD_TMO_SHORT_MASK 0x70
|
|
#define BD96801_WD_RATIO_MASK 0x3
|
|
#define BD96801_WD_TYPE_MASK 0x4
|
|
#define BD96801_WD_TYPE_SLOW 0x4
|
|
#define BD96801_WD_TYPE_WIN 0x0
|
|
|
|
#define BD96801_WD_EN_MASK 0x3
|
|
#define BD96801_WD_IF_EN 0x1
|
|
#define BD96801_WD_QA_EN 0x2
|
|
#define BD96801_WD_DISABLE 0x0
|
|
|
|
#define BD96801_WD_ASSERT_MASK 0x8
|
|
#define BD96801_WD_ASSERT_RST 0x8
|
|
#define BD96801_WD_ASSERT_IRQ 0x0
|
|
|
|
#define BD96801_WD_FEED_MASK 0x1
|
|
#define BD96801_WD_FEED 0x1
|
|
|
|
/* 1.1 mS */
|
|
#define FASTNG_MIN 11
|
|
#define FASTNG_MAX_US (100 * FASTNG_MIN << 7)
|
|
#define SLOWNG_MAX_US (16 * FASTNG_MAX_US)
|
|
|
|
#define BD96801_WDT_DEFAULT_MARGIN_MS 1843
|
|
/* Unit is seconds */
|
|
#define DEFAULT_TIMEOUT 30
|
|
|
|
/*
|
|
* BD96801 WDG supports window mode so the TMO consists of SHORT and LONG
|
|
* timeout values. SHORT time is meaningful only in window mode where feeding
|
|
* period shorter than SHORT would be an error. LONG time is used to detect if
|
|
* feeding is not occurring within given time limit (SoC SW hangs). The LONG
|
|
* timeout time is a multiple of (2, 4, 8 or 16 times) the SHORT timeout.
|
|
*/
|
|
|
|
struct wdtbd96801 {
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct watchdog_device wdt;
|
|
};
|
|
|
|
static int bd96801_wdt_ping(struct watchdog_device *wdt)
|
|
{
|
|
struct wdtbd96801 *w = watchdog_get_drvdata(wdt);
|
|
|
|
return regmap_update_bits(w->regmap, BD96801_REG_WD_FEED,
|
|
BD96801_WD_FEED_MASK, BD96801_WD_FEED);
|
|
}
|
|
|
|
static int bd96801_wdt_start(struct watchdog_device *wdt)
|
|
{
|
|
struct wdtbd96801 *w = watchdog_get_drvdata(wdt);
|
|
|
|
return regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
|
|
BD96801_WD_EN_MASK, BD96801_WD_IF_EN);
|
|
}
|
|
|
|
static int bd96801_wdt_stop(struct watchdog_device *wdt)
|
|
{
|
|
struct wdtbd96801 *w = watchdog_get_drvdata(wdt);
|
|
|
|
return regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
|
|
BD96801_WD_EN_MASK, BD96801_WD_DISABLE);
|
|
}
|
|
|
|
static const struct watchdog_info bd96801_wdt_info = {
|
|
.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
|
|
WDIOF_SETTIMEOUT,
|
|
.identity = "BD96801 Watchdog",
|
|
};
|
|
|
|
static const struct watchdog_ops bd96801_wdt_ops = {
|
|
.start = bd96801_wdt_start,
|
|
.stop = bd96801_wdt_stop,
|
|
.ping = bd96801_wdt_ping,
|
|
};
|
|
|
|
static int find_closest_fast(unsigned int target, int *sel, unsigned int *val)
|
|
{
|
|
unsigned int window = FASTNG_MIN;
|
|
int i;
|
|
|
|
for (i = 0; i < 8 && window < target; i++)
|
|
window <<= 1;
|
|
|
|
if (i == 8)
|
|
return -EINVAL;
|
|
|
|
*val = window;
|
|
*sel = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int find_closest_slow_by_fast(unsigned int fast_val, unsigned int *target,
|
|
int *slowsel)
|
|
{
|
|
static const int multipliers[] = {2, 4, 8, 16};
|
|
int sel;
|
|
|
|
for (sel = 0; sel < ARRAY_SIZE(multipliers) &&
|
|
multipliers[sel] * fast_val < *target; sel++)
|
|
;
|
|
|
|
if (sel == ARRAY_SIZE(multipliers))
|
|
return -EINVAL;
|
|
|
|
*slowsel = sel;
|
|
*target = multipliers[sel] * fast_val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int find_closest_slow(unsigned int *target, int *slow_sel, int *fast_sel)
|
|
{
|
|
static const int multipliers[] = {2, 4, 8, 16};
|
|
unsigned int window = FASTNG_MIN;
|
|
unsigned int val = 0;
|
|
int i, j;
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
for (j = 0; j < ARRAY_SIZE(multipliers); j++) {
|
|
unsigned int slow;
|
|
|
|
slow = window * multipliers[j];
|
|
if (slow >= *target && (!val || slow < val)) {
|
|
val = slow;
|
|
*fast_sel = i;
|
|
*slow_sel = j;
|
|
}
|
|
}
|
|
window <<= 1;
|
|
}
|
|
if (!val)
|
|
return -EINVAL;
|
|
|
|
*target = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd96801_set_wdt_mode(struct wdtbd96801 *w, unsigned int hw_margin,
|
|
unsigned int hw_margin_min)
|
|
{
|
|
int fastng, slowng, type, ret, reg, mask;
|
|
struct device *dev = w->dev;
|
|
|
|
|
|
if (hw_margin_min * 1000 > FASTNG_MAX_US) {
|
|
dev_err(dev, "Unsupported fast timeout %u uS [max %u]\n",
|
|
hw_margin_min * 1000, FASTNG_MAX_US);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (hw_margin * 1000 > SLOWNG_MAX_US) {
|
|
dev_err(dev, "Unsupported slow timeout %u uS [max %u]\n",
|
|
hw_margin * 1000, SLOWNG_MAX_US);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Convert to 100uS to guarantee reasonable timeouts fit in
|
|
* 32bit maintaining also a decent accuracy.
|
|
*/
|
|
hw_margin *= 10;
|
|
hw_margin_min *= 10;
|
|
|
|
if (hw_margin_min) {
|
|
unsigned int min;
|
|
|
|
type = BD96801_WD_TYPE_WIN;
|
|
dev_dbg(dev, "Setting type WINDOW 0x%x\n", type);
|
|
ret = find_closest_fast(hw_margin_min, &fastng, &min);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = find_closest_slow_by_fast(min, &hw_margin, &slowng);
|
|
if (ret) {
|
|
dev_err(dev,
|
|
"can't support slow timeout %u uS using fast %u uS. [max slow %u uS]\n",
|
|
hw_margin * 100, min * 100, min * 100 * 16);
|
|
|
|
return ret;
|
|
}
|
|
w->wdt.min_hw_heartbeat_ms = min / 10;
|
|
} else {
|
|
type = BD96801_WD_TYPE_SLOW;
|
|
dev_dbg(dev, "Setting type SLOW 0x%x\n", type);
|
|
ret = find_closest_slow(&hw_margin, &slowng, &fastng);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
w->wdt.max_hw_heartbeat_ms = hw_margin / 10;
|
|
|
|
fastng = FIELD_PREP(BD96801_WD_TMO_SHORT_MASK, fastng);
|
|
|
|
reg = slowng | fastng;
|
|
mask = BD96801_WD_RATIO_MASK | BD96801_WD_TMO_SHORT_MASK;
|
|
ret = regmap_update_bits(w->regmap, BD96801_REG_WD_TMO,
|
|
mask, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
|
|
BD96801_WD_TYPE_MASK, type);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bd96801_set_heartbeat_from_hw(struct wdtbd96801 *w,
|
|
unsigned int conf_reg)
|
|
{
|
|
int ret;
|
|
unsigned int val, sel, fast;
|
|
|
|
/*
|
|
* The BD96801 supports a somewhat peculiar QA-mode, which we do not
|
|
* support in this driver. If the QA-mode is enabled then we just
|
|
* warn and bail-out.
|
|
*/
|
|
if ((conf_reg & BD96801_WD_EN_MASK) != BD96801_WD_IF_EN) {
|
|
dev_err(w->dev, "watchdog set to Q&A mode - exiting\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_read(w->regmap, BD96801_REG_WD_TMO, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sel = FIELD_GET(BD96801_WD_TMO_SHORT_MASK, val);
|
|
fast = FASTNG_MIN << sel;
|
|
|
|
sel = (val & BD96801_WD_RATIO_MASK) + 1;
|
|
w->wdt.max_hw_heartbeat_ms = (fast << sel) / USEC_PER_MSEC;
|
|
|
|
if ((conf_reg & BD96801_WD_TYPE_MASK) == BD96801_WD_TYPE_WIN)
|
|
w->wdt.min_hw_heartbeat_ms = fast / USEC_PER_MSEC;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int init_wdg_hw(struct wdtbd96801 *w)
|
|
{
|
|
u32 hw_margin[2];
|
|
int count, ret;
|
|
u32 hw_margin_max = BD96801_WDT_DEFAULT_MARGIN_MS, hw_margin_min = 0;
|
|
|
|
count = device_property_count_u32(w->dev->parent, "rohm,hw-timeout-ms");
|
|
if (count < 0 && count != -EINVAL)
|
|
return count;
|
|
|
|
if (count > 0) {
|
|
if (count > ARRAY_SIZE(hw_margin))
|
|
return -EINVAL;
|
|
|
|
ret = device_property_read_u32_array(w->dev->parent,
|
|
"rohm,hw-timeout-ms",
|
|
&hw_margin[0], count);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (count == 1)
|
|
hw_margin_max = hw_margin[0];
|
|
|
|
if (count == 2) {
|
|
if (hw_margin[1] > hw_margin[0]) {
|
|
hw_margin_max = hw_margin[1];
|
|
hw_margin_min = hw_margin[0];
|
|
} else {
|
|
hw_margin_max = hw_margin[0];
|
|
hw_margin_min = hw_margin[1];
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = bd96801_set_wdt_mode(w, hw_margin_max, hw_margin_min);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = device_property_match_string(w->dev->parent, "rohm,wdg-action",
|
|
"prstb");
|
|
if (ret >= 0) {
|
|
ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
|
|
BD96801_WD_ASSERT_MASK,
|
|
BD96801_WD_ASSERT_RST);
|
|
return ret;
|
|
}
|
|
|
|
ret = device_property_match_string(w->dev->parent, "rohm,wdg-action",
|
|
"intb-only");
|
|
if (ret >= 0) {
|
|
ret = regmap_update_bits(w->regmap, BD96801_REG_WD_CONF,
|
|
BD96801_WD_ASSERT_MASK,
|
|
BD96801_WD_ASSERT_IRQ);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t bd96801_irq_hnd(int irq, void *data)
|
|
{
|
|
emergency_restart();
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int bd96801_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct wdtbd96801 *w;
|
|
int ret, irq;
|
|
unsigned int val;
|
|
|
|
w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL);
|
|
if (!w)
|
|
return -ENOMEM;
|
|
|
|
w->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
w->dev = &pdev->dev;
|
|
|
|
w->wdt.info = &bd96801_wdt_info;
|
|
w->wdt.ops = &bd96801_wdt_ops;
|
|
w->wdt.parent = pdev->dev.parent;
|
|
w->wdt.timeout = DEFAULT_TIMEOUT;
|
|
watchdog_set_drvdata(&w->wdt, w);
|
|
|
|
ret = regmap_read(w->regmap, BD96801_REG_WD_CONF, &val);
|
|
if (ret)
|
|
return dev_err_probe(&pdev->dev, ret,
|
|
"Failed to get the watchdog state\n");
|
|
|
|
/*
|
|
* If the WDG is already enabled we assume it is configured by boot.
|
|
* In this case we just update the hw-timeout based on values set to
|
|
* the timeout / mode registers and leave the hardware configs
|
|
* untouched.
|
|
*/
|
|
if ((val & BD96801_WD_EN_MASK) != BD96801_WD_DISABLE) {
|
|
dev_dbg(&pdev->dev, "watchdog was running during probe\n");
|
|
ret = bd96801_set_heartbeat_from_hw(w, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
set_bit(WDOG_HW_RUNNING, &w->wdt.status);
|
|
} else {
|
|
/* If WDG is not running so we will initializate it */
|
|
ret = init_wdg_hw(w);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(w->dev, "heartbeat set to %u - %u\n",
|
|
w->wdt.min_hw_heartbeat_ms, w->wdt.max_hw_heartbeat_ms);
|
|
|
|
watchdog_init_timeout(&w->wdt, 0, pdev->dev.parent);
|
|
watchdog_set_nowayout(&w->wdt, nowayout);
|
|
watchdog_stop_on_reboot(&w->wdt);
|
|
|
|
irq = platform_get_irq_byname(pdev, "bd96801-wdg");
|
|
if (irq > 0) {
|
|
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
|
|
bd96801_irq_hnd,
|
|
IRQF_ONESHOT, "bd96801-wdg",
|
|
NULL);
|
|
if (ret)
|
|
return dev_err_probe(&pdev->dev, ret,
|
|
"Failed to register IRQ\n");
|
|
}
|
|
|
|
return devm_watchdog_register_device(&pdev->dev, &w->wdt);
|
|
}
|
|
|
|
static const struct platform_device_id bd96801_wdt_id[] = {
|
|
{ "bd96801-wdt", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, bd96801_wdt_id);
|
|
|
|
static struct platform_driver bd96801_wdt = {
|
|
.driver = {
|
|
.name = "bd96801-wdt"
|
|
},
|
|
.probe = bd96801_wdt_probe,
|
|
.id_table = bd96801_wdt_id,
|
|
};
|
|
module_platform_driver(bd96801_wdt);
|
|
|
|
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
|
|
MODULE_DESCRIPTION("BD96801 watchdog driver");
|
|
MODULE_LICENSE("GPL");
|