mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-12-28 16:56:26 +00:00
f600bb612b
Provide access to MIIM PHY Control register (Reg. 31) through ksz8_r_phy_ctrl() and ksz8_w_phy_ctrl() functions. Necessary for upcoming micrel.c patch to address forced link mode configuration. Closes: https://lore.kernel.org/oe-kbuild-all/202310112224.iYgvjBUy-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
74 lines
2.1 KiB
C
74 lines
2.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* include/linux/micrel_phy.h
|
|
*
|
|
* Micrel PHY IDs
|
|
*/
|
|
|
|
#ifndef _MICREL_PHY_H
|
|
#define _MICREL_PHY_H
|
|
|
|
#define MICREL_OUI 0x0885
|
|
|
|
#define MICREL_PHY_ID_MASK 0x00fffff0
|
|
|
|
#define PHY_ID_KSZ8873MLL 0x000e7237
|
|
#define PHY_ID_KSZ9021 0x00221610
|
|
#define PHY_ID_KSZ9021RLRN 0x00221611
|
|
#define PHY_ID_KS8737 0x00221720
|
|
#define PHY_ID_KSZ8021 0x00221555
|
|
#define PHY_ID_KSZ8031 0x00221556
|
|
#define PHY_ID_KSZ8041 0x00221510
|
|
/* undocumented */
|
|
#define PHY_ID_KSZ8041RNLI 0x00221537
|
|
#define PHY_ID_KSZ8051 0x00221550
|
|
/* same id: ks8001 Rev. A/B, and ks8721 Rev 3. */
|
|
#define PHY_ID_KSZ8001 0x0022161A
|
|
/* same id: KS8081, KS8091 */
|
|
#define PHY_ID_KSZ8081 0x00221560
|
|
#define PHY_ID_KSZ8061 0x00221570
|
|
#define PHY_ID_KSZ9031 0x00221620
|
|
#define PHY_ID_KSZ9131 0x00221640
|
|
#define PHY_ID_LAN8814 0x00221660
|
|
#define PHY_ID_LAN8804 0x00221670
|
|
#define PHY_ID_LAN8841 0x00221650
|
|
|
|
#define PHY_ID_KSZ886X 0x00221430
|
|
#define PHY_ID_KSZ8863 0x00221435
|
|
|
|
#define PHY_ID_KSZ87XX 0x00221550
|
|
|
|
#define PHY_ID_KSZ9477 0x00221631
|
|
|
|
/* struct phy_device dev_flags definitions */
|
|
#define MICREL_PHY_50MHZ_CLK BIT(0)
|
|
#define MICREL_PHY_FXEN BIT(1)
|
|
#define MICREL_KSZ8_P1_ERRATA BIT(2)
|
|
#define MICREL_NO_EEE BIT(3)
|
|
|
|
#define MICREL_KSZ9021_EXTREG_CTRL 0xB
|
|
#define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC
|
|
#define MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW 0x104
|
|
#define MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW 0x105
|
|
|
|
/* Device specific MII_BMCR (Reg 0) bits */
|
|
/* 1 = HP Auto MDI/MDI-X mode, 0 = Microchip Auto MDI/MDI-X mode */
|
|
#define KSZ886X_BMCR_HP_MDIX BIT(5)
|
|
/* 1 = Force MDI (transmit on RXP/RXM pins), 0 = Normal operation
|
|
* (transmit on TXP/TXM pins)
|
|
*/
|
|
#define KSZ886X_BMCR_FORCE_MDI BIT(4)
|
|
/* 1 = Disable auto MDI-X */
|
|
#define KSZ886X_BMCR_DISABLE_AUTO_MDIX BIT(3)
|
|
#define KSZ886X_BMCR_DISABLE_FAR_END_FAULT BIT(2)
|
|
#define KSZ886X_BMCR_DISABLE_TRANSMIT BIT(1)
|
|
#define KSZ886X_BMCR_DISABLE_LED BIT(0)
|
|
|
|
/* PHY Special Control/Status Register (Reg 31) */
|
|
#define KSZ886X_CTRL_MDIX_STAT BIT(4)
|
|
#define KSZ886X_CTRL_FORCE_LINK BIT(3)
|
|
#define KSZ886X_CTRL_PWRSAVE BIT(2)
|
|
#define KSZ886X_CTRL_REMOTE_LOOPBACK BIT(1)
|
|
|
|
#endif /* _MICREL_PHY_H */
|