Marek Vasut 19e221bed2 i2c: mxs: Fix PIO mode on i.MX23
The i.MX23 I2C controller is also capable of PIO, but needs a little harder
push to behave. The controller needs to be reset after every PIO/DMA operation
for some reason, otherwise in rare cases, the controller can hang or emit
bytes onto the bus.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-06 15:56:27 +02:00
..
2013-08-23 10:22:20 +02:00
2013-02-12 11:33:59 +01:00
2013-08-19 19:46:30 +02:00
2013-08-23 10:22:20 +02:00
2013-08-23 10:22:20 +02:00
2013-08-23 10:22:20 +02:00
2008-01-27 18:14:45 +01:00
2013-08-23 10:22:20 +02:00
2011-01-04 00:53:37 +00:00
2013-09-28 16:32:12 +02:00
2013-08-28 10:48:44 +02:00
2013-10-06 15:56:27 +02:00
2013-08-19 19:46:30 +02:00
2013-08-23 10:22:20 +02:00
2011-05-24 20:58:49 +02:00
2013-08-19 19:46:30 +02:00
2013-08-23 10:22:20 +02:00
2013-09-30 06:02:32 +02:00
2013-08-19 19:46:30 +02:00
2013-08-19 19:46:30 +02:00
2013-02-11 15:59:40 +01:00
2013-08-23 10:22:20 +02:00
2013-08-23 10:22:20 +02:00
2013-09-13 15:09:52 +02:00
2013-07-01 08:35:44 +02:00