Kernel/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-12-29 09:16:33 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
289e1c8921
linux-stable/Documentation/memory-barriers.txt
Parav Pandit 289e1c8921 locking/memory-barriers.txt: Improve documentation for writel() example 
The cited commit describes that when using writel(), explicit wmb()
is not needed. wmb() is an expensive barrier. writel() uses the needed
platform specific barrier instead of wmb().

writeX() section of "KERNEL I/O BARRIER EFFECTS" already describes
ordering of I/O accessors with MMIO writes.

Hence add the comment for pseudo code of writel() and remove confusing
text around writel() and wmb().

commit 5846581e35 ("locking/memory-barriers.txt: Fix broken DMA vs. MMIO ordering example")

Co-developed-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-01-03 20:47:04 -08:00

3008 lines
111 KiB
Plaintext
Raw Blame History

============================
LINUX KERNEL MEMORY BARRIERS
============================
By: David Howells <dhowells@redhat.com>
Paul E. McKenney <paulmck@linux.ibm.com>
Will Deacon <will.deacon@arm.com>
Peter Zijlstra <peterz@infradead.org>
==========
DISCLAIMER
==========
This document is not a specification; it is intentionally (for the sake of
brevity) and unintentionally (due to being human) incomplete. This document is
meant as a guide to using the various memory barriers provided by Linux, but
in case of any doubt (and there are many) please ask. Some doubts may be
resolved by referring to the formal memory consistency model and related
documentation at tools/memory-model/. Nevertheless, even this memory
model should be viewed as the collective opinion of its maintainers rather
than as an infallible oracle.
To repeat, this document is not a specification of what Linux expects from
hardware.
The purpose of this document is twofold:
(1) to specify the minimum functionality that one can rely on for any
particular barrier, and
(2) to provide a guide as to how to use the barriers that are available.
Note that an architecture can provide more than the minimum requirement
for any particular barrier, but if the architecture provides less than
that, that architecture is incorrect.
Note also that it is possible that a barrier may be a no-op for an
architecture because the way that arch works renders an explicit barrier
unnecessary in that case.
========
CONTENTS
========
(*) Abstract memory access model.
- Device operations.
- Guarantees.
(*) What are memory barriers?
- Varieties of memory barrier.
- What may not be assumed about memory barriers?
- Address-dependency barriers (historical).
- Control dependencies.
- SMP barrier pairing.
- Examples of memory barrier sequences.
- Read memory barriers vs load speculation.
- Multicopy atomicity.
(*) Explicit kernel barriers.
- Compiler barrier.
- CPU memory barriers.
(*) Implicit kernel memory barriers.
- Lock acquisition functions.
- Interrupt disabling functions.
- Sleep and wake-up functions.
- Miscellaneous functions.
(*) Inter-CPU acquiring barrier effects.
- Acquires vs memory accesses.
(*) Where are memory barriers needed?
- Interprocessor interaction.
- Atomic operations.
- Accessing devices.
- Interrupts.
(*) Kernel I/O barrier effects.
(*) Assumed minimum execution ordering model.
(*) The effects of the cpu cache.
- Cache coherency.
- Cache coherency vs DMA.
- Cache coherency vs MMIO.
(*) The things CPUs get up to.
- And then there's the Alpha.
- Virtual Machine Guests.
(*) Example uses.
- Circular buffers.
(*) References.
============================
ABSTRACT MEMORY ACCESS MODEL
============================
Consider the following abstract model of the system:
: :
: :
: :
+-------+ : +--------+ : +-------+
| | : | | : | |
| | : | | : | |
| CPU 1 |<----->| Memory |<----->| CPU 2 |
| | : | | : | |
| | : | | : | |
+-------+ : +--------+ : +-------+
^ : ^ : ^
| : | : |
| : | : |
| : v : |
| : +--------+ : |
| : | | : |
| : | | : |
+---------->| Device |<----------+
: | | :
: | | :
: +--------+ :
: :
Each CPU executes a program that generates memory access operations. In the
abstract CPU, memory operation ordering is very relaxed, and a CPU may actually
perform the memory operations in any order it likes, provided program causality
appears to be maintained. Similarly, the compiler may also arrange the
instructions it emits in any order it likes, provided it doesn't affect the
apparent operation of the program.
So in the above diagram, the effects of the memory operations performed by a
CPU are perceived by the rest of the system as the operations cross the
interface between the CPU and rest of the system (the dotted lines).
For example, consider the following sequence of events:
CPU 1 CPU 2
=============== ===============
{ A == 1; B == 2 }
A = 3; x = B;
B = 4; y = A;
The set of accesses as seen by the memory system in the middle can be arranged
in 24 different combinations:
STORE A=3, STORE B=4, y=LOAD A->3, x=LOAD B->4
STORE A=3, STORE B=4, x=LOAD B->4, y=LOAD A->3
STORE A=3, y=LOAD A->3, STORE B=4, x=LOAD B->4
STORE A=3, y=LOAD A->3, x=LOAD B->2, STORE B=4
STORE A=3, x=LOAD B->2, STORE B=4, y=LOAD A->3
STORE A=3, x=LOAD B->2, y=LOAD A->3, STORE B=4
STORE B=4, STORE A=3, y=LOAD A->3, x=LOAD B->4
STORE B=4, ...
...
and can thus result in four different combinations of values:
x == 2, y == 1
x == 2, y == 3
x == 4, y == 1
x == 4, y == 3
Furthermore, the stores committed by a CPU to the memory system may not be
perceived by the loads made by another CPU in the same order as the stores were
committed.
As a further example, consider this sequence of events:
CPU 1 CPU 2
=============== ===============
{ A == 1, B == 2, C == 3, P == &A, Q == &C }
B = 4; Q = P;
P = &B; D = *Q;
There is an obvious address dependency here, as the value loaded into D depends
on the address retrieved from P by CPU 2. At the end of the sequence, any of
the following results are possible:
(Q == &A) and (D == 1)
(Q == &B) and (D == 2)
(Q == &B) and (D == 4)
Note that CPU 2 will never try and load C into D because the CPU will load P
into Q before issuing the load of *Q.
DEVICE OPERATIONS
-----------------
Some devices present their control interfaces as collections of memory
locations, but the order in which the control registers are accessed is very
important. For instance, imagine an ethernet card with a set of internal
registers that are accessed through an address port register (A) and a data
port register (D). To read internal register 5, the following code might then
be used:
*A = 5;
x = *D;
but this might show up as either of the following two sequences:
STORE *A = 5, x = LOAD *D
x = LOAD *D, STORE *A = 5
the second of which will almost certainly result in a malfunction, since it set
the address _after_ attempting to read the register.
GUARANTEES
----------
There are some minimal guarantees that may be expected of a CPU:
(*) On any given CPU, dependent memory accesses will be issued in order, with
respect to itself. This means that for:
Q = READ_ONCE(P); D = READ_ONCE(*Q);
the CPU will issue the following memory operations:
Q = LOAD P, D = LOAD *Q
and always in that order. However, on DEC Alpha, READ_ONCE() also
emits a memory-barrier instruction, so that a DEC Alpha CPU will
instead issue the following memory operations:
Q = LOAD P, MEMORY_BARRIER, D = LOAD *Q, MEMORY_BARRIER
Whether on DEC Alpha or not, the READ_ONCE() also prevents compiler
mischief.
(*) Overlapping loads and stores within a particular CPU will appear to be
ordered within that CPU. This means that for:
a = READ_ONCE(*X); WRITE_ONCE(*X, b);
the CPU will only issue the following sequence of memory operations:
a = LOAD *X, STORE *X = b
And for:
WRITE_ONCE(*X, c); d = READ_ONCE(*X);
the CPU will only issue:
STORE *X = c, d = LOAD *X
(Loads and stores overlap if they are targeted at overlapping pieces of
memory).
And there are a number of things that _must_ or _must_not_ be assumed:
(*) It _must_not_ be assumed that the compiler will do what you want
with memory references that are not protected by READ_ONCE() and
WRITE_ONCE(). Without them, the compiler is within its rights to
do all sorts of "creative" transformations, which are covered in
the COMPILER BARRIER section.
(*) It _must_not_ be assumed that independent loads and stores will be issued
in the order given. This means that for:
X = *A; Y = *B; *D = Z;
we may get any of the following sequences:
X = LOAD *A, Y = LOAD *B, STORE *D = Z
X = LOAD *A, STORE *D = Z, Y = LOAD *B
Y = LOAD *B, X = LOAD *A, STORE *D = Z
Y = LOAD *B, STORE *D = Z, X = LOAD *A
STORE *D = Z, X = LOAD *A, Y = LOAD *B
STORE *D = Z, Y = LOAD *B, X = LOAD *A
(*) It _must_ be assumed that overlapping memory accesses may be merged or
discarded. This means that for:
X = *A; Y = *(A + 4);
we may get any one of the following sequences:
X = LOAD *A; Y = LOAD *(A + 4);
Y = LOAD *(A + 4); X = LOAD *A;
{X, Y} = LOAD {*A, *(A + 4) };
And for:
*A = X; *(A + 4) = Y;
we may get any of:
STORE *A = X; STORE *(A + 4) = Y;
STORE *(A + 4) = Y; STORE *A = X;
STORE {*A, *(A + 4) } = {X, Y};
And there are anti-guarantees:
(*) These guarantees do not apply to bitfields, because compilers often
generate code to modify these using non-atomic read-modify-write
sequences. Do not attempt to use bitfields to synchronize parallel
algorithms.
(*) Even in cases where bitfields are protected by locks, all fields
in a given bitfield must be protected by one lock. If two fields
in a given bitfield are protected by different locks, the compiler's
non-atomic read-modify-write sequences can cause an update to one
field to corrupt the value of an adjacent field.
(*) These guarantees apply only to properly aligned and sized scalar
variables. "Properly sized" currently means variables that are
the same size as "char", "short", "int" and "long". "Properly
aligned" means the natural alignment, thus no constraints for
"char", two-byte alignment for "short", four-byte alignment for
"int", and either four-byte or eight-byte alignment for "long",
on 32-bit and 64-bit systems, respectively. Note that these
guarantees were introduced into the C11 standard, so beware when
using older pre-C11 compilers (for example, gcc 4.6). The portion
of the standard containing this guarantee is Section 3.14, which
defines "memory location" as follows:
memory location
either an object of scalar type, or a maximal sequence
of adjacent bit-fields all having nonzero width
NOTE 1: Two threads of execution can update and access
separate memory locations without interfering with
each other.
NOTE 2: A bit-field and an adjacent non-bit-field member
are in separate memory locations. The same applies
to two bit-fields, if one is declared inside a nested
structure declaration and the other is not, or if the two
are separated by a zero-length bit-field declaration,
or if they are separated by a non-bit-field member
declaration. It is not safe to concurrently update two
bit-fields in the same structure if all members declared
between them are also bit-fields, no matter what the
sizes of those intervening bit-fields happen to be.
=========================
WHAT ARE MEMORY BARRIERS?
=========================
As can be seen above, independent memory operations are effectively performed
in random order, but this can be a problem for CPU-CPU interaction and for I/O.
What is required is some way of intervening to instruct the compiler and the
CPU to restrict the order.
Memory barriers are such interventions. They impose a perceived partial
ordering over the memory operations on either side of the barrier.
Such enforcement is important because the CPUs and other devices in a system
can use a variety of tricks to improve performance, including reordering,
deferral and combination of memory operations; speculative loads; speculative
branch prediction and various types of caching. Memory barriers are used to
override or suppress these tricks, allowing the code to sanely control the
interaction of multiple CPUs and/or devices.
VARIETIES OF MEMORY BARRIER
---------------------------
Memory barriers come in four basic varieties:
(1) Write (or store) memory barriers.
A write memory barrier gives a guarantee that all the STORE operations
specified before the barrier will appear to happen before all the STORE
operations specified after the barrier with respect to the other
components of the system.
A write barrier is a partial ordering on stores only; it is not required
to have any effect on loads.
A CPU can be viewed as committing a sequence of store operations to the
memory system as time progresses. All stores _before_ a write barrier
will occur _before_ all the stores after the write barrier.
[!] Note that write barriers should normally be paired with read or
address-dependency barriers; see the "SMP barrier pairing" subsection.
(2) Address-dependency barriers (historical).
An address-dependency barrier is a weaker form of read barrier. In the
case where two loads are performed such that the second depends on the
result of the first (eg: the first load retrieves the address to which
the second load will be directed), an address-dependency barrier would
be required to make sure that the target of the second load is updated
after the address obtained by the first load is accessed.
An address-dependency barrier is a partial ordering on interdependent
loads only; it is not required to have any effect on stores, independent
loads or overlapping loads.
As mentioned in (1), the other CPUs in the system can be viewed as
committing sequences of stores to the memory system that the CPU being
considered can then perceive. An address-dependency barrier issued by
the CPU under consideration guarantees that for any load preceding it,
if that load touches one of a sequence of stores from another CPU, then
by the time the barrier completes, the effects of all the stores prior to
that touched by the load will be perceptible to any loads issued after
the address-dependency barrier.
See the "Examples of memory barrier sequences" subsection for diagrams
showing the ordering constraints.
[!] Note that the first load really has to have an _address_ dependency and
not a control dependency. If the address for the second load is dependent
on the first load, but the dependency is through a conditional rather than
actually loading the address itself, then it's a _control_ dependency and
a full read barrier or better is required. See the "Control dependencies"
subsection for more information.
[!] Note that address-dependency barriers should normally be paired with
write barriers; see the "SMP barrier pairing" subsection.
[!] Kernel release v5.9 removed kernel APIs for explicit address-
dependency barriers. Nowadays, APIs for marking loads from shared
variables such as READ_ONCE() and rcu_dereference() provide implicit
address-dependency barriers.
(3) Read (or load) memory barriers.
A read barrier is an address-dependency barrier plus a guarantee that all
the LOAD operations specified before the barrier will appear to happen
before all the LOAD operations specified after the barrier with respect to
the other components of the system.
A read barrier is a partial ordering on loads only; it is not required to
have any effect on stores.
Read memory barriers imply address-dependency barriers, and so can
substitute for them.
[!] Note that read barriers should normally be paired with write barriers;
see the "SMP barrier pairing" subsection.
(4) General memory barriers.
A general memory barrier gives a guarantee that all the LOAD and STORE
operations specified before the barrier will appear to happen before all
the LOAD and STORE operations specified after the barrier with respect to
the other components of the system.
A general memory barrier is a partial ordering over both loads and stores.
General memory barriers imply both read and write memory barriers, and so
can substitute for either.
And a couple of implicit varieties:
(5) ACQUIRE operations.
This acts as a one-way permeable barrier. It guarantees that all memory
operations after the ACQUIRE operation will appear to happen after the
ACQUIRE operation with respect to the other components of the system.
ACQUIRE operations include LOCK operations and both smp_load_acquire()
and smp_cond_load_acquire() operations.
Memory operations that occur before an ACQUIRE operation may appear to
happen after it completes.
An ACQUIRE operation should almost always be paired with a RELEASE
operation.
(6) RELEASE operations.
This also acts as a one-way permeable barrier. It guarantees that all
memory operations before the RELEASE operation will appear to happen
before the RELEASE operation with respect to the other components of the
system. RELEASE operations include UNLOCK operations and
smp_store_release() operations.
Memory operations that occur after a RELEASE operation may appear to
happen before it completes.
The use of ACQUIRE and RELEASE operations generally precludes the need
for other sorts of memory barrier. In addition, a RELEASE+ACQUIRE pair is
-not- guaranteed to act as a full memory barrier. However, after an
ACQUIRE on a given variable, all memory accesses preceding any prior
RELEASE on that same variable are guaranteed to be visible. In other
words, within a given variable's critical section, all accesses of all
previous critical sections for that variable are guaranteed to have
completed.
This means that ACQUIRE acts as a minimal "acquire" operation and
RELEASE acts as a minimal "release" operation.
A subset of the atomic operations described in atomic_t.txt have ACQUIRE and
RELEASE variants in addition to fully-ordered and relaxed (no barrier
semantics) definitions. For compound atomics performing both a load and a
store, ACQUIRE semantics apply only to the load and RELEASE semantics apply
only to the store portion of the operation.
Memory barriers are only required where there's a possibility of interaction
between two CPUs or between a CPU and a device. If it can be guaranteed that
there won't be any such interaction in any particular piece of code, then
memory barriers are unnecessary in that piece of code.
Note that these are the _minimum_ guarantees. Different architectures may give
more substantial guarantees, but they may _not_ be relied upon outside of arch
specific code.
WHAT MAY NOT BE ASSUMED ABOUT MEMORY BARRIERS?
----------------------------------------------
There are certain things that the Linux kernel memory barriers do not guarantee:
(*) There is no guarantee that any of the memory accesses specified before a
memory barrier will be _complete_ by the completion of a memory barrier
instruction; the barrier can be considered to draw a line in that CPU's
access queue that accesses of the appropriate type may not cross.
(*) There is no guarantee that issuing a memory barrier on one CPU will have
any direct effect on another CPU or any other hardware in the system. The
indirect effect will be the order in which the second CPU sees the effects
of the first CPU's accesses occur, but see the next point:
(*) There is no guarantee that a CPU will see the correct order of effects
from a second CPU's accesses, even _if_ the second CPU uses a memory
barrier, unless the first CPU _also_ uses a matching memory barrier (see
the subsection on "SMP Barrier Pairing").
(*) There is no guarantee that some intervening piece of off-the-CPU
hardware[*] will not reorder the memory accesses. CPU cache coherency
mechanisms should propagate the indirect effects of a memory barrier
between CPUs, but might not do so in order.
[*] For information on bus mastering DMA and coherency please read:
Documentation/driver-api/pci/pci.rst
Documentation/core-api/dma-api-howto.rst
Documentation/core-api/dma-api.rst
ADDRESS-DEPENDENCY BARRIERS (HISTORICAL)
----------------------------------------
As of v4.15 of the Linux kernel, an smp_mb() was added to READ_ONCE() for
DEC Alpha, which means that about the only people who need to pay attention
to this section are those working on DEC Alpha architecture-specific code
and those working on READ_ONCE() itself. For those who need it, and for
those who are interested in the history, here is the story of
address-dependency barriers.
[!] While address dependencies are observed in both load-to-load and
load-to-store relations, address-dependency barriers are not necessary
for load-to-store situations.
The requirement of address-dependency barriers is a little subtle, and
it's not always obvious that they're needed. To illustrate, consider the
following sequence of events:
CPU 1 CPU 2
=============== ===============
{ A == 1, B == 2, C == 3, P == &A, Q == &C }
B = 4;
<write barrier>
WRITE_ONCE(P, &B);
Q = READ_ONCE_OLD(P);
D = *Q;
[!] READ_ONCE_OLD() corresponds to READ_ONCE() of pre-4.15 kernel, which
doesn't imply an address-dependency barrier.
There's a clear address dependency here, and it would seem that by the end of
the sequence, Q must be either &A or &B, and that:
(Q == &A) implies (D == 1)
(Q == &B) implies (D == 4)
But! CPU 2's perception of P may be updated _before_ its perception of B, thus
leading to the following situation:
(Q == &B) and (D == 2) ????
While this may seem like a failure of coherency or causality maintenance, it
isn't, and this behaviour can be observed on certain real CPUs (such as the DEC
Alpha).
To deal with this, READ_ONCE() provides an implicit address-dependency barrier
since kernel release v4.15:
CPU 1 CPU 2
=============== ===============
{ A == 1, B == 2, C == 3, P == &A, Q == &C }
B = 4;
<write barrier>
WRITE_ONCE(P, &B);
Q = READ_ONCE(P);
<implicit address-dependency barrier>
D = *Q;
This enforces the occurrence of one of the two implications, and prevents the
third possibility from arising.
[!] Note that this extremely counterintuitive situation arises most easily on
machines with split caches, so that, for example, one cache bank processes
even-numbered cache lines and the other bank processes odd-numbered cache
lines. The pointer P might be stored in an odd-numbered cache line, and the
variable B might be stored in an even-numbered cache line. Then, if the
even-numbered bank of the reading CPU's cache is extremely busy while the
odd-numbered bank is idle, one can see the new value of the pointer P (&B),
but the old value of the variable B (2).
An address-dependency barrier is not required to order dependent writes
because the CPUs that the Linux kernel supports don't do writes until they
are certain (1) that the write will actually happen, (2) of the location of
the write, and (3) of the value to be written.
But please carefully read the "CONTROL DEPENDENCIES" section and the
Documentation/RCU/rcu_dereference.rst file: The compiler can and does break
dependencies in a great many highly creative ways.
CPU 1 CPU 2
=============== ===============
{ A == 1, B == 2, C = 3, P == &A, Q == &C }
B = 4;
<write barrier>
WRITE_ONCE(P, &B);
Q = READ_ONCE_OLD(P);
WRITE_ONCE(*Q, 5);
Therefore, no address-dependency barrier is required to order the read into
Q with the store into *Q. In other words, this outcome is prohibited,
even without an implicit address-dependency barrier of modern READ_ONCE():
(Q == &B) && (B == 4)
Please note that this pattern should be rare. After all, the whole point
of dependency ordering is to -prevent- writes to the data structure, along
with the expensive cache misses associated with those writes. This pattern
can be used to record rare error conditions and the like, and the CPUs'
naturally occurring ordering prevents such records from being lost.
Note well that the ordering provided by an address dependency is local to
the CPU containing it. See the section on "Multicopy atomicity" for
more information.
The address-dependency barrier is very important to the RCU system,
for example. See rcu_assign_pointer() and rcu_dereference() in
include/linux/rcupdate.h. This permits the current target of an RCU'd
pointer to be replaced with a new modified target, without the replacement
target appearing to be incompletely initialised.
See also the subsection on "Cache Coherency" for a more thorough example.
CONTROL DEPENDENCIES
--------------------
Control dependencies can be a bit tricky because current compilers do
not understand them. The purpose of this section is to help you prevent
the compiler's ignorance from breaking your code.
A load-load control dependency requires a full read memory barrier, not
simply an (implicit) address-dependency barrier to make it work correctly.
Consider the following bit of code:
q = READ_ONCE(a);
<implicit address-dependency barrier>
if (q) {
/* BUG: No address dependency!!! */
p = READ_ONCE(b);
}
This will not have the desired effect because there is no actual address
dependency, but rather a control dependency that the CPU may short-circuit
by attempting to predict the outcome in advance, so that other CPUs see
the load from b as having happened before the load from a. In such a case
what's actually required is:
q = READ_ONCE(a);
if (q) {
<read barrier>
p = READ_ONCE(b);
}
However, stores are not speculated. This means that ordering -is- provided
for load-store control dependencies, as in the following example:
q = READ_ONCE(a);
if (q) {
WRITE_ONCE(b, 1);
}
Control dependencies pair normally with other types of barriers.
That said, please note that neither READ_ONCE() nor WRITE_ONCE()
are optional! Without the READ_ONCE(), the compiler might combine the
load from 'a' with other loads from 'a'. Without the WRITE_ONCE(),
the compiler might combine the store to 'b' with other stores to 'b'.
Either can result in highly counterintuitive effects on ordering.
Worse yet, if the compiler is able to prove (say) that the value of
variable 'a' is always non-zero, it would be well within its rights
to optimize the original example by eliminating the "if" statement
as follows:
q = a;
b = 1; /* BUG: Compiler and CPU can both reorder!!! */
So don't leave out the READ_ONCE().
It is tempting to try to enforce ordering on identical stores on both
branches of the "if" statement as follows:
q = READ_ONCE(a);
if (q) {
barrier();
WRITE_ONCE(b, 1);
do_something();
} else {
barrier();
WRITE_ONCE(b, 1);
do_something_else();
}
Unfortunately, current compilers will transform this as follows at high
optimization levels:
q = READ_ONCE(a);
barrier();
WRITE_ONCE(b, 1); /* BUG: No ordering vs. load from a!!! */
if (q) {
/* WRITE_ONCE(b, 1); -- moved up, BUG!!! */
do_something();
} else {
/* WRITE_ONCE(b, 1); -- moved up, BUG!!! */
do_something_else();
}
Now there is no conditional between the load from 'a' and the store to
'b', which means that the CPU is within its rights to reorder them:
The conditional is absolutely required, and must be present in the
assembly code even after all compiler optimizations have been applied.
Therefore, if you need ordering in this example, you need explicit
memory barriers, for example, smp_store_release():
q = READ_ONCE(a);
if (q) {
smp_store_release(&b, 1);
do_something();
} else {
smp_store_release(&b, 1);
do_something_else();
}
In contrast, without explicit memory barriers, two-legged-if control
ordering is guaranteed only when the stores differ, for example:
q = READ_ONCE(a);
if (q) {
WRITE_ONCE(b, 1);
do_something();
} else {
WRITE_ONCE(b, 2);
do_something_else();
}
The initial READ_ONCE() is still required to prevent the compiler from
proving the value of 'a'.
In addition, you need to be careful what you do with the local variable 'q',
otherwise the compiler might be able to guess the value and again remove
the needed conditional. For example:
q = READ_ONCE(a);
if (q % MAX) {
WRITE_ONCE(b, 1);
do_something();
} else {
WRITE_ONCE(b, 2);
do_something_else();
}
If MAX is defined to be 1, then the compiler knows that (q % MAX) is
equal to zero, in which case the compiler is within its rights to
transform the above code into the following:
q = READ_ONCE(a);
WRITE_ONCE(b, 2);
do_something_else();
Given this transformation, the CPU is not required to respect the ordering
between the load from variable 'a' and the store to variable 'b'. It is
tempting to add a barrier(), but this does not help. The conditional
is gone, and the barrier won't bring it back. Therefore, if you are
relying on this ordering, you should make sure that MAX is greater than
one, perhaps as follows:
q = READ_ONCE(a);
BUILD_BUG_ON(MAX <= 1); /* Order load from a with store to b. */
if (q % MAX) {
WRITE_ONCE(b, 1);
do_something();
} else {
WRITE_ONCE(b, 2);
do_something_else();
}
Please note once again that the stores to 'b' differ. If they were
identical, as noted earlier, the compiler could pull this store outside
of the 'if' statement.
You must also be careful not to rely too much on boolean short-circuit
evaluation. Consider this example:
q = READ_ONCE(a);
if (q || 1 > 0)
WRITE_ONCE(b, 1);
Because the first condition cannot fault and the second condition is
always true, the compiler can transform this example as following,
defeating control dependency:
q = READ_ONCE(a);
WRITE_ONCE(b, 1);
This example underscores the need to ensure that the compiler cannot
out-guess your code. More generally, although READ_ONCE() does force
the compiler to actually emit code for a given load, it does not force
the compiler to use the results.
In addition, control dependencies apply only to the then-clause and
else-clause of the if-statement in question. In particular, it does
not necessarily apply to code following the if-statement:
q = READ_ONCE(a);
if (q) {
WRITE_ONCE(b, 1);
} else {
WRITE_ONCE(b, 2);
}
WRITE_ONCE(c, 1); /* BUG: No ordering against the read from 'a'. */
It is tempting to argue that there in fact is ordering because the
compiler cannot reorder volatile accesses and also cannot reorder
the writes to 'b' with the condition. Unfortunately for this line
of reasoning, the compiler might compile the two writes to 'b' as
conditional-move instructions, as in this fanciful pseudo-assembly
language:
ld r1,a
cmp r1,$0
cmov,ne r4,$1
cmov,eq r4,$2
st r4,b
st $1,c
A weakly ordered CPU would have no dependency of any sort between the load
from 'a' and the store to 'c'. The control dependencies would extend
only to the pair of cmov instructions and the store depending on them.
In short, control dependencies apply only to the stores in the then-clause
and else-clause of the if-statement in question (including functions
invoked by those two clauses), not to code following that if-statement.
Note well that the ordering provided by a control dependency is local
to the CPU containing it. See the section on "Multicopy atomicity"
for more information.
In summary:
(*) Control dependencies can order prior loads against later stores.
However, they do -not- guarantee any other sort of ordering:
Not prior loads against later loads, nor prior stores against
later anything. If you need these other forms of ordering,
use smp_rmb(), smp_wmb(), or, in the case of prior stores and
later loads, smp_mb().
(*) If both legs of the "if" statement begin with identical stores to
the same variable, then those stores must be ordered, either by
preceding both of them with smp_mb() or by using smp_store_release()
to carry out the stores. Please note that it is -not- sufficient
to use barrier() at beginning of each leg of the "if" statement
because, as shown by the example above, optimizing compilers can
destroy the control dependency while respecting the letter of the
barrier() law.
(*) Control dependencies require at least one run-time conditional
between the prior load and the subsequent store, and this
conditional must involve the prior load. If the compiler is able
to optimize the conditional away, it will have also optimized
away the ordering. Careful use of READ_ONCE() and WRITE_ONCE()
can help to preserve the needed conditional.
(*) Control dependencies require that the compiler avoid reordering the
dependency into nonexistence. Careful use of READ_ONCE() or
atomic{,64}_read() can help to preserve your control dependency.
Please see the COMPILER BARRIER section for more information.
(*) Control dependencies apply only to the then-clause and else-clause
of the if-statement containing the control dependency, including
any functions that these two clauses call. Control dependencies
do -not- apply to code following the if-statement containing the
control dependency.
(*) Control dependencies pair normally with other types of barriers.
(*) Control dependencies do -not- provide multicopy atomicity. If you
need all the CPUs to see a given store at the same time, use smp_mb().
(*) Compilers do not understand control dependencies. It is therefore
your job to ensure that they do not break your code.
SMP BARRIER PAIRING
-------------------
When dealing with CPU-CPU interactions, certain types of memory barrier should
always be paired. A lack of appropriate pairing is almost certainly an error.
General barriers pair with each other, though they also pair with most
other types of barriers, albeit without multicopy atomicity. An acquire
barrier pairs with a release barrier, but both may also pair with other
barriers, including of course general barriers. A write barrier pairs
with an address-dependency barrier, a control dependency, an acquire barrier,
a release barrier, a read barrier, or a general barrier. Similarly a
read barrier, control dependency, or an address-dependency barrier pairs
with a write barrier, an acquire barrier, a release barrier, or a
general barrier:
CPU 1 CPU 2
=============== ===============
WRITE_ONCE(a, 1);
<write barrier>
WRITE_ONCE(b, 2); x = READ_ONCE(b);
<read barrier>
y = READ_ONCE(a);
Or:
CPU 1 CPU 2
=============== ===============================
a = 1;
<write barrier>
WRITE_ONCE(b, &a); x = READ_ONCE(b);
<implicit address-dependency barrier>
y = *x;
Or even:
CPU 1 CPU 2
=============== ===============================
r1 = READ_ONCE(y);
<general barrier>
WRITE_ONCE(x, 1); if (r2 = READ_ONCE(x)) {
<implicit control dependency>
WRITE_ONCE(y, 1);
}
assert(r1 == 0 || r2 == 0);
Basically, the read barrier always has to be there, even though it can be of
the "weaker" type.
[!] Note that the stores before the write barrier would normally be expected to
match the loads after the read barrier or the address-dependency barrier, and
vice versa:
CPU 1 CPU 2
=================== ===================
WRITE_ONCE(a, 1); }---- --->{ v = READ_ONCE(c);
WRITE_ONCE(b, 2); } \ / { w = READ_ONCE(d);
<write barrier> \ <read barrier>
WRITE_ONCE(c, 3); } / \ { x = READ_ONCE(a);
WRITE_ONCE(d, 4); }---- --->{ y = READ_ONCE(b);
EXAMPLES OF MEMORY BARRIER SEQUENCES
------------------------------------
Firstly, write barriers act as partial orderings on store operations.
Consider the following sequence of events:
CPU 1
=======================
STORE A = 1
STORE B = 2
STORE C = 3
<write barrier>
STORE D = 4
STORE E = 5
This sequence of events is committed to the memory coherence system in an order
that the rest of the system might perceive as the unordered set of { STORE A,
STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E
}:
+-------+ : :
| | +------+
| |------>| C=3 | } /\
| | : +------+ }----- \ -----> Events perceptible to
| | : | A=1 | } \/ the rest of the system
| | : +------+ }
| CPU 1 | : | B=2 | }
| | +------+ }
| | wwwwwwwwwwwwwwww } <--- At this point the write barrier
| | +------+ } requires all stores prior to the
| | : | E=5 | } barrier to be committed before
| | : +------+ } further stores may take place
| |------>| D=4 | }
| | +------+
+-------+ : :
|
| Sequence in which stores are committed to the
| memory system by CPU 1
V
Secondly, address-dependency barriers act as partial orderings on address-
dependent loads. Consider the following sequence of events:
CPU 1 CPU 2
======================= =======================
{ B = 7; X = 9; Y = 8; C = &Y }
STORE A = 1
STORE B = 2
<write barrier>
STORE C = &B LOAD X
STORE D = 4 LOAD C (gets &B)
LOAD *C (reads B)
Without intervention, CPU 2 may perceive the events on CPU 1 in some
effectively random order, despite the write barrier issued by CPU 1:
+-------+ : : : :
| | +------+ +-------+ | Sequence of update
| |------>| B=2 |----- --->| Y->8 | | of perception on
| | : +------+ \ +-------+ | CPU 2
| CPU 1 | : | A=1 | \ --->| C->&Y | V
| | +------+ | +-------+
| | wwwwwwwwwwwwwwww | : :
| | +------+ | : :
| | : | C=&B |--- | : : +-------+
| | : +------+ \ | +-------+ | |
| |------>| D=4 | ----------->| C->&B |------>| |
| | +------+ | +-------+ | |
+-------+ : : | : : | |
| : : | |
| : : | CPU 2 |
| +-------+ | |
Apparently incorrect ---> | | B->7 |------>| |
perception of B (!) | +-------+ | |
| : : | |
| +-------+ | |
The load of X holds ---> \ | X->9 |------>| |
up the maintenance \ +-------+ | |
of coherence of B ----->| B->2 | +-------+
+-------+
: :
In the above example, CPU 2 perceives that B is 7, despite the load of *C
(which would be B) coming after the LOAD of C.
If, however, an address-dependency barrier were to be placed between the load
of C and the load of *C (ie: B) on CPU 2:
CPU 1 CPU 2
======================= =======================
{ B = 7; X = 9; Y = 8; C = &Y }
STORE A = 1
STORE B = 2
<write barrier>
STORE C = &B LOAD X
STORE D = 4 LOAD C (gets &B)
<address-dependency barrier>
LOAD *C (reads B)
then the following will occur:
+-------+ : : : :
| | +------+ +-------+
| |------>| B=2 |----- --->| Y->8 |
| | : +------+ \ +-------+
| CPU 1 | : | A=1 | \ --->| C->&Y |
| | +------+ | +-------+
| | wwwwwwwwwwwwwwww | : :
| | +------+ | : :
| | : | C=&B |--- | : : +-------+
| | : +------+ \ | +-------+ | |
| |------>| D=4 | ----------->| C->&B |------>| |
| | +------+ | +-------+ | |
+-------+ : : | : : | |
| : : | |
| : : | CPU 2 |
| +-------+ | |
| | X->9 |------>| |
| +-------+ | |
Makes sure all effects ---> \ aaaaaaaaaaaaaaaaa | |
prior to the store of C \ +-------+ | |
are perceptible to ----->| B->2 |------>| |
subsequent loads +-------+ | |
: : +-------+
And thirdly, a read barrier acts as a partial order on loads. Consider the
following sequence of events:
CPU 1 CPU 2
======================= =======================
{ A = 0, B = 9 }
STORE A=1
<write barrier>
STORE B=2
LOAD B
LOAD A
Without intervention, CPU 2 may then choose to perceive the events on CPU 1 in
some effectively random order, despite the write barrier issued by CPU 1:
+-------+ : : : :
| | +------+ +-------+
| |------>| A=1 |------ --->| A->0 |
| | +------+ \ +-------+
| CPU 1 | wwwwwwwwwwwwwwww \ --->| B->9 |
| | +------+ | +-------+
| |------>| B=2 |--- | : :
| | +------+ \ | : : +-------+
+-------+ : : \ | +-------+ | |
---------->| B->2 |------>| |
| +-------+ | CPU 2 |
| | A->0 |------>| |
| +-------+ | |
| : : +-------+
\ : :
\ +-------+
---->| A->1 |
+-------+
: :
If, however, a read barrier were to be placed between the load of B and the
load of A on CPU 2:
CPU 1 CPU 2
======================= =======================
{ A = 0, B = 9 }
STORE A=1
<write barrier>
STORE B=2
LOAD B
<read barrier>
LOAD A
then the partial ordering imposed by CPU 1 will be perceived correctly by CPU
2:
+-------+ : : : :
| | +------+ +-------+
| |------>| A=1 |------ --->| A->0 |
| | +------+ \ +-------+
| CPU 1 | wwwwwwwwwwwwwwww \ --->| B->9 |
| | +------+ | +-------+
| |------>| B=2 |--- | : :
| | +------+ \ | : : +-------+
+-------+ : : \ | +-------+ | |
---------->| B->2 |------>| |
| +-------+ | CPU 2 |
| : : | |
| : : | |
At this point the read ----> \ rrrrrrrrrrrrrrrrr | |
barrier causes all effects \ +-------+ | |
prior to the storage of B ---->| A->1 |------>| |
to be perceptible to CPU 2 +-------+ | |
: : +-------+
To illustrate this more completely, consider what could happen if the code
contained a load of A either side of the read barrier:
CPU 1 CPU 2
======================= =======================
{ A = 0, B = 9 }
STORE A=1
<write barrier>
STORE B=2
LOAD B
LOAD A [first load of A]
<read barrier>
LOAD A [second load of A]
Even though the two loads of A both occur after the load of B, they may both
come up with different values:
+-------+ : : : :
| | +------+ +-------+
| |------>| A=1 |------ --->| A->0 |
| | +------+ \ +-------+
| CPU 1 | wwwwwwwwwwwwwwww \ --->| B->9 |
| | +------+ | +-------+
| |------>| B=2 |--- | : :
| | +------+ \ | : : +-------+
+-------+ : : \ | +-------+ | |
---------->| B->2 |------>| |
| +-------+ | CPU 2 |
| : : | |
| : : | |
| +-------+ | |
| | A->0 |------>| 1st |
| +-------+ | |
At this point the read ----> \ rrrrrrrrrrrrrrrrr | |
barrier causes all effects \ +-------+ | |
prior to the storage of B ---->| A->1 |------>| 2nd |
to be perceptible to CPU 2 +-------+ | |
: : +-------+
But it may be that the update to A from CPU 1 becomes perceptible to CPU 2
before the read barrier completes anyway:
+-------+ : : : :
| | +------+ +-------+
| |------>| A=1 |------ --->| A->0 |
| | +------+ \ +-------+
| CPU 1 | wwwwwwwwwwwwwwww \ --->| B->9 |
| | +------+ | +-------+
| |------>| B=2 |--- | : :
| | +------+ \ | : : +-------+
+-------+ : : \ | +-------+ | |
---------->| B->2 |------>| |
| +-------+ | CPU 2 |
| : : | |
\ : : | |
\ +-------+ | |
---->| A->1 |------>| 1st |
+-------+ | |
rrrrrrrrrrrrrrrrr | |
+-------+ | |
| A->1 |------>| 2nd |
+-------+ | |
: : +-------+
The guarantee is that the second load will always come up with A == 1 if the
load of B came up with B == 2. No such guarantee exists for the first load of
A; that may come up with either A == 0 or A == 1.
READ MEMORY BARRIERS VS LOAD SPECULATION
----------------------------------------
Many CPUs speculate with loads: that is they see that they will need to load an
item from memory, and they find a time where they're not using the bus for any
other loads, and so do the load in advance - even though they haven't actually
got to that point in the instruction execution flow yet. This permits the
actual load instruction to potentially complete immediately because the CPU
already has the value to hand.
It may turn out that the CPU didn't actually need the value - perhaps because a
branch circumvented the load - in which case it can discard the value or just
cache it for later use.
Consider:
CPU 1 CPU 2
======================= =======================
LOAD B
DIVIDE } Divide instructions generally
DIVIDE } take a long time to perform
LOAD A
Which might appear as this:
: : +-------+
+-------+ | |
--->| B->2 |------>| |
+-------+ | CPU 2 |
: :DIVIDE | |
+-------+ | |
The CPU being busy doing a ---> --->| A->0 |~~~~ | |
division speculates on the +-------+ ~ | |
LOAD of A : : ~ | |
: :DIVIDE | |
: : ~ | |
Once the divisions are complete --> : : ~-->| |
the CPU can then perform the : : | |
LOAD with immediate effect : : +-------+
Placing a read barrier or an address-dependency barrier just before the second
load:
CPU 1 CPU 2
======================= =======================
LOAD B
DIVIDE
DIVIDE
<read barrier>
LOAD A
will force any value speculatively obtained to be reconsidered to an extent
dependent on the type of barrier used. If there was no change made to the
speculated memory location, then the speculated value will just be used:
: : +-------+
+-------+ | |
--->| B->2 |------>| |
+-------+ | CPU 2 |
: :DIVIDE | |
+-------+ | |
The CPU being busy doing a ---> --->| A->0 |~~~~ | |
division speculates on the +-------+ ~ | |
LOAD of A : : ~ | |
: :DIVIDE | |
: : ~ | |
: : ~ | |
rrrrrrrrrrrrrrrr~ | |
: : ~ | |
: : ~-->| |
: : | |
: : +-------+
but if there was an update or an invalidation from another CPU pending, then
the speculation will be cancelled and the value reloaded:
: : +-------+
+-------+ | |
--->| B->2 |------>| |
+-------+ | CPU 2 |
: :DIVIDE | |
+-------+ | |
The CPU being busy doing a ---> --->| A->0 |~~~~ | |
division speculates on the +-------+ ~ | |
LOAD of A : : ~ | |
: :DIVIDE | |
: : ~ | |
: : ~ | |
rrrrrrrrrrrrrrrrr | |
+-------+ | |
The speculation is discarded ---> --->| A->1 |------>| |
and an updated value is +-------+ | |
retrieved : : +-------+
MULTICOPY ATOMICITY
--------------------
Multicopy atomicity is a deeply intuitive notion about ordering that is
not always provided by real computer systems, namely that a given store
becomes visible at the same time to all CPUs, or, alternatively, that all
CPUs agree on the order in which all stores become visible. However,
support of full multicopy atomicity would rule out valuable hardware
optimizations, so a weaker form called ``other multicopy atomicity''
instead guarantees only that a given store becomes visible at the same
time to all -other- CPUs. The remainder of this document discusses this
weaker form, but for brevity will call it simply ``multicopy atomicity''.
The following example demonstrates multicopy atomicity:
CPU 1 CPU 2 CPU 3
======================= ======================= =======================
{ X = 0, Y = 0 }
STORE X=1 r1=LOAD X (reads 1) LOAD Y (reads 1)
<general barrier> <read barrier>
STORE Y=r1 LOAD X
Suppose that CPU 2's load from X returns 1, which it then stores to Y,
and CPU 3's load from Y returns 1. This indicates that CPU 1's store
to X precedes CPU 2's load from X and that CPU 2's store to Y precedes
CPU 3's load from Y. In addition, the memory barriers guarantee that
CPU 2 executes its load before its store, and CPU 3 loads from Y before
it loads from X. The question is then "Can CPU 3's load from X return 0?"
Because CPU 3's load from X in some sense comes after CPU 2's load, it
is natural to expect that CPU 3's load from X must therefore return 1.
This expectation follows from multicopy atomicity: if a load executing
on CPU B follows a load from the same variable executing on CPU A (and
CPU A did not originally store the value which it read), then on
multicopy-atomic systems, CPU B's load must return either the same value
that CPU A's load did or some later value. However, the Linux kernel
does not require systems to be multicopy atomic.
The use of a general memory barrier in the example above compensates
for any lack of multicopy atomicity. In the example, if CPU 2's load
from X returns 1 and CPU 3's load from Y returns 1, then CPU 3's load
from X must indeed also return 1.
However, dependencies, read barriers, and write barriers are not always
able to compensate for non-multicopy atomicity. For example, suppose
that CPU 2's general barrier is removed from the above example, leaving
only the data dependency shown below:
CPU 1 CPU 2 CPU 3
======================= ======================= =======================
{ X = 0, Y = 0 }
STORE X=1 r1=LOAD X (reads 1) LOAD Y (reads 1)
<data dependency> <read barrier>
STORE Y=r1 LOAD X (reads 0)
This substitution allows non-multicopy atomicity to run rampant: in
this example, it is perfectly legal for CPU 2's load from X to return 1,
CPU 3's load from Y to return 1, and its load from X to return 0.
The key point is that although CPU 2's data dependency orders its load
and store, it does not guarantee to order CPU 1's store. Thus, if this
example runs on a non-multicopy-atomic system where CPUs 1 and 2 share a
store buffer or a level of cache, CPU 2 might have early access to CPU 1's
writes. General barriers are therefore required to ensure that all CPUs
agree on the combined order of multiple accesses.
General barriers can compensate not only for non-multicopy atomicity,
but can also generate additional ordering that can ensure that -all-
CPUs will perceive the same order of -all- operations. In contrast, a
chain of release-acquire pairs do not provide this additional ordering,
which means that only those CPUs on the chain are guaranteed to agree
on the combined order of the accesses. For example, switching to C code
in deference to the ghost of Herman Hollerith:
int u, v, x, y, z;
void cpu0(void)
{
r0 = smp_load_acquire(&x);
WRITE_ONCE(u, 1);
smp_store_release(&y, 1);
}
void cpu1(void)
{
r1 = smp_load_acquire(&y);
r4 = READ_ONCE(v);
r5 = READ_ONCE(u);
smp_store_release(&z, 1);
}
void cpu2(void)
{
r2 = smp_load_acquire(&z);
smp_store_release(&x, 1);
}
void cpu3(void)
{
WRITE_ONCE(v, 1);
smp_mb();
r3 = READ_ONCE(u);
}
Because cpu0(), cpu1(), and cpu2() participate in a chain of
smp_store_release()/smp_load_acquire() pairs, the following outcome
is prohibited:
r0 == 1 && r1 == 1 && r2 == 1
Furthermore, because of the release-acquire relationship between cpu0()
and cpu1(), cpu1() must see cpu0()'s writes, so that the following
outcome is prohibited:
r1 == 1 && r5 == 0
However, the ordering provided by a release-acquire chain is local
to the CPUs participating in that chain and does not apply to cpu3(),
at least aside from stores. Therefore, the following outcome is possible:
r0 == 0 && r1 == 1 && r2 == 1 && r3 == 0 && r4 == 0
As an aside, the following outcome is also possible:
r0 == 0 && r1 == 1 && r2 == 1 && r3 == 0 && r4 == 0 && r5 == 1
Although cpu0(), cpu1(), and cpu2() will see their respective reads and
writes in order, CPUs not involved in the release-acquire chain might
well disagree on the order. This disagreement stems from the fact that
the weak memory-barrier instructions used to implement smp_load_acquire()
and smp_store_release() are not required to order prior stores against
subsequent loads in all cases. This means that cpu3() can see cpu0()'s
store to u as happening -after- cpu1()'s load from v, even though
both cpu0() and cpu1() agree that these two operations occurred in the
intended order.
However, please keep in mind that smp_load_acquire() is not magic.
In particular, it simply reads from its argument with ordering. It does
-not- ensure that any particular value will be read. Therefore, the
following outcome is possible:
r0 == 0 && r1 == 0 && r2 == 0 && r5 == 0
Note that this outcome can happen even on a mythical sequentially
consistent system where nothing is ever reordered.
To reiterate, if your code requires full ordering of all operations,
use general barriers throughout.
========================
EXPLICIT KERNEL BARRIERS
========================
The Linux kernel has a variety of different barriers that act at different
levels:
(*) Compiler barrier.
(*) CPU memory barriers.
COMPILER BARRIER
----------------
The Linux kernel has an explicit compiler barrier function that prevents the
compiler from moving the memory accesses either side of it to the other side:
barrier();
This is a general barrier -- there are no read-read or write-write
variants of barrier(). However, READ_ONCE() and WRITE_ONCE() can be
thought of as weak forms of barrier() that affect only the specific
accesses flagged by the READ_ONCE() or WRITE_ONCE().
The barrier() function has the following effects:
(*) Prevents the compiler from reordering accesses following the
barrier() to precede any accesses preceding the barrier().
One example use for this property is to ease communication between
interrupt-handler code and the code that was interrupted.
(*) Within a loop, forces the compiler to load the variables used
in that loop's conditional on each pass through that loop.
The READ_ONCE() and WRITE_ONCE() functions can prevent any number of
optimizations that, while perfectly safe in single-threaded code, can
be fatal in concurrent code. Here are some examples of these sorts
of optimizations:
(*) The compiler is within its rights to reorder loads and stores
to the same variable, and in some cases, the CPU is within its
rights to reorder loads to the same variable. This means that
the following code:
a[0] = x;
a[1] = x;
Might result in an older value of x stored in a[1] than in a[0].
Prevent both the compiler and the CPU from doing this as follows:
a[0] = READ_ONCE(x);
a[1] = READ_ONCE(x);
In short, READ_ONCE() and WRITE_ONCE() provide cache coherence for
accesses from multiple CPUs to a single variable.
(*) The compiler is within its rights to merge successive loads from
the same variable. Such merging can cause the compiler to "optimize"
the following code:
while (tmp = a)
do_something_with(tmp);
into the following code, which, although in some sense legitimate
for single-threaded code, is almost certainly not what the developer
intended:
if (tmp = a)
for (;;)
do_something_with(tmp);
Use READ_ONCE() to prevent the compiler from doing this to you:
while (tmp = READ_ONCE(a))
do_something_with(tmp);
(*) The compiler is within its rights to reload a variable, for example,
in cases where high register pressure prevents the compiler from
keeping all data of interest in registers. The compiler might
therefore optimize the variable 'tmp' out of our previous example:
while (tmp = a)
do_something_with(tmp);
This could result in the following code, which is perfectly safe in
single-threaded code, but can be fatal in concurrent code:
while (a)
do_something_with(a);
For example, the optimized version of this code could result in
passing a zero to do_something_with() in the case where the variable
a was modified by some other CPU between the "while" statement and
the call to do_something_with().
Again, use READ_ONCE() to prevent the compiler from doing this:
while (tmp = READ_ONCE(a))
do_something_with(tmp);
Note that if the compiler runs short of registers, it might save
tmp onto the stack. The overhead of this saving and later restoring
is why compilers reload variables. Doing so is perfectly safe for
single-threaded code, so you need to tell the compiler about cases
where it is not safe.
(*) The compiler is within its rights to omit a load entirely if it knows
what the value will be. For example, if the compiler can prove that
the value of variable 'a' is always zero, it can optimize this code:
while (tmp = a)
do_something_with(tmp);
Into this:
do { } while (0);
This transformation is a win for single-threaded code because it
gets rid of a load and a branch. The problem is that the compiler
will carry out its proof assuming that the current CPU is the only
one updating variable 'a'. If variable 'a' is shared, then the
compiler's proof will be erroneous. Use READ_ONCE() to tell the
compiler that it doesn't know as much as it thinks it does:
while (tmp = READ_ONCE(a))
do_something_with(tmp);
But please note that the compiler is also closely watching what you
do with the value after the READ_ONCE(). For example, suppose you
do the following and MAX is a preprocessor macro with the value 1:
while ((tmp = READ_ONCE(a)) % MAX)
do_something_with(tmp);
Then the compiler knows that the result of the "%" operator applied
to MAX will always be zero, again allowing the compiler to optimize
the code into near-nonexistence. (It will still load from the
variable 'a'.)
(*) Similarly, the compiler is within its rights to omit a store entirely
if it knows that the variable already has the value being stored.
Again, the compiler assumes that the current CPU is the only one
storing into the variable, which can cause the compiler to do the
wrong thing for shared variables. For example, suppose you have
the following:
a = 0;
... Code that does not store to variable a ...
a = 0;
The compiler sees that the value of variable 'a' is already zero, so
it might well omit the second store. This would come as a fatal
surprise if some other CPU might have stored to variable 'a' in the
meantime.
Use WRITE_ONCE() to prevent the compiler from making this sort of
wrong guess:
WRITE_ONCE(a, 0);
... Code that does not store to variable a ...
WRITE_ONCE(a, 0);
(*) The compiler is within its rights to reorder memory accesses unless
you tell it not to. For example, consider the following interaction
between process-level code and an interrupt handler:
void process_level(void)
{
msg = get_message();
flag = true;
}
void interrupt_handler(void)
{
if (flag)
process_message(msg);
}
There is nothing to prevent the compiler from transforming
process_level() to the following, in fact, this might well be a
win for single-threaded code:
void process_level(void)
{
flag = true;
msg = get_message();
}
If the interrupt occurs between these two statement, then
interrupt_handler() might be passed a garbled msg. Use WRITE_ONCE()
to prevent this as follows:
void process_level(void)
{
WRITE_ONCE(msg, get_message());
WRITE_ONCE(flag, true);
}
void interrupt_handler(void)
{
if (READ_ONCE(flag))
process_message(READ_ONCE(msg));
}
Note that the READ_ONCE() and WRITE_ONCE() wrappers in
interrupt_handler() are needed if this interrupt handler can itself
be interrupted by something that also accesses 'flag' and 'msg',
for example, a nested interrupt or an NMI. Otherwise, READ_ONCE()
and WRITE_ONCE() are not needed in interrupt_handler() other than
for documentation purposes. (Note also that nested interrupts
do not typically occur in modern Linux kernels, in fact, if an
interrupt handler returns with interrupts enabled, you will get a
WARN_ONCE() splat.)
You should assume that the compiler can move READ_ONCE() and
WRITE_ONCE() past code not containing READ_ONCE(), WRITE_ONCE(),
barrier(), or similar primitives.
This effect could also be achieved using barrier(), but READ_ONCE()
and WRITE_ONCE() are more selective: With READ_ONCE() and
WRITE_ONCE(), the compiler need only forget the contents of the
indicated memory locations, while with barrier() the compiler must
discard the value of all memory locations that it has currently
cached in any machine registers. Of course, the compiler must also
respect the order in which the READ_ONCE()s and WRITE_ONCE()s occur,
though the CPU of course need not do so.
(*) The compiler is within its rights to invent stores to a variable,
as in the following example:
if (a)
b = a;
else
b = 42;
The compiler might save a branch by optimizing this as follows:
b = 42;
if (a)
b = a;
In single-threaded code, this is not only safe, but also saves
a branch. Unfortunately, in concurrent code, this optimization
could cause some other CPU to see a spurious value of 42 -- even
if variable 'a' was never zero -- when loading variable 'b'.
Use WRITE_ONCE() to prevent this as follows:
if (a)
WRITE_ONCE(b, a);
else
WRITE_ONCE(b, 42);
The compiler can also invent loads. These are usually less
damaging, but they can result in cache-line bouncing and thus in
poor performance and scalability. Use READ_ONCE() to prevent
invented loads.
(*) For aligned memory locations whose size allows them to be accessed
with a single memory-reference instruction, prevents "load tearing"
and "store tearing," in which a single large access is replaced by
multiple smaller accesses. For example, given an architecture having
16-bit store instructions with 7-bit immediate fields, the compiler
might be tempted to use two 16-bit store-immediate instructions to
implement the following 32-bit store:
p = 0x00010002;
Please note that GCC really does use this sort of optimization,
which is not surprising given that it would likely take more
than two instructions to build the constant and then store it.
This optimization can therefore be a win in single-threaded code.
In fact, a recent bug (since fixed) caused GCC to incorrectly use
this optimization in a volatile store. In the absence of such bugs,
use of WRITE_ONCE() prevents store tearing in the following example:
WRITE_ONCE(p, 0x00010002);
Use of packed structures can also result in load and store tearing,
as in this example:
struct __attribute__((__packed__)) foo {
short a;
int b;
short c;
};
struct foo foo1, foo2;
...
foo2.a = foo1.a;
foo2.b = foo1.b;
foo2.c = foo1.c;
Because there are no READ_ONCE() or WRITE_ONCE() wrappers and no
volatile markings, the compiler would be well within its rights to
implement these three assignment statements as a pair of 32-bit
loads followed by a pair of 32-bit stores. This would result in
load tearing on 'foo1.b' and store tearing on 'foo2.b'. READ_ONCE()
and WRITE_ONCE() again prevent tearing in this example:
foo2.a = foo1.a;
WRITE_ONCE(foo2.b, READ_ONCE(foo1.b));
foo2.c = foo1.c;
All that aside, it is never necessary to use READ_ONCE() and
WRITE_ONCE() on a variable that has been marked volatile. For example,
because 'jiffies' is marked volatile, it is never necessary to
say READ_ONCE(jiffies). The reason for this is that READ_ONCE() and
WRITE_ONCE() are implemented as volatile casts, which has no effect when
its argument is already marked volatile.
Please note that these compiler barriers have no direct effect on the CPU,
which may then reorder things however it wishes.
CPU MEMORY BARRIERS
-------------------
The Linux kernel has seven basic CPU memory barriers:
TYPE MANDATORY SMP CONDITIONAL
======================= =============== ===============
GENERAL mb() smp_mb()
WRITE wmb() smp_wmb()
READ rmb() smp_rmb()
ADDRESS DEPENDENCY READ_ONCE()
All memory barriers except the address-dependency barriers imply a compiler
barrier. Address dependencies do not impose any additional compiler ordering.
Aside: In the case of address dependencies, the compiler would be expected
to issue the loads in the correct order (eg. `a[b]` would have to load
the value of b before loading a[b]), however there is no guarantee in
the C specification that the compiler may not speculate the value of b
(eg. is equal to 1) and load a[b] before b (eg. tmp = a[1]; if (b != 1)
tmp = a[b]; ). There is also the problem of a compiler reloading b after
having loaded a[b], thus having a newer copy of b than a[b]. A consensus
has not yet been reached about these problems, however the READ_ONCE()
macro is a good place to start looking.
SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
systems because it is assumed that a CPU will appear to be self-consistent,
and will order overlapping accesses correctly with respect to itself.
However, see the subsection on "Virtual Machine Guests" below.
[!] Note that SMP memory barriers _must_ be used to control the ordering of
references to shared memory on SMP systems, though the use of locking instead
is sufficient.
Mandatory barriers should not be used to control SMP effects, since mandatory
barriers impose unnecessary overhead on both SMP and UP systems. They may,
however, be used to control MMIO effects on accesses through relaxed memory I/O
windows. These barriers are required even on non-SMP systems as they affect
the order in which memory operations appear to a device by prohibiting both the
compiler and the CPU from reordering them.
There are some more advanced barrier functions:
(*) smp_store_mb(var, value)
This assigns the value to the variable and then inserts a full memory
barrier after it. It isn't guaranteed to insert anything more than a
compiler barrier in a UP compilation.
(*) smp_mb__before_atomic();
(*) smp_mb__after_atomic();
These are for use with atomic RMW functions that do not imply memory
barriers, but where the code needs a memory barrier. Examples for atomic
RMW functions that do not imply a memory barrier are e.g. add,
subtract, (failed) conditional operations, _relaxed functions,
but not atomic_read or atomic_set. A common example where a memory
barrier may be required is when atomic ops are used for reference
counting.
These are also used for atomic RMW bitop functions that do not imply a
memory barrier (such as set_bit and clear_bit).
As an example, consider a piece of code that marks an object as being dead
and then decrements the object's reference count:
obj->dead = 1;
smp_mb__before_atomic();
atomic_dec(&obj->ref_count);
This makes sure that the death mark on the object is perceived to be set
*before* the reference counter is decremented.
See Documentation/atomic_{t,bitops}.txt for more information.
(*) dma_wmb();
(*) dma_rmb();
(*) dma_mb();
These are for use with consistent memory to guarantee the ordering
of writes or reads of shared memory accessible to both the CPU and a
DMA capable device. See Documentation/core-api/dma-api.rst file for more
information about consistent memory.
For example, consider a device driver that shares memory with a device
and uses a descriptor status value to indicate if the descriptor belongs
to the device or the CPU, and a doorbell to notify it when new
descriptors are available:
if (desc->status != DEVICE_OWN) {
/* do not read data until we own descriptor */
dma_rmb();
/* read/modify data */
read_data = desc->data;
desc->data = write_data;
/* flush modifications before status update */
dma_wmb();
/* assign ownership */
desc->status = DEVICE_OWN;
/* Make descriptor status visible to the device followed by
* notify device of new descriptor
*/
writel(DESC_NOTIFY, doorbell);
}
The dma_rmb() allows us to guarantee that the device has released ownership
before we read the data from the descriptor, and the dma_wmb() allows
us to guarantee the data is written to the descriptor before the device
can see it now has ownership. The dma_mb() implies both a dma_rmb() and
a dma_wmb().
Note that the dma_*() barriers do not provide any ordering guarantees for
accesses to MMIO regions. See the later "KERNEL I/O BARRIER EFFECTS"
subsection for more information about I/O accessors and MMIO ordering.
(*) pmem_wmb();
This is for use with persistent memory to ensure that stores for which
modifications are written to persistent storage reached a platform
durability domain.
For example, after a non-temporal write to pmem region, we use pmem_wmb()
to ensure that stores have reached a platform durability domain. This ensures
that stores have updated persistent storage before any data access or
data transfer caused by subsequent instructions is initiated. This is
in addition to the ordering done by wmb().
For load from persistent memory, existing read memory barriers are sufficient
to ensure read ordering.
(*) io_stop_wc();
For memory accesses with write-combining attributes (e.g. those returned
by ioremap_wc()), the CPU may wait for prior accesses to be merged with
subsequent ones. io_stop_wc() can be used to prevent the merging of
write-combining memory accesses before this macro with those after it when
such wait has performance implications.
===============================
IMPLICIT KERNEL MEMORY BARRIERS
===============================
Some of the other functions in the linux kernel imply memory barriers, amongst
which are locking and scheduling functions.
This specification is a _minimum_ guarantee; any particular architecture may
provide more substantial guarantees, but these may not be relied upon outside
of arch specific code.
LOCK ACQUISITION FUNCTIONS
--------------------------
The Linux kernel has a number of locking constructs:
(*) spin locks
(*) R/W spin locks
(*) mutexes
(*) semaphores
(*) R/W semaphores
In all cases there are variants on "ACQUIRE" operations and "RELEASE" operations
for each construct. These operations all imply certain barriers:
(1) ACQUIRE operation implication:
Memory operations issued after the ACQUIRE will be completed after the
ACQUIRE operation has completed.
Memory operations issued before the ACQUIRE may be completed after
the ACQUIRE operation has completed.
(2) RELEASE operation implication:
Memory operations issued before the RELEASE will be completed before the
RELEASE operation has completed.
Memory operations issued after the RELEASE may be completed before the
RELEASE operation has completed.
(3) ACQUIRE vs ACQUIRE implication:
All ACQUIRE operations issued before another ACQUIRE operation will be
completed before that ACQUIRE operation.
(4) ACQUIRE vs RELEASE implication:
All ACQUIRE operations issued before a RELEASE operation will be
completed before the RELEASE operation.
(5) Failed conditional ACQUIRE implication:
Certain locking variants of the ACQUIRE operation may fail, either due to
being unable to get the lock immediately, or due to receiving an unblocked
signal while asleep waiting for the lock to become available. Failed
locks do not imply any sort of barrier.
[!] Note: one of the consequences of lock ACQUIREs and RELEASEs being only
one-way barriers is that the effects of instructions outside of a critical
section may seep into the inside of the critical section.
An ACQUIRE followed by a RELEASE may not be assumed to be full memory barrier
because it is possible for an access preceding the ACQUIRE to happen after the
ACQUIRE, and an access following the RELEASE to happen before the RELEASE, and
the two accesses can themselves then cross:
*A = a;
ACQUIRE M
RELEASE M
*B = b;
may occur as:
ACQUIRE M, STORE *B, STORE *A, RELEASE M
When the ACQUIRE and RELEASE are a lock acquisition and release,
respectively, this same reordering can occur if the lock's ACQUIRE and
RELEASE are to the same lock variable, but only from the perspective of
another CPU not holding that lock. In short, a ACQUIRE followed by an
RELEASE may -not- be assumed to be a full memory barrier.
Similarly, the reverse case of a RELEASE followed by an ACQUIRE does
not imply a full memory barrier. Therefore, the CPU's execution of the
critical sections corresponding to the RELEASE and the ACQUIRE can cross,
so that:
*A = a;
RELEASE M
ACQUIRE N
*B = b;
could occur as:
ACQUIRE N, STORE *B, STORE *A, RELEASE M
It might appear that this reordering could introduce a deadlock.
However, this cannot happen because if such a deadlock threatened,
the RELEASE would simply complete, thereby avoiding the deadlock.
Why does this work?
One key point is that we are only talking about the CPU doing
the reordering, not the compiler. If the compiler (or, for
that matter, the developer) switched the operations, deadlock
-could- occur.
But suppose the CPU reordered the operations. In this case,
the unlock precedes the lock in the assembly code. The CPU
simply elected to try executing the later lock operation first.
If there is a deadlock, this lock operation will simply spin (or
try to sleep, but more on that later). The CPU will eventually
execute the unlock operation (which preceded the lock operation
in the assembly code), which will unravel the potential deadlock,
allowing the lock operation to succeed.
But what if the lock is a sleeplock? In that case, the code will
try to enter the scheduler, where it will eventually encounter
a memory barrier, which will force the earlier unlock operation
to complete, again unraveling the deadlock. There might be
a sleep-unlock race, but the locking primitive needs to resolve
such races properly in any case.
Locks and semaphores may not provide any guarantee of ordering on UP compiled
systems, and so cannot be counted on in such a situation to actually achieve
anything at all - especially with respect to I/O accesses - unless combined
with interrupt disabling operations.
See also the section on "Inter-CPU acquiring barrier effects".
As an example, consider the following:
*A = a;
*B = b;
ACQUIRE
*C = c;
*D = d;
RELEASE
*E = e;
*F = f;
The following sequence of events is acceptable:
ACQUIRE, {*F,*A}, *E, {*C,*D}, *B, RELEASE
[+] Note that {*F,*A} indicates a combined access.
But none of the following are:
{*F,*A}, *B, ACQUIRE, *C, *D, RELEASE, *E
*A, *B, *C, ACQUIRE, *D, RELEASE, *E, *F
*A, *B, ACQUIRE, *C, RELEASE, *D, *E, *F
*B, ACQUIRE, *C, *D, RELEASE, {*F,*A}, *E
INTERRUPT DISABLING FUNCTIONS
-----------------------------
Functions that disable interrupts (ACQUIRE equivalent) and enable interrupts
(RELEASE equivalent) will act as compiler barriers only. So if memory or I/O
barriers are required in such a situation, they must be provided from some
other means.
SLEEP AND WAKE-UP FUNCTIONS
---------------------------
Sleeping and waking on an event flagged in global data can be viewed as an
interaction between two pieces of data: the task state of the task waiting for
the event and the global data used to indicate the event. To make sure that
these appear to happen in the right order, the primitives to begin the process
of going to sleep, and the primitives to initiate a wake up imply certain
barriers.
Firstly, the sleeper normally follows something like this sequence of events:
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (event_indicated)
break;
schedule();
}
A general memory barrier is interpolated automatically by set_current_state()
after it has altered the task state:
CPU 1
===============================
set_current_state();
smp_store_mb();
STORE current->state
<general barrier>
LOAD event_indicated
set_current_state() may be wrapped by:
prepare_to_wait();
prepare_to_wait_exclusive();
which therefore also imply a general memory barrier after setting the state.
The whole sequence above is available in various canned forms, all of which
interpolate the memory barrier in the right place:
wait_event();
wait_event_interruptible();
wait_event_interruptible_exclusive();
wait_event_interruptible_timeout();
wait_event_killable();
wait_event_timeout();
wait_on_bit();
wait_on_bit_lock();
Secondly, code that performs a wake up normally follows something like this:
event_indicated = 1;
wake_up(&event_wait_queue);
or:
event_indicated = 1;
wake_up_process(event_daemon);
A general memory barrier is executed by wake_up() if it wakes something up.
If it doesn't wake anything up then a memory barrier may or may not be
executed; you must not rely on it. The barrier occurs before the task state
is accessed, in particular, it sits between the STORE to indicate the event
and the STORE to set TASK_RUNNING:
CPU 1 (Sleeper) CPU 2 (Waker)
=============================== ===============================
set_current_state(); STORE event_indicated
smp_store_mb(); wake_up();
STORE current->state ...
<general barrier> <general barrier>
LOAD event_indicated if ((LOAD task->state) & TASK_NORMAL)
STORE task->state
where "task" is the thread being woken up and it equals CPU 1's "current".
To repeat, a general memory barrier is guaranteed to be executed by wake_up()
if something is actually awakened, but otherwise there is no such guarantee.
To see this, consider the following sequence of events, where X and Y are both
initially zero:
CPU 1 CPU 2
=============================== ===============================
X = 1; Y = 1;
smp_mb(); wake_up();
LOAD Y LOAD X
If a wakeup does occur, one (at least) of the two loads must see 1. If, on
the other hand, a wakeup does not occur, both loads might see 0.
wake_up_process() always executes a general memory barrier. The barrier again
occurs before the task state is accessed. In particular, if the wake_up() in
the previous snippet were replaced by a call to wake_up_process() then one of
the two loads would be guaranteed to see 1.
The available waker functions include:
complete();
wake_up();
wake_up_all();
wake_up_bit();
wake_up_interruptible();
wake_up_interruptible_all();
wake_up_interruptible_nr();
wake_up_interruptible_poll();
wake_up_interruptible_sync();
wake_up_interruptible_sync_poll();
wake_up_locked();
wake_up_locked_poll();
wake_up_nr();
wake_up_poll();
wake_up_process();
In terms of memory ordering, these functions all provide the same guarantees of
a wake_up() (or stronger).
[!] Note that the memory barriers implied by the sleeper and the waker do _not_
order multiple stores before the wake-up with respect to loads of those stored
values after the sleeper has called set_current_state(). For instance, if the
sleeper does:
set_current_state(TASK_INTERRUPTIBLE);
if (event_indicated)
break;
__set_current_state(TASK_RUNNING);
do_something(my_data);
and the waker does:
my_data = value;
event_indicated = 1;
wake_up(&event_wait_queue);
there's no guarantee that the change to event_indicated will be perceived by
the sleeper as coming after the change to my_data. In such a circumstance, the
code on both sides must interpolate its own memory barriers between the
separate data accesses. Thus the above sleeper ought to do:
set_current_state(TASK_INTERRUPTIBLE);
if (event_indicated) {
smp_rmb();
do_something(my_data);
}
and the waker should do:
my_data = value;
smp_wmb();
event_indicated = 1;
wake_up(&event_wait_queue);
MISCELLANEOUS FUNCTIONS
-----------------------
Other functions that imply barriers:
(*) schedule() and similar imply full memory barriers.
===================================
INTER-CPU ACQUIRING BARRIER EFFECTS
===================================
On SMP systems locking primitives give a more substantial form of barrier: one
that does affect memory access ordering on other CPUs, within the context of
conflict on any particular lock.
ACQUIRES VS MEMORY ACCESSES
---------------------------
Consider the following: the system has a pair of spinlocks (M) and (Q), and
three CPUs; then should the following sequence of events occur:
CPU 1 CPU 2
=============================== ===============================
WRITE_ONCE(*A, a); WRITE_ONCE(*E, e);
ACQUIRE M ACQUIRE Q
WRITE_ONCE(*B, b); WRITE_ONCE(*F, f);
WRITE_ONCE(*C, c); WRITE_ONCE(*G, g);
RELEASE M RELEASE Q
WRITE_ONCE(*D, d); WRITE_ONCE(*H, h);
Then there is no guarantee as to what order CPU 3 will see the accesses to *A
through *H occur in, other than the constraints imposed by the separate locks
on the separate CPUs. It might, for example, see:
*E, ACQUIRE M, ACQUIRE Q, *G, *C, *F, *A, *B, RELEASE Q, *D, *H, RELEASE M
But it won't see any of:
*B, *C or *D preceding ACQUIRE M
*A, *B or *C following RELEASE M
*F, *G or *H preceding ACQUIRE Q
*E, *F or *G following RELEASE Q
=================================
WHERE ARE MEMORY BARRIERS NEEDED?
=================================
Under normal operation, memory operation reordering is generally not going to
be a problem as a single-threaded linear piece of code will still appear to
work correctly, even if it's in an SMP kernel. There are, however, four
circumstances in which reordering definitely _could_ be a problem:
(*) Interprocessor interaction.
(*) Atomic operations.
(*) Accessing devices.
(*) Interrupts.
INTERPROCESSOR INTERACTION
--------------------------
When there's a system with more than one processor, more than one CPU in the
system may be working on the same data set at the same time. This can cause
synchronisation problems, and the usual way of dealing with them is to use
locks. Locks, however, are quite expensive, and so it may be preferable to
operate without the use of a lock if at all possible. In such a case
operations that affect both CPUs may have to be carefully ordered to prevent
a malfunction.
Consider, for example, the R/W semaphore slow path. Here a waiting process is
queued on the semaphore, by virtue of it having a piece of its stack linked to
the semaphore's list of waiting processes:
struct rw_semaphore {
...
spinlock_t lock;
struct list_head waiters;
};
struct rwsem_waiter {
struct list_head list;
struct task_struct *task;
};
To wake up a particular waiter, the up_read() or up_write() functions have to:
(1) read the next pointer from this waiter's record to know as to where the
next waiter record is;
(2) read the pointer to the waiter's task structure;
(3) clear the task pointer to tell the waiter it has been given the semaphore;
(4) call wake_up_process() on the task; and
(5) release the reference held on the waiter's task struct.
In other words, it has to perform this sequence of events:
LOAD waiter->list.next;
LOAD waiter->task;
STORE waiter->task;
CALL wakeup
RELEASE task
and if any of these steps occur out of order, then the whole thing may
malfunction.
Once it has queued itself and dropped the semaphore lock, the waiter does not
get the lock again; it instead just waits for its task pointer to be cleared
before proceeding. Since the record is on the waiter's stack, this means that
if the task pointer is cleared _before_ the next pointer in the list is read,
another CPU might start processing the waiter and might clobber the waiter's
stack before the up*() function has a chance to read the next pointer.
Consider then what might happen to the above sequence of events:
CPU 1 CPU 2
=============================== ===============================
down_xxx()
Queue waiter
Sleep
up_yyy()
LOAD waiter->task;
STORE waiter->task;
Woken up by other event
<preempt>
Resume processing
down_xxx() returns
call foo()
foo() clobbers *waiter
</preempt>
LOAD waiter->list.next;
--- OOPS ---
This could be dealt with using the semaphore lock, but then the down_xxx()
function has to needlessly get the spinlock again after being woken up.
The way to deal with this is to insert a general SMP memory barrier:
LOAD waiter->list.next;
LOAD waiter->task;
smp_mb();
STORE waiter->task;
CALL wakeup
RELEASE task
In this case, the barrier makes a guarantee that all memory accesses before the
barrier will appear to happen before all the memory accesses after the barrier
with respect to the other CPUs on the system. It does _not_ guarantee that all
the memory accesses before the barrier will be complete by the time the barrier
instruction itself is complete.
On a UP system - where this wouldn't be a problem - the smp_mb() is just a
compiler barrier, thus making sure the compiler emits the instructions in the
right order without actually intervening in the CPU. Since there's only one
CPU, that CPU's dependency ordering logic will take care of everything else.
ATOMIC OPERATIONS
-----------------
While they are technically interprocessor interaction considerations, atomic
operations are noted specially as some of them imply full memory barriers and
some don't, but they're very heavily relied on as a group throughout the
kernel.
See Documentation/atomic_t.txt for more information.
ACCESSING DEVICES
-----------------
Many devices can be memory mapped, and so appear to the CPU as if they're just
a set of memory locations. To control such a device, the driver usually has to
make the right memory accesses in exactly the right order.
However, having a clever CPU or a clever compiler creates a potential problem
in that the carefully sequenced accesses in the driver code won't reach the
device in the requisite order if the CPU or the compiler thinks it is more
efficient to reorder, combine or merge accesses - something that would cause
the device to malfunction.
Inside of the Linux kernel, I/O should be done through the appropriate accessor
routines - such as inb() or writel() - which know how to make such accesses
appropriately sequential. While this, for the most part, renders the explicit
use of memory barriers unnecessary, if the accessor functions are used to refer
to an I/O memory window with relaxed memory access properties, then _mandatory_
memory barriers are required to enforce ordering.
See Documentation/driver-api/device-io.rst for more information.
INTERRUPTS
----------
A driver may be interrupted by its own interrupt service routine, and thus the
two parts of the driver may interfere with each other's attempts to control or
access the device.
This may be alleviated - at least in part - by disabling local interrupts (a
form of locking), such that the critical operations are all contained within
the interrupt-disabled section in the driver. While the driver's interrupt
routine is executing, the driver's core may not run on the same CPU, and its
interrupt is not permitted to happen again until the current interrupt has been
handled, thus the interrupt handler does not need to lock against that.
However, consider a driver that was talking to an ethernet card that sports an
address register and a data register. If that driver's core talks to the card
under interrupt-disablement and then the driver's interrupt handler is invoked:
LOCAL IRQ DISABLE
writew(ADDR, 3);
writew(DATA, y);
LOCAL IRQ ENABLE
<interrupt>
writew(ADDR, 4);
q = readw(DATA);
</interrupt>
The store to the data register might happen after the second store to the
address register if ordering rules are sufficiently relaxed:
STORE *ADDR = 3, STORE *ADDR = 4, STORE *DATA = y, q = LOAD *DATA
If ordering rules are relaxed, it must be assumed that accesses done inside an
interrupt disabled section may leak outside of it and may interleave with
accesses performed in an interrupt - and vice versa - unless implicit or
explicit barriers are used.
Normally this won't be a problem because the I/O accesses done inside such
sections will include synchronous load operations on strictly ordered I/O
registers that form implicit I/O barriers.
A similar situation may occur between an interrupt routine and two routines
running on separate CPUs that communicate with each other. If such a case is
likely, then interrupt-disabling locks should be used to guarantee ordering.
==========================
KERNEL I/O BARRIER EFFECTS
==========================
Interfacing with peripherals via I/O accesses is deeply architecture and device
specific. Therefore, drivers which are inherently non-portable may rely on
specific behaviours of their target systems in order to achieve synchronization
in the most lightweight manner possible. For drivers intending to be portable
between multiple architectures and bus implementations, the kernel offers a
series of accessor functions that provide various degrees of ordering
guarantees:
(*) readX(), writeX():
The readX() and writeX() MMIO accessors take a pointer to the
peripheral being accessed as an __iomem * parameter. For pointers
mapped with the default I/O attributes (e.g. those returned by
ioremap()), the ordering guarantees are as follows:
1. All readX() and writeX() accesses to the same peripheral are ordered
with respect to each other. This ensures that MMIO register accesses
by the same CPU thread to a particular device will arrive in program
order.
2. A writeX() issued by a CPU thread holding a spinlock is ordered
before a writeX() to the same peripheral from another CPU thread
issued after a later acquisition of the same spinlock. This ensures
that MMIO register writes to a particular device issued while holding
a spinlock will arrive in an order consistent with acquisitions of
the lock.
3. A writeX() by a CPU thread to the peripheral will first wait for the
completion of all prior writes to memory either issued by, or
propagated to, the same thread. This ensures that writes by the CPU
to an outbound DMA buffer allocated by dma_alloc_coherent() will be
visible to a DMA engine when the CPU writes to its MMIO control
register to trigger the transfer.
4. A readX() by a CPU thread from the peripheral will complete before
any subsequent reads from memory by the same thread can begin. This
ensures that reads by the CPU from an incoming DMA buffer allocated
by dma_alloc_coherent() will not see stale data after reading from
the DMA engine's MMIO status register to establish that the DMA
transfer has completed.
5. A readX() by a CPU thread from the peripheral will complete before
any subsequent delay() loop can begin execution on the same thread.
This ensures that two MMIO register writes by the CPU to a peripheral
will arrive at least 1us apart if the first write is immediately read
back with readX() and udelay(1) is called prior to the second
writeX():
writel(42, DEVICE_REGISTER_0); // Arrives at the device...
readl(DEVICE_REGISTER_0);
udelay(1);
writel(42, DEVICE_REGISTER_1); // ...at least 1us before this.
The ordering properties of __iomem pointers obtained with non-default
attributes (e.g. those returned by ioremap_wc()) are specific to the
underlying architecture and therefore the guarantees listed above cannot
generally be relied upon for accesses to these types of mappings.
(*) readX_relaxed(), writeX_relaxed():
These are similar to readX() and writeX(), but provide weaker memory
ordering guarantees. Specifically, they do not guarantee ordering with
respect to locking, normal memory accesses or delay() loops (i.e.
bullets 2-5 above) but they are still guaranteed to be ordered with
respect to other accesses from the same CPU thread to the same
peripheral when operating on __iomem pointers mapped with the default
I/O attributes.
(*) readsX(), writesX():
The readsX() and writesX() MMIO accessors are designed for accessing
register-based, memory-mapped FIFOs residing on peripherals that are not
capable of performing DMA. Consequently, they provide only the ordering
guarantees of readX_relaxed() and writeX_relaxed(), as documented above.
(*) inX(), outX():
The inX() and outX() accessors are intended to access legacy port-mapped
I/O peripherals, which may require special instructions on some
architectures (notably x86). The port number of the peripheral being
accessed is passed as an argument.
Since many CPU architectures ultimately access these peripherals via an
internal virtual memory mapping, the portable ordering guarantees
provided by inX() and outX() are the same as those provided by readX()
and writeX() respectively when accessing a mapping with the default I/O
attributes.
Device drivers may expect outX() to emit a non-posted write transaction
that waits for a completion response from the I/O peripheral before
returning. This is not guaranteed by all architectures and is therefore
not part of the portable ordering semantics.
(*) insX(), outsX():
As above, the insX() and outsX() accessors provide the same ordering
guarantees as readsX() and writesX() respectively when accessing a
mapping with the default I/O attributes.
(*) ioreadX(), iowriteX():
These will perform appropriately for the type of access they're actually
doing, be it inX()/outX() or readX()/writeX().
With the exception of the string accessors (insX(), outsX(), readsX() and
writesX()), all of the above assume that the underlying peripheral is
little-endian and will therefore perform byte-swapping operations on big-endian
architectures.
========================================
ASSUMED MINIMUM EXECUTION ORDERING MODEL
========================================
It has to be assumed that the conceptual CPU is weakly-ordered but that it will
maintain the appearance of program causality with respect to itself. Some CPUs
(such as i386 or x86_64) are more constrained than others (such as powerpc or
frv), and so the most relaxed case (namely DEC Alpha) must be assumed outside
of arch-specific code.
This means that it must be considered that the CPU will execute its instruction
stream in any order it feels like - or even in parallel - provided that if an
instruction in the stream depends on an earlier instruction, then that
earlier instruction must be sufficiently complete[*] before the later
instruction may proceed; in other words: provided that the appearance of
causality is maintained.
[*] Some instructions have more than one effect - such as changing the
condition codes, changing registers or changing memory - and different
instructions may depend on different effects.
A CPU may also discard any instruction sequence that winds up having no
ultimate effect. For example, if two adjacent instructions both load an
immediate value into the same register, the first may be discarded.
Similarly, it has to be assumed that compiler might reorder the instruction
stream in any way it sees fit, again provided the appearance of causality is
maintained.
============================
THE EFFECTS OF THE CPU CACHE
============================
The way cached memory operations are perceived across the system is affected to
a certain extent by the caches that lie between CPUs and memory, and by the
memory coherence system that maintains the consistency of state in the system.
As far as the way a CPU interacts with another part of the system through the
caches goes, the memory system has to include the CPU's caches, and memory
barriers for the most part act at the interface between the CPU and its cache
(memory barriers logically act on the dotted line in the following diagram):
<--- CPU ---> : <----------- Memory ----------->
:
+--------+ +--------+ : +--------+ +-----------+
| | | | : | | | | +--------+
| CPU | | Memory | : | CPU | | | | |
| Core |--->| Access |----->| Cache |<-->| | | |
| | | Queue | : | | | |--->| Memory |
| | | | : | | | | | |
+--------+ +--------+ : +--------+ | | | |
: | Cache | +--------+
: | Coherency |
: | Mechanism | +--------+
+--------+ +--------+ : +--------+ | | | |
| | | | : | | | | | |
| CPU | | Memory | : | CPU | | |--->| Device |
| Core |--->| Access |----->| Cache |<-->| | | |
| | | Queue | : | | | | | |
| | | | : | | | | +--------+
+--------+ +--------+ : +--------+ +-----------+
:
:
Although any particular load or store may not actually appear outside of the
CPU that issued it since it may have been satisfied within the CPU's own cache,
it will still appear as if the full memory access had taken place as far as the
other CPUs are concerned since the cache coherency mechanisms will migrate the
cacheline over to the accessing CPU and propagate the effects upon conflict.
The CPU core may execute instructions in any order it deems fit, provided the
expected program causality appears to be maintained. Some of the instructions
generate load and store operations which then go into the queue of memory
accesses to be performed. The core may place these in the queue in any order
it wishes, and continue execution until it is forced to wait for an instruction
to complete.
What memory barriers are concerned with is controlling the order in which
accesses cross from the CPU side of things to the memory side of things, and
the order in which the effects are perceived to happen by the other observers
in the system.
[!] Memory barriers are _not_ needed within a given CPU, as CPUs always see
their own loads and stores as if they had happened in program order.
[!] MMIO or other device accesses may bypass the cache system. This depends on
the properties of the memory window through which devices are accessed and/or
the use of any special device communication instructions the CPU may have.
CACHE COHERENCY VS DMA
----------------------
Not all systems maintain cache coherency with respect to devices doing DMA. In
such cases, a device attempting DMA may obtain stale data from RAM because
dirty cache lines may be resident in the caches of various CPUs, and may not
have been written back to RAM yet. To deal with this, the appropriate part of
the kernel must flush the overlapping bits of cache on each CPU (and maybe
invalidate them as well).
In addition, the data DMA'd to RAM by a device may be overwritten by dirty
cache lines being written back to RAM from a CPU's cache after the device has
installed its own data, or cache lines present in the CPU's cache may simply
obscure the fact that RAM has been updated, until at such time as the cacheline
is discarded from the CPU's cache and reloaded. To deal with this, the
appropriate part of the kernel must invalidate the overlapping bits of the
cache on each CPU.
See Documentation/core-api/cachetlb.rst for more information on cache
management.
CACHE COHERENCY VS MMIO
-----------------------
Memory mapped I/O usually takes place through memory locations that are part of
a window in the CPU's memory space that has different properties assigned than
the usual RAM directed window.
Amongst these properties is usually the fact that such accesses bypass the
caching entirely and go directly to the device buses. This means MMIO accesses
may, in effect, overtake accesses to cached memory that were emitted earlier.
A memory barrier isn't sufficient in such a case, but rather the cache must be
flushed between the cached memory write and the MMIO access if the two are in
any way dependent.
=========================
THE THINGS CPUS GET UP TO
=========================
A programmer might take it for granted that the CPU will perform memory
operations in exactly the order specified, so that if the CPU is, for example,
given the following piece of code to execute:
a = READ_ONCE(*A);
WRITE_ONCE(*B, b);
c = READ_ONCE(*C);
d = READ_ONCE(*D);
WRITE_ONCE(*E, e);
they would then expect that the CPU will complete the memory operation for each
instruction before moving on to the next one, leading to a definite sequence of
operations as seen by external observers in the system:
LOAD *A, STORE *B, LOAD *C, LOAD *D, STORE *E.
Reality is, of course, much messier. With many CPUs and compilers, the above
assumption doesn't hold because:
(*) loads are more likely to need to be completed immediately to permit
execution progress, whereas stores can often be deferred without a
problem;
(*) loads may be done speculatively, and the result discarded should it prove
to have been unnecessary;
(*) loads may be done speculatively, leading to the result having been fetched
at the wrong time in the expected sequence of events;
(*) the order of the memory accesses may be rearranged to promote better use
of the CPU buses and caches;
(*) loads and stores may be combined to improve performance when talking to
memory or I/O hardware that can do batched accesses of adjacent locations,
thus cutting down on transaction setup costs (memory and PCI devices may
both be able to do this); and
(*) the CPU's data cache may affect the ordering, and while cache-coherency
mechanisms may alleviate this - once the store has actually hit the cache
- there's no guarantee that the coherency management will be propagated in
order to other CPUs.
So what another CPU, say, might actually observe from the above piece of code
is:
LOAD *A, ..., LOAD {*C,*D}, STORE *E, STORE *B
(Where "LOAD {*C,*D}" is a combined load)
However, it is guaranteed that a CPU will be self-consistent: it will see its
_own_ accesses appear to be correctly ordered, without the need for a memory
barrier. For instance with the following code:
U = READ_ONCE(*A);
WRITE_ONCE(*A, V);
WRITE_ONCE(*A, W);
X = READ_ONCE(*A);
WRITE_ONCE(*A, Y);
Z = READ_ONCE(*A);
and assuming no intervention by an external influence, it can be assumed that
the final result will appear to be:
U == the original value of *A
X == W
Z == Y
*A == Y
The code above may cause the CPU to generate the full sequence of memory
accesses:
U=LOAD *A, STORE *A=V, STORE *A=W, X=LOAD *A, STORE *A=Y, Z=LOAD *A
in that order, but, without intervention, the sequence may have almost any
combination of elements combined or discarded, provided the program's view
of the world remains consistent. Note that READ_ONCE() and WRITE_ONCE()
are -not- optional in the above example, as there are architectures
where a given CPU might reorder successive loads to the same location.
On such architectures, READ_ONCE() and WRITE_ONCE() do whatever is
necessary to prevent this, for example, on Itanium the volatile casts
used by READ_ONCE() and WRITE_ONCE() cause GCC to emit the special ld.acq
and st.rel instructions (respectively) that prevent such reordering.
The compiler may also combine, discard or defer elements of the sequence before
the CPU even sees them.
For instance:
*A = V;
*A = W;
may be reduced to:
*A = W;
since, without either a write barrier or an WRITE_ONCE(), it can be
assumed that the effect of the storage of V to *A is lost. Similarly:
*A = Y;
Z = *A;
may, without a memory barrier or an READ_ONCE() and WRITE_ONCE(), be
reduced to:
*A = Y;
Z = Y;
and the LOAD operation never appear outside of the CPU.
AND THEN THERE'S THE ALPHA
--------------------------
The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that,
some versions of the Alpha CPU have a split data cache, permitting them to have
two semantically-related cache lines updated at separate times. This is where
the address-dependency barrier really becomes necessary as this synchronises
both caches with the memory coherence system, thus making it seem like pointer
changes vs new data occur in the right order.
The Alpha defines the Linux kernel's memory model, although as of v4.15
the Linux kernel's addition of smp_mb() to READ_ONCE() on Alpha greatly
reduced its impact on the memory model.
VIRTUAL MACHINE GUESTS
----------------------
Guests running within virtual machines might be affected by SMP effects even if
the guest itself is compiled without SMP support. This is an artifact of
interfacing with an SMP host while running an UP kernel. Using mandatory
barriers for this use-case would be possible but is often suboptimal.
To handle this case optimally, low-level virt_mb() etc macros are available.
These have the same effect as smp_mb() etc when SMP is enabled, but generate
identical code for SMP and non-SMP systems. For example, virtual machine guests
should use virt_mb() rather than smp_mb() when synchronizing against a
(possibly SMP) host.
These are equivalent to smp_mb() etc counterparts in all other respects,
in particular, they do not control MMIO effects: to control
MMIO effects, use mandatory barriers.
============
EXAMPLE USES
============
CIRCULAR BUFFERS
----------------
Memory barriers can be used to implement circular buffering without the need
of a lock to serialise the producer with the consumer. See:
Documentation/core-api/circular-buffers.rst
for details.
==========
REFERENCES
==========
Alpha AXP Architecture Reference Manual, Second Edition (Sites & Witek,
Digital Press)
Chapter 5.2: Physical Address Space Characteristics
Chapter 5.4: Caches and Write Buffers
Chapter 5.5: Data Sharing
Chapter 5.6: Read/Write Ordering
AMD64 Architecture Programmer's Manual Volume 2: System Programming
Chapter 7.1: Memory-Access Ordering
Chapter 7.4: Buffering and Combining Memory Writes
ARM Architecture Reference Manual (ARMv8, for ARMv8-A architecture profile)
Chapter B2: The AArch64 Application Level Memory Model
IA-32 Intel Architecture Software Developer's Manual, Volume 3:
System Programming Guide
Chapter 7.1: Locked Atomic Operations
Chapter 7.2: Memory Ordering
Chapter 7.4: Serializing Instructions
The SPARC Architecture Manual, Version 9
Chapter 8: Memory Models
Appendix D: Formal Specification of the Memory Models
Appendix J: Programming with the Memory Models
Storage in the PowerPC (Stone and Fitzgerald)
UltraSPARC Programmer Reference Manual
Chapter 5: Memory Accesses and Cacheability
Chapter 15: Sparc-V9 Memory Models
UltraSPARC III Cu User's Manual
Chapter 9: Memory Models
UltraSPARC IIIi Processor User's Manual
Chapter 8: Memory Models
UltraSPARC Architecture 2005
Chapter 9: Memory
Appendix D: Formal Specifications of the Memory Models
UltraSPARC T1 Supplement to the UltraSPARC Architecture 2005
Chapter 8: Memory Models
Appendix F: Caches and Cache Coherency
Solaris Internals, Core Kernel Architecture, p63-68:
Chapter 3.3: Hardware Considerations for Locks and
Synchronization
Unix Systems for Modern Architectures, Symmetric Multiprocessing and Caching
for Kernel Programmers:
Chapter 13: Other Memory Models
Intel Itanium Architecture Software Developer's Manual: Volume 1:
Section 2.6: Speculation
Section 4.4: Memory Access
Reference in New Issue View Git Blame Copy Permalink