Yangtao Li a1158e36f8 pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler ...

It is found on many allwinner soc that there is a low probability that
the interrupt status cannot be read in sunxi_pinctrl_irq_handler. This
will cause the interrupt status of a gpio bank to always be active on
gic, preventing gic from responding to other spi interrupts correctly.

So we should call the chained_irq_* each time enter sunxi_pinctrl_irq_handler().

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/85263ce8b058e80cea25c6ad6383eb256ce96cc8.1604988979.git.frank@allwinnertech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2020-11-24 09:41:29 +01:00

..

Kconfig

pinctrl: sunxi: add support for the Allwinner A100 pin controller

2020-09-12 12:35:42 +02:00

Makefile

pinctrl: sunxi: add support for the Allwinner A100 pin controller

2020-09-12 12:35:42 +02:00

pinctrl-sun4i-a10.c

pinctrl: sunxi: fix a typo when merging A20 support to A10 driver

2017-12-28 15:06:01 +01:00

pinctrl-sun5i.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun6i-a31-r.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun6i-a31.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-a23-r.c

pinctrl: sunxi: handle probe defferal

2020-04-16 10:23:02 +02:00

pinctrl-sun8i-a23.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-a33.c

pinctrl: sunxi: change irq_bank_base to irq_bank_map

2018-03-27 15:07:49 +02:00

pinctrl-sun8i-a83t-r.c

pinctrl: sunxi: Add support for A83T R_PIO

2017-06-09 11:20:32 +02:00

pinctrl-sun8i-a83t.c

pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11

2018-12-07 13:32:19 +01:00

pinctrl-sun8i-h3-r.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-h3.c

pinctrl: sunxi: Disable strict mode for old pinctrl drivers

2017-10-31 09:45:00 +01:00

pinctrl-sun8i-v3s.c

pinctrl: sunxi: v3s: introduce support for V3

2019-08-05 12:35:29 +02:00

pinctrl-sun9i-a80-r.c

pinctrl: sunxi: Prepare for alternative bias voltage setting methods

2019-04-23 12:29:21 +02:00

pinctrl-sun9i-a80.c

pinctrl: sunxi: Prepare for alternative bias voltage setting methods

2019-04-23 12:29:21 +02:00

pinctrl-sun50i-a64-r.c

pinctrl: sunxi: Add A64 R_PIO controller support

2017-03-14 14:42:24 +01:00

pinctrl-sun50i-a64.c

pinctrl: sunxi: a64: Rename function ts0 to ts

2018-12-07 13:29:28 +01:00

pinctrl-sun50i-a100-r.c

pinctrl: sunxi: add support for the Allwinner A100 pin controller

2020-09-12 12:35:42 +02:00

pinctrl-sun50i-a100.c

pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller

2020-11-24 09:40:03 +01:00

pinctrl-sun50i-h5.c

pinctrl: sunxi: sun50i-h5 use platform_irq_count

2020-01-07 09:55:33 +01:00

pinctrl-sun50i-h6-r.c

pinctrl: sunxi: add support for H6 R_PIO pin controller

2018-05-16 14:19:13 +02:00

pinctrl-sun50i-h6.c

pinctrl: sunxi: Support I/O bias voltage setting on H6

2019-04-23 12:31:42 +02:00

pinctrl-suniv-f1c100s.c

pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)

2018-11-25 13:49:10 +01:00

pinctrl-sunxi.c

pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler

2020-11-24 09:41:29 +01:00

pinctrl-sunxi.h

pinctrl: sunxi: v3s: introduce support for V3

2019-08-05 12:35:29 +02:00