Bruce Allan 7d3cabbcc8 e1000e: disable K1 at 1000Mbps for 82577/82578 ...

This workaround is required for an issue in hardware where noise on the
interconnect between the MAC and PHY could be generated by a lower power
mode (K1) at 1000Mbps resulting in bad packets.  Disable K1 while at 1000
Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2009-07-03 20:09:42 -07:00

..

82571.c

e1000e: Fixes possible phy corrupton on 82571 designs.

2009-06-09 05:25:35 -07:00

defines.h

e1000e: delay after LCD reset and proper checks for PHY configuration done

2009-07-03 20:09:29 -07:00

e1000.h

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

2009-06-15 03:02:23 -07:00

es2lan.c

e1000e: add support for 82577/82578 GbE LOM parts

2009-06-03 02:46:34 -07:00

ethtool.c

e1000e: Expose MDI-X status via ethtool change

2009-06-09 05:25:36 -07:00

hw.h

e1000e: disable K1 at 1000Mbps for 82577/82578

2009-07-03 20:09:42 -07:00

ich8lan.c

e1000e: disable K1 at 1000Mbps for 82577/82578

2009-07-03 20:09:42 -07:00

lib.c

e1000e: disable K1 at 1000Mbps for 82577/82578

2009-07-03 20:09:42 -07:00

Makefile

e1000e: reformat comment blocks, cosmetic changes only

2008-03-28 22:14:56 -04:00

netdev.c

e1000e: io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT

2009-06-30 19:47:02 -07:00

param.c

e1000e: enable CRC stripping by default

2009-06-03 02:46:31 -07:00

phy.c

e1000e: delay second read of PHY_STATUS register on failure of first read

2009-07-03 20:09:39 -07:00