mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-08 14:13:53 +00:00
2382b5ae80
Expose 'pm_idle_enabled' sysfs attribute. This attribute controls how idle conditions are handled. If it is set to 1 (idle support enabled) when the device detects an idle condition, the driver will transition the device to the 'MIN' power configuration. In order to set the value of this attribute for a device, the device must be in the 'down' state. This only applies to qat_4xxx generation. Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
96 lines
3.1 KiB
Plaintext
96 lines
3.1 KiB
Plaintext
What: /sys/bus/pci/devices/<BDF>/qat/state
|
|
Date: June 2022
|
|
KernelVersion: 6.0
|
|
Contact: qat-linux@intel.com
|
|
Description: (RW) Reports the current state of the QAT device. Write to
|
|
the file to start or stop the device.
|
|
|
|
The values are:
|
|
|
|
* up: the device is up and running
|
|
* down: the device is down
|
|
|
|
|
|
It is possible to transition the device from up to down only
|
|
if the device is up and vice versa.
|
|
|
|
This attribute is only available for qat_4xxx devices.
|
|
|
|
What: /sys/bus/pci/devices/<BDF>/qat/cfg_services
|
|
Date: June 2022
|
|
KernelVersion: 6.0
|
|
Contact: qat-linux@intel.com
|
|
Description: (RW) Reports the current configuration of the QAT device.
|
|
Write to the file to change the configured services.
|
|
|
|
The values are:
|
|
|
|
* sym;asym: the device is configured for running crypto
|
|
services
|
|
* asym;sym: identical to sym;asym
|
|
* dc: the device is configured for running compression services
|
|
* sym: the device is configured for running symmetric crypto
|
|
services
|
|
* asym: the device is configured for running asymmetric crypto
|
|
services
|
|
* asym;dc: the device is configured for running asymmetric
|
|
crypto services and compression services
|
|
* dc;asym: identical to asym;dc
|
|
* sym;dc: the device is configured for running symmetric crypto
|
|
services and compression services
|
|
* dc;sym: identical to sym;dc
|
|
|
|
It is possible to set the configuration only if the device
|
|
is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
|
|
|
|
The following example shows how to change the configuration of
|
|
a device configured for running crypto services in order to
|
|
run data compression::
|
|
|
|
# cat /sys/bus/pci/devices/<BDF>/qat/state
|
|
up
|
|
# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
|
|
sym;asym
|
|
# echo down > /sys/bus/pci/devices/<BDF>/qat/state
|
|
# echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
|
|
# echo up > /sys/bus/pci/devices/<BDF>/qat/state
|
|
# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
|
|
dc
|
|
|
|
This attribute is only available for qat_4xxx devices.
|
|
|
|
What: /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
|
|
Date: June 2023
|
|
KernelVersion: 6.5
|
|
Contact: qat-linux@intel.com
|
|
Description: (RW) This configuration option provides a way to force the device into remaining in
|
|
the MAX power state.
|
|
If idle support is enabled the device will transition to the `MIN` power state when
|
|
idle, otherwise will stay in the MAX power state.
|
|
Write to the file to enable or disable idle support.
|
|
|
|
The values are:
|
|
|
|
* 0: idle support is disabled
|
|
* 1: idle support is enabled
|
|
|
|
Default value is 1.
|
|
|
|
It is possible to set the pm_idle_enabled value only if the device
|
|
is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
|
|
|
|
The following example shows how to change the pm_idle_enabled of
|
|
a device::
|
|
|
|
# cat /sys/bus/pci/devices/<BDF>/qat/state
|
|
up
|
|
# cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
|
|
1
|
|
# echo down > /sys/bus/pci/devices/<BDF>/qat/state
|
|
# echo 0 > /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
|
|
# echo up > /sys/bus/pci/devices/<BDF>/qat/state
|
|
# cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
|
|
0
|
|
|
|
This attribute is only available for qat_4xxx devices.
|