linux-stable/arch/arm64/mm/proc.S
Yicong Yang efe7254135 arm64: Add support for FEAT_HAFT
Armv8.9/v9.4 introduces the feature Hardware managed Access Flag
for Table descriptors (FEAT_HAFT). The feature is indicated by
ID_AA64MMFR1_EL1.HAFDBS == 0b0011 and can be enabled by
TCR2_EL1.HAFT so it has a dependency on FEAT_TCR2.

Adds the Kconfig for FEAT_HAFT and support detecting and enabling
the feature. The feature is enabled in __cpu_setup() before MMU on
just like HA. A CPU capability is added to notify the user of the
feature.

Add definition of P{G,4,U,M}D_TABLE_AF bit and set the AF bit
when creating the page table, which will save the hardware
from having to update them at runtime. This will be ignored if
FEAT_HAFT is not enabled.

The AF bit of table descriptors cannot be managed by the software
per spec, unlike the HA. So this should be used only if it's supported
system wide by system_supports_haft().

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20241102104235.62560-4-yangyicong@huawei.com
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[catalin.marinas@arm.com: added the ID check back to __cpu_setup in case of future CPU errata]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-11-05 13:18:35 +00:00

555 lines
13 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Based on arch/arm/mm/proc.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
* Copyright (C) 2012 ARM Ltd.
* Author: Catalin Marinas <catalin.marinas@arm.com>
*/
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/pgtable.h>
#include <linux/cfi_types.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/asm_pointer_auth.h>
#include <asm/hwcap.h>
#include <asm/kernel-pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/cpufeature.h>
#include <asm/alternative.h>
#include <asm/smp.h>
#include <asm/sysreg.h>
#ifdef CONFIG_ARM64_64K_PAGES
#define TCR_TG_FLAGS TCR_TG0_64K | TCR_TG1_64K
#elif defined(CONFIG_ARM64_16K_PAGES)
#define TCR_TG_FLAGS TCR_TG0_16K | TCR_TG1_16K
#else /* CONFIG_ARM64_4K_PAGES */
#define TCR_TG_FLAGS TCR_TG0_4K | TCR_TG1_4K
#endif
#ifdef CONFIG_RANDOMIZE_BASE
#define TCR_KASLR_FLAGS TCR_NFD1
#else
#define TCR_KASLR_FLAGS 0
#endif
/* PTWs cacheable, inner/outer WBWA */
#define TCR_CACHE_FLAGS TCR_IRGN_WBWA | TCR_ORGN_WBWA
#ifdef CONFIG_KASAN_SW_TAGS
#define TCR_KASAN_SW_FLAGS TCR_TBI1 | TCR_TBID1
#else
#define TCR_KASAN_SW_FLAGS 0
#endif
#ifdef CONFIG_KASAN_HW_TAGS
#define TCR_MTE_FLAGS TCR_TCMA1 | TCR_TBI1 | TCR_TBID1
#elif defined(CONFIG_ARM64_MTE)
/*
* The mte_zero_clear_page_tags() implementation uses DC GZVA, which relies on
* TBI being enabled at EL1.
*/
#define TCR_MTE_FLAGS TCR_TBI1 | TCR_TBID1
#else
#define TCR_MTE_FLAGS 0
#endif
/*
* Default MAIR_EL1. MT_NORMAL_TAGGED is initially mapped as Normal memory and
* changed during mte_cpu_setup to Normal Tagged if the system supports MTE.
*/
#define MAIR_EL1_SET \
(MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRnE, MT_DEVICE_nGnRnE) | \
MAIR_ATTRIDX(MAIR_ATTR_DEVICE_nGnRE, MT_DEVICE_nGnRE) | \
MAIR_ATTRIDX(MAIR_ATTR_NORMAL_NC, MT_NORMAL_NC) | \
MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL) | \
MAIR_ATTRIDX(MAIR_ATTR_NORMAL, MT_NORMAL_TAGGED))
#ifdef CONFIG_CPU_PM
/**
* cpu_do_suspend - save CPU registers context
*
* x0: virtual address of context pointer
*
* This must be kept in sync with struct cpu_suspend_ctx in <asm/suspend.h>.
*/
SYM_FUNC_START(cpu_do_suspend)
mrs x2, tpidr_el0
mrs x3, tpidrro_el0
mrs x4, contextidr_el1
mrs x5, osdlr_el1
mrs x6, cpacr_el1
mrs x7, tcr_el1
mrs x8, vbar_el1
mrs x9, mdscr_el1
mrs x10, oslsr_el1
mrs x11, sctlr_el1
get_this_cpu_offset x12
mrs x13, sp_el0
stp x2, x3, [x0]
stp x4, x5, [x0, #16]
stp x6, x7, [x0, #32]
stp x8, x9, [x0, #48]
stp x10, x11, [x0, #64]
stp x12, x13, [x0, #80]
/*
* Save x18 as it may be used as a platform register, e.g. by shadow
* call stack.
*/
str x18, [x0, #96]
ret
SYM_FUNC_END(cpu_do_suspend)
/**
* cpu_do_resume - restore CPU register context
*
* x0: Address of context pointer
*/
SYM_FUNC_START(cpu_do_resume)
ldp x2, x3, [x0]
ldp x4, x5, [x0, #16]
ldp x6, x8, [x0, #32]
ldp x9, x10, [x0, #48]
ldp x11, x12, [x0, #64]
ldp x13, x14, [x0, #80]
/*
* Restore x18, as it may be used as a platform register, and clear
* the buffer to minimize the risk of exposure when used for shadow
* call stack.
*/
ldr x18, [x0, #96]
str xzr, [x0, #96]
msr tpidr_el0, x2
msr tpidrro_el0, x3
msr contextidr_el1, x4
msr cpacr_el1, x6
/* Don't change t0sz here, mask those bits when restoring */
mrs x7, tcr_el1
bfi x8, x7, TCR_T0SZ_OFFSET, TCR_TxSZ_WIDTH
msr tcr_el1, x8
msr vbar_el1, x9
msr mdscr_el1, x10
msr sctlr_el1, x12
set_this_cpu_offset x13
msr sp_el0, x14
/*
* Restore oslsr_el1 by writing oslar_el1
*/
msr osdlr_el1, x5
ubfx x11, x11, #1, #1
msr oslar_el1, x11
reset_pmuserenr_el0 x0 // Disable PMU access from EL0
reset_amuserenr_el0 x0 // Disable AMU access from EL0
alternative_if ARM64_HAS_RAS_EXTN
msr_s SYS_DISR_EL1, xzr
alternative_else_nop_endif
ptrauth_keys_install_kernel_nosync x14, x1, x2, x3
isb
ret
SYM_FUNC_END(cpu_do_resume)
#endif
.pushsection ".idmap.text", "a"
.macro __idmap_cpu_set_reserved_ttbr1, tmp1, tmp2
adrp \tmp1, reserved_pg_dir
phys_to_ttbr \tmp2, \tmp1
offset_ttbr1 \tmp2, \tmp1
msr ttbr1_el1, \tmp2
isb
tlbi vmalle1
dsb nsh
isb
.endm
/*
* void idmap_cpu_replace_ttbr1(phys_addr_t ttbr1)
*
* This is the low-level counterpart to cpu_replace_ttbr1, and should not be
* called by anything else. It can only be executed from a TTBR0 mapping.
*/
SYM_TYPED_FUNC_START(idmap_cpu_replace_ttbr1)
__idmap_cpu_set_reserved_ttbr1 x1, x3
offset_ttbr1 x0, x3
msr ttbr1_el1, x0
isb
ret
SYM_FUNC_END(idmap_cpu_replace_ttbr1)
SYM_FUNC_ALIAS(__pi_idmap_cpu_replace_ttbr1, idmap_cpu_replace_ttbr1)
.popsection
#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
#define KPTI_NG_PTE_FLAGS (PTE_ATTRINDX(MT_NORMAL) | PTE_TYPE_PAGE | \
PTE_AF | PTE_SHARED | PTE_UXN | PTE_WRITE)
.pushsection ".idmap.text", "a"
.macro pte_to_phys, phys, pte
and \phys, \pte, #PTE_ADDR_LOW
#ifdef CONFIG_ARM64_PA_BITS_52
and \pte, \pte, #PTE_ADDR_HIGH
orr \phys, \phys, \pte, lsl #PTE_ADDR_HIGH_SHIFT
#endif
.endm
.macro kpti_mk_tbl_ng, type, num_entries
add end_\type\()p, cur_\type\()p, #\num_entries * 8
.Ldo_\type:
ldr \type, [cur_\type\()p], #8 // Load the entry and advance
tbz \type, #0, .Lnext_\type // Skip invalid and
tbnz \type, #11, .Lnext_\type // non-global entries
orr \type, \type, #PTE_NG // Same bit for blocks and pages
str \type, [cur_\type\()p, #-8] // Update the entry
.ifnc \type, pte
tbnz \type, #1, .Lderef_\type
.endif
.Lnext_\type:
cmp cur_\type\()p, end_\type\()p
b.ne .Ldo_\type
.endm
/*
* Dereference the current table entry and map it into the temporary
* fixmap slot associated with the current level.
*/
.macro kpti_map_pgtbl, type, level
str xzr, [temp_pte, #8 * (\level + 2)] // break before make
dsb nshst
add pte, temp_pte, #PAGE_SIZE * (\level + 2)
lsr pte, pte, #12
tlbi vaae1, pte
dsb nsh
isb
phys_to_pte pte, cur_\type\()p
add cur_\type\()p, temp_pte, #PAGE_SIZE * (\level + 2)
orr pte, pte, pte_flags
str pte, [temp_pte, #8 * (\level + 2)]
dsb nshst
.endm
/*
* void __kpti_install_ng_mappings(int cpu, int num_secondaries, phys_addr_t temp_pgd,
* unsigned long temp_pte_va)
*
* Called exactly once from stop_machine context by each CPU found during boot.
*/
.pushsection ".data", "aw", %progbits
SYM_DATA(__idmap_kpti_flag, .long 1)
.popsection
SYM_TYPED_FUNC_START(idmap_kpti_install_ng_mappings)
cpu .req w0
temp_pte .req x0
num_cpus .req w1
pte_flags .req x1
temp_pgd_phys .req x2
swapper_ttb .req x3
flag_ptr .req x4
cur_pgdp .req x5
end_pgdp .req x6
pgd .req x7
cur_pudp .req x8
end_pudp .req x9
cur_pmdp .req x11
end_pmdp .req x12
cur_ptep .req x14
end_ptep .req x15
pte .req x16
valid .req x17
cur_p4dp .req x19
end_p4dp .req x20
mov x5, x3 // preserve temp_pte arg
mrs swapper_ttb, ttbr1_el1
adr_l flag_ptr, __idmap_kpti_flag
cbnz cpu, __idmap_kpti_secondary
#if CONFIG_PGTABLE_LEVELS > 4
stp x29, x30, [sp, #-32]!
mov x29, sp
stp x19, x20, [sp, #16]
#endif
/* We're the boot CPU. Wait for the others to catch up */
sevl
1: wfe
ldaxr w17, [flag_ptr]
eor w17, w17, num_cpus
cbnz w17, 1b
/* Switch to the temporary page tables on this CPU only */
__idmap_cpu_set_reserved_ttbr1 x8, x9
offset_ttbr1 temp_pgd_phys, x8
msr ttbr1_el1, temp_pgd_phys
isb
mov temp_pte, x5
mov_q pte_flags, KPTI_NG_PTE_FLAGS
/* Everybody is enjoying the idmap, so we can rewrite swapper. */
#ifdef CONFIG_ARM64_LPA2
/*
* If LPA2 support is configured, but 52-bit virtual addressing is not
* enabled at runtime, we will fall back to one level of paging less,
* and so we have to walk swapper_pg_dir as if we dereferenced its
* address from a PGD level entry, and terminate the PGD level loop
* right after.
*/
adrp pgd, swapper_pg_dir // walk &swapper_pg_dir at the next level
mov cur_pgdp, end_pgdp // must be equal to terminate the PGD loop
alternative_if_not ARM64_HAS_VA52
b .Lderef_pgd // skip to the next level
alternative_else_nop_endif
/*
* LPA2 based 52-bit virtual addressing requires 52-bit physical
* addressing to be enabled as well. In this case, the shareability
* bits are repurposed as physical address bits, and should not be
* set in pte_flags.
*/
bic pte_flags, pte_flags, #PTE_SHARED
#endif
/* PGD */
adrp cur_pgdp, swapper_pg_dir
kpti_map_pgtbl pgd, -1
kpti_mk_tbl_ng pgd, PTRS_PER_PGD
/* Ensure all the updated entries are visible to secondary CPUs */
dsb ishst
/* We're done: fire up swapper_pg_dir again */
__idmap_cpu_set_reserved_ttbr1 x8, x9
msr ttbr1_el1, swapper_ttb
isb
/* Set the flag to zero to indicate that we're all done */
str wzr, [flag_ptr]
#if CONFIG_PGTABLE_LEVELS > 4
ldp x19, x20, [sp, #16]
ldp x29, x30, [sp], #32
#endif
ret
.Lderef_pgd:
/* P4D */
.if CONFIG_PGTABLE_LEVELS > 4
p4d .req x30
pte_to_phys cur_p4dp, pgd
kpti_map_pgtbl p4d, 0
kpti_mk_tbl_ng p4d, PTRS_PER_P4D
b .Lnext_pgd
.else /* CONFIG_PGTABLE_LEVELS <= 4 */
p4d .req pgd
.set .Lnext_p4d, .Lnext_pgd
.endif
.Lderef_p4d:
/* PUD */
.if CONFIG_PGTABLE_LEVELS > 3
pud .req x10
pte_to_phys cur_pudp, p4d
kpti_map_pgtbl pud, 1
kpti_mk_tbl_ng pud, PTRS_PER_PUD
b .Lnext_p4d
.else /* CONFIG_PGTABLE_LEVELS <= 3 */
pud .req pgd
.set .Lnext_pud, .Lnext_pgd
.endif
.Lderef_pud:
/* PMD */
.if CONFIG_PGTABLE_LEVELS > 2
pmd .req x13
pte_to_phys cur_pmdp, pud
kpti_map_pgtbl pmd, 2
kpti_mk_tbl_ng pmd, PTRS_PER_PMD
b .Lnext_pud
.else /* CONFIG_PGTABLE_LEVELS <= 2 */
pmd .req pgd
.set .Lnext_pmd, .Lnext_pgd
.endif
.Lderef_pmd:
/* PTE */
pte_to_phys cur_ptep, pmd
kpti_map_pgtbl pte, 3
kpti_mk_tbl_ng pte, PTRS_PER_PTE
b .Lnext_pmd
.unreq cpu
.unreq temp_pte
.unreq num_cpus
.unreq pte_flags
.unreq temp_pgd_phys
.unreq cur_pgdp
.unreq end_pgdp
.unreq pgd
.unreq cur_pudp
.unreq end_pudp
.unreq pud
.unreq cur_pmdp
.unreq end_pmdp
.unreq pmd
.unreq cur_ptep
.unreq end_ptep
.unreq pte
.unreq valid
.unreq cur_p4dp
.unreq end_p4dp
.unreq p4d
/* Secondary CPUs end up here */
__idmap_kpti_secondary:
/* Uninstall swapper before surgery begins */
__idmap_cpu_set_reserved_ttbr1 x16, x17
/* Increment the flag to let the boot CPU we're ready */
1: ldxr w16, [flag_ptr]
add w16, w16, #1
stxr w17, w16, [flag_ptr]
cbnz w17, 1b
/* Wait for the boot CPU to finish messing around with swapper */
sevl
1: wfe
ldxr w16, [flag_ptr]
cbnz w16, 1b
/* All done, act like nothing happened */
msr ttbr1_el1, swapper_ttb
isb
ret
.unreq swapper_ttb
.unreq flag_ptr
SYM_FUNC_END(idmap_kpti_install_ng_mappings)
.popsection
#endif
/*
* __cpu_setup
*
* Initialise the processor for turning the MMU on.
*
* Output:
* Return in x0 the value of the SCTLR_EL1 register.
*/
.pushsection ".idmap.text", "a"
SYM_FUNC_START(__cpu_setup)
tlbi vmalle1 // Invalidate local TLB
dsb nsh
msr cpacr_el1, xzr // Reset cpacr_el1
mov x1, #1 << 12 // Reset mdscr_el1 and disable
msr mdscr_el1, x1 // access to the DCC from EL0
reset_pmuserenr_el0 x1 // Disable PMU access from EL0
reset_amuserenr_el0 x1 // Disable AMU access from EL0
/*
* Default values for VMSA control registers. These will be adjusted
* below depending on detected CPU features.
*/
mair .req x17
tcr .req x16
tcr2 .req x15
mov_q mair, MAIR_EL1_SET
mov_q tcr, TCR_T0SZ(IDMAP_VA_BITS) | TCR_T1SZ(VA_BITS_MIN) | TCR_CACHE_FLAGS | \
TCR_SHARED | TCR_TG_FLAGS | TCR_KASLR_FLAGS | TCR_ASID16 | \
TCR_TBI0 | TCR_A1 | TCR_KASAN_SW_FLAGS | TCR_MTE_FLAGS
mov tcr2, xzr
tcr_clear_errata_bits tcr, x9, x5
#ifdef CONFIG_ARM64_VA_BITS_52
mov x9, #64 - VA_BITS
alternative_if ARM64_HAS_VA52
tcr_set_t1sz tcr, x9
#ifdef CONFIG_ARM64_LPA2
orr tcr, tcr, #TCR_DS
#endif
alternative_else_nop_endif
#endif
/*
* Set the IPS bits in TCR_EL1.
*/
tcr_compute_pa_size tcr, #TCR_IPS_SHIFT, x5, x6
#ifdef CONFIG_ARM64_HW_AFDBM
/*
* Enable hardware update of the Access Flags bit.
* Hardware dirty bit management is enabled later,
* via capabilities.
*/
mrs x9, ID_AA64MMFR1_EL1
ubfx x9, x9, ID_AA64MMFR1_EL1_HAFDBS_SHIFT, #4
cbz x9, 1f
orr tcr, tcr, #TCR_HA // hardware Access flag update
#ifdef CONFIG_ARM64_HAFT
cmp x9, ID_AA64MMFR1_EL1_HAFDBS_HAFT
b.lt 1f
orr tcr2, tcr2, TCR2_EL1x_HAFT
#endif /* CONFIG_ARM64_HAFT */
1:
#endif /* CONFIG_ARM64_HW_AFDBM */
msr mair_el1, mair
msr tcr_el1, tcr
mrs_s x1, SYS_ID_AA64MMFR3_EL1
ubfx x1, x1, #ID_AA64MMFR3_EL1_S1PIE_SHIFT, #4
cbz x1, .Lskip_indirection
/*
* The PROT_* macros describing the various memory types may resolve to
* C expressions if they include the PTE_MAYBE_* macros, and so they
* can only be used from C code. The PIE_E* constants below are also
* defined in terms of those macros, but will mask out those
* PTE_MAYBE_* constants, whether they are set or not. So #define them
* as 0x0 here so we can evaluate the PIE_E* constants in asm context.
*/
#define PTE_MAYBE_NG 0
#define PTE_MAYBE_SHARED 0
mov_q x0, PIE_E0
msr REG_PIRE0_EL1, x0
mov_q x0, PIE_E1
msr REG_PIR_EL1, x0
#undef PTE_MAYBE_NG
#undef PTE_MAYBE_SHARED
orr tcr2, tcr2, TCR2_EL1x_PIE
.Lskip_indirection:
mrs_s x1, SYS_ID_AA64MMFR3_EL1
ubfx x1, x1, #ID_AA64MMFR3_EL1_TCRX_SHIFT, #4
cbz x1, 1f
msr REG_TCR2_EL1, tcr2
1:
/*
* Prepare SCTLR
*/
mov_q x0, INIT_SCTLR_EL1_MMU_ON
ret // return to head.S
.unreq mair
.unreq tcr
.unreq tcr2
SYM_FUNC_END(__cpu_setup)