mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2025-01-09 22:50:41 +00:00
246a1c4c6b
The pata_parport is a libata-based replacement of the old PARIDE subsystem - driver for parallel port IDE devices. It uses the original paride low-level protocol drivers but does not need the high-level drivers (pd, pcd, pf, pt, pg). The IDE devices behind parallel port adapters are handled by the ATA layer. This will allow paride and its high-level drivers to be removed. Unfortunately, libata drivers cannot sleep so pata_parport claims parport before activating the ata host and keeps it claimed (and protocol connected) until the ata host is removed. This means that no devices can be chained (neither other pata_parport devices nor a printer). paride and pata_parport are mutually exclusive because the compiled protocol drivers are incompatible. Tested with: - Imation SuperDisk LS-120 and HP C4381A (EPAT) - Freecom Parallel CD (FRPW) - Toshiba Mobile CD-RW 2793008 w/Freecom Parallel Cable rev.903 (FRIQ) - Backpack CD-RW 222011 and CD-RW 19350 (BPCK6) The following bugs in low-level protocol drivers were found and will be fixed later: Note: EPP-32 mode is buggy in EPAT - and also in all other protocol drivers - they don't handle non-multiple-of-4 block transfers correctly. This causes problems with LS-120 drive. There is also another bug in EPAT: EPP modes don't work unless a 4-bit or 8-bit mode is used first (probably some initialization missing?). Once the device is initialized, EPP works until power cycle. So after device power on, you have to: echo "parport0 epat 0" >/sys/bus/pata_parport/new_device echo pata_parport.0 >/sys/bus/pata_parport/delete_device echo "parport0 epat 4" >/sys/bus/pata_parport/new_device (autoprobe will initialize correctly as it tries the slowest modes first but you'll get the broken EPP-32 mode) Note: EPP modes are buggy in FRPW, only modes 0 and 1 work. Signed-off-by: Ondrej Zary <linux@zary.sk> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
112 lines
3.4 KiB
C
112 lines
3.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* pata_parport.h (c) 1997-8 Grant R. Guenther <grant@torque.net>
|
|
* Under the terms of the GPL.
|
|
*
|
|
* This file defines the interface for parallel port IDE adapter chip drivers.
|
|
*/
|
|
|
|
#ifndef LINUX_PATA_PARPORT_H
|
|
#define LINUX_PATA_PARPORT_H
|
|
|
|
#include <linux/libata.h>
|
|
|
|
#define PI_PCD 1 /* dummy for paride protocol modules */
|
|
|
|
struct pi_adapter {
|
|
struct device dev;
|
|
struct pi_protocol *proto; /* adapter protocol */
|
|
int port; /* base address of parallel port */
|
|
int mode; /* transfer mode in use */
|
|
int delay; /* adapter delay setting */
|
|
int devtype; /* dummy for paride protocol modules */
|
|
char *device; /* dummy for paride protocol modules */
|
|
int unit; /* unit number for chained adapters */
|
|
int saved_r0; /* saved port state */
|
|
int saved_r2; /* saved port state */
|
|
unsigned long private; /* for protocol module */
|
|
struct pardevice *pardev; /* pointer to pardevice */
|
|
};
|
|
|
|
typedef struct pi_adapter PIA; /* for paride protocol modules */
|
|
|
|
/* registers are addressed as (cont,regr)
|
|
* cont: 0 for command register file, 1 for control register(s)
|
|
* regr: 0-7 for register number.
|
|
*/
|
|
|
|
/* macros and functions exported to the protocol modules */
|
|
#define delay_p (pi->delay ? udelay(pi->delay) : (void)0)
|
|
#define out_p(offs, byte) do { outb(byte, pi->port + offs); delay_p; } while (0)
|
|
#define in_p(offs) (delay_p, inb(pi->port + offs))
|
|
|
|
#define w0(byte) out_p(0, byte)
|
|
#define r0() in_p(0)
|
|
#define w1(byte) out_p(1, byte)
|
|
#define r1() in_p(1)
|
|
#define w2(byte) out_p(2, byte)
|
|
#define r2() in_p(2)
|
|
#define w3(byte) out_p(3, byte)
|
|
#define w4(byte) out_p(4, byte)
|
|
#define r4() in_p(4)
|
|
#define w4w(data) do { outw(data, pi->port + 4); delay_p; } while (0)
|
|
#define w4l(data) do { outl(data, pi->port + 4); delay_p; } while (0)
|
|
#define r4w() (delay_p, inw(pi->port + 4))
|
|
#define r4l() (delay_p, inl(pi->port + 4))
|
|
|
|
static inline u16 pi_swab16(char *b, int k)
|
|
{
|
|
union { u16 u; char t[2]; } r;
|
|
|
|
r.t[0] = b[2 * k + 1]; r.t[1] = b[2 * k];
|
|
return r.u;
|
|
}
|
|
|
|
static inline u32 pi_swab32(char *b, int k)
|
|
{
|
|
union { u32 u; char f[4]; } r;
|
|
|
|
r.f[0] = b[4 * k + 1]; r.f[1] = b[4 * k];
|
|
r.f[2] = b[4 * k + 3]; r.f[3] = b[4 * k + 2];
|
|
return r.u;
|
|
}
|
|
|
|
struct pi_protocol {
|
|
char name[8];
|
|
|
|
int max_mode;
|
|
int epp_first; /* modes >= this use 8 ports */
|
|
|
|
int default_delay;
|
|
int max_units; /* max chained units probed for */
|
|
|
|
void (*write_regr)(struct pi_adapter *pi, int cont, int regr, int val);
|
|
int (*read_regr)(struct pi_adapter *pi, int cont, int regr);
|
|
void (*write_block)(struct pi_adapter *pi, char *buf, int count);
|
|
void (*read_block)(struct pi_adapter *pi, char *buf, int count);
|
|
|
|
void (*connect)(struct pi_adapter *pi);
|
|
void (*disconnect)(struct pi_adapter *pi);
|
|
|
|
int (*test_port)(struct pi_adapter *pi);
|
|
int (*probe_unit)(struct pi_adapter *pi);
|
|
int (*test_proto)(struct pi_adapter *pi, char *scratch, int verbose);
|
|
void (*log_adapter)(struct pi_adapter *pi, char *scratch, int verbose);
|
|
|
|
int (*init_proto)(struct pi_adapter *pi);
|
|
void (*release_proto)(struct pi_adapter *pi);
|
|
struct module *owner;
|
|
struct device_driver driver;
|
|
struct scsi_host_template sht;
|
|
};
|
|
|
|
#define PATA_PARPORT_SHT ATA_PIO_SHT
|
|
|
|
int pata_parport_register_driver(struct pi_protocol *pr);
|
|
void pata_parport_unregister_driver(struct pi_protocol *pr);
|
|
/* defines for old paride protocol modules */
|
|
#define paride_register pata_parport_register_driver
|
|
#define paride_unregister pata_parport_unregister_driver
|
|
|
|
#endif /* LINUX_PATA_PARPORT_H */
|