Eric Dumazet c4e86b4363 net: add two more call_rcu_hurry()
I had failures with pmtu.sh selftests lately,
with netns dismantles firing ref_tracking alerts [1].

After much debugging, I found that some queued
rcu callbacks were delayed by minutes, because
of CONFIG_RCU_LAZY=y option.

Joel Fernandes had a similar issue in the past,
fixed with commit 483c26ff63f4 ("net: Use call_rcu_hurry()
for dst_release()")

In this commit, I make sure nexthop_free_rcu()
and free_fib_info_rcu() are not delayed too much
because they both can release device references.

tools/testing/selftests/net/pmtu.sh no longer fails.

Traces were:

[  968.179860] ref_tracker: veth_A-R1@00000000d0ff3fe2 has 3/5 users at
                    dst_alloc+0x76/0x160
                    ip6_dst_alloc+0x25/0x80
                    ip6_pol_route+0x2a8/0x450
                    ip6_pol_route_output+0x1f/0x30
                    fib6_rule_lookup+0x163/0x270
                    ip6_route_output_flags+0xda/0x190
                    ip6_dst_lookup_tail.constprop.0+0x1d0/0x260
                    ip6_dst_lookup_flow+0x47/0xa0
                    udp_tunnel6_dst_lookup+0x158/0x210
                    vxlan_xmit_one+0x4c2/0x1550 [vxlan]
                    vxlan_xmit+0x52d/0x14f0 [vxlan]
                    dev_hard_start_xmit+0x7b/0x1e0
                    __dev_queue_xmit+0x20b/0xe40
                    ip6_finish_output2+0x2ea/0x6e0
                    ip6_finish_output+0x143/0x320
                    ip6_output+0x74/0x140

[  968.179860] ref_tracker: veth_A-R1@00000000d0ff3fe2 has 1/5 users at
                    netdev_get_by_index+0xc0/0xe0
                    fib6_nh_init+0x1a9/0xa90
                    rtm_new_nexthop+0x6fa/0x1580
                    rtnetlink_rcv_msg+0x155/0x3e0
                    netlink_rcv_skb+0x61/0x110
                    rtnetlink_rcv+0x19/0x20
                    netlink_unicast+0x23f/0x380
                    netlink_sendmsg+0x1fc/0x430
                    ____sys_sendmsg+0x2ef/0x320
                    ___sys_sendmsg+0x86/0xd0
                    __sys_sendmsg+0x67/0xc0
                    __x64_sys_sendmsg+0x21/0x30
                    x64_sys_call+0x252/0x2030
                    do_syscall_64+0x6c/0x190
                    entry_SYSCALL_64_after_hwframe+0x76/0x7e

[  968.179860] ref_tracker: veth_A-R1@00000000d0ff3fe2 has 1/5 users at
                    ipv6_add_dev+0x136/0x530
                    addrconf_notify+0x19d/0x770
                    notifier_call_chain+0x65/0xd0
                    raw_notifier_call_chain+0x1a/0x20
                    call_netdevice_notifiers_info+0x54/0x90
                    register_netdevice+0x61e/0x790
                    veth_newlink+0x230/0x440
                    __rtnl_newlink+0x7d2/0xaa0
                    rtnl_newlink+0x4c/0x70
                    rtnetlink_rcv_msg+0x155/0x3e0
                    netlink_rcv_skb+0x61/0x110
                    rtnetlink_rcv+0x19/0x20
                    netlink_unicast+0x23f/0x380
                    netlink_sendmsg+0x1fc/0x430
                    ____sys_sendmsg+0x2ef/0x320
                    ___sys_sendmsg+0x86/0xd0
....
[ 1079.316024]  ? show_regs+0x68/0x80
[ 1079.316087]  ? __warn+0x8c/0x140
[ 1079.316103]  ? ref_tracker_free+0x1a0/0x270
[ 1079.316117]  ? report_bug+0x196/0x1c0
[ 1079.316135]  ? handle_bug+0x42/0x80
[ 1079.316149]  ? exc_invalid_op+0x1c/0x70
[ 1079.316162]  ? asm_exc_invalid_op+0x1f/0x30
[ 1079.316193]  ? ref_tracker_free+0x1a0/0x270
[ 1079.316208]  ? _raw_spin_unlock+0x1a/0x40
[ 1079.316222]  ? free_unref_page+0x126/0x1a0
[ 1079.316239]  ? destroy_large_folio+0x69/0x90
[ 1079.316251]  ? __folio_put+0x99/0xd0
[ 1079.316276]  dst_dev_put+0x69/0xd0
[ 1079.316308]  fib6_nh_release_dsts.part.0+0x3d/0x80
[ 1079.316327]  fib6_nh_release+0x45/0x70
[ 1079.316340]  nexthop_free_rcu+0x131/0x170
[ 1079.316356]  rcu_do_batch+0x1ee/0x820
[ 1079.316370]  ? rcu_do_batch+0x179/0x820
[ 1079.316388]  rcu_core+0x1aa/0x4d0
[ 1079.316405]  rcu_core_si+0x12/0x20
[ 1079.316417]  __do_softirq+0x13a/0x3dc
[ 1079.316435]  __irq_exit_rcu+0xa3/0x110
[ 1079.316449]  irq_exit_rcu+0x12/0x30
[ 1079.316462]  sysvec_apic_timer_interrupt+0x5b/0xe0
[ 1079.316474]  asm_sysvec_apic_timer_interrupt+0x1f/0x30
[ 1079.316569] RIP: 0033:0x7f06b65c63f0

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240423205408.39632-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25 15:24:23 -07:00
2024-04-20 11:28:02 -07:00
2024-04-25 15:24:23 -07:00
2024-03-21 14:41:00 -07:00
2024-03-18 15:11:44 -07:00
2024-01-18 17:57:07 -08:00
2022-09-28 09:02:20 +02:00
2022-10-10 12:00:45 -07:00
2024-04-21 12:35:54 -07:00
2024-03-18 03:36:32 -06:00

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
Description
Linux kernel stable tree
Readme 6.1 GiB
Languages
C 97.5%
Assembly 1%
Shell 0.6%
Python 0.3%
Makefile 0.3%