linux-stable/drivers/clk/clk_test.c
Linus Torvalds 9f3a2ba62c The core framework gained a clk provider helper, a clk consumer helper, and
some unit tests for the assigned clk rates feature in DeviceTree. On the vendor
 driver side, we gained a whole pile of SoC driver support detailed below. The
 majority in the diffstat is Qualcomm, but there's also quite a few Samsung and
 Mediatek clk driver additions in here as well. The top vendors is quite common,
 but the sheer amount of new drivers is uncommon, so I'm anticipating a larger
 number of fixes for clk drivers this cycle.
 
 Core:
  - devm_clk_bulk_get_all_enabled() to return number of clks acquired
  - devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
  - KUnit tests for clk-assigned-rates{,-u64}
 
 New Drivers:
  - Marvell PXA1908 SoC clks
  - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
  - TWL6030 clk driver
  - Nuvoton Arbel BMC NPCM8XX SoC clks
  - MediaTek MT6735 SoC clks
  - MediaTek MT7620, MT7628 and MT7688 MMC clks
  - Add a driver for gated fixed rate clocks
  - Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
  - Camera, display and video clock controllers for Qualcomm SA8775P SoCs
  - Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm SAR2130P
  - Global, camera, display, GPU, and video clock controllers for Qualcomm
    SM8475 SoCs
  - RTC power domain and Battery Backup Function (VBATTB) clock support for the
    Renesas RZ/G3S SoC
  - Qualcomm IPQ9574 alpha PLLs
  - Support for i.MX91 CCM in the i.MX93 driver
  - Microchip LAN969X SoC clks
  - Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and reset on
    Renesas RZ/V2H(P)
  - Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
  - Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
 
 Updates:
  - Convert more clk bindings to YAML
  - Various clk driver cleanups: NULL checks, add const, etc.
  - Remove END/NUM #defines that count number of clks in various binding headers
  - Continue moving reset drivers to drivers/reset via auxiliary bus
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmc/r1kRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUlaw/+NkmTMPSpgKy8NfZi6KoCk3U5llaknXvj
 Y/Y2pB7UpOFDTsSCKRcFrZ6JWS6GIogE70W9w+zxIht4QA4Ekd9vKT7VRhMl+8t/
 pz2i0c0Pm24hSye9LKM7JCVIVL8SNYonOs3wC1sfMVMDoUikVwupj6Bmj0nAYrBo
 hbJFBXtn/LbyYImJQ9hYqHnUtJKGp/N7hhpGu6kT/lbzcaWsBMp4lhH+s20DJz5e
 kdJVJGaLOELerAG/SHIxh9obtfznvex6x3itTB0o/d6/1DSDjjlxnZH8YV8eQWk0
 kK+ORuewA+qCi3RiPReHCPBIfPI4HL0z3k5JFA5eI7eD4VZIis+YBOa/Y8bQR9bG
 wDg5qh5su0fdeWBUvkFB03igNoMdtH68iYd2q3YE0ka95FGulcyvbqoyxTJnjIxW
 328PizYZV8LQ4+LGSdIFyp9f/SrjF0pAt7yTF8Dis3jq3ul/6ELX9G6OCNgtGKQz
 p0Hb01fKC4s7w48QI5OXQKfS382vS8G8a2NIwt2xxorc4+Dr2rjPvlDhErshCOAT
 nDEerIjGWr/0rQeTGxg+SLUx5ytq2aBkysg95/9WVe3b8kZeePiW9gEH4tgealY8
 eHzFvbqXutlKer0xLOYiLd3hOeHhkCJNj48QS8jVXtRGGeLjZONw5F1mjTNskPpx
 9jbKMcDjGyc=
 =FqLm
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework gained a clk provider helper, a clk consumer
  helper, and some unit tests for the assigned clk rates feature in
  DeviceTree. On the vendor driver side, we gained a whole pile of SoC
  driver support detailed below. The majority in the diffstat is
  Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
  additions in here as well. The top vendors is quite common, but the
  sheer amount of new drivers is uncommon, so I'm anticipating a larger
  number of fixes for clk drivers this cycle.

  Core:
   - devm_clk_bulk_get_all_enabled() to return number of clks acquired
   - devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
   - KUnit tests for clk-assigned-rates{,-u64}

  New Drivers:
   - Marvell PXA1908 SoC clks
   - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
   - TWL6030 clk driver
   - Nuvoton Arbel BMC NPCM8XX SoC clks
   - MediaTek MT6735 SoC clks
   - MediaTek MT7620, MT7628 and MT7688 MMC clks
   - Add a driver for gated fixed rate clocks
   - Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
   - Camera, display and video clock controllers for Qualcomm SA8775P
     SoCs
   - Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
     SAR2130P
   - Global, camera, display, GPU, and video clock controllers for
     Qualcomm SM8475 SoCs
   - RTC power domain and Battery Backup Function (VBATTB) clock support
     for the Renesas RZ/G3S SoC
   - Qualcomm IPQ9574 alpha PLLs
   - Support for i.MX91 CCM in the i.MX93 driver
   - Microchip LAN969X SoC clks
   - Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
     reset on Renesas RZ/V2H(P)
   - Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
   - Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP

  Updates:
   - Convert more clk bindings to YAML
   - Various clk driver cleanups: NULL checks, add const, etc.
   - Remove END/NUM #defines that count number of clks in various
     binding headers
   - Continue moving reset drivers to drivers/reset via auxiliary bus"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
  clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
  clk: Fix invalid execution of clk_set_rate
  clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
  clk: lan966x: make it selectable for ARCH_LAN969X
  clk: eyeq: add EyeQ6H west fixed factor clocks
  clk: eyeq: add EyeQ6H central fixed factor clocks
  clk: eyeq: add EyeQ5 fixed factor clocks
  clk: eyeq: add fixed factor clocks infrastructure
  clk: eyeq: require clock index with phandle in all cases
  clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
  dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
  dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
  clk: clk-axi-clkgen: make sure to enable the AXI bus clock
  dt-bindings: clock: axi-clkgen: include AXI clk
  clk: mmp: Add Marvell PXA1908 MPMU driver
  clk: mmp: Add Marvell PXA1908 APMU driver
  clk: mmp: Add Marvell PXA1908 APBCP driver
  clk: mmp: Add Marvell PXA1908 APBC driver
  dt-bindings: clock: Add Marvell PXA1908 clock bindings
  clk: mmp: Switch to use struct u32_fract instead of custom one
  ...
2024-11-22 17:02:25 -08:00

3418 lines
96 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Kunit tests for clk framework
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/clk-conf.h>
#include <linux/of.h>
#include <linux/platform_device.h>
/* Needed for clk_hw_get_clk() */
#include "clk.h"
#include <kunit/clk.h>
#include <kunit/of.h>
#include <kunit/platform_device.h>
#include <kunit/test.h>
#include "kunit_clk_assigned_rates.h"
#include "clk_parent_data_test.h"
static const struct clk_ops empty_clk_ops = { };
#define DUMMY_CLOCK_INIT_RATE (42 * 1000 * 1000)
#define DUMMY_CLOCK_RATE_1 (142 * 1000 * 1000)
#define DUMMY_CLOCK_RATE_2 (242 * 1000 * 1000)
struct clk_dummy_context {
struct clk_hw hw;
unsigned long rate;
};
static unsigned long clk_dummy_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_dummy_context *ctx =
container_of(hw, struct clk_dummy_context, hw);
return ctx->rate;
}
static int clk_dummy_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
/* Just return the same rate without modifying it */
return 0;
}
static int clk_dummy_maximize_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
/*
* If there's a maximum set, always run the clock at the maximum
* allowed.
*/
if (req->max_rate < ULONG_MAX)
req->rate = req->max_rate;
return 0;
}
static int clk_dummy_minimize_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
/*
* If there's a minimum set, always run the clock at the minimum
* allowed.
*/
if (req->min_rate > 0)
req->rate = req->min_rate;
return 0;
}
static int clk_dummy_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
struct clk_dummy_context *ctx =
container_of(hw, struct clk_dummy_context, hw);
ctx->rate = rate;
return 0;
}
static int clk_dummy_single_set_parent(struct clk_hw *hw, u8 index)
{
if (index >= clk_hw_get_num_parents(hw))
return -EINVAL;
return 0;
}
static u8 clk_dummy_single_get_parent(struct clk_hw *hw)
{
return 0;
}
static const struct clk_ops clk_dummy_rate_ops = {
.recalc_rate = clk_dummy_recalc_rate,
.determine_rate = clk_dummy_determine_rate,
.set_rate = clk_dummy_set_rate,
};
static const struct clk_ops clk_dummy_maximize_rate_ops = {
.recalc_rate = clk_dummy_recalc_rate,
.determine_rate = clk_dummy_maximize_rate,
.set_rate = clk_dummy_set_rate,
};
static const struct clk_ops clk_dummy_minimize_rate_ops = {
.recalc_rate = clk_dummy_recalc_rate,
.determine_rate = clk_dummy_minimize_rate,
.set_rate = clk_dummy_set_rate,
};
static const struct clk_ops clk_dummy_single_parent_ops = {
/*
* FIXME: Even though we should probably be able to use
* __clk_mux_determine_rate() here, if we use it and call
* clk_round_rate() or clk_set_rate() with a rate lower than
* what all the parents can provide, it will return -EINVAL.
*
* This is due to the fact that it has the undocumented
* behaviour to always pick up the closest rate higher than the
* requested rate. If we get something lower, it thus considers
* that it's not acceptable and will return an error.
*
* It's somewhat inconsistent and creates a weird threshold
* between rates above the parent rate which would be rounded to
* what the parent can provide, but rates below will simply
* return an error.
*/
.determine_rate = __clk_mux_determine_rate_closest,
.set_parent = clk_dummy_single_set_parent,
.get_parent = clk_dummy_single_get_parent,
};
struct clk_multiple_parent_ctx {
struct clk_dummy_context parents_ctx[2];
struct clk_hw hw;
u8 current_parent;
};
static int clk_multiple_parents_mux_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_multiple_parent_ctx *ctx =
container_of(hw, struct clk_multiple_parent_ctx, hw);
if (index >= clk_hw_get_num_parents(hw))
return -EINVAL;
ctx->current_parent = index;
return 0;
}
static u8 clk_multiple_parents_mux_get_parent(struct clk_hw *hw)
{
struct clk_multiple_parent_ctx *ctx =
container_of(hw, struct clk_multiple_parent_ctx, hw);
return ctx->current_parent;
}
static const struct clk_ops clk_multiple_parents_mux_ops = {
.get_parent = clk_multiple_parents_mux_get_parent,
.set_parent = clk_multiple_parents_mux_set_parent,
.determine_rate = __clk_mux_determine_rate_closest,
};
static const struct clk_ops clk_multiple_parents_no_reparent_mux_ops = {
.determine_rate = clk_hw_determine_rate_no_reparent,
.get_parent = clk_multiple_parents_mux_get_parent,
.set_parent = clk_multiple_parents_mux_set_parent,
};
static int clk_test_init_with_ops(struct kunit *test, const struct clk_ops *ops)
{
struct clk_dummy_context *ctx;
struct clk_init_data init = { };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->rate = DUMMY_CLOCK_INIT_RATE;
test->priv = ctx;
init.name = "test_dummy_rate";
init.ops = ops;
ctx->hw.init = &init;
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static int clk_test_init(struct kunit *test)
{
return clk_test_init_with_ops(test, &clk_dummy_rate_ops);
}
static int clk_maximize_test_init(struct kunit *test)
{
return clk_test_init_with_ops(test, &clk_dummy_maximize_rate_ops);
}
static int clk_minimize_test_init(struct kunit *test)
{
return clk_test_init_with_ops(test, &clk_dummy_minimize_rate_ops);
}
static void clk_test_exit(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
}
/*
* Test that the actual rate matches what is returned by clk_get_rate()
*/
static void clk_test_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, ctx->rate);
clk_put(clk);
}
/*
* Test that, after a call to clk_set_rate(), the rate returned by
* clk_get_rate() matches.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_test_set_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that, after several calls to clk_set_rate(), the rate returned
* by clk_get_rate() matches the last one.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_test_set_set_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that clk_round_rate and clk_set_rate are consitent and will
* return the same frequency.
*/
static void clk_test_round_set_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long set_rate;
long rounded_rate;
rounded_rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_GT(test, rounded_rate, 0);
KUNIT_EXPECT_EQ(test, rounded_rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
0);
set_rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, set_rate, 0);
KUNIT_EXPECT_EQ(test, rounded_rate, set_rate);
clk_put(clk);
}
static struct kunit_case clk_test_cases[] = {
KUNIT_CASE(clk_test_get_rate),
KUNIT_CASE(clk_test_set_get_rate),
KUNIT_CASE(clk_test_set_set_get_rate),
KUNIT_CASE(clk_test_round_set_get_rate),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate API with simple scenarios
*/
static struct kunit_suite clk_test_suite = {
.name = "clk-test",
.init = clk_test_init,
.exit = clk_test_exit,
.test_cases = clk_test_cases,
};
static int clk_uncached_test_init(struct kunit *test)
{
struct clk_dummy_context *ctx;
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->rate = DUMMY_CLOCK_INIT_RATE;
ctx->hw.init = CLK_HW_INIT_NO_PARENT("test-clk",
&clk_dummy_rate_ops,
CLK_GET_RATE_NOCACHE);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
/*
* Test that for an uncached clock, the clock framework doesn't cache
* the rate and clk_get_rate() will return the underlying clock rate
* even if it changed.
*/
static void clk_test_uncached_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
/* We change the rate behind the clock framework's back */
ctx->rate = DUMMY_CLOCK_RATE_1;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that for an uncached clock, clk_set_rate_range() will work
* properly if the rate hasn't changed.
*/
static void clk_test_uncached_set_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that for an uncached clock, clk_set_rate_range() will work
* properly if the rate has changed in hardware.
*
* In this case, it means that if the rate wasn't initially in the range
* we're trying to set, but got changed at some point into the range
* without the kernel knowing about it, its rate shouldn't be affected.
*/
static void clk_test_uncached_updated_rate_set_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
/* We change the rate behind the clock framework's back */
ctx->rate = DUMMY_CLOCK_RATE_1 + 1000;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
clk_put(clk);
}
static struct kunit_case clk_uncached_test_cases[] = {
KUNIT_CASE(clk_test_uncached_get_rate),
KUNIT_CASE(clk_test_uncached_set_range),
KUNIT_CASE(clk_test_uncached_updated_rate_set_range),
{}
};
/*
* Test suite for a basic, uncached, rate clock, without any parent.
*
* These tests exercise the rate API with simple scenarios
*/
static struct kunit_suite clk_uncached_test_suite = {
.name = "clk-uncached-test",
.init = clk_uncached_test_init,
.exit = clk_test_exit,
.test_cases = clk_uncached_test_cases,
};
static int
clk_multiple_parents_mux_test_init(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx;
const char *parents[2] = { "parent-0", "parent-1"};
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register_kunit(test, NULL, &ctx->parents_ctx[0].hw);
if (ret)
return ret;
ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register_kunit(test, NULL, &ctx->parents_ctx[1].hw);
if (ret)
return ret;
ctx->current_parent = 0;
ctx->hw.init = CLK_HW_INIT_PARENTS("test-mux", parents,
&clk_multiple_parents_mux_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register_kunit(test, NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
/*
* Test that for a clock with multiple parents, clk_get_parent()
* actually returns the current one.
*/
static void
clk_test_multiple_parents_mux_get_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_is_match(clk_get_parent(clk), parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock with a multiple parents, clk_has_parent()
* actually reports all of them as parents.
*/
static void
clk_test_multiple_parents_mux_has_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
parent = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent));
clk_put(parent);
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock with a multiple parents, if we set a range on
* that clock and the parent is changed, its rate after the reparenting
* is still within the range we asked for.
*
* FIXME: clk_set_parent() only does the reparenting but doesn't
* reevaluate whether the new clock rate is within its boundaries or
* not.
*/
static void
clk_test_multiple_parents_mux_set_range_set_parent_get_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk_kunit(test, hw, NULL);
struct clk *parent1, *parent2;
unsigned long rate;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
parent1 = clk_hw_get_clk_kunit(test, &ctx->parents_ctx[0].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent1);
KUNIT_ASSERT_TRUE(test, clk_is_match(clk_get_parent(clk), parent1));
parent2 = clk_hw_get_clk_kunit(test, &ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent2);
ret = clk_set_rate(parent1, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate(parent2, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1 - 1000,
DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_parent(clk, parent2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
}
static struct kunit_case clk_multiple_parents_mux_test_cases[] = {
KUNIT_CASE(clk_test_multiple_parents_mux_get_parent),
KUNIT_CASE(clk_test_multiple_parents_mux_has_parent),
KUNIT_CASE(clk_test_multiple_parents_mux_set_range_set_parent_get_rate),
{}
};
/*
* Test suite for a basic mux clock with two parents, with
* CLK_SET_RATE_PARENT on the child.
*
* These tests exercise the consumer API and check that the state of the
* child and parents are sane and consistent.
*/
static struct kunit_suite
clk_multiple_parents_mux_test_suite = {
.name = "clk-multiple-parents-mux-test",
.init = clk_multiple_parents_mux_test_init,
.test_cases = clk_multiple_parents_mux_test_cases,
};
static int
clk_orphan_transparent_multiple_parent_mux_test_init(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx;
const char *parents[2] = { "missing-parent", "proper-parent"};
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("proper-parent",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[1].rate = DUMMY_CLOCK_INIT_RATE;
ret = clk_hw_register_kunit(test, NULL, &ctx->parents_ctx[1].hw);
if (ret)
return ret;
ctx->hw.init = CLK_HW_INIT_PARENTS("test-orphan-mux", parents,
&clk_multiple_parents_mux_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register_kunit(test, NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
/*
* Test that, for a mux whose current parent hasn't been registered yet and is
* thus orphan, clk_get_parent() will return NULL.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_get_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
KUNIT_EXPECT_PTR_EQ(test, clk_get_parent(clk), NULL);
clk_put(clk);
}
/*
* Test that, for a mux whose current parent hasn't been registered yet,
* calling clk_set_parent() to a valid parent will properly update the
* mux parent and its orphan status.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent, *new_parent;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
new_parent = clk_get_parent(clk);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
KUNIT_EXPECT_TRUE(test, clk_is_match(parent, new_parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_drop_range() on the mux won't affect the parent
* rate.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long parent_rate, new_parent_rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_drop_range(clk);
KUNIT_ASSERT_EQ(test, ret, 0);
new_parent_rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, new_parent_rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, the rate of the mux and its new parent are consistent.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long parent_rate, rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, rate);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_put() on the mux won't affect the parent rate.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_put(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk *clk, *parent;
unsigned long parent_rate, new_parent_rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
clk = clk_hw_get_clk(&ctx->hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, clk);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
clk_put(clk);
new_parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, new_parent_rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
clk_put(parent);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_set_rate_range() will affect the parent state if
* its rate is out of range.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_set_rate_range() won't affect the parent state if
* its rate is within range.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long parent_rate, new_parent_rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk,
DUMMY_CLOCK_INIT_RATE - 1000,
DUMMY_CLOCK_INIT_RATE + 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
new_parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, new_parent_rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux whose current parent hasn't been registered yet,
* calling clk_set_rate_range() will succeed, and will be taken into
* account when rounding a rate.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rate;
int ret;
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan, was assigned and rate and
* then got switched to a valid parent, its rate is eventually within
* range.
*
* FIXME: Even though we update the rate as part of clk_set_parent(), we
* don't evaluate whether that new rate is within range and needs to be
* adjusted.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk_kunit(test, hw, NULL);
struct clk *parent;
unsigned long rate;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
clk_hw_set_rate_range(hw, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
parent = clk_hw_get_clk_kunit(test, &ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
}
static struct kunit_case clk_orphan_transparent_multiple_parent_mux_test_cases[] = {
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_get_parent),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_put),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate),
{}
};
/*
* Test suite for a basic mux clock with two parents. The default parent
* isn't registered, only the second parent is. By default, the clock
* will thus be orphan.
*
* These tests exercise the behaviour of the consumer API when dealing
* with an orphan clock, and how we deal with the transition to a valid
* parent.
*/
static struct kunit_suite clk_orphan_transparent_multiple_parent_mux_test_suite = {
.name = "clk-orphan-transparent-multiple-parent-mux-test",
.init = clk_orphan_transparent_multiple_parent_mux_test_init,
.test_cases = clk_orphan_transparent_multiple_parent_mux_test_cases,
};
struct clk_single_parent_ctx {
struct clk_dummy_context parent_ctx;
struct clk_hw hw;
};
static int clk_single_parent_mux_test_init(struct kunit *test)
{
struct clk_single_parent_ctx *ctx;
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
ctx->parent_ctx.hw.init =
CLK_HW_INIT_NO_PARENT("parent-clk",
&clk_dummy_rate_ops,
0);
ret = clk_hw_register_kunit(test, NULL, &ctx->parent_ctx.hw);
if (ret)
return ret;
ctx->hw.init = CLK_HW_INIT("test-clk", "parent-clk",
&clk_dummy_single_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register_kunit(test, NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void
clk_single_parent_mux_test_exit(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parent_ctx.hw);
}
/*
* Test that for a clock with a single parent, clk_get_parent() actually
* returns the parent.
*/
static void
clk_test_single_parent_mux_get_parent(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent = clk_hw_get_clk(&ctx->parent_ctx.hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_is_match(clk_get_parent(clk), parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock with a single parent, clk_has_parent() actually
* reports it as a parent.
*/
static void
clk_test_single_parent_mux_has_parent(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent = clk_hw_get_clk(&ctx->parent_ctx.hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set disjoints range on the parent and then the child,
* the second will return an error.
*
* FIXME: clk_set_rate_range() only considers the current clock when
* evaluating whether ranges are disjoints and not the upstream clocks
* ranges.
*/
static void
clk_test_single_parent_mux_set_range_disjoint_child_last(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk_kunit(test, hw, NULL);
struct clk *parent;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, 1000, 2000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, 3000, 4000);
KUNIT_EXPECT_LT(test, ret, 0);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set disjoints range on the child and then the parent,
* the second will return an error.
*
* FIXME: clk_set_rate_range() only considers the current clock when
* evaluating whether ranges are disjoints and not the downstream clocks
* ranges.
*/
static void
clk_test_single_parent_mux_set_range_disjoint_parent_last(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk_kunit(test, hw, NULL);
struct clk *parent;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(clk, 1000, 2000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(parent, 3000, 4000);
KUNIT_EXPECT_LT(test, ret, 0);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set a range on the parent and then call
* clk_round_rate(), the boundaries of the parent are taken into
* account.
*/
static void
clk_test_single_parent_mux_set_range_round_rate_parent_only(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set a range on the parent and a more restrictive one on
* the child, and then call clk_round_rate(), the boundaries of the
* two clocks are taken into account.
*/
static void
clk_test_single_parent_mux_set_range_round_rate_child_smaller(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set a range on the child and a more restrictive one on
* the parent, and then call clk_round_rate(), the boundaries of the
* two clocks are taken into account.
*/
static void
clk_test_single_parent_mux_set_range_round_rate_parent_smaller(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
clk_put(clk);
}
static struct kunit_case clk_single_parent_mux_test_cases[] = {
KUNIT_CASE(clk_test_single_parent_mux_get_parent),
KUNIT_CASE(clk_test_single_parent_mux_has_parent),
KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last),
KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last),
KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_child_smaller),
KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_only),
KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_smaller),
{}
};
/*
* Test suite for a basic mux clock with one parent, with
* CLK_SET_RATE_PARENT on the child.
*
* These tests exercise the consumer API and check that the state of the
* child and parent are sane and consistent.
*/
static struct kunit_suite
clk_single_parent_mux_test_suite = {
.name = "clk-single-parent-mux-test",
.init = clk_single_parent_mux_test_init,
.test_cases = clk_single_parent_mux_test_cases,
};
static int clk_orphan_transparent_single_parent_mux_test_init(struct kunit *test)
{
struct clk_single_parent_ctx *ctx;
struct clk_init_data init = { };
const char * const parents[] = { "orphan_parent" };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
init.name = "test_orphan_dummy_parent";
init.ops = &clk_dummy_single_parent_ops;
init.parent_names = parents;
init.num_parents = ARRAY_SIZE(parents);
init.flags = CLK_SET_RATE_PARENT;
ctx->hw.init = &init;
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
memset(&init, 0, sizeof(init));
init.name = "orphan_parent";
init.ops = &clk_dummy_rate_ops;
ctx->parent_ctx.hw.init = &init;
ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
if (ret)
return ret;
return 0;
}
/*
* Test that a mux-only clock, with an initial rate within a range,
* will still have the same rate after the range has been enforced.
*
* See:
* https://lore.kernel.org/linux-clk/7720158d-10a7-a17b-73a4-a8615c9c6d5c@collabora.com/
*/
static void clk_test_orphan_transparent_parent_mux_set_range(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate, new_rate;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
ctx->parent_ctx.rate - 1000,
ctx->parent_ctx.rate + 1000),
0);
new_rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, new_rate, 0);
KUNIT_EXPECT_EQ(test, rate, new_rate);
clk_put(clk);
}
static struct kunit_case clk_orphan_transparent_single_parent_mux_test_cases[] = {
KUNIT_CASE(clk_test_orphan_transparent_parent_mux_set_range),
{}
};
/*
* Test suite for a basic mux clock with one parent. The parent is
* registered after its child. The clock will thus be an orphan when
* registered, but will no longer be when the tests run.
*
* These tests make sure a clock that used to be orphan has a sane,
* consistent, behaviour.
*/
static struct kunit_suite clk_orphan_transparent_single_parent_test_suite = {
.name = "clk-orphan-transparent-single-parent-test",
.init = clk_orphan_transparent_single_parent_mux_test_init,
.exit = clk_single_parent_mux_test_exit,
.test_cases = clk_orphan_transparent_single_parent_mux_test_cases,
};
struct clk_single_parent_two_lvl_ctx {
struct clk_dummy_context parent_parent_ctx;
struct clk_dummy_context parent_ctx;
struct clk_hw hw;
};
static int
clk_orphan_two_level_root_last_test_init(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx;
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parent_ctx.hw.init =
CLK_HW_INIT("intermediate-parent",
"root-parent",
&clk_dummy_single_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
if (ret)
return ret;
ctx->hw.init =
CLK_HW_INIT("test-clk", "intermediate-parent",
&clk_dummy_single_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
ctx->parent_parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
ctx->parent_parent_ctx.hw.init =
CLK_HW_INIT_NO_PARENT("root-parent",
&clk_dummy_rate_ops,
0);
ret = clk_hw_register(NULL, &ctx->parent_parent_ctx.hw);
if (ret)
return ret;
return 0;
}
static void
clk_orphan_two_level_root_last_test_exit(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parent_ctx.hw);
clk_hw_unregister(&ctx->parent_parent_ctx.hw);
}
/*
* Test that, for a clock whose parent used to be orphan, clk_get_rate()
* will return the proper rate.
*/
static void
clk_orphan_two_level_root_last_test_get_rate(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
rate = clk_get_rate(clk);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
clk_put(clk);
}
/*
* Test that, for a clock whose parent used to be orphan,
* clk_set_rate_range() won't affect its rate if it is already within
* range.
*
* See (for Exynos 4210):
* https://lore.kernel.org/linux-clk/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com/
*/
static void
clk_orphan_two_level_root_last_test_set_range(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
int ret;
ret = clk_set_rate_range(clk,
DUMMY_CLOCK_INIT_RATE - 1000,
DUMMY_CLOCK_INIT_RATE + 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
clk_put(clk);
}
static struct kunit_case
clk_orphan_two_level_root_last_test_cases[] = {
KUNIT_CASE(clk_orphan_two_level_root_last_test_get_rate),
KUNIT_CASE(clk_orphan_two_level_root_last_test_set_range),
{}
};
/*
* Test suite for a basic, transparent, clock with a parent that is also
* such a clock. The parent's parent is registered last, while the
* parent and its child are registered in that order. The intermediate
* and leaf clocks will thus be orphan when registered, but the leaf
* clock itself will always have its parent and will never be
* reparented. Indeed, it's only orphan because its parent is.
*
* These tests exercise the behaviour of the consumer API when dealing
* with an orphan clock, and how we deal with the transition to a valid
* parent.
*/
static struct kunit_suite
clk_orphan_two_level_root_last_test_suite = {
.name = "clk-orphan-two-level-root-last-test",
.init = clk_orphan_two_level_root_last_test_init,
.exit = clk_orphan_two_level_root_last_test_exit,
.test_cases = clk_orphan_two_level_root_last_test_cases,
};
/*
* Test that clk_set_rate_range won't return an error for a valid range
* and that it will make sure the rate of the clock is within the
* boundaries.
*/
static void clk_range_test_set_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that calling clk_set_rate_range with a minimum rate higher than
* the maximum rate returns an error.
*/
static void clk_range_test_set_range_invalid(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
KUNIT_EXPECT_LT(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1 + 1000,
DUMMY_CLOCK_RATE_1),
0);
clk_put(clk);
}
/*
* Test that users can't set multiple, disjoints, range that would be
* impossible to meet.
*/
static void clk_range_test_multiple_disjoints_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *user1, *user2;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1, 1000, 2000),
0);
KUNIT_EXPECT_LT(test,
clk_set_rate_range(user2, 3000, 4000),
0);
clk_put(user2);
clk_put(user1);
}
/*
* Test that if our clock has some boundaries and we try to round a rate
* lower than the minimum, the returned rate will be within range.
*/
static void clk_range_test_set_range_round_rate_lower(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to set a rate
* higher than the maximum, the new rate will be within range.
*/
static void clk_range_test_set_range_set_rate_lower(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to round and
* set a rate lower than the minimum, the rate returned by
* clk_round_rate() will be consistent with the new rate set by
* clk_set_rate().
*/
static void clk_range_test_set_range_set_round_rate_consistent_lower(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rounded;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rounded, 0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
KUNIT_EXPECT_EQ(test, rounded, clk_get_rate(clk));
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to round a rate
* higher than the maximum, the returned rate will be within range.
*/
static void clk_range_test_set_range_round_rate_higher(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to set a rate
* higher than the maximum, the new rate will be within range.
*/
static void clk_range_test_set_range_set_rate_higher(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to round and
* set a rate higher than the maximum, the rate returned by
* clk_round_rate() will be consistent with the new rate set by
* clk_set_rate().
*/
static void clk_range_test_set_range_set_round_rate_consistent_higher(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rounded;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rounded, 0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_EXPECT_EQ(test, rounded, clk_get_rate(clk));
clk_put(clk);
}
/*
* Test that if our clock has a rate lower than the minimum set by a
* call to clk_set_rate_range(), the rate will be raised to match the
* new minimum.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_range_test_set_range_get_rate_raised(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that if our clock has a rate higher than the maximum set by a
* call to clk_set_rate_range(), the rate will be lowered to match the
* new maximum.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_range_test_set_range_get_rate_lowered(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
static struct kunit_case clk_range_test_cases[] = {
KUNIT_CASE(clk_range_test_set_range),
KUNIT_CASE(clk_range_test_set_range_invalid),
KUNIT_CASE(clk_range_test_multiple_disjoints_range),
KUNIT_CASE(clk_range_test_set_range_round_rate_lower),
KUNIT_CASE(clk_range_test_set_range_set_rate_lower),
KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_lower),
KUNIT_CASE(clk_range_test_set_range_round_rate_higher),
KUNIT_CASE(clk_range_test_set_range_set_rate_higher),
KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_higher),
KUNIT_CASE(clk_range_test_set_range_get_rate_raised),
KUNIT_CASE(clk_range_test_set_range_get_rate_lowered),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate range API: clk_set_rate_range(),
* clk_set_min_rate(), clk_set_max_rate(), clk_drop_range().
*/
static struct kunit_suite clk_range_test_suite = {
.name = "clk-range-test",
.init = clk_test_init,
.exit = clk_test_exit,
.test_cases = clk_range_test_cases,
};
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), the core will reevaluate whether a new rate is
* needed each and every time.
*
* With clk_dummy_maximize_rate_ops, this means that the rate will
* trail along the maximum as it evolves.
*/
static void clk_range_test_set_range_rate_maximized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2 - 1000),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed each and every time.
*
* With clk_dummy_maximize_rate_ops, this means that the rate will
* trail along the maximum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_maximized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
0,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
0,
DUMMY_CLOCK_RATE_1),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_drop_range(user2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(user2);
clk_put(user1);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed, including when a user drop its clock.
*
* With clk_dummy_maximize_rate_ops, this means that the rate will
* trail along the maximum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_put_maximized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
0,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
0,
DUMMY_CLOCK_RATE_1),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(user2);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(user1);
clk_put(clk);
}
static struct kunit_case clk_range_maximize_test_cases[] = {
KUNIT_CASE(clk_range_test_set_range_rate_maximized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_maximized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_maximized),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate range API: clk_set_rate_range(),
* clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a
* driver that will always try to run at the highest possible rate.
*/
static struct kunit_suite clk_range_maximize_test_suite = {
.name = "clk-range-maximize-test",
.init = clk_maximize_test_init,
.exit = clk_test_exit,
.test_cases = clk_range_maximize_test_cases,
};
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), the core will reevaluate whether a new rate is
* needed each and every time.
*
* With clk_dummy_minimize_rate_ops, this means that the rate will
* trail along the minimum as it evolves.
*/
static void clk_range_test_set_range_rate_minimized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1 + 1000,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed each and every time.
*
* With clk_dummy_minimize_rate_ops, this means that the rate will
* trail along the minimum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_minimized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
DUMMY_CLOCK_RATE_1,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
DUMMY_CLOCK_RATE_2,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_drop_range(user2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(user2);
clk_put(user1);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed, including when a user drop its clock.
*
* With clk_dummy_minimize_rate_ops, this means that the rate will
* trail along the minimum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_put_minimized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
DUMMY_CLOCK_RATE_1,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
DUMMY_CLOCK_RATE_2,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(user2);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(user1);
clk_put(clk);
}
static struct kunit_case clk_range_minimize_test_cases[] = {
KUNIT_CASE(clk_range_test_set_range_rate_minimized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_minimized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_minimized),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate range API: clk_set_rate_range(),
* clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a
* driver that will always try to run at the lowest possible rate.
*/
static struct kunit_suite clk_range_minimize_test_suite = {
.name = "clk-range-minimize-test",
.init = clk_minimize_test_init,
.exit = clk_test_exit,
.test_cases = clk_range_minimize_test_cases,
};
struct clk_leaf_mux_ctx {
struct clk_multiple_parent_ctx mux_ctx;
struct clk_hw hw;
struct clk_hw parent;
struct clk_rate_request *req;
int (*determine_rate_func)(struct clk_hw *hw, struct clk_rate_request *req);
};
static int clk_leaf_mux_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
{
struct clk_leaf_mux_ctx *ctx = container_of(hw, struct clk_leaf_mux_ctx, hw);
int ret;
struct clk_rate_request *parent_req = ctx->req;
clk_hw_forward_rate_request(hw, req, req->best_parent_hw, parent_req, req->rate);
ret = ctx->determine_rate_func(req->best_parent_hw, parent_req);
if (ret)
return ret;
req->rate = parent_req->rate;
return 0;
}
static const struct clk_ops clk_leaf_mux_set_rate_parent_ops = {
.determine_rate = clk_leaf_mux_determine_rate,
.set_parent = clk_dummy_single_set_parent,
.get_parent = clk_dummy_single_get_parent,
};
static int
clk_leaf_mux_set_rate_parent_test_init(struct kunit *test)
{
struct clk_leaf_mux_ctx *ctx;
const char *top_parents[2] = { "parent-0", "parent-1" };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->mux_ctx.parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[0].hw);
if (ret)
return ret;
ctx->mux_ctx.parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[1].hw);
if (ret)
return ret;
ctx->mux_ctx.current_parent = 0;
ctx->mux_ctx.hw.init = CLK_HW_INIT_PARENTS("test-mux", top_parents,
&clk_multiple_parents_mux_ops,
0);
ret = clk_hw_register(NULL, &ctx->mux_ctx.hw);
if (ret)
return ret;
ctx->parent.init = CLK_HW_INIT_HW("test-parent", &ctx->mux_ctx.hw,
&empty_clk_ops, CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->parent);
if (ret)
return ret;
ctx->hw.init = CLK_HW_INIT_HW("test-clock", &ctx->parent,
&clk_leaf_mux_set_rate_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void clk_leaf_mux_set_rate_parent_test_exit(struct kunit *test)
{
struct clk_leaf_mux_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parent);
clk_hw_unregister(&ctx->mux_ctx.hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[0].hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[1].hw);
}
struct clk_leaf_mux_set_rate_parent_determine_rate_test_case {
const char *desc;
int (*determine_rate_func)(struct clk_hw *hw, struct clk_rate_request *req);
};
static void
clk_leaf_mux_set_rate_parent_determine_rate_test_case_to_desc(
const struct clk_leaf_mux_set_rate_parent_determine_rate_test_case *t, char *desc)
{
strcpy(desc, t->desc);
}
static const struct clk_leaf_mux_set_rate_parent_determine_rate_test_case
clk_leaf_mux_set_rate_parent_determine_rate_test_cases[] = {
{
/*
* Test that __clk_determine_rate() on the parent that can't
* change rate doesn't return a clk_rate_request structure with
* the best_parent_hw pointer pointing to the parent.
*/
.desc = "clk_leaf_mux_set_rate_parent__clk_determine_rate_proper_parent",
.determine_rate_func = __clk_determine_rate,
},
{
/*
* Test that __clk_mux_determine_rate() on the parent that
* can't change rate doesn't return a clk_rate_request
* structure with the best_parent_hw pointer pointing to
* the parent.
*/
.desc = "clk_leaf_mux_set_rate_parent__clk_mux_determine_rate_proper_parent",
.determine_rate_func = __clk_mux_determine_rate,
},
{
/*
* Test that __clk_mux_determine_rate_closest() on the parent
* that can't change rate doesn't return a clk_rate_request
* structure with the best_parent_hw pointer pointing to
* the parent.
*/
.desc = "clk_leaf_mux_set_rate_parent__clk_mux_determine_rate_closest_proper_parent",
.determine_rate_func = __clk_mux_determine_rate_closest,
},
{
/*
* Test that clk_hw_determine_rate_no_reparent() on the parent
* that can't change rate doesn't return a clk_rate_request
* structure with the best_parent_hw pointer pointing to
* the parent.
*/
.desc = "clk_leaf_mux_set_rate_parent_clk_hw_determine_rate_no_reparent_proper_parent",
.determine_rate_func = clk_hw_determine_rate_no_reparent,
},
};
KUNIT_ARRAY_PARAM(clk_leaf_mux_set_rate_parent_determine_rate_test,
clk_leaf_mux_set_rate_parent_determine_rate_test_cases,
clk_leaf_mux_set_rate_parent_determine_rate_test_case_to_desc)
/*
* Test that when a clk that can't change rate itself calls a function like
* __clk_determine_rate() on its parent it doesn't get back a clk_rate_request
* structure that has the best_parent_hw pointer point to the clk_hw passed
* into the determine rate function. See commit 262ca38f4b6e ("clk: Stop
* forwarding clk_rate_requests to the parent") for more background.
*/
static void clk_leaf_mux_set_rate_parent_determine_rate_test(struct kunit *test)
{
struct clk_leaf_mux_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk_rate_request req;
unsigned long rate;
const struct clk_leaf_mux_set_rate_parent_determine_rate_test_case *test_param;
test_param = test->param_value;
ctx->determine_rate_func = test_param->determine_rate_func;
ctx->req = &req;
rate = clk_get_rate(clk);
KUNIT_ASSERT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test, DUMMY_CLOCK_RATE_2, clk_round_rate(clk, DUMMY_CLOCK_RATE_2));
KUNIT_EXPECT_EQ(test, req.rate, DUMMY_CLOCK_RATE_2);
KUNIT_EXPECT_EQ(test, req.best_parent_rate, DUMMY_CLOCK_RATE_2);
KUNIT_EXPECT_PTR_EQ(test, req.best_parent_hw, &ctx->mux_ctx.hw);
clk_put(clk);
}
static struct kunit_case clk_leaf_mux_set_rate_parent_test_cases[] = {
KUNIT_CASE_PARAM(clk_leaf_mux_set_rate_parent_determine_rate_test,
clk_leaf_mux_set_rate_parent_determine_rate_test_gen_params),
{}
};
/*
* Test suite for a clock whose parent is a pass-through clk whose parent is a
* mux with multiple parents. The leaf and pass-through clocks have the
* CLK_SET_RATE_PARENT flag, and will forward rate requests to the mux, which
* will then select which parent is the best fit for a given rate.
*
* These tests exercise the behaviour of muxes, and the proper selection
* of parents.
*/
static struct kunit_suite clk_leaf_mux_set_rate_parent_test_suite = {
.name = "clk-leaf-mux-set-rate-parent",
.init = clk_leaf_mux_set_rate_parent_test_init,
.exit = clk_leaf_mux_set_rate_parent_test_exit,
.test_cases = clk_leaf_mux_set_rate_parent_test_cases,
};
struct clk_mux_notifier_rate_change {
bool done;
unsigned long old_rate;
unsigned long new_rate;
wait_queue_head_t wq;
};
struct clk_mux_notifier_ctx {
struct clk_multiple_parent_ctx mux_ctx;
struct clk *clk;
struct notifier_block clk_nb;
struct clk_mux_notifier_rate_change pre_rate_change;
struct clk_mux_notifier_rate_change post_rate_change;
};
#define NOTIFIER_TIMEOUT_MS 100
static int clk_mux_notifier_callback(struct notifier_block *nb,
unsigned long action, void *data)
{
struct clk_notifier_data *clk_data = data;
struct clk_mux_notifier_ctx *ctx = container_of(nb,
struct clk_mux_notifier_ctx,
clk_nb);
if (action & PRE_RATE_CHANGE) {
ctx->pre_rate_change.old_rate = clk_data->old_rate;
ctx->pre_rate_change.new_rate = clk_data->new_rate;
ctx->pre_rate_change.done = true;
wake_up_interruptible(&ctx->pre_rate_change.wq);
}
if (action & POST_RATE_CHANGE) {
ctx->post_rate_change.old_rate = clk_data->old_rate;
ctx->post_rate_change.new_rate = clk_data->new_rate;
ctx->post_rate_change.done = true;
wake_up_interruptible(&ctx->post_rate_change.wq);
}
return 0;
}
static int clk_mux_notifier_test_init(struct kunit *test)
{
struct clk_mux_notifier_ctx *ctx;
const char *top_parents[2] = { "parent-0", "parent-1" };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->clk_nb.notifier_call = clk_mux_notifier_callback;
init_waitqueue_head(&ctx->pre_rate_change.wq);
init_waitqueue_head(&ctx->post_rate_change.wq);
ctx->mux_ctx.parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[0].hw);
if (ret)
return ret;
ctx->mux_ctx.parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[1].hw);
if (ret)
return ret;
ctx->mux_ctx.current_parent = 0;
ctx->mux_ctx.hw.init = CLK_HW_INIT_PARENTS("test-mux", top_parents,
&clk_multiple_parents_mux_ops,
0);
ret = clk_hw_register(NULL, &ctx->mux_ctx.hw);
if (ret)
return ret;
ctx->clk = clk_hw_get_clk(&ctx->mux_ctx.hw, NULL);
ret = clk_notifier_register(ctx->clk, &ctx->clk_nb);
if (ret)
return ret;
return 0;
}
static void clk_mux_notifier_test_exit(struct kunit *test)
{
struct clk_mux_notifier_ctx *ctx = test->priv;
struct clk *clk = ctx->clk;
clk_notifier_unregister(clk, &ctx->clk_nb);
clk_put(clk);
clk_hw_unregister(&ctx->mux_ctx.hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[0].hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[1].hw);
}
/*
* Test that if the we have a notifier registered on a mux, the core
* will notify us when we switch to another parent, and with the proper
* old and new rates.
*/
static void clk_mux_notifier_set_parent_test(struct kunit *test)
{
struct clk_mux_notifier_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->mux_ctx.hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *new_parent = clk_hw_get_clk(&ctx->mux_ctx.parents_ctx[1].hw, NULL);
int ret;
ret = clk_set_parent(clk, new_parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = wait_event_interruptible_timeout(ctx->pre_rate_change.wq,
ctx->pre_rate_change.done,
msecs_to_jiffies(NOTIFIER_TIMEOUT_MS));
KUNIT_ASSERT_GT(test, ret, 0);
KUNIT_EXPECT_EQ(test, ctx->pre_rate_change.old_rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_EQ(test, ctx->pre_rate_change.new_rate, DUMMY_CLOCK_RATE_2);
ret = wait_event_interruptible_timeout(ctx->post_rate_change.wq,
ctx->post_rate_change.done,
msecs_to_jiffies(NOTIFIER_TIMEOUT_MS));
KUNIT_ASSERT_GT(test, ret, 0);
KUNIT_EXPECT_EQ(test, ctx->post_rate_change.old_rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_EQ(test, ctx->post_rate_change.new_rate, DUMMY_CLOCK_RATE_2);
clk_put(new_parent);
clk_put(clk);
}
static struct kunit_case clk_mux_notifier_test_cases[] = {
KUNIT_CASE(clk_mux_notifier_set_parent_test),
{}
};
/*
* Test suite for a mux with multiple parents, and a notifier registered
* on the mux.
*
* These tests exercise the behaviour of notifiers.
*/
static struct kunit_suite clk_mux_notifier_test_suite = {
.name = "clk-mux-notifier",
.init = clk_mux_notifier_test_init,
.exit = clk_mux_notifier_test_exit,
.test_cases = clk_mux_notifier_test_cases,
};
static int
clk_mux_no_reparent_test_init(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx;
const char *parents[2] = { "parent-0", "parent-1"};
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register(NULL, &ctx->parents_ctx[0].hw);
if (ret)
return ret;
ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw);
if (ret)
return ret;
ctx->current_parent = 0;
ctx->hw.init = CLK_HW_INIT_PARENTS("test-mux", parents,
&clk_multiple_parents_no_reparent_mux_ops,
0);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void
clk_mux_no_reparent_test_exit(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parents_ctx[0].hw);
clk_hw_unregister(&ctx->parents_ctx[1].hw);
}
/*
* Test that if the we have a mux that cannot change parent and we call
* clk_round_rate() on it with a rate that should cause it to change
* parent, it won't.
*/
static void clk_mux_no_reparent_round_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *other_parent, *parent;
unsigned long other_parent_rate;
unsigned long parent_rate;
long rounded_rate;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
other_parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, other_parent);
KUNIT_ASSERT_FALSE(test, clk_is_match(parent, other_parent));
other_parent_rate = clk_get_rate(other_parent);
KUNIT_ASSERT_GT(test, other_parent_rate, 0);
clk_put(other_parent);
rounded_rate = clk_round_rate(clk, other_parent_rate);
KUNIT_ASSERT_GT(test, rounded_rate, 0);
KUNIT_EXPECT_EQ(test, rounded_rate, parent_rate);
clk_put(clk);
}
/*
* Test that if the we have a mux that cannot change parent and we call
* clk_set_rate() on it with a rate that should cause it to change
* parent, it won't.
*/
static void clk_mux_no_reparent_set_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *other_parent, *parent;
unsigned long other_parent_rate;
unsigned long parent_rate;
unsigned long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
other_parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, other_parent);
KUNIT_ASSERT_FALSE(test, clk_is_match(parent, other_parent));
other_parent_rate = clk_get_rate(other_parent);
KUNIT_ASSERT_GT(test, other_parent_rate, 0);
clk_put(other_parent);
ret = clk_set_rate(clk, other_parent_rate);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, parent_rate);
clk_put(clk);
}
static struct kunit_case clk_mux_no_reparent_test_cases[] = {
KUNIT_CASE(clk_mux_no_reparent_round_rate),
KUNIT_CASE(clk_mux_no_reparent_set_rate),
{}
};
/*
* Test suite for a clock mux that isn't allowed to change parent, using
* the clk_hw_determine_rate_no_reparent() helper.
*
* These tests exercise that helper, and the proper selection of
* rates and parents.
*/
static struct kunit_suite clk_mux_no_reparent_test_suite = {
.name = "clk-mux-no-reparent",
.init = clk_mux_no_reparent_test_init,
.exit = clk_mux_no_reparent_test_exit,
.test_cases = clk_mux_no_reparent_test_cases,
};
struct clk_register_clk_parent_data_test_case {
const char *desc;
struct clk_parent_data pdata;
};
static void
clk_register_clk_parent_data_test_case_to_desc(
const struct clk_register_clk_parent_data_test_case *t, char *desc)
{
strcpy(desc, t->desc);
}
static const struct clk_register_clk_parent_data_test_case
clk_register_clk_parent_data_of_cases[] = {
{
/*
* Test that a clk registered with a struct device_node can
* find a parent based on struct clk_parent_data::index.
*/
.desc = "clk_parent_data_of_index_test",
.pdata.index = 0,
},
{
/*
* Test that a clk registered with a struct device_node can
* find a parent based on struct clk_parent_data::fwname.
*/
.desc = "clk_parent_data_of_fwname_test",
.pdata.fw_name = CLK_PARENT_DATA_PARENT1,
},
{
/*
* Test that a clk registered with a struct device_node can
* find a parent based on struct clk_parent_data::name.
*/
.desc = "clk_parent_data_of_name_test",
/* The index must be negative to indicate firmware not used */
.pdata.index = -1,
.pdata.name = CLK_PARENT_DATA_1MHZ_NAME,
},
{
/*
* Test that a clk registered with a struct device_node can
* find a parent based on struct
* clk_parent_data::{fw_name,name}.
*/
.desc = "clk_parent_data_of_fwname_name_test",
.pdata.fw_name = CLK_PARENT_DATA_PARENT1,
.pdata.name = "not_matching",
},
{
/*
* Test that a clk registered with a struct device_node can
* find a parent based on struct clk_parent_data::{index,name}.
* Index takes priority.
*/
.desc = "clk_parent_data_of_index_name_priority_test",
.pdata.index = 0,
.pdata.name = "not_matching",
},
{
/*
* Test that a clk registered with a struct device_node can
* find a parent based on struct
* clk_parent_data::{index,fwname,name}. The fw_name takes
* priority over index and name.
*/
.desc = "clk_parent_data_of_index_fwname_name_priority_test",
.pdata.index = 1,
.pdata.fw_name = CLK_PARENT_DATA_PARENT1,
.pdata.name = "not_matching",
},
};
KUNIT_ARRAY_PARAM(clk_register_clk_parent_data_of_test, clk_register_clk_parent_data_of_cases,
clk_register_clk_parent_data_test_case_to_desc)
/**
* struct clk_register_clk_parent_data_of_ctx - Context for clk_parent_data OF tests
* @np: device node of clk under test
* @hw: clk_hw for clk under test
*/
struct clk_register_clk_parent_data_of_ctx {
struct device_node *np;
struct clk_hw hw;
};
static int clk_register_clk_parent_data_of_test_init(struct kunit *test)
{
struct clk_register_clk_parent_data_of_ctx *ctx;
KUNIT_ASSERT_EQ(test, 0,
of_overlay_apply_kunit(test, kunit_clk_parent_data_test));
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->np = of_find_compatible_node(NULL, NULL, "test,clk-parent-data");
if (!ctx->np)
return -ENODEV;
of_node_put_kunit(test, ctx->np);
return 0;
}
/*
* Test that a clk registered with a struct device_node can find a parent based on
* struct clk_parent_data when the hw member isn't set.
*/
static void clk_register_clk_parent_data_of_test(struct kunit *test)
{
struct clk_register_clk_parent_data_of_ctx *ctx = test->priv;
struct clk_hw *parent_hw;
const struct clk_register_clk_parent_data_test_case *test_param;
struct clk_init_data init = { };
struct clk *expected_parent, *actual_parent;
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->np);
expected_parent = of_clk_get_kunit(test, ctx->np, 0);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, expected_parent);
test_param = test->param_value;
init.parent_data = &test_param->pdata;
init.num_parents = 1;
init.name = "parent_data_of_test_clk";
init.ops = &clk_dummy_single_parent_ops;
ctx->hw.init = &init;
KUNIT_ASSERT_EQ(test, 0, of_clk_hw_register_kunit(test, ctx->np, &ctx->hw));
parent_hw = clk_hw_get_parent(&ctx->hw);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent_hw);
actual_parent = clk_hw_get_clk_kunit(test, parent_hw, __func__);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, actual_parent);
KUNIT_EXPECT_TRUE(test, clk_is_match(expected_parent, actual_parent));
}
static struct kunit_case clk_register_clk_parent_data_of_test_cases[] = {
KUNIT_CASE_PARAM(clk_register_clk_parent_data_of_test,
clk_register_clk_parent_data_of_test_gen_params),
{}
};
/*
* Test suite for registering clks with struct clk_parent_data and a struct
* device_node.
*/
static struct kunit_suite clk_register_clk_parent_data_of_suite = {
.name = "clk_register_clk_parent_data_of",
.init = clk_register_clk_parent_data_of_test_init,
.test_cases = clk_register_clk_parent_data_of_test_cases,
};
/**
* struct clk_register_clk_parent_data_device_ctx - Context for clk_parent_data device tests
* @dev: device of clk under test
* @hw: clk_hw for clk under test
* @pdrv: driver to attach to find @dev
*/
struct clk_register_clk_parent_data_device_ctx {
struct device *dev;
struct clk_hw hw;
struct platform_driver pdrv;
};
static inline struct clk_register_clk_parent_data_device_ctx *
clk_register_clk_parent_data_driver_to_test_context(struct platform_device *pdev)
{
return container_of(to_platform_driver(pdev->dev.driver),
struct clk_register_clk_parent_data_device_ctx, pdrv);
}
static int clk_register_clk_parent_data_device_probe(struct platform_device *pdev)
{
struct clk_register_clk_parent_data_device_ctx *ctx;
ctx = clk_register_clk_parent_data_driver_to_test_context(pdev);
ctx->dev = &pdev->dev;
return 0;
}
static void clk_register_clk_parent_data_device_driver(struct kunit *test)
{
struct clk_register_clk_parent_data_device_ctx *ctx = test->priv;
static const struct of_device_id match_table[] = {
{ .compatible = "test,clk-parent-data" },
{ }
};
ctx->pdrv.probe = clk_register_clk_parent_data_device_probe;
ctx->pdrv.driver.of_match_table = match_table;
ctx->pdrv.driver.name = __func__;
ctx->pdrv.driver.owner = THIS_MODULE;
KUNIT_ASSERT_EQ(test, 0, kunit_platform_driver_register(test, &ctx->pdrv));
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx->dev);
}
static const struct clk_register_clk_parent_data_test_case
clk_register_clk_parent_data_device_cases[] = {
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::index.
*/
.desc = "clk_parent_data_device_index_test",
.pdata.index = 1,
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::fwname.
*/
.desc = "clk_parent_data_device_fwname_test",
.pdata.fw_name = CLK_PARENT_DATA_PARENT2,
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::name.
*/
.desc = "clk_parent_data_device_name_test",
/* The index must be negative to indicate firmware not used */
.pdata.index = -1,
.pdata.name = CLK_PARENT_DATA_50MHZ_NAME,
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::{fw_name,name}.
*/
.desc = "clk_parent_data_device_fwname_name_test",
.pdata.fw_name = CLK_PARENT_DATA_PARENT2,
.pdata.name = "not_matching",
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::{index,name}. Index
* takes priority.
*/
.desc = "clk_parent_data_device_index_name_priority_test",
.pdata.index = 1,
.pdata.name = "not_matching",
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::{index,fwname,name}.
* The fw_name takes priority over index and name.
*/
.desc = "clk_parent_data_device_index_fwname_name_priority_test",
.pdata.index = 0,
.pdata.fw_name = CLK_PARENT_DATA_PARENT2,
.pdata.name = "not_matching",
},
};
KUNIT_ARRAY_PARAM(clk_register_clk_parent_data_device_test,
clk_register_clk_parent_data_device_cases,
clk_register_clk_parent_data_test_case_to_desc)
/*
* Test that a clk registered with a struct device can find a parent based on
* struct clk_parent_data when the hw member isn't set.
*/
static void clk_register_clk_parent_data_device_test(struct kunit *test)
{
struct clk_register_clk_parent_data_device_ctx *ctx;
const struct clk_register_clk_parent_data_test_case *test_param;
struct clk_hw *parent_hw;
struct clk_init_data init = { };
struct clk *expected_parent, *actual_parent;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
test->priv = ctx;
clk_register_clk_parent_data_device_driver(test);
expected_parent = clk_get_kunit(test, ctx->dev, "50");
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, expected_parent);
test_param = test->param_value;
init.parent_data = &test_param->pdata;
init.num_parents = 1;
init.name = "parent_data_device_test_clk";
init.ops = &clk_dummy_single_parent_ops;
ctx->hw.init = &init;
KUNIT_ASSERT_EQ(test, 0, clk_hw_register_kunit(test, ctx->dev, &ctx->hw));
parent_hw = clk_hw_get_parent(&ctx->hw);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent_hw);
actual_parent = clk_hw_get_clk_kunit(test, parent_hw, __func__);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, actual_parent);
KUNIT_EXPECT_TRUE(test, clk_is_match(expected_parent, actual_parent));
}
static const struct clk_register_clk_parent_data_test_case
clk_register_clk_parent_data_device_hw_cases[] = {
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::hw.
*/
.desc = "clk_parent_data_device_hw_index_test",
/* The index must be negative to indicate firmware not used */
.pdata.index = -1,
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::hw when
* struct clk_parent_data::fw_name is set.
*/
.desc = "clk_parent_data_device_hw_fwname_test",
.pdata.fw_name = CLK_PARENT_DATA_PARENT2,
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::hw when struct
* clk_parent_data::name is set.
*/
.desc = "clk_parent_data_device_hw_name_test",
/* The index must be negative to indicate firmware not used */
.pdata.index = -1,
.pdata.name = CLK_PARENT_DATA_50MHZ_NAME,
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::hw when struct
* clk_parent_data::{fw_name,name} are set.
*/
.desc = "clk_parent_data_device_hw_fwname_name_test",
.pdata.fw_name = CLK_PARENT_DATA_PARENT2,
.pdata.name = "not_matching",
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::hw when struct
* clk_parent_data::index is set. The hw pointer takes
* priority.
*/
.desc = "clk_parent_data_device_hw_index_priority_test",
.pdata.index = 0,
},
{
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::hw when
* struct clk_parent_data::{index,fwname,name} are set.
* The hw pointer takes priority over everything else.
*/
.desc = "clk_parent_data_device_hw_index_fwname_name_priority_test",
.pdata.index = 0,
.pdata.fw_name = CLK_PARENT_DATA_PARENT2,
.pdata.name = "not_matching",
},
};
KUNIT_ARRAY_PARAM(clk_register_clk_parent_data_device_hw_test,
clk_register_clk_parent_data_device_hw_cases,
clk_register_clk_parent_data_test_case_to_desc)
/*
* Test that a clk registered with a struct device can find a
* parent based on struct clk_parent_data::hw.
*/
static void clk_register_clk_parent_data_device_hw_test(struct kunit *test)
{
struct clk_register_clk_parent_data_device_ctx *ctx;
const struct clk_register_clk_parent_data_test_case *test_param;
struct clk_dummy_context *parent;
struct clk_hw *parent_hw;
struct clk_parent_data pdata = { };
struct clk_init_data init = { };
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
test->priv = ctx;
clk_register_clk_parent_data_device_driver(test);
parent = kunit_kzalloc(test, sizeof(*parent), GFP_KERNEL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
parent_hw = &parent->hw;
parent_hw->init = CLK_HW_INIT_NO_PARENT("parent-clk",
&clk_dummy_rate_ops, 0);
KUNIT_ASSERT_EQ(test, 0, clk_hw_register_kunit(test, ctx->dev, parent_hw));
test_param = test->param_value;
memcpy(&pdata, &test_param->pdata, sizeof(pdata));
pdata.hw = parent_hw;
init.parent_data = &pdata;
init.num_parents = 1;
init.ops = &clk_dummy_single_parent_ops;
init.name = "parent_data_device_hw_test_clk";
ctx->hw.init = &init;
KUNIT_ASSERT_EQ(test, 0, clk_hw_register_kunit(test, ctx->dev, &ctx->hw));
KUNIT_EXPECT_PTR_EQ(test, parent_hw, clk_hw_get_parent(&ctx->hw));
}
static struct kunit_case clk_register_clk_parent_data_device_test_cases[] = {
KUNIT_CASE_PARAM(clk_register_clk_parent_data_device_test,
clk_register_clk_parent_data_device_test_gen_params),
KUNIT_CASE_PARAM(clk_register_clk_parent_data_device_hw_test,
clk_register_clk_parent_data_device_hw_test_gen_params),
{}
};
static int clk_register_clk_parent_data_device_init(struct kunit *test)
{
KUNIT_ASSERT_EQ(test, 0,
of_overlay_apply_kunit(test, kunit_clk_parent_data_test));
return 0;
}
/*
* Test suite for registering clks with struct clk_parent_data and a struct
* device.
*/
static struct kunit_suite clk_register_clk_parent_data_device_suite = {
.name = "clk_register_clk_parent_data_device",
.init = clk_register_clk_parent_data_device_init,
.test_cases = clk_register_clk_parent_data_device_test_cases,
};
struct clk_assigned_rates_context {
struct clk_dummy_context clk0;
struct clk_dummy_context clk1;
};
/*
* struct clk_assigned_rates_test_param - Test parameters for clk_assigned_rates test
* @desc: Test description
* @overlay_begin: Pointer to start of DT overlay to apply for test
* @overlay_end: Pointer to end of DT overlay to apply for test
* @rate0: Initial rate of first clk
* @rate1: Initial rate of second clk
* @consumer_test: true if a consumer is being tested
*/
struct clk_assigned_rates_test_param {
const char *desc;
u8 *overlay_begin;
u8 *overlay_end;
unsigned long rate0;
unsigned long rate1;
bool consumer_test;
};
#define TEST_PARAM_OVERLAY(overlay_name) \
.overlay_begin = of_overlay_begin(overlay_name), \
.overlay_end = of_overlay_end(overlay_name)
static void
clk_assigned_rates_register_clk(struct kunit *test,
struct clk_dummy_context *ctx,
struct device_node *np, const char *name,
unsigned long rate)
{
struct clk_init_data init = { };
init.name = name;
init.ops = &clk_dummy_rate_ops;
ctx->hw.init = &init;
ctx->rate = rate;
KUNIT_ASSERT_EQ(test, 0, of_clk_hw_register_kunit(test, np, &ctx->hw));
KUNIT_ASSERT_EQ(test, ctx->rate, rate);
}
/*
* Does most of the work of the test:
*
* 1. Apply the overlay to test
* 2. Register the clk or clks to test
* 3. Register the clk provider
* 4. Apply clk defaults to the consumer device if this is a consumer test
*
* The tests will set different test_param values to test different scenarios
* and validate that in their test functions.
*/
static int clk_assigned_rates_test_init(struct kunit *test)
{
struct device_node *np, *consumer;
struct clk_hw_onecell_data *data;
struct clk_assigned_rates_context *ctx;
u32 clk_cells;
const struct clk_assigned_rates_test_param *test_param;
test_param = test->param_value;
KUNIT_ASSERT_EQ(test, 0, __of_overlay_apply_kunit(test,
test_param->overlay_begin,
test_param->overlay_end));
KUNIT_ASSERT_NOT_ERR_OR_NULL(test,
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL));
test->priv = ctx;
KUNIT_ASSERT_NOT_ERR_OR_NULL(test,
np = of_find_compatible_node(NULL, NULL, "test,clk-assigned-rates"));
of_node_put_kunit(test, np);
KUNIT_ASSERT_EQ(test, 0, of_property_read_u32(np, "#clock-cells", &clk_cells));
/* Only support #clock-cells = <0> or <1> */
KUNIT_ASSERT_LT(test, clk_cells, 2);
clk_assigned_rates_register_clk(test, &ctx->clk0, np,
"test_assigned_rate0", test_param->rate0);
if (clk_cells == 0) {
KUNIT_ASSERT_EQ(test, 0,
of_clk_add_hw_provider_kunit(test, np, of_clk_hw_simple_get,
&ctx->clk0.hw));
} else if (clk_cells == 1) {
clk_assigned_rates_register_clk(test, &ctx->clk1, np,
"test_assigned_rate1", test_param->rate1);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test,
data = kunit_kzalloc(test, struct_size(data, hws, 2), GFP_KERNEL));
data->num = 2;
data->hws[0] = &ctx->clk0.hw;
data->hws[1] = &ctx->clk1.hw;
KUNIT_ASSERT_EQ(test, 0,
of_clk_add_hw_provider_kunit(test, np, of_clk_hw_onecell_get, data));
}
/* Consumers are optional */
if (test_param->consumer_test) {
KUNIT_ASSERT_NOT_ERR_OR_NULL(test,
consumer = of_find_compatible_node(NULL, NULL, "test,clk-consumer"));
of_node_put_kunit(test, consumer);
KUNIT_ASSERT_EQ(test, 0, of_clk_set_defaults(consumer, false));
}
return 0;
}
static void clk_assigned_rates_assigns_one(struct kunit *test)
{
struct clk_assigned_rates_context *ctx = test->priv;
KUNIT_EXPECT_EQ(test, ctx->clk0.rate, ASSIGNED_RATES_0_RATE);
}
static void clk_assigned_rates_assigns_multiple(struct kunit *test)
{
struct clk_assigned_rates_context *ctx = test->priv;
KUNIT_EXPECT_EQ(test, ctx->clk0.rate, ASSIGNED_RATES_0_RATE);
KUNIT_EXPECT_EQ(test, ctx->clk1.rate, ASSIGNED_RATES_1_RATE);
}
static void clk_assigned_rates_skips(struct kunit *test)
{
struct clk_assigned_rates_context *ctx = test->priv;
const struct clk_assigned_rates_test_param *test_param = test->param_value;
KUNIT_EXPECT_NE(test, ctx->clk0.rate, ASSIGNED_RATES_0_RATE);
KUNIT_EXPECT_EQ(test, ctx->clk0.rate, test_param->rate0);
}
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_one);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_one_consumer);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_u64_one);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_u64_one_consumer);
/* Test cases that assign one rate */
static const struct clk_assigned_rates_test_param clk_assigned_rates_assigns_one_test_params[] = {
{
/*
* Test that a single cell assigned-clock-rates property
* assigns the rate when the property is in the provider.
*/
.desc = "provider assigns",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_one),
},
{
/*
* Test that a single cell assigned-clock-rates property
* assigns the rate when the property is in the consumer.
*/
.desc = "consumer assigns",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_one_consumer),
.consumer_test = true,
},
{
/*
* Test that a single cell assigned-clock-rates-u64 property
* assigns the rate when the property is in the provider.
*/
.desc = "provider assigns u64",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_u64_one),
},
{
/*
* Test that a single cell assigned-clock-rates-u64 property
* assigns the rate when the property is in the consumer.
*/
.desc = "consumer assigns u64",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_u64_one_consumer),
.consumer_test = true,
},
};
KUNIT_ARRAY_PARAM_DESC(clk_assigned_rates_assigns_one,
clk_assigned_rates_assigns_one_test_params, desc)
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_multiple);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_multiple_consumer);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_u64_multiple);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_u64_multiple_consumer);
/* Test cases that assign multiple rates */
static const struct clk_assigned_rates_test_param clk_assigned_rates_assigns_multiple_test_params[] = {
{
/*
* Test that a multiple cell assigned-clock-rates property
* assigns the rates when the property is in the provider.
*/
.desc = "provider assigns",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_multiple),
},
{
/*
* Test that a multiple cell assigned-clock-rates property
* assigns the rates when the property is in the consumer.
*/
.desc = "consumer assigns",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_multiple_consumer),
.consumer_test = true,
},
{
/*
* Test that a single cell assigned-clock-rates-u64 property
* assigns the rate when the property is in the provider.
*/
.desc = "provider assigns u64",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_u64_multiple),
},
{
/*
* Test that a multiple cell assigned-clock-rates-u64 property
* assigns the rates when the property is in the consumer.
*/
.desc = "consumer assigns u64",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_u64_multiple_consumer),
.consumer_test = true,
},
};
KUNIT_ARRAY_PARAM_DESC(clk_assigned_rates_assigns_multiple,
clk_assigned_rates_assigns_multiple_test_params,
desc)
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_without);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_without_consumer);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_zero);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_zero_consumer);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_null);
OF_OVERLAY_DECLARE(kunit_clk_assigned_rates_null_consumer);
/* Test cases that skip changing the rate due to malformed DT */
static const struct clk_assigned_rates_test_param clk_assigned_rates_skips_test_params[] = {
{
/*
* Test that an assigned-clock-rates property without an assigned-clocks
* property fails when the property is in the provider.
*/
.desc = "provider missing assigned-clocks",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_without),
.rate0 = 3000,
},
{
/*
* Test that an assigned-clock-rates property without an assigned-clocks
* property fails when the property is in the consumer.
*/
.desc = "consumer missing assigned-clocks",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_without_consumer),
.rate0 = 3000,
.consumer_test = true,
},
{
/*
* Test that an assigned-clock-rates property of zero doesn't
* set a rate when the property is in the provider.
*/
.desc = "provider assigned-clock-rates of zero",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_zero),
.rate0 = 3000,
},
{
/*
* Test that an assigned-clock-rates property of zero doesn't
* set a rate when the property is in the consumer.
*/
.desc = "consumer assigned-clock-rates of zero",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_zero_consumer),
.rate0 = 3000,
.consumer_test = true,
},
{
/*
* Test that an assigned-clocks property with a null phandle
* doesn't set a rate when the property is in the provider.
*/
.desc = "provider assigned-clocks null phandle",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_null),
.rate0 = 3000,
},
{
/*
* Test that an assigned-clocks property with a null phandle
* doesn't set a rate when the property is in the consumer.
*/
.desc = "provider assigned-clocks null phandle",
TEST_PARAM_OVERLAY(kunit_clk_assigned_rates_null_consumer),
.rate0 = 3000,
.consumer_test = true,
},
};
KUNIT_ARRAY_PARAM_DESC(clk_assigned_rates_skips,
clk_assigned_rates_skips_test_params,
desc)
static struct kunit_case clk_assigned_rates_test_cases[] = {
KUNIT_CASE_PARAM(clk_assigned_rates_assigns_one,
clk_assigned_rates_assigns_one_gen_params),
KUNIT_CASE_PARAM(clk_assigned_rates_assigns_multiple,
clk_assigned_rates_assigns_multiple_gen_params),
KUNIT_CASE_PARAM(clk_assigned_rates_skips,
clk_assigned_rates_skips_gen_params),
{}
};
/*
* Test suite for assigned-clock-rates{-u64} DT property.
*/
static struct kunit_suite clk_assigned_rates_suite = {
.name = "clk_assigned_rates",
.test_cases = clk_assigned_rates_test_cases,
.init = clk_assigned_rates_test_init,
};
kunit_test_suites(
&clk_assigned_rates_suite,
&clk_leaf_mux_set_rate_parent_test_suite,
&clk_test_suite,
&clk_multiple_parents_mux_test_suite,
&clk_mux_no_reparent_test_suite,
&clk_mux_notifier_test_suite,
&clk_orphan_transparent_multiple_parent_mux_test_suite,
&clk_orphan_transparent_single_parent_test_suite,
&clk_orphan_two_level_root_last_test_suite,
&clk_range_test_suite,
&clk_range_maximize_test_suite,
&clk_range_minimize_test_suite,
&clk_register_clk_parent_data_of_suite,
&clk_register_clk_parent_data_device_suite,
&clk_single_parent_mux_test_suite,
&clk_uncached_test_suite,
);
MODULE_DESCRIPTION("Kunit tests for clk framework");
MODULE_LICENSE("GPL v2");